Normally task_numa_work scans over a fairly small amount of memory,
but it is possible to run into a large unpopulated part of virtual
memory, with no pages mapped. In that case, task_numa_work can run
for a while, and it may make sense to reschedule as required.
Cc: akpm@linux-foundation.org
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Reported-by: Xing Gang <gang.xing@hp.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1392761566-24834-2-git-send-email-riel@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Fix this lockdep warning:
[ 44.804600] =========================================================
[ 44.805746] [ INFO: possible irq lock inversion dependency detected ]
[ 44.805746] 3.14.0-rc2-test+ #14 Not tainted
[ 44.805746] ---------------------------------------------------------
[ 44.805746] bash/3674 just changed the state of lock:
[ 44.805746] (&dl_b->lock){+.....}, at: [<ffffffff8106ad15>] sched_rt_handler+0x132/0x248
[ 44.805746] but this lock was taken by another, HARDIRQ-safe lock in the past:
[ 44.805746] (&rq->lock){-.-.-.}
and interrupts could create inverse lock ordering between them.
[ 44.805746]
[ 44.805746] other info that might help us debug this:
[ 44.805746] Possible interrupt unsafe locking scenario:
[ 44.805746]
[ 44.805746] CPU0 CPU1
[ 44.805746] ---- ----
[ 44.805746] lock(&dl_b->lock);
[ 44.805746] local_irq_disable();
[ 44.805746] lock(&rq->lock);
[ 44.805746] lock(&dl_b->lock);
[ 44.805746] <Interrupt>
[ 44.805746] lock(&rq->lock);
by making dl_b->lock acquiring always IRQ safe.
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1392107067-19907-3-git-send-email-juri.lelli@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Don't compare sysctl_sched_rt_runtime against sysctl_sched_rt_period if
the former is equal to RUNTIME_INF, otherwise disabling -rt bandwidth
management (with CONFIG_RT_GROUP_SCHED=n) fails.
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1392107067-19907-2-git-send-email-juri.lelli@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
While debugging the crash with the bad nr_running accounting, I hit
another bug where, after running my sched deadline test, I was getting
failures to take a CPU offline. It was giving me a -EBUSY error.
Adding a bunch of trace_printk()s around, I found that the cpu
notifier that called sched_cpu_inactive() was returning a failure. The
overflow value was coming up negative?
Talking this over with Juri, the problem is that the total_bw update was
suppose to be made by dl_overflow() which, during my tests, seemed to
not be called. Adding more trace_printk()s, it wasn't that it wasn't
called, but it exited out right away with the check of new_bw being
equal to p->dl.dl_bw. The new_bw calculates the ratio between period and
runtime. The bug is that if you set a deadline, you do not need to set
a period if you plan on the period being equal to the deadline. That
is, if period is zero and deadline is not, then the system call should
set the period to be equal to the deadline. This is done elsewhere in
the code.
The fix is easy, check if period is set, and if it is not, then use the
deadline.
Cc: Juri Lelli <juri.lelli@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140219135335.7e74abd4@gandalf.local.home
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Rostedt writes:
My test suite was locking up hard when enabling mmiotracer. This was due
to the mmiotracer placing all but one CPU offline. I found this out
when I was able to reproduce the bug with just my stress-cpu-hotplug
test. This bug baffled me because it would not always trigger, and
would only trigger on the first run after boot up. The
stress-cpu-hotplug test would crash hard the first run, or never crash
at all. But a new reboot may cause it to crash on the first run again.
I spent all week bisecting this, as I couldn't find a consistent
reproducer. I finally narrowed it down to the sched deadline patches,
and even more peculiar, to the commit that added the sched
deadline boot up self test to the latency tracer. Then it dawned on me
to what the bug was.
All it took was to run a task under sched deadline to screw up the CPU
hot plugging. This explained why it would lock up only on the first run
of the stress-cpu-hotplug test. The bug happened when the boot up self
test of the schedule latency tracer would test a deadline task. The
deadline task would corrupt something that would cause CPU hotplug to
fail. If it didn't corrupt it, the stress test would always work
(there's no other sched deadline tasks that would run to cause
problems). If it did corrupt on boot up, the first test would lockup
hard.
I proved this theory by running my deadline test program on another box,
and then run the stress-cpu-hotplug test, and it would now consistently
lock up. I could run stress-cpu-hotplug over and over with no problem,
but once I ran the deadline test, the next run of the
stress-cpu-hotplug would lock hard.
After adding lots of tracing to the code, I found the cause. The
function tracer showed that migrate_tasks() was stuck in an infinite
loop, where rq->nr_running never equaled 1 to break out of it. When I
added a trace_printk() to see what that number was, it was 335 and
never decrementing!
Looking at the deadline code I found:
static void __dequeue_task_dl(struct rq *rq, struct task_struct *p, int flags) {
dequeue_dl_entity(&p->dl);
dequeue_pushable_dl_task(rq, p);
}
static void dequeue_task_dl(struct rq *rq, struct task_struct *p, int flags) {
update_curr_dl(rq);
__dequeue_task_dl(rq, p, flags);
dec_nr_running(rq);
}
And this:
if (dl_runtime_exceeded(rq, dl_se)) {
__dequeue_task_dl(rq, curr, 0);
if (likely(start_dl_timer(dl_se, curr->dl.dl_boosted)))
dl_se->dl_throttled = 1;
else
enqueue_task_dl(rq, curr, ENQUEUE_REPLENISH);
if (!is_leftmost(curr, &rq->dl))
resched_task(curr);
}
Notice how we call __dequeue_task_dl() and in the else case we
call enqueue_task_dl()? Also notice that dequeue_task_dl() has
underscores where enqueue_task_dl() does not. The enqueue_task_dl()
calls inc_nr_running(rq), but __dequeue_task_dl() does not. This is
where we get nr_running out of sync.
[snip]
Another point where nr_running can get out of sync is when the dl_timer
fires:
dl_se->dl_throttled = 0;
if (p->on_rq) {
enqueue_task_dl(rq, p, ENQUEUE_REPLENISH);
if (task_has_dl_policy(rq->curr))
check_preempt_curr_dl(rq, p, 0);
else
resched_task(rq->curr);
This patch does two things:
- correctly accounts for throttled tasks (that are now considered
!running);
- fixes the bug, updating nr_running from {inc,dec}_dl_tasks(),
since we risk to update it twice in some situations (e.g., a
task is dequeued while it has exceeded its budget).
Cc: mingo@redhat.com
Cc: torvalds@linux-foundation.org
Cc: akpm@linux-foundation.org
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1392884379-13744-1-git-send-email-juri.lelli@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Most WDT driver modules return ENODEV during modprobe if
no valid device was found, but w83697hf_wdt returns EIO.
Let w83697hf_wdt return ENODEV.
Signed-off-by: Stanislav Kholmanskikh <stanislav.kholmanskikh@oracle.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Pull sparc fixes from David Miller:
"Three minor fixes from David Howells and Paul Gortmaker"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
Sparc: sparc_cpu_model isn't in asm/system.h any more [ver #2]
sparc32: make copy_to/from_user_page() usable from modular code
sparc32: fix build failure for arch_jump_label_transform
- Fix for a recent probing regression in the nouveau driver introduced
by an ACPI change related to the handling of _DSM from Jiang Liu.
- Fix for a dock station sysfs attribute that stopped working correctly
after recent changes in the ACPI core.
- cpufreq fix taking care of broken code related to CPU removal and
overlooked by a previous recent fix in that area. From Viresh Kumar.
- Two intel_pstate fixes related to Baytrail support added during
the 3.13 cycle (candidates for -stable) from Dirk Brandewie.
- ACPI video fix removing duplicate brightness values from the _BCL
table which makes its user space interface behave sanely. From
Hans de Goede.
- Fix for the powernow-k8 cpufreq driver making it initialize its
per-CPU data structures correctly from Srivatsa S. Bhat.
- Fix for an obscure memory leak in the ACPI PCI interrupt allocation
code (related to ISA) from Tomasz Nowicki.
- ACPI video blacklist changes moving several systems that should
use the native backlight interface instead of the ACPI one from
the general ACPI _OSI blacklist the the ACPI video driver's
blacklist where they belong. This consists of an ACPI video
driver update from Aaron Lu and a revert of a previous commit
adding systems to the ACPI _OSI blacklist requested by Takashi Iwai.
- Several fixes for build issues in ACPI drivers occuring when
CONFIG_PM_SLEEP is unset from Shuah Khan.
- Fix for an sscanf() format string in the ACPI Smart Battery
Subsystem (SBS) driver from Luis G.F.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=5gW2
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management fixes from Rafael Wysocki:
"These include two fixes for recent regressions related to ACPI, a
cpufreq fix for breakage overlooked by a previous fix commit, two
intel_pstate fixes for stuff added during the 3.13 cycle that need to
go into -stable, three fixes for older bugs that also are -stable
candidates, ACPI video blacklist changes related to BIOSes that behave
in a special way on Windows 8, several build fixes for CONFIG_PM_SLEEP
unset in ACPI drivers and an ACPI driver cleanup.
Specifics:
- Fix for a recent probing regression in the nouveau driver
introduced by an ACPI change related to the handling of _DSM from
Jiang Liu.
- Fix for a dock station sysfs attribute that stopped working
correctly after recent changes in the ACPI core.
- cpufreq fix taking care of broken code related to CPU removal and
overlooked by a previous recent fix in that area. From Viresh
Kumar.
- Two intel_pstate fixes related to Baytrail support added during the
3.13 cycle (candidates for -stable) from Dirk Brandewie.
- ACPI video fix removing duplicate brightness values from the _BCL
table which makes its user space interface behave sanely. From
Hans de Goede.
- Fix for the powernow-k8 cpufreq driver making it initialize its
per-CPU data structures correctly from Srivatsa S Bhat.
- Fix for an obscure memory leak in the ACPI PCI interrupt allocation
code (related to ISA) from Tomasz Nowicki.
- ACPI video blacklist changes moving several systems that should use
the native backlight interface instead of the ACPI one from the
general ACPI _OSI blacklist the the ACPI video driver's blacklist
where they belong. This consists of an ACPI video driver update
from Aaron Lu and a revert of a previous commit adding systems to
the ACPI _OSI blacklist requested by Takashi Iwai.
- Several fixes for build issues in ACPI drivers occuring when
CONFIG_PM_SLEEP is unset from Shuah Khan.
- Fix for an sscanf() format string in the ACPI Smart Battery
Subsystem (SBS) driver from Luis G.F"
* tag 'pm+acpi-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
intel_pstate: Add support for Baytrail turbo P states
intel_pstate: Use LFM bus ratio as min ratio/P state
ACPI / nouveau: fix probing regression related to _DSM
Revert "ACPI: Blacklist Win8 OSI for some HP laptop 2013 models"
ACPI / video: Add systems that should favour native backlight interface
ACPI / video: Filter the _BCL table for duplicate brightness values
cpufreq: powernow-k8: Initialize per-cpu data-structures properly
cpufreq: remove sysfs link when a cpu != policy->cpu, is removed
ACPI / PCI: Fix memory leak in acpi_pci_irq_enable()
ACPI / dock: Make 'docked' sysfs attribute work as documented
ACPI / SBS: Fix incorrect sscanf() string
ACPI / thermal: fix thermal driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / SBS: fix SBS driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / fan: fix fan driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / button: fix button driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / battery: fix battery driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / AC: fix AC driver compile error when CONFIG_PM_SLEEP is undefined
The fixes are only for the ARM-SMMU driver. Here is the summary from
Will Deacon:
- Andreas Herrmann took the driver for a run with a real SATA
controller, which caused the new mutex-based locking to explode
since we require mappings in atomic context
- Yifan fixed an issue with the page table creation, which then caused
breakages with the way in which we flush descriptors out to the
table walker
- I ran the driver on a system where the SMMU is hooked into a
coherent interconnect for table walks, and noticed a shareability
mismatch between the CPU and the SMMU
These issues are all fixed here and have been tested on both arm and
arm64 based systems.
Besides that I put a fix on-top to make the spinlock irq-safe, so that the
code-paths can be used in the DMA-API.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=K+3P
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
"The fixes are only for the ARM-SMMU driver. Here is the summary from
Will Deacon:
- Andreas Herrmann took the driver for a run with a real SATA
controller, which caused the new mutex-based locking to explode
since we require mappings in atomic context
- Yifan fixed an issue with the page table creation, which then
caused breakages with the way in which we flush descriptors out to
the table walker
- I ran the driver on a system where the SMMU is hooked into a
coherent interconnect for table walks, and noticed a shareability
mismatch between the CPU and the SMMU
These issues are all fixed here and have been tested on both arm and
arm64 based systems.
Besides that I put a fix on-top to make the spinlock irq-safe, so that
the code-paths can be used in the DMA-API"
* tag 'iommu-fixes-v3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
arm/smmu: Use irqsafe spinlock for domain lock
iommu/arm-smmu: fix compilation issue when !CONFIG_ARM_AMBA
iommu/arm-smmu: set CBARn.BPSHCFG to NSH for s1-s2-bypass contexts
iommu/arm-smmu: fix table flushing during initial allocations
iommu/arm-smmu: really fix page table locking
iommu/arm-smmu: fix pud/pmd entry fill sequence
This time we got a slightly higher volume than previous times,
but all device-specific good fixes. Noticeable changes are fixes in
davinci, and the removal of open-codes in HD-audio ca0132 driver.
The rest are all small fixes and/or quirks.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=96St
-----END PGP SIGNATURE-----
Merge tag 'sound-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This time we got a slightly higher volume than previous times, but all
device-specific good fixes. Noticeable changes are fixes in davinci,
and the removal of open-codes in HD-audio ca0132 driver. The rest are
all small fixes and/or quirks"
* tag 'sound-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Enable front audio jacks on one HP desktop model
ALSA: hda/ca0132 - Fix recording from mode id 0x8
ALSA: hda/ca0132 - setup/cleanup streams
ALSA: hda - add headset mic detect quirks for two Dell laptops
ALSA: usb-audio: work around KEF X300A firmware bug
ASoC: max98090: make REVISION_ID readable
ASoC: txx9aclc_ac97: Fix kernel crash on probe
ASoC: max98090: sync regcache on entering STANDBY
ASoC: blackfin: Fix machine driver Kconfig dependencies
ASoC: da9055: Fix device registration of PMIC and CODEC devices
ASoC: fsl-esai: fix ESAI TDM slot setting
ASoC: fsl: fix pm support of machine drivers
ASoC: rt5640: Add ACPI ID for Intel Baytrail
ASoC: davinci-evm: Add pm callbacks to platform driver
ASoC: davinci-mcasp: Consolidate pm_runtime_get/put() use in the driver
ASoC: davinci-mcasp: Configure xxTDM, xxFMT and xxFMCT registers synchronously
ASoC: davinci-mcasp: Harmonize the sub hw_params function names
ASoC: samsung: Fix trivial typo
ASoC: samsung: Remove invalid dependencies
ASoC: wm8993: drop regulator_bulk_free of devm_ allocated data
* pm-cpufreq:
intel_pstate: Add support for Baytrail turbo P states
intel_pstate: Use LFM bus ratio as min ratio/P state
cpufreq: powernow-k8: Initialize per-cpu data-structures properly
cpufreq: remove sysfs link when a cpu != policy->cpu, is removed
* acpi-pm:
ACPI / thermal: fix thermal driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / SBS: fix SBS driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / fan: fix fan driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / button: fix button driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / battery: fix battery driver compile error when CONFIG_PM_SLEEP is undefined
ACPI / AC: fix AC driver compile error when CONFIG_PM_SLEEP is undefined
* acpi-video:
Revert "ACPI: Blacklist Win8 OSI for some HP laptop 2013 models"
ACPI / video: Add systems that should favour native backlight interface
ACPI / video: Filter the _BCL table for duplicate brightness values
A documentation update exposed the existance of the turbo ratio
register. Update baytrail support to use the turbo range.
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Cc: 3.13+ <stable@vger.kernel.org> # 3.13+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
LFM (max efficiency ratio) is the max frequency at minimum voltage
supported by the processor. Using LFM as the minimum P state
increases performmance without affecting power. By not using P states
below LFM we avoid using P states that are less power efficient.
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Cc: 3.13+ <stable@vger.kernel.org> # 3.13+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Change "dummy supplies not allowed" error message to warning instead, as this
is a just warning message with no change to the behavior.
[Added a CC to stable since some other bug fixes cause this to come up
more frequently on PCs which is how it was noticed -- broonie]
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
Here are 10 fixes for our current -rc cycle. It's likely
the last round of fixes for this merge window. All patches
have soaked for a long time and have all been tested in real
HW.
The most interesting fixes are a fix for enumeration of superspeed
hubs when MUSB is acting as host, and a remote-wakeup fix also on
MUSB.
Signed-of-by: Felipe Balbi <balbi@ti.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=AnZJ
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-v3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
Felipe writes:
usb: fixes for v3.14-rc4
Here are 10 fixes for our current -rc cycle. It's likely
the last round of fixes for this merge window. All patches
have soaked for a long time and have all been tested in real
HW.
The most interesting fixes are a fix for enumeration of superspeed
hubs when MUSB is acting as host, and a remote-wakeup fix also on
MUSB.
Signed-of-by: Felipe Balbi <balbi@ti.com>
MSI
- Fix AHCI single-MSI fallback (Alexander Gordeev)
- Fix populate_msi_sysfs() error paths (Greg Kroah-Hartman)
- Fix htmldocs problem (Masanari Iida)
- Add pci_enable_msi_exact() and pci_enable_msix_exact() (Alexander Gordeev)
- Update documentation (Alexander Gordeev)
Miscellaneous
- mvebu: expose device ID & revision via lspci (Andrew Lunn)
- Enable INTx if the BIOS left them disabled (Bjorn Helgaas)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=CTv7
-----END PGP SIGNATURE-----
Merge tag 'pci-v3.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"The most interesting thing here is the change to enable INTx (by
clearing PCI_COMMAND_INTX_DISABLE) if the BIOS left INTx disabled.
Apparently the Baytrail BIOS does this, which means EHCI doesn't work.
Also, fix an AHCI MSI regression and other issues with the recent MSI
changes. This also adds pci_enable_msi_exact() and
pci_enable_msix_exact(), which aren't regression fixes, but will keep
us from touching drivers twice (once to stop using the deprecated
pci_enable_msi(), etc., and again to use the *_exact() variants).
There's also a minor MVEBU fix.
Summary:
MSI:
- Fix AHCI single-MSI fallback (Alexander Gordeev)
- Fix populate_msi_sysfs() error paths (Greg Kroah-Hartman)
- Fix htmldocs problem (Masanari Iida)
- Add pci_enable_msi_exact() and pci_enable_msix_exact() (Alexander Gordeev)
- Update documentation (Alexander Gordeev)
Miscellaneous:
- mvebu: expose device ID & revision via lspci (Andrew Lunn)
- Enable INTx if the BIOS left them disabled (Bjorn Helgaas)"
* tag 'pci-v3.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
ahci: Fix broken fallback to single MSI mode
PCI: Enable INTx if BIOS left them disabled
PCI/MSI: Add pci_enable_msi_exact() and pci_enable_msix_exact()
PCI/MSI: Fix cut-and-paste errors in documentation
PCI/MSI: Add pci_enable_msi() documentation back
PCI/MSI: Fix pci_msix_vec_count() htmldocs failure
PCI/MSI: Fix leak of msi_attrs
PCI/MSI: Check kmalloc() return value, fix leak of name
PCI: mvebu: Use Device ID and revision from underlying endpoint
Fix regression caused by commit b072e53, which breaks loading nouveau
driver on optimus laptops.
On some platforms, ACPI _DSM method (nouveau_op_dsm_muid, function 0)
has special requirements on the fourth parameter, which is different
from ACPI specifications. So revert to the private implementation
to check availability of _DSM functions instead of using common
acpi_check_dsm() interface.
Fixes: b072e53b0a (ACPI / nouveau: replace open-coded _DSM code with helper functions)
Reported-and-tested-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
[rjw: Subject]
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull libata fixes from Tejun Heo:
"Various device specific fixes. Nothing too interesting"
* 'for-3.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
ahci: disable NCQ on Samsung pci-e SSDs on macbooks
ata: sata_mv: Cleanup only the initialized ports
sata_sil: apply MOD15WRITE quirk to TOSHIBA MK2561GSYN
ata: enable quirk from jmicron JMB350 for JMB394
ATA: SATA_MV: Add missing Kconfig select statememnt
ata: pata_imx: Check the return value from clk_prepare_enable()
Pull cgroup fixes from Tejun Heo:
"Quite a few fixes this time.
Three locking fixes, all marked for -stable. A couple error path
fixes and some misc fixes. Hugh found a bug in memcg offlining
sequence and we thought we could fix that from cgroup core side but
that turned out to be insufficient and got reverted. A different fix
has been applied to -mm"
* 'for-3.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: update cgroup_enable_task_cg_lists() to grab siglock
Revert "cgroup: use an ordered workqueue for cgroup destruction"
cgroup: protect modifications to cgroup_idr with cgroup_mutex
cgroup: fix locking in cgroup_cfts_commit()
cgroup: fix error return from cgroup_create()
cgroup: fix error return value in cgroup_mount()
cgroup: use an ordered workqueue for cgroup destruction
nfs: include xattr.h from fs/nfs/nfs3proc.c
cpuset: update MAINTAINERS entry
arm, pm, vmpressure: add missing slab.h includes
Pull workqueue fixes from Tejun Heo:
"Two workqueue fixes. One for an unlikely but possible critical bug
during kworker shutdown and the other to make lockdep names a bit more
descriptive"
* 'for-3.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: ensure @task is valid across kthread_stop()
workqueue: add args to workqueue lockdep name
Pull DMA-mapping fixes from Marek Szyprowski:
"This contains fixes for incorrect atomic test in dma-mapping subsystem
for ARM and x86 architecture"
* 'fixes-for-v3.14' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
x86: dma-mapping: fix GFP_ATOMIC macro usage
ARM: dma-mapping: fix GFP_ATOMIC macro usage
sparc_cpu_model isn't in asm/system.h any more, so remove a comment
about it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: sparclinux@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
schedule_delayed_work() takes the delay in jiffies, not msecs.
This bug slipped in with the recent reset logic cleanup
(8ed1fb790ea: "usb: musb: finish suspend/reset work independently from
musb_hub_control()").
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Both the PM_RUNTIME and PM_SLEEP callbacks call into the common
msm_otg_{suspend,resume} routines, however these routines are only being
built when CONFIG_PM_SLEEP. In addition, msm_otg_{suspend,resume} also
depends on msm_hsusb_config_vddcx(), which is only built when
CONFIG_PM_SLEEP.
Fix the CONFIG_PM_RUNTIME, !CONFIG_PM_SLEEP case by changing the
preprocessor conditional, and moving msm_hsusb_config_vddcx().
While we're here, eliminate the CONFIG_PM conditional for setting
up the dev_pm_ops.
This address the following errors Russell King has hit doing randconfig
builds:
drivers/usb/phy/phy-msm-usb.c: In function 'msm_otg_runtime_suspend':
drivers/usb/phy/phy-msm-usb.c:1691:2: error: implicit declaration of function 'msm_otg_suspend'
drivers/usb/phy/phy-msm-usb.c: In function 'msm_otg_runtime_resume':
drivers/usb/phy/phy-msm-usb.c:1699:2: error: implicit declaration of function 'msm_otg_resume'
Cc: Ivan T. Ivanov <iivanov@mm-sol.com>
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Fix possible NULL pointer dereference introduced in
commit 219580e (usb: f_fs: check quirk to pad epout
buf size when not aligned to maxpacketsize)
In cases we do wait with:
wait_event_interruptible(epfile->wait, (ep = epfile->ep));
for endpoint to be enabled, functionfs_bind() has not been called yet
and epfile->ffs->gadget is still NULL and the automatic variable 'gadget'
has been initialized with NULL at the point of its definition.
Later on it is used as a parameter to:
usb_ep_align_maybe(gadget, ep->ep, len)
which in turn dereferences it.
This patch fixes it by moving the actual assignment to the local 'gadget'
variable after the potential waiting has completed.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
We need to use gadget_is_otg to check if the gadget is really
otg support at runtime, other composite gadget drivers have already
followed this method.
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
As the lock might be used through DMA-API which is allowed
in interrupt context.
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Adds a selftest function for the of_match_node function. of_match_node
is supposed to handle precedence for the compatible property as well as
the name and device_type values. This patch adds some test case data and
a function that makes sure each test node matches against the correct
entry of an of_device_id table.
This code was written to verify the new of_match_node() implementation
that is an earlier part of this series.
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Cc: Kevin Hao <haokexin@gmail.com>
The testcase data is usable by any platform. This patch moves it into
the drivers/of directory so it can be included by any architecture.
Using the test cases requires manually adding #include <testcases.dtsi>
to the end of the boards .dtsi file and enabling CONFIG_OF_SELFTEST. Not
pretty though. A useful project would be to make the testcase code
easier to execute.
Signed-off-by: Grant Likely <grant.likely@linaro.org>
In the current implementation of __of_match_node(), it will compare
each given match entry against all the node's compatible strings
with of_device_is_compatible().
To achieve multiple compatible strings per node with ordering from
specific to generic, this requires given matches to be ordered from
specific to generic. For most of the drivers this is not true and
also an alphabetical ordering is more sane there.
Therefore, we define a following priority order for the match, and
then scan all the entries to find the best match.
1. specific compatible && type && name
2. specific compatible && type
3. specific compatible && name
4. specific compatible
5. general compatible && type && name
6. general compatible && type
7. general compatible && name
8. general compatible
9. type && name
10. type
11. name
v5: Fix nested locking bug
v4: Short-circuit failure cases instead of mucking with score, and
remove extra __of_device_is_compatible() wrapper stub.
Move scoring logic directly into __of_device_is_compatible()
v3: Also need to bail out when there does have a compatible member in match
entry, but it doesn't match with the device node's compatible.
v2: Fix the bug such as we get the same score for the following two match
entries with the empty node 'name2 { };'
struct of_device_id matches[] = {
{.name = "name2", },
{.name = "name2", .type = "type1", },
{}
};
Signed-off-by: Kevin Hao <haokexin@gmail.com>
[grant.likely: added v4 changes]
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Tested-by: Stephen Chivers <schivers@csc.com>
Tested-by: Sachin Kamat <sachin.kamat@linaro.org>
The front headphone and mic jackes on a HP desktop model (Vendor Id:
0x111d76c7 Subsystem Id: 0x103c2b17) can not work, the codec on this
machine has 8 physical ports, 6 of them are routed to rear jackes
and all of them work very well, while the remaining 2 ports are
routed to front headphone and mic jackes, but the corresponding
pin complex node are not defined correctly.
After apply this fix, the front audio jackes can work very well.
[trivial fix of enum definition by tiwai]
BugLink: https://bugs.launchpad.net/bugs/1282369
Cc: David Henningsson <david.henningsson@canonical.com>
Tested-by: Gerald Yang <gerald.yang@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A few fixes, all driver speccific ones. The DaVinci ones aren't as
clear as they should be from the subject lines on the commits but they
fix issues which will prevent correct operation in some use cases and
only affect that particular driver so are reasonably safe.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Kgdb
-----END PGP SIGNATURE-----
Merge tag 'asoc-v3.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v3.14
A few fixes, all driver speccific ones. The DaVinci ones aren't as
clear as they should be from the subject lines on the commits but they
fix issues which will prevent correct operation in some use cases and
only affect that particular driver so are reasonably safe.
While copy_to/from_user_page() users are uncommon, there is one in
drivers/staging/lustre/lustre/libcfs/linux/linux-curproc.c which leads
to the following:
ERROR: "sparc32_cachetlb_ops" [drivers/staging/lustre/lustre/libcfs/libcfs.ko] undefined!
during routine allmodconfig build coverage. The reason this happens
is as follows:
In arch/sparc/include/asm/cacheflush_32.h we have:
#define flush_cache_page(vma,addr,pfn) \
sparc32_cachetlb_ops->cache_page(vma, addr)
#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
do { \
flush_cache_page(vma, vaddr, page_to_pfn(page));\
memcpy(dst, src, len); \
} while (0)
#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
do { \
flush_cache_page(vma, vaddr, page_to_pfn(page));\
memcpy(dst, src, len); \
} while (0)
However, sparc32_cachetlb_ops isn't exported and hence the error.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In arch/sparc/Kernel/Makefile, we see:
obj-$(CONFIG_SPARC64) += jump_label.o
However, the Kconfig selects HAVE_ARCH_JUMP_LABEL unconditionally
for all SPARC. This in turn leads to the following failure when
doing allmodconfig coverage builds:
kernel/built-in.o: In function `__jump_label_update':
jump_label.c:(.text+0x8560c): undefined reference to `arch_jump_label_transform'
kernel/built-in.o: In function `arch_jump_label_transform_static':
(.text+0x85cf4): undefined reference to `arch_jump_label_transform'
make: *** [vmlinux] Error 1
Change HAVE_ARCH_JUMP_LABEL to be conditional on SPARC64 so that it
matches the Makefile.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 2d4054d842 (ACPI: Blacklist Win8 OSI for some HP
laptop 2013 models) that is not necessary any more after previous
commit 1811fcb029fa (ACPI / video: Add systems that should favour native
backlight interface).
Requested-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some system's ACPI video backlight control interface is broken and the
native backlight control interface should be used by default. This patch
sets the use_native_backlight parameter to true for those systems so
that video backlight control interface will not be created. For detailed
models that are added here, reference the following list.
Note that the user specified kernel cmdline option will always have the
highest priority, i.e. if use_native_backlight=0 is specified and the
system is in the DMI table, the video module will not skip registering
backlight interface for it.
Thinkpad T430s:
Reported-by: Theodore Tso <tytso@mit.edu>
Reported-and-tested-by: Peter Weber <bugs@ttyhoney.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=51231
Thinkpad X230:
Reported-and-tested-by: Igor Gnatenko <i.gnatenko.brain@gmail.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=51231
ThinkPad X1 Carbon:
Reported-and-tested-by: Igor Gnatenko <i.gnatenko.brain@gmail.com>
Lenovo Yoga 13:
Reported-by: Lennart Poettering <lennart@poettering.net>
Reported-and-tested-by: Kevin Smith <thirdwiggin@gmail.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=63811
Dell Inspiron 7520:
Reported-by: Rinat Ibragimov <ibragimovrinat@mail.ru>
Acer Aspire 5733Z:
Reported-by: <sov.info@mail.ru>
References: https://bugzilla.kernel.org/show_bug.cgi?id=62941
Acer Aspire V5-431:
Reported-by: Thomas Christensen <christensenthomas@gmail.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=68751
HP ProBook 4340s:
Reported-and-tested-by: Vladimir Sherenkov <a_12300@mail.ru>
References: http://redmine.russianfedora.pro/issues/1258
HP EliteBook/ProBook 2013 models, ZBook and some others:
Provided-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some devices have duplicate entries in there brightness levels table, ie
on my Dell Latitude E6430 the table looks like this:
[ 3.686060] acpi backlight index 0, val 80
[ 3.686095] acpi backlight index 1, val 50
[ 3.686122] acpi backlight index 2, val 5
[ 3.686147] acpi backlight index 3, val 5
[ 3.686172] acpi backlight index 4, val 5
[ 3.686197] acpi backlight index 5, val 5
[ 3.686223] acpi backlight index 6, val 5
[ 3.686248] acpi backlight index 7, val 5
[ 3.686273] acpi backlight index 8, val 6
[ 3.686332] acpi backlight index 9, val 7
[ 3.686356] acpi backlight index 10, val 8
[ 3.686380] acpi backlight index 11, val 9
etc.
Notice that brightness values 0-5 are all mapped to 5. This means that
if userspace writes any value between 0 and 5 to the brightness sysfs attribute
and then reads it, it will always return 0, which is somewhat unexpected.
This is a problem for ie gnome-settings-daemon, which uses read-modify-write
logic when the users presses the brightness up or down keys. This is done
this way to take brightness changes from other sources into account.
On this specific laptop what happens once the brightness has been set to 0,
is that gsd reads 0, adds 5, writes 5, and on the next brightness up key press
again reads 0, so things get stuck at the lowest brightness setting.
Filtering out the duplicate table entries, makes any write to brightness
read back as the written value as one would expect, fixing this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Aaron Lu <aaron.lu@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Highlights include stable fixes for the following bugs:
- General performance regression due to NFS_INO_INVALID_LABEL being set
when the server doesn't support labeled NFS
- Hang in the RPC code due to a socket out-of-buffer race
- Infinite loop when trying to establish the NFSv4 lease
- Use-after-free bug in the RPCSEC gss code.
- nfs4_select_rw_stateid is returning with a non-zero error value on success
Other bug fixes:
- Potential memory scribble in the RPC bi-directional RPC code
- Pipe version reference leak
- Use the correct net namespace in the new NFSv4 migration code
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tll2
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.14-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include stable fixes for the following bugs:
- General performance regression due to NFS_INO_INVALID_LABEL being
set when the server doesn't support labeled NFS
- Hang in the RPC code due to a socket out-of-buffer race
- Infinite loop when trying to establish the NFSv4 lease
- Use-after-free bug in the RPCSEC gss code.
- nfs4_select_rw_stateid is returning with a non-zero error value on
success
Other bug fixes:
- Potential memory scribble in the RPC bi-directional RPC code
- Pipe version reference leak
- Use the correct net namespace in the new NFSv4 migration code"
* tag 'nfs-for-3.14-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS fix error return in nfs4_select_rw_stateid
NFSv4: Use the correct net namespace in nfs4_update_server
SUNRPC: Fix a pipe_version reference leak
SUNRPC: Ensure that gss_auth isn't freed before its upcall messages
SUNRPC: Fix potential memory scribble in xprt_free_bc_request()
SUNRPC: Fix races in xs_nospace()
SUNRPC: Don't create a gss auth cache unless rpc.gssd is running
NFS: Do not set NFS_INO_INVALID_LABEL unless server supports labeled NFS
Couple of small issues solved:
- Suspend/Resume call-backs require CONFIG_PM_SLEEP
- Some drivers written for 32bit architectures fail when compiled
with a 64bit compiler. The fixes will future proof the drivers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=705r
-----END PGP SIGNATURE-----
Merge tag 'mfd-fixes-3.14-1' of git://git.linaro.org/people/lee.jones/mfd
Pull MFD fixes from Lee Jones:
"Couple of small issues solved:
- Suspend/Resume call-backs require CONFIG_PM_SLEEP
- Some drivers written for 32bit architectures fail when compiled
with a 64bit compiler. The fixes will future proof the drivers"
* tag 'mfd-fixes-3.14-1' of git://git.linaro.org/people/lee.jones/mfd:
mfd: sec-core: sec_pmic_{suspend,resume}() should depend on CONFIG_PM_SLEEP
mfd: max14577: max14577_{suspend,resume}() should depend on CONFIG_PM_SLEEP
mfd: tps65217: Naturalise cross-architecture discrepancies
mfd: wm8994-core: Naturalise cross-architecture discrepancies
mfd: max8998: Naturalise cross-architecture discrepancies
mfd: max8997: Naturalise cross-architecture discrepancies
Intel Baytrail is based on Silvermont core so MSR_FSB_FREQ[2:0] == 0 means
that the CPU reference clock runs at 83.3MHz. Add this missing frequency to
the table.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Bin Gao <bin.gao@linux.intel.com>
Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/r/1392810750-18660-2-git-send-email-mika.westerberg@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If we cannot calibrate TSC via MSR based calibration
try_msr_calibrate_tsc() stores zero to fast_calibrate and returns that
to the caller. This value gets then propagated further to clockevents
code resulting division by zero oops like the one below:
divide error: 0000 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.13.0+ #47
task: ffff880075508000 ti: ffff880075506000 task.ti: ffff880075506000
RIP: 0010:[<ffffffff810aec14>] [<ffffffff810aec14>] clockevents_config.part.3+0x24/0xa0
RSP: 0000:ffff880075507e58 EFLAGS: 00010246
RAX: ffffffffffffffff RBX: ffff880079c0cd80 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffffffffff
RBP: ffff880075507e70 R08: 0000000000000001 R09: 00000000000000be
R10: 00000000000000bd R11: 0000000000000003 R12: 000000000000b008
R13: 0000000000000008 R14: 000000000000b010 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff880079c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffff880079fff000 CR3: 0000000001c0b000 CR4: 00000000001006f0
Stack:
ffff880079c0cd80 000000000000b008 0000000000000008 ffff880075507e88
ffffffff810aecb0 ffff880079c0cd80 ffff880075507e98 ffffffff81030168
ffff880075507ed8 ffffffff81d1104f 00000000000000c3 0000000000000000
Call Trace:
[<ffffffff810aecb0>] clockevents_config_and_register+0x20/0x30
[<ffffffff81030168>] setup_APIC_timer+0xc8/0xd0
[<ffffffff81d1104f>] setup_boot_APIC_clock+0x4cc/0x4d8
[<ffffffff81d0f5de>] native_smp_prepare_cpus+0x3dd/0x3f0
[<ffffffff81d02ee9>] kernel_init_freeable+0xc3/0x205
[<ffffffff8177c910>] ? rest_init+0x90/0x90
[<ffffffff8177c91e>] kernel_init+0xe/0x120
[<ffffffff8178deec>] ret_from_fork+0x7c/0xb0
[<ffffffff8177c910>] ? rest_init+0x90/0x90
Prevent this from happening by:
1) Modifying try_msr_calibrate_tsc() to return calibration value or zero
if it fails.
2) Check this return value in native_calibrate_tsc() and in case of zero
fallback to use normal non-MSR based calibration.
[mw: Added subject and changelog]
Reported-and-tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bin Gao <bin.gao@linux.intel.com>
Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/r/1392810750-18660-1-git-send-email-mika.westerberg@linux.intel.com
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The generic sched_clock registration function was previously
done lockless, due to the fact that it was expected to be called
only once. However, now there are systems that may register
multiple sched_clock sources, for which the lack of locking has
casued problems:
If two sched_clock sources are registered we may end up in a
situation where a call to sched_clock() may be accessing the
epoch cycle count for the old counter and the cycle count for the
new counter. This can lead to confusing results where
sched_clock() values jump and then are reset to 0 (due to the way
the registration function forces the epoch_ns to be 0).
Fix this by reorganizing the registration function to hold the
seqlock for as short a time as possible while we update the
clock_data structure for a new counter. We also put any
accumulated time into epoch_ns instead of resetting the time to
0 so that the clock doesn't reset after each successful
registration.
[jstultz: Added extra context to the commit message]
Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Cartwright <joshc@codeaurora.org>
Link: http://lkml.kernel.org/r/1392662736-7803-2-git-send-email-john.stultz@linaro.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If CONFIG_PM_SLEEP=n:
drivers/mfd/sec-core.c:349: warning: ‘sec_pmic_suspend’ defined but not used
drivers/mfd/sec-core.c:371: warning: ‘sec_pmic_resume’ defined but not used
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
If CONFIG_PM_SLEEP=n:
drivers/mfd/max14577.c:177: warning: ‘max14577_suspend’ defined but not used
drivers/mfd/max14577.c:200: warning: ‘max14577_resume’ defined but not used
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
If we compile the TPS65217 for a 64bit architecture we receive the following
warnings:
drivers/mfd/tps65217.c: In function ‘tps65217_probe’:
drivers/mfd/tps65217.c:173:13:
warning: cast from pointer to integer of different size
chip_id = (unsigned int)match->data;
^
Signed-off-by: Lee Jones <lee.jones@linaro.org>
If we compile the WM8994 for a 64bit architecture we receive the following
warnings:
drivers/mfd/wm8994-core.c: In function ‘wm8994_i2c_probe’:
drivers/mfd/wm8994-core.c:639:19:
warning: cast from pointer to integer of different size
wm8994->type = (int)of_id->data;
^
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Rik van Riel
Juri Lelli
Steven Rostedt
Stanislav Kholmanskikh
Linus Torvalds
Rafael J. Wysocki
Dirk Brandewie
Shuah Khan
Greg Kroah-Hartman
Jiang Liu
Brian Campbell
David Howells
Daniel Mack
Josh Cartwright
Andrzej Pietrasiewicz
Peter Chen
Joerg Roedel
Grant Likely
Kevin Hao
Hui Wang
Takashi Iwai
Paul Gortmaker
Aaron Lu
Hans de Goede
Mika Westerberg
Thomas Gleixner
Stephen Boyd
Andy Adamson
Geert Uytterhoeven
Lee Jones