This check has been hanging out since we used to have parallel paths to add
dentry in nfs_create(), but that hasn't been the case for some years.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Since commit b0c6108ecf ("nfs_instantiate(): prevent multiple aliases for
directory inode"), nfs_instantiate() may succeed without actually
instantiating the dentry that was passed in. That can be problematic for
some callers in NFSv3, so this patch breaks things up so we can get the
actual dentry obtained.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the congestion window closes just as the transport disconnects,
a reconnect is never driven because:
1. The XPRT_CONG_WAIT flag prevents tasks from taking the write lock
2. There's no wake-up of the first task on the xprt->sending queue
To address this, clear the congestion wait flag as part of
completing a disconnect.
Fixes: 75891f502f ("SUNRPC: Support for congestion control ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the copy of the RPC reply into our buffers did not complete, and
we could end up with a truncated message. In that case, just resend
the call.
Fixes: a0584ee9ae ("SUNRPC: Use struct xdr_stream when decoding...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Let the name reflect the single use. The function now assumes the GSS MIC
is the last object in the buffer.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The GSS Message Integrity Check data for krb5i may lie partially in the XDR
reply buffer's pages and tail. If so, we try to copy the entire MIC into
free space in the tail. But as the estimations of the slack space required
for authentication and verification have improved there may be less free
space in the tail to complete this copy -- see commit 2c94b8eca1
("SUNRPC: Use au_rslack when computing reply buffer size"). In fact, there
may only be room in the tail for a single copy of the MIC, and not part of
the MIC and then another complete copy.
The real world failure reported is that `ls` of a directory on NFS may
sometimes return -EIO, which can be traced back to xdr_buf_read_netobj()
failing to find available free space in the tail to copy the MIC.
Fix this by checking for the case of the MIC crossing the boundaries of
head, pages, and tail. If so, shift the buffer until the MIC is contained
completely within the pages or tail. This allows the remainder of the
function to create a sub buffer that directly address the complete MIC.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Cc: stable@vger.kernel.org # v5.1
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Ensure that we set task->tk_rpc_status for all RPC level errors so that
the caller can distinguish between those and server reply status errors.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If we've removed the request from the receive list, and have added
it back after resetting the request receive buffer, then we should
only receive message data if it is a new reply (i.e. if
transport->recv.copied is zero).
Fixes: 277e4ab7d5 ("SUNRPC: Simplify TCP receive code by switching...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Ensure that we dequeue the request from the transport receive queue
while we're re-encoding to prevent issues like use-after-free when
we release the bvec.
Fixes: 7536908982 ("SUNRPC: Ensure the bvecs are reset when we re-encode...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Eli Dorfman reports that after a series of idle disconnects, an
RPC/RDMA transport becomes unusable (rdma_create_qp returns
-ENOMEM). Problem was tracked down to increasing Send Queue size
after each reconnect.
The rdma_create_qp() API does not promise to leave its @qp_init_attr
parameter unaltered. In fact, some drivers do modify one or more of
its fields. Thus our calls to rdma_create_qp must use a fresh copy
of ib_qp_init_attr each time.
This fix is appropriate for kernels dating back to late 2007, though
it will have to be adapted, as the connect code has changed over the
years.
Reported-by: Eli Dorfman <eli@vastdata.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Ensure that the re-establishment delay does not grow exponentially
on each good reconnect. This probably should have been part of
commit 675dd90ad0 ("xprtrdma: Modernize ops->connect").
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The optimization done in "xprtrdma: Simplify rpcrdma_mr_pop" was a
bit too optimistic. MRs left over after a reconnect still need to
be recycled, not added back to the free list, since they could be
in flight or actually fully registered.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We need to use the custom rpc_task_setup here to set the
RPC_TASK_NO_ROUND_ROBIN flag on the RPC call.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
An async call followed by an rpc_wait_for_completion() is basically the
same as a synchronous call, so we can use nfs4_call_sync_custom() to
keep our custom callback ops and the RPC_TASK_NO_ROUND_ROBIN flag.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
There are a few cases where we need to manually configure the
rpc_task_setup structure to get the behavior we want.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In nfs4_try_migration(), if nfs4_begin_drain_session() fails, the
previously allocated 'page' and 'locations' are not deallocated, leading to
memory leaks. To fix this issue, go to the 'out' label to free 'page' and
'locations' before returning the error.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Micro-optimization: In rpcrdma_post_recvs, since commit e340c2d6ef
("xprtrdma: Reduce the doorbell rate (Receive)"), the common case is
to return without doing anything. Found with perf.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Micro-optimization: Save the cost of three function calls during
transport header encoding.
These were "noinline" before to generate more meaningful call stacks
during debugging, but this code is now pretty stable.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
For the moment the returned value just happens to be correct because
the current backchannel server implementation does not vary the
number of credits it offers. The spec does permit this value to
change during the lifetime of a connection, however.
The actual maximum is fixed for all RPC/RDMA transports, because
each transport instance has to pre-allocate the resources for
processing BC requests. That's the value that should be returned.
Fixes: 7402a4fedc ("SUNRPC: Fix up backchannel slot table ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: The function name should match the documenting comment.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
rpcrdma_rep objects are removed from their free list by only a
single thread: the Receive completion handler. Thus that free list
can be converted to an llist, where a single-threaded consumer and
a multi-threaded producer (rpcrdma_buffer_put) can both access the
llist without the need for any serialization.
This eliminates spin lock contention between the Receive completion
handler and rpcrdma_buffer_get, and makes the rep consumer wait-
free.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Now that the free list is used sparingly, get rid of the
separate spin lock protecting it.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Instead of a globally-contended MR free list, cache MRs in each
rpcrdma_req as they are released. This means acquiring and releasing
an MR will be lock-free in the common case, even outside the
transport send lock.
The original idea of per-rpcrdma_req MR free lists was suggested by
Shirley Ma <shirley.ma@oracle.com> several years ago. I just now
figured out how to make that idea work with on-demand MR allocation.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Probably would be good to also pass GFP flags to ib_alloc_mr.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Refactor: Retrieve an MR and handle error recovery entirely in
rpc_rdma.c, as this is not a device-specific function.
Note that since commit 89f90fe1ad ("SUNRPC: Allow calls to
xprt_transmit() to drain the entire transmit queue"), the
xprt_transmit function handles the cond_resched. The transport no
longer has to do this itself.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up. There is only one remaining rpcrdma_mr_put call site, and
it can be directly replaced with unmap_and_put because mr->mr_dir is
set to DMA_NONE just before the call.
Now all the call sites do a DMA unmap, and we can just rename
mr_unmap_and_put to mr_put, which nicely matches mr_get.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: rpcrdma_mr_pop call sites check if the list is empty
first. Let's replace the list_empty with less costly logic.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit 48be539dd4 ("xprtrdma: Introduce ->alloc_slot call-out for
xprtrdma") added a separate alloc_slot and free_slot to the RPC/RDMA
transport. Later, commit 75891f502f ("SUNRPC: Support for
congestion control when queuing is enabled") modified the generic
alloc/free_slot methods, but neglected the methods in xprtrdma.
Found via code review.
Fixes: 75891f502f ("SUNRPC: Support for congestion control ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: There are other "all" list heads. For code clarity
distinguish this one as for use only for MRs by renaming it.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Make the field name the same for all trace points that handle
pointers to struct rpcrdma_rep. That makes it easy to grep for
matching rep points in trace output.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
I've heard rumors of an NFS/RDMA server implementation that has a
default credit limit of 1024. The client's default setting remains
at 128.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Although I haven't seen any performance results that justify it,
I've received several complaints that NFS/RDMA no longer supports
a maximum rsize and wsize of 1MB. These days it is somewhat smaller.
To simplify the logic that determines whether a chunk list is
necessary, the implementation uses a fixed maximum size of the
transport header. Currently that maximum size is 256 bytes, one
quarter of the default inline threshold size for RPC/RDMA v1.
Since commit a78868497c ("xprtrdma: Reduce max_frwr_depth"), the
size of chunks is also smaller to take advantage of inline page
lists in device internal MR data structures.
The combination of these two design choices has reduced the maximum
NFS rsize and wsize that can be used for most RNIC/HCAs. Increasing
the maximum transport header size and the maximum number of RDMA
segments it can contain increases the negotiated maximum rsize/wsize
on common RNIC/HCAs.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit 302d3deb20 ("xprtrdma: Prevent inline overflow") added this
calculation back in 2016, but got it wrong. I tested only the lower
bound, which is why there is a max_t there. The upper bound should be
rounded up too.
Now, when using DIV_ROUND_UP, that takes care of the lower bound as
well.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Comment was made obsolete by commit 8cec3dba76 ("xprtrdma:
rpcrdma_regbuf alignment").
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Things have changed since this comment was written. In particular,
the reworking of connection closing, on-demand creation of MRs, and
the removal of fr_state all mean that deferring MR recovery to
frwr_map is no longer needed. The description is obsolete.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Micro-optimization: For xdr_commit_encode call sites in
net/sunrpc/xdr.c, eliminate the extra calling sequence. On my
client, this change saves about a microsecond for every 30 calls
to xdr_reserve_space().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: commit c544577dad ("SUNRPC: Clean up transport write
space handling") appears to have removed the last caller of
rpc_wake_up_queued_task_on_wq().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In encode_attrs(), there is an if statement on line 1145 to check
whether label is NULL:
if (label && (attrmask[2] & FATTR4_WORD2_SECURITY_LABEL))
When label is NULL, it is used on lines 1178-1181:
*p++ = cpu_to_be32(label->lfs);
*p++ = cpu_to_be32(label->pi);
*p++ = cpu_to_be32(label->len);
p = xdr_encode_opaque_fixed(p, label->label, label->len);
To fix these bugs, label is checked before being used.
These bugs are found by a static analysis tool STCheck written by us.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
- spi-nor: Fix to correctly set the WP pin
-----BEGIN PGP SIGNATURE-----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=AzKU
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD fix from Richard Weinberger:
"A single fix for MTD to correctly set the spi-nor WP pin"
* tag 'fixes-for-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: spi-nor: Fix the disabling of write protection at init
-----BEGIN PGP SIGNATURE-----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=ovM7
-----END PGP SIGNATURE-----
Merge tag 'for-5.3-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Two fixes that popped up during testing:
- fix for sysfs-related code that adds/removes block groups, warnings
appear during several fstests in connection with sysfs updates in
5.3, the fix essentially replaces a workaround with scope NOFS and
applies to 5.2-based branch too
- add sanity check of trim range"
* tag 'for-5.3-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: trim: Check the range passed into to prevent overflow
Btrfs: fix sysfs warning and missing raid sysfs directories
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for x86:
- Fix the inconsistent error handling in the umwait init code
- Rework the boot param zeroing so gcc9 stops complaining about out
of bound memset. The resulting source code is actually more sane to
read than the smart solution we had
- Maintainers update so Tony gets involved when Intel models are
added
- Some more fallthrough fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Save fields explicitly, zero out everything else
MAINTAINERS, x86/CPU: Tony Luck will maintain asm/intel-family.h
x86/fpu/math-emu: Address fallthrough warnings
x86/apic/32: Fix yet another implicit fallthrough warning
x86/umwait: Fix error handling in umwait_init()
Pull EFI fix from Thomas Gleixner:
"A single fix for a EFI mixed mode regression caused by recent rework
which did not take the firmware bitwidth into account"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi-stub: Fix get_efi_config_table on mixed-mode setups
Here are 4 small SPDX fixes for 5.3-rc5. A few style fixes for some
SPDX comments, added an SPDX tag for one file, and fix up some GPL
boilerplate for another file.
All of these have been in linux-next for a few weeks with no reported
issues (they are comment changes only, so that's to be expected...)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXVkVSg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yneygCfdBxdIl98qXA2SRDLeKl/PkSJH1gAoLwnkoKq
WK/gN0IMFf25UrItBsGe
=b31n
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX fixes from Greg KH:
"Here are four small SPDX fixes for 5.3-rc5.
A few style fixes for some SPDX comments, added an SPDX tag for one
file, and fix up some GPL boilerplate for another file.
All of these have been in linux-next for a few weeks with no reported
issues (they are comment changes only, so that's to be expected...)"
* tag 'spdx-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
i2c: stm32: Use the correct style for SPDX License Identifier
intel_th: Use the correct style for SPDX License Identifier
coccinelle: api/atomic_as_refcounter: add SPDX License Identifier
kernel/configs: Replace GPL boilerplate code with SPDX identifier
Here are some small char and misc driver fixes for 5.3-rc5.
These are two different subsystems needing some fixes, the habanalabs
driver which is has some more big endian fixes for problems found. The
other are some small soundwire fixes, including some Kconfig
dependencies needed to resolve reported build errors.
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXVkQPw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym1sACePhtyIBmmKjWfN/j/RRiUTCjx9k8AoIXUzKY0
qg8p1RnTK6PaLruKz6qz
=xrwH
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char and misc driver fixes for 5.3-rc5.
These are two different subsystems needing some fixes, the habanalabs
driver which is has some more big endian fixes for problems found. The
other are some small soundwire fixes, including some Kconfig
dependencies needed to resolve reported build errors.
All of these have been in linux-next this week with no reported
issues"
* tag 'char-misc-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc: xilinx-sdfec: fix dependency and build error
habanalabs: fix device IRQ unmasking for BE host
habanalabs: fix endianness handling for internal QMAN submission
habanalabs: fix completion queue handling when host is BE
habanalabs: fix endianness handling for packets from user
habanalabs: fix DRAM usage accounting on context tear down
habanalabs: Avoid double free in error flow
soundwire: fix regmap dependencies and align with other serial links
soundwire: cadence_master: fix definitions for INTSTAT0/1
soundwire: cadence_master: fix register definition for SLAVE_STATE
Here are 4 small staging and iio driver fixes for 5.3-rc5
Two are for the dt3000 comedi driver for some reported problems found in
that codebase, and two are some small iio fixes.
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXVkO4w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylBMQCaAoq34gPVhedcR2cA2BeAcf4CpjAAn224DdGw
Xkh8oXn1fdrgbdbX1biP
=PQLD
-----END PGP SIGNATURE-----
Merge tag 'staging-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO fixes from Greg KH:
"Here are four small staging and iio driver fixes for 5.3-rc5
Two are for the dt3000 comedi driver for some reported problems found
in that codebase, and two are some small iio fixes.
All of these have been in linux-next this week with no reported
issues"
* tag 'staging-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: comedi: dt3000: Fix rounding up of timer divisor
staging: comedi: dt3000: Fix signed integer overflow 'divider * base'
iio: adc: max9611: Fix temperature reading in probe
iio: frequency: adf4371: Fix output frequency setting