Don't store the SIRTP request bit in the register state. It will
otherwise become sticky and could request an Interrupt Remap Table
Pointer update on each command register write.
Found while starting to emulate IR in QEMU, not by observing problems on
real hardware.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When multiple devices are detached in __detach_device, they
are also removed from the domains dev_list. This makes it
unsafe to use list_for_each_entry_safe, as the next pointer
might also not be in the list anymore after __detach_device
returns. So just repeatedly remove the first element of the
list until it is empty.
Cc: stable@vger.kernel.org
Tested-by: Marti Raudsepp <marti@juffo.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When the BUS_NOTIFY_DEL_DEVICE event is received the device
might still be attached to a driver. In this case the domain
can't be released as the mappings might still be in use.
Defer the domain removal in this case until we receivce the
BUS_NOTIFY_UNBOUND_DRIVER event.
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: stable@vger.kernel.org # v3.15, v3.16
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This merge window brings a good size of cleanups on various
platforms. Among the bigger ones:
* Removal of Samsung s5pc100 and s5p64xx platforms. Both of these have
lacked active support for quite a while, and after asking around nobody
showed interest in keeping them around. If needed, they could be
resurrected in the future but it's more likely that we would prefer
reintroduction of them as DT and multiplatform-enabled platforms
instead.
* OMAP4 controller code register define diet. They defined a lot of registers
that were never actually used, etc.
* Move of some of the Tegra platform code (PMC, APBIO, fuse, powergate)
to drivers/soc so it can be shared with 64-bit code. This also converts them
over to traditional driver models where possible.
* Removal of legacy gpio-samsung driver, since the last users have been
removed (moved to pinctrl)
Plus a bunch of smaller changes for various platforms that sort of
dissapear in the diffstat for the above. clps711x cleanups, shmobile
header file refactoring/moves for multiplatform friendliness, some misc
cleanups, etc.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=gbcE
-----END PGP SIGNATURE-----
Merge tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Olof Johansson:
"This merge window brings a good size of cleanups on various platforms.
Among the bigger ones:
- Removal of Samsung s5pc100 and s5p64xx platforms. Both of these
have lacked active support for quite a while, and after asking
around nobody showed interest in keeping them around. If needed,
they could be resurrected in the future but it's more likely that
we would prefer reintroduction of them as DT and
multiplatform-enabled platforms instead.
- OMAP4 controller code register define diet. They defined a lot of
registers that were never actually used, etc.
- Move of some of the Tegra platform code (PMC, APBIO, fuse,
powergate) to drivers/soc so it can be shared with 64-bit code.
This also converts them over to traditional driver models where
possible.
- Removal of legacy gpio-samsung driver, since the last users have
been removed (moved to pinctrl)
Plus a bunch of smaller changes for various platforms that sort of
dissapear in the diffstat for the above. clps711x cleanups, shmobile
header file refactoring/moves for multiplatform friendliness, some
misc cleanups, etc"
* tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (117 commits)
drivers: CCI: Correct use of ! and &
video: clcd-versatile: Depend on ARM
video: fix up versatile CLCD helper move
MAINTAINERS: Add sdhci-st file to ARCH/STI architecture
ARM: EXYNOS: Fix build breakge with PM_SLEEP=n
MAINTAINERS: Remove Kirkwood
ARM: tegra: Convert PMC to a driver
soc/tegra: fuse: Set up in early initcall
ARM: tegra: Always lock the CPU reset vector
ARM: tegra: Setup CPU hotplug in a pure initcall
soc/tegra: Implement runtime check for Tegra SoCs
soc/tegra: fuse: fix dummy functions
soc/tegra: fuse: move APB DMA into Tegra20 fuse driver
soc/tegra: Add efuse and apbmisc bindings
soc/tegra: Add efuse driver for Tegra
ARM: tegra: move fuse exports to soc/tegra/fuse.h
ARM: tegra: export apb dma readl/writel
ARM: tegra: Use a function to get the chip ID
ARM: tegra: Sort includes alphabetically
ARM: tegra: Move includes to include/soc/tegra
...
- ACPICA update to upstream version 20140724. That includes
ACPI 5.1 material (support for the _CCA and _DSD predefined names,
changes related to the DMAR and PCCT tables and ARM support among
other things) and cleanups related to using ACPICA's header files.
A major part of it is related to acpidump and the core code used
by that utility. Changes from Bob Moore, David E Box, Lv Zheng,
Sascha Wildner, Tomasz Nowicki, Hanjun Guo.
- Radix trees for memory bitmaps used by the hibernation core from
Joerg Roedel.
- Support for waking up the system from suspend-to-idle (also known
as the "freeze" sleep state) using ACPI-based PCI wakeup signaling
(Rafael J Wysocki).
- Fixes for issues related to ACPI button events (Rafael J Wysocki).
- New device ID for an ACPI-enumerated device included into the
Wildcat Point PCH from Jie Yang.
- ACPI video updates related to backlight handling from Hans de Goede
and Linus Torvalds.
- Preliminary changes needed to support ACPI on ARM from Hanjun Guo
and Graeme Gregory.
- ACPI PNP core cleanups from Arjun Sreedharan and Zhang Rui.
- Cleanups related to ACPI_COMPANION() and ACPI_HANDLE() macros
(Rafael J Wysocki).
- ACPI-based device hotplug cleanups from Wei Yongjun and
Rafael J Wysocki.
- Cleanups and improvements related to system suspend from
Lan Tianyu, Randy Dunlap and Rafael J Wysocki.
- ACPI battery cleanup from Wei Yongjun.
- cpufreq core fixes from Viresh Kumar.
- Elimination of a deadband effect from the cpufreq ondemand
governor and intel_pstate driver cleanups from Stratos Karafotis.
- 350MHz CPU support for the powernow-k6 cpufreq driver from
Mikulas Patocka.
- Fix for the imx6 cpufreq driver from Anson Huang.
- cpuidle core and governor cleanups from Daniel Lezcano,
Sandeep Tripathy and Mohammad Merajul Islam Molla.
- Build fix for the big_little cpuidle driver from Sachin Kamat.
- Configuration fix for the Operation Performance Points (OPP)
framework from Mark Brown.
- APM cleanup from Jean Delvare.
- cpupower utility fixes and cleanups from Peter Senna Tschudin,
Andrey Utkin, Himangi Saraogi, Rickard Strandqvist, Thomas Renninger.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=ZODv
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael Wysocki:
"Again, ACPICA leads the pack (47 commits), followed by cpufreq (18
commits) and system suspend/hibernation (9 commits).
From the new code perspective, the ACPICA update brings ACPI 5.1 to
the table, including a new device configuration object called _DSD
(Device Specific Data) that will hopefully help us to operate device
properties like Device Trees do (at least to some extent) and changes
related to supporting ACPI on ARM.
Apart from that we have hibernation changes making it use radix trees
to store memory bitmaps which should speed up some operations carried
out by it quite significantly. We also have some power management
changes related to suspend-to-idle (the "freeze" sleep state) support
and more preliminary changes needed to support ACPI on ARM (outside of
ACPICA).
The rest is fixes and cleanups pretty much everywhere.
Specifics:
- ACPICA update to upstream version 20140724. That includes ACPI 5.1
material (support for the _CCA and _DSD predefined names, changes
related to the DMAR and PCCT tables and ARM support among other
things) and cleanups related to using ACPICA's header files. A
major part of it is related to acpidump and the core code used by
that utility. Changes from Bob Moore, David E Box, Lv Zheng,
Sascha Wildner, Tomasz Nowicki, Hanjun Guo.
- Radix trees for memory bitmaps used by the hibernation core from
Joerg Roedel.
- Support for waking up the system from suspend-to-idle (also known
as the "freeze" sleep state) using ACPI-based PCI wakeup signaling
(Rafael J Wysocki).
- Fixes for issues related to ACPI button events (Rafael J Wysocki).
- New device ID for an ACPI-enumerated device included into the
Wildcat Point PCH from Jie Yang.
- ACPI video updates related to backlight handling from Hans de Goede
and Linus Torvalds.
- Preliminary changes needed to support ACPI on ARM from Hanjun Guo
and Graeme Gregory.
- ACPI PNP core cleanups from Arjun Sreedharan and Zhang Rui.
- Cleanups related to ACPI_COMPANION() and ACPI_HANDLE() macros
(Rafael J Wysocki).
- ACPI-based device hotplug cleanups from Wei Yongjun and Rafael J
Wysocki.
- Cleanups and improvements related to system suspend from Lan
Tianyu, Randy Dunlap and Rafael J Wysocki.
- ACPI battery cleanup from Wei Yongjun.
- cpufreq core fixes from Viresh Kumar.
- Elimination of a deadband effect from the cpufreq ondemand governor
and intel_pstate driver cleanups from Stratos Karafotis.
- 350MHz CPU support for the powernow-k6 cpufreq driver from Mikulas
Patocka.
- Fix for the imx6 cpufreq driver from Anson Huang.
- cpuidle core and governor cleanups from Daniel Lezcano, Sandeep
Tripathy and Mohammad Merajul Islam Molla.
- Build fix for the big_little cpuidle driver from Sachin Kamat.
- Configuration fix for the Operation Performance Points (OPP)
framework from Mark Brown.
- APM cleanup from Jean Delvare.
- cpupower utility fixes and cleanups from Peter Senna Tschudin,
Andrey Utkin, Himangi Saraogi, Rickard Strandqvist, Thomas
Renninger"
* tag 'pm+acpi-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (118 commits)
ACPI / LPSS: add LPSS device for Wildcat Point PCH
ACPI / PNP: Replace faulty is_hex_digit() by isxdigit()
ACPICA: Update version to 20140724.
ACPICA: ACPI 5.1: Update for PCCT table changes.
ACPICA/ARM: ACPI 5.1: Update for GTDT table changes.
ACPICA/ARM: ACPI 5.1: Update for MADT changes.
ACPICA/ARM: ACPI 5.1: Update for FADT changes.
ACPICA: ACPI 5.1: Support for the _CCA predifined name.
ACPICA: ACPI 5.1: New notify value for System Affinity Update.
ACPICA: ACPI 5.1: Support for the _DSD predefined name.
ACPICA: Debug object: Add current value of Timer() to debug line prefix.
ACPICA: acpihelp: Add UUID support, restructure some existing files.
ACPICA: Utilities: Fix local printf issue.
ACPICA: Tables: Update for DMAR table changes.
ACPICA: Remove some extraneous printf arguments.
ACPICA: Update for comments/formatting. No functional changes.
ACPICA: Disassembler: Add support for the ToUUID opererator (macro).
ACPICA: Remove a redundant cast to acpi_size for ACPI_OFFSET() macro.
ACPICA: Work around an ancient GCC bug.
ACPI / processor: Make it possible to get local x2apic id via _MAT
...
* acpica:
ACPICA: Update version to 20140724.
ACPICA: ACPI 5.1: Update for PCCT table changes.
ACPICA/ARM: ACPI 5.1: Update for GTDT table changes.
ACPICA/ARM: ACPI 5.1: Update for MADT changes.
ACPICA/ARM: ACPI 5.1: Update for FADT changes.
ACPICA: ACPI 5.1: Support for the _CCA predifined name.
ACPICA: ACPI 5.1: New notify value for System Affinity Update.
ACPICA: ACPI 5.1: Support for the _DSD predefined name.
ACPICA: Debug object: Add current value of Timer() to debug line prefix.
ACPICA: acpihelp: Add UUID support, restructure some existing files.
ACPICA: Utilities: Fix local printf issue.
ACPICA: Tables: Update for DMAR table changes.
ACPICA: Remove some extraneous printf arguments.
ACPICA: Update for comments/formatting. No functional changes.
ACPICA: Disassembler: Add support for the ToUUID opererator (macro).
ACPICA: Remove a redundant cast to acpi_size for ACPI_OFFSET() macro.
ACPICA: Work around an ancient GCC bug.
Update table compiler and disassembler for new DMAR fields introduced
in Sept. 2013.
Note that Linux DMAR users need to be updated after applying this change.
[zetalog: changing drivers/iommu/dmar.c accordingly]
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The references to the device state are not dropped
everywhere. This might cause a dead-lock in
amd_iommu_free_device(). Fix it.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Oded Gabbay <oded.gabbay@amd.com>
All calls to this call-back are wrapped with
mmu_notifer_invalidate_range_start()/end(), making this
notifier pretty useless, so remove it.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Oded Gabbay <oded.gabbay@amd.com>
With calling te mmu_notifier_register function we hold a
reference to the mm_struct that needs to be released in
mmu_notifier_unregister. This is true even if the notifier
was already unregistered from exit_mmap and the .release
call-back has already run.
So make sure we call mmu_notifier_unregister unconditionally
in amd_iommu_unbind_pasid.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Oded Gabbay <oded.gabbay@amd.com>
For IOMMU to use on Exynos platforms, we need to enable ARM_DMA_USE_IOMMU. It
would be better to select it by default when EXYNOS_IOMMU is enabled.
Signed-off-by: Tushar Behera <tushar.b@samsung.com>
Reviewed-by: Sachin Kamat <sachin.kamat@samsung.com>
Reviewed-by: Cho KyongHo <pullip.cho@samsung.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The user of the IOMMU API domain expects to have full control of
the IOVA space for the domain. RMRRs are fundamentally incompatible
with that idea. We can neither map the RMRR into the IOMMU API
domain, nor can we guarantee that the device won't continue DMA with
the area described by the RMRR as part of the new domain. Therefore
we must prevent such devices from being used by the IOMMU API.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The OMAP3 ISP driver was the only user of the OMAP IOVMM API. Now that
is has been ported to the DMA API, remove the unused virtual memory
manager.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IOMMU units may dynamically attached to/detached from domains,
so we should scan all active IOMMU units when computing iommu_snooping
flag for a domain instead of only scanning IOMMU units associated
with the domain.
Also check snooping and superpage capabilities when hot-adding DMAR units.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduce helper function domain_pfn_within_range() to simplify code
and improve readability.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduce intel_unmap() to reduce duplicated code in intel_unmap_sg()
and intel_unmap_page().
Also let dma_pte_free_pagetable() to call dma_pte_clear_range() directly,
so caller only needs to call dma_pte_free_pagetable().
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Virtual machine domains are created by intel_iommu_domain_init() and
should be destroyed by intel_iommu_domain_destroy(). So avoid freeing
virtual machine domain data structure in free_dmar_iommu() when
doamin->iommu_count reaches zero, otherwise it may cause invalid
memory access because the IOMMU framework still holds references
to the domain structure.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Static identity and virtual machine domains may be cached in
iommu->domain_ids array after corresponding IOMMUs have been removed
from domain->iommu_bmp. So we should check domain->iommu_bmp before
decreasing domain->iommu_count in function free_dmar_iommu(), otherwise
it may cause free of inuse domain data structure.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Check the same domain id is allocated for si_domain on each IOMMU,
otherwise the IOTLB flush for si_domain will fail.
Now the rules to allocate and manage domain id are:
1) For normal and static identity domains, domain id is allocated
when creating domain structure. And this id will be written into
context entry.
2) For virtual machine domain, a virtual id is allocated when creating
domain. And when binding virtual machine domain to an iommu, a real
domain id is allocated on demand and this domain id will be written
into context entry. So domain->id for virtual machine domain may be
different from the domain id written into context entry(used by
hardware).
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Introduce domain_attach_iommu()/domain_detach_iommu() and refine
iommu_attach_domain()/iommu_detach_domain() to make code symmetric
and improve readability.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For virtual machine domains, domain->id is a virtual id, and the real
domain id written into context entry is dynamically allocated.
So use the real domain id instead of domain->id when flushing iotlbs
for virtual machine domains.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For virtual machine and static identity domains, there may be devices
from different PCI segments associated with the same domain.
So function iommu_support_dev_iotlb() should also match PCI segment
number (iommu unit) when searching for dev_iotlb capable devices.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This branch moves code related to the Tegra fuses out of arch/arm and
into a centralized location which could be shared with ARM64. It also
adds support for reading the fuse data through sysfs.
Included is also some preparatory work that moves Tegra-related header
files from include/linux to include/soc/tegra as suggested by Arnd.
Furthermore the Tegra chip ID is now retrieved using a function rather
than a variable so that sanity checks can be done. This is convenient
in subsequent patches that will move some of the code that's currently
called from Tegra machine setup into regular initcalls so that it can
be reused on 64-bit ARM. The sanity checks help with verifying that no
code tries to obtain the Tegra chip ID before the underlying driver is
properly initialized.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=XyRE
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-3.17-fuse-move' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/cleanup
Merge "ARM: tegra: move fuse code out of arch/arm" from Thierry Reding:
This branch moves code related to the Tegra fuses out of arch/arm and
into a centralized location which could be shared with ARM64. It also
adds support for reading the fuse data through sysfs.
Included is also some preparatory work that moves Tegra-related header
files from include/linux to include/soc/tegra as suggested by Arnd.
Furthermore the Tegra chip ID is now retrieved using a function rather
than a variable so that sanity checks can be done. This is convenient
in subsequent patches that will move some of the code that's currently
called from Tegra machine setup into regular initcalls so that it can
be reused on 64-bit ARM. The sanity checks help with verifying that no
code tries to obtain the Tegra chip ID before the underlying driver is
properly initialized.
* tag 'tegra-for-3.17-fuse-move' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: fuse: fix dummy functions
soc/tegra: fuse: move APB DMA into Tegra20 fuse driver
soc/tegra: Add efuse and apbmisc bindings
soc/tegra: Add efuse driver for Tegra
ARM: tegra: move fuse exports to soc/tegra/fuse.h
ARM: tegra: export apb dma readl/writel
ARM: tegra: Use a function to get the chip ID
ARM: tegra: Sort includes alphabetically
ARM: tegra: Move includes to include/soc/tegra
Signed-off-by: Olof Johansson <olof@lixom.net>
In order to not clutter the include/linux directory with SoC specific
headers, move the Tegra-specific headers out into a separate directory.
Signed-off-by: Thierry Reding <treding@nvidia.com>
On the error path of amd_iommu_bind_pasid() we call
mmu_notifier_unregister() for cleanup. This calls
mn_release() which calls the users inv_ctx_cb function if
one is available. Since the pasid is not set up yet there is
nothing the user can to tear down in this call-back. So
don't call inv_ctx_cb on the error path of
amd_iommu_unbind_pasid() and make life of the users simpler.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Oded Gabbay <Oded.Gabbay@amd.com>
Since we are only caring about the lifetime of the mm_struct
and not the task we can't safely keep a reference to it. The
reference is also not needed anymore, so remove that code
entirely.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Oded Gabbay <Oded.Gabbay@amd.com>
With mmu_notifiers we don't need to hold a reference to the
mm_struct during the time the pasid is bound to a device. We
can rely on the .mn_release call back to inform us when the
mm_struct goes away.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Oded Gabbay <Oded.Gabbay@amd.com>
This is used to signal the ppr_notifer function that no more
faults should be processes on this pasid_state. This way we
can keep the pasid_state safely in the state-table so that
it can be freed in the amd_iommu_unbind_pasid() function.
This allows us to not hold a reference to the mm_struct
during the whole pasid-binding-time.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Oded Gabbay <Oded.Gabbay@amd.com>
In case we are not able to allocate a fault structure a
reference to the pasid_state will be leaked. Fix that by
dropping the reference in the error path in case we hold
one.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Oded Gabbay <Oded.Gabbay@amd.com>
Unbind_pasid is only called from mn_release which already
has the pasid_state. Use this to simplify the unbind_pasid
path and get rid of __unbind_pasid.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Oded Gabbay <Oded.Gabbay@amd.com>
The mmu_notifier state is part of pasid_state so it can't be
freed in the mn_release path. Free the pasid_state after
mmu_notifer_unregister has completed.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Oded Gabbay <Oded.Gabbay@amd.com>
This function is called only in the mn_release() path, so
there is no need to unregister the mmu_notifer here.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Oded Gabbay <Oded.Gabbay@amd.com>
Any kernel source registering the invalid PPR calback may include the header file with PPR fault flags macros definitions.
Thus we move them to include/linux/amd-iommu.h
Signed-off-by: Alexey Skidanov <Alexey.Skidanov@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Fix some issues reported by checkpatch.pl. Mostly whitespace, but also
includes min=>min_t, kzalloc=>kcalloc, and kmalloc=>kmalloc_array.
The only issue I'm leaving alone is:
arm-smmu.c:853: WARNING: line over 80 characters
#853: FILE: arm-smmu.c:853:
+ (MAIR_ATTR_WBRWA << MAIR_ATTR_SHIFT(MAIR_ATTR_IDX_CACHE)) |
since it seems to be a case where "exceeding 80 columns significantly
increases readability and does not hide information."
(Documentation/CodingStyle).
Signed-off-by: Mitchel Humpherys <mitchelh@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
This structure is read-only data and should never be modified.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Earlier PTR_ERR was being returned even if group was set to null.
Now, we explicitly set an ERR_PTR value in case the group pointer is
NULL.
Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Store the domain information for the device, only if it's not already
attached to a domain.
Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
is_power_of_2 requires an unsigned long parameter which would
lead to truncation of 64 bit values on 32 bit architectures.
__ffs also expects an unsigned long parameter thus won't work
for 64 bit values on 32 bit architectures.
Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com>
Tested-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If somebody attempts to check the capability of an IOMMU domain prior to
device attach, then we'll try to dereference a NULL SMMU pointer through
the SMMU domain (since we can't determine the actual SMMU instance until
we have a device attached).
This patch fixes the capability check so that non-global features are
reported as being absent when no device is attached to the domain.
Signed-off-by: Will Deacon <will.deacon@arm.com>
AMD-Vi support for IOMMU sysfs. This allows us to associate devices
with a specific IOMMU device and examine the capabilities and features
of that IOMMU. The AMD IOMMU is hosted on and actual PCI device, so
we make that device the parent for the IOMMU class device. This
initial implementaiton exposes only the capability header and extended
features register for the IOMMU.
# find /sys | grep ivhd
/sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0
/sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0/devices
/sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0/devices/0000:00:00.0
/sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0/devices/0000:00:02.0
/sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0/devices/0000:00:04.0
/sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0/devices/0000:00:09.0
/sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0/devices/0000:00:11.0
/sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0/devices/0000:00:12.0
/sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0/devices/0000:00:12.2
/sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0/devices/0000:00:13.0
...
/sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0/power
/sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0/power/control
...
/sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0/device
/sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0/subsystem
/sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0/amd-iommu
/sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0/amd-iommu/cap
/sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0/amd-iommu/features
/sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0/uevent
/sys/class/iommu/ivhd0
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Register our DRHD IOMMUs, cross link devices, and provide a base set
of attributes for the IOMMU. Note that IRQ remapping support parses
the DMAR table very early in boot, well before the iommu_class can
reasonably be setup, so our registration is split between
intel_iommu_init(), which occurs later, and alloc_iommu(), which
typically occurs much earlier, but may happen at any time later
with IOMMU hot-add support.
On a typical desktop system, this provides the following (pruned):
$ find /sys | grep dmar
/sys/devices/virtual/iommu/dmar0
/sys/devices/virtual/iommu/dmar0/devices
/sys/devices/virtual/iommu/dmar0/devices/0000:00:02.0
/sys/devices/virtual/iommu/dmar0/intel-iommu
/sys/devices/virtual/iommu/dmar0/intel-iommu/cap
/sys/devices/virtual/iommu/dmar0/intel-iommu/ecap
/sys/devices/virtual/iommu/dmar0/intel-iommu/address
/sys/devices/virtual/iommu/dmar0/intel-iommu/version
/sys/devices/virtual/iommu/dmar1
/sys/devices/virtual/iommu/dmar1/devices
/sys/devices/virtual/iommu/dmar1/devices/0000:00:00.0
/sys/devices/virtual/iommu/dmar1/devices/0000:00:01.0
/sys/devices/virtual/iommu/dmar1/devices/0000:00:16.0
/sys/devices/virtual/iommu/dmar1/devices/0000:00:1a.0
/sys/devices/virtual/iommu/dmar1/devices/0000:00:1b.0
/sys/devices/virtual/iommu/dmar1/devices/0000:00:1c.0
...
/sys/devices/virtual/iommu/dmar1/intel-iommu
/sys/devices/virtual/iommu/dmar1/intel-iommu/cap
/sys/devices/virtual/iommu/dmar1/intel-iommu/ecap
/sys/devices/virtual/iommu/dmar1/intel-iommu/address
/sys/devices/virtual/iommu/dmar1/intel-iommu/version
/sys/class/iommu/dmar0
/sys/class/iommu/dmar1
(devices also link back to the dmar units)
This makes address, version, capabilities, and extended capabilities
available, just like printed on boot. I've tried not to duplicate
data that can be found in the DMAR table, with the exception of the
address, which provides an easy way to associate the sysfs device with
a DRHD entry in the DMAR. It's tempting to add scopes and RMRR data
here, but the full DMAR table is already exposed under /sys/firmware/
and therefore already provides a way for userspace to learn such
details.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IOMMUs currently have no common representation to userspace, most
seem to have no representation at all aside from a few printks
on bootup. There are however features of IOMMUs that are useful
to know about. For instance the IOMMU might support superpages,
making use of processor large/huge pages more important in a device
assignment scenario. It's also useful to create cross links between
devices and IOMMU hardware units, so that users might be able to
load balance their devices to avoid thrashing a single hardware unit.
This patch adds a device create and destroy interface as well as
device linking, making it very lightweight for an IOMMU driver to add
basic support. IOMMU drivers can provide additional attributes
automatically by using an attribute_group.
The attributes exposed are expected to be relatively device specific,
the means to retrieve them certainly are, so there are currently no
common attributes for the new class created here.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The single helper here no longer has any users.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Drop custom code and use IOMMU provided grouping support for PCI.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Varun Sethi <varun.sethi@freescale.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
VT-d code currently makes use of pci_find_upstream_pcie_bridge() in
order to find the topology based alias of a device. This function has
a few problems. First, it doesn't check the entire alias path of the
device to the root bus, therefore if a PCIe device is masked upstream,
the wrong result is produced. Also, it's known to get confused and
give up when it crosses a bridge from a conventional PCI bus to a PCIe
bus that lacks a PCIe capability. The PCI-core provided DMA alias
support solves both of these problems and additionally adds support
for DMA function quirks allowing VT-d to work with devices like
Marvell and Ricoh with known broken requester IDs.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The IOMMU code now provides a common interface for finding or
creating an IOMMU group for a device on PCI buses. Make use of it
and remove piles of code.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The common iommu_group_get_for_dev() allows us to greatly simplify
our group lookup for a new device. Also, since we insert IVRS
aliases into the PCI DMA alias quirks, we should alway come up with
the same results as the existing code.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
AMD-Vi already has a concept of an alias provided via the IVRS table.
Now that PCI-core also understands aliases, we need to incorporate
both aspects when programming the IOMMU. IVRS is generally quite
reliable, so we continue to prefer it when an alias is present. For
cases where we have an IVRS alias that does not match the PCI alias
or where PCI does not report an alias, report the mismatch to allow
us to collect more quirks and dynamically incorporate the alias into
the device alias quirks where possible.
This should allow AMD-Vi to work with devices like Marvell and Ricoh
with DMA function alias quirks unknown to the BIOS.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently each IOMMU driver that supports IOMMU groups has its own
code for discovering the base device used in grouping. This code
is generally not specific to the IOMMU hardware, but to the bus of
the devices managed by the IOMMU. We can therefore create a common
interface for supporting devices on different buses.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
suppress compiler warnings:
drivers/iommu/intel-iommu.c: In function ‘device_to_iommu’:
drivers/iommu/intel-iommu.c:673: warning: ‘segment’ may be used uninitialized in this function
drivers/iommu/intel-iommu.c: In function ‘get_domain_for_dev.clone.3’:
drivers/iommu/intel-iommu.c:2217: warning: ‘bridge_bus’ may be used uninitialized in this function
drivers/iommu/intel-iommu.c:2217: warning: ‘bridge_devfn’ may be used uninitialized in this function
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use inline function dma_pte_superpage() instead of macro for
better readability.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Alloc_domain() will initialize domain->nid to -1. So the
initialization for domain->nid in md_domain_init() is redundant,
clear it.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
__dmar_enable_qi() will initialize free_head,free_tail and
free_cnt for q_inval. Remove the redundant initialization
in dmar_enable_qi().
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use list_for_each_entry_safe() instead of list_entry()
to simplify code.
Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
For an SMMU that supports both Stage-1 and Stage-2 mappings (but not
nested translation), then we should prefer stage-1 mappings as we
otherwise rely on the memory attributes of the incoming transactions
for IOMMU_CACHE mappings.
Signed-off-by: Will Deacon <will.deacon@arm.com>
The ARM SMMU driver has supported chained SMMUs (i.e. SMMUs connected
back-to-back in series) via the smmu-parent property in device tree.
This was in anticipation of somebody building such a configuration,
however that seems not to be the case.
This patch removes the unused chained SMMU hack from the driver. We can
consider adding it back later if somebody decided they need it, but for
the time being it's just pointless mess that we're carrying in mainline.
Removal of the feature also makes migration to the generic IOMMU bindings
easier.
Signed-off-by: Will Deacon <will.deacon@arm.com>
MSIs are just seen as bog standard memory writes by the ARM SMMU, so
they can be translated (and isolated) in the same way.
This patch adds the IOMMU_CAP_INTR_REMAP capability to the ARM SMMU
driver and reworks our capabaility code so that we don't assume the
caps are organised as bits in a bitmask (since this isn't the intention).
Signed-off-by: Will Deacon <will.deacon@arm.com>
This patch extends the ARM SMMU driver so that it can handle PCI master
devices in addition to platform devices described in the device tree.
The driver is informed about the PCI host controller in the DT via a
phandle to the host controller in the mmu-masters property. The host
controller is then added to the master tree for that SMMU, just like a
normal master (although it probably doesn't advertise any StreamIDs).
When a device is added to the PCI bus, we set the archdata.iommu pointer
for that device to describe its StreamID (actually its RequesterID for
the moment). This allows us to re-use our existing data structures using
the host controller of_node for everything apart from StreamID
configuration, where we reach into the archdata for the information we
require.
Cc: Varun Sethi <varun.sethi@freescale.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
T0SZ controls the input address range for TTBR0, so use the input
address range rather than the output address range for the calculation.
For stage-2, this means using the output size of stage-1.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Commit e79df31 introduced mmu_notifer_count to protect
against parallel mmu_notifier_invalidate_range_start/end
calls. The patch left a small race condition when
invalidate_range_end() races with a new
invalidate_range_start() the empty page-table may be
reverted leading to stale TLB entries in the IOMMU and the
device. Use a spin_lock instead of just an atomic variable
to eliminate the race.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Function dmar_iommu_notify_scope_dev() makes a wrong assumption that
there's one RMRR for each PCI device at most, which causes DMA failure
on some HP platforms. So enhance dmar_iommu_notify_scope_dev() to
handle multiple RMRRs for the same PCI device.
Fixbug: https://bugzilla.novell.com/show_bug.cgi?id=879482
Cc: <stable@vger.kernel.org> # 3.15
Reported-by: Tom Mingarelli <thomas.mingarelli@hp.com>
Tested-by: Linda Knippers <linda.knippers@hp.com>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The changes include:
* A new IOMMU driver for ARM Renesas SOCs
* Updates and fixes for the ARM Exynos driver to bring it closer
to a usable state again
* Convert the AMD IOMMUv2 driver to use the
mmu_notifier->release call-back instead of the task_exit
notifier
* Random other fixes and minor improvements to a number of other
IOMMU drivers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=1DJL
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu into next
Pull IOMMU updates from Joerg Roedel:
"The changes include:
- a new IOMMU driver for ARM Renesas SOCs
- updates and fixes for the ARM Exynos driver to bring it closer to a
usable state again
- convert the AMD IOMMUv2 driver to use the mmu_notifier->release
call-back instead of the task_exit notifier
- random other fixes and minor improvements to a number of other
IOMMU drivers"
* tag 'iommu-updates-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (54 commits)
iommu/msm: Use devm_ioremap_resource to simplify code
iommu/amd: Fix recently introduced compile warnings
arm/ipmmu-vmsa: Fix compile error
iommu/exynos: Fix checkpatch warning
iommu/exynos: Fix trivial typo
iommu/exynos: Remove invalid symbol dependency
iommu: fsl_pamu.c: Fix for possible null pointer dereference
iommu/amd: Remove duplicate checking code
iommu/amd: Handle parallel invalidate_range_start/end calls correctly
iommu/amd: Remove IOMMUv2 pasid_state_list
iommu/amd: Implement mmu_notifier_release call-back
iommu/amd: Convert IOMMUv2 state_table into state_list
iommu/amd: Don't access IOMMUv2 state_table directly
iommu/ipmmu-vmsa: Support clearing mappings
iommu/ipmmu-vmsa: Remove stage 2 PTE bits definitions
iommu/ipmmu-vmsa: Support 2MB mappings
iommu/ipmmu-vmsa: Rewrite page table management
iommu/ipmmu-vmsa: PMD is never folded, PUD always is
iommu/ipmmu-vmsa: Set the PTE contiguous hint bit when possible
iommu/ipmmu-vmsa: Define driver-specific page directory sizes
...
Merge misc updates from Andrew Morton:
- a few fixes for 3.16. Cc'ed to stable so they'll get there somehow.
- various misc fixes and cleanups
- most of the ocfs2 queue. Review is slow...
- most of MM. The MM queue is pretty huge this time, but not much in
the way of feature work.
- some tweaks under kernel/
- printk maintenance work
- updates to lib/
- checkpatch updates
- tweaks to init/
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (276 commits)
fs/autofs4/dev-ioctl.c: add __init to autofs_dev_ioctl_init
fs/ncpfs/getopt.c: replace simple_strtoul by kstrtoul
init/main.c: remove an ifdef
kthreads: kill CLONE_KERNEL, change kernel_thread(kernel_init) to avoid CLONE_SIGHAND
init/main.c: add initcall_blacklist kernel parameter
init/main.c: don't use pr_debug()
fs/binfmt_flat.c: make old_reloc() static
fs/binfmt_elf.c: fix bool assignements
fs/efs: convert printk(KERN_DEBUG to pr_debug
fs/efs: add pr_fmt / use __func__
fs/efs: convert printk to pr_foo()
scripts/checkpatch.pl: device_initcall is not the only __initcall substitute
checkpatch: check stable email address
checkpatch: warn on unnecessary void function return statements
checkpatch: prefer kstrto<foo> to sscanf(buf, "%<lhuidx>", &bar);
checkpatch: add warning for kmalloc/kzalloc with multiply
checkpatch: warn on #defines ending in semicolon
checkpatch: make --strict a default for files in drivers/net and net/
checkpatch: always warn on missing blank line after variable declaration block
checkpatch: fix wildcard DT compatible string checking
...
This adds support for the DMA Contiguous Memory Allocator for
intel-iommu. This change enables dma_alloc_coherent() to allocate big
contiguous memory.
It is achieved in the same way as nommu_dma_ops currently does, i.e.
trying to allocate memory by dma_alloc_from_contiguous() and
alloc_pages() is used as a fallback.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull core irq updates from Thomas Gleixner:
"The irq department delivers:
- Another tree wide update to get rid of the horrible create_irq
interface along with its even more horrible variants. That also
gets rid of the last leftovers of the initial sparse irq hackery.
arch/driver specific changes have been either acked or ignored.
- A fix for the spurious interrupt detection logic with threaded
interrupts.
- A new ARM SoC interrupt controller
- The usual pile of fixes and improvements all over the place"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
Documentation: brcmstb-l2: Add Broadcom STB Level-2 interrupt controller binding
irqchip: brcmstb-l2: Add Broadcom Set Top Box Level-2 interrupt controller
genirq: Improve documentation to match current implementation
ARM: iop13xx: fix msi support with sparse IRQ
genirq: Provide !SMP stub for irq_set_affinity_notifier()
irqchip: armada-370-xp: Move the devicetree binding documentation
irqchip: gic: Use mask field in GICC_IAR
genirq: Remove dynamic_irq mess
ia64: Use irq_init_desc
genirq: Replace dynamic_irq_init/cleanup
genirq: Remove irq_reserve_irq[s]
genirq: Replace reserve_irqs in core code
s390: Avoid call to irq_reserve_irqs()
s390: Remove pointless arch_show_interrupts()
s390: pci: Check return value of alloc_irq_desc() proper
sh: intc: Remove pointless irq_reserve_irqs() invocation
x86, irq: Remove pointless irq_reserve_irqs() call
genirq: Make create/destroy_irq() ia64 private
tile: Use SPARSE_IRQ
tile: pci: Use irq_alloc/free_hwirq()
...
Here is the "big" pull request for 3.16-rc1.
Not a lot of changes here, some kernfs work, a revert of a very old
driver core change that ended up cauing some memory leaks on driver
probe error paths, and other minor things.
As was pointed out earlier today, one commit here,
26fc9cd200 (kernfs: move the last
knowledge of sysfs out from kernfs) is also needed in your 3.15-final
branch as well. If you could cherry-pick it there, it would be most
appreciated by Andy Lutomirski to prevent a regression there.
All of these have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iEYEABECAAYFAlONV9YACgkQMUfUDdst+yn0sQCfWWYg1oVXyu6f0uJjYbVBFkpD
UHgAoJxxfwTZJq/xYrnk6+RqUowIsUlh
=ojAS
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into next
Pull driver core / kernfs changes from Greg KH:
"Here is the "big" pull request for 3.16-rc1.
Not a lot of changes here, some kernfs work, a revert of a very old
driver core change that ended up cauing some memory leaks on driver
probe error paths, and other minor things.
As was pointed out earlier today, one commit here, 26fc9cd200
("kernfs: move the last knowledge of sysfs out from kernfs") is also
needed in your 3.15-final branch as well. If you could cherry-pick it
there, it would be most appreciated by Andy Lutomirski to prevent a
regression there.
All of these have been in linux-next for a while"
* tag 'driver-core-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
crypto/nx/nx-842: dev_set_drvdata can no longer fail
kernfs: move the last knowledge of sysfs out from kernfs
sysfs: fix attribute_group bin file path on removal
sysfs.h: don't return a void-valued expression in sysfs_remove_file
init.h: Update initcall_sync variants to fix build errors
driver core: Inline dev_set/get_drvdata
driver core: dev_get_drvdata: Don't check for NULL dev
driver core: dev_set_drvdata returns void
driver core: dev_set_drvdata can no longer fail
driver core: Move driver_data back to struct device
lib/devres.c: fix checkpatch warnings
lib/devres.c: use dev in devm_request_and_ioremap
kobject: Make support for uevent_helper optional.
kernfs: make kernfs_notify() trigger inotify events too
kernfs: implement kernfs_root->supers list
Use devm_ioremap_resource() to make the code simpler, drop unused variable,
redundant return value check, and error-handing code.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Fix two compile warnings about unused variables introduced
by commit ecef115.
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
So there is no point in checking its return value, which will soon
disappear.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function arm_iommu_create_mapping lost the order
parameter. Remove it from this IOMMU driver too to make it
build.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Silences the following type of warnings:
WARNING: Missing a blank line after declarations
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
EXYNOS_DEV_SYSMMU symbol is not defined anywhere and prevents building
the Exynos driver. Remove it.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
There is otherwise a risk of a possible null pointer dereference.
Was largely found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Reviewed-by: Bharat Bhushan <bharat.bhushan@freescale.com>
Acked-by: Varun Sethi <Varun.Sethi@freescale.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
amd_iommu_rlookup_table[devid] != NULL is already guaranteed
by check_device called before, it's fine to attach device at
this point.
Signed-off-by: Vaughan Cao <vaughan.cao@oracle.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add a counter to the pasid_state so that we do not restore
the original page-table before all invalidate_range_start
to invalidate_range_end sections have finished.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This list was only used for the task_exit notifier function.
Now that it is gone we can remove it.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Jay Cornwall <Jay.Cornwall@amd.com>