Sowmini Varadhan says:
====================
RDS: TCP: tunable socket buffer parameters
Patch 1 uses sysctl to create tunable socket buffer size parameters.
Patch 2 removes an unuused constant.
v2: use sysctl
v3: review comments from Santosh Shilimkar, Eric Dumazet
v4: review comments from Hannes Sowa
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
RDS_TCP_DEFAULT_BUFSIZE has been unused since commit 1edd6a14d2
("RDS-TCP: Do not bloat sndbuf/rcvbuf in rds_tcp_tune").
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add per-net sysctl tunables to set the size of sndbuf and
rcvbuf on the kernel tcp socket.
The tunables are added at /proc/sys/net/rds/tcp/rds_tcp_sndbuf
and /proc/sys/net/rds/tcp/rds_tcp_rcvbuf.
These values must be set before accept() or connect(),
and there may be an arbitrary number of existing rds-tcp
sockets when the tunable is modified. To make sure that all
connections in the netns pick up the same value for the tunable,
we reset existing rds-tcp connections in the netns, so that
they can reconnect with the new parameters.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert the dma transfers to be dmaengine based, now pxa has a dmaengine
slave driver. This makes this driver a bit more PXA agnostic.
The driver was only compile tested. The risk is quite small as no
current PXA platform I'm aware of is using smc911x driver.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhang Shengju says:
====================
remove duplicate set of flag IFF_MULTICAST
This patch series remove duplicate set of flag IFF_MULTICAST.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove unnecessary set of flag IFF_MULTICAST, since ether_setup
already does this.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove unnecessary set of flag IFF_MULTICAST, since ether_setup
already does this.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There were two issues here:
1) dma_mapping_error() return true/false but we want to return -ENOMEM
2) If dmaengine_prep_slave_sg() failed then "err" wasn't set but
presumably that should be -ENOMEM as well.
I changed the success path to "return 0;" instead of "return ret;" for
clarity.
Fixes: 94fe8c683c ('ks8842: Support DMA when accessed via timberdale')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
Minor BPF follow-ups
Some minor last follow-ups I still had in my queue. The first one adds
readability support for __sk_buff's tc_classid member, the remaining
two are some minor cleanups. For details please see individual patches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
eBPF defines this as BPF_TUNLEN_MAX and OVS just uses the hard-coded
value inside struct sw_flow_key. Thus, add and use IP_TUNNEL_OPTS_MAX
for this, which makes the code a bit more generic and allows to remove
BPF_TUNLEN_MAX from eBPF code.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can just add a small helper dst_tclassid() for retrieving the
dst->tclassid value. It makes the code a bit better in that we can
get rid of the ifdef from filter.c by moving this into the header.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the tc_classid from eBPF skb context is write-only, but there's
no good reason for tc programs to limit it to write-only. For example,
it can be used to transfer its state via tail calls where the resulting
tc_classid gets filled gradually.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
MVNETA_BM has a dependency on MVNETA, so we can only select the former
if the latter is enabled. However, the code dependency is the reverse:
The mvneta module can call into the mvneta_bm module, so mvneta cannot
be a built-in if mvneta_bm is a module, or we get a link error:
drivers/net/built-in.o: In function `mvneta_remove':
drivers/net/ethernet/marvell/mvneta.c:4211: undefined reference to `mvneta_bm_pool_destroy'
drivers/net/built-in.o: In function `mvneta_bm_update_mtu':
drivers/net/ethernet/marvell/mvneta.c:1034: undefined reference to `mvneta_bm_bufs_free'
This avoids the problem by further clarifying the dependency so that
MVNETA_BM is a silent Kconfig option that gets turned on by the
new MVNETA_BM_ENABLE option. This way both the core HWBM module and
the MVNETA_BM code are always built-in when needed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: dc35a10f68 ("net: mvneta: bm: add support for hardware buffer management")
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two issues with the current code. First one is that we need
to set res->class to 0 in case we use non-default classid matching.
This is important for the case where cls_bpf was initially set up with
an optional binding to a default class with tcf_bind_filter(), where
the underlying qdisc implements bind_tcf() that fills res->class and
tests for it later on when doing the classification. Convention for
these cases is that after tc_classify() was called, such qdiscs (atm,
drr, qfq, cbq, hfsc, htb) first test class, and if 0, then they lookup
based on classid.
Second, there's a bug with da mode, where res->classid is only assigned
a 16 bit minor, but it needs to expand to the full 32 bit major/minor
combination instead, therefore we need to expand with the bound major.
This is fine as classes belonging to a classful qdisc must share the
same major.
Fixes: 045efa82ff ("cls_bpf: introduce integrated actions")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Aaron Young says:
====================
ldmvsw: Add ldmvsw driver
This series adds a new Logical Domains vSwitch (ldmvsw) driver.
The ldmvsw driver code will live in the drivers/net/ethernet/sun/
directory and will operate on Oracle systems running SPARC Linux in a
Logical Domains environment (typically in the control domain).
The ldmvsw driver is very similar in function to the existing sunvnet
driver. Ldmvsw creates a network interface for each "vsw-port" node
found in the Machine Description (MD) of a service domain. These
nodes correspond to ports on a vswitch created by the logical domains
manager. The created network interface(s) can be used by bridge/vswitch
software (such as the Linux bridge or Open vSwitch) to provide
guest domain(s) with network interconnectivity or connectivity
to a physical network.
Here is a example diagram of ldmvsw driver usage in a logical
domain environment to provide a guest domain with network connectivity
to a physical NIC on the service domain:
+----------------+ +-----------------
| Service Domain | | Guest domain |
| | | |
| LinuxBridge | | |
| | | | | |
| NIC Ldmvsw | | Sunvnet |
+----------------+ +----------------+
| | LDC |
LAN ------------------------------
As stated, the sunvnet and ldmvsw drivers are _very_ similar in function.
They both create network interface(s) to receive/transmit network
traffic across LDC network channel(s). Since the driver is so similar
in function to sunvnet, the approach will be as follows to integrate
the driver and take advantage of common code:
Patch #1: Split sunvnet.c driver into sunvnet.c and sunvnet_common.c
Patch #2: Modify the sunvnet_common code and data structures to be compatible
with both the sunvnet and ldmvsw drivers.
Patch #3: Add the new ldmvsw.c driver code
Patch #4: Checkpatch cleanup of the sunvnet/sunvnet_common code.
NOTE - Patch#1 renames a file (sunvnet.h -> sunvnet_common.h). When generating
the patches (using git format-patch), I had to use the --no-renames option
otherwise patch#1 would NOT apply using 'patch -p1' - which as I
understand is a requirement for patch acceptance. I wasn't sure if this
is proper thing to do. Please advise if not. Thanks.
v2 changes:
* change all EXPORT_SYMBOL declarations to EXPORT_SYMBOL_GPL
* remove inline attribute for external function port_is_up_common()
* Give all exported/global funcs in sunvnet_common.c a 'sunvnet_' prefix
to avoid kernel global namespace pollution/collisions
* ldmvsw.c: Order local variable declarations from longest to shortest line
* ldmvsw.c: register the netdevice after all supporting state is ready/setup.
NOTE: The consensus at Oracle is that the following functions
must be done AFTER register_netdev() - this is the same
ordering currently used in the sunvnet driver:
1. sunvnet_port_add_txq_common() - needs registered netdev
2. napi_enable() - requires registered netdev
3. vio_port_up() - as soon as this function is called
LDC handshake messages will come in
which must be handled by the napi code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Checkpatch updates for sunvnet.c and sunvnet_common.c.
Signed-off-by: Aaron Young <aaron.young@oracle.com>
Signed-off-by: Rashmi Narasimhan <rashmi.narasimhan@oracle.com>
Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Reviewed-by: Alexandre Chartre <Alexandre.Chartre@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add ldmvsw.c driver
Details:
The ldmvsw driver very closely follows the sunvnet.c code and makes
use of the sunvnet_common.c code for core functionality.
A significant difference between sunvnet and ldmvsw driver is
sunvnet creates a network interface for each vnet-port *parent*
node in the MD while the ldmvsw driver creates a network interface
for every vsw-port node in the Machine Description (MD).
Therefore the netdev_priv() for sunvnet is a vnet structure while
the netdev_priv() for ldmvsw is a vnet_port structure.
Vnet_port structures allocated by ldmvsw have the vsw bit set.
When finding the net_device associated with a port, the common code keys
off this bit to use either the net_device found in the vnet_port or the
net_device in the vnet structure (see the VNET_PORT_TO_NET_DEVICE() macro in
sunvnet_common.h). This scheme allows the common code to work with
both drivers with minimal changes.
Similar to Xen, network interfaces created by the ldmvsw driver will always
have a HW Addr (i.e. mac address) of FE:FF:FF:FF:FF:FF and each will be
assigned the devname "vif<cfg_handle>.<port_id>" - where <cfg_handle> and
<port_id> are a unique handle/port pair assigned to the associated
vsw-port node in the MD.
Signed-off-by: Aaron Young <aaron.young@oracle.com>
Signed-off-by: Rashmi Narasimhan <rashmi.narasimhan@oracle.com>
Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Reviewed-by: Alexandre Chartre <Alexandre.Chartre@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Modify sunvnet common code and data structures to be compatible
with both sunvnet and ldmvsw drivers.
Details:
Sunvnet operates on "vnet-port" nodes which appear in the Machine
Description (MD) in a guest domain. Ldmvsw operates on "vsw-port"
nodes which appear in the MD of a service domain.
A difference between the sunvnet driver and the ldmvsw driver is
the sunvnet driver creates a network interface (i.e. a struct net_device)
for every vnet-port *parent* "network" node. Several vnet-ports may appear
under this common parent network node - each corresponding to a common parent
network interface. Conversely, since bridge/vswitch software will need
to interface with every vsw-port in a system, the ldmvsw driver creates
a network interface (i.e. a struct net_device) for every vsw-port - not
every parent node as with sunvnet. This difference required some special
handling in the common code as explained below.
There are 2 key data structures used by the sunvnet and ldmvsw drivers
(which are now found in sunvnet_common.h):
1. struct vnet_port
This structure represents a vnet-port node in sunvnet and a vsw-port
in the ldmvsw driver.
2. struct vnet
This structure represents a parent "network" node in sunvnet and a parent
"virtual-network-switch" node in ldmvsw.
Since the sunvnet driver allocates a net_device for every parent "network"
node, a net_device member appears in the struct vnet. Since the ldmvsw
driver allocates a net_device for every port, a net_device member was
added to the vnet_port. The common code distinguishes which structure
net_device member to use by checking a 'vsw' bit that was added to the
vnet_port structure. See the VNET_PORT_TO_NET_DEVICE() marco in
sunvnet_common.h.
The netdev_priv() in sunvnet is allocated as a vnet. The netdev_priv()
in ldmvsw is a vnet_port. Therefore, any place in the common code
where a netdev_priv() call was made, a wrapper function was implemented
in each driver to first get the vnet and/or vnet_port (in a driver
specific way) and pass them as newly added parameters to the common
functions (see wrapper funcs: vnet_set_rx_mode() and vnet_poll_controller()).
Since these wrapper functions call __tx_port_find(), __tx_port_find() was
moved from the common code back into sunvnet.c. Note - ldmvsw.c does not
require this function.
These changes also required that port_is_up() be made
into a common function and thus it was given a _common suffix and
exported like the other common functions.
A wrapper function was also added for vnet_start_xmit_common() to pass a
driver-specific function arg to return the port associated with a given
struct sk_buff and struct net_device. This was required because
vnet_start_xmit_common() grabs a lock prior to getting the associated
port. Using a function pointer arg allowed the code to work unchanged
without risking changes to the non-trivial locking logic in
vnet_start_xmit_common().
Signed-off-by: Aaron Young <aaron.young@oracle.com>
Signed-off-by: Rashmi Narasimhan <rashmi.narasimhan@oracle.com>
Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Reviewed-by: Alexandre Chartre <Alexandre.Chartre@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Split sunvnet.c into sunvnet.c and sunvnet_common.c.
Details:
Since the sunvnet and ldmvsw drivers will both use common sunvnet code,
move the functions (and support functions) anticipated to be common code
from sunvnet.c to sunvnet_common.c. Similarly, sunvnet.h was renamed to
sunvnet_common.h. The sunvnet_common.c code will be compiled into the
kernel and act as a library of functions that are linked by either
(or both) drivers when loaded.
Function names for external functions in sunvnet_common.c (to be
called by both the sunvnet and ldmvsw drivers) were tagged with a "_common"
suffix to clearly designate them as common functions.
No functional changes as of yet... just moved code verbatim to the new
sunvnet_common.c/h files.
Makefile/Kconfig support added to build sunvnet_common.c file. The code
is included in the kernel if SUN_LDOMS is defined/selected.
NOTE - per the SubmittingPatches documentation, since the code was just
moved from one file another, the code was NOT checkpatch'd in this commit
to aid in review.
Signed-off-by: Aaron Young <aaron.young@oracle.com>
Signed-off-by: Rashmi Narasimhan <rashmi.narasimhan@oracle.com>
Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Reviewed-by: Alexandre Chartre <Alexandre.Chartre@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Not all adapters have FC-NPIV configured. If bnx2fc is used with such an
adapter, driver would read irrelevant data from the the nvram and log
"FC-NPIV table with bad length..." In system logs.
Simply accept that reading '0' as the feature offset in nvram indicates
the feature isn't there and return.
Reported-by: Andrew Patterson <andrew.patterson@hpe.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The result value is overwritten by a return value of
ravb_ptp_interrupt().
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When running small packets [length < 256 bytes] traffic, packets were
being dropped due to invalid data in those packets which were
delivered by the driver upto the stack. Using pci_dma_sync_single_for_cpu
ensures copying latest and updated data into skb from the receive buffer.
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a dt mdio entry has been added least assume that we wont
search for phys attached. The DT and of_mdiobus_register already do
this. This stops DSA phys being found and phys created for them, as
this is handled by the DSA driver.
Signed-off-by: Phil Reid <preid@electromag.com.au>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There was a missing unlock on the error path.
Fixes: 656e705243 ('net-next: mediatek: add support for MT7623 ethernet')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: John Crispin <blogic@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
of_phy_connect() returns NULL on error, it never returns error pointers.
Fixes: 656e705243 ('net-next: mediatek: add support for MT7623 ethernet')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: John Crispin <blogic@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently output of MPLS packets on tunnel vports is not allowed by Open
vSwitch. This is because historically encapsulation was done in such a way
that the inner_protocol field of the skb needed to hold the inner protocol
for both MPLS and tunnel encapsulation in order for GSO segmentation to be
performed correctly.
Since b2acd1dc39 ("openvswitch: Use regular GRE net_device instead of
vport") Open vSwitch makes use of lwt to output to tunnel netdevs which
perform encapsulation. As no drivers expose support for MPLS offloads this
means that GSO packets are segmented in software by validate_xmit_skb(),
which is called from __dev_queue_xmit(), before tunnel encapsulation occurs.
This means that the inner protocol of MPLS is no longer needed by the time
encapsulation occurs and the contention on the inner_protocol field of the
skb no longer occurs.
Thus it is now safe to output MPLS to tunnel vports.
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jesse Gross <jesse@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
No code changes. Since OCTEON is a Cavium product, move the driver to
the vendor directory to unclutter things a bit.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Added support for Gemalto's Cinterion PHxx WWAN interfaces
by adding QMI_FIXED_INTF with Cinterion's VID and PID.
PHxx can have:
2 RmNet Interfaces (PID 0x0082) or
1 RmNet + 1 USB Audio interface (PID 0x0083).
Signed-off-by: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now SYN_RECV request sockets are installed in ehash table, an ICMP
handler can find a request socket while another cpu handles an incoming
packet transforming this SYN_RECV request socket into an ESTABLISHED
socket.
We need to remove the now obsolete WARN_ON(req->sk), since req->sk
is set when a new child is created and added into listener accept queue.
If this race happens, the ICMP will do nothing special.
Fixes: 079096f103 ("tcp/dccp: install syn_recv requests into ehash table")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Ben Lazarus <blazarus@google.com>
Reported-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
vlan drivers lack proper propagation of gso_max_segs from
lower device.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Daney says:
====================
net/phy: Fixes for Cavium Thunder MDIO code.
Previous patch set:
commit 5fc7cf1794 ("net: thunderx: Cleanup PHY probing code.")
commit 1eefee901f ("phy: mdio-octeon: Refactor into two files/modules")
commit 379d7ac7ca ("phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses.")
Had several problems. We try to fix them here.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
It is possible, although unlikely, that probing will find the
phy_device for the first LMAC of a thunder BGX device, but then need
to fail with -EPROBE_DEFER on a subsequent LMAC. In this case, we
need to call put_device() on each of the phy_devices that were
obtained, but will be unused due to returning -EPROBE_DEFER.
Also, since we can break out of the probing loop early, we need to
explicitly call of_node_put() outside of the loop.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously we selected MDIO_OCTEON, which after creating the Thunder
specific MDIO bus driver is much less useful.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the code was factored out of mdio-octeon.c, the
MODULE_DESCRIPTION, MODULE_AUTHOR and MODULE_LICENSE annotations were
inadvertently omitted. Restore them so that we don't get kernel taint
warnings upon module loading.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Locking ppp_mutex must be done before dereferencing file->private_data,
otherwise it could be modified before ppp_unattached_ioctl() takes the
lock. This could lead ppp_unattached_ioctl() to override ->private_data,
thus leaking reference to the ppp_file previously pointed to.
v2: lock all ppp_ioctl() instead of just checking private_data in
ppp_unattached_ioctl(), to avoid ambiguous behaviour.
Fixes: f3ff8a4d80 ("ppp: push BKL down into the driver")
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Caesar Wang says:
====================
arc_emac: fixes the emac issues and cleanup emac drivers
This series patches are based on kernel 4.5-rc7+ version.
Linux version 4.5.0-rc7-next-20160311+ (wxt@nb) (...) #45 SMP Sun Mar 13 16:17:56
The history patch in here:
Patch-v1: https://lkml.org/lkml/2016/3/11/209
Patch-v2: https://lkml.org/lkml/2016/3/13/39
Verified on kylin board with my github.
https://github.com/Caesar-github/rockchip/tree/kylin/next
That's verified on kylin board with ubuntu os.
This series patches are built all pass with Mr.robot on
https://github.com/Caesar-github/linux/tree/build-emac-v3
How to test and verify?
You can refer to the following wiki document.
http://rockchip.wikidot.com/linux-develop-guide
bootup log:
[ 1.264740] rockchip_emac 10200000.ethernet: no regulator found
[ 1.270908] rockchip_emac 10200000.ethernet: ARC EMAC detected with id: 0x7fd02
[ 1.278362] rockchip_emac 10200000.ethernet: IRQ is 29
[ 1.283747] rockchip_emac 10200000.ethernet: MAC address is now 06:5d:61:c7:39:41
[ 1.291314] rockchip_emac 10200000.ethernet: GPIO lookup for consumer phy-reset
[ 1.291333] rockchip_emac 10200000.ethernet: using device tree for GPIO lookup
[ 1.663155] rockchip_emac 10200000.ethernet: connected to Generic PHY phy with id 0xffffc816
[ 8.863448] rockchip_emac 10200000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
root@localhost:/# busybox ping www.baidu.com
PING www.baidu.com (14.215.177.38): 56 data bytes
64 bytes from 14.215.177.38: seq=0 ttl=48 time=35.046 ms
64 bytes from 14.215.177.38: seq=1 ttl=48 time=35.095 ms
64 bytes from 14.215.177.38: seq=2 ttl=48 time=34.203 ms
64 bytes from 14.215.177.38: seq=3 ttl=48 time=38.516 ms
...
---
1) This series has 6 patches: (1--->9)
net: arc_emac: make the rockchip emac document more compatible
net: arc_emac: add phy reset is optional for device tree
net: arc_emac: support the phy reset for emac driver
net: arc: trivial: cleanup the emac driver
clk: rockchip: add node-id for rk3036 emac hclk
clk: rockchip: associate the rk3036 HCLK_EMAC clock-id
clk: rockchip: add clock-id for rk3036 emac pll source clock
clk: rockchip: associate SCLK_MAC_PLL and disable reparenting on rk3036
ARM: dts: rockchip: add support emac for RK3036
2) This series patches have the following descriptions:
Hi Rob, David:
PATCH[1/9-2/9]: ====>
net: arc_emac: make the rockchip emac document more compatible
net: arc_emac: add phy reset is optional for device tree
The patches change the rockchip emac document for more compatible and
Add the phy reset property for document.
---
Hi David
PATCH[3/9]: ====>
net: arc_emac: support the phy reset for emac driver
The emac didn't work on kylin board since in some case the clocks parent changed.
The kylin hardware connects the phy reset pin, we should use it with real world.
As the previous patch discuss on https://patchwork.kernel.org/patch/8186801/
And as sergei/Heiko suggestions on
https://patchwork.kernel.org/patch/8564571/
---
Hi David
PATCH[4/9]: ====>
net: arc: trivial: cleanup the emac driver
The first time to look the emac drivers, I think that have to cleanup the drivers with scripts.
Although it's the trivial things, in order to be more read.
---
Hi Heiko,Michael,Stephen:
PATCH[5/9-8/9]: ====> clk: rockchip: rk3036: fix and add node id for emac clock
Four-part from https://patchwork.kernel.org/patch/8564581/
clk: rockchip: add node-id for rk3036 emac hclk
clk: rockchip: associate the rk3036 HCLK_EMAC clock-id
clk: rockchip: add clock-id for rk3036 emac pll source clock
clk: rockchip: associate SCLK_MAC_PLL and disable reparenting on rk3036
Add the emac needed clocks for rk3036 SoCs
---
Hi Heiko:
PATCH[9/9]: ====>
ARM: dts: rockchip: add support emac for RK3036
Add the emac needed main info for rk3036 dts.
---
Thanks your reviewing! :)
Changes in v3:
- %s/he/the
- Add the Cc people
- As Sergei comments, the original name is better, so
%s/reset-gpios/phy-reset-gpios
- Add the Cc people.
- Caused the build error since the missing include head file.
- %s/reset/phy-reset to match the device tree.
- Add the Cc people
- Add the Cc people.
- Add the Cc people.
- Add the Cc people.
- Add the Cc people.
- Add the Cc people.
- rename reset-gpio to phy-reset-gpios.
- change the commit.
- remove the pcfg_output_high, that's really not needed for emac.
- Add the Cc people.
- Fixes the 'zhengxing' to 'Xing Zheng'.
Changes in v2:
- change the commit and remove the repeat the name 'rockchip'.
- %s/phy-reset-gpios/reset-gpios
- As the pervious version, Sergei and Heiko comments on
https://patchwork.kernel.org/patch/8564571/.
- Nevermind, add signed-off since Heiko the original patch,
refer the Heiko's test patch on
a943c58878
:)
- As the robot notice the build error since overflow in implicit
constant conversion.
- rename phy-reset-gpio to reset-gpios.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the emac device node for rk3036 SoCs.
We need to let mac clock under the DPLL which is able to provide
the accurate 50MHz what mac_ref need, since that will cause some
unstable things if the cpufreq is working.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: linux-rockchip@lists.infradead.org
Cc: Xing Zheng <zhengxing@rock-chips.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>
The emac needs constant and very specific rate but the possible PLL-sources
are very limited, so we expect the PLL source to be set manually on per
board and don't want it to get changed in an automatic way later.
So add the necessary clock-id and disable reparenting on set_rate calls.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-clk@vger.kernel.org
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Suitable PLLs for the emac on the rk3036 are difficult to find
and one of them is the (continuously changing) APLL. So in most
cases it will be necessary to select a PLL manually.
So add a clock-id for it.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: Xing Zheng <zhengxing@rock-chips.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Associate the new clock id the clock.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: Xing Zheng <zhengxing@rock-chips.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the node-id for the emac hclk to the binding header.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: Xing Zheng <zhengxing@rock-chips.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch will make the driver more readability
The emac has the error and warnings if you run
'scripts/checkpatch.pl -f --subjective xxx' to check.
Let's clean up such trivial details.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: Jiri Kosina <trivial@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexander Kochetkov <al.kochet@gmail.com>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds to support the emac phy reset.
Different boards may require different phy reset duration. Add property
phy-reset-duration for emac driver, so that the boards that need
a longer reset duration can specify it in their device tree.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Cc: Alexander Kochetkov <al.kochet@gmail.com>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the following property for arc_emac.
1) phy-reset-gpios:
The phy-reset-gpio is an optional property for arc emac device tree boot.
Change the binding document to match the driver code.
2) phy-reset-duration:
Different boards may require different phy reset duration. Add property
phy-reset-duration for device tree probe, so that the boards that need
a longer reset duration can specify it in their device tree.
Anyway, we can add the above property for arc emac.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc; Alexander Kochetkov <al.kochet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the rk3036 SoCs to match driver for document since the emac driver
has supported the rk3036 SoCs.
This patch adds the rk3036/rk3066/rk3188 SoCS to compatible for rockchip
emac ducument. Also, that will suit for other SoCs in the future.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexander Kochetkov <al.kochet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the ETHTOOL_GLINKSETTINGS implementation finds that userland is
using the wrong number of words of link mode bitmaps (or is trying to
find out the right numbers) it sets the cmd field to 0 in the response
structure.
This is inconsistent with the implementation of every other ethtool
command, so let's remove that inconsistency before it gets into a
stable release.
Fixes: 3f1ac7a700 ("net: ethtool: add new ETHTOOL_xLINKSETTINGS API")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Iff sh_eth_phy_start() call fails in sh_eth_open(), the netif_start_queue()
call done by sh_eth_dev_init() is not undone. In order to deal with that,
stop calling netif_start_queue() from there, so that it can be called only
when the device is fully opened and sh_eth_dev_init() only deals with the
hardware initialization, symmetrically to sh_eth_dev_exit()...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller
Sowmini Varadhan
Robert Jarzmik
Zhang Shengju
Dan Carpenter
Daniel Borkmann
Arnd Bergmann
Aaron Young
Yuval Mintz
Yoshihiro Kaneko
Manish Chopra
Phil Reid
Simon Horman
David Daney
Wu Fengguang
Schemmel Hans-Christoph
Eric Dumazet
Guillaume Nault
Xing Zheng
Heiko Stuebner
Caesar Wang
Ben Hutchings
Sergei Shtylyov