Here is one small sysfs change, and a documentation update for 5.0-rc2
The sysfs change moves from using BUG_ON to WARN_ON, as discussed in an
email thread on lkml while trying to track down another driver bug.
sysfs should not be crashing and preventing people from seeing where
they went wrong. Now it properly recovers and warns the developer.
The documentation update removes the use of BUS_ATTR() as the kernel is
moving away from this to use the specific BUS_ATTR_RW() and friends
instead. There are pending patches in all of the different subsystems
to remove the last users of this macro, but for now, don't advertise it
should be used anymore to keep new ones from being introduced.
Both have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXDsRFA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynbgACfTY/rAZpWTgMdPDfoOmF+s/XHQXsAoJKZ+v+f
Tpkcw76Wo1ESpPLuT1u1
=W0D+
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here is one small sysfs change, and a documentation update for 5.0-rc2
The sysfs change moves from using BUG_ON to WARN_ON, as discussed in
an email thread on lkml while trying to track down another driver bug.
sysfs should not be crashing and preventing people from seeing where
they went wrong. Now it properly recovers and warns the developer.
The documentation update removes the use of BUS_ATTR() as the kernel
is moving away from this to use the specific BUS_ATTR_RW() and friends
instead. There are pending patches in all of the different subsystems
to remove the last users of this macro, but for now, don't advertise
it should be used anymore to keep new ones from being introduced.
Both have been in linux-next with no reported issues"
* tag 'driver-core-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Documentation: driver core: remove use of BUS_ATTR
sysfs: convert BUG_ON to WARN_ON
Here are some small staging driver fixes for some reported issues.
One reverts a patch that was made to the rtl8723bs driver that turned
out to not be needed at all as it was a bug in clang. The others fix up
some reported issues in the rtl8188eu driver and update the MAINTAINERS
file to point to Larry for this driver so he can get the bug reports
easier.
All have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXDsPnQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ympdgCfVGVVapWxNgyjKe0oZNFQpF+bMAsAoNXmPbcd
8ETJe7SzfNH6mjmnw80F
=LZmR
-----END PGP SIGNATURE-----
Merge tag 'staging-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for some reported issues.
One reverts a patch that was made to the rtl8723bs driver that turned
out to not be needed at all as it was a bug in clang. The others fix
up some reported issues in the rtl8188eu driver and update the
MAINTAINERS file to point to Larry for this driver so he can get the
bug reports easier.
All have been in linux-next with no reported issues"
* tag 'staging-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
Revert "staging: rtl8723bs: Mark ACPI table declaration as used"
staging: rtl8188eu: Fix module loading from tasklet for WEP encryption
staging: rtl8188eu: Fix module loading from tasklet for CCMP encryption
MAINTAINERS: Add entry for staging driver r8188eu
Here are 2 tty and serial fixes for 5.0-rc2 that resolve some reported
issues.
The first is a simple serial driver fix for a regression that showed up
in 5.0-rc1. The second one resolves a number of reported issues with
the recent tty locking fixes that went into 5.0-rc1. Lots of people
have tested the second one and say it resolves their issues.
Both have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXDsOzA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl8OACgg3KREaqF3vizmxVr3xzKk2xG7x0An28XJcYA
z95ZRO/BuSATH1kTM36D
=p+SA
-----END PGP SIGNATURE-----
Merge tag 'tty-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are 2 tty and serial fixes for 5.0-rc2 that resolve some reported
issues.
The first is a simple serial driver fix for a regression that showed
up in 5.0-rc1. The second one resolves a number of reported issues
with the recent tty locking fixes that went into 5.0-rc1. Lots of
people have tested the second one and say it resolves their issues.
Both have been in linux-next with no reported issues"
* tag 'tty-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: Don't hold ldisc lock in tty_reopen() if ldisc present
serial: lantiq: Do not swap register read/writes
Here are some small USB driver fixes and quirk updates for 5.0-rc2.
The majority here are some quirks for some storage devices to get them
to work properly. There's also a fix here to resolve the reported
issues with some audio devices that say they are UAC3 compliant, but
really are not.
And a fix up for the MAINTAINERS file to remove a dead url.
All have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXDsQMA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykM2wCgzC1E5NUpoCqPZHaYQ/0LNLm6SaEAoIbebWBo
rl39FeUBmPJLTmKD0pFX
=4K55
-----END PGP SIGNATURE-----
Merge tag 'usb-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes and quirk updates for 5.0-rc2.
The majority here are some quirks for some storage devices to get them
to work properly. There's also a fix here to resolve the reported
issues with some audio devices that say they are UAC3 compliant, but
really are not.
And a fix up for the MAINTAINERS file to remove a dead url.
All have been in linux-next with no reported issues"
* tag 'usb-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: storage: Remove outdated URL from MAINTAINERS
USB: Add USB_QUIRK_DELAY_CTRL_MSG quirk for Corsair K70 RGB
usbcore: Select only first configuration for non-UAC3 compliant devices
USB: storage: add quirk for SMI SM3350
USB: storage: don't insert sane sense for SPC3+ when bad sense specified
usb: cdc-acm: send ZLP for Telit 3G Intel based modems
-----BEGIN PGP SIGNATURE-----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=410H
-----END PGP SIGNATURE-----
Merge tag '5.0-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"A set of cifs/smb3 fixes, 4 for stable, most from Pavel. His patches
fix an important set of crediting (flow control) problems, and also
two problems in cifs_writepages, ddressing some large i/o and also
compounding issues"
* tag '5.0-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module version number
CIFS: Fix error paths in writeback code
CIFS: Move credit processing to mid callbacks for SMB3
CIFS: Fix credits calculation for cancelled requests
cifs: Fix potential OOB access of lock element array
cifs: Limit memory used by lock request calls to a page
cifs: move large array from stack to heap
CIFS: Do not hide EINTR after sending network packets
CIFS: Fix credit computation for compounded requests
CIFS: Do not set credits to 1 if the server didn't grant anything
CIFS: Fix adjustment of credits for MTU requests
cifs: Fix a tiny potential memory leak
cifs: Fix a debug message
This adds missing deassert functionality to the ARC HSDK reset driver,
fixes some indentation and grammar issues in the kernel docs, adds a
helper to count the number of resets on a device for the non-DT case
as well, adds an early reset driver for SoCFPGA and simple reset driver
support for Stratix10, and generalizes the uniphier USB3 glue layer
reset to also cover AHCI.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCXDTOiBcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwMnMAP9u9pJr0g6t/8NwiDNQGYIupFMQ
vH3hIUP7pwkELeN36AEAuFJG66r1Y96icDQCLn9x6vxwgTDmJGgGHM3CWEftsQI=
=vFwq
-----END PGP SIGNATURE-----
Merge tag 'reset-for-5.0-rc2' of git://git.pengutronix.de/git/pza/linux into fixes
Late reset controller changes for v5.0
This adds missing deassert functionality to the ARC HSDK reset driver,
fixes some indentation and grammar issues in the kernel docs, adds a
helper to count the number of resets on a device for the non-DT case
as well, adds an early reset driver for SoCFPGA and simple reset driver
support for Stratix10, and generalizes the uniphier USB3 glue layer
reset to also cover AHCI.
* tag 'reset-for-5.0-rc2' of git://git.pengutronix.de/git/pza/linux:
reset: uniphier-glue: Add AHCI reset control support in glue layer
dt-bindings: reset: uniphier: Add AHCI core reset description
reset: uniphier-usb3: Rename to reset-uniphier-glue
dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals
ARM: socfpga: dts: document "altr,stratix10-rst-mgr" binding
reset: socfpga: add an early reset driver for SoCFPGA
reset: fix null pointer dereference on dev by dev_name
reset: Add reset_control_get_count()
reset: Improve reset controller kernel docs
ARC: HSDK: improve reset driver
Signed-off-by: Olof Johansson <olof@lixom.net>
They are all device tree fixes which also worth being in stable:
- Reserve PSCI area on Armada 7K/8K preventing the kernel accessing
this area and crashing while doing it.
- Use correct PCIe reset signal on MACCHIATOBin (Armada 8040 based)
- Fix polarity of GPIO fan line D-Link DNS NASes(kikwood based)
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXDjK7AAKCRALBhiOFHI7
1eZfAJ0X/MrjG/MB1NSlJ2kUGmBs5MnnswCdFZpNF4okkjtwyWoCoBsp9X3kUkw=
=vYNz
-----END PGP SIGNATURE-----
Merge tag 'mvebu-fixes-5.0-1' of git://git.infradead.org/linux-mvebu into fixes
mvebu fixes for 5.0
They are all device tree fixes which also worth being in stable:
- Reserve PSCI area on Armada 7K/8K preventing the kernel accessing
this area and crashing while doing it.
- Use correct PCIe reset signal on MACCHIATOBin (Armada 8040 based)
- Fix polarity of GPIO fan line D-Link DNS NASes(kikwood based)
* tag 'mvebu-fixes-5.0-1' of git://git.infradead.org/linux-mvebu:
ARM: dts: kirkwood: Fix polarity of GPIO fan lines
arm64: dts: marvell: mcbin: fix PCIe reset signal
arm64: dts: marvell: armada-ap806: reserve PSCI area
Signed-off-by: Olof Johansson <olof@lixom.net>
- Handle failed allocations in the IM/PC bus attachment.
- Use struct_size() for allocation.
-----BEGIN PGP SIGNATURE-----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=KT88
-----END PGP SIGNATURE-----
Merge tag 'integrator-fixes-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into fixes
Fixes for the Integrator:
- Handle failed allocations in the IM/PC bus attachment.
- Use struct_size() for allocation.
* tag 'integrator-fixes-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: integrator: impd1: use struct_size() in devm_kzalloc()
gpio: pl061: handle failed allocations
Signed-off-by: Olof Johansson <olof@lixom.net>
* Add required includes into qcom_scm.h
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=v8pH
-----END PGP SIGNATURE-----
Merge tag 'qcom-fixes-for-5.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into fixes
Qualcomm Driver Fixes for 5.0-rc1
* Add required includes into qcom_scm.h
* tag 'qcom-fixes-for-5.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
qcom-scm: Include <linux/err.h> header
Signed-off-by: Olof Johansson <olof@lixom.net>
DaVinci board support due to GPIO driver clean-up introduced
in v4.20 kernel. These are marked for stable.
Also has fixes for some long standing Audio issues on DA850
boards.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=iyBf
-----END PGP SIGNATURE-----
Merge tag 'davinci-fixes-for-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes
This pull request fixes some more regressions on legacy
DaVinci board support due to GPIO driver clean-up introduced
in v4.20 kernel. These are marked for stable.
Also has fixes for some long standing Audio issues on DA850
boards.
* tag 'davinci-fixes-for-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: dts: da850-lcdk: Correct the sound card name
ARM: dts: da850-lcdk: Correct the audio codec regulators
ARM: dts: da850-evm: Correct the sound card name
ARM: dts: da850-evm: Correct the audio codec regulators
ARM: davinci: omapl138-hawk: fix label names in GPIO lookup entries
ARM: davinci: dm644x-evm: fix label names in GPIO lookup entries
ARM: davinci: dm355-evm: fix label names in GPIO lookup entries
ARM: davinci: da850-evm: fix label names in GPIO lookup entries
ARM: davinci: da830-evm: fix label names in GPIO lookup entries
Signed-off-by: Olof Johansson <olof@lixom.net>
Renesas SoCs:
* Fix build regressions caused by move of Kconfig symbols
RZ/G2E (r8a774c0) SoC:
* Correct initialization order of 3DG-{A,B} in SYSC driver
-----BEGIN PGP SIGNATURE-----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=zkaU
-----END PGP SIGNATURE-----
Merge tag 'renesas-fixes-for-v5.0' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes
Renesas ARM Based SoC Fixes for v5.0
Renesas SoCs:
* Fix build regressions caused by move of Kconfig symbols
RZ/G2E (r8a774c0) SoC:
* Correct initialization order of 3DG-{A,B} in SYSC driver
* tag 'renesas-fixes-for-v5.0' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
soc: renesas: r8a774c0-sysc: Fix initialization order of 3DG-{A,B}
ARM: shmobile: fix build regressions
Signed-off-by: Olof Johansson <olof@lixom.net>
Commit 49e54187ae ("ata: libahci_platform: comply to PHY framework") uses
the PHY_MODE_SATA, but that enum had not yet been added. This caused a
build failure for me, with today's linux.git.
Also, there is a potentially conflicting (mis-named) PHY_MODE_SATA, hiding
in the Marvell Berlin SATA PHY driver.
Fix the build by:
1) Renaming Marvell's defined value to a more scoped name,
in order to avoid any potential conflicts: PHY_BERLIN_MODE_SATA.
2) Adding the missing enum, which was going to be added anyway as part
of [1].
[1] https://lkml.kernel.org/r/20190108163124.6409-3-miquel.raynal@bootlin.com
Fixes: 49e54187ae ("ata: libahci_platform: comply to PHY framework")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Olof Johansson <olof@lixom.net>
Cc: Grzegorz Jaszczyk <jaz@semihalf.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAlw6VoIQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgptaHD/wLDzVDkptMK7Essk73vjBaz6w2MYl/Bvb4
2YtktHlrCB8S/0Xze7t5tvsGxym2fv1ymsV48Sdnl+lW+2tf6e3LJEfAp7yLWoEs
K6UdFkhYK7fdKx84dHIcslvyY0id9qjRteRiFHrd/023N4FZDkbKOtfeRBZi7e4Q
yTP2FzQEnSV5a0ngh9J+xxHUXF7a4LfeVj9ddhwcBIAeJ1MUfLTaHxRR8Qc3nw3F
7nGvLHu2vrWK3EDBBA/PsBqMJhsoW2AV0G7Xbv6Ai7e14GWVYr+MGjIYC41yIlRm
46oBoveIRI5dkhR5/mO685vB774yAN6RExOP9Xlg/cA3XxbpdWP9uDtfRbuvo64O
WOm2btWKjxOldCao4wClaJARcjSyocPTKwlWQE7OfVcN+3WbsD26sd+GdCvrSG7a
+E3xcyPUURN1e7t4YyDGDL1wKBPuZP6jvcGUfoqLMr3O12aIjlAiJFPhm1Hqv+dA
KaJjsCwShSDJfeWLvP/Lt1KtVoBinrKA/5qkkB7zJA7I+qNP7bAR25BtuXKo1U7t
5vRGk7rfvdtsE5oH7y1we9AxoA7jD6t5Z60mPRdkVaXzi9SSw3th/YAuUhcU2g0V
0I2icAGQI8bbZzFgJe+d4f1L57EQ/7fWfcwENNLkLu57E/gZlYYqt//tSrF8W0ur
wcthJWqOZg==
=OFV3
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20190112' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph, with little fixes all over the map
- Loop caching fix for offset/bs change (Jaegeuk Kim)
- Block documentation tweaks (Jeff, Jon, Weiping, John)
- null_blk zoned tweak (John)
- ahch mvebu suspend/resume support. Should have gone into the merge
window, but there was some confusion on which tree had it. (Miquel)
* tag 'for-linus-20190112' of git://git.kernel.dk/linux-block: (22 commits)
ata: ahci: mvebu: request PHY suspend/resume for Armada 3700
ata: ahci: mvebu: add Armada 3700 initialization needed for S2RAM
ata: ahci: mvebu: do Armada 38x configuration only on relevant SoCs
ata: ahci: mvebu: remove stale comment
ata: libahci_platform: comply to PHY framework
loop: drop caches if offset or block_size are changed
block: fix kerneldoc comment for blk_attempt_plug_merge()
nvme: don't initlialize ctrl->cntlid twice
nvme: introduce NVME_QUIRK_IGNORE_DEV_SUBNQN
nvme: pad fake subsys NQN vid and ssvid with zeros
nvme-multipath: zero out ANA log buffer
nvme-fabrics: unset write/poll queues for discovery controllers
nvme-tcp: don't ask if controller is fabrics
nvme-tcp: remove dead code
nvme-pci: fix out of bounds access in nvme_cqe_pending
nvme-pci: rerun irq setup on IO queue init errors
nvme-pci: use the same attributes when freeing host_mem_desc_bufs.
nvme-pci: fix the wrong setting of nr_maps
block: doc: add slice_idle_us to bfq documentation
block: clarify documentation for blk_{start|finish}_plug
...
We've always had a weird situation around dma_zalloc_coherent. To
safely support mapping the allocations to userspace major architectures
like x86 and arm have always zeroed allocations from dma_alloc_coherent,
but a couple other architectures were missing that zeroing either always
or in corner cases. Then later we grew anothe dma_zalloc_coherent
interface to explicitly request zeroing, but that just added __GFP_ZERO
to the allocation flags, which for some allocators that didn't end
up using the page allocator ended up being a no-op and still not
zeroing the allocations.
So for this merge window I fixed up all remaining architectures to zero
the memory in dma_alloc_coherent, and made dma_zalloc_coherent a no-op
wrapper around dma_alloc_coherent, which fixes all of the above issues.
dma_zalloc_coherent is now pointless and can go away, and Luis helped
me writing a cocchinelle script and patch series to kill it, which I
think we should apply now just after -rc1 to finally settle these
issue.
-----BEGIN PGP SIGNATURE-----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=VIBB
-----END PGP SIGNATURE-----
Merge tag 'remove-dma_zalloc_coherent-5.0' of git://git.infradead.org/users/hch/dma-mapping
Pull dma_zalloc_coherent() removal from Christoph Hellwig:
"We've always had a weird situation around dma_zalloc_coherent. To
safely support mapping the allocations to userspace major
architectures like x86 and arm have always zeroed allocations from
dma_alloc_coherent, but a couple other architectures were missing that
zeroing either always or in corner cases.
Then later we grew anothe dma_zalloc_coherent interface to explicitly
request zeroing, but that just added __GFP_ZERO to the allocation
flags, which for some allocators that didn't end up using the page
allocator ended up being a no-op and still not zeroing the
allocations.
So for this merge window I fixed up all remaining architectures to
zero the memory in dma_alloc_coherent, and made dma_zalloc_coherent a
no-op wrapper around dma_alloc_coherent, which fixes all of the above
issues.
dma_zalloc_coherent is now pointless and can go away, and Luis helped
me writing a cocchinelle script and patch series to kill it, which I
think we should apply now just after -rc1 to finally settle these
issue"
* tag 'remove-dma_zalloc_coherent-5.0' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: remove dma_zalloc_coherent()
cross-tree: phase out dma_zalloc_coherent() on headers
cross-tree: phase out dma_zalloc_coherent()
Minor fixes for new code, corner cases, and documentation.
Patches are isolated and sufficiently described by the shortlog.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEj/xJEkTHTJzZE/FJQP/qGw8qh+gFAlw52x0ACgkQQP/qGw8q
h+iejgf+NjD3jXCYAxLtGInXyQEwqw113Gr8941oC2E50CifTqrFhWNkRgl+GyCS
x92SCiNS1xpy+SnUZDj63MjsB90zOOogPG+RYsSE+BAN/i/9IiE2F5aYSXlen0rR
SOOfraQTDlS5rOp9auGMNlNWkmEKCO6YEsdmlNte/QVNuy4vrHfAJDvdfCUiC0qO
XJWMjIyZElsKJUtmZzKuTrCZniBvqn6yGH+/0kggrzDPPIHU+M7qSkMkAC7wqrFy
0zaeKNloArFLKlDQPQ3AykgxCrp6CJnXuR/Oo6R5rn9jF2kVdlzglx7pHBAc5OGp
wI+VDWRA2x2JevWcIdsN2Xp2vaCRGw==
=L1zP
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"Minor fixes for new code, corner cases, and documentation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/kvm/nVMX: don't skip emulated instruction twice when vmptr address is not backed
Documentation/virtual/kvm: Update URL for AMD SEV API specification
KVM/VMX: Avoid return error when flush tlb successfully in the hv_remote_flush_tlb_with_range()
kvm: sev: Fail KVM_SEV_INIT if already initialized
KVM: validate userspace input in kvm_clear_dirty_log_protect()
KVM: x86: Fix bit shifting in update_intel_pt_cfg
nouveau:
one backlight, falcon register access, and a fan fix.
i915:
- Disable PSR for Apple panels
- Broxton ERR_PTR error state fix
- Kabylake VECS workaround fix
- Unwind failure on pinning the gen7 ppgtt
- GVT workload request allocation fix
core:
- Fix fb-helper to work correctly with SDL 1.2 bugs.
- Fix lockdep warning in the atomic ioctl and setproperty.
-----BEGIN PGP SIGNATURE-----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=7xM2
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2019-01-11-1' of git://anongit.freedesktop.org/drm/drm
Pull more drm fixes from Daniel Vetter:
"Dave sends out his pull, everybody remembers holidays are over :-)
Since Dave's already in weekend mode and it was quite a few patches I
figured better to apply all the pulls and forward them to you. Hence
here 2nd part of bugfixes for -rc2.
nouveau:
- backlight fix
- falcon register access fix
- fan fix.
i915:
- Disable PSR for Apple panels
- Broxton ERR_PTR error state fix
- Kabylake VECS workaround fix
- Unwind failure on pinning the gen7 ppgtt
- GVT workload request allocation fix
core:
- Fix fb-helper to work correctly with SDL 1.2 bugs
- Fix lockdep warning in the atomic ioctl and setproperty"
* tag 'drm-fixes-2019-01-11-1' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau/falcon: avoid touching registers if engine is off
drm/nouveau: Don't disable polling in fallback mode
drm/nouveau: register backlight on pascal and newer
drm: Fix documentation generation for DP_DPCD_QUIRK_NO_PSR
drm/i915: init per-engine WAs for all engines
drm/i915: Unwind failure on pinning the gen7 ppgtt
drm/i915: Skip the ERR_PTR error state
drm/i915: Disable PSR in Apple panels
gpu/drm: Fix lock held when returning to user space.
drm/fb-helper: Ignore the value of fb_var_screeninfo.pixclock
drm/fb-helper: Partially bring back workaround for bugs of SDL 1.2
drm/i915/gvt: Fix workload request allocation before request add
A feature has been added in the libahci driver: the possibility to set
a new flag in hpriv->flags to let the core handle PHY suspend/resume
automatically. Make use of this feature to make suspend to RAM work
with SATA drives on A3700.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A3700 comphy initialization is done in the firmware (TF-A). Looking at
the SATA PHY initialization routine, there is a comment about "vendor
specific" registers. Two registers are mentioned. They are not
initialized there in the firmware because they are AHCI related, while
the firmware at this location does only PHY configuration. The
solution to avoid doing such initialization is relying on U-Boot.
While this work at boot time, U-Boot is definitely not going to run
during a resume after suspending to RAM.
Two possible solutions were considered:
* Fixing the firmware.
* Fixing the kernel driver.
The first solution would take ages to propagate, while the second
solution is easy to implement as the driver as been a little bit
reworked to prepare for such platform configuration. Hence, this patch
adds an Armada 3700 configuration function to set these two registers
both at boot time (in the probe) and after a suspend (in the resume
path).
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
At the beginning, only Armada 38x SoCs where supported by the
ahci_mvebu.c driver. Commit 15d3ce7b63 ("ata: ahci_mvebu: add
support for Armada 3700 variant") introduced Armada 3700 support. As
opposed to Armada 38x SoCs, the 3700 variants do not have to configure
mbus and the regret option. This patch took care of avoiding such
configuration when not needed in the probe function, but failed to do
the same in the resume path. While doing so looks harmless by
experience, let's clean the driver logic and avoid doing this useless
configuration with Armada 3700 SoCs.
Because the logic is very similar between these two places, it has
been decided to factorize this code and put it in a "Armada 38x
configuration function". This function is part of a new
(per-compatible) platform data structure, so that the addition of such
configuration function for Armada 3700 will be eased.
Fixes: 15d3ce7b63 ("ata: ahci_mvebu: add support for Armada 3700 variant")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For Armada-38x (32-bit) SoCs, PM platform support has been added since:
commit 32f9494c9d ("ARM: mvebu: prepare pm-board.c for the
introduction of Armada 38x support")
commit 3cbd6a6ca8 ("ARM: mvebu: Add standby support")
For Armada 64-bit SoCs, like the A3700 also using this AHCI driver, PM
platform support has always existed.
There are even suspend/resume hooks in this driver since:
commit d6ecf15814 ("ata: ahci_mvebu: add suspend/resume support")
Remove the stale comment at the end of this driver stating that all
the above does not exist yet.
Fixes: d6ecf15814 ("ata: ahci_mvebu: add suspend/resume support")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Current implementation of the libahci does not take into account the
new PHY framework. Correct the situation by adding a call to
phy_set_mode() before phy_power_on().
PHYs should also be handled at suspend/resume time. For this, call
ahci_platform_enable/disable_phys() at suspend/resume_host() time. These
calls are guarded by a HFLAG (AHCI_HFLAG_SUSPEND_PHYS) that the user of
the libahci driver must set manually in hpriv->flags at probe time. This
is to avoid breaking users that have not been tested with this change.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Suggested-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull i2c fixes from Wolfram Sang:
"I2C has one core and one driver bugfix for you"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: tegra: Fix Maximum transfer size
i2c: dev: prevent adapter retries and timeout being set as minus value
- Don't error in kexec_file_load if kaslr-seed is missing in device-tree
- Fix incorrect argument type passed to iort_match_node_callback()
- Fix IORT build failure when CONFIG_IOMMU_API=n
- Fix kpti performance regression with new rodata default option
- Typo fix
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAlw4mMwACgkQt6xw3ITB
YzSPoAf8Ci2O+LAhPHKgbGRCPuM3TCl69zYKD0I3OHbLXOpGk0ykWvYxOPkCHipr
DpilFzWXyr0bUjg8GtsUAFlfPuzSCj/UpreRIN6o0+AEHZ5t1RTqxfRaSah5V7Df
mDMlvPw8qS05ieIPwz0AOrR/ZxODqWeu9GaiWRbSx2ZH9/e2YL1dnHfcZ+77CsWZ
Wdb99aVT5UcLbPmAtj/0hs+o6NekjwGt70JCBytXP6lJM/Hh7SeNNjJPNnKvisag
GYHg/Vn5uA37/80iLkXq5J/pu1mrDqEZO1/KfZcmQ1umnCm2CLJNKDoJc3kGLVhT
wZYv8TLY0i42fJ2m03yp8v8lKf/29w==
=9NUe
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Another handful of arm64 fixes here. Most of the complication comes
from improving our kpti code to avoid lengthy pauses (30+ seconds)
during boot when we rewrite the page tables. There are also a couple
of IORT fixes that came in via Lorenzo.
Summary:
- Don't error in kexec_file_load if kaslr-seed is missing in
device-tree
- Fix incorrect argument type passed to iort_match_node_callback()
- Fix IORT build failure when CONFIG_IOMMU_API=n
- Fix kpti performance regression with new rodata default option
- Typo fix"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kexec_file: return successfully even if kaslr-seed doesn't exist
ACPI/IORT: Fix rc_dma_get_range()
arm64: kpti: Avoid rewriting early page tables when KASLR is enabled
arm64: asm-prototypes: Fix fat-fingered typo in comment
ACPI/IORT: Fix build when CONFIG_IOMMU_API=n
edge case, marked for stable.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAlw4yfETHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi9loB/4iTBs/c5vI8oXSi+n4IAAG/LunP8Ff
HfxMr7Mpbpp0cLdzmJWO63Wejii95w7IkdepJTF5VlpH6dwJDUL6jSAyAXPO1a2G
phZHmnGYjFBKLGPftCZmGQCJeYeS9JJyRgTC4IZECVkQRiPRGXn8cAbEqMYOy6Am
mXmy0u4Me3RJTpcOCqaPPugontvtsZdfqvwVE2dGqXTj9Kh1hfum5ddrvf1CXugQ
MpXzW3mJCMMfcXlZOCVuQInKqPT4HRhTpzJxdECiJTxBXDQUd6e0ekOXmKW6jOYk
ZpNVnXHGee0uvzwQC0/VMWkRF6d+pOsYFQkDlX79h04rqnoBkUNc2Doe
=dJev
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.0-rc2' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"A patch to allow setting abort_on_full and a fix for an old "rbd
unmap" edge case, marked for stable"
* tag 'ceph-for-5.0-rc2' of git://github.com/ceph/ceph-client:
rbd: don't return 0 on unmap if RBD_DEV_FLAG_REMOVING is set
ceph: use vmf_error() in ceph_filemap_fault()
libceph: allow setting abort_on_full for rbd
Pull perf tooling updates from Ingo Molnar:
"Tooling changes only: fixes and a few stray improvements.
Most of the diffstat is dominated by a PowerPC related fix of system
call trace output beautification that allows us to (again) use the
UAPI header version and sync up with the kernel's version of PowerPC
system call names in the arch/powerpc/kernel/syscalls/syscall.tbl
header"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
tools headers powerpc: Remove unistd.h
perf powerpc: Rework syscall table generation
perf symbols: Add 'arch_cpu_idle' to the list of kernel idle symbols
tools include uapi: Sync linux/if_link.h copy with the kernel sources
tools include uapi: Sync linux/vhost.h with the kernel sources
tools include uapi: Sync linux/fs.h copy with the kernel sources
perf beauty: Switch from using uapi/linux/fs.h to uapi/linux/mount.h
tools include uapi: Grab a copy of linux/mount.h
perf top: Lift restriction on using callchains without "sym" in --sort
tools lib traceevent: Remove tep_data_event_from_type() API
tools lib traceevent: Rename tep_is_file_bigendian() to tep_file_bigendian()
tools lib traceevent: Changed return logic of tep_register_event_handler() API
tools lib traceevent: Changed return logic of trace_seq_printf() and trace_seq_vprintf() APIs
tools lib traceevent: Rename struct cmdline to struct tep_cmdline
tools lib traceevent: Initialize host_bigendian at tep_handle allocation
tools lib traceevent: Introduce new libtracevent API: tep_override_comm()
perf tests: Add a test for the ARM 32-bit [vectors] page
perf tools: Make find_vdso_map() more modular
perf trace: Fix alignment for [continued] lines
perf trace: Fix ')' placement in "interrupted" syscall lines
...
Since commit 09abb5e3e5 ("KVM: nVMX: call kvm_skip_emulated_instruction
in nested_vmx_{fail,succeed}") nested_vmx_failValid() results in
kvm_skip_emulated_instruction() so doing it again in handle_vmptrld() when
vmptr address is not backed is wrong, we end up advancing RIP twice.
Fixes: fca91f6d60 ("kvm: nVMX: Set VM instruction error for VMPTRLD of unbacked page")
Reported-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
The URL of [api-spec] in Documentation/virtual/kvm/amd-memory-encryption.rst
is no longer valid, replaced space with underscore.
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
The "ret" is initialized to be ENOTSUPP. The return value of
__hv_remote_flush_tlb_with_range() will be Or with "ret" when ept
table potiners are mismatched. This will cause return ENOTSUPP even if
flush tlb successfully. This patch is to fix the issue and set
"ret" to 0.
Fixes: a5c214dad1 ("KVM/VMX: Change hv flush logic when ept tables are mismatched.")
Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
By code inspection, it was found that multiple calls to KVM_SEV_INIT
could deplete asid bits and overwrite kvm_sev_info's regions_list.
Multiple calls to KVM_SVM_INIT is not likely to occur with QEMU, but this
should likely be fixed anyway.
This code is serialized by kvm->lock.
Fixes: 1654efcbc4 ("KVM: SVM: Add KVM_SEV_INIT command")
Reported-by: Cfir Cohen <cfir@google.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
The function at issue does not fully validate the content of the
structure pointed by the log parameter, though its content has just been
copied from userspace and lacks validation. Fix that.
Moreover, change the type of n to unsigned long as that is the type
returned by kvm_dirty_bitmap_bytes().
Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
Reported-by: syzbot+028366e52c9ace67deb3@syzkaller.appspotmail.com
[Squashed the fix from Paolo. - Radim.]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
ctl_bitmask in pt_desc is of type u64. When an integer like 0xf is
being left shifted more than 32 bits, the behavior is undefined.
Fix this by adding suffix ULL to integer 0xf.
Addresses-Coverity-ID: 1476095 ("Bad bit shift operation")
Fixes: 6c0f0bba85 ("KVM: x86: Introduce a function to initialize the PT configuration")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Pull x86 fixes from Ingo Molnar:
"A 32-bit build fix, CONFIG_RETPOLINE fixes and rename CONFIG_RESCTRL
to CONFIG_X86_RESCTRL"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, modpost: Replace last remnants of RETPOLINE with CONFIG_RETPOLINE
x86/cache: Rename config option to CONFIG_X86_RESCTRL
samples/seccomp: Fix 32-bit build
- Fix build failures with both CONFIG_NLS and CONFIG_PCI unset that
can occur since ACPI can be built without PCI now (Sinan Kaya).
- Clean up the handling of duplicate entries in power resource lists
returned by _PRx evaluation to avoid triggering WARN_ON() on
attempts to add duplicate symlinks in sysfs (Hans de Goede).
- Fix issues with the TS current-source switching on systems using
the xpower PMIC by avoiding to update unrelated bits in the TS
pin-ctrl register and avoiding to unconditionally enable TS
current-source on systems where it is not used (Hans de Goede).
- Fix addresses in NUMA-related messages on 32-bit with PAE which
can be truncated due to integer type conversions (Chao Fan).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=83Yo
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"Fix a build failure introduced recently, fix the xpower PMIC ACPI
driver, clean up the handling of duplicate entries in _PRx power
resource lists and fix addresses in NUMA-related messages on 32-bit
with PAE.
Specifics:
- Fix build failures with both CONFIG_NLS and CONFIG_PCI unset that
can occur since ACPI can be built without PCI now (Sinan Kaya).
- Clean up the handling of duplicate entries in power resource lists
returned by _PRx evaluation to avoid triggering WARN_ON() on
attempts to add duplicate symlinks in sysfs (Hans de Goede).
- Fix issues with the TS current-source switching on systems using
the xpower PMIC by avoiding to update unrelated bits in the TS
pin-ctrl register and avoiding to unconditionally enable TS
current-source on systems where it is not used (Hans de Goede).
- Fix addresses in NUMA-related messages on 32-bit with PAE which can
be truncated due to integer type conversions (Chao Fan)"
* tag 'acpi-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / PMIC: xpower: Fix TS-pin current-source handling
ACPI: NUMA: Use correct type for printing addresses on i386-PAE
ACPI: power: Skip duplicate power resource references in _PRx
ACPI: Fix build failure when CONFIG_NLS is set to 'n'
- Prevent integer overflows from occurring on 32-bit when
converting milliseconds to nanoseconds in the runtime PM
framework and update comments that still refer to jiffies
in it (Vincent Guittot, Ladislav Michl).
- Fix the SCMI cpufreq driver to always use the same frequency
units for arch_set_freq_scale() and make the scale-invariant
load tracking acutally work with this driver (Quentin Perret).
- Fix freeing of dynamic OPPs in the SCPI and SCMI cpufreq drivers
broken during the 4.20 defelopment cycle (Viresh Kumar).
- Prevent the cpufreq core from attempting to return the current
frequency of offline CPUs (Sudeep Holla).
- Add devfreq suspend and resume hooks (missed previously) to the
PM core to make the recently added system suspend and resume
support in devfreq actually work (Lukasz Luba).
- Update MAINTAINERS entries for cpufreq and cpuidle, mostly to add
references to new/current documentation to them (Rafael Wysocki).
- Fix a recently broken reference to cpuidle documentation (Otto
Sabart).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Z7S7
-----END PGP SIGNATURE-----
Merge tag 'pm-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These fix fallout after starting to use hrtimers in the runtime PM
framework, fix a few cpufreq issues, fix a recently broken reference
to cpuidle documentation, update MAINTAINERS entries for cpufreq and
cpuidle and make the recently added system suspend and resume support
in devfreq actually work.
Specifics:
- Prevent integer overflows from occurring on 32-bit when converting
milliseconds to nanoseconds in the runtime PM framework and update
comments that still refer to jiffies in it (Vincent Guittot,
Ladislav Michl).
- Fix the SCMI cpufreq driver to always use the same frequency units
for arch_set_freq_scale() and make the scale-invariant load
tracking acutally work with this driver (Quentin Perret).
- Fix freeing of dynamic OPPs in the SCPI and SCMI cpufreq drivers
broken during the 4.20 defelopment cycle (Viresh Kumar).
- Prevent the cpufreq core from attempting to return the current
frequency of offline CPUs (Sudeep Holla).
- Add devfreq suspend and resume hooks (missed previously) to the PM
core to make the recently added system suspend and resume support
in devfreq actually work (Lukasz Luba).
- Update MAINTAINERS entries for cpufreq and cpuidle, mostly to add
references to new/current documentation to them (Rafael Wysocki).
- Fix a recently broken reference to cpuidle documentation (Otto
Sabart)"
* tag 'pm-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM-runtime: Fix autosuspend_delay on 32bits arch
PM-runtime: Fix 'jiffies' in comments after switch to hrtimers
cpufreq: scmi: Fix frequency invariance in slow path
doc: trace: fix reference to cpuidle documentation file
cpufreq: check if policy is inactive early in __cpufreq_get()
cpufreq: scpi/scmi: Fix freeing of dynamic OPPs
cpuidle / Documentation: Update cpuidle MAINTAINERS entry
cpufreq / Documentation: Update cpufreq MAINTAINERS entry
PM: sleep: call devfreq suspend/resume
-----BEGIN PGP SIGNATURE-----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=Mq91
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2019-01-11' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Not a huge amount for rc2, assume the usual quiet period, and rc3 will
be most of it.
amdgpu:
- Powerplay fixes
- Virtual display pinning fixes
- Golden register updates for Vega
- Pitch and gem size validation fixes
- SR-IOV init error fix
- Pagetables in system RAM disable for some Raven system
- DP-MST resume fixes
tc358767 bridge:
- fix to work with displayport connector"
* tag 'drm-fixes-2019-01-11' of git://anongit.freedesktop.org/drm/drm: (26 commits)
drm/amdgpu: disable system memory page tables for now
drm/amdgpu: set WRITE_BURST_LENGTH to 64B to workaround SDMA1 hang
drm/amdgpu: fix CPDMA hang in PRT mode for VEGA20
drm/bridge: tc358767: use DP connector if no panel set
drm/bridge: tc358767: fix output H/V syncs
drm/bridge: tc358767: reject modes which require too much BW
drm/bridge: tc358767: fix initial DP0/1_SRCCTRL value
drm/bridge: tc358767: fix single lane configuration
drm/bridge: tc358767: add defines for DP1_SRCCTRL & PHY_2LANE
drm/bridge: tc358767: add bus flags
drm/dp_mst: Add __must_check to drm_dp_mst_topology_mgr_resume()
drm/amdgpu: Don't fail resume process if resuming atomic state fails
drm/amdgpu: Don't ignore rc from drm_dp_mst_topology_mgr_resume()
drm/amdgpu: validate user GEM object size
drm/amdgpu: validate user pitch alignment
drm/amd/powerplay: drop the unnecessary uclk hard min setting
drm/amd/powerplay: avoid possible buffer overflow
drm/amd/powerplay: create pp_od_clk_voltage device file under OD support
drm/amd/powerplay: update OD support flag for SKU with no OD capabilities
drm/amdgpu: make gfx9 enter into rlc safe mode when set MGCG
...
Try to get reference for ldisc during tty_reopen().
If ldisc present, we don't need to do tty_ldisc_reinit() and lock the
write side for line discipline semaphore.
Effectively, it optimizes fast-path for tty_reopen(), but more
importantly it won't interrupt ongoing IO on the tty as no ldisc change
is needed.
Fixes user-visible issue when tty_reopen() interrupted login process for
user with a long password, observed and reported by Lukas.
Fixes: c96cf923a9 ("tty: Don't block on IO when ldisc change is pending")
Fixes: 83d817f410 ("tty: Hold tty_ldisc_lock() during tty_reopen()")
Cc: Jiri Slaby <jslaby@suse.com>
Reported-by: Lukas F. Hartmann <lukas@mntmn.com>
Tested-by: Lukas F. Hartmann <lukas@mntmn.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch aims to address writeback code problems related to error
paths. In particular it respects EINTR and related error codes and
stores and returns the first error occurred during writeback.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently we account for credits in the thread initiating a request
and waiting for a response. The demultiplex thread receives the response,
wakes up the thread and the latter collects credits from the response
buffer and add them to the server structure on the client. This approach
is not accurate, because it may race with reconnect events in the
demultiplex thread which resets the number of credits.
Fix this by moving credit processing to new mid callbacks that collect
credits granted by the server from the response in the demultiplex thread.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If a request is cancelled, we can't assume that the server returns
1 credit back. Instead we need to wait for a response and process
the number of credits granted by the server.
Create a separate mid callback for cancelled request, parse the number
of credits in a response buffer and add them to the client's credits.
If the didn't get a response (no response buffer available) assume
0 credits granted. The latter most probably happens together with
session reconnect, so the client's credits are adjusted anyway.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If maxBuf is small but non-zero, it could result in a zero sized lock
element array which we would then try and access OOB.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
The code tries to allocate a contiguous buffer with a size supplied by
the server (maxBuf). This could fail if memory is fragmented since it
results in high order allocations for commonly used server
implementations. It is also wasteful since there are probably
few locks in the usual case. Limit the buffer to be no larger than a
page to avoid memory allocation failures due to fragmentation.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This addresses some compile warnings that you can
see depending on configuration settings.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently we hide EINTR code returned from sock_sendmsg()
and return 0 instead. This makes a caller think that we
successfully completed the network operation which is not
true. Fix this by properly returning EINTR to callers.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
My recent commit to fix the printf warnings in ocm.c got the format
specifier wrong, because I copied it from the documentation without
realising the square brackets are not meant as literals.
This results in the address being suffixed with a literal "[p]".
Actually tested this time:
# cat info /sys/kernel/debug/ppc4xx_ocm
PhysAddr : 0x0000000400040000
...
NC.PhysAddr : 0x0000000400040000
...
C.PhysAddr : 0x0000000000000000
Fixes: 52b88fa1e8 ("powerpc/4xx/ocm: Fix phys_addr_t printf warnings")
Reported-by: Christian Lamparter <chunkeey@gmail.com>
Tested-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
With a recent change around IOMMU group, a system with an opencapi
adapter is no longer booting and we get a kernel oops:
BUG: Kernel NULL pointer dereference at 0x00000028
Faulting instruction address: 0xc0000000000aa38c
...
NIP pnv_try_setup_npu_table_group+0x1c/0x1a0
LR pnv_pci_ioda_fixup+0x1f8/0x660
Call Trace:
pnv_try_setup_npu_table_group+0x60/0x
pnv_pci_ioda_fixup+0x20c/0x660
pcibios_resource_survey+0x2c8/0x31c
pcibios_init+0xb0/0xe4
do_one_initcall+0x64/0x264
kernel_init_freeable+0x36c/0x468
kernel_init+0x2c/0x148
ret_from_kernel_thread+0x5c/0x68
An opencapi device is using a device PE, so the current code breaks
because pe->pbus is not defined.
More generally, there's no need to define an IOMMU group for opencapi,
as the device sends real addresses directly (admittedly, the
virtualization story is yet to be written). So let's fix it by
skipping the IOMMU group setup for opencapi PHBs.
Fixes: 0bd971676e ("powerpc/powernv/npu: Add compound IOMMU groups")
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit e1c3743e1a ("powerpc/tm: Set MSR[TS] just prior to recheckpoint")
moved a code block around and this block uses a 'msr' variable outside of
the CONFIG_PPC_TRANSACTIONAL_MEM, however the 'msr' variable is declared
inside a CONFIG_PPC_TRANSACTIONAL_MEM block, causing a possible error when
CONFIG_PPC_TRANSACTION_MEM is not defined.
error: 'msr' undeclared (first use in this function)
This is not causing a compilation error in the mainline kernel, because
'msr' is being used as an argument of MSR_TM_ACTIVE(), which is defined as
the following when CONFIG_PPC_TRANSACTIONAL_MEM is *not* set:
#define MSR_TM_ACTIVE(x) 0
This patch just fixes this issue avoiding the 'msr' variable usage outside
the CONFIG_PPC_TRANSACTIONAL_MEM block, avoiding trusting in the
MSR_TM_ACTIVE() definition.
Cc: stable@vger.kernel.org
Reported-by: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de>
Fixes: e1c3743e1a ("powerpc/tm: Set MSR[TS] just prior to recheckpoint")
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 8c8c10b90d ("powerpc/8xx: fix handling of early NULL pointer
dereference") moved the loading of r6 earlier in the code. As some
functions are called inbetween, r6 needs to be loaded again with the
address of swapper_pg_dir in order to set PTE pointers for
the Abatron BDI.
Fixes: 8c8c10b90d ("powerpc/8xx: fix handling of early NULL pointer dereference")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There is a typo so we accidentally allocate enough memory for a pointer
when we wanted to allocate enough for a struct.
Fixes: 0bd971676e ("powerpc/powernv/npu: Add compound IOMMU groups")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Linus Torvalds
Olof Johansson
John Hubbard
Miquel Raynal
Vitaly Kuznetsov
Christophe de Dinechin
Lan Tianyu
David Rientjes
Tomas Bortoli
Gustavo A. R. Silva
Dmitry Safonov
Steve French
Pavel Shilovsky
Ross Lagerwall
Aurelien Aptel
Michael Ellerman
Frederic Barrat
Breno Leitao
Christophe Leroy
Dan Carpenter