Граф коммитов

918 Коммитов

Автор SHA1 Сообщение Дата
Matias Karhumaa cb28c306b9 Bluetooth: SMP: fix crash in unpairing
In case unpair_device() was called through mgmt interface at the same time
when pairing was in progress, Bluetooth kernel module crash was seen.

[  600.351225] general protection fault: 0000 [#1] SMP PTI
[  600.351235] CPU: 1 PID: 11096 Comm: btmgmt Tainted: G           OE     4.19.0-rc1+ #1
[  600.351238] Hardware name: Dell Inc. Latitude E5440/08RCYC, BIOS A18 05/14/2017
[  600.351272] RIP: 0010:smp_chan_destroy.isra.10+0xce/0x2c0 [bluetooth]
[  600.351276] Code: c0 0f 84 b4 01 00 00 80 78 28 04 0f 84 53 01 00 00 4d 85 ed 0f 85 ab 00 00 00 48 8b 08 48 8b 50 08 be 10 00 00 00 48 89 51 08 <48> 89 0a 48 b9 00 02 00 00 00 00 ad de 48 89 48 08 48 8b 83 00 01
[  600.351279] RSP: 0018:ffffa9be839b3b50 EFLAGS: 00010246
[  600.351282] RAX: ffff9c999ac565a0 RBX: ffff9c9996e98c00 RCX: ffff9c999aa28b60
[  600.351285] RDX: dead000000000200 RSI: 0000000000000010 RDI: ffff9c999e403500
[  600.351287] RBP: ffffa9be839b3b70 R08: 0000000000000000 R09: ffffffff92a25c00
[  600.351290] R10: ffffa9be839b3ae8 R11: 0000000000000001 R12: ffff9c995375b800
[  600.351292] R13: 0000000000000000 R14: ffff9c99619a5000 R15: ffff9c9962a01c00
[  600.351295] FS:  00007fb2be27c700(0000) GS:ffff9c999e880000(0000) knlGS:0000000000000000
[  600.351298] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  600.351300] CR2: 00007fb2bdadbad0 CR3: 000000041c328001 CR4: 00000000001606e0
[  600.351302] Call Trace:
[  600.351325]  smp_failure+0x4f/0x70 [bluetooth]
[  600.351345]  smp_cancel_pairing+0x74/0x80 [bluetooth]
[  600.351370]  unpair_device+0x1c1/0x330 [bluetooth]
[  600.351399]  hci_sock_sendmsg+0x960/0x9f0 [bluetooth]
[  600.351409]  ? apparmor_socket_sendmsg+0x1e/0x20
[  600.351417]  sock_sendmsg+0x3e/0x50
[  600.351422]  sock_write_iter+0x85/0xf0
[  600.351429]  do_iter_readv_writev+0x12b/0x1b0
[  600.351434]  do_iter_write+0x87/0x1a0
[  600.351439]  vfs_writev+0x98/0x110
[  600.351443]  ? ep_poll+0x16d/0x3d0
[  600.351447]  ? ep_modify+0x73/0x170
[  600.351451]  do_writev+0x61/0xf0
[  600.351455]  ? do_writev+0x61/0xf0
[  600.351460]  __x64_sys_writev+0x1c/0x20
[  600.351465]  do_syscall_64+0x5a/0x110
[  600.351471]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  600.351474] RIP: 0033:0x7fb2bdb62fe0
[  600.351477] Code: 73 01 c3 48 8b 0d b8 6e 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 69 c7 2c 00 00 75 10 b8 14 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 de 80 01 00 48 89 04 24
[  600.351479] RSP: 002b:00007ffe062cb8f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000014
[  600.351484] RAX: ffffffffffffffda RBX: 000000000255b3d0 RCX: 00007fb2bdb62fe0
[  600.351487] RDX: 0000000000000001 RSI: 00007ffe062cb920 RDI: 0000000000000004
[  600.351490] RBP: 00007ffe062cb920 R08: 000000000255bd80 R09: 0000000000000000
[  600.351494] R10: 0000000000000353 R11: 0000000000000246 R12: 0000000000000001
[  600.351497] R13: 00007ffe062cbbe0 R14: 0000000000000000 R15: 0000000000000000
[  600.351501] Modules linked in: algif_hash algif_skcipher af_alg cmac ipt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo iptable_nat nf_nat_ipv4 xt_addrtype iptable_filter ip_tables xt_conntrack x_tables nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c br_netfilter bridge stp llc overlay arc4 nls_iso8859_1 dm_crypt intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp dell_laptop kvm_intel crct10dif_pclmul dell_smm_hwmon crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd cryptd glue_helper intel_cstate intel_rapl_perf uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev media hid_multitouch input_leds joydev serio_raw dell_wmi snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic dell_smbios dcdbas sparse_keymap
[  600.351569]  snd_hda_intel btusb snd_hda_codec btrtl btbcm btintel snd_hda_core bluetooth(OE) snd_hwdep snd_pcm iwlmvm ecdh_generic wmi_bmof dell_wmi_descriptor snd_seq_midi mac80211 snd_seq_midi_event lpc_ich iwlwifi snd_rawmidi snd_seq snd_seq_device snd_timer cfg80211 snd soundcore mei_me mei dell_rbtn dell_smo8800 mac_hid parport_pc ppdev lp parport autofs4 hid_generic usbhid hid i915 nouveau kvmgt vfio_mdev mdev vfio_iommu_type1 vfio kvm irqbypass i2c_algo_bit ttm drm_kms_helper syscopyarea sysfillrect sysimgblt mxm_wmi psmouse ahci sdhci_pci cqhci libahci fb_sys_fops sdhci drm e1000e video wmi
[  600.351637] ---[ end trace e49e9f1df09c94fb ]---
[  600.351664] RIP: 0010:smp_chan_destroy.isra.10+0xce/0x2c0 [bluetooth]
[  600.351666] Code: c0 0f 84 b4 01 00 00 80 78 28 04 0f 84 53 01 00 00 4d 85 ed 0f 85 ab 00 00 00 48 8b 08 48 8b 50 08 be 10 00 00 00 48 89 51 08 <48> 89 0a 48 b9 00 02 00 00 00 00 ad de 48 89 48 08 48 8b 83 00 01
[  600.351669] RSP: 0018:ffffa9be839b3b50 EFLAGS: 00010246
[  600.351672] RAX: ffff9c999ac565a0 RBX: ffff9c9996e98c00 RCX: ffff9c999aa28b60
[  600.351674] RDX: dead000000000200 RSI: 0000000000000010 RDI: ffff9c999e403500
[  600.351676] RBP: ffffa9be839b3b70 R08: 0000000000000000 R09: ffffffff92a25c00
[  600.351679] R10: ffffa9be839b3ae8 R11: 0000000000000001 R12: ffff9c995375b800
[  600.351681] R13: 0000000000000000 R14: ffff9c99619a5000 R15: ffff9c9962a01c00
[  600.351684] FS:  00007fb2be27c700(0000) GS:ffff9c999e880000(0000) knlGS:0000000000000000
[  600.351686] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  600.351689] CR2: 00007fb2bdadbad0 CR3: 000000041c328001 CR4: 00000000001606e0

Crash happened because list_del_rcu() was called twice for smp->ltk. This
was possible if unpair_device was called right after ltk was generated
but before keys were distributed.

In this commit smp_cancel_pairing was refactored to cancel pairing if it
is in progress and otherwise just removes keys. Once keys are removed from
rcu list, pointers to smp context's keys are set to NULL to make sure
removed list items are not accessed later.

This commit also adjusts the functionality of mgmt unpair_device() little
bit. Previously pairing was canceled only if pairing was in state that
keys were already generated. With this commit unpair_device() cancels
pairing already in earlier states.

Bug was found by fuzzing kernel SMP implementation using Synopsys
Defensics.

Reported-by: Pekka Oikarainen <pekka.oikarainen@synopsys.com>
Signed-off-by: Matias Karhumaa <matias.karhumaa@gmail.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2018-09-26 12:39:32 +03:00
YueHaibing ad3e0b2f3c Bluetooth: remove redundant variables 'adv_set' and 'cp'
Variables 'adv_set' and 'cp'  are being assigned but are never used hence
they are redundant and can be removed.

Cleans up clang warnings:
net/bluetooth/hci_event.c:1135:29: warning: variable 'adv_set' set but not used [-Wunused-but-set-variable]
net/bluetooth/mgmt.c:3359:39: warning: variable 'cp' set but not used [-Wunused-but-set-variable]

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2018-08-06 17:06:58 +03:00
Jaganath Kanakkassery 85a721a8b0 Bluetooth: Implement secondary advertising on different PHYs
This patch adds support for advertising in primary and secondary
channel on different PHYs. User can add the phy preference in
the flag based on which phy type will be added in extended
advertising parameter would be set.

@ MGMT Command: Add Advertising (0x003e) plen 11
        Instance: 1
        Flags: 0x00000200
          Advertise in CODED on Secondary channel
        Duration: 0
        Timeout: 0
        Advertising data length: 0
        Scan response length: 0
< HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 2
        Extended advertising: Disabled (0x00)
        Number of sets: Disable all sets (0x00)
> HCI Event: Command Complete (0x0e) plen 4
      LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2
        Status: Success (0x00)
< HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25
        Handle: 0x00
        Properties: 0x0000
        Min advertising interval: 1280.000 msec (0x0800)
        Max advertising interval: 1280.000 msec (0x0800)
        Channel map: 37, 38, 39 (0x07)
        Own address type: Random (0x01)
        Peer address type: Public (0x00)
        Peer address: 00:00:00:00:00:00 (OUI 00-00-00)
        Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00)
        TX power: 127 dbm (0x7f)
        Primary PHY: LE Coded (0x03)
        Secondary max skip: 0x00
        Secondary PHY: LE Coded (0x03)
        SID: 0x00
        Scan request notifications: Disabled (0x00)

Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30 13:44:53 +02:00
Jaganath Kanakkassery a73c046a28 Bluetooth: Implement Set ADV set random address
This basically sets the random address for the adv instance
Random address can be set only if the instance is created which
is done in Set ext adv param.

Random address and rpa expire timer and flags have been added
to adv instance which will be used when the respective
instance is scheduled.

This introduces a hci_get_random_address() which returns the
own address type and random address (rpa or nrpa) based
on the instance flags and hdev flags. New function is required
since own address type should be known before setting adv params
but address can be set only after setting params.

< HCI Command: LE Set Advertising Set Random Address (0x08|0x0035) plen 7
        Advertising handle: 0x00
        Advertising random address: 3C:8E:56:9B:77:84 (OUI 3C-8E-56)
> HCI Event: Command Complete (0x0e) plen 4
      LE Set Advertising Set Random Address (0x08|0x0035) ncmd 1
        Status: Success (0x00)

Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30 13:44:53 +02:00
Jaganath Kanakkassery 45b7749f16 Bluetooth: Implement disable and removal of adv instance
If ext adv is enabled then use ext adv to disable as well.
Also remove the adv set during LE disable.

< HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 2
        Extended advertising: Disabled (0x00)
        Number of sets: Disable all sets (0x00)
> HCI Event: Command Complete (0x0e) plen 4
      LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2
        Status: Success (0x00)

Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30 13:44:53 +02:00
Jaganath Kanakkassery a0fb3726ba Bluetooth: Use Set ext adv/scan rsp data if controller supports
This patch implements Set Ext Adv data and Set Ext Scan rsp data
if controller support extended advertising.

Currently the operation is set as Complete data and fragment
preference is set as no fragment

< HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 35
        Handle: 0x00
        Operation: Complete extended advertising data (0x03)
        Fragment preference: Minimize fragmentation (0x01)
        Data length: 0x15
        16-bit Service UUIDs (complete): 2 entries
          Heart Rate (0x180d)
          Battery Service (0x180f)
        Name (complete): Test LE
        Company: Google (224)
          Data: 0102
> HCI Event: Command Complete (0x0e) plen 4
      LE Set Extended Advertising Data (0x08|0x0037) ncmd 1
        Status: Success (0x00)

Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30 13:44:52 +02:00
Jaganath Kanakkassery de181e887a Bluetooth: Impmlement extended adv enable
This patch basically replaces legacy adv with extended adv
based on the controller support. Currently there is no
design change. ie only one adv set will be enabled at a time.

This also adds tx_power in instance and store whatever returns
from Set_ext_parameter, use the same in adv data as well.
For instance 0 tx_power is stored in hdev only.

< HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25
        Handle: 0x00
        Properties: 0x0010
          Use legacy advertising PDUs: ADV_NONCONN_IND
        Min advertising interval: 1280.000 msec (0x0800)
        Max advertising interval: 1280.000 msec (0x0800)
        Channel map: 37, 38, 39 (0x07)
        Own address type: Random (0x01)
        Peer address type: Public (0x00)
        Peer address: 00:00:00:00:00:00 (OUI 00-00-00)
        Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00)
        TX power: 127 dbm (0x7f)
        Primary PHY: LE 1M (0x01)
        Secondary max skip: 0x00
        Secondary PHY: LE 1M (0x01)
        SID: 0x00
        Scan request notifications: Disabled (0x00)
> HCI Event: Command Complete (0x0e) plen 5
      LE Set Extended Advertising Parameters (0x08|0x0036) ncmd 1
        Status: Success (0x00)
        TX power (selected): 7 dbm (0x07)
< HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6
        Extended advertising: Enabled (0x01)
        Number of sets: 1 (0x01)
        Entry 0
          Handle: 0x00
          Duration: 0 ms (0x00)
          Max ext adv events: 0
> HCI Event: Command Complete (0x0e) plen 4
      LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2
        Status: Success (0x00)

Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30 13:44:52 +02:00
Jaganath Kanakkassery b7c23df85b Bluetooth: Implement PHY changed event
This defines and implement phy changed event and send it to user
whenever selected PHYs changes using SET_PHY_CONFIGURATION.

This will be also trigerred when BREDR pkt_type is changed using
the legacy ioctl HCISETPTYPE.

@ MGMT Command: Set PHY Configuration (0x0045) plen 4
		Selected PHYs: 0x7fff
		  BR 1M 1SLOT
		  BR 1M 3SLOT
		  BR 1M 5SLOT
		  EDR 2M 1SLOT
		  EDR 2M 3SLOT
		  EDR 2M 5SLOT
		  EDR 3M 1SLOT
		  EDR 3M 3SLOT
		  EDR 3M 5SLOT
		  LE 1M TX
		  LE 1M RX
		  LE 2M TX
		  LE 2M RX
		  LE CODED TX
		  LE CODED RX
< HCI Command: LE Set Default PHY (0x08|0x0031) plen 3
		All PHYs preference: 0x00
		TX PHYs preference: 0x07
		  LE 1M
		  LE 2M
		  LE Coded
		RX PHYs preference: 0x07
		  LE 1M
		  LE 2M
		  LE Coded
> HCI Event: Command Complete (0x0e) plen 4
	  LE Set Default PHY (0x08|0x0031) ncmd 1
		Status: Success (0x00)
@ MGMT Event: Command Complete (0x0001) plen 3
	  Set PHY Configuration (0x0045) plen 0
		Status: Success (0x00)
@ MGMT Event: PHY Configuration Changed (0x0026) plen 4
		Selected PHYs: 0x7fff
		  BR 1M 1SLOT
		  BR 1M 3SLOT
		  BR 1M 5SLOT
		  EDR 2M 1SLOT
		  EDR 2M 3SLOT
		  EDR 2M 5SLOT
		  EDR 3M 1SLOT
		  EDR 3M 3SLOT
		  EDR 3M 5SLOT
		  LE 1M TX
		  LE 1M RX
		  LE 2M TX
		  LE 2M RX
		  LE CODED TX
		  LE CODED RX

Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30 13:44:52 +02:00
Jaganath Kanakkassery 0314f2867f Bluetooth: Implement Set PHY Confguration command
This enables user to set phys which will be used in all subsequent
connections. Also host will use the same in LE scanning as well.

@ MGMT Command: Set PHY Configuration (0x0045) plen 4
        Selected PHYs: 0x7fff
          BR 1M 1SLOT
          BR 1M 3SLOT
          BR 1M 5SLOT
          EDR 2M 1SLOT
          EDR 2M 3SLOT
          EDR 2M 5SLOT
          EDR 3M 1SLOT
          EDR 3M 3SLOT
          EDR 3M 5SLOT
          LE 1M TX
          LE 1M RX
          LE 2M TX
          LE 2M RX
          LE CODED TX
          LE CODED RX
< HCI Command: LE Set Default PHY (0x08|0x0031) plen 3
        All PHYs preference: 0x00
        TX PHYs preference: 0x07
          LE 1M
          LE 2M
          LE Coded
        RX PHYs preference: 0x07
          LE 1M
          LE 2M
          LE Coded
> HCI Event: Command Complete (0x0e) plen 4
      LE Set Default PHY (0x08|0x0031) ncmd 1
        Status: Success (0x00)
@ MGMT Event: Command Complete (0x0001) plen 3
      Set PHY Configuration (0x0045) plen 0
        Status: Success (0x00)
@ MGMT Event: PHY Configuration Changed (0x0026) plen 4
        Selected PHYs: 0x7fff
          BR 1M 1SLOT
          BR 1M 3SLOT
          BR 1M 5SLOT
          EDR 2M 1SLOT
          EDR 2M 3SLOT
          EDR 2M 5SLOT
          EDR 3M 1SLOT
          EDR 3M 3SLOT
          EDR 3M 5SLOT
          LE 1M TX
          LE 1M RX
          LE 2M TX
          LE 2M RX
          LE CODED TX
          LE CODED RX

Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30 13:44:52 +02:00
Jaganath Kanakkassery 6244691fec Bluetooth: Implement Get PHY Configuration mgmt command
This commands basically retrieve the supported packet types of
BREDR and supported PHYs of the controller.

BR_1M_1SLOT, LE_1M_TX and LE_1M_RX would be supported by default.
Other PHYs are supported based on the local features.

Also this sets PHY_CONFIGURATION bit in supported settings.

@ MGMT Command: Get PHY Configuration (0x0044) plen 0
@ MGMT Event: Command Complete (0x0001) plen 15
      Get PHY Configuration (0x0044) plen 12
        Status: Success (0x00)
        Supported PHYs: 0x7fff
          BR 1M 1SLOT
          BR 1M 3SLOT
          BR 1M 5SLOT
          EDR 2M 1SLOT
          EDR 2M 3SLOT
          EDR 2M 5SLOT
          EDR 3M 1SLOT
          EDR 3M 3SLOT
          EDR 3M 5SLOT
          LE 1M TX
          LE 1M RX
          LE 2M TX
          LE 2M RX
          LE CODED TX
          LE CODED RX
        Configurable PHYs: 0x79fe
          BR 1M 3SLOT
          BR 1M 5SLOT
          EDR 2M 1SLOT
          EDR 2M 3SLOT
          EDR 2M 5SLOT
          EDR 3M 1SLOT
          EDR 3M 3SLOT
          EDR 3M 5SLOT
          LE 2M TX
          LE 2M RX
          LE CODED TX
          LE CODED RX
        Selected PHYs: 0x07ff
          BR 1M 1SLOT
          BR 1M 3SLOT
          BR 1M 5SLOT
          EDR 2M 1SLOT
          EDR 2M 3SLOT
          EDR 2M 5SLOT
          EDR 3M 1SLOT
          EDR 3M 3SLOT
          EDR 3M 5SLOT
          LE 1M TX
          LE 1M RX

Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-07-30 13:44:52 +02:00
Gustavo A. R. Silva 9ea471320e Bluetooth: Mark expected switch fall-throughs
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-04-01 21:43:03 +03:00
Marcel Holtmann 2064ee332e Bluetooth: Use bt_dev_err and bt_dev_info when possible
In case of using BT_ERR and BT_INFO, convert to bt_dev_err and
bt_dev_info when possible. This allows for controller specific
reporting.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2017-10-30 12:25:45 +02:00
Jaganath Kanakkassery f17d858ed0 Bluetooth: Fix potential memory leak
If command is added to req then it should be freed in case if
hdev is down or HCI_ADVERTISING flag is set.

This introduces a helper in hci_request to purge the cmd_q
to make cmd_q internal to hci_request which is used to fix
the leak.

This also replace accessing of cmd_q in hci_conn with the
new helper.

Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-10-29 14:07:10 +01:00
Michał Narajowski f61851f64b Bluetooth: Fix append max 11 bytes of name to scan rsp data
Append maximum of 10 + 1 bytes of name to scan response data.
Complete name is appended only if exists and is <= 10 characters.
Else append short name if exists or shorten complete name if not.
This makes sure name is consistent across multiple advertising
instances.

Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-10-19 18:42:37 +02:00
Michał Narajowski 1b42206665 Bluetooth: Refactor append name and appearance
Use eir_append_data to remove code duplication.

Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-10-06 11:52:29 +02:00
Michał Narajowski 7dc6f16c68 Bluetooth: Fix not updating scan rsp when adv off
Scan response data should not be updated unless there
is an advertising instance.

Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-22 17:48:23 +02:00
Arek Lichwa dd7e39bbfc Bluetooth: Fix NULL pointer dereference in mgmt context
Adds missing callback assignment to cmd_complete in pending management command
context. Dump path involves security procedure performed on legacy (pre-SSP)
devices with service security requirements set to HIGH (16digits PIN).
It fails when shorter PIN is delivered by user.

[    1.517950] Bluetooth: PIN code is not 16 bytes long
[    1.518491] BUG: unable to handle kernel NULL pointer dereference at           (null)
[    1.518584] IP: [<          (null)>]           (null)
[    1.518584] PGD 9e08067 PUD 9fdf067 PMD 0
[    1.518584] Oops: 0010 [#1] SMP
[    1.518584] Modules linked in:
[    1.518584] CPU: 0 PID: 1002 Comm: kworker/u3:2 Not tainted 4.8.0-rc6-354649-gaf4168c #16
[    1.518584] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.9.3-20160701_074356-anatol 04/01/2014
[    1.518584] Workqueue: hci0 hci_rx_work
[    1.518584] task: ffff880009ce14c0 task.stack: ffff880009e10000
[    1.518584] RIP: 0010:[<0000000000000000>]  [<          (null)>]           (null)
[    1.518584] RSP: 0018:ffff880009e13bc8  EFLAGS: 00010293
[    1.518584] RAX: 0000000000000000 RBX: ffff880009eed100 RCX: 0000000000000006
[    1.518584] RDX: ffff880009ddc000 RSI: 0000000000000000 RDI: ffff880009eed100
[    1.518584] RBP: ffff880009e13be0 R08: 0000000000000000 R09: 0000000000000001
[    1.518584] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[    1.518584] R13: ffff880009e13ccd R14: ffff880009ddc000 R15: ffff880009ddc010
[    1.518584] FS:  0000000000000000(0000) GS:ffff88000bc00000(0000) knlGS:0000000000000000
[    1.518584] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    1.518584] CR2: 0000000000000000 CR3: 0000000009fdd000 CR4: 00000000000006f0
[    1.518584] Stack:
[    1.518584]  ffffffff81909808 ffff880009e13cce ffff880009e0d40b ffff880009e13c68
[    1.518584]  ffffffff818f428d 00000000024000c0 ffff880009e13c08 ffffffff810ca903
[    1.518584]  ffff880009e13c48 ffffffff811ade34 ffffffff8178c31f ffff880009ee6200
[    1.518584] Call Trace:
[    1.518584]  [<ffffffff81909808>] ? mgmt_pin_code_neg_reply_complete+0x38/0x60
[    1.518584]  [<ffffffff818f428d>] hci_cmd_complete_evt+0x69d/0x3200
[    1.518584]  [<ffffffff810ca903>] ? rcu_read_lock_sched_held+0x53/0x60
[    1.518584]  [<ffffffff811ade34>] ? kmem_cache_alloc+0x1a4/0x200
[    1.518584]  [<ffffffff8178c31f>] ? skb_clone+0x4f/0xa0
[    1.518584]  [<ffffffff818f9d81>] hci_event_packet+0x8e1/0x28e0
[    1.518584]  [<ffffffff81a421f1>] ? _raw_spin_unlock_irqrestore+0x31/0x50
[    1.518584]  [<ffffffff810aea3e>] ? trace_hardirqs_on_caller+0xee/0x1b0
[    1.518584]  [<ffffffff818e6bd1>] hci_rx_work+0x1e1/0x5b0
[    1.518584]  [<ffffffff8107e4bd>] ? process_one_work+0x1ed/0x6b0
[    1.518584]  [<ffffffff8107e538>] process_one_work+0x268/0x6b0
[    1.518584]  [<ffffffff8107e4bd>] ? process_one_work+0x1ed/0x6b0
[    1.518584]  [<ffffffff8107e9c3>] worker_thread+0x43/0x4e0
[    1.518584]  [<ffffffff8107e980>] ? process_one_work+0x6b0/0x6b0
[    1.518584]  [<ffffffff8107e980>] ? process_one_work+0x6b0/0x6b0
[    1.518584]  [<ffffffff8108505f>] kthread+0xdf/0x100
[    1.518584]  [<ffffffff81a4297f>] ret_from_fork+0x1f/0x40
[    1.518584]  [<ffffffff81084f80>] ? kthread_create_on_node+0x210/0x210

Signed-off-by: Arek Lichwa <arek.lichwa@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-22 17:37:21 +02:00
Michał Narajowski af4168c5a9 Bluetooth: Set appearance only for LE capable controllers
Setting appearance on controllers without LE support will result
in No Supported error.

Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19 21:48:22 +03:00
Michał Narajowski e74317f43f Bluetooth: Fix missing ext info event when setting appearance
This patch adds missing event when setting appearance, just like
in the set local name command.

Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19 20:33:27 +02:00
Michał Narajowski 5e9fae48f8 Bluetooth: Add supported data types to ext info changed event
This patch adds EIR data to extended info changed event.

Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19 20:33:27 +02:00
Szymon Janc 6a9e90bff9 Bluetooth: Add appearance to Read Ext Controller Info command
If LE is enabled appearance is added to EIR data.

Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19 20:33:27 +02:00
Michał Narajowski cde7a863d3 Bluetooth: Factor appending EIR to separate helper
This will also be used for Extended Information Event handling.

Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19 20:33:27 +02:00
Szymon Janc 7d5c11da1f Bluetooth: Refactor read_ext_controller_info handler
There is no need to allocate heap for reply only to copy stack data to
it. This also fix rp memory leak and missing hdev unlock if kmalloc
failed.

Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19 20:33:27 +02:00
Szymon Janc 3310230c5d Bluetooth: Increment management interface revision
Increment the mgmt revision due to the recently added
Read Extended Controller Information and Set Appearance commands.

Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19 20:19:34 +02:00
Szymon Janc 9c9db78dc0 Bluetooth: Fix advertising instance validity check for flags
Flags are not allowed in Scan Response.

Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19 20:19:34 +02:00
Szymon Janc 2bb36870e8 Bluetooth: Unify advertising instance flags check
This unifies max length and TLV validity checks.

Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19 20:19:34 +02:00
Szymon Janc 5e2c59e84b Bluetooth: Remove unused parameter from tlv_data_is_valid function
hdev parameter is not used in function.

Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19 20:19:34 +02:00
Michał Narajowski c4960ecf2b Bluetooth: Add support for appearance in scan rsp
This patch enables prepending appearance value to scan response data.
It also adds support for setting appearance value through mgmt command.
If currently advertised instance has apperance flag set it is expired
immediately.

Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19 20:19:34 +02:00
Michał Narajowski 7c295c4801 Bluetooth: Add support for local name in scan rsp
This patch enables appending local name to scan response data. If
currently advertised instance has name flag set it is expired
immediately.

Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19 20:19:34 +02:00
Wei Yongjun 3e36ca483a Bluetooth: Use kzalloc instead of kmalloc/memset
Use kzalloc rather than kmalloc followed by memset with 0.

Generated by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19 20:19:34 +02:00
Michał Narajowski 8a0c9f4909 Bluetooth: Append local name and CoD to Extended Controller Info
This adds device class, complete local name and short local name
to EIR data in Extended Controller Info as specified in docs.

Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19 20:19:34 +02:00
Marcel Holtmann 321c6feed2 Bluetooth: Add framework for Extended Controller Information
This command is used to retrieve the current state and basic
information of a controller. It is typically used right after
getting the response to the Read Controller Index List command
or an Index Added event (or its extended counterparts).

When any of the values in the EIR_Data field changes, the event
Extended Controller Information Changed will be used to inform
clients about the updated information.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
2016-09-19 20:19:34 +02:00
Marcel Holtmann 9db5c62951 Bluetooth: Use command status event for Set IO Capability errors
In case of failure, the Set IO Capability command is suppose to return
command status and not command complete.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19 20:19:34 +02:00
Marcel Holtmann 56f787c502 Bluetooth: Fix wrong Get Clock Information return parameters
The address information of the Get Clock Information return parameters
is copying from a different memory location. It uses &cmd->param while
it actually needs to be cmd->param.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19 20:19:34 +02:00
Marcel Holtmann 5504c3a310 Bluetooth: Use individual flags for certain management events
Instead of hiding everything behind a general managment events flag,
introduce indivdual flags that allow fine control over which events are
send to a given management channel.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19 20:19:34 +02:00
Johan Hedberg 37d3a1fab5 Bluetooth: mgmt: Fix sending redundant event for Advertising Instance
When an Advertising Instance is removed, the Advertising Removed event
shouldn't be sent to the same socket that issued the Remove
Advertising command (it gets a command complete event instead). The
mgmt_advertising_removed() function already has a parameter for
skipping a specific socket, but there was no code to propagate the
right value to this parameter. This patch fixes the issue by making
sure the intermediate hci_req_clear_adv_instance() function gets the
socket pointer.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19 20:19:34 +02:00
Marcel Holtmann 03c979c471 Bluetooth: Introduce helper to pack mgmt version information
The mgmt version information will be also needed for the control
changell tracing feature. This provides a helper to pack them.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19 20:19:34 +02:00
Johan Hedberg 87510973d6 Bluetooth: Increment management interface revision
Increment the mgmt revision due to the recently added new
reason code for the Disconnected event.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-07-13 10:02:52 +02:00
Marcel Holtmann ca8bee5dde Bluetooth: Rename HCI_BREDR into HCI_PRIMARY
The HCI_BREDR naming is confusing since it actually stands for Primary
Bluetooth Controller. Which is a term that has been used in the latest
standard. However from a legacy point of view there only really have
been Basic Rate (BR) and Enhanced Data Rate (EDR). Recent versions of
Bluetooth introduced Low Energy (LE) and made this terminology a little
bit confused since Dual Mode Controllers include BR/EDR and LE. To
simplify this the name HCI_PRIMARY stands for the Primary Controller
which can be a single mode or dual mode controller.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-07-09 21:37:13 +03:00
Johan Hedberg 6a0e78072c Bluetooth: Fix potential buffer overflow with Add Advertising
The Add Advertising command handler does the appropriate checks for
the AD and Scan Response data, however fails to take into account the
general length of the mgmt command itself, which could lead to
potential buffer overflows. This patch adds the necessary check that
the mgmt command length is consistent with the given ad and scan_rsp
lengths.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
2016-03-11 16:28:43 +01:00
Johan Hedberg 9c176cec42 Bluetooth: Increment management interface revision
Increment the mgmt revision due to the recently added limited
privacy mode.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-03-10 19:51:30 +01:00
Johan Hedberg 82a37adeed Bluetooth: Add support for limited privacy mode
Introduce a limited privacy mode indicated by value 0x02 to the mgmt
Set Privacy command.

With value 0x02 the kernel will use privacy mode with a resolvable
private address. In case the controller is bondable and discoverable
the identity address will be used.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-03-10 19:51:30 +01:00
Johan Hedberg 78b781ca0d Bluetooth: Add support for Start Limited Discovery command
This patch implements the mgmt Start Limited Discovery command. Most
of existing Start Discovery code is reused since the only difference
is the presence of a 'limited' flag as part of the discovery state.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-05 17:02:50 +01:00
Johan Hedberg 0d3b7f64c8 Bluetooth: Change eir_has_data_type() to more generic eir_get_data()
To make the EIR parsing helper more general purpose, make it return
the found data and its length rather than just saying whether the data
was present or not.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-01-05 17:02:49 +01:00
Johan Hedberg cab054ab47 Bluetooth: Clean up current advertising instance tracking
We can simplify a lot of code by making sure hdev->cur_adv_instance is
always up-to-date. This allows e.g. the removal of the
get_current_adv_instance() helper function and the special
HCI_ADV_CURRENT value. This patch also makes selecting instance 0x00
explicit in the various calls where advertising instances aren't
enabled, e.g. when HCI_ADVERTISING is set or we've just finished
enabling LE.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10 00:51:50 +01:00
Johan Hedberg 17fd08ffb5 Bluetooth: Remove unnecessary HCI_ADVERTISING_INSTANCE flag
This flag just tells us whether hdev->adv_instances is empty or not.
We can equally well use the list_empty() function to get this
information.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10 00:51:49 +01:00
Johan Hedberg 02c04afea9 Bluetooth: Simplify read_adv_features code
The code in the Read Advertising Features mgmt command handler is
unnecessarily complicated. Clean it up and remove unnecessary
variables & branches.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10 00:51:49 +01:00
Johan Hedberg 2ff13894cf Bluetooth: Perform HCI update for power on synchronously
The request to update HCI during power on is always coming either from
hdev->req_workqueue or through an ioctl, so it's safe to use
hci_req_sync for it. This way we also eliminate potential races with
incoming mgmt commands or other actions while powering on.

Part of this refactoring is the splitting of mgmt_powered() into
mgmt_power_on() and __mgmt_power_off() functions. The main reason is
the different requirements as far as hdev locking is concerned, as
highlighted with the __ prefix of the power off API.

Since the power on in the case of clearing the AUTO_OFF flag cannot be
done synchronously in the set_powered mgmt handler, the hci_power_on
work callback is extended to cover this (which also simplifies the
set_powered helper a lot).

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10 00:51:49 +01:00
Johan Hedberg bf943cbf76 Bluetooth: Move fast connectable code to hci_request.c
We'll soon need this both in hci_request.c and mgmt.c so move it to
hci_request.c as a generic helper.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10 00:51:48 +01:00
Johan Hedberg b1a8917c9b Bluetooth: Move EIR update to hci_request.c
We'll soon need to update the EIR both from hci_request.c and mgmt.c
so move update_eir() as a more generic request helper to
hci_request.c.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-12-10 00:51:48 +01:00