Граф коммитов

9 Коммитов

Автор SHA1 Сообщение Дата
Kumar Gala 7391ff35b2 [POWERPC] Make sure virtual P2P bridge registers are setup on PCIe PHB
For the Freescale PCIe PHBs Not all firmwares setup the virtual P2P
bridge registers properly.  Make sure they get setup based on what
the struct pci_controller got from the device tree.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23 22:30:11 -05:00
Roy Zang f16dab981a [POWERPC] Add basic PCI/PCI Express support for 8544DS board
Add basic support for the PCIe PHB and enable the ULI bridge.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23 22:30:02 -05:00
Kumar Gala 2e56ff206b [POWERPC] Make endianess of cfg_addr for indirect pci ops runtime
Make it so we do a runtime check to know if we need to write cfg_addr
as big or little endian.  This is needed if we want to allow 86xx support
to co-exist in the same kernel as other 6xx PPCs.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23 22:29:09 -05:00
Kumar Gala aa3c112146 [POWERPC] 85xx: Added 8568 PCIe support
Added the PCIe device node to the 8568 dts and the needed quirk entries.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23 10:27:08 -05:00
Kumar Gala 6c0a11c118 [POWERPC] Fixup resources on pci_bus for PCIe PHB when no device is connected
On the 85xx/86xx PCIe controllers if there is no device connected to the
PHB we will still allocate a pci_bus for downstream bus of the virtual
P2P bridge. However the resources allocated to the downstream bus are not
correct and so we just mimic the resources from the upstream pci_bus.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23 10:27:08 -05:00
Roy Zang 3f6c5dae27 [POWERPC] Use Freescale pci/pcie common code for 85xx boards
Switch the 85xx platform over to using the FSL generic PCI code.  This
gets ups PCIe support in addition to base PCI support.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23 10:27:08 -05:00
Kumar Gala 957ecffc25 [POWERPC] FSL: Cleanup how we detect if we are a PCIe controller
Use the PCI capabilities to determine if we are PCIe PHB.  Also use
PPC_INDIRECT_TYPE_NO_PCIE_LINK since the Freescale PCIe controllers
will lock the system if they don't have link and you try to do a config
access to anything but the PHB.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23 10:27:07 -05:00
Zang Roy-r61911 9ac4dd301e [POWERPC] Rewrite Freescale PCI/PCIe support for 8{3,5,6}xx
Rewrite the Freescale PCI code to support PCI on 83xx/85xx/86xx and
PCIe on 85xx/86xx.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23 10:27:07 -05:00
Roy Zang 55c44991e2 [POWERPC] Create common fsl pci/e files based on 86xx platforms
Move
arch/powerpc/platforms/86xx/pci.c -> arch/powerpc/sysdev/fsl_pci.c
arch/powerpc/sysdev/fsl_pcie.h -> arch/powerpc/sysdev/fsl_pci.h
as the base to unify 83xx/85xx/86xx pci and pcie.

Add CONFIG_FSL_PCI to build fsl_pci.c for Freescale pci and pcie option.
The code still works for 86xx platforms.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-23 10:27:07 -05:00