SCL rate appears to be different than what is expected. For example,
We get 164kHz on i2c3 of the vim3 when 400kHz is expected. This is
partially due to the peripheral clock being disabled when the clock is
set.
Let's keep the peripheral clock on after probe to fix the problem. This
does not affect the SCL output which is still gated when i2c is idle.
Fixes: 09af1c2fa4 ("i2c: meson: set clock divider in probe instead of setting it for each transfer")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
When the slave address is written in do_start(), SLAVE_ADDR is written
completely. This may overwrite some setting related to the clock rate
or signal filtering.
Fix this by writing only the bits related to slave address. To avoid
causing unexpected changed, explicitly disable filtering or high/low
clock mode which may have been left over by the bootloader.
Fixes: 30021e3707 ("i2c: add support for Amlogic Meson I2C controller")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
According to the "VFxxx Controller Reference Manual" (and the comment
block starting at line 97), Vybrid requires writing a one for clearing
an interrupt flag. Syncing the method for clearing I2SR_IIF in
i2c_imx_isr().
Signed-off-by: Christian Eggers <ceggers@arri.de>
Fixes: 4b775022f6 ("i2c: imx: add struct to hold more configurable quirks")
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Wolfram Sang <wsa@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCX3goZAAKCRCAXGG7T9hj
viTvAP9RdCXpqUtMMkOn+EjEuPSassK+o5ErF1XSEUTTXht5mwEAzk01afa5i/vH
7cI2qzy9PuKvuFWmS1guxFnlwZtncgw=
=vnRB
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.9b-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"Fix a regression introduced in 5.9-rc3 which caused a system running
as fully virtualized guest under Xen to crash when using legacy
devices like a floppy"
* tag 'for-linus-5.9b-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events: don't use chip_data for legacy IRQs
Here are some small USB and PHY driver fixes for 5.9-rc8
The PHY driver fix resolves an issue found by Dan Carpenter for a memory
leak.
The USB fixes fall into two groups:
- usb gadget fix from Bryan that is a fix for a previous
security fix that showed up in in-the-wild testing
- usb core driver matching bugfixes. This fixes a bug that has
plagued the both the usbip driver and syzbot testing tools
this -rc release cycle. All is now working properly so usbip
connections will work, and syzbot can get back to fuzzing USB
drivers properly.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX3iJwg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymhTACfYc818o/wXpEwc6pr3ABAdDy2U1UAnRb0PwZf
FJeW+3sSUbM8wzn+SAc7
=/rl/
-----END PGP SIGNATURE-----
Merge tag 'usb-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY fixes from Greg KH:
"Here are some small USB and PHY driver fixes for 5.9-rc8
The PHY driver fix resolves an issue found by Dan Carpenter for a
memory leak.
The USB fixes fall into two groups:
- usb gadget fix from Bryan that is a fix for a previous security fix
that showed up in in-the-wild testing
- usb core driver matching bugfixes. This fixes a bug that has
plagued the both the usbip driver and syzbot testing tools this -rc
release cycle. All is now working properly so usbip connections
will work, and syzbot can get back to fuzzing USB drivers properly.
All have been in linux-next for a while with no reported issues"
* tag 'usb-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usbcore/driver: Accommodate usbip
usbcore/driver: Fix incorrect downcast
usbcore/driver: Fix specific driver selection
Revert "usbip: Implement a match function to fix usbip"
USB: gadget: f_ncm: Fix NDP16 datagram validation
phy: ti: am654: Fix a leak in serdes_am654_probe()
Pull i2c fixes from Wolfram Sang:
"Some more driver fixes for i2c"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: npcm7xx: Clear LAST bit after a failed transaction.
i2c: cpm: Fix i2c_ram structure
i2c: i801: Exclude device from suspend direct complete optimization
Pull input fixes from Dmitry Torokhov:
"A couple more driver quirks, now enabling newer trackpoints from
Synaptics for real"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: i8042 - add nopnp quirk for Acer Aspire 5 A515
Input: trackpoint - enable Synaptics trackpoints
One of the entries has three fields "mistake||correction||correction"
rather than the expected two fields "mistake||correction". Fix it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200930234359.255295-1-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
memalloc_nocma_{save/restore} APIs can be used to skip page allocation
on CMA area, but, there is a missing case and the page on CMA area could
be allocated even if APIs are used. This patch handles this case to fix
the potential issue.
For now, these APIs are used to prevent long-term pinning on the CMA
page. When the long-term pinning is requested on the CMA page, it is
migrated to the non-CMA page before pinning. This non-CMA page is
allocated by using memalloc_nocma_{save/restore} APIs. If APIs doesn't
work as intended, the CMA page is allocated and it is pinned for a long
time. This long-term pin for the CMA page causes cma_alloc() failure
and it could result in wrong behaviour on the device driver who uses the
cma_alloc().
Missing case is an allocation from the pcplist. MIGRATE_MOVABLE pcplist
could have the pages on CMA area so we need to skip it if ALLOC_CMA
isn't specified.
Fixes: 8510e69c8e (mm/page_alloc: fix memalloc_nocma_{save/restore} APIs)
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Link: https://lkml.kernel.org/r/1601429472-12599-1-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The routine that applies debug flags to the kmem_cache slabs
inadvertantly prevents non-debug flags from being applied to those
same objects. That is, if slub_debug=<flag>,<slab> is specified,
non-debugged slabs will end up having flags of zero, and the slabs
may be unusable.
Fix this by including the input flags for non-matching slabs with the
contents of slub_debug, so that the caches are created as expected
alongside any debugging options that may be requested. With this, we
can remove the check for a NULL slub_debug_string, since it's covered
by the loop itself.
Fixes: e17f1dfba3 ("mm, slub: extend slub_debug syntax for multiple blocks")
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Kees Cook <keescook@chromium.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Link: https://lkml.kernel.org/r/20200930161931.28575-1-farman@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Fix synchronization of VTTBR update on TLB invalidation for nVHE systems
-----BEGIN PGP SIGNATURE-----
iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAl91qtQPHG1hekBrZXJu
ZWwub3JnAAoJECPQ0LrRPXpD2eoQAKEpLbbWycXVKikz+O1yev8EELmWMpvV/7uM
Q+4+FjO2swcb5FEPBw6hicZKXIFRi7AP3xFp6hKuWyLfdnYST+WOf5KCI1DcDdG+
/+5bpiS9F1Z+K9Inm6XwpXCnWFuo1P8i1T65mT5HKIm/9+zRwFY5X8svXXvnP4h1
OVgDSI+8jn14yf9aMnvznmvAiSN9GXiVt4v3h9W/1B5FWw3sUT1bTdFIwjh4q7M5
Q32fLeWYdLqTnFOaYtLJNRElE9JSUFkwNpSg1nqoFUH+8gK5oBEEnhzdPzJ9figz
tXrMKlWylswX3ySHSe1L2m9hekwwF3p/h3r4QlpbR2feI8jhOG9mG1YNvPSCdgKh
xWDXWLUnymw4EZGyREeFdMe26gg4xVKqNnVB7Na3PFOSQklg6oqdcUyQccgyWd/6
i8ePA+djVFA/C+iVanv/xphAalT0DmNEe3isBSxkt0RZcrLoCDBoOsTRTRQv8d+y
xBwl3k/DAfGtYjJwntxUNjuQUOzn9E3cc/L/z4Y0ON+sYGzDbv9cPU2oMNyrqFTj
/AZVumCxz3gjjBah62iu7m0hkXIrh7H86ua/dAn/CC0dtAAcANQn+2373C02IPN9
ntCEjc+8aMdw4yph31Ngxd/IT6CQxCOpVJd++kzP5BpLvysUsUGy1M/3Hsd1c88v
hKWU5aS4
=YFeP
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
KVM/arm64 fixes for 5.9, take #3
- Fix synchronization of VTTBR update on TLB invalidation for nVHE systems
The PFEC_MASK and PFEC_MATCH fields in the VMCS reverse the meaning of
the #PF intercept bit in the exception bitmap when they do not match.
This means that, if PFEC_MASK and/or PFEC_MATCH are set, the
hypervisor can get a vmexit for #PF exceptions even when the
corresponding bit is clear in the exception bitmap.
This is unexpected and is promptly detected by a WARN_ON_ONCE.
To fix it, reset PFEC_MASK and PFEC_MATCH when the #PF intercept
is disabled (as is common with enable_ept && !allow_smaller_maxphyaddr).
Reported-by: Qian Cai <cai@redhat.com>>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Fix a mux problem for I2C in the MVEBU driver.
- Fix a really hairy inversion problem in the Intel Cherryview
driver.
- Fix the register for the sdc2_clk in the Qualcomm SM8250
driver.
- Check the virtual GPIO boot failur in the Mediatek driver.
-----BEGIN PGP SIGNATURE-----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=rZhj
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Some pin control fixes here. All of them are driver fixes, the Intel
Cherryview being the most interesting one.
- Fix a mux problem for I2C in the MVEBU driver.
- Fix a really hairy inversion problem in the Intel Cherryview
driver.
- Fix the register for the sdc2_clk in the Qualcomm SM8250 driver.
- Check the virtual GPIO boot failur in the Mediatek driver"
* tag 'pinctrl-v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: mediatek: check mtk_is_virt_gpio input parameter
pinctrl: qcom: sm8250: correct sdc2_clk
pinctrl: cherryview: Preserve CHV_PADCTRL1_INVRXTX_TXDATA flag on GPIOs
pinctrl: mvebu: Fix i2c sda definition for 98DX3236
Two patches in driver frameworks. The iscsi one corrects a bug
induced by a BPF change to network locking and the other is a
regression we introduced.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX3d3QyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishWv9AP9lxJ1U
32sHZ5d46Idsd8ipfYmEqCh8s/9cTvx9VEwmdQEAzeH3nvAEJXX4YEzmnsKeF6Nf
IFLoRQ7RLEhfmNfJ/L0=
=96lr
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two patches in driver frameworks. The iscsi one corrects a bug induced
by a BPF change to network locking and the other is a regression we
introduced"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: iscsi: iscsi_tcp: Avoid holding spinlock while calling getpeername()
scsi: target: Fix lun lookup for TARGET_SCF_LOOKUP_LUN_FROM_TAG case
Pull epoll fixes from Al Viro:
"Several race fixes in epoll"
* 'work.epoll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ep_create_wakeup_source(): dentry name can change under you...
epoll: EPOLL_CTL_ADD: close the race in decision to take fast path
epoll: replace ->visited/visited_list with generation count
epoll: do not insert into poll queues until all sanity checks are done
I have two fixes for this week:
* The addition of a symbol export for clint_time_val, which has been inlined
into some timex functions and can be used by drivers.
* A fix to avoid calling get_cycles() before the timers have been probed.
These both only effect !MMU systems.
-----BEGIN PGP SIGNATURE-----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=C3QV
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"Two fixes for this week:
- The addition of a symbol export for clint_time_val, which has been
inlined into some timex functions and can be used by drivers.
- A fix to avoid calling get_cycles() before the timers have been
probed.
These both only effect !MMU systems"
* tag 'riscv-for-linus-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Check clint_time_val before use
clocksource: clint: Export clint_time_val for modules
-----BEGIN PGP SIGNATURE-----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=MT2i
-----END PGP SIGNATURE-----
Merge tag 'for-5.9-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Two more fixes.
One is for a lockdep warning/lockup (also caught by syzbot), that one
has been seen in practice. Regarding the other syzbot reports
mentioned last time, they don't seem to be urgent and reliably
reproducible so they'll be fixed later.
The second fix is for a potential corruption when device replace
finishes and the in-memory state of trim is not copied to the new
device"
* tag 'for-5.9-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix filesystem corruption after a device replace
btrfs: move btrfs_rm_dev_replace_free_srcdev outside of all locks
btrfs: move btrfs_scratch_superblocks into btrfs_dev_replace_finishing
- Fix up RCU usage for cpuidle on the ARM imx6q platform (Ulf
Hansson).
- Fix typo in the PM documentation (Yoann Congal).
- Add return statement that is missing after recent changes
in the intel_pstate driver (Zhang Rui).
-----BEGIN PGP SIGNATURE-----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=uZW1
-----END PGP SIGNATURE-----
Merge tag 'pm-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix one more issue related to the recent RCU-lockdep changes, a
typo in documentation and add a missing return statement to
intel_pstate.
Specifics:
- Fix up RCU usage for cpuidle on the ARM imx6q platform (Ulf
Hansson)
- Fix typo in the PM documentation (Yoann Congal)
- Add return statement that is missing after recent changes in the
intel_pstate driver (Zhang Rui)"
* tag 'pm-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ARM: imx6q: Fixup RCU usage for cpuidle
Documentation: PM: Fix a reStructuredText syntax error
cpufreq: intel_pstate: Fix missing return statement
Here are two small IIO driver fixes for 5.9-rc8 that resolve some
reported issues:
- driver name fixed in one driver
- device name typo fixed
Both have been in linux-next for a while with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX3c1MQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykJIwCfe97UHoOUlJWH5IOM2e0Qfsfk9tAAoND99JYB
LeLRvFzTFwLfmyEjoK4U
=I4IP
-----END PGP SIGNATURE-----
Merge tag 'staging-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull IIO fixes from Greg KH:
"Here are two small IIO driver fixes for 5.9-rc8 that resolve some
reported issues:
- driver name fixed in one driver
- device name typo fixed
Both have been in linux-next for a while with no reported problems"
* tag 'staging-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: adc: qcom-spmi-adc5: fix driver name
iio: adc: ad7124: Fix typo in device name
- Fix compiler warnings on the OMAP when PM is disabled
- Clear the interrupt when setting edge sensitivity on the
Spreadtrum driver.
- Fix up spurious interrupts on the TC35894.
- Support threaded interrupts on the Siox controller.
- Fix resource leaks on the mockup driver.
- Fix line event handling in syscall compatible mode
for the character device.
- Fix an unitialized variable in the PCA953A driver.
- Fix access to all GPIO IRQs on the Aspeed AST2600.
- Fix line direction on the AMD FCH driver.
- Use the bitmap API instead of compiler intrinsics for
bit manipulation in the PCA953x driver.
-----BEGIN PGP SIGNATURE-----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=295T
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Some late GPIO fixes for the v5.9 series:
- Fix compiler warnings on the OMAP when PM is disabled
- Clear the interrupt when setting edge sensitivity on the Spreadtrum
driver.
- Fix up spurious interrupts on the TC35894.
- Support threaded interrupts on the Siox controller.
- Fix resource leaks on the mockup driver.
- Fix line event handling in syscall compatible mode for the
character device.
- Fix an unitialized variable in the PCA953A driver.
- Fix access to all GPIO IRQs on the Aspeed AST2600.
- Fix line direction on the AMD FCH driver.
- Use the bitmap API instead of compiler intrinsics for bit
manipulation in the PCA953x driver"
* tag 'gpio-v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: pca953x: Correctly initialize registers 6 and 7 for PCA957x
gpio: pca953x: Use bitmap API over implicit GCC extension
gpio: amd-fch: correct logic of GPIO_LINE_DIRECTION
gpio: aspeed: fix ast2600 bank properties
gpio/aspeed-sgpio: don't enable all interrupts by default
gpio/aspeed-sgpio: enable access to all 80 input & output sgpios
gpio: pca953x: Fix uninitialized pending variable
gpiolib: Fix line event handling in syscall compatible mode
gpio: mockup: fix resource leak in error path
gpio: siox: explicitly support only threaded irqs
gpio: tc35894: fix up tc35894 interrupt configuration
gpio: sprd: Clear interrupt when setting the type as edge
gpio: omap: Fix warnings if PM is disabled
Commit f227e3ec3b ("random32: update the net random state on interrupt
and activity") broke compilation and was temporarily fixed by Linus in
83bdc7275e ("random32: remove net_rand_state from the latent entropy
gcc plugin") by entirely moving net_rand_state out of the things handled
by the latent_entropy GCC plugin.
From what I understand when reading the plugin code, using the
__latent_entropy attribute on a declaration was the wrong part and
simply keeping the __latent_entropy attribute on the variable definition
was the correct fix.
Fixes: 83bdc7275e ("random32: remove net_rand_state from the latent entropy gcc plugin")
Acked-by: Willy Tarreau <w@1wt.eu>
Cc: Emese Revfy <re.emese@gmail.com>
Signed-off-by: Thibaut Sautereau <thibaut.sautereau@ssi.gouv.fr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit ea426c2a7d ("mm: memcg: prepare for byte-sized vmstat
items") the write side of slab counters accepts a value in bytes and
converts it to pages. It happens in __mod_node_page_state().
However a non-SMP version of __mod_node_page_state() doesn't perform
this conversion. It leads to incorrect (unrealistically high) slab
counters values. Fix this by adding a similar conversion to the non-SMP
version of __mod_node_page_state().
Signed-off-by: Roman Gushchin <guro@fb.com>
Reported-and-tested-by: Bastian Bittorf <bb@npl.de>
Fixes: ea426c2a7d ("mm: memcg: prepare for byte-sized vmstat items")
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The pipe splice code still used the old model of waiting for pipe IO by
using a non-specific "pipe_wait()" that waited for any pipe event to
happen, which depended on all pipe IO being entirely serialized by the
pipe lock. So by checking the state you were waiting for, and then
adding yourself to the wait queue before dropping the lock, you were
guaranteed to see all the wakeups.
Strictly speaking, the actual wakeups were not done under the lock, but
the pipe_wait() model still worked, because since the waiter held the
lock when checking whether it should sleep, it would always see the
current state, and the wakeup was always done after updating the state.
However, commit 0ddad21d3e ("pipe: use exclusive waits when reading or
writing") split the single wait-queue into two, and in the process also
made the "wait for event" code wait for _two_ wait queues, and that then
showed a race with the wakers that were not serialized by the pipe lock.
It's only splice that used that "pipe_wait()" model, so the problem
wasn't obvious, but Josef Bacik reports:
"I hit a hang with fstest btrfs/187, which does a btrfs send into
/dev/null. This works by creating a pipe, the write side is given to
the kernel to write into, and the read side is handed to a thread that
splices into a file, in this case /dev/null.
The box that was hung had the write side stuck here [pipe_write] and
the read side stuck here [splice_from_pipe_next -> pipe_wait].
[ more details about pipe_wait() scenario ]
The problem is we're doing the prepare_to_wait, which sets our state
each time, however we can be woken up either with reads or writes. In
the case above we race with the WRITER waking us up, and re-set our
state to INTERRUPTIBLE, and thus never break out of schedule"
Josef had a patch that avoided the issue in pipe_wait() by just making
it set the state only once, but the deeper problem is that pipe_wait()
depends on a level of synchonization by the pipe mutex that it really
shouldn't. And the whole "wait for any pipe state change" model really
isn't very good to begin with.
So rather than trying to work around things in pipe_wait(), remove that
legacy model of "wait for arbitrary pipe event" entirely, and actually
create functions that wait for the pipe actually being readable or
writable, and can do so without depending on the pipe lock serializing
everything.
Fixes: 0ddad21d3e ("pipe: use exclusive waits when reading or writing")
Link: https://lore.kernel.org/linux-fsdevel/bfa88b5ad6f069b2b679316b9e495a970130416c.1601567868.git.josef@toxicpanda.com/
Reported-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-and-tested-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Including:
- Fix a device reference counting bug in the Exynos IOMMU
driver.
- Lockdep fix for the Intel VT-d driver.
- Fix a bug in the AMD IOMMU driver which caused corruption of
the IVRS ACPI table and caused IOMMU driver initialization
failures in kdump kernels.
-----BEGIN PGP SIGNATURE-----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=3prr
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v5.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Fix a device reference counting bug in the Exynos IOMMU driver.
- Lockdep fix for the Intel VT-d driver.
- Fix a bug in the AMD IOMMU driver which caused corruption of the IVRS
ACPI table and caused IOMMU driver initialization failures in kdump
kernels.
* tag 'iommu-fixes-v5.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Fix lockdep splat in iommu_flush_dev_iotlb()
iommu/amd: Fix the overwritten field in IVMD header
iommu/exynos: add missing put_device() call in exynos_iommu_of_xlate()
kernel memory turned out to be too restrictive. Relax the permission
check to permit the ACPI core to map kernel memory used for table
overrides.
-----BEGIN PGP SIGNATURE-----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=wQ+N
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"A previous commit to prevent AML memory opregions from accessing the
kernel memory turned out to be too restrictive. Relax the permission
check to permit the ACPI core to map kernel memory used for table
overrides"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: permit ACPI core to map kernel memory used for table overrides
vmwgfx:
- fix a regression due to TTM refactor
amdgpu:
- Fix potential double free in userptr handling
- Sienna Cichlid and Navy Flounder udpates
- Add Sienna Cichlid PCI IDs
- Drop experimental flag for navi12
- Raven fixes
- Renoir fixes
- HDCP fix
- DCN3 fix for clang and older versions of gcc
- Fix a runtime pm refcount issue
-----BEGIN PGP SIGNATURE-----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=WyKj
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2020-10-01-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"AMD and vmwgfx fixes.
Just dequeuing these a bit early as the AMD ones are bit larger than
I'd prefer, but Alex missed last week so it's a double set of fixes.
The larger ones are just register header fixes for the new chips that
were just introduced in rc1 along with some new PCI IDs for new hw.
Otherwise it is usual fixes.
The vmwgfx fix was due to some testing I was doing and found we
weren't booting properly, vmware had the fix internally so hurried it
vmwgfx:
- fix a regression due to TTM refactor
amdgpu:
- Fix potential double free in userptr handling
- Sienna Cichlid and Navy Flounder udpates
- Add Sienna Cichlid PCI IDs
- Drop experimental flag for navi12
- Raven fixes
- Renoir fixes
- HDCP fix
- DCN3 fix for clang and older versions of gcc
- Fix a runtime pm refcount issue"
* tag 'drm-fixes-2020-10-01-1' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: disable gfxoff temporarily for navy_flounder
drm/amd/pm: setup APU dpm clock table in SMU HW initialization
drm/vmwgfx: Fix error handling in get_node
drm/amd/display: remove duplicate call to rn_vbios_smu_get_smu_version()
drm/amdgpu/swsmu/smu12: fix force clock handling for mclk
drm/amdgpu: restore proper ref count in amdgpu_display_crtc_set_config
drm/amdgpu/display: fix CFLAGS setup for DCN30
drm/amd/display: fix return value check for hdcp_work
drm/amdgpu: remove gpu_info fw support for sienna_cichlid etc.
drm/amd/pm: Removed fixed clock in auto mode DPM
drm/amdgpu: remove experimental flag from navi12
drm/amdgpu: add device ID for sienna_cichlid (v2)
drm/amdgpu: use the AV1 defines for VCN 3.0
drm/amdgpu: add VCN 3.0 AV1 registers
drm/amdgpu: add the GC 10.3 VRS registers
drm/amdgpu: prevent double kfree ttm->sg
- Fix temp buffer accounting that caused a WARNING for
ftrace_dump_on_opps()
- Move the recursion check in one of the function callback helpers to the
beginning of the function, as if the rcu_is_watching() gets traced, it
will cause a recursive loop that will crash the kernel.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCX3UZ7hQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qlelAP4nzEIyE7s8HkKHo+IEvzEiYL523Xq7
zrTm27XnLjZ+EQD9ECbtea9me8kL+zBcG8H3Wu/ykN15LIT2ZsvVTrWYmwI=
=eTh4
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Two tracing fixes:
- Fix temp buffer accounting that caused a WARNING for
ftrace_dump_on_opps()
- Move the recursion check in one of the function callback helpers to
the beginning of the function, as if the rcu_is_watching() gets
traced, it will cause a recursive loop that will crash the kernel"
* tag 'trace-v5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Move RCU is watching check after recursion check
tracing: Fix trace_find_next_entry() accounting of temp buffer size
Since commit c330fb1ddc ("XEN uses irqdesc::irq_data_common::handler_data to store a per interrupt XEN data pointer which contains XEN specific information.")
Xen is using the chip_data pointer for storing IRQ specific data. When
running as a HVM domain this can result in problems for legacy IRQs, as
those might use chip_data for their own purposes.
Use a local array for this purpose in case of legacy IRQs, avoiding the
double use.
Cc: stable@vger.kernel.org
Fixes: c330fb1ddc ("XEN uses irqdesc::irq_data_common::handler_data to store a per interrupt XEN data pointer which contains XEN specific information.")
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Stefan Bader <stefan.bader@canonical.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20200930091614.13660-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Commit 387caf0b75 ("iommu/amd: Treat per-device exclusion
ranges as r/w unity-mapped regions") accidentally overwrites
the 'flags' field in IVMD (struct ivmd_header) when the I/O
virtualization memory definition is associated with the
exclusion range entry. This leads to the corrupted IVMD table
(incorrect checksum). The kdump kernel reports the invalid checksum:
ACPI BIOS Warning (bug): Incorrect checksum in table [IVRS] - 0x5C, should be 0x60 (20200717/tbprint-177)
AMD-Vi: [Firmware Bug]: IVRS invalid checksum
Fix the above-mentioned issue by modifying the 'struct unity_map_entry'
member instead of the IVMD header.
Cleanup: The *exclusion_range* functions are not used anymore, so
get rid of them.
Fixes: 387caf0b75 ("iommu/amd: Treat per-device exclusion ranges as r/w unity-mapped regions")
Reported-and-tested-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20200926102602.19177-1-adrianhuang0701@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit a0e50aa3f4 ("KVM: arm64: Factor out stage 2 page table
data from struct kvm") dropped the ISB after __load_guest_stage2(),
only leaving the one that is required when the speculative AT
workaround is in effect.
As Andrew points it: "This alternative is 'backwards' to avoid a
double ISB as there is one in __load_guest_stage2 when the workaround
is active."
Restore the missing ISB, conditionned on the AT workaround not being
active.
Fixes: a0e50aa3f4 ("KVM: arm64: Factor out stage 2 page table data from struct kvm")
Reported-by: Andrew Scull <ascull@google.com>
Reported-by: Thomas Tai <thomas.tai@oracle.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
When driver has been converted to the bitmap API the non-bitmap functions
started behaving differently on 32-bit BE architectures since the bytes in
two consequent unsigned longs are in different order in comparison to byte
array. Hence if the chip had had more than 32 lines the memset() call over
it would have not set up upper lines correctly.
Although it's currently a theoretical case (no supported chips of this type
has 32+ lines), it's better to provide a clean code to avoid people thinking
this is okay and potentially producing not fully working things.
Fixes: 35d13d9489 ("gpio: pca953x: convert to use bitmap API")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20200930142013.59247-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In IRQ handler we have to clear bitmap before use. Currently
the GCC extension has been used for that. For sake of the consistency
switch to bitmap API. As expected bloat-o-meter shows no difference
in the object size.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20200930142013.59247-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
check mtk_is_virt_gpio input parameter,
virtual gpio need to support eint mode.
add error handler for the ko case
to fix this boot fail:
pc : mtk_is_virt_gpio+0x20/0x38 [pinctrl_mtk_common_v2]
lr : mtk_gpio_get_direction+0x44/0xb0 [pinctrl_paris]
Fixes: edd5464650 ("pinctrl: mediatek: avoid virtual gpio trying to set reg")
Signed-off-by: Hanks Chen <hanks.chen@mediatek.com>
Acked-by: Sean Wang <sean.wang@kernel.org>
Singed-off-by: Jie Yang <sin_jieyang@mediatek.com>
Link: https://lore.kernel.org/r/1597922546-29633-1-git-send-email-hanks.chen@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Jonathan reports that the strict policy for memory mapped by the
ACPI core breaks the use case of passing ACPI table overrides via
initramfs. This is due to the fact that the memory type used for
loading the initramfs in memory is not recognized as a memory type
that is typically used by firmware to pass firmware tables.
Since the purpose of the strict policy is to ensure that no AML or
other ACPI code can manipulate any memory that is used by the kernel
to keep its internal state or the state of user tasks, we can relax
the permission check, and allow mappings of memory that is reserved
and marked as NOMAP via memblock, and therefore not covered by the
linear mapping to begin with.
Fixes: 1583052d11 ("arm64/acpi: disallow AML memory opregions to access kernel memory")
Fixes: 325f5585ec ("arm64/acpi: disallow writeable AML opregion mapping for EFI code regions")
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20200929132522.18067-1-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
- Make sure DRAM and ChipID region doesn't get disabled on Exynos
- Fix a SATA failure on Tegra
- Fix the emac_ptp clk divider on stratix10
-----BEGIN PGP SIGNATURE-----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=CJSx
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Another batch of clk driver fixes:
- Make sure DRAM and ChipID region doesn't get disabled on Exynos
- Fix a SATA failure on Tegra
- Fix the emac_ptp clk divider on stratix10"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: socfpga: stratix10: fix the divider for the emac_ptp_free_clk
clk: samsung: exynos4: mark 'chipid' clock as CLK_IGNORE_UNUSED
clk: tegra: Fix missing prototype for tegra210_clk_register_emc()
clk: tegra: Always program PLL_E when enabled
clk: tegra: Capitalization fixes
clk: samsung: Keep top BPLL mux on Exynos542x enabled
The NoMMU kernel is broken for QEMU virt machine from Linux-5.9-rc6
because clint_time_val is used even before CLINT driver is probed
at following places:
1. rand_initialize() calls get_cycles() which in-turn uses
clint_time_val
2. boot_init_stack_canary() calls get_cycles() which in-turn
uses clint_time_val
The issue#1 (above) is fixed by providing custom random_get_entropy()
for RISC-V NoMMU kernel. For issue#2 (above), we remove dependency of
boot_init_stack_canary() on get_cycles() and this is aligned with the
boot_init_stack_canary() implementations of ARM, ARM64 and MIPS kernel.
Fixes: d5be89a8d1 ("RISC-V: Resurrect the MMIO timer implementation for M-mode systems")
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
We use a device's allocation state tree to track ranges in a device used
for allocated chunks, and we set ranges in this tree when allocating a new
chunk. However after a device replace operation, we were not setting the
allocated ranges in the new device's allocation state tree, so that tree
is empty after a device replace.
This means that a fitrim operation after a device replace will trim the
device ranges that have allocated chunks and extents, as we trim every
range for which there is not a range marked in the device's allocation
state tree. It is also important during chunk allocation, since the
device's allocation state is used to determine if a range is already
allocated when allocating a new chunk.
This is trivial to reproduce and the following script triggers the bug:
$ cat reproducer.sh
#!/bin/bash
DEV1="/dev/sdg"
DEV2="/dev/sdh"
DEV3="/dev/sdi"
wipefs -a $DEV1 $DEV2 $DEV3 &> /dev/null
# Create a raid1 test fs on 2 devices.
mkfs.btrfs -f -m raid1 -d raid1 $DEV1 $DEV2 > /dev/null
mount $DEV1 /mnt/btrfs
xfs_io -f -c "pwrite -S 0xab 0 10M" /mnt/btrfs/foo
echo "Starting to replace $DEV1 with $DEV3"
btrfs replace start -B $DEV1 $DEV3 /mnt/btrfs
echo
echo "Running fstrim"
fstrim /mnt/btrfs
echo
echo "Unmounting filesystem"
umount /mnt/btrfs
echo "Mounting filesystem in degraded mode using $DEV3 only"
wipefs -a $DEV1 $DEV2 &> /dev/null
mount -o degraded $DEV3 /mnt/btrfs
if [ $? -ne 0 ]; then
dmesg | tail
echo
echo "Failed to mount in degraded mode"
exit 1
fi
echo
echo "File foo data (expected all bytes = 0xab):"
od -A d -t x1 /mnt/btrfs/foo
umount /mnt/btrfs
When running the reproducer:
$ ./replace-test.sh
wrote 10485760/10485760 bytes at offset 0
10 MiB, 2560 ops; 0.0901 sec (110.877 MiB/sec and 28384.5216 ops/sec)
Starting to replace /dev/sdg with /dev/sdi
Running fstrim
Unmounting filesystem
Mounting filesystem in degraded mode using /dev/sdi only
mount: /mnt/btrfs: wrong fs type, bad option, bad superblock on /dev/sdi, missing codepage or helper program, or other error.
[19581.748641] BTRFS info (device sdg): dev_replace from /dev/sdg (devid 1) to /dev/sdi started
[19581.803842] BTRFS info (device sdg): dev_replace from /dev/sdg (devid 1) to /dev/sdi finished
[19582.208293] BTRFS info (device sdi): allowing degraded mounts
[19582.208298] BTRFS info (device sdi): disk space caching is enabled
[19582.208301] BTRFS info (device sdi): has skinny extents
[19582.212853] BTRFS warning (device sdi): devid 2 uuid 1f731f47-e1bb-4f00-bfbb-9e5a0cb4ba9f is missing
[19582.213904] btree_readpage_end_io_hook: 25839 callbacks suppressed
[19582.213907] BTRFS error (device sdi): bad tree block start, want 30490624 have 0
[19582.214780] BTRFS warning (device sdi): failed to read root (objectid=7): -5
[19582.231576] BTRFS error (device sdi): open_ctree failed
Failed to mount in degraded mode
So fix by setting all allocated ranges in the replace target device when
the replace operation is finishing, when we are holding the chunk mutex
and we can not race with new chunk allocations.
A test case for fstests follows soon.
Fixes: 1c11b63eff ("btrfs: replace pending/pinned chunks lists with io tree")
CC: stable@vger.kernel.org # 5.2+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The commit eb1f00237a ("lockdep,trace: Expose tracepoints"), started to
expose us for tracepoints. For imx6q cpuidle, this leads to an RCU splat
according to below.
[6.870684] [<c0db7690>] (_raw_spin_lock) from [<c011f6a4>] (imx6q_enter_wait+0x18/0x9c)
[6.878846] [<c011f6a4>] (imx6q_enter_wait) from [<c09abfb0>] (cpuidle_enter_state+0x168/0x5e4)
To fix the problem, let's assign the corresponding idlestate->flags the
CPUIDLE_FLAG_RCU_IDLE bit, which enables us to call rcu_idle_enter|exit()
at the proper point.
Reported-by: Dong Aisheng <aisheng.dong@nxp.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>