Граф коммитов

3321 Коммитов

Автор SHA1 Сообщение Дата
Tang Yuantian 1ce788d242 ahci: qoriq: Revert "ahci: qoriq: Disable NCQ on ls2080a SoC"
This reverts commit 640847298e ("ahci: qoriq: Disable NCQ
on ls2080a SoC")

The erratum has been fixed in ls2080a v2.0 and later soc.
In reality, customer will not get any ls2080a v1.0 soc. Neither apply
to any products. So reverting this commit won't create any side effect.

Blacklisting v2.0 could also be a option, but that needs to check the
soc version which is not suitable in the driver.

Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-09-30 10:28:51 +02:00
Harman Kalra 70a19b7e40 pata_at91: Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Signed-off-by: Harman Kalra <harman4linux@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-09-22 11:48:46 -04:00
Harman Kalra 02d9d3cbac ata: Replace BUG() with BUG_ON().
Replace BUG() with BUG_ON().
Caught by coccinelle.

Signed-off-by: Harman Kalra <harman4linux@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-09-22 11:46:52 -04:00
Harman Kalra 6ec76070f1 ata: sata_mv: Replacing dma_pool_alloc and memset with a single call dma_pool_zalloc.
Replacing dma_pool_alloc and memset with a single call to dma_pool_zalloc

Signed-off-by: Harman Kalra <harman4linux@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-09-20 16:07:16 -04:00
Shaun Tancheff 0ce1b18c42 libata: Some drives failing on SCT Write Same
Restrict support SCT Write Same to devices which also support ZAC where
support is required.

Reported-by: Mike Krinkin <krinkin.m.u@gmail.com>
Signed-off-by: Shaun Tancheff <shaun.tancheff@seagate.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-09-09 15:21:21 -04:00
Christoph Hellwig 0b9e2988ab ahci: use pci_alloc_irq_vectors
Use the new pci_alloc_irq_vectors API to allocate MSI-X and MSI vectors.
The big advantage over the old code is that we can use the same API for
MSI and MSI-X, and that we don't need to store the MSI-X vector mapping
in driver-private data structures.

This first conversion keeps the probe order as-is: MSI-X multi vector,
MSI multi vector, MSI single vector, MSI-X single vector and last a
single least legacy interrupt line.  There is one small change of
behavior: we now check the "MSI Revert to Single Message" flag for
MSI-X in addition to MSI.

Because the API to find the Linux IRQ number for a MSI/MSI-X vector
is PCI specific, but libahaci is bus-agnostic I had to a
get_irq_vector function pointer to struct ahci_host_priv.  The
alternative would be to move the multi-vector case of ahci_host_activate
to ahci.c and just call ata_host_activate directly from the others
users of ahci_host_activate.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-09-06 12:38:17 -04:00
Tejun Heo 2536524a91 Merge branch 'master' into for-4.9 2016-09-06 12:35:56 -04:00
Alan Cox 9ebae9e4bc pata_ninja32: Avoid corrupting status flags
Ninja32 needs to set some flags to indicate it does 32bit IO. However it currently assigns this which
loses the initializing flag and causes a warning spew. Fix it to use a logical or as is intended.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Tested-by: Ellmar Stelnberger <estellnb@elstel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-08-30 11:59:47 -04:00
Shaun Tancheff 7d36dd00ab libata: SCT Write Same handle ATA_DFLAG_PIO
Use non DMA write log when ATA_DFLAG_PIO is set.

Signed-off-by: Shaun Tancheff <shaun.tancheff@seagate.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
2016-08-25 11:26:48 -04:00
Shaun Tancheff ef2d7392c4 libata: SCT Write Same / DSM Trim
Correct handling of devices with sector_size other that 512 bytes.

In the case of a 4Kn device sector_size it is possible to describe a much
larger DSM Trim than the current fixed default of 512 bytes.

This patch assumes the minimum descriptor is sector_size and fills out
the descriptor accordingly.

The ACS-2 specification is quite clear that the DSM command payload is
sized as number of 512 byte transfers so a 4Kn device will operate
correctly without this patch.

Signed-off-by: Shaun Tancheff <shaun.tancheff@seagate.com>
Acked-by: Tejun Heo <tj@kernel.org>
2016-08-25 11:26:48 -04:00
Shaun Tancheff 7b20309428 libata: Add support for SCT Write Same
SATA drives may support write same via SCT. This is useful
for setting the drive contents to a specific pattern (0's).

Translate a SCSI WRITE SAME 16 command to be either a DSM TRIM
command or an SCT Write Same command.

Based on the UNMAP flag:
  - When set translate to DSM TRIM
  - When not set translate to SCT Write Same

Signed-off-by: Shaun Tancheff <shaun.tancheff@seagate.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
2016-08-25 11:26:48 -04:00
Shaun Tancheff 9379e6b8e0 libata: Safely overwrite attached page in WRITE SAME xlat
Safely overwriting the attached page to ATA format from the SCSI formatted
variant.

Signed-off-by: Shaun Tancheff <shaun.tancheff@seagate.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
2016-08-25 11:26:48 -04:00
Christoph Hellwig 9b4b3f6a06 ahci: disable correct irq for dummy ports
irq already contains the interrupt number for the port, don't add the
port index to it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: d684a90d38 ("ahci: per-port msix support")
Cc: stable@vger.kernel.org v4.5+
2016-08-11 13:45:31 -04:00
Christoph Hellwig cd27396e61 ahci: also use a per-port lock for the multi-MSIX case
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-08-11 12:37:31 -04:00
Patrice Chotard e7190699ca ahci: st: Add ports-implemented property in support
Despite ST AHCI version = 1.3, reading HOST_PORTS_IMPL
returns 0. So force_port_map to 1 by using ports-implemented
DT property.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-08-10 12:16:49 -04:00
Tang Yuantian 16af080e47 ahci: qoriq: enable snoopable sata read and write
By default the SATA IP on the qoriq SoCs does not generating
coherent/snoopable transactions.  This patch enable it in the
sata axicc register.
In addition, the dma-coherent property must be set on the
SATA controller nodes.

Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-08-10 00:03:33 -04:00
Tang Yuantian 107a077d19 ahci: qoriq: adjust sata parameter
The default values for Port Phy2Cfg register and
Port Phy3Cfg register are better, no need to overwrite them.

Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-08-10 00:03:30 -04:00
Tom Yan 535fd07220 libata-scsi: fix MODE SELECT translation for Control mode page
scsi_done() was called repeatedly and apparently because of that,
the kernel would call trace when we touch the Control mode page:

Call Trace:
 [<ffffffff812ea0d2>] dump_stack+0x63/0x81
 [<ffffffff81079cfb>] __warn+0xcb/0xf0
 [<ffffffff81079e2d>] warn_slowpath_null+0x1d/0x20
 [<ffffffffa00f51b0>] ata_eh_finish+0xe0/0xf0 [libata]
 [<ffffffffa00fb830>] sata_pmp_error_handler+0x640/0xa50 [libata]
 [<ffffffffa00470ed>] ahci_error_handler+0x1d/0x70 [libahci]
 [<ffffffffa00f55f0>] ata_scsi_port_error_handler+0x430/0x770 [libata]
 [<ffffffffa00eff8d>] ? ata_scsi_cmd_error_handler+0xdd/0x160 [libata]
 [<ffffffffa00f59d7>] ata_scsi_error+0xa7/0xf0 [libata]
 [<ffffffffa00913ba>] scsi_error_handler+0xaa/0x560 [scsi_mod]
 [<ffffffffa0091310>] ? scsi_eh_get_sense+0x180/0x180 [scsi_mod]
 [<ffffffff81098eb8>] kthread+0xd8/0xf0
 [<ffffffff815d913f>] ret_from_fork+0x1f/0x40
 [<ffffffff81098de0>] ? kthread_worker_fn+0x170/0x170
---[ end trace 8b7501047e928a17 ]---

Removed the unnecessary code and let ata_scsi_translate() do the job.

Also, since ata_mselect_control() has no ATA command to send to the
device, ata_scsi_mode_select_xlat() should return 1 for it, so that
ata_scsi_translate() will finish early to avoid ata_qc_issue().

Signed-off-by: Tom Yan <tom.ty89@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-08-09 23:38:14 -04:00
Tom Yan d7372cb629 libata-scsi: use u8 array to store mode page copy
ata_mselect_*() would initialize a char array for storing a copy of
the current mode page. However, char could be signed char. In that
case, bytes larger than 127 would be converted to negative number.

For example, 0xff from def_control_mpage[] would become -1. This
prevented ata_mselect_control() from working at all, since when it
did the read-only bits check, there would always be a mismatch.

Signed-off-by: Tom Yan <tom.ty89@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-08-09 16:13:04 -04:00
Linus Torvalds 607e11ab66 New LED class driver:
- LED driver for TI LP3952 6-Channel Color LED
 
 LED core improvements:
 - Only descend into leds directory when CONFIG_NEW_LEDS is set
 - Add no-op gpio_led_register_device when LED subsystem is disabled
 - MAINTAINERS: Add file patterns for led device tree bindings
 
 LED Trigger core improvements:
 - return error if invalid trigger name is provided via sysfs
 
 LED class drivers improvements
 - is31fl32xx: define complete i2c_device_id table
 - is31fl32xx: fix typo in id and match table names
 - leds-gpio: Set of_node for created LED devices
 - pca9532: Add device tree support
 
 Conversion of IDE trigger to common disk trigger:
 - leds: convert IDE trigger to common disk trigger
 - leds: documentation: 'ide-disk' to 'disk-activity'
 - unicore32: use the new LED disk activity trigger
 - parisc: use the new LED disk activity trigger
 - mips: use the new LED disk activity trigger
 - arm: use the new LED disk activity trigger
 - powerpc: use the new LED disk activity trigger
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.17 (GNU/Linux)
 
 iQIcBAABAgAGBQJXlbvcAAoJEL1qUBy3i3wm1NoP/1ujmu9eljBO/0VyyrZNSWvM
 F367twUAmfyrC+xos/lyxn8u8yknyLNfbUStU0L/cpz2GQRNwuIS4h+xrkyqsDCj
 JBCKrZQCqi/Hsj6jBuIUW+s0OFjxhBJpEkeYW7FM6i2+O9EUxZvCuuG2WPQBNayx
 73qG4RdHmB+qFWMlIp//iF8OviSSm2sd5+UEAJH8mYwrbCcv2gT7UjIaIRczpo4H
 JTkc/onR6y/qliUUrbLpMr40bJLA4+p9ZkqEGPS4lsKiUKf5SF7bLg59RNebIF75
 FZ52yhAw55KLiF0yokthlay8cBUjsd52lROjANkIe1iEHBiKoJRKLOA9WozY37qu
 3/9fKcddiPHxVF3ItcwhrldVru2ZxfWFRz/44rCPDTjKEfsuNN/2EkY8aVYCiHpO
 8gSXw/HjLPCSQIp6PVcqGSVZd1VWUYKcJY/xvCa3zQi0r7JdAmYUp76KCkmq9FgB
 DuQTkxM57ndKiz5WqlGU70mzht43/raqzPOQwLMwz5mGKj/nXvNMKFLQ1xhnyfeY
 vw7D2f/wqm74cTMhMS40IDlpJ81EoCYpsnzvtIHti3FPeo8wmVNz30H51JvFRdJm
 hzeju1tdSLwazGBIIAtjLSCLpnkaOq7rMwwGndGO5QCO/+A6gAC3iAKe4YFl+AXV
 CrS9BAdZSslYg+ddJYg6
 =8lmX
 -----END PGP SIGNATURE-----

Merge tag 'leds_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED updates from Jacek Anaszewski:
 "New LED class driver:
   - LED driver for TI LP3952 6-Channel Color LED

  LED core improvements:
   - Only descend into leds directory when CONFIG_NEW_LEDS is set
   - Add no-op gpio_led_register_device when LED subsystem is disabled
   - MAINTAINERS: Add file patterns for led device tree bindings

  LED Trigger core improvements:
   - return error if invalid trigger name is provided via sysfs

  LED class drivers improvements
   - is31fl32xx: define complete i2c_device_id table
   - is31fl32xx: fix typo in id and match table names
   - leds-gpio: Set of_node for created LED devices
   - pca9532: Add device tree support

  Conversion of IDE trigger to common disk trigger:
   - leds: convert IDE trigger to common disk trigger
   - leds: documentation: 'ide-disk' to 'disk-activity'
   - unicore32: use the new LED disk activity trigger
   - parisc: use the new LED disk activity trigger
   - mips: use the new LED disk activity trigger
   - arm: use the new LED disk activity trigger
   - powerpc: use the new LED disk activity trigger"

* tag 'leds_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: is31fl32xx: define complete i2c_device_id table
  leds: is31fl32xx: fix typo in id and match table names
  leds: LED driver for TI LP3952 6-Channel Color LED
  leds: leds-gpio: Set of_node for created LED devices
  leds: triggers: return error if invalid trigger name is provided via sysfs
  leds: Only descend into leds directory when CONFIG_NEW_LEDS is set
  leds: Add no-op gpio_led_register_device when LED subsystem is disabled
  unicore32: use the new LED disk activity trigger
  parisc: use the new LED disk activity trigger
  mips: use the new LED disk activity trigger
  arm: use the new LED disk activity trigger
  powerpc: use the new LED disk activity trigger
  leds: documentation: 'ide-disk' to 'disk-activity'
  leds: convert IDE trigger to common disk trigger
  leds: pca9532: Add device tree support
  MAINTAINERS: Add file patterns for led device tree bindings
2016-07-27 14:03:52 -07:00
Linus Torvalds d05d7f4079 Merge branch 'for-4.8/core' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe:

   - the big change is the cleanup from Mike Christie, cleaning up our
     uses of command types and modified flags.  This is what will throw
     some merge conflicts

   - regression fix for the above for btrfs, from Vincent

   - following up to the above, better packing of struct request from
     Christoph

   - a 2038 fix for blktrace from Arnd

   - a few trivial/spelling fixes from Bart Van Assche

   - a front merge check fix from Damien, which could cause issues on
     SMR drives

   - Atari partition fix from Gabriel

   - convert cfq to highres timers, since jiffies isn't granular enough
     for some devices these days.  From Jan and Jeff

   - CFQ priority boost fix idle classes, from me

   - cleanup series from Ming, improving our bio/bvec iteration

   - a direct issue fix for blk-mq from Omar

   - fix for plug merging not involving the IO scheduler, like we do for
     other types of merges.  From Tahsin

   - expose DAX type internally and through sysfs.  From Toshi and Yigal

* 'for-4.8/core' of git://git.kernel.dk/linux-block: (76 commits)
  block: Fix front merge check
  block: do not merge requests without consulting with io scheduler
  block: Fix spelling in a source code comment
  block: expose QUEUE_FLAG_DAX in sysfs
  block: add QUEUE_FLAG_DAX for devices to advertise their DAX support
  Btrfs: fix comparison in __btrfs_map_block()
  block: atari: Return early for unsupported sector size
  Doc: block: Fix a typo in queue-sysfs.txt
  cfq-iosched: Charge at least 1 jiffie instead of 1 ns
  cfq-iosched: Fix regression in bonnie++ rewrite performance
  cfq-iosched: Convert slice_resid from u64 to s64
  block: Convert fifo_time from ulong to u64
  blktrace: avoid using timespec
  block/blk-cgroup.c: Declare local symbols static
  block/bio-integrity.c: Add #include "blk.h"
  block/partition-generic.c: Remove a set-but-not-used variable
  block: bio: kill BIO_MAX_SIZE
  cfq-iosched: temporarily boost queue priority for idle classes
  block: drbd: avoid to use BIO_MAX_SIZE
  block: bio: remove BIO_MAX_SECTORS
  ...
2016-07-26 15:03:07 -07:00
Linus Torvalds 75a442efb1 Merge branch 'for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata updates from Tejun Heo:
 "libata saw quite a bit of activities in this cycle:

   - SMR drive support still being worked on

   - bug fixes and improvements to misc SCSI command emulation

   - some low level driver updates"

* 'for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (39 commits)
  libata-scsi: better style in ata_msense_*()
  AHCI: Clear GHC.IS to prevent unexpectly asserting INTx
  ata: sata_dwc_460ex: remove redundant dev_err call
  ata: define ATA_PROT_* in terms of ATA_PROT_FLAG_*
  libata: remove ATA_PROT_FLAG_DATA
  libata: remove ata_is_nodata
  ata: make lba_{28,48}_ok() use ATA_MAX_SECTORS{,_LBA48}
  libata-scsi: minor cleanup for ata_scsi_zbc_out_xlat
  libata-scsi: Fix ZBC management out command translation
  libata-scsi: Fix translation of REPORT ZONES command
  ata: Handle ATA NCQ NO-DATA commands correctly
  libata-eh: decode all taskfile protocols
  ata: fixup ATA_PROT_NODATA
  libsas: use ata_is_ncq() and ata_has_dma() accessors
  libata: use ata_is_ncq() accessors
  libata: return boolean values from ata_is_*
  libata-scsi: avoid repeated calculation of number of TRIM ranges
  libata-scsi: reject WRITE SAME (16) with n_block that exceeds limit
  libata-scsi: rename ata_msense_ctl_mode() to ata_msense_control()
  libata-scsi: fix D_SENSE bit relection in control mode page
  ...
2016-07-26 14:39:40 -07:00
Linus Torvalds a933f80d94 Merge branch 'for-4.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fix from Tejun Heo:
 "Another fallout from max_sectors bump a couple years ago.  The lite-on
  optical drive times out on large requests"

* 'for-4.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  libata: LITE-ON CX1-JB256-HP needs lower max_sectors
2016-07-23 11:46:59 +09:00
Tom Yan 737bee9308 libata-scsi: better style in ata_msense_*()
`changeable` is the "version" of mode page requested by the user.
It will be less confusing/misleading if we do not check it
"together" with the setting bits of the drive.

Not to mention that we currently have ata_mselect_*() implemented
in a way that each of them will serve exclusively a particular bit
on each page. The old style will hence make the condition look even
more unnecessarily arcane if the ata_msense_*() is reflecting more
than one bit.

Signed-off-by: Tom Yan <tom.ty89@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-20 11:19:35 -04:00
Pang Raymond 0516900adf AHCI: Clear GHC.IS to prevent unexpectly asserting INTx
Due to PCI subsystem behaviour, unloading AHCI driver will disable
MSI and enable INTx. When HBA supports MSIx or Multiple MSI, Driver's
irq handler doesn't clear GHC.IS register. It works well when reading or
writing data and GHC.IS is always non-zero. But when unloading driver
(or any other operation which causes disable MSIx and enable INTx), PCI
 subsystem uses config write(Rx04.bit10) to enable INTx. Because
GHC.IS is non-zero, HBA will falsely assume some port needs interrupt
service. Then it asserts INTx. To make things worse, when AHCI controller
shares the same interrupt pin with other PCI device, that PCI device's ISR
will be called and nobody de-asserts previous INTx.
This patch clears GHC.IS in ahci_port_stop() even when using MSIx or
MMSI to prevent this case. It ensures GHC.IS is zero before PCI subsystem
enables INTx.

tj: Minor updates to the comment.

Signed-off-by: Raymond Pang <raymond_rule@hotmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-20 11:10:10 -04:00
Wei Yongjun 01c292068e ata: sata_dwc_460ex: remove redundant dev_err call
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-19 14:32:04 -04:00
Christoph Hellwig 37f92d77dc ata: define ATA_PROT_* in terms of ATA_PROT_FLAG_*
This avoid the need to always translate between the two in ata_prot_flags
and generally cleans up the taskfile protocol usage.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-18 20:55:38 -04:00
Christoph Hellwig eb0effdf53 libata: remove ata_is_nodata
The only caller can just check for !ata_is_data instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-18 20:55:37 -04:00
Tejun Heo 1488a1e382 libata: LITE-ON CX1-JB256-HP needs lower max_sectors
Since 34b48db66e ("block: remove artifical max_hw_sectors cap"),
max_sectors is no longer limited to BLK_DEF_MAX_SECTORS and LITE-ON
CX1-JB256-HP keeps timing out with higher max_sectors.  Revert it to
the previous value.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: dgerasimov@gmail.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=121671
Cc: stable@vger.kernel.org # v3.19+
Fixes: 34b48db66e ("block: remove artifical max_hw_sectors cap")
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-18 18:40:00 -04:00
Damien Le Moal 2950cefac0 libata-scsi: minor cleanup for ata_scsi_zbc_out_xlat
The reset_all variable name is misleading as this bit is also applicable to
open, close, and finish actions. So rename that variable to "all" and remove
the unnecessary mask operation that's already done earlier.

Signed-off-by: Damien Le Moal <damien.lemoal@hgst.com>
[hch: split from the previous patch]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-15 08:08:14 -04:00
Damien Le Moal ee194b7531 libata-scsi: Fix ZBC management out command translation
The subcommand for NCQ NON-DATA must be specified in the feature
(low byte), not the high-order count byte.  Also make sure to properly
cast the all bit to a u16 before shiting it by 8 to avoid undefined
behavior.

Signed-off-by: Damien Le Moal <damien.lemoal@hgst.com>
[hch: split the original patch into two, updated changelog]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-15 08:08:14 -04:00
Damien Le Moal 3f17422b42 libata-scsi: Fix translation of REPORT ZONES command
Include reporting options when translating REPORT ZONES commmand to
ATA NCQ, and make sure we only look at the actually specified bits
in the CDB for the options.

Signed-off-by: Damien Le Moal <damien.lemoal@hgst.com>
[hch: update patch description]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-15 08:08:13 -04:00
Hannes Reinecke 5b844b63dd ata: Handle ATA NCQ NO-DATA commands correctly
Add a new taskfile protocol ATA_PROT_NCQ_NODATA to handle
ATA NCQ NO-DATA commands correctly.
And fixup ata_scsi_zbc_out_xlat() to use it.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-15 08:08:13 -04:00
Hannes Reinecke 5b51ba6178 libata-eh: decode all taskfile protocols
Some taskfile protocol values where missing in ata_eh_link_report().

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-14 10:47:23 -04:00
Hannes Reinecke bd18bc04ca ata: fixup ATA_PROT_NODATA
The taskfile protocol is a numeric value, and can not be ORed.  Currently
this is harmless as the protocol is always zeroed before, but if it ever
has a non-zero value the ORing would create incorrect results.

Signed-off-by: Hannes Reinecke <hare@suse.de>
[hch: updated patch description]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-14 10:47:20 -04:00
Hannes Reinecke 179b310ae7 libata: use ata_is_ncq() accessors
Use accessor functions instead of the raw value.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-14 10:44:57 -04:00
Tom Yan 2983860c76 libata-scsi: avoid repeated calculation of number of TRIM ranges
Currently libata statically allows only 1-block (512-byte) payload
for each TRIM command. Each payload can carry 64 TRIM ranges since
each range requires 8 bytes.

It is silly to keep doing the calculation (512 / 8) in different
places. Hence, define the new ATA_MAX_TRIM_RNUM for the result.

Signed-off-by: Tom Yan <tom.ty89@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-12 16:37:17 -04:00
Tom Yan 5c79097a28 libata-scsi: reject WRITE SAME (16) with n_block that exceeds limit
Currently if a WRITE SAME (16) command is issued to the SATL with
"number of blocks" that is larger than the "Maximum write same length"
(which is the maximum number of blocks per TRIM command allowed in
libata, currently 65535 * 512 / 8 blocks), the SATL will accept the
command and translate it to a TRIM command with the upper limit.

However, according to SBC (as of sbc4r11.pdf), the "device server"
should terminate the command with "Invalid field in CDB" in that case.

Signed-off-by: Tom Yan <tom.ty89@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-12 16:37:13 -04:00
Tom Yan f086b7489a libata-scsi: rename ata_msense_ctl_mode() to ata_msense_control()
To make it consistent with the recently added ata_mselect_control().
We probably shouldn't have the word "mode" in its name anyway, since
that's not the case for other ata_msense_*() / ata_mselect_*() either.

Signed-off-by: Tom Yan <tom.ty89@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-12 14:58:46 -04:00
Tom Yan c9cd3504eb libata-scsi: fix D_SENSE bit relection in control mode page
The bit should always be set to 1 when the requested version of
page is "changeable" because we've made it so in ata_mselect_control().
Also, it should always be set to 1 if ATA_DFLAG_D_SENSE is set (when
the requested version of page is "current" or "default").

Signed-off-by: Tom Yan <tom.ty89@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-12 14:58:43 -04:00
Colin Ian King a548cc00cf ata: hpt366: fix incorrect mask when checking at cmd_high_time
According to the HPT366 data sheet, PCI config space dword 0x40-0x43
bits 11:8 specify the primary drive cmd_high_time, however,
currently just 3 bits of the 4 are being used because the mask
is 0x700 and not 0x0f00.  Fix the mask, allowing for the 40MHz clock
to be detected.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-12 11:02:05 -04:00
Tom Yan 29a37ea401 libata-scsi: correct SPC version descriptor
The comment suggests we should be having an SPC-3 version descriptor
but the 0260h is the code for "SPC-2 (no version claimed)". Correct
it to 0300h so that it has the "SPC-3 (no version claimed)" descriptor.

Note that we are claiming SPC-3 version compatibility in the VERSION
field of the standard INQUIRY data. Therefore, I assume the typo was
on the code but not on the comment.

Signed-off-by: Tom Yan <tom.ty89@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-12 10:54:57 -04:00
Tom Yan 415ffdde15 libata-scsi: set CmdQue bit in standard INQUIRY data to 1
Avoid performance bottleneck when being SCSI pass-through'd to
virtual machines with other OSes (e.g. Windows) via virtio-scsi
and scsi-block in qemu.

Ref.: https://github.com/YanVugenfirer/kvm-guest-drivers-windows/issues/63

Signed-off-by: Tom Yan <tom.ty89@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-12 10:54:54 -04:00
Tom Yan 0c12735e8a libata-scsi: fix SET FEATURES "filtering" for ata_msense_caching()
Without this fix, the DRA bit of the caching mode page would not
be updated when the read look-ahead feature is toggled (e.g. with
`smartctl --set`), but will only be until, for example, the write
cache feature is touched.

Signed-off-by: Tom Yan <tom.ty89@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-12 10:52:49 -04:00
Tom Yan 56b8cbabb4 libata-scsi: set correct VERSION field for ZAC devices
Commit 856c466393 ("libata: support device-managed ZAC devices")
had the line that "bumps" the VERSION field in standard INQUIRY data
removed. Add it back and claim SPC-5 version compatibility, which
matches with the current version descriptor "SPC-5 (no version claimed)"
that is used for ZAC devices.

Signed-off-by: Tom Yan <tom.ty89@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-12 10:46:45 -04:00
Tom Yan 8554e5e1c7 libata-scsi: correct cbd to CDB in comment
It's Command Descriptor Block. Also capitalized it.

Signed-off-by: Tom Yan <tom.ty89@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-06 13:32:05 -04:00
Tom Yan a3e8ab1b46 libata-scsi: do not respond with "invalid field" for FORMAT UNIT
It does not make sense and is confusing to respond with "Invalid
field in CDB" while we have no support at all implemented for
FORMAT UNIT. It is decent to let it go to the default, which
will respond with "Invalid command operation code" instead.

Signed-off-by: Tom Yan <tom.ty89@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-07-06 13:32:03 -04:00
Linus Torvalds de4921ce9b Merge branch 'for-4.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
 "Two trivial fixes - one for a bug in the allocation failure path and
  the other a compiler warning fix"

* 'for-4.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ata: sata_mv: fix mis-conversion in mv_write_cached_reg()
  ata: fix return value check in ahci_seattle_get_port_info()
2016-06-28 12:11:31 -07:00
Iago Abal 3e70af86e5 drivers: ata: pata_arasan_cf: use the same name for the same lock
Note that `&acdev->host->lock' and `qc->ap->lock' denote the same lock, and it's
particularly confusing to spin_lock on the former but spin_unlock on the latter.

Signed-off-by: Iago Abal <mail@iagoabal.eu>
Signed-off-by: Tejun Heo <tj@kernel.org>
2016-06-28 12:49:40 -04:00
Stephan Linz eb25cb9956 leds: convert IDE trigger to common disk trigger
This patch converts the IDE specific LED trigger to a generic disk
activity LED trigger. The libata core is now a trigger source just
like before the IDE disk driver. It's merely a replacement of the
string ide by disk.

The patch is taken from http://dev.gentoo.org/~josejx/ata.patch and is
widely used by any ibook/powerbook owners with great satisfaction.
Likewise, it is very often used successfully on different ARM platforms.

Unlike the original patch, the existing 'ide-disk' trigger is still
available for backward compatibility. That reduce the amount of patches
in affected device trees out of the mainline kernel. For further
development, the new name 'disk-activity' should be used.

Cc: Joseph Jezak <josejx@gentoo.org>
Cc: Jörg Sommer <joerg@alea.gnuu.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Stephan Linz <linz@li-pro.net>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-06-20 09:57:56 +02:00