Use MFD_CELL_OF macro helper instead of plain struct properties, which makes
the code a bit shorter and to have commonly defined MFD cell attributes.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Acked-by: Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230309092254.56279-1-cniedermaier@dh-electronics.com
The TI Nspire devices contain a set of registers with a seemingly
miscellaneous set of functionality. This area is known simply as the
"misc" region.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230308165557.2242-2-afd@ti.com
With commit dd77f5fa97d3 ("mfd: Remove toshiba tmio drivers") the last
mfd driver that implements these callbacks is gone and since commit
652719b100 ("w1: remove ds1wm driver") the last user is gone. The
corresponding functions mfd_cell_enable() and mfd_cell_disable() are
also unused (since commit 0ca222c819 ("leds: Remove asic3 driver")).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230308091257.2404932-1-u.kleine-koenig@pengutronix.de
Implement a regulator driver with IRQ support for fault management.
Written against documentation [1] and [2] and tested on real hardware.
Every channel has it's own regulator supply nammed 'vss1-supply' and
'vss2-supply'. The regulator supply is used to determine the output
voltage, as the smart switch provides no output regulation.
The driver requires the 'shunt-resistor-micro-ohms' to be present in
the devicetree to properly calculate current related values.
You must specify compatible devictree layout:
regulator@3a {
reg = <0x3a>;
vss1-supply = <&p3v3>;
compatible = "maxim,max5978";
...
regulators {
sw0_ref: SW0 {
regulator-compatible = "SW0";
shunt-resistor-micro-ohms = <12000>;
...
}
}
}
1: https://datasheets.maximintegrated.com/en/ds/MAX5970.pdf
2: https://datasheets.maximintegrated.com/en/ds/MAX5978.pdf
...
Changes in V12:
- Use simple_mfd_i2c driver and remove previous implementation.
- Remove newline
- Use _MFD_MAX597X_H in header file
- Successfull build need following patch from regulator:
https://lore.kernel.org/r/20230216075302.68935-1-Naresh.Solanki@9elements.comhttps://lore.kernel.org/r/20230210163225.1208035-1-Naresh.Solanki@9elements.com
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230307121246.127425-2-Naresh.Solanki@9elements.com
The MAX597x is a hot swap controller with configurable fault protection.
It also has 10bit ADC for current & voltage measurements.
...
Changes in V12:
- Update title
Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
Co-developed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Co-developed-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230307121246.127425-1-Naresh.Solanki@9elements.com
This patch implements the GPIO function of Intel USB-I2C/GPIO/SPI adapter
device named "La Jolla Cove Adapter" (LJCA). It communicate with LJCA
GPIO module with specific protocol through interfaces exported by LJCA USB
driver.
Signed-off-by: Ye Xiang <xiang.ye@intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230225140118.2037220-3-xiang.ye@intel.com
It seems that this driver was developed based on preliminary documentation.
Report the correct names for all TQMxE39x variants, as they are used by
the released hardware revisions:
- Fix names for TQMxE39C1/C2 board IDs
- Distinguish TQMxE39M and TQMxE39S, which use the same board ID
The TQMxE39M/S are distinguished using the SAUC (Sanctioned Alternate
Uses Configuration) register of the GPIO controller. This also prepares
for the correct handling of the differences between the GPIO controllers
of our COMe and SMARC modules.
Fixes: 2f17dd34ff ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/aca9a7cb42a85181bcb456c437554d2728e708ec.1676892223.git.matthias.schiffer@ew.tq-group.com
Registers 0x160..0x17f are unassigned. Use 0x180 as base register and
update offets accordingly.
Also change the size of the range to include 0x19f. While 0x19f is
currently reserved for future extensions, so are several of the previous
registers up to 0x19e, and it is weird to leave out just the last one.
Fixes: 2f17dd34ff ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/db4677ac318b1283c8956f637f409995a30a31c3.1676892223.git.matthias.schiffer@ew.tq-group.com
The I2C_DETECT register is at IO port 0x1a7, which is outside the range
passed to devm_ioport_map() for io_base, and was only working because
there aren't actually any bounds checks for IO port accesses.
Extending the range does not seem like a good solution here, as it would
then conflict with the IO resource assigned to the I2C controller. As
this is just a one-off access during probe, use a simple inb() instead.
While we're at it, drop the unused define TQMX86_REG_I2C_INT_EN.
Fixes: 2f17dd34ff ("mfd: tqmx86: IO controller with I2C, Wachdog and GPIO")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/e8300a30f0791afb67d79db8089fb6004855f378.1676892223.git.matthias.schiffer@ew.tq-group.com
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230224150811.80316-5-nick.alcock@oracle.com
Since commit 8b41fc4454 ("kbuild: create modules.builtin without
Makefile.modbuiltin or tristate.conf"), MODULE_LICENSE declarations
are used to identify modules. As a consequence, uses of the macro
in non-modules will cause modprobe to misidentify their containing
object file as a module when it is not (false positives), and modprobe
might succeed rather than failing with a suitable error message.
So remove it in the files in this commit, none of which can be built as
modules.
Suggested-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230224150811.80316-22-nick.alcock@oracle.com
Remove pm8008_init(), which according to the comments exists only
as a workaround for regmap-irq's odd treatment of type registers.
This workaround shouldn't be needed anymore because this driver
uses config registers, which are always programmed by regmap-irq
no matter what the initial register state is.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230216222214.138671-5-aidanmacdonald.0x0@gmail.com
Replace type and virtual registers, which are both deprecated,
with config registers. This also simplifies the driver because
IRQ types are set in one place, the set_type_config() callback.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
[Lee: Squashed in fix-up patch from Stephen Rothwell adapting to new .set_type_config() API]
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230216222214.138671-3-aidanmacdonald.0x0@gmail.com
The usual behavior of mask registers is writing a '1' bit to
disable (mask) an interrupt; similarly, writing a '1' bit to
an unmask register enables (unmasks) an interrupt.
Due to a longstanding issue in regmap-irq, mask and unmask
registers were inverted when both kinds of registers were
present on the same chip, ie. regmap-irq actually wrote '1's
to the mask register to enable an IRQ and '1's to the unmask
register to disable an IRQ.
This was fixed by commit e8ffb12e7f ("regmap-irq: Fix
inverted handling of unmask registers") but the fix is opt-in
via mask_unmask_non_inverted = true because it requires manual
changes for each affected driver. The new behavior will become
the default once all drivers have been updated.
The PM8008 appears to rely on the inverted behavior. It has
separate set & clear registers for a register called INT_EN,
which presumably enables interrupts by writing '1's. Opt in
to the new non-inverted behavior & swap mask_base/unmask_base.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230216222214.138671-2-aidanmacdonald.0x0@gmail.com
Group some variables based on their sizes to reduce hole and avoid padding.
On x86_64, this shrinks the size from 144 to 128 bytes.
As an example:
$ size drivers/mfd/as3722.o (Before)
text data bss dec hex filename
9441 680 16 10137 2799 drivers/mfd/as3722.o
$ size drivers/mfd/as3722.o (After)
text data bss dec hex filename
9345 680 16 10041 2739 drivers/mfd/as3722.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/bb631974888dfe1af593b6280cf30fb913d2d1a4.1676365116.git.christophe.jaillet@wanadoo.fr
This was omitted when adding the RRADC bindings.
Fixes: 7ea58c951a ("dt-bindings: iio: adc: document qcom-spmi-rradc")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230213201337.2089970-1-konrad.dybcio@linaro.org
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/202302081734511884545@zte.com.cn
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/202302081731593374472@zte.com.cn
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/202302081736500534579@zte.com.cn
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/202302081735440864562@zte.com.cn
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/202302081733542304522@zte.com.cn
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/202302081733017704501@zte.com.cn
The Android Lenovo Yoga Book X90F / X90L uses the same charger / fuelgauge
setup as the already supported Windows Lenovo Yoga Book X91F/L, add
a DMI match for this to intel_cht_wc_models with driver_data
set to INTEL_CHT_WC_LENOVO_YOGABOOK1.
When the quirk for the X91F/L was initially added it was written to
also apply to the X90F/L but this does not work because the Android
version of the Yoga Book uses completely different DMI strings.
Also adjust the X91F/L quirk to reflect that it only applies to
the X91F/L models.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230301095402.28582-1-hdegoede@redhat.com
The S5M8763 MFD has no device tree compatible, and since board file
support for it was removed, there's no way to use this MFD. After
removing the remaining code for it from the MFD driver, also remove
support for it in the s5m RTC driver, and all remaining references to
it.
Signed-off-by: David Virag <virag.david003@gmail.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230131183008.4451-3-virag.david003@gmail.com
The S5M8751 and S5M8763 PMIC chips have no corresponding compatible
values, so since board file support was removed for this driver, there
is no way to specify these PMICs as present in boards anymore.
Remove leftovers of these chips since it's dead code.
Signed-off-by: David Virag <virag.david003@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230131183008.4451-2-virag.david003@gmail.com
- Fix setting affinity of hwlat threads in containers
Using sched_set_affinity() has unwanted side effects when being
called within a container. Use set_cpus_allowed_ptr() instead.
- Fix per cpu thread management of the hwlat tracer
* Do not start per_cpu threads if one is already running for the CPU.
* When starting per_cpu threads, do not clear the kthread variable
as it may already be set to running per cpu threads
- Fix return value for test_gen_kprobe_cmd()
On error the return value was overwritten by being set to
the result of the call from kprobe_event_delete(), which would
likely succeed, and thus have the function return success.
- Fix splice() reads from the trace file that was broken by
36e2c7421f ("fs: don't allow splice read/write without explicit ops")
- Remove obsolete and confusing comment in ring_buffer.c
The original design of the ring buffer used struct page flags
for tricks to optimize, which was shortly removed due to them
being tricks. But a comment for those tricks remained.
- Set local functions and variables to static
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZBdIkBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qti2AP49s1GM8teFgDF/CO3oa45BoYq1lMJO
1Z+x+mS/bdUAZgEAw+3KGo8oZDuvWu/nr04JPeoy0GL1/JnbQ6JNCCjzhQc=
=Yk66
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix setting affinity of hwlat threads in containers
Using sched_set_affinity() has unwanted side effects when being
called within a container. Use set_cpus_allowed_ptr() instead
- Fix per cpu thread management of the hwlat tracer:
- Do not start per_cpu threads if one is already running for the CPU
- When starting per_cpu threads, do not clear the kthread variable
as it may already be set to running per cpu threads
- Fix return value for test_gen_kprobe_cmd()
On error the return value was overwritten by being set to the result
of the call from kprobe_event_delete(), which would likely succeed,
and thus have the function return success
- Fix splice() reads from the trace file that was broken by commit
36e2c7421f ("fs: don't allow splice read/write without explicit
ops")
- Remove obsolete and confusing comment in ring_buffer.c
The original design of the ring buffer used struct page flags for
tricks to optimize, which was shortly removed due to them being
tricks. But a comment for those tricks remained
- Set local functions and variables to static
* tag 'trace-v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/hwlat: Replace sched_setaffinity with set_cpus_allowed_ptr
ring-buffer: remove obsolete comment for free_buffer_page()
tracing: Make splice_read available again
ftrace: Set direct_ops storage-class-specifier to static
trace/hwlat: Do not start per-cpu thread if it is already running
trace/hwlat: Do not wipe the contents of per-cpu thread data
tracing/osnoise: set several trace_osnoise.c variables storage-class-specifier to static
tracing: Fix wrong return in kprobe_event_gen_test.c
There is a problem with the behavior of hwlat in a container,
resulting in incorrect output. A warning message is generated:
"cpumask changed while in round-robin mode, switching to mode none",
and the tracing_cpumask is ignored. This issue arises because
the kernel thread, hwlatd, is not a part of the container, and
the function sched_setaffinity is unable to locate it using its PID.
Additionally, the task_struct of hwlatd is already known.
Ultimately, the function set_cpus_allowed_ptr achieves
the same outcome as sched_setaffinity, but employs task_struct
instead of PID.
Test case:
# cd /sys/kernel/tracing
# echo 0 > tracing_on
# echo round-robin > hwlat_detector/mode
# echo hwlat > current_tracer
# unshare --fork --pid bash -c 'echo 1 > tracing_on'
# dmesg -c
Actual behavior:
[573502.809060] hwlat_detector: cpumask changed while in round-robin mode, switching to mode none
Link: https://lore.kernel.org/linux-trace-kernel/20230316144535.1004952-1-costa.shul@redhat.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 0330f7aa8e ("tracing: Have hwlat trace migrate across tracing_cpumask CPUs")
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The comment refers to mm/slob.c which is being removed. It comes from
commit ed56829cb3 ("ring_buffer: reset buffer page when freeing") and
according to Steven the borrowed code was a page mapcount and mapping
reset, which was later removed by commit e4c2ce82ca ("ring_buffer:
allocate buffer page pointer"). Thus the comment is not accurate anyway,
remove it.
Link: https://lore.kernel.org/linux-trace-kernel/20230315142446.27040-1-vbabka@suse.cz
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Reported-by: Mike Rapoport <mike.rapoport@gmail.com>
Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Fixes: e4c2ce82ca ("ring_buffer: allocate buffer page pointer")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Since the commit 36e2c7421f ("fs: don't allow splice read/write
without explicit ops") is applied to the kernel, splice() and
sendfile() calls on the trace file (/sys/kernel/debug/tracing
/trace) return EINVAL.
This patch restores these system calls by initializing splice_read
in file_operations of the trace file. This patch only enables such
functionalities for the read case.
Link: https://lore.kernel.org/linux-trace-kernel/20230314013707.28814-1-sfoon.kim@samsung.com
Cc: stable@vger.kernel.org
Fixes: 36e2c7421f ("fs: don't allow splice read/write without explicit ops")
Signed-off-by: Sung-hun Kim <sfoon.kim@samsung.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Here are some small tty and serial driver fixes for 6.3-rc3 to resolve
some reported issues.
They include:
- 8250 driver Kconfig issue pointed out by you that showed up in -rc1
- qcom-geni serial driver fixes
- various 8250 driver fixes for reported problems
- fsl_lpuart driver fixes
- serdev fix for regression in -rc1
- vt.c bugfix
All have been in linux-next for over a week with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZBcinQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynIYACgjP49Xy1N6hDLZJgKxvnPLmvnhY4AoKM8CkHI
zbWudA1fBqsYLFtxNKaQ
=/Ond
-----END PGP SIGNATURE-----
Merge tag 'tty-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.3-rc3 to resolve
some reported issues.
They include:
- 8250 driver Kconfig issue pointed out by you that showed up in -rc1
- qcom-geni serial driver fixes
- various 8250 driver fixes for reported problems
- fsl_lpuart driver fixes
- serdev fix for regression in -rc1
- vt.c bugfix
All have been in linux-next for over a week with no reported problems"
* tag 'tty-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: vt: protect KD_FONT_OP_GET_TALL from unbound access
serial: qcom-geni: drop bogus uart_write_wakeup()
serial: qcom-geni: fix mapping of empty DMA buffer
serial: qcom-geni: fix DMA mapping leak on shutdown
serial: qcom-geni: fix console shutdown hang
serdev: Set fwnode for serdev devices
tty: serial: fsl_lpuart: fix race on RX DMA shutdown
serial: 8250_pci1xxxx: Disable SERIAL_8250_PCI1XXXX config by default
serial: 8250_fsl: fix handle_irq locking
serial: 8250_em: Fix UART port type
serial: 8250: ASPEED_VUART: select REGMAP instead of depending on it
tty: serial: fsl_lpuart: skip waiting for transmission complete when UARTCTRL_SBK is asserted
Revert "tty: serial: fsl_lpuart: adjust SERIAL_FSL_LPUART_CONSOLE config dependency"
Here are a few small char/misc/other driver subsystem patches to resolve
reported problems for 6.3-rc3.
Included in here are:
- Interconnect driver fixes for reported problems
- Memory driver fixes for reported problems.
- nvmem core fix
- firmware driver fix for reported problem.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZBchKw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylYVQCfbQtOMjbfxCNvmBCZbC8GWaanLloAn243V7vJ
oxfPCUa6+BYLFWweKydG
=tuC/
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a few small char/misc/other driver subsystem patches to
resolve reported problems for 6.3-rc3.
Included in here are:
- Interconnect driver fixes for reported problems
- Memory driver fixes for reported problems
- nvmem core fix
- firmware driver fix for reported problem
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (23 commits)
memory: tegra30-emc: fix interconnect registration race
memory: tegra20-emc: fix interconnect registration race
memory: tegra124-emc: fix interconnect registration race
memory: tegra: fix interconnect registration race
interconnect: exynos: drop redundant link destroy
interconnect: exynos: fix registration race
interconnect: exynos: fix node leak in probe PM QoS error path
interconnect: qcom: msm8974: fix registration race
interconnect: qcom: rpmh: fix registration race
interconnect: qcom: rpmh: fix probe child-node error handling
interconnect: qcom: rpm: fix registration race
nvmem: core: return -ENOENT if nvmem cell is not found
firmware: xilinx: don't make a sleepable memory allocation from an atomic context
interconnect: qcom: rpm: fix probe child-node error handling
interconnect: qcom: osm-l3: fix registration race
interconnect: imx: fix registration race
interconnect: fix provider registration API
interconnect: fix icc_provider_del() error handling
interconnect: fix mem leak when freeing nodes
interconnect: qcom: qcm2290: Fix MASTER_SNOC_BIMC_NRT
...
changes over sysfs have been done instead of waiting until something
else triggers the workqueue later - another error or the polling
interval cycle is reached
-----BEGIN PGP SIGNATURE-----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=Q6Dq
-----END PGP SIGNATURE-----
Merge tag 'ras_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS fix from Borislav Petkov:
- Flush out logged errors immediately after MCA banks configuration
changes over sysfs have been done instead of waiting until something
else triggers the workqueue later - another error or the polling
interval cycle is reached
* tag 'ras_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Make sure logged MCEs are processed after sysfs update
to groups
- Update the proper event time tracking variable depending on the
event type
- Fix a memory overwrite issue due to using the wrong function argument
when outputting perf events
-----BEGIN PGP SIGNATURE-----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=l7PF
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Check whether sibling events have been deactivated before adding them
to groups
- Update the proper event time tracking variable depending on the event
type
- Fix a memory overwrite issue due to using the wrong function argument
when outputting perf events
* tag 'perf_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix check before add_event_to_groups() in perf_group_detach()
perf: fix perf_event_context->time
perf/core: Fix perf_output_begin parameter is incorrectly invoked in perf_event_bpf_output
- Clear temporary storage in the resctrl code to prevent access to an
unexistent MSR
- Add a simple throttling mechanism to protect the hypervisor from potentially
malicious SEV guests issuing requests in rapid succession.
In order to not jeopardize the sanity of everyone involved in
maintaining this code, the request issuing side has received
a cleanup, split in more or less trivial, small and digestible pieces.
Otherwise, the code was threatening to become an unmaintainable mess.
Therefore, that cleanup is marked indirectly also for stable so that
there's no differences between the upstream code and the stable
variant when it comes down to backporting more there.
-----BEGIN PGP SIGNATURE-----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=6UGz
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"There's a little bit more 'movement' in there for my taste but it
needs to happen and should make the code better after it.
- Check cmdline_find_option()'s return value before further
processing
- Clear temporary storage in the resctrl code to prevent access to an
unexistent MSR
- Add a simple throttling mechanism to protect the hypervisor from
potentially malicious SEV guests issuing requests in rapid
succession.
In order to not jeopardize the sanity of everyone involved in
maintaining this code, the request issuing side has received a
cleanup, split in more or less trivial, small and digestible
pieces. Otherwise, the code was threatening to become an
unmaintainable mess.
Therefore, that cleanup is marked indirectly also for stable so
that there's no differences between the upstream code and the
stable variant when it comes down to backporting more there"
* tag 'x86_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Fix use of uninitialized buffer in sme_enable()
x86/resctrl: Clear staged_config[] before and after it is used
virt/coco/sev-guest: Add throttling awareness
virt/coco/sev-guest: Convert the sw_exit_info_2 checking to a switch-case
virt/coco/sev-guest: Do some code style cleanups
virt/coco/sev-guest: Carve out the request issuing logic into a helper
virt/coco/sev-guest: Remove the disable_vmpck label in handle_guest_request()
virt/coco/sev-guest: Simplify extended guest request handling
virt/coco/sev-guest: Check SEV_SNP attribute at probe time
syzkaller.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmQWfYcACgkQ8vlZVpUN
gaNvhAgAqIv3PLgt3SJIC/klXmEsXJn2q1EqAUKk6XHAzppHoUMrnsJJ2Sz+u4NT
eKx7FGz+dIzJK8lLoX+XNnLgdkkJwklD8jIxAjbnkgHaGJbjdLH3Su4elQvGwLla
CprPysjMtgny4rogLwz2D+At3w8o7/JACbzlh0QNhaZ5IIP4Kj5QutgyftF1m4Qa
AfC9KcpJ+poTQTI4m4oOrJCrH6kwJdVItuS5/mk54DTChNNYtJJy2M6eho7IQ9iG
ENBnt06/uWhdHQz4OYmYn3x1iXYOAdAmeVGtREKqOstUd31VO2TCC2lE+7tSnO2d
177m3jfTHdv5znU+LfyrS1Y1u1nGBA==
=AXq7
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fix from Ted Ts'o:
"Fix a double unlock bug on an error path in ext4, found by smatch and
syzkaller"
* tag 'ext4_for_linus_urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix possible double unlock when moving a directory
smatch reports this warning
kernel/trace/ftrace.c:2594:19: warning:
symbol 'direct_ops' was not declared. Should it be static?
The variable direct_ops is only used in ftrace.c, so it should be static
Link: https://lore.kernel.org/linux-trace-kernel/20230311135113.711824-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The hwlatd tracer will end up starting multiple per-cpu threads with
the following script:
#!/bin/sh
cd /sys/kernel/debug/tracing
echo 0 > tracing_on
echo hwlat > current_tracer
echo per-cpu > hwlat_detector/mode
echo 100000 > hwlat_detector/width
echo 200000 > hwlat_detector/window
echo 1 > tracing_on
To fix the issue, check if the hwlatd thread for the cpu is already
running, before starting a new one. Along with the previous patch, this
avoids running multiple instances of the same CPU thread on the system.
Link: https://lore.kernel.org/all/20230302113654.2984709-1-tero.kristo@linux.intel.com/
Link: https://lkml.kernel.org/r/20230310100451.3948583-3-tero.kristo@linux.intel.com
Cc: stable@vger.kernel.org
Fixes: f46b16520a ("trace/hwlat: Implement the per-cpu mode")
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
smatch reports several similar warnings
kernel/trace/trace_osnoise.c:220:1: warning:
symbol '__pcpu_scope_per_cpu_osnoise_var' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:243:1: warning:
symbol '__pcpu_scope_per_cpu_timerlat_var' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:335:14: warning:
symbol 'interface_lock' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:2242:5: warning:
symbol 'timerlat_min_period' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:2243:5: warning:
symbol 'timerlat_max_period' was not declared. Should it be static?
These variables are only used in trace_osnoise.c, so it should be static
Link: https://lore.kernel.org/linux-trace-kernel/20230309150414.4036764-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Overwriting the error code with the deletion result may cause the
function to return 0 despite encountering an error. Commit b111545d26
("tracing: Remove the useless value assignment in
test_create_synth_event()") solves a similar issue by
returning the original error code, so this patch does the same.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Link: https://lore.kernel.org/linux-trace-kernel/20230131075818.5322-1-aagusev@ispras.ru
Signed-off-by: Anton Gusev <aagusev@ispras.ru>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Christoph Niedermaier
Andrew Davis
Uwe Kleine-König
Krzysztof Kozlowski
Patrick Rudolph
Marcello Sylvester Bauer
Rohit Agarwal
Ye Xiang
Jakob Hauser
Mukesh Ojha
Matthias Schiffer
Emil Renner Berthing
Nick Alcock
Aidan MacDonald
Poovendhan Selvaraj
Christophe JAILLET
Konrad Dybcio
Ye Xingchen
Jackie Liu
Hans de Goede
David Virag
William Breathitt Gray
Linus Torvalds
Costa Shulyupin
Vlastimil Babka
Sung-hun Kim
Tom Rix
Tero Kristo
Anton Gusev