Граф коммитов

3362 Коммитов

Автор SHA1 Сообщение Дата
Yinghai Lu f41f064cf4 PCI: Workaround missing pci_set_master in pci drivers
Ben Herrenschmidt found that commit 928bea9648 ("PCI: Delay enabling
bridges until they're needed") breaks PCI in some powerpc environments.

The reason is that the PCIe port driver will call pci_enable_device() on
the bridge, so the device is enabled, but skips pci_set_master because
pcie_port_auto and no acpi on powerpc.

Because of that, pci_enable_bridge() later on (called as a result of the
child device driver doing pci_enable_device) will see the bridge as
already enabled and will not call pci_set_master() on it.

Fixed by add checking in pci_enable_bridge, and call pci_set_master
if driver skip that.

That will make the code more robot and wade off problem for missing
pci_set_master in drivers.

Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-28 13:25:30 -07:00
Rafael J. Wysocki 834145156b PCI / ACPI / PM: Clear pme_poll for devices in D3cold on wakeup
Commit 448bd85 (PCI/PM: add PCIe runtime D3cold support) added a
piece of code to pci_acpi_wake_dev() causing that function to behave
in a special way for devices in D3cold (so that their configuration
registers are not accessed before those devices are resumed).
However, it didn't take the clearing of the pme_poll flag into
account.  That has to be done for all devices, even if they are in
D3cold, or pci_pme_list_scan() will not know that wakeup has been
signaled for the device and will poll its PME Status bit
unnecessarily.

Fix the problem by moving the clearing of the pme_poll flag in
pci_acpi_wake_dev() before the code introduced by commit 448bd85.

Reported-and-tested-by: David E. Box <david.e.box@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: 3.6+ <stable@vger.kernel.org> # 3.6+
2013-09-20 00:24:43 +02:00
Martin Schwidefsky 0244ad004a Remove GENERIC_HARDIRQ config option
After the last architecture switched to generic hard irqs the config
options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code
for !CONFIG_GENERIC_HARDIRQS can be removed.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-13 15:09:52 +02:00
Linus Torvalds 02b9735c12 ACPI and power management fixes for 3.12-rc1
1) ACPI-based PCI hotplug (ACPIPHP) fixes related to spurious events
 
   After the recent ACPIPHP changes we've seen some interesting breakage
   on a system that triggers device check notifications during boot for
   non-existing devices.  Although those notifications are really
   spurious, we should be able to deal with them nevertheless and that
   shouldn't introduce too much overhead.  Four commits to make that
   work properly.
 
  2) Memory hotplug and hibernation mutual exclusion rework
 
   This was maent to be a cleanup, but it happens to fix a classical
   ABBA deadlock between system suspend/hibernation and ACPI memory
   hotplug which is possible if they are started roughly at the same
   time.  Three commits rework memory hotplug so that it doesn't
   acquire pm_mutex and make hibernation use device_hotplug_lock
   which prevents it from racing with memory hotplug.
 
  3) ACPI Intel LPSS (Low-Power Subsystem) driver crash fix
 
   The ACPI LPSS driver crashes during boot on Apple Macbook Air with
   Haswell that has slightly unusual BIOS configuration in which one
   of the LPSS device's _CRS method doesn't return all of the information
   expected by the driver.  Fix from Mika Westerberg, for stable.
 
  4) ACPICA fix related to Store->ArgX operation
 
   AML interpreter fix for obscure breakage that causes AML to be
   executed incorrectly on some machines (observed in practice).  From
   Bob Moore.
 
  5) ACPI core fix for PCI ACPI device objects lookup
 
   There still are cases in which there is more than one ACPI device
   object matching a given PCI device and we don't choose the one that
   the BIOS expects us to choose, so this makes the lookup take more
   criteria into account in those cases.
 
  6) Fix to prevent cpuidle from crashing in some rare cases
 
   If the result of cpuidle_get_driver() is NULL, which can happen on
   some systems, cpuidle_driver_ref() will crash trying to use that
   pointer and the Daniel Fu's fix prevents that from happening.
 
  7) cpufreq fixes related to CPU hotplug
 
   Stephen Boyd reported a number of concurrency problems with cpufreq
   related to CPU hotplug which are addressed by a series of fixes
   from Srivatsa S Bhat and Viresh Kumar.
 
  8) cpufreq fix for time conversion in time_in_state attribute
 
   Time conversion carried out by cpufreq when user space attempts to
   read /sys/devices/system/cpu/cpu*/cpufreq/stats/time_in_state won't
   work correcty if cputime_t doesn't map directly to jiffies.  Fix
   from Andreas Schwab.
 
  9) Revert of a troublesome cpufreq commit
 
   Commit 7c30ed5 (cpufreq: make sure frequency transitions are
   serialized) was intended to address some known concurrency problems
   in cpufreq related to the ordering of transitions, but unfortunately
   it introduced several problems of its own, so I decided to revert it
   now and address the original problems later in a more robust way.
 
 10) Intel Haswell CPU models for intel_pstate from Nell Hardcastle.
 
 11) cpufreq fixes related to system suspend/resume
 
   The recent cpufreq changes that made it preserve CPU sysfs attributes
   over suspend/resume cycles introduced a possible NULL pointer
   dereference that caused it to crash during the second attempt to
   suspend.  Three commits from Srivatsa S Bhat fix that problem and a
   couple of related issues.
 
 12) cpufreq locking fix
 
   cpufreq_policy_restore() should acquire the lock for reading, but
   it acquires it for writing.  Fix from Lan Tianyu.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABCAAGBQJSMbdRAAoJEKhOf7ml8uNsiFkQAKSh1iBXuiUCxBApEGZgoQio
 8lmnuyWdhNQWdjZTnh7ptjpDxdrWhxcoxvoaGABU++reDObjef1QnyrQtdO3r8dl
 oy0C/YGh5kq5SIffIDEwPIb/ipDe/47cgRMW8iBlnViDa1MJBqICuLyefcTRIrKp
 QGvv0owUM2o7TXpA10+qm8zXjv6m5mu1DTtxYI+2Eodhwi54neAqb+aKMspa2thy
 V9KFcVv3Td4rJrNvw6BhXNM81QbaYpRxaK3DRr1T6SM++EKvbqYFA1jgW24YvqTL
 nrCZlDMb6KRww5DCxA/ns9Kx5H+ZyicoRwdtAM3PBYA6MGqsLqPozC/8VKV1fSvZ
 sgUdbUSuLqKRAkOqM1bjKAhi9PdCGBvkQAg2AqbRK6IBl4HJC8xhdb5E6eZ/J42G
 GyNBpKef7wVJwYKXE2hSChZ5dYjqMizNHWxFHf8Xy1dveExbQ2nmSJmaWMy2A3kx
 YOXFkcTV5F6GOIZB8WCRruzUalff9xal4G+iVhGF+AZIOCm7bC+FDXfwIS82uVor
 ej2l+uQLLZCB499IRmM6942ZIAXshmtN7eRfGtKBc6jsbSCEdQDqf1Z7oRwqAD6h
 WkD/k/zz30CyM8y4snOkAXkZgqAQsZodtqfowE3e9OHd51tfcNiqdht+obwCx+eD
 MWXc2xATMAX6NcZTXSZS
 =U/Jw
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-fixes-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management fixes from Rafael Wysocki:
 "All of these commits are fixes that have emerged recently and some of
  them fix bugs introduced during this merge window.

  Specifics:

   1) ACPI-based PCI hotplug (ACPIPHP) fixes related to spurious events

      After the recent ACPIPHP changes we've seen some interesting
      breakage on a system that triggers device check notifications
      during boot for non-existing devices.  Although those
      notifications are really spurious, we should be able to deal with
      them nevertheless and that shouldn't introduce too much overhead.
      Four commits to make that work properly.

   2) Memory hotplug and hibernation mutual exclusion rework

      This was maent to be a cleanup, but it happens to fix a classical
      ABBA deadlock between system suspend/hibernation and ACPI memory
      hotplug which is possible if they are started roughly at the same
      time.  Three commits rework memory hotplug so that it doesn't
      acquire pm_mutex and make hibernation use device_hotplug_lock
      which prevents it from racing with memory hotplug.

   3) ACPI Intel LPSS (Low-Power Subsystem) driver crash fix

      The ACPI LPSS driver crashes during boot on Apple Macbook Air with
      Haswell that has slightly unusual BIOS configuration in which one
      of the LPSS device's _CRS method doesn't return all of the
      information expected by the driver.  Fix from Mika Westerberg, for
      stable.

   4) ACPICA fix related to Store->ArgX operation

      AML interpreter fix for obscure breakage that causes AML to be
      executed incorrectly on some machines (observed in practice).
      From Bob Moore.

   5) ACPI core fix for PCI ACPI device objects lookup

      There still are cases in which there is more than one ACPI device
      object matching a given PCI device and we don't choose the one
      that the BIOS expects us to choose, so this makes the lookup take
      more criteria into account in those cases.

   6) Fix to prevent cpuidle from crashing in some rare cases

      If the result of cpuidle_get_driver() is NULL, which can happen on
      some systems, cpuidle_driver_ref() will crash trying to use that
      pointer and the Daniel Fu's fix prevents that from happening.

   7) cpufreq fixes related to CPU hotplug

      Stephen Boyd reported a number of concurrency problems with
      cpufreq related to CPU hotplug which are addressed by a series of
      fixes from Srivatsa S Bhat and Viresh Kumar.

   8) cpufreq fix for time conversion in time_in_state attribute

      Time conversion carried out by cpufreq when user space attempts to
      read /sys/devices/system/cpu/cpu*/cpufreq/stats/time_in_state
      won't work correcty if cputime_t doesn't map directly to jiffies.
      Fix from Andreas Schwab.

   9) Revert of a troublesome cpufreq commit

      Commit 7c30ed5 (cpufreq: make sure frequency transitions are
      serialized) was intended to address some known concurrency
      problems in cpufreq related to the ordering of transitions, but
      unfortunately it introduced several problems of its own, so I
      decided to revert it now and address the original problems later
      in a more robust way.

  10) Intel Haswell CPU models for intel_pstate from Nell Hardcastle.

  11) cpufreq fixes related to system suspend/resume

      The recent cpufreq changes that made it preserve CPU sysfs
      attributes over suspend/resume cycles introduced a possible NULL
      pointer dereference that caused it to crash during the second
      attempt to suspend.  Three commits from Srivatsa S Bhat fix that
      problem and a couple of related issues.

  12) cpufreq locking fix

      cpufreq_policy_restore() should acquire the lock for reading, but
      it acquires it for writing.  Fix from Lan Tianyu"

* tag 'pm+acpi-fixes-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (25 commits)
  cpufreq: Acquire the lock in cpufreq_policy_restore() for reading
  cpufreq: Prevent problems in update_policy_cpu() if last_cpu == new_cpu
  cpufreq: Restructure if/else block to avoid unintended behavior
  cpufreq: Fix crash in cpufreq-stats during suspend/resume
  intel_pstate: Add Haswell CPU models
  Revert "cpufreq: make sure frequency transitions are serialized"
  cpufreq: Use signed type for 'ret' variable, to store negative error values
  cpufreq: Remove temporary fix for race between CPU hotplug and sysfs-writes
  cpufreq: Synchronize the cpufreq store_*() routines with CPU hotplug
  cpufreq: Invoke __cpufreq_remove_dev_finish() after releasing cpu_hotplug.lock
  cpufreq: Split __cpufreq_remove_dev() into two parts
  cpufreq: Fix wrong time unit conversion
  cpufreq: serialize calls to __cpufreq_governor()
  cpufreq: don't allow governor limits to be changed when it is disabled
  ACPI / bind: Prefer device objects with _STA to those without it
  ACPI / hotplug / PCI: Avoid parent bus rescans on spurious device checks
  ACPI / hotplug / PCI: Use _OST to notify firmware about notify status
  ACPI / hotplug / PCI: Avoid doing too much for spurious notifies
  ACPICA: Fix for a Store->ArgX when ArgX contains a reference to a field.
  ACPI / hotplug / PCI: Don't trim devices before scanning the namespace
  ...
2013-09-12 11:22:45 -07:00
Rafael J. Wysocki 08e97ff277 Merge branch 'acpi-pci-hotplug'
* acpi-pci-hotplug:
  ACPI / hotplug / PCI: Avoid parent bus rescans on spurious device checks
  ACPI / hotplug / PCI: Use _OST to notify firmware about notify status
  ACPI / hotplug / PCI: Avoid doing too much for spurious notifies
  ACPI / hotplug / PCI: Don't trim devices before scanning the namespace
2013-09-10 23:15:02 +02:00
Rafael J. Wysocki a47d8c8e72 ACPI / hotplug / PCI: Avoid parent bus rescans on spurious device checks
In the current ACPIPHP notify handler we always go directly for a
rescan of the parent bus if we get a device check notification for
a device that is not a bridge.  However, this obviously is
overzealous if nothing really changes, because this way we may rescan
the whole PCI hierarchy pretty much in vain.

That happens on Alex Williamson's machine whose ACPI tables contain
device objects that are supposed to coresspond to PCIe root ports,
but those ports aren't physically present (or at least they aren't
visible in the PCI config space to us).  The BIOS generates multiple
device check notifies for those objects during boot and for each of
them we go straight for the parent bus rescan, but the parent bus is
the root bus in this particular case.  In consequence, we rescan the
whole PCI bus from the top several times in a row, which is
completely unnecessary, increases boot time by 50% (after previous
fixes) and generates excess dmesg output from the PCI subsystem.

Fix the problem by checking if we can find anything new in the
slot corresponding to the device we've got a device check notify
for and doing nothig if that's not the case.

The spec (ACPI 5.0, Section 5.6.6) appears to mandate this behavior,
as it says:

  Device Check. Used to notify OSPM that the device either appeared
  or disappeared. If the device has appeared, OSPM will re-enumerate
  from the parent. If the device has disappeared, OSPM will
  invalidate the state of the device. OSPM may optimize out
  re-enumeration.

Therefore, according to the spec, we are free to do nothing if
nothing changes.

References: https://bugzilla.kernel.org/show_bug.cgi?id=60865
Reported-and-tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-09 21:41:07 +02:00
Rafael J. Wysocki e532e84ea1 ACPI / hotplug / PCI: Use _OST to notify firmware about notify status
The spec suggests that we should use _OST to notify the platform
about the status of notifications it sends us, for example so that
it doesn't repeate a notification that has been handled already.

This turns out to help reduce the amount of diagnostic output from
the ACPIPHP subsystem and speed up boot on at least one system that
generates multiple device check notifies for PCIe devices on the root
bus during boot.

Reported-and-tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-07 03:43:58 +02:00
Rafael J. Wysocki 2dc41281b1 ACPI / hotplug / PCI: Avoid doing too much for spurious notifies
Sometimes we may get a spurious device check or bus check notify for
a hotplug device and in those cases we should avoid doing all of the
configuration work needed when something actually changes.  To that
end, check the return value of pci_scan_slot() in enable_slot() and
bail out early if it is 0.

This turns out to help reduce the amount of diagnostic output from
the ACPIPHP subsystem and speed up boot on at least one system that
generates multiple device check notifies for PCIe devices on the root
bus during boot.

Reported-and-tested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-07 03:43:35 +02:00
Linus Torvalds b4b50fd78b ARM: SoC platform changes for 3.12
This branch contains mostly additions and changes to platform enablement
 and SoC-level drivers. Since there's sometimes a dependency on device-tree
 changes, there's also a fair amount of those in this branch.
 
 Pieces worth mentioning are:
 
 - Mbus driver for Marvell platforms, allowing kernel configuration
   and resource allocation of on-chip peripherals.
 - Enablement of the mbus infrastructure from Marvell PCI-e drivers.
 - Preparation of MSI support for Marvell platforms.
 - Addition of new PCI-e host controller driver for Tegra platforms
 - Some churn caused by sharing of macro names between i.MX 6Q and 6DL
   platforms in the device tree sources and header files.
 - Various suspend/PM updates for Tegra, including LP1 support.
 - Versatile Express support for MCPM, part of big little support.
 - Allwinner platform support for A20 and A31 SoCs (dual and quad Cortex-A7)
 - OMAP2+ support for DRA7, a new Cortex-A15-based SoC.
 
 The code that touches other architectures are patches moving
 MSI arch-specific functions over to weak symbols and removal of
 ARCH_SUPPORTS_MSI, acked by PCI maintainers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSKhYmAAoJEIwa5zzehBx322AP/1ONYs8o8f7/Gzq6lZvTN6T3
 0pBTApg6Jfioi3lwKvUAEIcsW82YKQ+UZkbW66GQH6+Ri4aZJKZHuz0+JPU67OJ4
 LtSLuzVWrymy2VOOUvAnS/SXkOZw/pHhU4cLNHn1dMndhUL1Uqp9/XwuiHEQyFsP
 uOkpcBtIu0EWElov0PKKZ5SWBg8JJs2vy5ydiViGelWHCrZvDDZkWzIsDcBQxJLQ
 juzT4+JE+KOu7vKmfw78o6iHoCS2TBRAN9YUCajRb8Wl+out1hrTahHnDWaZ5Mce
 EskcQNkJROqFbjD4k3ABN4XGTv2VDmrztIwFe0SEQ7Dz/9ypCrBGT69uI9xIqTXr
 GwVRIwAUFTpMupK0gy93z1ajV3N0CXV79out9+jQNUQybYE+czp8QOyhmuc1tZx0
 8fn9jlBQe9Vy6yrs39gEcE7nUwrayeyQ+6UvqqwsE2pWZabNAnCMSPX5+QIu+T/3
 tQ7+jYmfFeserp1sIDOHOnxfhtW9EI6U9d1h/DUCwrsuFdkL9ha4M/vh9Pwgye98
 tBdz0T4yE39AJQwwFWRkv1jcQKcGu6WqJanmvS4KRBksGwuLWxy+ewOnkz2ifS25
 ZYSyxAryZRBvQRqlOK11rXPfRcbGcY0MG9lkKX96rGcyWEizgE1DdjxXD8HoIleN
 R8heV6GX5OzlFLGX2tKK
 =fJ5x
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Olof Johansson:
 "This branch contains mostly additions and changes to platform
  enablement and SoC-level drivers.  Since there's sometimes a
  dependency on device-tree changes, there's also a fair amount of
  those in this branch.

  Pieces worth mentioning are:

   - Mbus driver for Marvell platforms, allowing kernel configuration
     and resource allocation of on-chip peripherals.
   - Enablement of the mbus infrastructure from Marvell PCI-e drivers.
   - Preparation of MSI support for Marvell platforms.
   - Addition of new PCI-e host controller driver for Tegra platforms
   - Some churn caused by sharing of macro names between i.MX 6Q and 6DL
     platforms in the device tree sources and header files.
   - Various suspend/PM updates for Tegra, including LP1 support.
   - Versatile Express support for MCPM, part of big little support.
   - Allwinner platform support for A20 and A31 SoCs (dual and quad
     Cortex-A7)
   - OMAP2+ support for DRA7, a new Cortex-A15-based SoC.

  The code that touches other architectures are patches moving MSI
  arch-specific functions over to weak symbols and removal of
  ARCH_SUPPORTS_MSI, acked by PCI maintainers"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (266 commits)
  tegra-cpuidle: provide stub when !CONFIG_CPU_IDLE
  PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource
  ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list
  ARM: dts: vf610-twr: enable i2c0 device
  ARM: dts: i.MX51: Add one more I2C2 pinmux entry
  ARM: dts: i.MX51: Move pins configuration under "iomuxc" label
  ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog
  ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator
  ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX
  ARM: dts: i.MX27: Disable AUDMUX in the template
  ARM: dts: wandboard: Add support for SDIO bcm4329
  ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template
  ARM: dts: imx53-qsb: Make USBH1 functional
  ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module
  ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module
  ARM: dts: imx6qdl-sabresd: Add touchscreen support
  ARM: imx: add ocram clock for imx53
  ARM: dts: imx: ocram size is different between imx6q and imx6dl
  ARM: dts: imx27-phytec-phycore-som: Fix regulator settings
  ARM: dts: i.MX27: Remove clock name from CPU node
  ...
2013-09-06 13:30:06 -07:00
Linus Torvalds cc998ff881 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking changes from David Miller:
 "Noteworthy changes this time around:

   1) Multicast rejoin support for team driver, from Jiri Pirko.

   2) Centralize and simplify TCP RTT measurement handling in order to
      reduce the impact of bad RTO seeding from SYN/ACKs.  Also, when
      both timestamps and local RTT measurements are available prefer
      the later because there are broken middleware devices which
      scramble the timestamp.

      From Yuchung Cheng.

   3) Add TCP_NOTSENT_LOWAT socket option to limit the amount of kernel
      memory consumed to queue up unsend user data.  From Eric Dumazet.

   4) Add a "physical port ID" abstraction for network devices, from
      Jiri Pirko.

   5) Add a "suppress" operation to influence fib_rules lookups, from
      Stefan Tomanek.

   6) Add a networking development FAQ, from Paul Gortmaker.

   7) Extend the information provided by tcp_probe and add ipv6 support,
      from Daniel Borkmann.

   8) Use RCU locking more extensively in openvswitch data paths, from
      Pravin B Shelar.

   9) Add SCTP support to openvswitch, from Joe Stringer.

  10) Add EF10 chip support to SFC driver, from Ben Hutchings.

  11) Add new SYNPROXY netfilter target, from Patrick McHardy.

  12) Compute a rate approximation for sending in TCP sockets, and use
      this to more intelligently coalesce TSO frames.  Furthermore, add
      a new packet scheduler which takes advantage of this estimate when
      available.  From Eric Dumazet.

  13) Allow AF_PACKET fanouts with random selection, from Daniel
      Borkmann.

  14) Add ipv6 support to vxlan driver, from Cong Wang"

Resolved conflicts as per discussion.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1218 commits)
  openvswitch: Fix alignment of struct sw_flow_key.
  netfilter: Fix build errors with xt_socket.c
  tcp: Add missing braces to do_tcp_setsockopt
  caif: Add missing braces to multiline if in cfctrl_linkup_request
  bnx2x: Add missing braces in bnx2x:bnx2x_link_initialize
  vxlan: Fix kernel panic on device delete.
  net: mvneta: implement ->ndo_do_ioctl() to support PHY ioctls
  net: mvneta: properly disable HW PHY polling and ensure adjust_link() works
  icplus: Use netif_running to determine device state
  ethernet/arc/arc_emac: Fix huge delays in large file copies
  tuntap: orphan frags before trying to set tx timestamp
  tuntap: purge socket error queue on detach
  qlcnic: use standard NAPI weights
  ipv6:introduce function to find route for redirect
  bnx2x: VF RSS support - VF side
  bnx2x: VF RSS support - PF side
  vxlan: Notify drivers for listening UDP port changes
  net: usbnet: update addr_assign_type if appropriate
  driver/net: enic: update enic maintainers and driver
  driver/net: enic: Exposing symbols for Cisco's low latency driver
  ...
2013-09-05 14:54:29 -07:00
Rafael J. Wysocki 89ec2f2ee1 ACPI / hotplug / PCI: Don't trim devices before scanning the namespace
In acpiphp_bus_add() we first remove device objects corresponding to
the given handle and the ACPI namespace branch below it, which are
then re-created by acpi_bus_scan().  This used to be done to clean
up after surprise removals, but now we do the cleanup through
trim_stale_devices() which checks if the devices in question are
actually gone before removing them, so the device hierarchy trimming
in acpiphp_bus_add() is not necessary any more and, moreover, it may
lead to problems if it removes device objects corresponding to
devices that are actually present.

For this reason, remove the leftover acpiphp_bus_trim() from
acpiphp_bus_add().

Reported-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-09-05 23:39:20 +02:00
Linus Torvalds a923874198 PCI changes for the v3.12 merge window:
PCI device hotplug
     - Use PCIe native hotplug, not ACPI hotplug, when possible (Neil Horman)
     - Assign resources on per-host bridge basis (Yinghai Lu)
 
   MPS (Max Payload Size)
     - Allow larger MPS settings below hotplug-capable Root Port (Yijing Wang)
     - Add warnings about unsafe MPS settings (Yijing Wang)
     - Simplify interface and messages (Bjorn Helgaas)
 
   SR-IOV
     - Return -ENOSYS on non-SR-IOV devices (Stefan Assmann)
     - Update NumVFs register when disabling SR-IOV (Yijing Wang)
 
   Virtualization
     - Add bus and slot reset support (Alex Williamson)
     - Fix ACS (Access Control Services) issues (Alex Williamson)
 
   Miscellaneous
     - Simplify PCIe Capability accessors (Bjorn Helgaas)
     - Add pcibios_pm_ops for arch-specific hibernate stuff (Sebastian Ott)
     - Disable decoding during BAR sizing only when necessary (Zoltan Kiss)
     - Delay enabling bridges until they're needed (Yinghai Lu)
     - Split Designware support into Synopsys and Exynos parts (Jingoo Han)
     - Convert class code to use dev_groups (Greg Kroah-Hartman)
     - Cleanup Designware and Exynos I/O access wrappers (Seungwon Jeon)
     - Fix bridge I/O window alignment (Bjorn Helgaas)
     - Add pci_wait_for_pending_transaction() (Casey Leedom)
     - Use devm_ioremap_resource() in Marvell driver (Tushar Behera)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSJiBcAAoJEFmIoMA60/r8xJgQAJML7aDmo3ASfabGrfY12fUR
 10Miud/MzlX8/AjPSVW0BodpPMmyQY/Viqd9nBWVm3OR9JSrBp2Q8a3Qge5c0GsE
 dMpO3bJrjOmexaAP3wqEQ/NNyL+iIO7fVQsjHf0uyYTS359Ed0TMWsLQwjAa+h2d
 bB2Ul1AqNiXywCj8Kxnzz52DLnRn1g2YVwp7hACCXyQ+NDVDqhgbxLBnbEFkQqOr
 jAF38xz6DuyVTF+EzIIUDWsOLuo5s0qC3aai36yrVwUuuppBFFX4QRoUOaerZRwe
 2WCSa8jqI5QnOPU0LYIPr24DJa6LKCtuSJXUE5hKZgz70UsNefRkV3F5lzB/YlXt
 t5PYH9B27fEyokh8gGmyytAKkutbm8RH3+99cjNzf/UKuiJgzZE27qi3A+DEpJft
 Igl4WoIC39/fhDSvmpGfd7BWvEkdz86UKdB9f7Wz6+NpWoDLiYiwqkOGuF0bo7zo
 3vH48s5VAR8avyGeSUPGFcP9Bq+Hi936xzZxq+Hrj0hASPTpOMTLD1XCqomONO26
 x6x0ipHRDTh3TixHN7KENqyIJCkY/vlzt4kDnzytZe4TupJX+hlG74fq98hpoEFy
 y2RPiLB8jahPf+fr4cmltqiv6WAhcUcJuGdcAF+Ht4wlrIDELR8e7AKH4Q04B/5O
 I8FCB6bay8mvW6MMSXql
 =uNEk
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI changes from Bjorn Helgaas:

  PCI device hotplug:
    - Use PCIe native hotplug, not ACPI hotplug, when possible (Neil Horman)
    - Assign resources on per-host bridge basis (Yinghai Lu)

  MPS (Max Payload Size):
    - Allow larger MPS settings below hotplug-capable Root Port (Yijing Wang)
    - Add warnings about unsafe MPS settings (Yijing Wang)
    - Simplify interface and messages (Bjorn Helgaas)

  SR-IOV:
    - Return -ENOSYS on non-SR-IOV devices (Stefan Assmann)
    - Update NumVFs register when disabling SR-IOV (Yijing Wang)

  Virtualization:
    - Add bus and slot reset support (Alex Williamson)
    - Fix ACS (Access Control Services) issues (Alex Williamson)

  Miscellaneous:
    - Simplify PCIe Capability accessors (Bjorn Helgaas)
    - Add pcibios_pm_ops for arch-specific hibernate stuff (Sebastian Ott)
    - Disable decoding during BAR sizing only when necessary (Zoltan Kiss)
    - Delay enabling bridges until they're needed (Yinghai Lu)
    - Split Designware support into Synopsys and Exynos parts (Jingoo Han)
    - Convert class code to use dev_groups (Greg Kroah-Hartman)
    - Cleanup Designware and Exynos I/O access wrappers (Seungwon Jeon)
    - Fix bridge I/O window alignment (Bjorn Helgaas)
    - Add pci_wait_for_pending_transaction() (Casey Leedom)
    - Use devm_ioremap_resource() in Marvell driver (Tushar Behera)

* tag 'pci-v3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (63 commits)
  PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when available
  PCI: exynos: Add I/O access wrappers
  PCI: designware: Drop "addr" arg from dw_pcie_readl_rc()/dw_pcie_writel_rc()
  PCI: Remove pcie_cap_has_devctl()
  PCI: Support PCIe Capability Slot registers only for ports with slots
  PCI: Remove PCIe Capability version checks
  PCI: Allow PCIe Capability link-related register access for switches
  PCI: Add offsets of PCIe capability registers
  PCI: Tidy bitmasks and spacing of PCIe capability definitions
  PCI: Remove obsolete comment reference to pci_pcie_cap2()
  PCI: Clarify PCI_EXP_TYPE_PCI_BRIDGE comment
  PCI: Rename PCIe capability definitions to follow convention
  PCI: Warn if unsafe MPS settings detected
  PCI: Fix MPS peer-to-peer DMA comment syntax
  PCI: Disable decoding for BAR sizing only when it was actually enabled
  PCI: Add comment about needing pci_msi_off() even when CONFIG_PCI_MSI=n
  PCI: Add pcibios_pm_ops for optional arch-specific hibernate functionality
  PCI: Don't restrict MPS for slots below Root Ports
  PCI: Simplify MPS test for Downstream Port
  PCI: Remove unnecessary check for pcie_get_mps() failure
  ...
2013-09-03 16:24:35 -07:00
Linus Torvalds 40031da445 ACPI and power management updates for 3.12-rc1
1) ACPI-based PCI hotplug (ACPIPHP) subsystem rework and introduction
     of Intel Thunderbolt support on systems that use ACPI for signalling
     Thunderbolt hotplug events.  This also should make ACPIPHP work in
     some cases in which it was known to have problems.  From
     Rafael J Wysocki, Mika Westerberg and Kirill A Shutemov.
 
  2) ACPI core code cleanups and dock station support cleanups from
     Jiang Liu and Rafael J Wysocki.
 
  3) Fixes for locking problems related to ACPI device hotplug from
     Rafael J Wysocki.
 
  4) ACPICA update to version 20130725 includig fixes, cleanups, support
     for more than 256 GPEs per GPE block and a change to make the ACPI
     PM Timer optional (we've seen systems without the PM Timer in the
     field already).  One of the fixes, related to the DeRefOf operator,
     is necessary to prevent some Windows 8 oriented AML from causing
     problems to happen.  From Bob Moore, Lv Zheng, and Jung-uk Kim.
 
  5) Removal of the old and long deprecated /proc/acpi/event interface
     and related driver changes from Thomas Renninger.
 
  6) ACPI and Xen changes to make the reduced hardware sleep work with
     the latter from Ben Guthro.
 
  7) ACPI video driver cleanups and a blacklist of systems that should
     not tell the BIOS that they are compatible with Windows 8 (or ACPI
     backlight and possibly other things will not work on them).  From
     Felipe Contreras.
 
  8) Assorted ACPI fixes and cleanups from Aaron Lu, Hanjun Guo,
     Kuppuswamy Sathyanarayanan, Lan Tianyu, Sachin Kamat, Tang Chen,
     Toshi Kani, and Wei Yongjun.
 
  9) cpufreq ondemand governor target frequency selection change to
     reduce oscillations between min and max frequencies (essentially,
     it causes the governor to choose target frequencies proportional
     to load) from Stratos Karafotis.
 
 10) cpufreq fixes allowing sysfs attributes file permissions to be
     preserved over suspend/resume cycles Srivatsa S Bhat.
 
 11) Removal of Device Tree parsing for CPU device nodes from multiple
     cpufreq drivers that required some changes related to
     of_get_cpu_node() to be made in a few architectures and in the
     driver core.  From Sudeep KarkadaNagesha.
 
 12) cpufreq core fixes and cleanups related to mutual exclusion and
     driver module references from Viresh Kumar, Lukasz Majewski and
     Rafael J Wysocki.
 
 13) Assorted cpufreq fixes and cleanups from Amit Daniel Kachhap,
     Bartlomiej Zolnierkiewicz, Hanjun Guo, Jingoo Han, Joseph Lo,
     Julia Lawall, Li Zhong, Mark Brown, Sascha Hauer, Stephen Boyd,
     Stratos Karafotis, and Viresh Kumar.
 
 14) Fixes to prevent race conditions in coupled cpuidle from happening
     from Colin Cross.
 
 15) cpuidle core fixes and cleanups from Daniel Lezcano and
     Tuukka Tikkanen.
 
 16) Assorted cpuidle fixes and cleanups from Daniel Lezcano,
     Geert Uytterhoeven, Jingoo Han, Julia Lawall, Linus Walleij,
     and Sahara.
 
 17) System sleep tracing changes from Todd E Brandt and Shuah Khan.
 
 18) PNP subsystem conversion to using struct dev_pm_ops for power
     management from Shuah Khan.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABCAAGBQJSJcKhAAoJEKhOf7ml8uNsplIQAJSOshxhkkemvFOuHZ+0YIbh
 R9aufjXeDkMDBi8YtU+tB7ERth1j+0LUSM0NTnP51U7e+7eSGobA9s5jSZQj2l7r
 HFtnSOegLuKAfqwgfSLK91xa1rTFdfW0Kych9G2nuHtBIt6P0Oc59Cb5M0oy6QXs
 nVtaDEuU//tmO71+EF5HnMJHabRTrpvtn/7NbDUpU7LZYpWJrHJFT9xt1rXNab7H
 YRCATPm3kXGRg58Doc3EZE4G3D7DLvq74jWMaI089X/m5Pg1G6upqArypOy6oxdP
 p2FEzYVrb2bi8fakXp7BBeO1gCJTAqIgAkbSSZHLpGhFaeEMmb9/DWPXdm2TjzMV
 c1EEucvsqZWoprXgy12i5Hk814xN8d8nBBLg/UYiRJ44nc/hevXfyE9ZYj6bkseJ
 +GNHmZIa1QYC05nnGli4+W4kHns8EZf/gmvIxnPuco1RN2yMWagrud5/G6Dr9M2B
 hzJV6qauLVzgZso4oe79zv9aVxe/dPHKANLD/sg23WBiJJbJF1ocBlnj2Xlbpqze
 pmMUWGiO/gUiS0fmpW/lAJauza5jFmSCjE4E8R0Gyn0j4YXjmMhdEanaU6J3VuCi
 yVgEzYEth4sowq4AflMMLKYN+WmozDnK7taZRGmT0t+EKRFKLT6EgnNrkQgs1vKl
 oawD9LM4fZ8E0yroOEme
 =CgqW
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael Wysocki:

 1) ACPI-based PCI hotplug (ACPIPHP) subsystem rework and introduction
    of Intel Thunderbolt support on systems that use ACPI for signalling
    Thunderbolt hotplug events.  This also should make ACPIPHP work in
    some cases in which it was known to have problems.  From
    Rafael J Wysocki, Mika Westerberg and Kirill A Shutemov.

 2) ACPI core code cleanups and dock station support cleanups from
    Jiang Liu and Rafael J Wysocki.

 3) Fixes for locking problems related to ACPI device hotplug from
    Rafael J Wysocki.

 4) ACPICA update to version 20130725 includig fixes, cleanups, support
    for more than 256 GPEs per GPE block and a change to make the ACPI
    PM Timer optional (we've seen systems without the PM Timer in the
    field already).  One of the fixes, related to the DeRefOf operator,
    is necessary to prevent some Windows 8 oriented AML from causing
    problems to happen.  From Bob Moore, Lv Zheng, and Jung-uk Kim.

 5) Removal of the old and long deprecated /proc/acpi/event interface
    and related driver changes from Thomas Renninger.

 6) ACPI and Xen changes to make the reduced hardware sleep work with
    the latter from Ben Guthro.

 7) ACPI video driver cleanups and a blacklist of systems that should
    not tell the BIOS that they are compatible with Windows 8 (or ACPI
    backlight and possibly other things will not work on them).  From
    Felipe Contreras.

 8) Assorted ACPI fixes and cleanups from Aaron Lu, Hanjun Guo,
    Kuppuswamy Sathyanarayanan, Lan Tianyu, Sachin Kamat, Tang Chen,
    Toshi Kani, and Wei Yongjun.

 9) cpufreq ondemand governor target frequency selection change to
    reduce oscillations between min and max frequencies (essentially,
    it causes the governor to choose target frequencies proportional
    to load) from Stratos Karafotis.

10) cpufreq fixes allowing sysfs attributes file permissions to be
    preserved over suspend/resume cycles Srivatsa S Bhat.

11) Removal of Device Tree parsing for CPU device nodes from multiple
    cpufreq drivers that required some changes related to
    of_get_cpu_node() to be made in a few architectures and in the
    driver core.  From Sudeep KarkadaNagesha.

12) cpufreq core fixes and cleanups related to mutual exclusion and
    driver module references from Viresh Kumar, Lukasz Majewski and
    Rafael J Wysocki.

13) Assorted cpufreq fixes and cleanups from Amit Daniel Kachhap,
    Bartlomiej Zolnierkiewicz, Hanjun Guo, Jingoo Han, Joseph Lo,
    Julia Lawall, Li Zhong, Mark Brown, Sascha Hauer, Stephen Boyd,
    Stratos Karafotis, and Viresh Kumar.

14) Fixes to prevent race conditions in coupled cpuidle from happening
    from Colin Cross.

15) cpuidle core fixes and cleanups from Daniel Lezcano and
    Tuukka Tikkanen.

16) Assorted cpuidle fixes and cleanups from Daniel Lezcano,
    Geert Uytterhoeven, Jingoo Han, Julia Lawall, Linus Walleij,
    and Sahara.

17) System sleep tracing changes from Todd E Brandt and Shuah Khan.

18) PNP subsystem conversion to using struct dev_pm_ops for power
    management from Shuah Khan.

* tag 'pm+acpi-3.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (217 commits)
  cpufreq: Don't use smp_processor_id() in preemptible context
  cpuidle: coupled: fix race condition between pokes and safe state
  cpuidle: coupled: abort idle if pokes are pending
  cpuidle: coupled: disable interrupts after entering safe state
  ACPI / hotplug: Remove containers synchronously
  driver core / ACPI: Avoid device hot remove locking issues
  cpufreq: governor: Fix typos in comments
  cpufreq: governors: Remove duplicate check of target freq in supported range
  cpufreq: Fix timer/workqueue corruption due to double queueing
  ACPI / EC: Add ASUSTEK L4R to quirk list in order to validate ECDT
  ACPI / thermal: Add check of "_TZD" availability and evaluating result
  cpufreq: imx6q: Fix clock enable balance
  ACPI: blacklist win8 OSI for buggy laptops
  cpufreq: tegra: fix the wrong clock name
  cpuidle: Change struct menu_device field types
  cpuidle: Add a comment warning about possible overflow
  cpuidle: Fix variable domains in get_typical_interval()
  cpuidle: Fix menu_device->intervals type
  cpuidle: CodingStyle: Break up multiple assignments on single line
  cpuidle: Check called function parameter in get_typical_interval()
  ...
2013-09-03 15:59:39 -07:00
Sebastian Ott 0ff70ec88b s390/pci: add recover sysfs knob
Add an arch specific attribute to recover a pci function from an
error state or config space blockage.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-30 08:57:12 +02:00
Sebastian Ott 67f43f38ee s390/pci/hotplug: convert to be builtin only
Convert s390' pci hotplug to be builtin only, with no module option.

Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-30 08:57:07 +02:00
Bjorn Helgaas e89c33168a Merge branch 'pci/misc' into next
* pci/misc:
  PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when available
  PCI: exynos: Add I/O access wrappers
  PCI: designware: Drop "addr" arg from dw_pcie_readl_rc()/dw_pcie_writel_rc()
2013-08-29 17:23:33 -06:00
Julia Lawall dc05ee3298 PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource
Use devm_ioremap_resource instead of devm_request_and_ioremap.

This was done using the semantic patch
scripts/coccinelle/api/devm_ioremap_resource.cocci

Error-handling code was manually removed from the associated calls to
platform_get_resource.

Adjust the comment at the third platform_get_resource_byname to make clear
why ioremap is not done at this point.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Thierry Reding <treding@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-29 13:02:16 -07:00
Seungwon Jeon 058dd016a1 PCI: exynos: Add I/O access wrappers
This patch adds wrappers for MMIO access to ELBI, PHY, and other
registers.  No functional change.

[bhelgaas: changelog]
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
2013-08-29 13:47:20 -06:00
Seungwon Jeon f7b7868ced PCI: designware: Drop "addr" arg from dw_pcie_readl_rc()/dw_pcie_writel_rc()
The "dbi_addr" argument to dw_pcie_readl_rc() and dw_pcie_writel_rc()
is redundant and misleading because we always have the "struct pcie_port"
and we always want to use the address from there.

This patch removes the argument and changes the callers to match.
No functional change.

[bhelgaas: changelog]
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
2013-08-29 13:38:12 -06:00
Bjorn Helgaas 2e8b5f621d Merge branch 'pci/misc' into next
* pci/misc:
  PCI: Remove pcie_cap_has_devctl()
  PCI: Support PCIe Capability Slot registers only for ports with slots
  PCI: Remove PCIe Capability version checks
  PCI: Allow PCIe Capability link-related register access for switches
  PCI: Add offsets of PCIe capability registers
  PCI: Tidy bitmasks and spacing of PCIe capability definitions
  PCI: Remove obsolete comment reference to pci_pcie_cap2()
  PCI: Clarify PCI_EXP_TYPE_PCI_BRIDGE comment
  PCI: Rename PCIe capability definitions to follow convention
  PCI: Disable decoding for BAR sizing only when it was actually enabled
  PCI: Add comment about needing pci_msi_off() even when CONFIG_PCI_MSI=n
  PCI: Add pcibios_pm_ops for optional arch-specific hibernate functionality
2013-08-28 20:55:41 -06:00
Bjorn Helgaas fed2451512 PCI: Remove pcie_cap_has_devctl()
pcie_cap_has_devctl() does nothing, so remove it.  Simplicity over
consistency in this case.  No functional change.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-By: Jiang Liu <jiang.liu@huawei.com>
2013-08-28 20:51:39 -06:00
Bjorn Helgaas 6d3a1741f1 PCI: Support PCIe Capability Slot registers only for ports with slots
Previously we allowed callers to access Slot Capabilities, Status, and
Control for Root Ports even if the Root Port did not implement a slot.
This seems dubious because the spec only requires these registers if a
slot is implemented.

It's true that even Root Ports without slots must have *space* for these
slot registers, because the Root Capabilities, Status, and Control
registers are after the slot registers in the capability.  However,
for a v1 PCIe Capability, the *semantics* of the slot registers are
undefined unless a slot is implemented.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-By: Jiang Liu <jiang.liu@huawei.com>
2013-08-28 20:51:39 -06:00
Bjorn Helgaas c8b303d020 PCI: Remove PCIe Capability version checks
Previously we relied on the PCIe r3.0, sec 7.8, spec language that says
"For Functions that do not implement the [Link, Slot, Root] registers,
these spaces must be hardwired to 0b," which means that for v2 PCIe
capabilities, we don't need to check the device type at all.

But it's simpler if we don't need to check the capability version at all,
and I think the spec is explicit enough about which registers are required
for which types that we can remove the version checks.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-By: Jiang Liu <jiang.liu@huawei.com>
2013-08-28 20:51:39 -06:00
Bjorn Helgaas d3694d4fa3 PCI: Allow PCIe Capability link-related register access for switches
Every PCIe device has a link, except Root Complex Integrated Endpoints
and Root Complex Event Collectors.  Previously we didn't give access
to PCIe capability link-related registers for Upstream Ports, Downstream
Ports, and Bridges, so attempts to read PCI_EXP_LNKCTL incorrectly
returned zero.  See PCIe spec r3.0, sec 7.8 and 1.3.2.3.

Reference: http://lkml.kernel.org/r/979A8436335E3744ADCD3A9F2A2B68A52AD136BE@SJEXCHMB10.corp.ad.broadcom.com
Reported-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-By: Jiang Liu <jiang.liu@huawei.com>
2013-08-28 11:28:22 -06:00
Bjorn Helgaas d2ab1fa68c PCI: Rename PCIe capability definitions to follow convention
All other PCIe capability register fields include "PCI_EXP" + <reg-name> +
<field-name>.  This renames PCI_EXP_OBFF_MASK, PCI_EXP_IDO_REQ_EN,
PCI_EXP_LTR_EN, and related fields using the same convention.
No functional change.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>	# for MFD driver
2013-08-27 12:50:13 -06:00
Rafael J. Wysocki 0c581415b5 Merge branch 'acpi-assorted'
* acpi-assorted:
  ACPI / osl: Kill macro INVALID_TABLE().
  earlycpio.c: Fix the confusing comment of find_cpio_data().
  ACPI / x86: Print Hot-Pluggable Field in SRAT.
  ACPI / thermal: Use THERMAL_TRIPS_NONE macro to replace number
  ACPI / thermal: Remove unused macros in the driver/acpi/thermal.c
  ACPI / thermal: Remove the unused lock of struct acpi_thermal
  ACPI / osl: Fix osi_setup_entries[] __initdata attribute location
  ACPI / numa: Fix __init attribute location in slit_valid()
  ACPI / dock: Fix __init attribute location in find_dock_and_bay()
  ACPI / Sleep: Fix incorrect placement of __initdata
  ACPI / processor: Fix incorrect placement of __initdata
  ACPI / EC: Fix incorrect placement of __initdata
  ACPI / scan: Drop unnecessary label from acpi_create_platform_device()
  ACPI: Move acpi_bus_get_device() from bus.c to scan.c
  ACPI / scan: Allow platform device creation without any IO resources
  ACPI: Cleanup sparse warning on acpi_os_initialize1()
  platform / thinkpad: Remove deprecated hotkey_report_mode parameter
  ACPI: Remove the old /proc/acpi/event interface
2013-08-27 01:29:04 +02:00
Rafael J. Wysocki abe5430e9d Merge branch 'acpi-pci-hotplug'
* acpi-pci-hotplug: (34 commits)
  ACPI / PM: Hold acpi_scan_lock over system PM transitions
  ACPI / hotplug / PCI: Fix NULL pointer dereference in cleanup_bridge()
  PCI / ACPI: Use dev_dbg() instead of dev_info() in acpi_pci_set_power_state()
  ACPI / hotplug / PCI: Get rid of check_sub_bridges()
  ACPI / hotplug / PCI: Clean up bridge_mutex usage
  ACPI / hotplug / PCI: Redefine enable_device() and disable_device()
  ACPI / hotplug / PCI: Sanitize acpiphp_get_(latch)|(adapter)_status()
  ACPI / hotplug / PCI: Get rid of unused constants in acpiphp.h
  ACPI / hotplug / PCI: Check for new devices on enabled slots
  ACPI / hotplug / PCI: Allow slots without new devices to be rescanned
  ACPI / hotplug / PCI: Do not check SLOT_ENABLED in enable_device()
  ACPI / hotplug / PCI: Do not exectute _PS0 and _PS3 directly
  ACPI / hotplug / PCI: Do not queue up event handling work items in vain
  ACPI / hotplug / PCI: Consolidate slot disabling and ejecting
  ACPI / hotplug / PCI: Drop redundant checks from check_hotplug_bridge()
  ACPI / hotplug / PCI: Rework namespace scanning and trimming routines
  ACPI / hotplug / PCI: Store parent in functions and bus in slots
  ACPI / hotplug / PCI: Drop handle field from struct acpiphp_bridge
  ACPI / hotplug / PCI: Drop handle field from struct acpiphp_func
  ACPI / hotplug / PCI: Embed function struct into struct acpiphp_context
  ...
2013-08-27 01:26:37 +02:00
Rafael J. Wysocki c92f56cbdf Merge branch 'acpi-cleanup'
* acpi-cleanup: (21 commits)
  ACPI / dock: fix error return code in dock_add()
  ACPI / dock: Drop unnecessary local variable from dock_add()
  ACPI / dock / PCI: Drop ACPI dock notifier chain
  ACPI / dock: Do not check CONFIG_ACPI_DOCK_MODULE
  ACPI / dock: Do not leak memory on falilures to add a dock station
  ACPI: Drop ACPI bus notifier call chain
  ACPI / dock: Rework the handling of notifications
  ACPI / dock: Simplify dock_init_hotplug() and dock_release_hotplug()
  ACPI / dock: Walk list in reverse order during removal of devices
  ACPI / dock: Rework and simplify find_dock_devices()
  ACPI / dock: Drop the hp_lock mutex from struct dock_station
  ACPI: simplify acpiphp driver with new helper functions
  ACPI: simplify dock driver with new helper functions
  ACPI: Export acpi_(bay)|(dock)_match() from scan.c
  ACPI: introduce two helper functions for _EJ0 and _LCK
  ACPI: introduce helper function acpi_execute_simple_method()
  ACPI: introduce helper function acpi_has_method()
  ACPI / dock: simplify dock_create_acpi_device()
  ACPI / dock: mark initialization functions with __init
  ACPI / dock: drop redundant spin lock in dock station object
  ...
2013-08-27 01:25:28 +02:00
Bjorn Helgaas 07f2daad09 Merge branch 'pci/yijing-mps-v8' into next
* pci/yijing-mps-v8:
  PCI: Warn if unsafe MPS settings detected
  PCI: Fix MPS peer-to-peer DMA comment syntax
  PCI: Don't restrict MPS for slots below Root Ports
  PCI: Simplify MPS test for Downstream Port
  PCI: Remove unnecessary check for pcie_get_mps() failure
  PCI: Simplify pcie_bus_configure_settings() interface
  PCI: Drop "PCI-E" prefix from Max Payload Size message
2013-08-26 15:40:34 -06:00
Bjorn Helgaas 1193725f54 Merge branch 'pci/yinghai-assign-unassigned-v6' into next
* pci/yinghai-assign-unassigned-v6:
  PCI: Assign resources for hot-added host bridge more aggressively
  PCI: Move resource reallocation code to non-__init
  PCI: Delay enabling bridges until they're needed
  PCI: Assign resources on a per-bus basis
  PCI: Enable unassigned resource reallocation on per-bus basis
  PCI: Turn on reallocation for unassigned resources with host bridge offset
  PCI: Look for unassigned resources on per-bus basis
  PCI: Drop temporary variable in pci_assign_unassigned_resources()
2013-08-26 15:40:03 -06:00
Yijing Wang 5895af7915 PCI: Warn if unsafe MPS settings detected
If a BIOS configures MPS incorrectly, devices may not work normally.
For example, if a bridge has MPS set larger than an endpoint below it,
the endpoint may discard packets.

To help diagnose this issue, print a warning if we find an endpoint
MPS setting different than that of the upstream bridge.

[bhelgaas: changelog, "bridge" temporary, warning text]
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=60799
Reported-by: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jon Mason <jdmason@kudzu.us>
2013-08-26 14:49:28 -06:00
Jon Mason 3315472c47 PCI: Fix MPS peer-to-peer DMA comment syntax
Correct minor wording issue in MPS peer-to-peer comment.  Noticed by Don
Dutile.

Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-08-26 11:21:44 -06:00
Zoltan Kiss 808e34e2cd PCI: Disable decoding for BAR sizing only when it was actually enabled
We disable BARs while sizing them so we don't cause conflicts with other
devices (see 253d2e5498 and bbffe43524).  But if device decoding is already
disabled before we size the BAR, we don't need to disable it again.

[bhelgaas: changelog, add PCI_COMMAND_DECODING_ENABLE for readability]
Signed-off-by: Zoltan Kiss <zoltan.kiss@citrix.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-08-23 09:21:19 -06:00
Bjorn Helgaas da27f4b3ec PCI: Add comment about needing pci_msi_off() even when CONFIG_PCI_MSI=n
Per f5f2b13129 ("msi: sanely support hardware level msi disabling"), we
want pci_msi_off() to work even if MSI support is not compiled into the
kernel, and there are existing callers that use it when CONFIG_PCI_MSI=n.
This adds a comment to that effect.

No functional change.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-08-22 14:45:21 -06:00
Sebastian Ott 699c198558 PCI: Add pcibios_pm_ops for optional arch-specific hibernate functionality
Platforms may want to provide architecture-specific functionality when
a PCI device is doing a hibernate transition.  Add a weak symbol
pcibios_pm_ops that architectures can override to do so.

[bhelgaas: fold in return value checks from v2 patch]
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-08-22 14:11:32 -06:00
Yijing Wang d4aa68f614 PCI: Don't restrict MPS for slots below Root Ports
When booting with "pci=pcie_bus_safe", we previously limited the
fabric MPS to 128 when we found:

  (1) A hotplug-capable Downstream Port ("dev->is_hotplug_bridge &&
      pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT"), or

  (2) A hotplug-capable Root Port with a slot that was either empty or
      contained a multi-function device ("dev->is_hotplug_bridge &&
      !list_is_singular(&dev->bus->devices)")

Part (1) is valid, but part (2) is not.

After a hot-add in the slot below a Root Port, we can reconfigure all
MPS values in the fabric below the Root Port because the new device is
the only thing below the Root Port and there are no active drivers.
Therefore, there's no reason to limit the MPS for Root Ports, no
matter what's in the slot.

Test info:

    -+-[0000:40]-+-07.0-[0000:46]--+-00.0  Intel 82576 NIC
                                   \-00.1  Intel 82576 NIC

    0000:40:07.0 Root Port bridge to [bus 46] (MPS supported=256)
    0000:46:00.0 Endpoint                     (MPS supported=512)
    0000:46:00.1 Endpoint                     (MPS supported=512)

    # echo 0 > /sys/bus/pci/slots/7/power
    # echo 1 > /sys/bus/pci/slots/7/power
    pcieport 0000:40:07.0: PCI-E Max Payload Size set to 256/ 256 (was 256)
    pci 0000:46:00.0:      PCI-E Max Payload Size set to 256/ 512 (was 128)
    pci 0000:46:00.1:      PCI-E Max Payload Size set to 256/ 512 (was 128)

Before this change, we set MPS to 128 for the Root Port and both NICs
because the slot contained a multi-function device and

    dev->is_hotplug_bridge && !list_is_singular(&dev->bus->devices)

was true.  After this change, we set it to 256.

[bhelgaas: changelog, comments, split out upstream bridge check]
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jon Mason <jdmason@kudzu.us>
2013-08-22 10:47:04 -06:00
Bjorn Helgaas c2996948ac PCI: Simplify MPS test for Downstream Port
PCIe hotplug bridges are always either Root Ports or Downstream Ports.  No
other device type can have a PCIe link leading downstream to a slot.

Root Ports don't have an upstream bridge, so "dev->is_hotplug_bridge &&
dev->bus->self" is true if and only if "dev" is a Downstream Port.  That
means we can simplify this by looking at the type of "dev" itself, without
looking upstream at all.

No functional change.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-08-22 10:47:04 -06:00
Yijing Wang f67577118d PCI: Remove unnecessary check for pcie_get_mps() failure
After 59875ae489 ("PCI/core: Use PCI Express Capability accessors"),
pcie_get_mps() never returns an error, so don't bother to check for it.

No functional change.

[bhelgaas: changelog, fix pcie_get_mps() doc]
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-08-22 10:47:03 -06:00
Bjorn Helgaas a58674ff83 PCI: Simplify pcie_bus_configure_settings() interface
Based on a patch by Jon Mason (see URL below).

All users of pcie_bus_configure_settings() pass arguments of the form
"bus, bus->self->pcie_mpss".  The "mpss" argument is redundant since we
can easily look it up internally.  In addition, all callers check
"bus->self" for NULL, which we can also do internally.

This patch simplifies the interface and the callers.  No functional change.

Reference: http://lkml.kernel.org/r/1317048850-30728-2-git-send-email-mason@myri.com
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-08-22 10:47:02 -06:00
Bjorn Helgaas 2c25e34c75 PCI: Drop "PCI-E" prefix from Max Payload Size message
The conventional spelling is "PCIe", but I think even that is superfluous,
so remove the whole thing.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-08-22 10:47:01 -06:00
Kevin Hilman bfa664f21b ARM: tegra: core SoC enhancements for 3.12
This branch includes a number of enhancements to core SoC support for
 Tegra devices. The major new features are:
 
 * Adds a new CPU-power-gated cpuidle state for Tegra114.
 * Adds initial system suspend support for Tegra114, initially supporting
   just CPU-power-gating during suspend.
 * Adds "LP1" suspend mode support for all of Tegra20/30/114. This mode
   both gates CPU power, and places the DRAM into self-refresh mode.
 * A new DT-driven PCIe driver to Tegra20/30. The driver is also moved
   from arch/arm/mach-tegra/ to drivers/pci/host/.
 
 The PCIe driver work depends on the following tag from Thomas Petazzoni:
 git://git.infradead.org/linux-mvebu.git mis-3.12.2
 ... which is merged into the middle of this pull request.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSDlwwAAoJEMzrak5tbycxR68QAJZ/Izc9Izj0JH8hmCEvMNfi
 ub1DQfWAy3oXk0ttkk+BMvuyD8JTvBr8LSK8GqjZs//rFGlW81A4NHTvCwoKZjKe
 hgrRgI2B1wj3Um1sp8le9D0klKrTcfmpXrOxH8ALgz0BIpMge8AGZHkV0SrfQa1z
 bKiISFVAw12WJCVrQ2nbzpZGU51lbyJ/+RghttM1a8LuS2P03CZgt2kqiytk3UVK
 uiGEy3sCkjXLFO3EsUvM6ha623S6BumCAYjNfgDowTVKaoEe1r2TD4bFeU6lGcXJ
 mlVTv0Kywazf4Q2gKzkbDz8UQMArW4hok2iILHzz+sf/Rn0hie5XVqhFlbBlcae8
 vyWsHmqvmE9BJAK2G2RLs9cJCTzEpEyAjUWfE3sIIa3ztSguT5+PHndDLR/d76aS
 j8L3FYReICZ1NuNw1JSQPFs9g2EWJbNRiy+8o9O2elsJMpLDBj/FcV6TVpudbBTI
 z7hvN+XSVYUaCVD4e8ma9YoC3VGseiAZvd+Y8hPd2MFBECVPNpy2bOacieU6Bgxh
 zjSBXZ/URxN3rTkv9+F3BLWAOfVmJYN0rKV9YfM/rqpWjc9iQx30m1fRZDnXWhvd
 ps8eFIYsKqc6v9AAugl/RexFy4Laav9eREjb0k2LA8ClLhK/qLLuiisVmKWS/grh
 lX9tzPEG2nZcjxSYaEjz
 =ve9i
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-3.12-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/soc

From: Stephen Warren:
ARM: tegra: core SoC enhancements for 3.12

This branch includes a number of enhancements to core SoC support for
Tegra devices. The major new features are:

* Adds a new CPU-power-gated cpuidle state for Tegra114.
* Adds initial system suspend support for Tegra114, initially supporting
  just CPU-power-gating during suspend.
* Adds "LP1" suspend mode support for all of Tegra20/30/114. This mode
  both gates CPU power, and places the DRAM into self-refresh mode.
* A new DT-driven PCIe driver to Tegra20/30. The driver is also moved
  from arch/arm/mach-tegra/ to drivers/pci/host/.

The PCIe driver work depends on the following tag from Thomas Petazzoni:
git://git.infradead.org/linux-mvebu.git mis-3.12.2
... which is merged into the middle of this pull request.

* tag 'tegra-for-3.12-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: (33 commits)
  ARM: tegra: disable LP2 cpuidle state if PCIe is enabled
  MAINTAINERS: Add myself as Tegra PCIe maintainer
  PCI: tegra: set up PADS_REFCLK_CFG1
  PCI: tegra: Add Tegra 30 PCIe support
  PCI: tegra: Move PCIe driver to drivers/pci/host
  PCI: msi: add default MSI operations for !HAVE_GENERIC_HARDIRQS platforms
  ARM: tegra: add LP1 suspend support for Tegra114
  ARM: tegra: add LP1 suspend support for Tegra20
  ARM: tegra: add LP1 suspend support for Tegra30
  ARM: tegra: add common LP1 suspend support
  clk: tegra114: add LP1 suspend/resume support
  ARM: tegra: config the polarity of the request of sys clock
  ARM: tegra: add common resume handling code for LP1 resuming
  ARM: pci: add ->add_bus() and ->remove_bus() hooks to hw_pci
  of: pci: add registry of MSI chips
  PCI: Introduce new MSI chip infrastructure
  PCI: remove ARCH_SUPPORTS_MSI kconfig option
  PCI: use weak functions for MSI arch-specific functions
  ARM: tegra: unify Tegra's Kconfig a bit more
  ARM: tegra: remove the limitation that Tegra114 can't support suspend
  ...

Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-08-21 10:17:18 -07:00
Kevin Hilman 5515d9981f Minimal DRA7xx based SoC core support via Rajendra Nayak <rnayak@ti.com>
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJSDcbOAAoJEBvUPslcq6VzeGAQAI040uoCSQ7C5w2o/0+Kuo3n
 sftR1NyXDnMIHMO+B/SVZF+vayQxtnygq1Nk07BQjl9o9MgPBdY4/Ded4xAvuMQq
 zM0dke8xm5+/QCqtH/6vlJnZGo4yzvwtMXNix2r50Ld+f3Vt7yyl4K9z54jWk1cl
 qrPoG2HbhzDH7qbDnygxvyPCdbHh0J1FD2vdBY6/Hj1j/F/Wn0InGvkywauBckVb
 XZm8UIpdJ8qSSQEqtdBrZzJ84XOElC5iDAgrO0lISqxnt1cmD9bkEByJEK09IJAC
 7EkMqgtd1l4fVKPkM8THXkvUcRAp8vz/6H7pc0n48Ew6QTtaQOkSTLy1f8+AVBwq
 50cJwARrtWoIlji1Ur6H6G1rvqUzp1xw9qrIJPZNsEGAlROS7xNCOKurKnMRDd15
 tiO2uPRN44E+6m6ChfdrtfiZCoV47bXXGI2O7L2qGImw8mr7FcbLdYzweMIWN13d
 5dNXMyzw6H/X6qzNSHEv/4tY16YIUxS+01cPxmHbyXUJrizptRYupUIGGhu3EbVH
 DVZPn+Lm0HFEiiAeFH+jLvegxxx+gRK0b70O+tOqRwkQ08mMIq/6YAy7tggQH8BI
 wVZe6ADwg/mo4rb9Bv+z7R+ECNR6XBTH440++BJPBN8GW7IW/jjsTyKL61b25pKR
 JQM7CZ2YprQTDz7Z6kPY
 =BR17
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v3.12/dra7xx' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

From Tony Lindgren:
Minimal DRA7xx based SoC core support via Rajendra Nayak <rnayak@ti.com>

* tag 'omap-for-v3.12/dra7xx' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (849 commits)
  ARM: DRA7: Add the build support in omap2plus
  ARM: DRA7: hwmod: Reuse the soc_ops used for OMAP4/5
  ARM: DRA7: id: Add cpu detection support for DRA7xx based SoCs'
  ARM: DRA7: Kconfig: Make ARCH_NR_GPIO default to 512
  ARM: DRA7: board-generic: Add basic DT support
  ARM: DRA7: Resue the clocksource, clockevent support
  ARM: DRA7: Reuse io tables and add a new .init_early
  ARM: DRA7: Reuse all of PRCM and MPUSS SMP infra
  Linux 3.11-rc5
  btrfs: don't loop on large offsets in readdir
  Btrfs: check to see if root_list is empty before adding it to dead roots
  Btrfs: release both paths before logging dir/changed extents
  Btrfs: allow splitting of hole em's when dropping extent cache
  Btrfs: make sure the backref walker catches all refs to our extent
  Btrfs: fix backref walking when we hit a compressed extent
  Btrfs: do not offset physical if we're compressed
  Btrfs: fix extent buffer leak after backref walking
  Btrfs: fix a bug of snapshot-aware defrag to make it work on partial extents
  btrfs: fix file truncation if FALLOC_FL_KEEP_SIZE is specified
  dlm: kill the unnecessary and wrong device_close()->recalc_sigpending()
  ...

Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-08-19 10:22:31 -07:00
Rafael J. Wysocki 1aaac07112 ACPI / hotplug / PCI: Fix NULL pointer dereference in cleanup_bridge()
After commit bbd34fc (ACPI / hotplug / PCI: Register all devices
under the given bridge) register_slot() is called for all PCI
devices under a given bridge that have corresponding objects in
the ACPI namespace, but it calls acpiphp_register_hotplug_slot()
only for devices satisfying specific criteria.  Still,
cleanup_bridge() calls acpiphp_unregister_hotplug_slot() for all
objects created by register_slot(), although it should only call it
for the ones that acpiphp_register_hotplug_slot() has been called
for (successfully).  This causes a NULL pointer to be dereferenced
by the acpiphp_unregister_hotplug_slot() executed by cleanup_bridge()
if the object it is called for has not been passed to
acpiphp_register_hotplug_slot().

To fix this problem, check if the 'slot' field of the object passed
to acpiphp_unregister_hotplug_slot() in cleanup_bridge() is not NULL,
which only is the case if acpiphp_register_hotplug_slot() has been
executed for that object.  In addition to that, make register_slot()
reset the 'slot' field to NULL if acpiphp_register_hotplug_slot() has
failed for the given object to prevent stale pointers from being
used by acpiphp_unregister_hotplug_slot().

Reported-and-tested-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-17 22:16:33 +02:00
David S. Miller 2ff1cf12c9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2013-08-16 15:37:26 -07:00
Bjorn Helgaas 7d8c4a2c5a Merge branch 'pci/aw-reset-v5' into next
* pci/aw-reset-v5:
  PCI: Add pci_probe_reset_slot() and pci_probe_reset_bus()
  PCI: Remove aer_do_secondary_bus_reset()
  PCI: Tune secondary bus reset timing
  PCI: Wake-up devices before saving config space for reset
  PCI: Add pci_reset_slot() and pci_reset_bus()
  PCI: Split out pci_dev lock/unlock and save/restore
  PCI: Add slot reset option to pci_dev_reset()
  PCI: pciehp: Add reset_slot() method
  PCI: Add hotplug_slot_ops.reset_slot()
  PCI: Add pci_reset_bridge_secondary_bus()
2013-08-15 14:41:33 -06:00
Alex Williamson 9a3d2b9bee PCI: Add pci_probe_reset_slot() and pci_probe_reset_bus()
Users of pci_reset_bus() and pci_reset_slot() need a way to probe
whether the bus or slot supports reset.  Add trivial helper functions
and export them as vfio-pci will make use of these.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-08-15 11:38:45 -06:00
Alex Williamson 1b95ce8fc9 PCI: Remove aer_do_secondary_bus_reset()
One PCI bus reset function to rule them all.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-08-14 15:25:59 -06:00
Alex Williamson de0c548c33 PCI: Tune secondary bus reset timing
The PCI spec indicates that with stable power, reset needs to be
asserted for a minimum of 1ms (Trst).  We should be able to assume
stable power for a Hot Reset, but we add another millisecond as
a fudge factor to make sure the reset is seen on the bus for at least
a full 1ms.

After reset is de-asserted we must wait for devices to complete
initialization.  The specs refer to this as "recovery time" (Trhfa).
For PCI this is 2^25 clock cycles or 2^26 for PCI-X.  For minimum
bus speeds, both of those come to 1s.  PCIe "softens" this
requirement with the Configuration Request Retry Status (CRS)
completion status.  Theoretically we could use CRS to shorten the
wait time.  We don't make use of that here, using a fixed 1s delay
to allow devices to re-initialize.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-08-14 15:25:17 -06:00
Alex Williamson a6cbaadea0 PCI: Wake-up devices before saving config space for reset
Devices come out of reset in D0.  Restoring a device to a different
post-reset state takes more smarts than our simple config space
restore, which can leave devices in an inconsistent state.  For
example, if a device is reset in D3, but the restore doesn't
successfully return the device to D3, then the actual state of the
device and dev->current_state are contradictory.  Put everything
in D0 going into the reset, then we don't need to do anything
special on the way out.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-08-14 15:24:41 -06:00
Rafael J. Wysocki f3ce717e60 Merge back earlier 'acpi-assorted' material 2013-08-14 23:22:45 +02:00