Граф коммитов

144 Коммитов

Автор SHA1 Сообщение Дата
Guenter Roeck 79ffe8594f hwmon: Driver for Linear Technologies LTC4222
Driver Linear Technologies LTC4222 Dual Hot Swap Controller
The driver currently only supports voltage monitoring, not voltage control.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-03-03 08:01:03 -08:00
William Markezana f060c658b8 hwmon: (htu21) Add Measurement Specialties HTU21D support
Signed-off-by: William Markezana <william.markezana@meas-spec.com>
[Guenter Roeck - minor formatting changes]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-08-29 09:09:12 -07:00
Arnaud Ebalard 594fbe713b Add support for GMT G762/G763 PWM fan controllers
GMT G762/763 fan speed PWM controller is connected directly to a fan
and performs closed-loop or open-loop control of the fan speed. Two
modes - PWM or DC - are supported by the chip. Introduced driver
provides various knobs to control the operations of the chip (via
sysfs interface). Specific characteristics of the system can be passed
either using board init code or via DT. Documentation for both the
driver and DT bindings are also provided.

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Tested-by: Simon Guinot <simon.guinot@sequanux.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-06-27 10:31:42 -07:00
Linus Torvalds 151173e8ce Highlights:
- OpenFirmware/DeviceTree support for the Power Supply core: the core now
   automatically populates supplied_from hierarchy from the device tree.
   With these patches chargers and batteries can now lookup each other
   without the board files support shim. Rhyland Klein at NVIDIA did the
   work;
 
 - New ST-Ericsson ABX500 hwmon driver. The driver is heavily using the
   AB85xx core and depends on some recent changes to it, so that is why the
   driver comes through the battery tree. It has an appropriate ack from
   the hwmon maintainer (i.e. Guenter Roeck). Martin Persson at ST-Ericsson
   and Hongbo Zhang at Linaro authored the driver;
 
 - Final bits to sync AB85xx ST-Ericsson changes into mainline. The changes
   touch mfd parts, but these were acked by the appropriate MFD maintainer
   (i.e. Samuel Ortiz). Lee Jones at Linaro did most of the work and lead
   the submission process.
 
 Minor changes, but still worth mentioning:
 
 - Battery temperature reporting fix for Nokia N900 phones;
 - Versatile Express poweroff driver moved into drivers/power/reset/.
 - Tree-wise: use devm_kzalloc() where appropriate;
 - Tree-wise: dev_pm_ops cleanups/fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJRf1BPAAoJEGgI9fZJve1bwyoP/3Gv+qStzbN7mUtIVEvH3EAe
 aVJwlODFzEZjk5xoiw7Dc8PuBE8O948hWOnQyCuUQ8+OfK6SyNIjexPYy3Z25a0F
 cX9JMj7rtPWHvxo2q/YuKwBPZoxj/JIPyxwUT7akwXoHAV059fvcy9R1DfFX2Qur
 hSP0NXTg+guvEpxGV4bC2l+LWZPmDFK9n0RsorttYaBvsiRDWl0c2TY2byofYlBw
 ++m/rI8Qgl8db8pKq/WDue62HtMt3kmZj6ZIgej3Wb0+GIRmYHMyPIyAkf82Wlw2
 g2sGNPT7cstrSNOozegzJ7UghJObcYDFf10NCgvFMNjmAT1dAwdneQHEWy6Ek7pT
 9X3e0LmaFqVbufFp4xFiLkMutsCLLTnGyXIbzs7RkTm3XBVIUqiDWtI6I6X44ohG
 6PJn8vUlufu7owXrqFpgSBar2U1vfoQdhInmz4hbQeff0qn2nX/BGNwhxYptZ549
 TudsI9WGzJ6fvYQ56zh6+BfiA0FmjhUiSKOtrXImrhxE6gUf3IOJyMQlkxLx5t8D
 uuhBmO0J6kDi2lqF6alOEo+UDefJj4mUJn2tnIdis90+lNQlSV02GEtiwFT1zt1z
 LFW0xshQkxZ4lMa28h35FB1/Z11ApUOe4Es+OKADDJhAnxdZzXcAwIRyPRRPgdsy
 jTnJno+Kxk9wXLcekxVE
 =5BdE
 -----END PGP SIGNATURE-----

Merge tag 'for-v3.10' of git://git.infradead.org/battery-2.6

Pull battery updates from Anton Vorontsov:
 "Highlights:

   - OpenFirmware/DeviceTree support for the Power Supply core: the core
     now automatically populates supplied_from hierarchy from the device
     tree.  With these patches chargers and batteries can now lookup
     each other without the board files support shim.  Rhyland Klein at
     NVIDIA did the work

   - New ST-Ericsson ABX500 hwmon driver.  The driver is heavily using
     the AB85xx core and depends on some recent changes to it, so that
     is why the driver comes through the battery tree.  It has an
     appropriate ack from the hwmon maintainer (i.e.  Guenter Roeck).
     Martin Persson at ST-Ericsson and Hongbo Zhang at Linaro authored
     the driver

   - Final bits to sync AB85xx ST-Ericsson changes into mainline.  The
     changes touch mfd parts, but these were acked by the appropriate
     MFD maintainer (ie Samuel Ortiz).  Lee Jones at Linaro did most of
     the work and lead the submission process.

  Minor changes, but still worth mentioning:

   - Battery temperature reporting fix for Nokia N900 phones
   - Versatile Express poweroff driver moved into drivers/power/reset/
   - Tree-wide: use devm_kzalloc() where appropriate
   - Tree-wide: dev_pm_ops cleanups/fixes"

* tag 'for-v3.10' of git://git.infradead.org/battery-2.6: (112 commits)
  pm2301-charger: Fix suspend/resume
  charger-manager: Use kmemdup instead of kzalloc + memcpy
  power_supply: Populate supplied_from hierarchy from the device tree
  power_supply: Add core support for supplied_from
  power_supply: Define Binding for power-supplies
  rx51_battery: Fix reporting temperature
  hwmon: Add ST-Ericsson ABX500 hwmon driver
  ab8500_bmdata: Export abx500_res_to_temp tables for hwmon
  ab8500_{bmdata,fg}: Add const attributes to some data arrays
  ab8500_bmdata: Eliminate CamelCase warning of some variables
  ab8500_btemp: Make ab8500_btemp_get* interfaces public
  goldfish_battery: Use resource_size()
  lp8788-charger: Use PAGE_SIZE for the sysfs read operation
  max8925_power: Use devm_kzalloc()
  da9030_battery: Use devm_kzalloc()
  da9052-battery: Use devm_kzalloc()
  ds2760_battery: Use devm_kzalloc()
  ds2780_battery: Use devm_kzalloc()
  gpio-charger: Use devm_kzalloc()
  isp1704_charger: Use devm_kzalloc()
  ...
2013-04-30 15:15:24 -07:00
Linus Torvalds fdc719b63a Staging driver tree update for 3.10-rc1
Here's the big staging driver tree update for 3.10-rc1
 
 This update contains loads of comedi driver cleanups and fixes in here,
 iio updates, android driver changes, and other various staging driver
 cleanups.
 
 Thanks to some drivers being removed, and the comedi driver cleanups, we
 have removed more code than we added:
  627 files changed, 65145 insertions(+), 76321 deletions(-)
 which is always nice to see.
 
 All of these have been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlF+nF8ACgkQMUfUDdst+ynlIwCfYm2pSkA0w1K56mftq1T0hpMH
 b9IAmwQlfEHSIKeAxqRO3RRrfLu5XD7L
 =Jnxr
 -----END PGP SIGNATURE-----

Merge tag 'staging-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver tree update from Greg Kroah-Hartman:
 "Here's the big staging driver tree update for 3.10-rc1

  This update contains loads of comedi driver cleanups and fixes in
  here, iio updates, android driver changes, and other various staging
  driver cleanups.

  Thanks to some drivers being removed, and the comedi driver cleanups,
  we have removed more code than we added:

   627 files changed, 65145 insertions(+), 76321 deletions(-)

  which is always nice to see.

  All of these have been in linux-next for a while."

* tag 'staging-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (940 commits)
  staging: comedi: ni_labpc: fix legacy driver build
  staging: comedi: das800: cleanup the cio-das802/16 fifo comments
  staging: comedi: das800: rename CamelCase vars in das800_ai_do_cmd()
  staging: comedi: das800: tidy up the private data
  staging: comedi: das800: tidy up das800_interrupt()
  staging: comedi: das800: tidy up das800_ai_insn_read()
  staging: comedi: das800: tidy up das800_di_insn_bits()
  staging: comedi: das800: tidy up das800_do_insn_bits()
  staging: comedi: das800: remove extra divisor calculation call
  staging: comedi: das800: rename {enable,disable}_das800
  staging: comedi: das800: tidy up subdevice init
  staging: comedi: das800: allow attaching without interrupt support
  staging: comedi: das800: interrupts are required for async command support
  staging: comedi: das800: tidy up das800_ai_do_cmdtest()
  staging: comedi: das800: remove 'volatile' on private data variables
  staging: comedi: das800: cleanup the boardinfo
  staging: comedi: das800: cleanup range table declarations
  staging: comedi: das800: introduce das800_ind_{write, read}()
  staging: comedi: das800: remove forward declarations
  staging: comedi: das800: move das800_set_frequency()
  ...
2013-04-29 11:34:17 -07:00
Hongbo Zhang 0bbb06ed56 hwmon: Add ST-Ericsson ABX500 hwmon driver
Each of ST-Ericsson X500 chip set series consists of both ABX500 and DBX500
chips. This is ABX500 hwmon driver, where the abx500.c is a common layer for
all ABX500s, and the ab8500.c is specific for AB8500 chip. Under this designed
structure, other chip specific files can be added simply using the same common
layer abx500.c.

Signed-off-by: Hongbo Zhang <hongbo.zhang@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-04-16 18:27:52 -07:00
Guenter Roeck e1eb49063b hwmon: Add driver for LM95234
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:42 -07:00
Guenter Roeck 9de2e2e84e hwmon: Driver for Nuvoton NCT6775F, NCT6776F, and NCT6779D
This driver will replace the w83627ehf driver for NCT6775F and NCT6776F,
and provides support for NCT6779D.

This patch provides support for voltage monitor attributes.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:38 -07:00
Lars-Peter Clausen 51c2a4871c hwmon: (adt7410) Add support for the adt7310/adt7320
The adt7310/adt7320 is the SPI version of the adt7410/adt7420. The register map
layout is a bit different, i.e. the register addresses differ between the two
variants, but the bit layouts of the individual registers are identical. So both
chip variants can easily be supported by the same driver. The issue of non
matching register address layouts is solved by a simple look-up table which
translates the I2C addresses to the SPI addresses.

The patch moves the bulk of the adt7410 driver to a common module that will be
shared by the adt7410 and adt7310 drivers. This common module implements the
driver logic and uses a set of virtual functions to perform IO access. The
adt7410 and adt7310 driver modules provide proper implementations of these IO
accessor functions for I2C respective SPI.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-04-07 21:16:38 -07:00
Jonathan Cameron 51b53dc991 hwmon: Move the IIO client driver for hwmon out of staging
This driver uses channel maps, defined either through device tree
or platform data, to create a hwmon driver which acts as a client
for the underlying IIO device channels.  Thus a general purpose
IIO adc driver can be used to provide hardware monitoring using a subset
of its channels.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>

--
 The only non move changes here concern the description and changes to the
 dependencies to IIO explicit and hwmon implicit.

 I'm proposing moving this into hwmon on the basis of placing drivers
 based on what they provide rather than what their underlying hardware
 is.

 drivers/hwmon/Kconfig           |   9 ++
 drivers/hwmon/Makefile          |   1 +
 drivers/hwmon/iio_hwmon.c       | 196 ++++++++++++++++++++++++++++++++++++++++
 drivers/staging/iio/Kconfig     |   8 --
 drivers/staging/iio/Makefile    |   2 -
 drivers/staging/iio/iio_hwmon.c | 196 ----------------------------------------
 6 files changed, 206 insertions(+), 206 deletions(-)
2013-03-23 10:08:15 +00:00
Guenter Roeck ceeadc5c51 hwmon: Driver for Texas Instruments INA209
Add support for the TI / Burr-Brown INA209 voltage / current / power
monitor.

Cc: Paul Hays <haysp@magma.net>
Cc: Ira W. Snyder <iws@ovro.caltech.edu>
Tested-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-06 09:57:59 -08:00
Guenter Roeck 5372d2d71c hwmon: Driver for Maxim MAX6697 and compatibles
Add support for MAX6581, MAX6602, MAX6622, MAX6636, MAX6689, MAX6693,
MAX6694, MAX6697, MAX6698, and MAX6699 temperature sensors

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
2013-02-06 09:57:56 -08:00
Linus Torvalds 698d601224 ARM: arm-soc: driver specific changes
A collection of mostly SoC-specific driver updates:
 - a handful of pincontrol and setup changes
 - new drivers for hwmon and reset controller for vexpress
 - timing support updates for OMAP (gpmc and other interfaces)
 - + a collection of smaller cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQySxPAAoJEIwa5zzehBx3NbgP/iI1EFKI8fK6tp7F1EeTwDYK
 tKeKFmx+Lio2z5OF0CS0qK0HODtcS2ifJ5Zz3C9VyiRBNDOuYAvDT+5bIAKsKIo3
 p0mZyYvgdbcxH30EhYY8klaUVwRyc1noxdO8vENdzoAik4EwUv5zXEKAlcBfScrA
 usCW0dhGJYKH73kgLKQvsyE9d/aV0hbcniSYoVHH1G4e6U5vG45y8pqeSrTQxfCP
 nG177/AheoCHoyoh/td0lmkAJsmXM7NpvdJTaAwKgOmEXvOCUwAcuOgOCEuc7sd/
 FG3jGLntcB9z0AtbO/YOl3+110o71KBF7gYrDDEjLD6U7zz7yhcmhGVh+FEnVa0I
 ppgReNN3jZOs7HVlDTvTXLdh5cjZU5JIpLOmHWdERAwkxakDCd07KzPo5g44XTyO
 CzZuqVFU2JNliIujoJHL2Trnj7Q54fWcgHWkWJdWBhJMsxC42xWgaukCaLDHNuBX
 Po5cqOnEnAYA0rgvQxfdfPWzJd/NN/kU/ewun0pwni3+PlzhfxFzTRcLcj4BT4By
 1S2foQUt0CVkswgFdkRlbGolSsXIlOQmKvsd8kvzldDUzn+0cxgwYHzg4T29hlmY
 zv0+sfgSxub68zfodDtdyjBWDCgrSHrf3TGjGD/4/X6Bm9Ss3hRj4LHIM7Z2BX7F
 PJgvGjAZIfuZThLkShLa
 =CwMf
 -----END PGP SIGNATURE-----

Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver specific changes from Olof Johansson:
 "A collection of mostly SoC-specific driver updates:
   - a handful of pincontrol and setup changes
   - new drivers for hwmon and reset controller for vexpress
   - timing support updates for OMAP (gpmc and other interfaces)
   - plus a collection of smaller cleanups"

* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
  ARM: ux500: fix pin warning
  ARM: OMAP2+: tusb6010: generic timing calculation
  ARM: OMAP2+: smc91x: generic timing calculation
  ARM: OMAP2+: onenand: generic timing calculation
  ARM: OMAP2+: gpmc: generic timing calculation
  ARM: OMAP2+: gpmc: handle additional timings
  ARM: OMAP2+: nand: remove redundant rounding
  gpio: samsung: use pr_* instead of printk
  ARM: ux500: fixup magnetometer pins
  ARM: ux500: add STM pin configuration
  ARM: ux500: 8500: add pinctrl support for uart1 and uart2
  ARM: ux500: cosmetic fixups for uart0
  gpio: samsung: Fix input mode setting function for GPIO int
  ARM: SAMSUNG: Insert bitmap_gpio_int member in samsung_gpio_chip
  ARM: ux500: 8500: define SDI sleep states
  ARM: vexpress: Reset driver
  ARM: ux500: 8500: update SKE keypad pinctrl table
  hwmon: Versatile Express hwmon driver
  ARM: ux500: delete duplicate macro
  ARM: ux500: 8500: add IDLE pin configuration for SPI
  ...
2012-12-13 10:59:11 -08:00
Ashish Jangam e597022353 hwmon: DA9055 HWMON driver
This is the HWMON patch for DA9055 PMIC and has got dependency on the
DA9055 MFD core.

This patch monitors the DA9055 PMIC's ADC channels vddout, junction temperature
and auxiliary channels.

This patch is functionally tested on Samsung SMDKV6410.

Signed-off-by: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
[Guenter Roeck: Dropped __devinit, __devexit, __devexit_p]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-12-05 10:55:55 -08:00
Pawel Moll 48ed887724 hwmon: Versatile Express hwmon driver
hwmon framework driver for Versatile Express sensors, providing
information about board level voltage (only when regulator driver
is not configured), currents, temperature and power/energy usage.
Labels for the values can be defined as DT properties.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
2012-10-16 17:12:35 +01:00
Len Brown 29b19e2504 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux into thermal
Conflicts:
	drivers/staging/omap-thermal/omap-thermal-common.
		OMAP supplied dummy TC1 and TC2,
		at the same time that the thermal tree removed them
		from thermal_zone_device_register()

	drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c
		propogate the upstream MAX_IDR_LEVEL re-name
			to prevent a build failure

	Previously-fixed-by: Stephen Rothwell <sfr@canb.auug.org.au>

Signed-off-by: Len Brown <len.brown@intel.com>
2012-10-09 01:35:52 -04:00
Amit Daniel Kachhap c48cbba6fe hwmon: exynos4: move thermal sensor driver to driver/thermal directory
This movement is needed because the hwmon entries and corresponding sysfs
interface is a duplicate of utilities already provided by
driver/thermal/thermal_sys.c.  The goal is to place it in thermal folder
and add necessary functions to use the in-kernel thermal interfaces.

Signed-off-by: Amit Daniel Kachhap <amit.kachhap@linaro.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: SangWook Ju <sw.ju@samsung.com>
Cc: Durgadoss <durgadoss.r@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2012-09-24 14:44:38 +08:00
Vivien Didelot 6c1fe725fd hwmon: add Maxim MAX197 support
The MAX197 is an A/D converter, made by Maxim. This driver currently
supports the MAX197, and MAX199. They are both 8-Channel, Multi-Range,
5V, 12-Bit DAS with 8+4 Bus Interface and Fault Protection.

The available ranges for the MAX197 are {0,-5V} to 5V, and {0,-10V} to
10V, while they are {0,-2V} to 2V, and {0,-4V} to 4V on the MAX199.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-09-23 21:08:33 -07:00
Hartmut Knaack 983b97bed2 hwmon: Driver for ADT7410
This patch brings basic support for the Analog Devices ADT7410 temperature
sensor. The following functionality has been implemented:

  * get current temperature
  * get/set minimum, maximum and critical temperature
  * get/set hysteresis
  * get alarm events for minimum, maximum and critical temperature

All implemented sysfs attributes have been sucessfully tested at temperatures
of 15°C to 40°C.

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-09-23 21:08:33 -07:00
Iain Paton 27f8b13555 hwmon: Honeywell Humidicon HIH-6130/HIH-6131 humidity and temperature sensor driver
This is a new driver for the Honeywell Humidicon HIH-6130/HIH-6131 humidity sensor.

The driver is based on the existing Sensiron sht21 driver with the necessary changes
to the probe, update_measurements and conversion functions necessary to use the
Honeywell sensors.

There's no difference between the 6130 & 6131 other than the 6131 having an external
condensation filter attached.

Signed-off-by: Iain Paton <ipaton0@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-07-21 21:48:44 -07:00
Ashish Jangam e41f6432d1 hwmon: Driver for DA9052/53 PMIC
The DA9052 PMIC provides an Analogue to Digital Converter with 10 bits
resolution and 10 channels.

This patch monitors the DA9052 PMIC's ADC channels mostly for battery
parameters like battery temperature, junction temperature, battery
current etc.

This patch is functionally tested on Samsung SMDKV6410

Signed-off-by: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
[Guenter Roeck: __init --> __devinit for probe function]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2012-07-21 21:48:37 -07:00
Felten, Lothar f7c2fe386a hwmon: INA219 and INA226 support
Add support for the Texas Instruments INA219 and INA226 power monitors.

Signed-off-by: Lothar Felten <l-felten@ti.com>
[guenter.roeck@ericsson.com: formatting cleanup; check for smbus word data;
 select PGA=8 for INA219]
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-05-22 06:48:02 -07:00
Xie Xiaobo 5510e62a66 hwmon: Add MCP3021 ADC driver
Add I2C driver for MCP3021 that is an ADC chip from Microchip.
The MCP3021 is a successive approximation A/D converter (ADC)
with 10-bit resolution.
The driver export the value of Vin to sysfs, the voltage unit is
mV. Through the sysfs interface, lm-sensors tool can also display
Vin voltage.

Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2012-03-23 10:02:20 +01:00
Jonathan Cameron 4f3a659581 hwmon: AD7314 driver (ported from IIO)
Driver for AD7314, ADT7301, and ADT7302, ported from IIO.

Currently dropped power down mode support.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
[guenter.roeck@ericsson.com: Added MODULE_DEVICE_TABLE]
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-10-24 11:09:41 -07:00
Donggeun Kim 9d97e5c81e hwmon: Add driver for EXYNOS4 TMU
This patch allows to read temperature
from TMU(Thermal Management Unit) of SAMSUNG EXYNOS4 series of SoC.

Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-10-24 11:09:35 -07:00
Linus Torvalds 464c9098bb Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: (24 commits)
  hwmon: (lm90) Refactor reading of config2 register
  hwmon: (lm90) Make SA56004 detection more robust
  hwmon: (lm90) Simplify handling of extended local temp register
  hwmon: (pmbus) Add client driver for LM25066, LM5064, and LM5066
  hwmon: (max34440) Add support for peak attributes
  hwmon: (max8688) Add support for peak attributes
  hwmon: (max16064) Add support for peak attributes
  hwmon: (adm1275) Add support for peak attributes
  hwmon: (pmbus) Add support for peak attributes
  hwmon: Add new attributes to sysfs ABI
  hwmon: (pmbus) Strengthen check for status register existence
  hwmon: (pmbus) Add support for virtual pages
  hwmon: (pmbus) Support reading and writing of word registers in device specific code
  hwmon: (pmbus) Increase attribute name size
  hwmon: (pmbus) Add ADP4000, NCP4200 and NCP4208 to list of supported devices
  hwmon: (pmbus) Add support for VID output voltage mode
  hwmon: (pmbus) Move PMBus drivers to drivers/hwmon/pmbus
  hwmon: (coretemp) Add core/pkg threshold support to Coretemp
  hwmon: (lm95241) Add support for LM95231
  hwmon: LM95245 driver
  ...
2011-07-30 08:57:57 -10:00
Guenter Roeck 9d2ecfb768 hwmon: (pmbus) Move PMBus drivers to drivers/hwmon/pmbus
Since the number of PMBus drivers is getting large, move them into
directory drivers/hwmon/pmbus to improve readability and scalability.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2011-07-28 11:47:53 -07:00
Alexander Stein fffd80ccc1 hwmon: LM95245 driver
A hwmon driver for the National Semiconductor LM95245 dual temperature
sensors chip.

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-07-28 00:17:35 -07:00
Donggeun Kim f22aaaa70d hwmon: Driver for NTC Thermistors
Add support for NTC Thermistor series. In this release, the
following thermistors are supported: NCP15WB473, NCP18WB473, NCP03WB473,
and NCP15WL333. This driver is based on the datasheet of MURATA.

The driver in the patch does conversion from the raw ADC value
(either voltage or resistence) to temperature. In order to use
voltage values as input, the circuit schematics should be provided
with the platform data. A compensation table for each type of thermistor
is provided for the conversion.

Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: KyungMin Park <kyungmin.park@samsung.com>
Reviewed-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-07-28 00:17:33 -07:00
David George 731b4cace1 hwmon: Driver for MAX1668
This patch adds support for MAX1668 and compatible temperature sensors.

Signed-off-by: David George <david.george@ska.ac.za>
[guenter.roeck@ericsson.com: minor cleanup of probe error path]
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-07-28 00:17:32 -07:00
Hans de Goede 0772a64079 hwmon: New driver sch5636
This patch adds a new driver for SMSC SCH5636 Super I/O chips.
The chips include an embedded microcontroller for hardware monitoring
solutions, allowing motherboard manufacturers to create their own
custom hwmon solution based upon the SCH5636.

Currently the sch5636 driver only supports the Fujitsu Theseus SCH5636
based hwmon solution. The sch5636 driver runs a sanity check on
loading to ensure it is dealing with a Fujitsu Theseus and not with
another custom SCH5636 based hwmon solution.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-07-25 21:46:09 +02:00
Hans de Goede 28ff2f7a74 hwmon: (sch5627) Factor out some code shared with sch5636 driver
This patch adds a new sch56xx-common.ko which contains code which will also
be used in the new sch5636 driver.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-07-25 21:46:09 +02:00
Jean Delvare b0b349a85d hwmon: New driver for the SMSC EMC6W201
This is a new driver for the SMSC EMC6W201 hardware monitoring device.
The device is functionally close to the EMC6D100 series, but is
register-incompatible.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Harry G McGavran Jr <w5pny@arrl.net>
Tested-by: Jeff Rickman <jrickman@myamigos.us>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-25 20:43:33 +02:00
Jean Delvare 7d03336538 Move ACPI power meter driver to hwmon
As discussed earlier, the ACPI power meter driver would better live
in drivers/hwmon, as its only purpose is to create hwmon-style
interfaces for ACPI 4.0 power meter devices. Users are more likely to
look for it there, and less likely to accidentally hide it by
unselecting its dependencies.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: "Darrick J. Wong" <djwong@us.ibm.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Len Brown <lenb@kernel.org>
2011-05-25 20:43:32 +02:00
Andreas Herrmann 512d1027a6 hwmon: Add driver for AMD family 15h processor power information
This CPU family provides NB register values to gather following
TDP information

* ProcessorPwrWatts: Specifies in Watts the maximum amount of power
  the processor can support.
* CurrPwrWatts: Specifies in Watts the current amount of power being
  consumed by the processor.

This driver provides

* power1_crit (ProcessorPwrWatts)
* power1_input (CurrPwrWatts)

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-05-25 20:43:31 +02:00
Guenter Roeck 5e99c2f1e0 hwmon: Remove pkgtemp driver
After the merge of pkgtemp functionality into the coretemp driver,
the pkgtemp driver is no longer necessary. Remove it.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
2011-05-21 07:22:10 -07:00
Guenter Roeck 83f7649c52 hwmon: (pmbus) Add support for Analog Devices ADM1275
Add support for Analog Devices ADM1275 Hot-Swap Controller and Digital Power
Monitor

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-05-19 08:19:41 -07:00
Guenter Roeck 0c0a061516 hwmon: (pmbus) Support for TI UCD90xxx series Sequencer and System Health Controllers
Hardware monitoring support for TI UCD90120, UCD90124, UCD9090, and UCD90910
Sequencer and System Health Controllers.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-05-19 08:19:40 -07:00
Guenter Roeck 84fc4585c1 hwmon: (pmbus) Add support for TI UCD9200 series of PWM System Controllers
This patch adds hardware monitoring support for TI UCD9220, UCD9222, UCD9224,
UCD9240, UCD9244, UCD9246, and UCD9248 Digital PWM System Controllers.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-05-19 08:19:39 -07:00
Guenter Roeck f5bae2642e hwmon: Driver for MAX16065 System Manager and compatibles
This patch adds hardware monitoring support for Maxim MAX16065, MAX16066,
MAX16067, MAX16068, MAX16070, and MAX16071 flash-configurable system managers
with nonvolatile fault registers.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
2011-05-19 08:19:36 -07:00
Per Dalén 83bffbce74 hwmon: Add support for MAX6642
MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor with
Overtemperature Alarm from Maxim.

Signed-off-by: Per Dalen <per.dalen@appeartv.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-05-19 08:19:32 -07:00
Keerthy 0070bddfe7 hwmon: twl4030: Hwmon Driver for TWL4030 MADC
This driver exposes the sysfs nodes of the TWL4030 MADC module.
All the voltage channel values are expressed in terms of mV. Channel 13
and channel 14 are reserved. There are channels which represent
temperature and current the output is represented by celcius
and mA respectively.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23 10:42:00 +01:00
Dirk Eibach 8c22a8f575 hwmon: Add support for Texas Instruments ADS1015
Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-03-21 17:59:36 +01:00
Hans de Goede a98d506c08 hwmon: New driver for SMSC SCH5627
SMSC SCH5627 Super I/O chips include complete hardware monitoring
capabilities. They can monitor up to 5 voltages, 4 fans and 8
temperatures.

The hardware monitoring part of the SMSC SCH5627 is accessed by talking
through an embedded microcontroller. An application note describing the
protocol for communicating with the microcontroller is available upon
request. Please mail me if you want a copy.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-03-21 17:59:36 +01:00
Jean Delvare ff606677f6 Move lis3lv02d drivers to drivers/misc
The lis3lv02d drivers aren't hardware monitoring drivers, so the don't
belong to drivers/hwmon. Move them to drivers/misc, short of a better
home.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Eric Piel <eric.piel@tremplin-utc.net>
Tested-by: Takashi Iwai <tiwai@suse.de>
2011-03-21 17:59:36 +01:00
Jean Delvare efcfed9bad Move hp_accel to drivers/platform/x86
The hp_accel driver isn't a hardware monitoring driver, so it doesn't
belong to drivers/hwmon. Move it to drivers/platform/x86, assuming HP
doesn't ship non-x86 laptops.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Eric Piel <eric.piel@tremplin-utc.net>
Tested-by: Takashi Iwai <tiwai@suse.de>
2011-03-21 17:59:36 +01:00
Jean Delvare 39c3e721d6 Let Kconfig handle lis3lv02d dependencies
The dependencies between the various lis3lv02d drivers make it
impossible to split them to different directories, while we really
want to do this. Move handling of dependencies from Makefile to
Kconfig, to make the move possible at all.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Tested-by: Eric Piel <eric.piel@tremplin-utc.net>
Tested-by: Takashi Iwai <tiwai@suse.de>
2011-03-21 17:59:35 +01:00
Linus Torvalds a44f99c7ef Merge branch 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (25 commits)
  video: change to new flag variable
  scsi: change to new flag variable
  rtc: change to new flag variable
  rapidio: change to new flag variable
  pps: change to new flag variable
  net: change to new flag variable
  misc: change to new flag variable
  message: change to new flag variable
  memstick: change to new flag variable
  isdn: change to new flag variable
  ieee802154: change to new flag variable
  ide: change to new flag variable
  hwmon: change to new flag variable
  dma: change to new flag variable
  char: change to new flag variable
  fs: change to new flag variable
  xtensa: change to new flag variable
  um: change to new flag variables
  s390: change to new flag variable
  mips: change to new flag variable
  ...

Fix up trivial conflict in drivers/hwmon/Makefile
2011-03-20 18:14:55 -07:00
matt mooney 5c39e31195 hwmon: change to new flag variable
Replace EXTRA_CFLAGS with ccflags-y.

Signed-off-by: matt mooney <mfm@muteddisk.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-03-17 14:05:33 +01:00
per.dalen@appeartv.com de7790155f hwmon: Add support for LTC4151
LTC4151 is High Voltage I2C Current and Voltage Monitor from Linear
Technology.

Signed-off-by: Per Dalen <per.dalen@appeartv.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-03-14 22:39:11 -07:00