Since ACPI_PTR() is used to NULLify the value when !CONFIG_ACPI,
struct ehci_acpi_match becomes defined by unused.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/ehci-platform.c:478:36: warning: ‘ehci_acpi_match’ defined but not used [-Wunused-const-variable=]
478 | static const struct acpi_device_id ehci_acpi_match[] = {
| ^~~~~~~~~~~~~~~
Cc: Tony Prisk <linux@prisktech.co.nz>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Steven Brown <sbrown@cortland.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: de Goede <hdegoede@redhat.com>
Cc: Michael Buesch <m@bues.ch>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-29-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Demote xhci-dbc's file header to a standard comment block.
Fixes the following W=1 kernel build warning(s):
drivers/usb/early/xhci-dbc.c:10: warning: Function parameter or member 'fmt' not described in 'pr_fmt'
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-28-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the header file containing a function's prototype isn't included by
the sourcefile containing the associated function, the build system
complains of missing prototypes.
Fixes the following W=1 kernel build warning(s):
drivers/usb/early/ehci-dbgp.c: In function ‘early_dbgp_write’:
drivers/usb/early/ehci-dbgp.c:915:13: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
915 | int chunk, ret;
| ^~~
drivers/usb/early/xhci-dbc.c:600:12: warning: no previous prototype for ‘early_xdbc_parse_parameter’ [-Wmissing-prototypes]
600 | int __init early_xdbc_parse_parameter(char *s)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/usb/early/xhci-dbc.c:653:12: warning: no previous prototype for ‘early_xdbc_setup_hardware’ [-Wmissing-prototypes]
653 | int __init early_xdbc_setup_hardware(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/usb/early/xhci-dbc.c:910:13: warning: no previous prototype for ‘early_xdbc_register_console’ [-Wmissing-prototypes]
910 | void __init early_xdbc_register_console(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20200706133341.476881-27-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'ret' hasn't been checked since the driver's inception in 2009.
Fixes the following W=1 kernel build warning(s):
drivers/usb/early/ehci-dbgp.c: In function ‘early_dbgp_write’:
drivers/usb/early/ehci-dbgp.c:915:13: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
915 | int chunk, ret;
| ^~~
Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lore.kernel.org/r/20200706133341.476881-26-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It isn't called from anywhere outside of ucsi.c.
Fixes the following W=1 kernel build warning(s):
drivers/usb/typec/ucsi/ucsi.c:1005:5: warning: no previous prototype for ‘ucsi_init’ [-Wmissing-prototypes]
1005 | int ucsi_init(struct ucsi *ucsi)
| ^~~~~~~~~
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-25-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/max3420_udc.c: In function ‘max3420_handle_setup’:
drivers/usb/gadget/udc/max3420_udc.c:626:5: warning: variable ‘addr’ set but not used [-Wunused-but-set-variable]
626 | u8 addr;
| ^~~~
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-24-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Looks like it's never been used. Driver was mainlined in 2014.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/mv_u3d_core.c:35:19: warning: ‘driver_desc’ defined but not used [-Wunused-const-variable=]
35 | static const char driver_desc[] = DRIVER_DESC;
| ^~~~~~~~~~~
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Jason Yan <yanaijie@huawei.com>
Cc: Yu Xu <yuxu@marvell.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-23-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only 2 functions attempted to use kerneldoc in this massive file.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/fotg210-hcd.c: In function ‘fotg210_run’:
drivers/usb/host/fotg210-hcd.c:5013:6: warning: variable ‘hcc_params’ set but not used [-Wunused-but-set-variable]
drivers/usb/host/fotg210-hcd.c:5569: warning: Function parameter or member 'pdev' not described in 'fotg210_hcd_probe'
drivers/usb/host/fotg210-hcd.c:5666: warning: Function parameter or member 'pdev' not described in 'fotg210_hcd_remove'
drivers/usb/host/fotg210-hcd.c:5666: warning: Excess function parameter 'dev' description in 'fotg210_hcd_remove'
Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com>
Cc: Feng-Hsin Chiang <john453@faraday-tech.com>
Cc: Po-Yu Chuang <ratbert.chuang@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-22-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document either of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/bcma-hcd.c:180: warning: Function parameter or member 'usb_dev' not described in 'bcma_hcd_usb20_old_arm_init'
drivers/usb/host/bcma-hcd.c:268: warning: Function parameter or member 'bcma_hcd' not described in 'bcma_hcd_usb20_ns_init'
Cc: Chuhong Yuan <hslester96@gmail.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Michael Buesch <m@bues.ch>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-21-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document any of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/function/u_uac1_legacy.c:30: warning: Function parameter or member 'i' not described in 'snd_interval_refine_set'
drivers/usb/gadget/function/u_uac1_legacy.c:30: warning: Function parameter or member 'val' not described in 'snd_interval_refine_set'
drivers/usb/gadget/function/u_uac1_legacy.c:93: warning: Function parameter or member 'snd' not described in 'playback_default_hw_params'
drivers/usb/gadget/function/u_uac1_legacy.c:153: warning: Function parameter or member 'card' not described in 'u_audio_playback'
drivers/usb/gadget/function/u_uac1_legacy.c:153: warning: Function parameter or member 'buf' not described in 'u_audio_playback'
drivers/usb/gadget/function/u_uac1_legacy.c:153: warning: Function parameter or member 'count' not described in 'u_audio_playback'
drivers/usb/gadget/function/u_uac1_legacy.c:197: warning: Function parameter or member 'card' not described in 'gaudio_open_snd_dev'
drivers/usb/gadget/function/u_uac1_legacy.c:257: warning: Function parameter or member 'gau' not described in 'gaudio_close_snd_dev'
drivers/usb/gadget/function/u_uac1_legacy.c:286: warning: Function parameter or member 'card' not described in 'gaudio_setup'
drivers/usb/gadget/function/u_uac1_legacy.c:303: warning: Function parameter or member 'the_card' not described in 'gaudio_cleanup'
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-20-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The result is actually read into fotg210->caps->hcc_params. No
need to popuate an unused varible with the unchecked return value
from fotg210_readl().
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/fotg210-hcd.c: In function ‘fotg210_run’:
drivers/usb/host/fotg210-hcd.c:5013:6: warning: variable ‘hcc_params’ set but not used [-Wunused-but-set-variable]
5013 | u32 hcc_params;
| ^~~~~~~~~~
Cc: Yuan-Hsin Chen <yhchen@faraday-tech.com>
Cc: Feng-Hsin Chiang <john453@faraday-tech.com>
Cc: Po-Yu Chuang <ratbert.chuang@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-19-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/ehci-fsl.c:694: warning: Function parameter or member 'pdev' not described in 'fsl_ehci_drv_remove'
drivers/usb/host/ehci-fsl.c:694: warning: Excess function parameter 'dev' description in 'fsl_ehci_drv_remove'
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Randy Vinson <rvinson@mvista.com>
Cc: Dave Liu <daveliu@freescale.com>
Cc: Jerry Huang <Chang-Ming.Huang@freescale.com>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-18-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document the demoted function here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/imx21-hcd.c:233: warning: Function parameter or member 'imx21' not described in 'copy_to_dmem'
drivers/usb/host/imx21-hcd.c:233: warning: Function parameter or member 'dmem_offset' not described in 'copy_to_dmem'
drivers/usb/host/imx21-hcd.c:233: warning: Function parameter or member 'src' not described in 'copy_to_dmem'
drivers/usb/host/imx21-hcd.c:233: warning: Function parameter or member 'count' not described in 'copy_to_dmem'
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Jay Monkman <jtm@lopingdog.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-17-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ranging from missing descriptions and formatting mishaps to over-documenting
of missing arguments, likely due to bitrot.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/pch_udc.c:239: warning: Function parameter or member 'request' not described in 'pch_udc_stp_dma_desc'
drivers/usb/gadget/udc/pch_udc.c:315: warning: Function parameter or member 'irq_work_fall' not described in 'pch_vbus_gpio_data'
drivers/usb/gadget/udc/pch_udc.c:315: warning: Function parameter or member 'irq_work_rise' not described in 'pch_vbus_gpio_data'
drivers/usb/gadget/udc/pch_udc.c:482: warning: Function parameter or member 'ep' not described in 'pch_udc_write_csr'
drivers/usb/gadget/udc/pch_udc.c:482: warning: Excess function parameter 'addr' description in 'pch_udc_write_csr'
drivers/usb/gadget/udc/pch_udc.c:498: warning: Function parameter or member 'ep' not described in 'pch_udc_read_csr'
drivers/usb/gadget/udc/pch_udc.c:498: warning: Excess function parameter 'addr' description in 'pch_udc_read_csr'
drivers/usb/gadget/udc/pch_udc.c:662: warning: Function parameter or member 'ep_in' not described in 'pch_udc_ep_set_bufsz'
drivers/usb/gadget/udc/pch_udc.c:977: warning: Function parameter or member 'ep' not described in 'pch_udc_ep_enable'
drivers/usb/gadget/udc/pch_udc.c:977: warning: Function parameter or member 'cfg' not described in 'pch_udc_ep_enable'
drivers/usb/gadget/udc/pch_udc.c:977: warning: Excess function parameter 'regs' description in 'pch_udc_ep_enable'
drivers/usb/gadget/udc/pch_udc.c:1010: warning: Function parameter or member 'ep' not described in 'pch_udc_ep_disable'
drivers/usb/gadget/udc/pch_udc.c:1010: warning: Excess function parameter 'regs' description in 'pch_udc_ep_disable'
drivers/usb/gadget/udc/pch_udc.c:1030: warning: Function parameter or member 'ep' not described in 'pch_udc_wait_ep_stall'
drivers/usb/gadget/udc/pch_udc.c:1030: warning: Excess function parameter 'dev' description in 'pch_udc_wait_ep_stall'
drivers/usb/gadget/udc/pch_udc.c:1341: warning: Function parameter or member 'data' not described in 'pch_vbus_gpio_irq'
drivers/usb/gadget/udc/pch_udc.c:1341: warning: Excess function parameter 'dev' description in 'pch_vbus_gpio_irq'
drivers/usb/gadget/udc/pch_udc.c:1365: warning: Function parameter or member 'vbus_gpio_port' not described in 'pch_vbus_gpio_init'
drivers/usb/gadget/udc/pch_udc.c:1510: warning: Function parameter or member 'dev' not described in 'pch_udc_free_dma_chain'
drivers/usb/gadget/udc/pch_udc.c:1510: warning: Function parameter or member 'req' not described in 'pch_udc_free_dma_chain'
drivers/usb/gadget/udc/pch_udc.c:1717: warning: Function parameter or member 'usbep' not described in 'pch_udc_pcd_ep_disable'
drivers/usb/gadget/udc/pch_udc.c:2006: warning: Excess function parameter 'halt' description in 'pch_udc_pcd_set_wedge'
drivers/usb/gadget/udc/pch_udc.c:2756: warning: Function parameter or member 'pdev' not described in 'pch_udc_isr'
drivers/usb/gadget/udc/pch_udc.c:2756: warning: Excess function parameter 'dev' description in 'pch_udc_isr'
drivers/usb/gadget/udc/pch_udc.c:2906: warning: Function parameter or member 'dev' not described in 'init_dma_pools'
drivers/usb/gadget/udc/pch_udc.c:2906: warning: Excess function parameter 'pdev' description in 'init_dma_pools'
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Chuhong Yuan <hslester96@gmail.com>
Cc: LAPIS Semiconductor <tomoya-linux@dsn.lapis-semi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-16-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Looks as though it's never been used. Driver was introduced in 2014.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/mv_udc_core.c:56:19: warning: ‘driver_desc’ defined but not used [-Wunused-const-variable=]
56 | static const char driver_desc[] = DRIVER_DESC;
| ^~~~~~~~~~~
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Chao Xie <chao.xie@marvell.com>
Cc: Neil Zhang <zhangwm@marvell.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-15-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Looks like it's been this way since the driver's inception in 2007.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/r8a66597-hcd.c: In function ‘clear_all_buffer’:
drivers/usb/host/r8a66597-hcd.c:478:6: warning: variable ‘tmp’ set but not used [-Wunused-but-set-variable]
478 | u16 tmp;
| ^~~
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-14-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These are not used outside of this sourcefile, so make them static.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/lpc32xx_udc.c:1929:6: warning: no previous prototype for ‘udc_send_in_zlp’ [-Wmissing-prototypes]
1929 | void udc_send_in_zlp(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
| ^~~~~~~~~~~~~~~
drivers/usb/gadget/udc/lpc32xx_udc.c:1943:6: warning: no previous prototype for ‘udc_handle_eps’ [-Wmissing-prototypes]
1943 | void udc_handle_eps(struct lpc32xx_udc *udc, struct lpc32xx_ep *ep)
| ^~~~~~~~~~~~~~
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Sylvain Lemieux <slemieux.tyco@gmail.com>
Cc: Kevin Wells <kevin.wells@nxp.com>
Cc: Roland Stigge <stigge@antcom.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://lore.kernel.org/r/20200706133341.476881-13-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document the demoted function here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/function/f_fs.c:2361: warning: Function parameter or member 'type' not described in '__ffs_data_do_os_desc'
drivers/usb/gadget/function/f_fs.c:2361: warning: Function parameter or member 'h' not described in '__ffs_data_do_os_desc'
drivers/usb/gadget/function/f_fs.c:2361: warning: Function parameter or member 'data' not described in '__ffs_data_do_os_desc'
drivers/usb/gadget/function/f_fs.c:2361: warning: Function parameter or member 'len' not described in '__ffs_data_do_os_desc'
drivers/usb/gadget/function/f_fs.c:2361: warning: Function parameter or member 'priv' not described in '__ffs_data_do_os_desc'
Cc: Felipe Balbi <balbi@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-12-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Looks as though it's never been used. Driver was introduced in 2010.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/legacy/nokia.c:65:19: warning: ‘product_nokia’ defined but not used [-Wunused-const-variable=]
65 | static const char product_nokia[] = NOKIA_LONG_NAME;
| ^~~~~~~~~~~~~
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Al Borchers <alborchers@steinerpoint.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-11-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit e78355b577 ("usb: gadget: udc: atmel: Don't use DT to
configure end point") pulled out all functionality dealing with 'pp'.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/atmel_usba_udc.c: In function ‘atmel_udc_of_init’:
drivers/usb/gadget/udc/atmel_usba_udc.c:2106:22: warning: variable ‘pp’ set but not used [-Wunused-but-set-variable]
2106 | struct device_node *pp;
| ^~
Cc: Cristian Birsan <cristian.birsan@microchip.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-10-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/misc/legousbtower.c:280: warning: Function parameter or member 'dev' not described in 'lego_usb_tower_debug_data'
drivers/usb/misc/legousbtower.c:280: warning: Function parameter or member 'function' not described in 'lego_usb_tower_debug_data'
drivers/usb/misc/legousbtower.c:280: warning: Function parameter or member 'size' not described in 'lego_usb_tower_debug_data'
drivers/usb/misc/legousbtower.c:280: warning: Function parameter or member 'data' not described in 'lego_usb_tower_debug_data'
Cc: Juergen Stuber <starblue@users.sourceforge.net>
Cc: David Glance <davidgsf@sourceforge.net>
Cc: david <david@csse.uwa.edu.au>
Cc: legousb-devel@lists.sourceforge.net
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-8-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mostly bitrotted argument descriptions/names. Also the removal
of a blank line in the middle of a kerneldoc header, which is
not allowed.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/pxa27x_udc.c:398: warning: Function parameter or member 'ep' not described in 'ep_write_UDCCSR'
drivers/usb/gadget/udc/pxa27x_udc.c:398: warning: Excess function parameter 'udc' description in 'ep_write_UDCCSR'
drivers/usb/gadget/udc/pxa27x_udc.c:479: warning: Function parameter or member 'udc' not described in 'set_ep0state'
drivers/usb/gadget/udc/pxa27x_udc.c:479: warning: Excess function parameter 'dev' description in 'set_ep0state'
drivers/usb/gadget/udc/pxa27x_udc.c:506: warning: Excess function parameter 'req' description in 'inc_ep_stats_reqs'
drivers/usb/gadget/udc/pxa27x_udc.c:1476: warning: bad line:
drivers/usb/gadget/udc/pxa27x_udc.c:1697: warning: Function parameter or member 'udc' not described in 'udc_enable'
drivers/usb/gadget/udc/pxa27x_udc.c:1697: warning: Excess function parameter 'dev' description in 'udc_enable'
drivers/usb/gadget/udc/pxa27x_udc.c:1750: warning: Function parameter or member 'g' not described in 'pxa27x_udc_start'
drivers/usb/gadget/udc/pxa27x_udc.c:1750: warning: Excess function parameter 'bind' description in 'pxa27x_udc_start'
drivers/usb/gadget/udc/pxa27x_udc.c:1784: warning: Excess function parameter 'driver' description in 'stop_activity'
drivers/usb/gadget/udc/pxa27x_udc.c:1800: warning: Function parameter or member 'g' not described in 'pxa27x_udc_stop'
drivers/usb/gadget/udc/pxa27x_udc.c:1800: warning: Excess function parameter 'driver' description in 'pxa27x_udc_stop'
drivers/usb/gadget/udc/pxa27x_udc.c:2358: warning: Function parameter or member 'pdev' not described in 'pxa_udc_probe'
drivers/usb/gadget/udc/pxa27x_udc.c:2358: warning: Excess function parameter '_dev' description in 'pxa_udc_probe'
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-7-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kerneldoc expects all function arguments to be documented. If any
are missed it will complain. Downgrade one header with 3 missing
argument descriptions and one which makes no attempt.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/function/u_ether.c:750: warning: Function parameter or member 'dev_addr' not described in 'gether_setup_name'
drivers/usb/gadget/function/u_ether.c:750: warning: Function parameter or member 'host_addr' not described in 'gether_setup_name'
drivers/usb/gadget/function/u_ether.c:750: warning: Function parameter or member 'qmult' not described in 'gether_setup_name'
drivers/usb/gadget/function/u_ether.c:1022: warning: Function parameter or member 'dev' not described in 'gether_cleanup'
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-6-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/amd5536udc_pci.c:52:19: warning: ‘mod_desc’ defined but not used [-Wunused-const-variable=]
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-5-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/legacy/printer.c:24:19: warning: ‘driver_desc’ defined but not used [-Wunused-const-variable=]
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-4-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document any of the structure's properties here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/chipidea/ci_hdrc_pci.c:132: warning: cannot understand function prototype: 'const struct pci_device_id ci_hdrc_pci_id_table[] = '
Cc: Peter Chen <Peter.Chen@nxp.com>
Cc: David Lopo <dlopo@chipidea.mips.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-3-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document any of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/misc/legousbtower.c:280: warning: Function parameter or member 'dev' not described in 'lego_usb_tower_debug_data'
drivers/usb/misc/legousbtower.c:280: warning: Function parameter or member 'function' not described in 'lego_usb_tower_debug_data'
drivers/usb/misc/legousbtower.c:280: warning: Function parameter or member 'size' not described in 'lego_usb_tower_debug_data'
drivers/usb/misc/legousbtower.c:280: warning: Function parameter or member 'data' not described in 'lego_usb_tower_debug_data'
drivers/usb/misc/legousbtower.c:290: warning: Function parameter or member 'dev' not described in 'tower_delete'
drivers/usb/misc/legousbtower.c:306: warning: Function parameter or member 'inode' not described in 'tower_open'
drivers/usb/misc/legousbtower.c:306: warning: Function parameter or member 'file' not described in 'tower_open'
drivers/usb/misc/legousbtower.c:405: warning: Function parameter or member 'inode' not described in 'tower_release'
drivers/usb/misc/legousbtower.c:405: warning: Function parameter or member 'file' not described in 'tower_release'
drivers/usb/misc/legousbtower.c:452: warning: Function parameter or member 'dev' not described in 'tower_check_for_read_packet'
drivers/usb/misc/legousbtower.c:468: warning: Function parameter or member 'file' not described in 'tower_poll'
drivers/usb/misc/legousbtower.c:468: warning: Function parameter or member 'wait' not described in 'tower_poll'
drivers/usb/misc/legousbtower.c:494: warning: Function parameter or member 'file' not described in 'tower_llseek'
drivers/usb/misc/legousbtower.c:494: warning: Function parameter or member 'off' not described in 'tower_llseek'
drivers/usb/misc/legousbtower.c:494: warning: Function parameter or member 'whence' not described in 'tower_llseek'
drivers/usb/misc/legousbtower.c:503: warning: Function parameter or member 'file' not described in 'tower_read'
drivers/usb/misc/legousbtower.c:503: warning: Function parameter or member 'buffer' not described in 'tower_read'
drivers/usb/misc/legousbtower.c:503: warning: Function parameter or member 'count' not described in 'tower_read'
drivers/usb/misc/legousbtower.c:503: warning: Function parameter or member 'ppos' not described in 'tower_read'
drivers/usb/misc/legousbtower.c:587: warning: Function parameter or member 'file' not described in 'tower_write'
drivers/usb/misc/legousbtower.c:587: warning: Function parameter or member 'buffer' not described in 'tower_write'
drivers/usb/misc/legousbtower.c:587: warning: Function parameter or member 'count' not described in 'tower_write'
drivers/usb/misc/legousbtower.c:587: warning: Function parameter or member 'ppos' not described in 'tower_write'
drivers/usb/misc/legousbtower.c:669: warning: Function parameter or member 'urb' not described in 'tower_interrupt_in_callback'
drivers/usb/misc/legousbtower.c:724: warning: Function parameter or member 'urb' not described in 'tower_interrupt_out_callback'
drivers/usb/misc/legousbtower.c:752: warning: Function parameter or member 'interface' not described in 'tower_probe'
drivers/usb/misc/legousbtower.c:752: warning: Function parameter or member 'id' not described in 'tower_probe'
drivers/usb/misc/legousbtower.c:863: warning: Function parameter or member 'interface' not described in 'tower_disconnect'
Cc: Juergen Stuber <starblue@users.sourceforge.net>
Cc: David Glance <davidgsf@sourceforge.net>
Cc: david <david@csse.uwa.edu.au>
Cc: legousb-devel@lists.sourceforge.net
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200706133341.476881-2-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An attempt was made to document the functions in 'dummy_hcd',
but a simple spelling mistake was made.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/dummy_hcd.c:1597: warning: Function parameter or member 'dum_hcd' not described in 'handle_control_request'
drivers/usb/gadget/udc/dummy_hcd.c:1597: warning: Excess function parameter 'dum' description in 'handle_control_request'
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-31-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document any of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/musb/musb_dsps.c:44: warning: cannot understand function prototype: 'struct dsps_musb_wrapper '
drivers/usb/musb/musb_dsps.c:102: warning: cannot understand function prototype: 'struct dsps_glue '
drivers/usb/musb/musb_dsps.c:169: warning: Function parameter or member 'musb' not described in 'dsps_musb_enable'
drivers/usb/musb/musb_dsps.c:195: warning: Function parameter or member 'musb' not described in 'dsps_musb_disable'
Cc: Bin Liu <b-liu@ti.com>
Cc: Ravi B <ravibabu@ti.com>
Cc: Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-29-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document any of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/misc/ldusb.c:192: warning: Function parameter or member 'dev' not described in 'ld_usb_abort_transfers'
drivers/usb/misc/ldusb.c:206: warning: Function parameter or member 'dev' not described in 'ld_usb_delete'
drivers/usb/misc/ldusb.c:220: warning: Function parameter or member 'urb' not described in 'ld_usb_interrupt_in_callback'
drivers/usb/misc/ldusb.c:281: warning: Function parameter or member 'urb' not described in 'ld_usb_interrupt_out_callback'
drivers/usb/misc/ldusb.c:301: warning: Function parameter or member 'inode' not described in 'ld_usb_open'
drivers/usb/misc/ldusb.c:301: warning: Function parameter or member 'file' not described in 'ld_usb_open'
drivers/usb/misc/ldusb.c:372: warning: Function parameter or member 'inode' not described in 'ld_usb_release'
drivers/usb/misc/ldusb.c:372: warning: Function parameter or member 'file' not described in 'ld_usb_release'
drivers/usb/misc/ldusb.c:414: warning: Function parameter or member 'file' not described in 'ld_usb_poll'
drivers/usb/misc/ldusb.c:414: warning: Function parameter or member 'wait' not described in 'ld_usb_poll'
drivers/usb/misc/ldusb.c:439: warning: Function parameter or member 'file' not described in 'ld_usb_read'
drivers/usb/misc/ldusb.c:439: warning: Function parameter or member 'buffer' not described in 'ld_usb_read'
drivers/usb/misc/ldusb.c:439: warning: Function parameter or member 'count' not described in 'ld_usb_read'
drivers/usb/misc/ldusb.c:439: warning: Function parameter or member 'ppos' not described in 'ld_usb_read'
drivers/usb/misc/ldusb.c:526: warning: Function parameter or member 'file' not described in 'ld_usb_write'
drivers/usb/misc/ldusb.c:526: warning: Function parameter or member 'buffer' not described in 'ld_usb_write'
drivers/usb/misc/ldusb.c:526: warning: Function parameter or member 'count' not described in 'ld_usb_write'
drivers/usb/misc/ldusb.c:526: warning: Function parameter or member 'ppos' not described in 'ld_usb_write'
drivers/usb/misc/ldusb.c:651: warning: Function parameter or member 'intf' not described in 'ld_usb_probe'
drivers/usb/misc/ldusb.c:651: warning: Function parameter or member 'id' not described in 'ld_usb_probe'
drivers/usb/misc/ldusb.c:754: warning: Function parameter or member 'intf' not described in 'ld_usb_disconnect'
Cc: Johan Hovold <johan@kernel.org>
Cc: Michael Hund <mhund@ld-didactic.de>
Cc: David Glance <advidgsf@sourceforge.net>
Cc: Juergen Stuber <starblue@users.sourceforge.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-28-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Looks as though this has been an issue since the driver's
inception back in 2014.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/function/u_serial.c:538: warning: Function parameter or member 'port' not described in 'gs_start_io'
drivers/usb/gadget/function/u_serial.c:538: warning: Excess function parameter 'dev' description in 'gs_start_io'
Cc: Felipe Balbi <balbi@kernel.org>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: Al Borchers <alborchers@steinerpoint.com>
Cc: Peter Berger <pberger@brimson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-27-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document any of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/misc/iowarrior.c:251: warning: Function parameter or member 'dev' not described in 'iowarrior_delete'
drivers/usb/misc/iowarrior.c:279: warning: Function parameter or member 'file' not described in 'iowarrior_read'
drivers/usb/misc/iowarrior.c:279: warning: Function parameter or member 'buffer' not described in 'iowarrior_read'
drivers/usb/misc/iowarrior.c:279: warning: Function parameter or member 'count' not described in 'iowarrior_read'
drivers/usb/misc/iowarrior.c:279: warning: Function parameter or member 'ppos' not described in 'iowarrior_read'
drivers/usb/misc/iowarrior.c:483: warning: Function parameter or member 'file' not described in 'iowarrior_ioctl'
drivers/usb/misc/iowarrior.c:483: warning: Function parameter or member 'cmd' not described in 'iowarrior_ioctl'
drivers/usb/misc/iowarrior.c:483: warning: Function parameter or member 'arg' not described in 'iowarrior_ioctl'
drivers/usb/misc/iowarrior.c:599: warning: Function parameter or member 'inode' not described in 'iowarrior_open'
drivers/usb/misc/iowarrior.c:599: warning: Function parameter or member 'file' not described in 'iowarrior_open'
drivers/usb/misc/iowarrior.c:647: warning: Function parameter or member 'inode' not described in 'iowarrior_release'
drivers/usb/misc/iowarrior.c:647: warning: Function parameter or member 'file' not described in 'iowarrior_release'
drivers/usb/misc/iowarrior.c:753: warning: Function parameter or member 'interface' not described in 'iowarrior_probe'
drivers/usb/misc/iowarrior.c:753: warning: Function parameter or member 'id' not described in 'iowarrior_probe'
drivers/usb/misc/iowarrior.c:879: warning: Function parameter or member 'interface' not described in 'iowarrior_disconnect'
Cc: Johan Hovold <johan@kernel.org>
Cc: Christian Lucht <lucht@codemercs.com>
Cc: Stephane Dalton <sdalton@videotron.ca>
Cc: Stephane Doyon <s.doyon@videotron.ca>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-26-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Looks although Stephane's name was corrupted somehow.
Cc: Johan Hovold <johan@kernel.org>
Cc: Christian Lucht <lucht@codemercs.com>
Cc: Stephane Dalton <sdalton@videotron.ca>
Cc: Stephane Doyon <s.doyon@videotron.ca>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-25-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document the demoted function here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/chipidea/usbmisc_imx.c:801: warning: Function parameter or member 'data' not described in 'imx7d_charger_detection'
Cc: Peter Chen <Peter.Chen@nxp.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Richard Zhao <richard.zhao@freescale.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-24-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/typec/tcpm/fusb302.c: In function ‘fusb302_log’:
drivers/usb/typec/tcpm/fusb302.c:186:2: warning: function ‘fusb302_log’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
186 | _fusb302_log(chip, fmt, args);
| ^~~~~~~~~~~~
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Yueyao Zhu <yueyao.zhu@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200703174148.2749969-23-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the header file containing a function's prototype isn't included by
the sourcefile containing the associated function, the build system
complains of missing prototypes.
Fixes the following W=1 kernel build warning(s):
drivers/usb/typec/altmodes/displayport.c:511:5: warning: no previous prototype for ‘dp_altmode_probe’ [-Wmissing-prototypes]
drivers/usb/typec/altmodes/displayport.c:551:6: warning: no previous prototype for ‘dp_altmode_remove’ [-Wmissing-prototypes]
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-22-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Demote displayport's file header to a standard comment block.
Fixes the following W=1 kernel build warning(s):
drivers/usb/typec/altmodes/displayport.c:18: warning: Function parameter or member '_dp' not described in 'DP_HEADER'
drivers/usb/typec/altmodes/displayport.c:18: warning: Function parameter or member 'cmd' not described in 'DP_HEADER'
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-21-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The return value of alauda_get_media_status() hasn't been checked
since the driver's inception back in 2005. If nothing have gone
wrong/been detected until this point, it's probably safe to just
remove the variable.
Fixes the following W=1 kernel build warning(s):
drivers/usb/storage/alauda.c: In function ‘alauda_check_media’:
drivers/usb/storage/alauda.c:456:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
456 | int rc;
| ^~
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Daniel Drake <dsd@gentoo.org>
Cc: usb-storage@lists.one-eyed-alien.net
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-20-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/xhci-debugfs.c:128:2: warning: function ‘xhci_debugfs_regset’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
128 | vsnprintf(rgs->name, sizeof(rgs->name), fmt, args);
| ^~~~~~~~~
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-19-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Descriptions were missing for 'ci' almost throughout. There was
one instance of over-documenting. Finally one function argument
was incorrectly documented (probably down to bitrot).
Fixes the following W=1 kernel build warning(s):
drivers/usb/chipidea/udc.c:245: warning: Function parameter or member 'ci' not described in 'hw_port_is_high_speed'
drivers/usb/chipidea/udc.c:271: warning: Function parameter or member 'ci' not described in 'hw_test_and_clear_intr_active'
drivers/usb/chipidea/udc.c:285: warning: Function parameter or member 'ci' not described in 'hw_test_and_clear_setup_guard'
drivers/usb/chipidea/udc.c:296: warning: Function parameter or member 'ci' not described in 'hw_test_and_set_setup_guard'
drivers/usb/chipidea/udc.c:321: warning: Function parameter or member 'ci' not described in 'hw_usb_reset'
drivers/usb/chipidea/udc.c:628: warning: Excess function parameter 'ci' description in 'free_pending_td'
drivers/usb/chipidea/udc.c:655: warning: Function parameter or member 'hwep' not described in '_hardware_dequeue'
drivers/usb/chipidea/udc.c:655: warning: Excess function parameter 'gadget' description in '_hardware_dequeue'
Cc: Peter Chen <Peter.Chen@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-18-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Demote xhci-dbgtty's file header to a standard comment block.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/xhci-dbgtty.c:19: warning: Function parameter or member 'port' not described in 'dbc_send_packet'
drivers/usb/host/xhci-dbgtty.c:19: warning: Function parameter or member 'packet' not described in 'dbc_send_packet'
drivers/usb/host/xhci-dbgtty.c:19: warning: Function parameter or member 'size' not described in 'dbc_send_packet'
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-17-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Demote xhci-dbgcap's file header to a standard comment block.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/xhci-dbgcap.c:20: warning: Function parameter or member 'xhci' not described in 'dbc_dma_alloc_coherent'
drivers/usb/host/xhci-dbgcap.c:20: warning: Function parameter or member 'size' not described in 'dbc_dma_alloc_coherent'
drivers/usb/host/xhci-dbgcap.c:20: warning: Function parameter or member 'dma_handle' not described in 'dbc_dma_alloc_coherent'
drivers/usb/host/xhci-dbgcap.c:20: warning: Function parameter or member 'flags' not described in 'dbc_dma_alloc_coherent'
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-16-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document the demoted function here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/xhci-mem.c:365: warning: Function parameter or member 'xhci' not described in 'xhci_ring_alloc'
drivers/usb/host/xhci-mem.c:365: warning: Function parameter or member 'num_segs' not described in 'xhci_ring_alloc'
drivers/usb/host/xhci-mem.c:365: warning: Function parameter or member 'cycle_state' not described in 'xhci_ring_alloc'
drivers/usb/host/xhci-mem.c:365: warning: Function parameter or member 'type' not described in 'xhci_ring_alloc'
drivers/usb/host/xhci-mem.c:365: warning: Function parameter or member 'max_packet' not described in 'xhci_ring_alloc'
drivers/usb/host/xhci-mem.c:365: warning: Function parameter or member 'flags' not described in 'xhci_ring_alloc'
Cc: Mathias Nyman <mathias.nyman@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-15-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document the demoted function here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/host/xhci.c:1285: warning: Function parameter or member 'desc' not described in 'xhci_get_endpoint_index'
Cc: Mathias Nyman <mathias.nyman@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-14-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Help with adding the odd description where they have been omitted or
where the format isn't quite right. Demote all function headers which
are lacking any attempt of describing their arguments.
Fixes the following W=1 kernel build warning(s):
drivers/usb/chipidea/udc.c:645: warning: Function parameter or member 'hwreq' not described in '_hardware_dequeue'
drivers/usb/chipidea/udc.c:645: warning: Excess function parameter 'gadget' description in '_hardware_dequeue'
drivers/usb/chipidea/udc.c:1326: warning: Function parameter or member 'ep' not described in 'ep_enable'
drivers/usb/chipidea/udc.c:1326: warning: Function parameter or member 'desc' not described in 'ep_enable'
drivers/usb/chipidea/udc.c:1393: warning: Function parameter or member 'ep' not described in 'ep_disable'
drivers/usb/chipidea/udc.c:1433: warning: Function parameter or member 'ep' not described in 'ep_alloc_request'
drivers/usb/chipidea/udc.c:1433: warning: Function parameter or member 'gfp_flags' not described in 'ep_alloc_request'
drivers/usb/chipidea/udc.c:1454: warning: Function parameter or member 'ep' not described in 'ep_free_request'
drivers/usb/chipidea/udc.c:1454: warning: Function parameter or member 'req' not described in 'ep_free_request'
drivers/usb/chipidea/udc.c:1488: warning: Function parameter or member 'ep' not described in 'ep_queue'
drivers/usb/chipidea/udc.c:1488: warning: Function parameter or member 'req' not described in 'ep_queue'
drivers/usb/chipidea/udc.c:1488: warning: Function parameter or member 'gfp_flags' not described in 'ep_queue'
drivers/usb/chipidea/udc.c:1512: warning: Function parameter or member 'ep' not described in 'ep_dequeue'
drivers/usb/chipidea/udc.c:1512: warning: Function parameter or member 'req' not described in 'ep_dequeue'
drivers/usb/chipidea/udc.c:1556: warning: Function parameter or member 'ep' not described in 'ep_set_halt'
drivers/usb/chipidea/udc.c:1556: warning: Function parameter or member 'value' not described in 'ep_set_halt'
drivers/usb/chipidea/udc.c:1566: warning: Function parameter or member 'ep' not described in 'ep_set_wedge'
drivers/usb/chipidea/udc.c:1586: warning: Function parameter or member 'ep' not described in 'ep_fifo_flush'
drivers/usb/chipidea/udc.c:1610: warning: cannot understand function prototype: 'const struct usb_ep_ops usb_ep_ops = '
drivers/usb/chipidea/udc.c:1629: warning: Function parameter or member '_gadget' not described in 'ci_hdrc_gadget_connect'
drivers/usb/chipidea/udc.c:1629: warning: Function parameter or member 'is_active' not described in 'ci_hdrc_gadget_connect'
drivers/usb/chipidea/udc.c:1780: warning: cannot understand function prototype: 'const struct usb_gadget_ops usb_gadget_ops = '
drivers/usb/chipidea/udc.c:1931: warning: Function parameter or member 'gadget' not described in 'ci_udc_stop'
drivers/usb/chipidea/udc.c:1965: warning: Function parameter or member 'ci' not described in 'udc_irq'
drivers/usb/chipidea/udc.c:2095: warning: Function parameter or member 'ci' not described in 'ci_hdrc_gadget_destroy'
drivers/usb/chipidea/udc.c:2144: warning: Function parameter or member 'ci' not described in 'ci_hdrc_gadget_init'
Cc: Peter Chen <Peter.Chen@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-13-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Looks like a very popular argument to omit descriptions for.
Fixes the following W=1 kernel build warning(s):
drivers/usb/chipidea/udc.c:80: warning: Function parameter or member 'ci' not described in 'hw_device_state'
drivers/usb/chipidea/udc.c💯 warning: Function parameter or member 'ci' not described in 'hw_ep_flush'
drivers/usb/chipidea/udc.c:121: warning: Function parameter or member 'ci' not described in 'hw_ep_disable'
drivers/usb/chipidea/udc.c:136: warning: Function parameter or member 'ci' not described in 'hw_ep_enable'
drivers/usb/chipidea/udc.c:170: warning: Function parameter or member 'ci' not described in 'hw_ep_get_halt'
drivers/usb/chipidea/udc.c:185: warning: Function parameter or member 'ci' not described in 'hw_ep_prime'
drivers/usb/chipidea/udc.c:215: warning: Function parameter or member 'ci' not described in 'hw_ep_set_halt'
drivers/usb/chipidea/udc.c:238: warning: Function parameter or member 'ci' not described in 'hw_port_is_high_speed'
drivers/usb/chipidea/udc.c:251: warning: Function parameter or member 'ci' not described in 'hw_test_and_clear_complete'
drivers/usb/chipidea/udc.c:263: warning: Function parameter or member 'ci' not described in 'hw_test_and_clear_intr_active'
drivers/usb/chipidea/udc.c:277: warning: Function parameter or member 'ci' not described in 'hw_test_and_clear_setup_guard'
drivers/usb/chipidea/udc.c:288: warning: Function parameter or member 'ci' not described in 'hw_test_and_set_setup_guard'
drivers/usb/chipidea/udc.c:300: warning: Function parameter or member 'ci' not described in 'hw_usb_set_address'
drivers/usb/chipidea/udc.c:312: warning: Function parameter or member 'ci' not described in 'hw_usb_reset'
Cc: Peter Chen <Peter.Chen@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-12-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt has been made to document any of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/usb/chipidea/debug.c:25: warning: Function parameter or member 's' not described in 'ci_device_show'
drivers/usb/chipidea/debug.c:25: warning: Function parameter or member 'data' not described in 'ci_device_show'
drivers/usb/chipidea/debug.c:54: warning: Function parameter or member 's' not described in 'ci_port_test_show'
drivers/usb/chipidea/debug.c:54: warning: Function parameter or member 'data' not described in 'ci_port_test_show'
drivers/usb/chipidea/debug.c:75: warning: Function parameter or member 'file' not described in 'ci_port_test_write'
drivers/usb/chipidea/debug.c:75: warning: Function parameter or member 'ubuf' not described in 'ci_port_test_write'
drivers/usb/chipidea/debug.c:75: warning: Function parameter or member 'count' not described in 'ci_port_test_write'
drivers/usb/chipidea/debug.c:75: warning: Function parameter or member 'ppos' not described in 'ci_port_test_write'
drivers/usb/chipidea/debug.c:122: warning: Function parameter or member 's' not described in 'ci_qheads_show'
drivers/usb/chipidea/debug.c:122: warning: Function parameter or member 'data' not described in 'ci_qheads_show'
drivers/usb/chipidea/debug.c:154: warning: Function parameter or member 's' not described in 'ci_requests_show'
drivers/usb/chipidea/debug.c:154: warning: Function parameter or member 'data' not described in 'ci_requests_show'
Cc: Peter Chen <Peter.Chen@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-11-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Firstly we add some missing descriptions. Then we fix some formatting
issues. Kerneldoc expects arguments to be in the format '@.*: '. If
either the '@' or ':' is omitted, kerneldoc gets confused.
Fixes the following W=1 kernel build warning(s):
drivers/usb/chipidea/otg.c:29: warning: Function parameter or member 'ci' not described in 'hw_read_otgsc'
drivers/usb/chipidea/otg.c:82: warning: Function parameter or member 'ci' not described in 'hw_write_otgsc'
drivers/usb/chipidea/otg.c:235: warning: Function parameter or member 'ci' not described in 'ci_hdrc_otg_init'
drivers/usb/chipidea/otg.c:254: warning: Function parameter or member 'ci' not described in 'ci_hdrc_otg_destroy'
Cc: Peter Chen <Peter.Chen@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-10-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Firstly, file headers should not be in kerneldoc format. Function
args should be in the format '@.*: '. We also take the time to
add some descriptions for various argument which have been
previously left out. Finally we remove descriptions for absent
arguments.
Fixes the following W=1 kernel build warning(s):
drivers/usb/gadget/udc/core.c:25: warning: Incorrect use of kernel-doc format: * struct usb_udc - describes one usb device controller
drivers/usb/gadget/udc/core.c:36: warning: cannot understand function prototype: 'struct usb_udc '
drivers/usb/gadget/udc/core.c:901: warning: Function parameter or member 'ep' not described in 'usb_gadget_giveback_request'
drivers/usb/gadget/udc/core.c:901: warning: Function parameter or member 'req' not described in 'usb_gadget_giveback_request'
drivers/usb/gadget/udc/core.c:1098: warning: Function parameter or member 'udc' not described in 'usb_gadget_udc_stop'
drivers/usb/gadget/udc/core.c:1098: warning: Excess function parameter 'gadget' description in 'usb_gadget_udc_stop'
drivers/usb/gadget/udc/core.c:1098: warning: Excess function parameter 'driver' description in 'usb_gadget_udc_stop'
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-9-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/usb/chipidea/core.c:163: warning: Function parameter or member 'ci' not described in 'hw_port_test_set'
Cc: Peter Chen <Peter.Chen@nxp.com>
Cc: David Lopo <dlopo@chipidea.mips.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200703174148.2749969-8-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lee Jones