The rules are as follows, if IOSQE_IO_HARDLINK is specified, then it's a
link and there is no need to set IOSQE_IO_LINK separately, though it
could be there. Add proper check and ensure that IOSQE_IO_HARDLINK
implies IOSQE_IO_LINK.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We're currently not retaining sqe data for accept, fsync, and
sync_file_range. None of these commands need data outside of what
is directly provided, hence it can't go stale when the request is
deferred. However, it can get reused, if an application reuses
SQE entries.
Ensure that we retain the information we need and only read the sqe
contents once, off the submission path. Most of this is just moving
code into a prep and finish function.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We pass in req->sqe for all of them, no need to pass it in as the
request is always passed in. This is a necessary prep patch to be
able to cleanup/fix the request prep path.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some of these code paths assume that any force_nonblock == true issue
is not prepped, but that's not true if we did prep as part of link setup
earlier. Check if we already have an async context allocate before
setting up a new one.
Cleanup the async context setup in general, we have a lot of duplicated
code there.
Fixes: 03b1230ca1 ("io_uring: ensure async punted sendmsg/recvmsg requests copy data")
Fixes: f67676d160 ("io_uring: ensure async punted read/write requests copy iovec")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
DT property definitions must be under a 'properties' keyword. This was
missing for 'snps,tso' in an if/then clause. A meta-schema fix will
catch future errors like this.
Fixes: 7db3545aef ("dt-bindings: net: stmmac: Convert the binding to a schemas")
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
First set of fixes for v5.5. Fixing security issues, some regressions
and few major bugs.
mwifiex
* security fix for handling country Information Elements (CVE-2019-14895)
* security fix for handling TDLS Information Elements
ath9k
* fix endian issue with ath9k_pci_owl_loader
mt76
* fix default mac address handling
iwlwifi
* fix merge damage which lead to firmware crashing during boot on some devices
* fix device initialisation regression on some devices
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJd+P4eAAoJEG4XJFUm622bnOQH/RHSFFQNjxfPboZoozKb0/mT
6YtrG+0K1z8E21Os2bd+s4aRJgq1oGKDocMie5y53M38qQ5N3FchzcGopNRCRy/a
gF1PzEqceOysbEtPOx4yI+c0Gfi7rS0SjEyf2XKGowXsoIZh4j+1xlWbF/JtHt6n
J901W1GW0ZUCHaP8KuZcbsS2nfdV8tFW2NQW3Xuhy+nOdBhNRL/lKSvlhZLCCAfY
f1eJrB0rAzQpCqw8Wuz2JzWsxBiTt+6Ucuzv4EkFVrt7Xnj00feghTKJkVDqa+fL
B9hTiiYh8sLGJkYHsZLDZIzAdOW8jmun1I+XFsjdl7ucLRYz6U8NL9jc6oIGK00=
=KJmM
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-2019-12-17' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for v5.5
First set of fixes for v5.5. Fixing security issues, some regressions
and few major bugs.
mwifiex
* security fix for handling country Information Elements (CVE-2019-14895)
* security fix for handling TDLS Information Elements
ath9k
* fix endian issue with ath9k_pci_owl_loader
mt76
* fix default mac address handling
iwlwifi
* fix merge damage which lead to firmware crashing during boot on some devices
* fix device initialisation regression on some devices
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Upon reusing the ptp_qoriq driver, the ptp_qoriq_free() function was
used on the remove path to free any allocated resources.
The ptp_qoriq IRQ is among these resources that are freed in
ptp_qoriq_free() even though it is also a managed one (allocated using
devm_request_threaded_irq).
Drop the resource managed version of requesting the IRQ in order to not
trigger a double free of the interrupt as below:
[ 226.731005] Trying to free already-free IRQ 126
[ 226.735533] WARNING: CPU: 6 PID: 749 at kernel/irq/manage.c:1707
__free_irq+0x9c/0x2b8
[ 226.743435] Modules linked in:
[ 226.746480] CPU: 6 PID: 749 Comm: bash Tainted: G W
5.4.0-03629-gfd7102c32b2c-dirty #912
[ 226.755857] Hardware name: NXP Layerscape LX2160ARDB (DT)
[ 226.761244] pstate: 40000085 (nZcv daIf -PAN -UAO)
[ 226.766022] pc : __free_irq+0x9c/0x2b8
[ 226.769758] lr : __free_irq+0x9c/0x2b8
[ 226.773493] sp : ffff8000125039f0
(...)
[ 226.856275] Call trace:
[ 226.858710] __free_irq+0x9c/0x2b8
[ 226.862098] free_irq+0x30/0x70
[ 226.865229] devm_irq_release+0x14/0x20
[ 226.869054] release_nodes+0x1b0/0x220
[ 226.872790] devres_release_all+0x34/0x50
[ 226.876790] device_release_driver_internal+0x100/0x1c0
Fixes: d346c9e86d ("dpaa2-ptp: reuse ptp_qoriq driver")
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=AnHL
-----END PGP SIGNATURE-----
Merge tag 'for-5.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A mix of regression fixes and regular fixes for stable trees:
- fix swapped error messages for qgroup enable/rescan
- fixes for NO_HOLES feature with clone range
- fix deadlock between iget/srcu lock/synchronize srcu while freeing
an inode
- fix double lock on subvolume cross-rename
- tree log fixes
* fix missing data checksums after replaying a log tree
* also teach tree-checker about this problem
* skip log replay on orphaned roots
- fix maximum devices constraints for RAID1C -3 and -4
- send: don't print warning on read-only mount regarding orphan
cleanup
- error handling fixes"
* tag 'for-5.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: send: remove WARN_ON for readonly mount
btrfs: do not leak reloc root if we fail to read the fs root
btrfs: skip log replay on orphaned roots
btrfs: handle ENOENT in btrfs_uuid_tree_iterate
btrfs: abort transaction after failed inode updates in create_subvol
Btrfs: fix hole extent items with a zero size after range cloning
Btrfs: fix removal logic of the tree mod log that leads to use-after-free issues
Btrfs: make tree checker detect checksum items with overlapping ranges
Btrfs: fix missing data checksums after replaying a log tree
btrfs: return error pointer from alloc_test_extent_buffer
btrfs: fix devs_max constraints for raid1c3 and raid1c4
btrfs: tree-checker: Fix error format string for size_t
btrfs: don't double lock the subvol_sem for rename exchange
btrfs: handle error in btrfs_cache_block_group
btrfs: do not call synchronize_srcu() in inode_tree_del
Btrfs: fix cloning range with a hole when using the NO_HOLES feature
btrfs: Fix error messages in qgroup_rescan_init
The comment says "this should never fail", but it definitely can fail
when you have odd initial boot filesystems, or kernel configurations.
So get the error handling right: filp_open() returns an error pointer.
Reported-by: Jesse Barnes <jsbarnes@google.com>
Reported-by: youling 257 <youling257@gmail.com>
Fixes: 8243186f0c ("fs: remove ksys_dup()")
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A small set of fixes for mostly minor issues here, the only real code
ones are Wen Yang's fixes for error handling in the core and Christian
Marussi's list_voltage() change which is a fix for disruptively bad
performance for regulators with continuous voltage control (which are
rare).
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl34yr4THGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0KJyB/97dTSIk+gJxwFSc9tTPbMvSGvGqoEL
AUE8JSHVNqav9IdFKwtzxa6dnjVy1U23ySemeOAvabmLmyJjoIRMJAeA10+OwcMl
2dq3j/3z6Vl305QSVNu3yMcxp2XtQ8nhKOpNz+rDGwRAvr08YBjdrCPv4dbiv/ei
G7z7sOwcNNACE7CNGat3kOh9cOJm3wVzls1bF5Ix+kDlWH6v591GSY1MMXdhx6Tj
RS9HCjj8Gp4O+vnJH4r/AVkOyZp8SOSOje/+81pF68wc2g+S7XV8hE4kDipRlHS3
4aKpBbfyA4twjZ4AOCVGTwJrGXh6W7GhDlrbWCYyQ3y2hOfwgbh8sKzo
=Lx6m
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A small set of fixes for mostly minor issues here, the only real code
ones are Wen Yang's fixes for error handling in the core and Christian
Marussi's list_voltage() change which is a fix for disruptively bad
performance for regulators with continuous voltage control (which are
rare)"
* tag 'regulator-fix-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: rn5t618: fix module aliases
regulator: max77650: add of_match table
regulator: core: avoid unneeded .list_voltage calls
regulator: s5m8767: Fix a warning message
regulator: core: fix regulator_register() error paths to properly release rdev
regulator: fix use after free issue
A relatively large set of fixes here, the biggest part of it is for
fallout from the GPIO descriptor rework that affected several of the
devices with usable native chip select support. There's also some new
PCI IDs for Intel Jasper Lake devices.
The conversion to platform_get_irq() in the fsl driver is an incremental
fix for build errors introduced on SPARC by the earlier fix for error
handling in probe in that driver.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl34xt8THGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0D64B/91GGhGgNybvExhls79YKQx9STnv8Vl
sIVgbnVxnTHrAa+s/5ML0T8LzH9W5KcBUuL+KCd0oMdaE9QZSCKGdraEqDJz7Ie4
iHbBSAtwL0tegbyM+J4oKC3wen3Lg1u1iwn4Plo2fVKEah7zG6gdneQcf454EnEF
om2Sj2K7tqoqN1jIl0j/FGQtlDXvhzp3m+CyGakjzsBvINmSGixrO5Lit/dx3qSf
xkhLDWZqUk3UatusPXhpJJVxWPuVvT5NQkvUYDte1rHxrVdolYQctwBRPN/uZ2hq
FcLzUbWVFx7p3cDqvuQ6XTptpue4njnaPOT/LW6tud4BexlaV1q83XYs
=gPXn
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A relatively large set of fixes here, the biggest part of it is for
fallout from the GPIO descriptor rework that affected several of the
devices with usable native chip select support. There's also some new
PCI IDs for Intel Jasper Lake devices.
The conversion to platform_get_irq() in the fsl driver is an
incremental fix for build errors introduced on SPARC by the earlier
fix for error handling in probe in that driver"
* tag 'spi-fix-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: fsl: use platform_get_irq() instead of of_irq_to_resource()
spi: nxp-fspi: Ensure width is respected in spi-mem operations
spi: spi-ti-qspi: Fix a bug when accessing non default CS
spi: fsl: don't map irq during probe
spi: spi-cavium-thunderx: Add missing pci_release_regions()
spi: sprd: Fix the incorrect SPI register
gpiolib: of: Make of_gpio_spi_cs_get_count static
spi: fsl: Handle the single hardwired chipselect case
gpio: Handle counting of Freescale chipselects
spi: fsl: Fix GPIO descriptor support
spi: dw: Correct handling of native chipselect
spi: cadence: Correct handling of native chipselect
spi: pxa2xx: Add support for Intel Jasper Lake
Omar Sandoval reported that a 4G fallocate on the realtime device causes
filesystem shutdowns due to a log reservation overflow that happens when
we log the rtbitmap updates. Factor rtbitmap/rtsummary updates into the
the tr_write and tr_itruncate log reservation calculation.
"The following reproducer results in a transaction log overrun warning
for me:
mkfs.xfs -f -r rtdev=/dev/vdc -d rtinherit=1 -m reflink=0 /dev/vdb
mount -o rtdev=/dev/vdc /dev/vdb /mnt
fallocate -l 4G /mnt/foo
Reported-by: Omar Sandoval <osandov@osandov.com>
Tested-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Pull x86 fix from Ingo Molnar:
"Fix kexec booting with certain EFI memory map layouts"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/efi: Update e820 with reserved EFI boot services data to fix kexec breakage
Pull timer fixes from Ingo Molnar:
"Add HPET quirks for the Intel 'Coffee Lake H' and 'Ice Lake' platforms"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/intel: Disable HPET on Intel Ice Lake platforms
x86/intel: Disable HPET on Intel Coffee Lake H platforms
Pull scheduler fix from Ingo Molnar:
"Fix the guest-nice cpustat values in /proc"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/cputime, proc/stat: Fix incorrect guest nice cpustat value
Pull perf tooling fixes from Ingo Molnar:
"These are all perf tooling changes: most of them are fixes.
Note that the large CPU count related fixes go beyond regression
fixes, but the IPI-flood symptoms are severe enough that I think
justifies their inclusion"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
perf vendor events s390: Remove name from L1D_RO_EXCL_WRITES description
perf vendor events s390: Fix counter long description for DTLB1_GPAGE_WRITES
libtraceevent: Allow custom libdir path
perf header: Fix false warning when there are no duplicate cache entries
perf metricgroup: Fix printing event names of metric group with multiple events
perf/x86/pmu-events: Fix Kernel_Utilization metric
perf top: Do not bail out when perf_env__read_cpuid() returns ENOSYS
perf arch: Make the default get_cpuid() return compatible error
tools headers kvm: Sync linux/kvm.h with the kernel sources
tools headers UAPI: Update tools's copy of drm.h headers
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
perf inject: Fix processing of ID index for injected instruction tracing
perf report: Bail out --mem-mode if mem info is not available
perf report: Make -F more strict like -s
perf report/top TUI: Replace pr_err() with ui__error()
libtraceevent: Copy pkg-config file to output folder when using O=
libtraceevent: Fix lib installation with O=
perf kvm: Clarify the 'perf kvm' -i and -o command line options
tools arch x86: Sync asm/cpufeatures.h with the kernel sources
perf beauty: Add CLEAR_SIGHAND support for clone's flags arg
...
Pull locking fixes from Ingo Molnar:
"Tone down mutex debugging complaints, and annotate/fix spinlock
debugging data accesses for KCSAN"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "locking/mutex: Complain upon mutex API misuse in IRQ contexts"
locking/spinlock/debug: Fix various data races
Pull EFI fixes from Ingo Molnar:
"Protect presistent EFI memory reservations from kexec, fix EFIFB early
console, EFI stub graphics output fixes and other misc fixes."
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Don't attempt to map RCI2 config table if it doesn't exist
efi/earlycon: Remap entire framebuffer after page initialization
efi: Fix efi_loaded_image_t::unload type
efi/gop: Fix memory leak in __gop_query32/64()
efi/gop: Return EFI_SUCCESS if a usable GOP was found
efi/gop: Return EFI_NOT_FOUND if there are no usable GOPs
efi/memreserve: Register reservations as 'reserved' in /proc/iomem
Recently, there's been some compat ioctl cleanup, in which large
hardcoded lists were replaced with compat_ptr_ioctl. One of these
changes involved removing the random.c hardcoded list entries and adding
a compat ioctl function pointer to the random.c fops. In the process,
urandom was forgotten about, so this commit fixes that oversight.
Fixes: 507e4e2b43 ("compat_ioctl: remove /dev/random commands")
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20191217172455.186395-1-Jason@zx2c4.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Recently noticed that we're tracking programs related to local storage maps
through their prog pointer. This is a wrong assumption since the prog pointer
can still change throughout the verification process, for example, whenever
bpf_patch_insn_single() is called.
Therefore, the prog pointer that was assigned via bpf_cgroup_storage_assign()
is not guaranteed to be the same as we pass in bpf_cgroup_storage_release()
and the map would therefore remain in busy state forever. Fix this by using
the prog's aux pointer which is stable throughout verification and beyond.
Fixes: de9cbbaadb ("bpf: introduce cgroup storage maps")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/1471c69eca3022218666f909bc927a92388fd09e.1576580332.git.daniel@iogearbox.net
Non-mq devs do not honor REQ_NOWAIT so give a chance to the caller to repeat
request gracefully on -EAGAIN error.
The problem is well reproduced using io_uring:
mkfs.ext4 /dev/ram0
mount /dev/ram0 /mnt
# Preallocate a file
dd if=/dev/zero of=/mnt/file bs=1M count=1
# Start fio with io_uring and get -EIO
fio --rw=write --ioengine=io_uring --size=1M --direct=1 --name=job --filename=/mnt/file
Signed-off-by: Roman Penyaev <rpenyaev@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If a transaction error happens in vhci_recv_ret_submit(), event
handler closes connection and changes port status to kick hub_event.
Then hub tries to flush the endpoint URBs, but that causes infinite
loop between usb_hub_flush_endpoint() and vhci_urb_dequeue() because
"vhci_priv" in vhci_urb_dequeue() was already released by
vhci_recv_ret_submit() before a transmission error occurred. Thus,
vhci_urb_dequeue() terminates early and usb_hub_flush_endpoint()
continuously calls vhci_urb_dequeue().
The root cause of this issue is that vhci_recv_ret_submit()
terminates early without giving back URB when transaction error
occurs in vhci_recv_ret_submit(). That causes the error URB to still
be linked at endpoint list without “vhci_priv".
So, in the case of transaction error in vhci_recv_ret_submit(),
unlink URB from the endpoint, insert proper error code in
urb->status and give back URB.
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Suwan Kim <suwan.kim027@gmail.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20191213023055.19933-3-suwan.kim027@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When vhci uses SG and receives data whose size is smaller than SG
buffer size, it tries to receive more data even if it acutally
receives all the data from the server. If then, it erroneously adds
error event and triggers connection shutdown.
vhci-hcd should check if it received all the data even if there are
more SG entries left. So, check if it receivces all the data from
the server in for_each_sg() loop.
Fixes: ea44d19076 ("usbip: Implement SG support to vhci-hcd and stub driver")
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Suwan Kim <suwan.kim027@gmail.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191213023055.19933-2-suwan.kim027@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When disconnecting a USB hub that has some child device(s) connected to it
(such as a USB mouse), then the stack tries to clear halt and
reset device(s) which are _already_ physically disconnected.
The issue has been reproduced with:
CPU: IMX6D5EYM10AD or MCIMX6D5EYM10AE.
SW: U-Boot 2019.07 and kernel 4.19.40.
CPU: HP Proliant Microserver Gen8.
SW: Linux version 4.2.3-300.fc23.x86_64
In this situation there will be error bit for MMF active yet the
CERR equals EHCI_TUNE_CERR + halt. Existing implementation
interprets this as a stall [1] (chapter 8.4.5).
The possible conditions when the MMF will be active + halt
can be found from [2] (Table 4-13).
Fix for the issue is to check whether MMF is active and PID Code is
IN before checking for the stall. If these conditions are true then
it is not a stall.
What happens after the fix is that when disconnecting a hub with
attached device(s) the situation is not interpret as a stall.
[1] [https://www.usb.org/document-library/usb-20-specification, usb_20.pdf]
[2] [https://www.intel.com/content/dam/www/public/us/en/documents/
technical-specifications/ehci-specification-for-usb.pdf]
Signed-off-by: Erkka Talvitie <erkka.talvitie@vincit.fi>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/ef70941d5f349767f19c0ed26b0dd9eed8ad81bb.1576050523.git.erkka.talvitie@vincit.fi
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following compile error:
drivers/usb/typec/tcpm/fusb302.o: In function `tcpm_get_current_limit':
fusb302.c:(.text+0x3ee): undefined reference to `extcon_get_state'
fusb302.c:(.text+0x422): undefined reference to `extcon_get_state'
fusb302.c:(.text+0x450): undefined reference to `extcon_get_state'
fusb302.c:(.text+0x48c): undefined reference to `extcon_get_state'
drivers/usb/typec/tcpm/fusb302.o: In function `fusb302_probe':
fusb302.c:(.text+0x980): undefined reference to `extcon_get_extcon_dev'
make: *** [vmlinux] Error 1
It is because EXTCON is build as a module, but FUSB302 is not.
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/1576239378-50795-1-git-send-email-zhongjiang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit aac8da6517 ("intel_th: msu: Start handling IRQs") implicitly
relies on the use of devm_request_irq() to subsequently free the irqs on
device removal, but in case of the pci_free_irq_vectors() API, the
handlers need to be freed before it is called. Therefore, at the moment
the driver's remove path trips a BUG_ON(irq_has_action()):
> kernel BUG at drivers/pci/msi.c:375!
> invalid opcode: 0000 1 SMP
> CPU: 2 PID: 818 Comm: rmmod Not tainted 5.5.0-rc1+ #1
> RIP: 0010:free_msi_irqs+0x67/0x1c0
> pci_disable_msi+0x116/0x150
> pci_free_irq_vectors+0x1b/0x20
> intel_th_pci_remove+0x22/0x30 [intel_th_pci]
> pci_device_remove+0x3e/0xb0
> device_release_driver_internal+0xf0/0x1c0
> driver_detach+0x4c/0x8f
> bus_remove_driver+0x5c/0xd0
> driver_unregister+0x31/0x50
> pci_unregister_driver+0x40/0x90
> intel_th_pci_driver_exit+0x10/0xad6 [intel_th_pci]
> __x64_sys_delete_module+0x147/0x290
> ? exit_to_usermode_loop+0xd7/0x120
> do_syscall_64+0x57/0x1b0
> entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fix this by explicitly freeing irqs before freeing the vectors. We keep
using the devm_* variants because they are still useful in early error
paths.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: aac8da6517 ("intel_th: msu: Start handling IRQs")
Reported-by: Ammy Yi <ammy.yi@intel.com>
Tested-by: Ammy Yi <ammy.yi@intel.com>
Cc: stable@vger.kernel.org # v5.2+
Link: https://lore.kernel.org/r/20191217115527.74383-4-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds Intel(R) Trace Hub PCI ID for Comet Lake PCH-V.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191217115527.74383-2-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A collection of fixes since the merge window, mostly driver specific but
there's a few in the core that clean up fallout from the refactorings
done in the last cycle.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl34w3ITHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0FM/B/9zM8zae1DIXi10S7tRElz/LnadE7il
umQ34PoghSd/f9D5TCQZMgyLjdglyQGiOar4G1xkOEC87yjBCY8AOfcV3QQLRsgK
ej8AdrBGKQUWvCdoJGx/FsrwTpgBcvRNvVJbHIKab2BfGxZA8t733tMCAkuXHnty
/dtYhA5wjI6gGtUofihEp9jvVuRLWFjopaUJs4JANKO5pmRfXgzdayt74xUKz2/q
VQCp2dCmCSXSIyYUwoY/Dg9+3RQ6Ebt3YfSWBGUrxyW+EyYtCGz4lHzV3Wb+QThM
daV+wHXlz0vW4Zr6rUz6D6WlyiK9IlhEX+hdYJagFnHmKXNcpHHl2LvU
=sP7K
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.5-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.5
A collection of fixes since the merge window, mostly driver specific but
there's a few in the core that clean up fallout from the refactorings
done in the last cycle.
Use MCK_DIV8 when the clock divider is > 65535. Unfortunately the mode
register was already written thus the clock selection is ignored.
Fix by doing the baud rate calulation before setting the mode.
Fixes: 5bf5635ac1 ("tty/serial: atmel: add fractional baud rate support")
Signed-off-by: David Engraf <david.engraf@sysgo.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191216085403.17050-1-david.engraf@sysgo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There seems to be a race condition in tty drivers and I could see on
many boot cycles a NULL pointer dereference as tty_init_dev() tries to
do 'tty->port->itty = tty' even though tty->port is NULL.
'tty->port' will be set by the driver and if the driver has not yet done
it before we open the tty device we can get to this situation. By adding
some extra debug prints, I noticed that:
6.650130: uart_add_one_port
6.663849: register_console
6.664846: tty_open
6.674391: tty_init_dev
6.675456: tty_port_link_device
uart_add_one_port() registers the console, as soon as it registers, the
userspace tries to use it and that leads to tty_open() but
uart_add_one_port() has not yet done tty_port_link_device() and so
tty->port is not yet configured when control reaches tty_init_dev().
Further look into the code and tty_port_link_device() is done by
uart_add_one_port(). After registering the console uart_add_one_port()
will call tty_port_register_device_attr_serdev() and
tty_port_link_device() is called from this.
Call add tty_port_link_device() before uart_configure_port() is done and
add a check in tty_port_link_device() so that it only links the port if
it has not been done yet.
Suggested-by: Jiri Slaby <jslaby@suse.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191212131602.29504-1-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The load balance can fail to find a suitable task during the periodic check
because the imbalance is smaller than half of the load of the waiting
tasks. This results in the increase of the number of failed load balance,
which can end up to start an active migration. This active migration is
useless because the current running task is not a better choice than the
waiting ones. In fact, the current task was probably not running but
waiting for the CPU during one of the previous attempts and it had already
not been selected.
When load balance fails too many times to migrate a task, we should relax
the contraint on the maximum load of the tasks that can be migrated
similarly to what is done with cache hotness.
Before the rework, load balance used to set the imbalance to the average
load_per_task in order to mitigate such situation. This increased the
likelihood of migrating a task but also of selecting a larger task than
needed while more appropriate ones were in the list.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1575036287-6052-1-git-send-email-vincent.guittot@linaro.org
Because of CPU affinity, the local group can be skipped which breaks the
assumption that statistics are always collected for local group. With
uninitialized local_sgs, the comparison is meaningless and the behavior
unpredictable. This can even end up to use local pointer which is to
NULL in this case.
If the local group has been skipped because of CPU affinity, we return
the idlest group.
Fixes: 57abff067a ("sched/fair: Rework find_idlest_group()")
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: John Stultz <john.stultz@linaro.org>
Cc: rostedt@goodmis.org
Cc: valentin.schneider@arm.com
Cc: mingo@redhat.com
Cc: mgorman@suse.de
Cc: juri.lelli@redhat.com
Cc: dietmar.eggemann@arm.com
Cc: bsegall@google.com
Cc: qais.yousef@arm.com
Link: https://lkml.kernel.org/r/1575483700-22153-1-git-send-email-vincent.guittot@linaro.org
The psi window size is a u64 an can be up to 10 seconds right now,
which exceeds the lower 32 bits of the variable. We currently use
div_u64 for it, which is meant only for 32-bit divisors. The result is
garbage pressure sampling values and even potential div0 crashes.
Use div64_u64.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: Jingfeng Xie <xiejingfeng@linux.alibaba.com>
Link: https://lkml.kernel.org/r/20191203183524.41378-3-hannes@cmpxchg.org
Jingfeng reports rare div0 crashes in psi on systems with some uptime:
[58914.066423] divide error: 0000 [#1] SMP
[58914.070416] Modules linked in: ipmi_poweroff ipmi_watchdog toa overlay fuse tcp_diag inet_diag binfmt_misc aisqos(O) aisqos_hotfixes(O)
[58914.083158] CPU: 94 PID: 140364 Comm: kworker/94:2 Tainted: G W OE K 4.9.151-015.ali3000.alios7.x86_64 #1
[58914.093722] Hardware name: Alibaba Alibaba Cloud ECS/Alibaba Cloud ECS, BIOS 3.23.34 02/14/2019
[58914.102728] Workqueue: events psi_update_work
[58914.107258] task: ffff8879da83c280 task.stack: ffffc90059dcc000
[58914.113336] RIP: 0010:[] [] psi_update_stats+0x1c1/0x330
[58914.122183] RSP: 0018:ffffc90059dcfd60 EFLAGS: 00010246
[58914.127650] RAX: 0000000000000000 RBX: ffff8858fe98be50 RCX: 000000007744d640
[58914.134947] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00003594f700648e
[58914.142243] RBP: ffffc90059dcfdf8 R08: 0000359500000000 R09: 0000000000000000
[58914.149538] R10: 0000000000000000 R11: 0000000000000000 R12: 0000359500000000
[58914.156837] R13: 0000000000000000 R14: 0000000000000000 R15: ffff8858fe98bd78
[58914.164136] FS: 0000000000000000(0000) GS:ffff887f7f380000(0000) knlGS:0000000000000000
[58914.172529] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[58914.178467] CR2: 00007f2240452090 CR3: 0000005d5d258000 CR4: 00000000007606f0
[58914.185765] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[58914.193061] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[58914.200360] PKRU: 55555554
[58914.203221] Stack:
[58914.205383] ffff8858fe98bd48 00000000000002f0 0000002e81036d09 ffffc90059dcfde8
[58914.213168] ffff8858fe98bec8 0000000000000000 0000000000000000 0000000000000000
[58914.220951] 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[58914.228734] Call Trace:
[58914.231337] [] psi_update_work+0x22/0x60
[58914.237067] [] process_one_work+0x189/0x420
[58914.243063] [] worker_thread+0x4e/0x4b0
[58914.248701] [] ? process_one_work+0x420/0x420
[58914.254869] [] kthread+0xe6/0x100
[58914.259994] [] ? kthread_park+0x60/0x60
[58914.265640] [] ret_from_fork+0x39/0x50
[58914.271193] Code: 41 29 c3 4d 39 dc 4d 0f 42 dc <49> f7 f1 48 8b 13 48 89 c7 48 c1
[58914.279691] RIP [] psi_update_stats+0x1c1/0x330
The crashing instruction is trying to divide the observed stall time
by the sampling period. The period, stored in R8, is not 0, but we are
dividing by the lower 32 bits only, which are all 0 in this instance.
We could switch to a 64-bit division, but the period shouldn't be that
big in the first place. It's the time between the last update and the
next scheduled one, and so should always be around 2s and comfortably
fit into 32 bits.
The bug is in the initialization of new cgroups: we schedule the first
sampling event in a cgroup as an offset of sched_clock(), but fail to
initialize the last_update timestamp, and it defaults to 0. That
results in a bogusly large sampling period the first time we run the
sampling code, and consequently we underreport pressure for the first
2s of a cgroup's life. But worse, if sched_clock() is sufficiently
advanced on the system, and the user gets unlucky, the period's lower
32 bits can all be 0 and the sampling division will crash.
Fix this by initializing the last update timestamp to the creation
time of the cgroup, thus correctly marking the start of the first
pressure sampling period in a new cgroup.
Reported-by: Jingfeng Xie <xiejingfeng@linux.alibaba.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Link: https://lkml.kernel.org/r/20191203183524.41378-2-hannes@cmpxchg.org
Since commit
28875945ba ("rcu: Add support for consolidated-RCU reader checking")
there is an additional check to ensure that a RCU related lock is held
while the RCU list is iterated.
This section holds the SRCU reader lock instead.
Add annotation to list_for_each_entry_rcu() that pmus_srcu must be
acquired during the list traversal.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Link: https://lkml.kernel.org/r/20191119121429.zhcubzdhm672zasg@linutronix.de
Commit:
ccbebba4c6 ("perf/x86/intel/pt: Bypass PT vs. LBR exclusivity if the core supports it")
skips the PT/LBR exclusivity check on CPUs where PT and LBRs coexist, but
also inadvertently skips the active_events bump for PT in that case, which
is a bug. If there aren't any hardware events at the same time as PT, the
PMI handler will ignore PT PMIs, as active_events reads zero in that case,
resulting in the "Uhhuh" spurious NMI warning and PT data loss.
Fix this by always increasing active_events for PT events.
Fixes: ccbebba4c6 ("perf/x86/intel/pt: Bypass PT vs. LBR exclusivity if the core supports it")
Reported-by: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lkml.kernel.org/r/20191210105101.77210-1-alexander.shishkin@linux.intel.com
Commit
8062382c8d ("perf/x86/intel/bts: Add BTS PMU driver")
brought in a warning with the BTS buffer initialization
that is easily tripped with (assuming KPTI is disabled):
instantly throwing:
> ------------[ cut here ]------------
> WARNING: CPU: 2 PID: 326 at arch/x86/events/intel/bts.c:86 bts_buffer_setup_aux+0x117/0x3d0
> Modules linked in:
> CPU: 2 PID: 326 Comm: perf Not tainted 5.4.0-rc8-00291-gceb9e77324fa #904
> RIP: 0010:bts_buffer_setup_aux+0x117/0x3d0
> Call Trace:
> rb_alloc_aux+0x339/0x550
> perf_mmap+0x607/0xc70
> mmap_region+0x76b/0xbd0
...
It appears to assume (for lost raisins) that PagePrivate() is set,
while later it actually tests for PagePrivate() before using
page_private().
Make it consistent and always check PagePrivate() before using
page_private().
Fixes: 8062382c8d ("perf/x86/intel/bts: Add BTS PMU driver")
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lkml.kernel.org/r/20191205142853.28894-2-alexander.shishkin@linux.intel.com
UBSAN reported out-of-bound accesses for x86_pmu.event_map(), it's
arguments should be < x86_pmu.max_events. Make sure all users observe
this constraint.
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Meelis Roos <mroos@linux.ee>
perf top:
Arnaldo Carvalho de Melo:
- Do not bail out when perf_env__read_cpuid() returns ENOSYS, which
has been reported happening on aarch64.
perf metricgroup:
Kajol Jain:
- Fix printing event names of metric group with multiple events
vendor events:
x86:
Ravi Bangoria:
- Fix Kernel_Utilization metric.
s390:
Ed Maste:
- Fix counter long description for DTLB1_GPAGE_WRITES and L1D_RO_EXCL_WRITES.
perf header:
Michael Petlan:
- Fix false warning when there are no duplicate cache entries
libtraceevent:
Sudip Mukherjee:
- Allow custom libdir path
API headers:
Arnaldo Carvalho de Melo:
- Sync linux/kvm.h with the kernel sources.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXffs5QAKCRCyPKLppCJ+
J3YYAQDUUIeWWleZT+TG/KT+7dG9DS1fIWD+KZ4iFhPz8htVjwEA6y91sEp3niEm
Mexns4zfvgZS6acUei7KOnbtHeNMnwY=
=XPGP
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-5.5-20191216' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes:
perf top:
Arnaldo Carvalho de Melo:
- Do not bail out when perf_env__read_cpuid() returns ENOSYS, which
has been reported happening on aarch64.
perf metricgroup:
Kajol Jain:
- Fix printing event names of metric group with multiple events
vendor events:
x86:
Ravi Bangoria:
- Fix Kernel_Utilization metric.
s390:
Ed Maste:
- Fix counter long description for DTLB1_GPAGE_WRITES and L1D_RO_EXCL_WRITES.
perf header:
Michael Petlan:
- Fix false warning when there are no duplicate cache entries
libtraceevent:
Sudip Mukherjee:
- Allow custom libdir path
API headers:
Arnaldo Carvalho de Melo:
- Sync linux/kvm.h with the kernel sources.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently the reserved region for ISA is allocated with no
permissions. If a dma domain is being used, mapping this region will
fail. Set the permissions to DMA_PTE_READ|DMA_PTE_WRITE.
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: stable@vger.kernel.org # v5.3+
Fixes: d850c2ee5f ("iommu/vt-d: Expose ISA direct mapping region via iommu_get_resv_regions")
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
iommu_group_create_direct_mappings uses group->default_domain, but
right after it is called, request_default_domain_for_dev calls
iommu_domain_free for the default domain, and sets the group default
domain to a different domain. Move the
iommu_group_create_direct_mappings call to after the group default
domain is set, so the direct mappings get associated with that domain.
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: stable@vger.kernel.org
Fixes: 7423e01741 ("iommu: Add API to request DMA domain for device")
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If the default DMA domain of a group doesn't fit a device, it
will still sit in the group but use a private identity domain.
When map/unmap/iova_to_phys come through iommu API, the driver
should still serve them, otherwise, other devices in the same
group will be impacted. Since identity domain has been mapped
with the whole available memory space and RMRRs, we don't need
to worry about the impact on it.
Link: https://www.spinics.net/lists/iommu/msg40416.html
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
Fixes: 942067f1b6 ("iommu/vt-d: Identify default domains replaced with private")
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In some cases like latency[level]==0, wm[level].res_lines>31,
min_ddb_alloc can be U16_MAX, exclude it from the WARN_ON.
v2: Specify the cases in which we hit U16_MAX, indentation (Ville)
Fixes: 10a7e07b68 ("drm/i915: Make sure cursor has enough ddb for the selected wm level")
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191216080619.10945-1-vandita.kulkarni@intel.com
(cherry picked from commit 4ba487019d)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
We've missed the dependency to rsync, so build fails on
minimal containers.
Fixes: 59b2bd05f5 ("kbuild: add 'headers' target to build up uapi headers in usr/include")
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
NULL expressions are taken to always be true, as implemented by the
expr_is_yes() macro and by several other functions in expr.c. As such,
they ought to be valid inputs to expr_eq(), which compares two
expressions.
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit d850c2ee5f ("iommu/vt-d: Expose ISA direct mapping region via
iommu_get_resv_regions") created a direct-mapped reserved memory region
in order to replace the static identity mapping of the ISA address
space, where the latter was then removed in commit df4f3c603a
("iommu/vt-d: Remove static identity map code"). According to the
history of this code and the Kconfig option surrounding it, this direct
mapping exists for the benefit of legacy ISA drivers that are not
compatible with the DMA API.
In conjuntion with commit 9b77e5c798 ("vfio/type1: check dma map
request is within a valid iova range") this change introduced a
regression where the vfio IOMMU backend enforces reserved memory regions
per IOMMU group, preventing userspace from creating IOMMU mappings
conflicting with prescribed reserved regions. A necessary prerequisite
for the vfio change was the introduction of "relaxable" direct mappings
introduced by commit adfd373820 ("iommu: Introduce
IOMMU_RESV_DIRECT_RELAXABLE reserved memory regions"). These relaxable
direct mappings provide the same identity mapping support in the default
domain, but also indicate that the reservation is software imposed and
may be relaxed under some conditions, such as device assignment.
Convert the ISA bridge direct-mapped reserved region to relaxable to
reflect that the restriction is self imposed and need not be enforced
by drivers such as vfio.
Fixes: 1c5c59fbad ("iommu/vt-d: Differentiate relaxable and non relaxable RMRRs")
Cc: stable@vger.kernel.org # v5.3+
Link: https://lore.kernel.org/linux-iommu/20191211082304.2d4fab45@x1.home
Reported-by: cprt <cprt@protonmail.com>
Tested-by: cprt <cprt@protonmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Unseal with wrong auth or wrong policy test affects DA lockout
and eventually causes the tests to fail with:
"ProtocolError: TPM_RC_LOCKOUT: rc=0x00000921"
when the tests run multiple times.
Send tpm clear command after the test to reset the DA counters.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Pavel Begunkov
Jens Axboe
Rob Herring
David S. Miller
Ioana Ciornei
Linus Torvalds
Darrick J. Wong
Jason A. Donenfeld
Daniel Borkmann
Roman Penyaev
Suwan Kim
Erkka Talvitie
zhong jiang
Alexander Shishkin
Takashi Iwai
David Engraf
Sudip Mukherjee
Vincent Guittot
Johannes Weiner
Sebastian Andrzej Siewior
Peter Zijlstra
Ingo Molnar
Jerry Snitselaar
Lu Baolu
Vandita Kulkarni
Enrico Weigelt, metux IT consult
Thomas Hebb
Alex Williamson
Tadeusz Struk