Граф коммитов

233 Коммитов

Автор SHA1 Сообщение Дата
Linus Walleij f4b89764c4 dmaengine/ste_dma40: use AMBA PrimeCell helper macros
The DMA40 is not a PrimeCell from ARM, but it still use the same
ID registers. So let's utilize the existing macros in the
PrimeCell header to identify manufacturer and revision of the IP
block instead of reinventing the wheel.

Cc: Robert Marklund <robert.marklund@stericsson.com>
Cc: Per Forlin <per.forlin@linaro.org>
Cc: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-14 04:09:10 +05:30
Robert Marklund 79ca7ec3d1 dmaengine/ste_dma40: make the cyclic alloc NOWAIT
This function may be initiated from IRQ context, so the allocation
must allocate NOWAIT memory.

Signed-off-by: Robert Marklund <robert.marklund@stericsson.com>
Reviewed-by: Rabin Vincent <rabin.vincent@stericsson.com>
Reviewed-by: Philippe Langlais <philippe.langlais@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-14 04:09:10 +05:30
om prakash ae752bf4cb dmaengine/ste_dma40: fix missing kernel-doc
Missing documentation creates kernel-doc warnings, so add
the documenation.

Signed-off-by: Om Prakash <omprakash.pal@stericsson.com>
Reviewed-by: Rabin Vincent <rabin.vincent@stericsson.com>
Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com>
Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-14 04:09:10 +05:30
Per Forlin a8f3067bce dmaengine/ste_dma40: add a separate queue for pending requests
tx_submit will add descriptors to the pending queue. Issue pending
will then move the pending descriptors to the transfer queue.

Signed-off-by: Per Forlin <per.forlin@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-07-14 04:02:08 +05:30
Alexey Dobriyan b7f080cfe2 net: remove mm.h inclusion from netdevice.h
Remove linux/mm.h inclusion from netdevice.h -- it's unused (I've checked manually).

To prevent mm.h inclusion via other channels also extract "enum dma_data_direction"
definition into separate header. This tiny piece is what gluing netdevice.h with mm.h
via "netdevice.h => dmaengine.h => dma-mapping.h => scatterlist.h => mm.h".
Removal of mm.h from scatterlist.h was tried and was found not feasible
on most archs, so the link was cutoff earlier.

Hope people are OK with tiny include file.

Note, that mm_types.h is still dragged in, but it is a separate story.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-21 19:17:20 -07:00
Linus Torvalds 4cb865deec Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (33 commits)
  x86: poll waiting for I/OAT DMA channel status
  maintainers: add dma engine tree details
  dmaengine: add TODO items for future work on dma drivers
  dmaengine: Add API documentation for slave dma usage
  dmaengine/dw_dmac: Update maintainer-ship
  dmaengine: move link order
  dmaengine/dw_dmac: implement pause and resume in dwc_control
  dmaengine/dw_dmac: Replace spin_lock* with irqsave variants and enable submission from callback
  dmaengine/dw_dmac: Divide one sg to many desc, if sg len is greater than DWC_MAX_COUNT
  dmaengine/dw_dmac: set residue as total len in dwc_tx_status if status is !DMA_SUCCESS
  dmaengine/dw_dmac: don't call callback routine in case dmaengine_terminate_all() is called
  dmaengine: at_hdmac: pause: no need to wait for FIFO empty
  pch_dma: modify pci device table definition
  pch_dma: Support new device ML7223 IOH
  pch_dma: Support I2S for ML7213 IOH
  pch_dma: Fix DMA setting issue
  pch_dma: modify for checkpatch
  pch_dma: fix dma direction issue for ML7213 IOH video-in
  dmaengine: at_hdmac: use descriptor chaining help function
  dmaengine: at_hdmac: implement pause and resume in atc_control
  ...

Fix up trivial conflict in drivers/dma/dw_dmac.c
2011-05-28 12:35:15 -07:00
Linus Walleij a0eb221a44 dmaengine: move link order
Move the dmaengine subsystem up early in the drivers Makefile so
DMA is made available early to all drivers, just like e.g.
regulators. Now even regulators can use DMA on the same initlevel.
As a result we can bump the ste_dma40 and coh901318 dmaengine
drivers down one initlevel to subsys_init().

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-19 16:56:26 +05:30
Philippe Langlais 711b9cea92 dmaengine/ste_dma40: fix introduced warnings
The compiler nowadays moans about possibly non-assigned variable.
Fix this by default-assigning 0.

Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-09 11:24:17 +05:30
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
Rabin Vincent 0c842b5510 dma40: cyclic xfer support
Support cyclic transfers, which are useful for ALSA drivers.

Acked-by: Per Forlin <per.forlin@stericsson.com>
Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30 22:27:21 -08:00
Rabin Vincent 86eb5fb611 dma40: stop ongoing transfers in DMA_TERMINATE_ALL
The current implementation of DMA_TERMINATE_ALL leaves ongoing transfers
running.  Fix it.

Acked-by: Per Forlin <per.forlin@stericsson.com>
Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30 22:27:21 -08:00
Rabin Vincent 7ad74a7cf6 dma40: fix DMA_SG capability and channels
The DMA_SG cap is enabled on the wrong channel, and the pointers are repeatedly
set incorrectly.  Fix it and combine the ops settings to a common function.

Acked-by: Per Forlin <per.forlin@stericsson.com>
Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30 22:27:21 -08:00
Rabin Vincent 6045f0bb28 dma40: handle failure to allocate first LCLA
Acked-by: Per Forlin <per.forlin@stericsson.com>
Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30 22:27:21 -08:00
Rabin Vincent e65889c75c dma40: extract lcla code into separate function
Acked-by: Per Forlin <per.forlin@stericsson.com>
Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30 22:27:20 -08:00
Rabin Vincent 822c567639 dma40: unify src/dst addr check
Acked-by: Per Forlin <per.forlin@stericsson.com>
Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30 22:27:20 -08:00
Rabin Vincent cc31b6f794 dma40: pass the info pointer all the way to reduce argument count
Acked-by: Per Forlin <per.forlin@stericsson.com>
Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30 22:27:20 -08:00
Rabin Vincent 5ed04b8575 dma40: unify d40_log_sg_to_lli funcs for mem and slave
Acked-by: Per Forlin <per.forlin@stericsson.com>
Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30 22:27:19 -08:00
Rabin Vincent 1c4b0927fe dma40: move lli_load to main source file
These register writes are better placed in the main source file rather than
ll.c.

Acked-by: Per Forlin <per.forlin@stericsson.com>
Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30 22:27:19 -08:00
Rabin Vincent cade1d30b2 dma40: combine mem and slave prep_sg functions
Acked-by: Per Forlin <per.forlin@stericsson.com>
Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30 22:27:19 -08:00
Rabin Vincent 10a946b3a4 dma40: remove export of stedma40_memcpy_sg
The dmaengine framework has the API for this now.

Acked-by: Per Forlin <per.forlin@stericsson.com>
Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30 22:27:18 -08:00
Rabin Vincent 3e3a0763e7 dma40: combine mem and slave sg-to-lli functions
Acked-by: Per Forlin <per.forlin@stericsson.com>
Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30 22:27:18 -08:00
Rabin Vincent 00ac034148 dma40: remove duplicated dev addr code
Acked-by: Per Forlin <per.forlin@stericsson.com>
Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30 22:27:18 -08:00
Rabin Vincent dbd8878803 dma40: combine duplicated d40_pool_lli_alloc() calls
Acked-by: Per Forlin <per.forlin@stericsson.com>
Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30 22:27:18 -08:00
Rabin Vincent 5f81158f90 dma40: combine desc init functions
The desc init code can be shared between the mem and slave prep routines.

Acked-by: Per Forlin <per.forlin@stericsson.com>
Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30 22:27:18 -08:00
Rabin Vincent 95944c6ef5 dma40: implement prep_memcpy as a wrapper around memcpy_sg
To simplify the code.

Acked-by: Per Forlin <per.forlin@stericsson.com>
Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30 22:27:17 -08:00
Rabin Vincent d924abad7f dma40: remove unnecessary casts
Acked-by: Per Forlin <per.forlin@stericsson.com>
Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30 22:27:17 -08:00
Rabin Vincent b00f938c8c dma40: fix DMA API usage for LLIs
Map and unmap the LLIs and use dma_sync_single_for_device() appropriately
instead of mapping and never unmapping them.

Acked-by: Per Forlin <per.forlin@stericsson.com>
Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30 22:27:17 -08:00
Rabin Vincent 026cbc424a dma40: fix DMA API usage for LCLA
Map the buffer once and use dma_sync*() appropriately instead of mapping the
buffer over and over without unmapping it.

Acked-by: Per Forlin <per.forlin@stericsson.com>
Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30 22:27:17 -08:00
Rabin Vincent 594ece4dc0 dma40: remove unnecessary ALIGN()s
ALIGN(x * y, y) == x * y
ALIGN(aligned + x * y, y) == aligned + x * y

Acked-by: Per Forlin <per.forlin@stericsson.com>
Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30 22:27:17 -08:00
Rabin Vincent ac2c0a3871 dma40: allow realtime and priority for event lines
DB8500v2's DMA40 (revision 3) allows setting event lines as high priority and
real time.

Acked-by: Per Forlin <per.forlin@stericsson.com>
Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30 22:27:16 -08:00
Rabin Vincent 4d5949009e dma40: fix comment to refer to SOCs rather than boards
And add DB8500v2 information.

Acked-by: Per Forlin <per.forlin@stericsson.com>
Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30 22:27:16 -08:00
Rabin Vincent 6db5a8ba11 dma40: use helpers for error functions
Almost every use of dev_err in this driver prints the function name.  Abstract
out wrappers to help with this and reduce code duplication.

Acked-by: Per Forlin <per.forlin@stericsson.com>
Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30 22:27:16 -08:00
Rabin Vincent 724a8577d8 dma40: use helpers for channel type check
The somewhat confusing check

	d40c->log_num == D40_PHY_CHAN

and its variants are used in several places to check if a channel is logical or
physical.  Use appropriately named helpers to do this to make the code more
readable.

Acked-by: Per Forlin <per.forlin@stericsson.com>
Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30 22:27:16 -08:00
Rabin Vincent 8ca84687b9 dma40: use helper for channel registers base
The register offset computation for accessing channel registers is copy/pasted
in several places.  Create a helper function to do it.

Acked-by: Per Forlin <per.forlin@stericsson.com>
Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30 22:27:16 -08:00
Rabin Vincent 7d83a854a1 dma40: remove "hardware link with previous jobs" code
This link in hardware with previous jobs code is:

  - unused, no clients using or requiring this feature
  - incomplete, being implemented only for physical channels
  - broken, only working to perform one link

Remove it.  This also allows us to get rid of the channel pause in the
submit_tx() routine.

Acked-by: Per Forlin <per.forlin@stericsson.com>
Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30 22:27:15 -08:00
Rabin Vincent 262d2915d4 dma40: ensure event lines get enabled
The controller sometimes fails to register the enable of the event line when
both src and dst event lines are used on the same logical channel.  Implement
the recommended software workaround, which is to retry the write until it
works.

Acked-by: Per Forlin <per.forlin@stericsson.com>
Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30 22:27:15 -08:00
Rabin Vincent cb9ab2d8e4 dma40: make init function static
Acked-by: Per Forlin <per.forlin@stericsson.com>
Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30 22:27:15 -08:00
Per Forlin d49278e335 dmaengine: dma40: Add support to split up large elements
The maximum transfer size of the stedma40 is (64k-1) x data-width.
If the transfer size of one element exceeds this limit
the job is split up and sent as linked transfer.

Signed-off-by: Per Forlin <per.forlin@linaro.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-04 17:20:43 -08:00
Dan Williams 42e55736f7 Merge branch 'dma40' into dmaengine 2010-10-19 15:34:26 -07:00
Rabin Vincent 51f5d744ed ste_dma40: remove enum for endianess
A bool will suffice.  The default is little endian.

Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-19 15:17:07 -07:00
Rabin Vincent 20a5b6d043 ste_dma40: move mode_opt to separate config
Defaults are "basic mode" for physical channels, and "logical source
logical destination" for logical channels.

Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-19 15:17:07 -07:00
Rabin Vincent 38bdbf020a ste_dma40: move channel mode to a separate field
And keep it logical by default.

Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-19 15:17:07 -07:00
Rabin Vincent ce2ca1252b ste_dma40: add variable to indicate valid dma_cfg
Since we want to reduce the amount of required channel
configuration and remove channel_type, don't depend on it
to indicate whether the configuration is valid.

Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-19 15:17:06 -07:00
Dan Williams 6391987d6f Merge branches 'dma40', 'pl08x', 'fsldma', 'imx' and 'intel-mid' into dmaengine 2010-10-07 15:19:01 -07:00
Per Forlin 661385f9c3 DMAENGINE: Remove stedma40_set_psize and pre_transfer hook in ste_dma40
Remove obsolete pre_transfer hook in stedma40_chan_cfg. The
intent of this hook is merely to handle burst size
compensation for ux500 variant MMCI. Remove obsolete stedma40_set_psize
since it is only called from pre_transfer. DMAEngine device_control
replaces the functionality of stedma40_set_psize.

Signed-off-by: Per Forlin <per.forlin@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-07 14:56:36 -07:00
Per Forlin a59670a40b DMAENGINE: Set burst size for phy and log chans in ste_dma40 dev_control
Set burst for physical or logical channels respectively.
Convert the values in dma_cfg to dma reg bits
for physical or logical channels.

Signed-off-by: Per Forlin <per.forlin@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-07 14:56:35 -07:00
Rabin Vincent 819504f486 DMAENGINE: ste_dma40: fix resource leaks in error paths.
Fix some leaks of allocated descriptors in error paths.

Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-07 14:54:55 -07:00
Rabin Vincent a2c15fa4c1 DMAENGINE: ste_dma40: fix desc_get
Fix desc_get to alloc a descriptor from the cache if the ones in the
list are waiting for the ack.  Also, memzero the descriptor when
allocated from the list to ensure all fields are cleared.

Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-07 14:54:55 -07:00
Rabin Vincent c6134c967c DMAENGINE: ste_dma40: fix clk_get failure path
clk_get returns an ERR_PTR.

Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-07 14:54:55 -07:00
Rabin Vincent f57b407cfd DMAENGINE: ste_dma40: fix disabled channels list
The value in the array, not the index, specifies the channel to be
disabled.

Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-07 14:54:54 -07:00
Ira Snyder 0d688662aa ste_dma40: implement support for scatterlist to scatterlist copy
Now that the DMAEngine API has support for scatterlist to scatterlist
copy, implement support for the STE DMA40 DMA controller.

Cc: Linus Walleij <linus.ml.walleij@gmail.com>
Acked-by: Per Fridén <per.friden@stericsson.com>
Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-07 14:41:41 -07:00
Jonas Aaberg 3ac012af3b DMAENGINE: ste_dma40: don't pause/resume non-executing channels
There is no point in pausing what isn't running.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22 14:53:47 -07:00
Jonas Aaberg 698e4732e7 DMAENGINE: ste_dma40: rewrote LCLA entries allocation code
LLI allocation is now done on job level instead of channel level.
Previously the maximum length of a linked job in hw on a logical
channel was 8, since the LLIs where evenly divided. Now only
executing jobs have allocated LLIs which increase the length to
a maximum of 64 links in HW.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22 14:53:46 -07:00
Jonas Aaberg 69f93faa57 DMAENGINE: ste_dma40: fix possible use of uninitialized variable
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22 14:53:46 -07:00
Jonas Aaberg 9dbfbd35ce DMAENGINE: ste_dma40: corrected is_paused behavior
The handling of pause detection was slightly incorrect.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22 14:53:46 -07:00
Jonas Aaberg 767a9675c4 DMAENGINE: ste_dma40: code clean-up
This patch includes non functional code clean up changes,
file header updates and a few magic numbers got defined.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22 14:53:46 -07:00
Jonas Aaberg aa182ae262 DMAENGINE: ste_dma40: added support for link jobs in hw
If a new job is added on a physical channel that already has
a job, the new job is linked in hw to the old job instead of
queueing up the jobs.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22 14:53:45 -07:00
Jonas Aaberg 3ae0267fd5 DMAENGINE: ste_dma40: removed a few magic numbers
Make sure to extract the revision field explicitly and document
what bits are being accessed here without magic numbers.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22 14:53:45 -07:00
Jonas Aaberg 0246e77b4d DMAENGINE: ste_dma40: fix bug related to callback handling
The callback got called even when it was not supposed to. Also
removed some not needed interrupt trigger on/off code.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22 14:53:45 -07:00
Jonas Aaberg b55912c66a DMAENGINE: ste_dma40: Code clean-up and removed an unneeded suspend request
This patch cleans up some code and removes a suspend request that was pointless
since the hw was never configured nor running when it was called.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22 14:53:45 -07:00
Jonas Aaberg 1b00348d5d DMAENGINE: ste_dma40: No need reading, masking and setting a set register
Removes an unnecessary register read and a few lines of code.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22 14:53:45 -07:00
Jonas Aaberg be8cb7dfd9 DMAENGINE: ste_dma40: Fix failed to restart logical channel bug
A transfer that runs in the different direction on the same
channel will now be resumed when the other is suspend/stopped.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22 14:53:44 -07:00
Linus Walleij 0747c7bae5 DMAENGINE: ste_dma40: config checks
Added various configuration checks.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22 14:53:44 -07:00
Linus Walleij 95e1400fa1 DMAENGINE: add runtime slave config to DMA40 v3
This extends the DMA engine driver for the DMA40 used in the
U8500 platform with the generic runtime slave configuration
interface.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-08-04 14:14:05 -07:00
Linus Walleij f41855929c DMAENGINE: ste_dma40: support older silicon
This makes sure the DMA40 driver will also work on the oldest
silicon revisions that have the on-chip memory on another location
in the DB8500 and also requires explicit suspend before starting
or resuming a logical channel.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
[added parenthesis to the definition of U8500_DMA_LCPA_BASE_ED]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22 18:06:42 -07:00
Jonas Aaberg 6b7acd8442 DMAENGINE: ste_dma40: support disabling physical channels
This makes it possible to disable physical channels.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22 18:01:57 -07:00
Jonas Aaberg d181b3a8cb DMAENGINE: ste_dma40: fix suspend bug
This fixes a bug when suspending channels: first make the checks,
then suspend the channel, not the other way around.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22 18:01:56 -07:00
Linus Walleij 508849ade2 DMAENGINE: ste_dma40: allocate LCLA dynamically
Switch to allocating LCLA in memory instead of having a fixed
address.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22 18:01:55 -07:00
Jonas Aaberg 1d392a7ba4 DMAENGINE: ste_dma40: no premature stop
Correct bug that could cause paused channels to stop.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22 18:01:55 -07:00
Jonas Aaberg 2123a61e17 DMAENGINE: ste_dma40: interrupts only on dst
We don't want interrupts when the source is done, only when
the destination is done and everything is complete at the
recieveing end of a transfer.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22 18:01:55 -07:00
Jonas Aaberg 0c32269d81 DMAENGINE: ste_dma40: avoid doing unnessecary suspend
Avoid doing unnessecary suspend when modifying logical channels.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22 18:01:54 -07:00
Jonas Aaberg 2292b880e4 DMAENGINE: ste_dma40: lock fix
Fix up some locking issues found by enabling lock debugging.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22 18:01:54 -07:00
Jonas Aaberg 0d0f6b8bbb DMAENGINE: ste_dma40: deny ops on non-alloc channels
Added checks to deny operating on none-allocated channels.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22 18:01:54 -07:00
Jonas Aaberg 2a6143407d DMAENGINE: ste_dma40: various cosmetic clean-ups
This cleans up some extra newlines, removes some code duplication
and moves the code to comply better with checkpatch.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22 18:01:54 -07:00
Jonas Aaberg ff0b12baa5 DMAENGINE: ste_dma40: improve allocation error handling
Better error handling when channel allocation fails.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22 18:01:54 -07:00
Jonas Aaberg c675b1b424 DMAENGINE: ste_dma40: use kmem cache
Use kmem cache instead of own cache, reducing code duplication
and bug sources.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22 18:01:53 -07:00
Per Friden a8be8627a3 DMAENGINE: ste_dma40: moved freeing of client owned desc
fixed typo and moved freeing of client owned desc to free_dma.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22 18:01:53 -07:00
Linus Walleij ef1872ec65 DMAENGINE: ste_dma40: only write phy channel config first time
We only need to write the configuration to a physical channel if
it is free, else it is already written.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22 18:01:53 -07:00
Per Friden 941b77a3b6 DMAENGINE: ste_dma40: fixed lli_max=1 issue
Fixed lli_max=1 issue in case of full lcla, currently this case
is not properly handled.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22 18:01:53 -07:00
Linus Walleij 058276303d DMAENGINE: extend the control command to include an arg
This adds an argument to the DMAengine control function, so that
we can later provide control commands that need some external data
passed in through an argument akin to the ioctl() operation
prototype.

[dan.j.williams@intel.com: fix up some missed conversions]
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-05-17 16:30:42 -07:00
Marcin Mielczarczyk 4aed79b281 DMAENGINE: DMA40 fix for allocation of logical channel 0
Fix for allocation failure of logical channel when event line
happens to be number 0.

Signed-off-by: Marcin Mielczarczyk <marcin.mielczarczyk@tieto.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-05-17 15:45:06 -07:00
Jonas Aaberg a5ebca4769 DMAENGINE: DMA40 support paused channel status
Support determining whether a channel is paused or
not using the status function.

Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-05-17 15:45:03 -07:00
Linus Walleij 8d318a50b3 DMAENGINE: Support for ST-Ericssons DMA40 block v3
This is a straightforward driver for the ST-Ericsson DMA40 DMA
controller found in U8500, implemented akin to the existing
COH 901 318 driver.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Srinidh Kasagar <srinidhi.kasagar@stericsson.com>
Cc: STEricsson_nomadik_linux@list.st.com
Cc: Alessandro Rubini <rubini@unipv.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-04-14 14:49:20 -07:00