The commit c404e0dc (Btrfs: fix use-after-free in the finishing
procedure of the device replace) fixed a use-after-free problem
which happened when removing the source device at the end of device
replace, but at that time, btrfs didn't support device replace
on raid56, so we didn't fix the problem on the raid56 profile.
Currently, we implemented device replace for raid56, so we need
kick that problem out before we enable that function for raid56.
The fix method is very simple, we just increase the bio per-cpu
counter before we submit a raid56 io, and decrease the counter
when the raid56 io ends.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
This function reused the code of parity scrub, and we just write
the right parity or corrected parity into the target device before
the parity scrub end.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
The implementation is:
- Read and check all the data with checksum in the same stripe.
All the data which has checksum is COW data, and we are sure
that it is not changed though we don't lock the stripe. because
the space of that data just can be reclaimed after the current
transction is committed, and then the fs can use it to store the
other data, but when doing scrub, we hold the current transaction,
that is that data can not be recovered, it is safe that read and check
it out of the stripe lock.
- Lock the stripe
- Read out all the data without checksum and parity
The data without checksum and the parity may be changed if we don't
lock the stripe, so we need read it in the stripe lock context.
- Check the parity
- Re-calculate the new parity and write back it if the old parity
is not right
- Unlock the stripe
If we can not read out the data or the data we read is corrupted,
we will try to repair it. If the repair fails. we will mark the
horizontal sub-stripe(pages on the same horizontal) as corrupted
sub-stripe, and we will skip the parity check and repair of that
horizontal sub-stripe.
And in order to skip the horizontal sub-stripe that has no data, we
introduce a bitmap. If there is some data on the horizontal sub-stripe,
we will the relative bit to 1, and when we check and repair the
parity, we will skip those horizontal sub-stripes that the relative
bits is 0.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
This patch implement the RAID5/6 common data repair function, the
implementation is similar to the scrub on the other RAID such as
RAID1, the differentia is that we don't read the data from the
mirror, we use the data repair function of RAID5/6.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
This can be reproduced by fstests: btrfs/070
The scenario is like the following:
replace worker thread defrag thread
--------------------- -------------
copy_nocow_pages_worker btrfs_defrag_file
copy_nocow_pages_for_inode ...
btrfs_writepages
|A| lock_extent_bits extent_write_cache_pages
|B| lock_page
__extent_writepage
... writepage_delalloc
find_lock_delalloc_range
|B| lock_extent_bits
find_or_create_page
pagecache_get_page
|A| lock_page
This leads to an ABBA pattern deadlock. To fix it,
o we just change it to an AABB pattern which means to @unlock_extent_bits()
before we @lock_page(), and in this way the @extent_read_full_page_nolock()
is no longer in an locked context, so change it back to @extent_read_full_page()
to regain protection.
o Since we @unlock_extent_bits() earlier, then before @write_page_nocow(),
the extent may not really point at the physical block we want, so we
have to check it before write.
Signed-off-by: Gui Hecheng <guihc.fnst@cn.fujitsu.com>
Tested-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
We could not use clean_io_failure in the direct IO path because it got the
filesystem information from the page structure, but the page in the direct
IO bio didn't have the filesystem information in its structure. So we need
modify it and pass all the information it need by parameters.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
The original code of repair_io_failure was just used for buffered read,
because it got some filesystem data from page structure, it is safe for
the page in the page cache. But when we do a direct read, the pages in bio
are not in the page cache, that is there is no filesystem data in the page
structure. In order to implement direct read data repair, we need modify
repair_io_failure and pass all filesystem data it need by function
parameters.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
total_size will be changed when resizing a device, and disk_total_size
will be changed if resizing is successful. Meanwhile, the on-disk super
blocks of the previous transaction might not be updated. Considering
the consistency of the metadata in the previous transaction, We should
use the size in the previous transaction to check if the super block is
beyond the boundary of the device. Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
The super block generation of the seed devices is not the same as the
filesystem which sprouted from them because we don't update the super
block on the seed devices when we change that new filesystem. So we
should not use the generation of that new filesystem to check the super
block generation on the seed devices, Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
All the metadata in the seed devices has the same fsid as the fsid
of the seed filesystem which is on the seed device, so we should check
them by the current filesystem. Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
The nodesize and leafsize were never of different values. Unify the
usage and make nodesize the one. Cleanup the redundant checks and
helpers.
Shaves a few bytes from .text:
text data bss dec hex filename
852418 24560 23112 900090 dbbfa btrfs.ko.before
851074 24584 23112 898770 db6d2 btrfs.ko.after
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
btrfs_set_key_type and btrfs_key_type are used inconsistently along with
open coded variants. Other members of btrfs_key are accessed directly
without any helpers anyway.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
This has been reported and discussed for a long time, and this hang occurs in
both 3.15 and 3.16.
Btrfs now migrates to use kernel workqueue, but it introduces this hang problem.
Btrfs has a kind of work queued as an ordered way, which means that its
ordered_func() must be processed in the way of FIFO, so it usually looks like --
normal_work_helper(arg)
work = container_of(arg, struct btrfs_work, normal_work);
work->func() <---- (we name it work X)
for ordered_work in wq->ordered_list
ordered_work->ordered_func()
ordered_work->ordered_free()
The hang is a rare case, first when we find free space, we get an uncached block
group, then we go to read its free space cache inode for free space information,
so it will
file a readahead request
btrfs_readpages()
for page that is not in page cache
__do_readpage()
submit_extent_page()
btrfs_submit_bio_hook()
btrfs_bio_wq_end_io()
submit_bio()
end_workqueue_bio() <--(ret by the 1st endio)
queue a work(named work Y) for the 2nd
also the real endio()
So the hang occurs when work Y's work_struct and work X's work_struct happens
to share the same address.
A bit more explanation,
A,B,C -- struct btrfs_work
arg -- struct work_struct
kthread:
worker_thread()
pick up a work_struct from @worklist
process_one_work(arg)
worker->current_work = arg; <-- arg is A->normal_work
worker->current_func(arg)
normal_work_helper(arg)
A = container_of(arg, struct btrfs_work, normal_work);
A->func()
A->ordered_func()
A->ordered_free() <-- A gets freed
B->ordered_func()
submit_compressed_extents()
find_free_extent()
load_free_space_inode()
... <-- (the above readhead stack)
end_workqueue_bio()
btrfs_queue_work(work C)
B->ordered_free()
As if work A has a high priority in wq->ordered_list and there are more ordered
works queued after it, such as B->ordered_func(), its memory could have been
freed before normal_work_helper() returns, which means that kernel workqueue
code worker_thread() still has worker->current_work pointer to be work
A->normal_work's, ie. arg's address.
Meanwhile, work C is allocated after work A is freed, work C->normal_work
and work A->normal_work are likely to share the same address(I confirmed this
with ftrace output, so I'm not just guessing, it's rare though).
When another kthread picks up work C->normal_work to process, and finds our
kthread is processing it(see find_worker_executing_work()), it'll think
work C as a collision and skip then, which ends up nobody processing work C.
So the situation is that our kthread is waiting forever on work C.
Besides, there're other cases that can lead to deadlock, but the real problem
is that all btrfs workqueue shares one work->func, -- normal_work_helper,
so this makes each workqueue to have its own helper function, but only a
wraper pf normal_work_helper.
With this patch, I no long hit the above hang.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
We should not write data into a readonly device especially seed device when
doing scrub, skip those devices.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
When run scrub with balance, sometimes -ENOENT will be returned, since
in scrub_enumerate_chunks() will search dev_extent in *COMMIT_ROOT*, but
btrfs_lookup_block_group() will search block group in *MEMORY*, so if a
chunk is removed but not committed, -ENOENT will be returned.
However, there is no need to stop scrubbing since other chunks may be
scrubbed without problem.
So this patch changes the behavior to skip removed chunks and continue
to scrub the rest.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
The skinny extents are intepreted incorrectly in scrub_print_warning(),
and end up hitting the BUG() in btrfs_extent_inline_ref_size.
Reported-by: Konstantinos Skarlatos <k.skarlatos@gmail.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
iput() already checks for the inode being NULL, thus it's unnecessary to
check before calling.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Chris Mason <clm@fb.com>
Pull second set of btrfs updates from Chris Mason:
"The most important changes here are from Josef, fixing a btrfs
regression in 3.14 that can cause corruptions in the extent allocation
tree when snapshots are in use.
Josef also fixed some deadlocks in send/recv and other assorted races
when balance is running"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (23 commits)
Btrfs: fix compile warnings on on avr32 platform
btrfs: allow mounting btrfs subvolumes with different ro/rw options
btrfs: export global block reserve size as space_info
btrfs: fix crash in remount(thread_pool=) case
Btrfs: abort the transaction when we don't find our extent ref
Btrfs: fix EINVAL checks in btrfs_clone
Btrfs: fix unlock in __start_delalloc_inodes()
Btrfs: scrub raid56 stripes in the right way
Btrfs: don't compress for a small write
Btrfs: more efficient io tree navigation on wait_extent_bit
Btrfs: send, build path string only once in send_hole
btrfs: filter invalid arg for btrfs resize
Btrfs: send, fix data corruption due to incorrect hole detection
Btrfs: kmalloc() doesn't return an ERR_PTR
Btrfs: fix snapshot vs nocow writting
btrfs: Change the expanding write sequence to fix snapshot related bug.
btrfs: make device scan less noisy
btrfs: fix lockdep warning with reclaim lock inversion
Btrfs: hold the commit_root_sem when getting the commit root during send
Btrfs: remove transaction from send
...
fs/btrfs/scrub.c: In function 'get_raid56_logic_offset':
fs/btrfs/scrub.c:2269: warning: comparison of distinct pointer types lacks a cast
fs/btrfs/scrub.c:2269: warning: right shift count >= width of type
fs/btrfs/scrub.c:2269: warning: passing argument 1 of '__div64_32' from incompatible pointer type
Since @rot is an int type, we should not use do_div(), fix it.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Steps to reproduce:
# mkfs.btrfs -f /dev/sda[8-11] -m raid5 -d raid5
# mount /dev/sda8 /mnt
# btrfs scrub start -BR /mnt
# echo $? <--unverified errors make return value be 3
This is because we don't setup right mapping between physical
and logical address for raid56, which makes checksum mismatch.
But we will find everthing is fine later when rechecking using
btrfs_map_block().
This patch fixed the problem by settuping right mappings and
we only verify data stripes' checksums.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull btrfs changes from Chris Mason:
"This is a pretty long stream of bug fixes and performance fixes.
Qu Wenruo has replaced the btrfs async threads with regular kernel
workqueues. We'll keep an eye out for performance differences, but
it's nice to be using more generic code for this.
We still have some corruption fixes and other patches coming in for
the merge window, but this batch is tested and ready to go"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (108 commits)
Btrfs: fix a crash of clone with inline extents's split
btrfs: fix uninit variable warning
Btrfs: take into account total references when doing backref lookup
Btrfs: part 2, fix incremental send's decision to delay a dir move/rename
Btrfs: fix incremental send's decision to delay a dir move/rename
Btrfs: remove unnecessary inode generation lookup in send
Btrfs: fix race when updating existing ref head
btrfs: Add trace for btrfs_workqueue alloc/destroy
Btrfs: less fs tree lock contention when using autodefrag
Btrfs: return EPERM when deleting a default subvolume
Btrfs: add missing kfree in btrfs_destroy_workqueue
Btrfs: cache extent states in defrag code path
Btrfs: fix deadlock with nested trans handles
Btrfs: fix possible empty list access when flushing the delalloc inodes
Btrfs: split the global ordered extents mutex
Btrfs: don't flush all delalloc inodes when we doesn't get s_umount lock
Btrfs: reclaim delalloc metadata more aggressively
Btrfs: remove unnecessary lock in may_commit_transaction()
Btrfs: remove the unnecessary flush when preparing the pages
Btrfs: just do dirty page flush for the inode with compression before direct IO
...
Since the "_struct" suffix is mainly used for distinguish the differnt
btrfs_work between the original and the newly created one,
there is no need using the suffix since all btrfs_workers are changed
into btrfs_workqueue.
Also this patch fixed some codes whose code style is changed due to the
too long "_struct" suffix.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Tested-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Replace the fs_info->scrub_* with the newly created
btrfs_workqueue.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Tested-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>
check if @scrubs_running=@scrubs_paused condition inside wait_event()
is not an atomic operation which means we may inc/dec @scrub_running/
paused at any time. Let's wake up @scrub_pause_wait as much as we can
to let commit transaction blocked less.
An example below:
Thread1 Thread2
|->scrub_blocked_if_needed() |->scrub_pending_trans_workers_inc
|->increase @scrub_paused
|->increase @scrub_running
|->wake up scrub_pause_wait list
|->scrub blocked
|->increase @scrub_paused
Thread3 is commiting transaction which is blocked at btrfs_scrub_pause().
So after Thread2 increase @scrub_paused, we meet the condition
@scrub_paused=@scrub_running, but transaction will be still blocked until
another calling to wake up @scrub_pause_wait.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
commit cb7ab02156 cause a following deadlock found by
xfstests,btrfs/011:
Thread1 is commiting transaction which is blocked at
btrfs_scrub_pause().
Thread2 is calling btrfs_file_aio_write() which has held
inode's @i_mutex and commit transaction(blocked because
Thread1 is committing transaction).
Thread3 is copy_nocow_page worker which will also try to
hold inode @i_mutex, so thread3 will wait Thread1 finished.
Thread4 is waiting pending workers finished which will wait
Thread3 finished. So the problem is like this:
Thread1--->Thread4--->Thread3--->Thread2---->Thread1
Deadlock happens! we fix it by letting Thread1 go firstly,
which means we won't block transaction commit while we are
waiting pending workers finished.
Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Pull btrfs updates from Chris Mason:
"This is a pretty big pull, and most of these changes have been
floating in btrfs-next for a long time. Filipe's properties work is a
cool building block for inheriting attributes like compression down on
a per inode basis.
Jeff Mahoney kicked in code to export filesystem info into sysfs.
Otherwise, lots of performance improvements, cleanups and bug fixes.
Looks like there are still a few other small pending incrementals, but
I wanted to get the bulk of this in first"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (149 commits)
Btrfs: fix spin_unlock in check_ref_cleanup
Btrfs: setup inode location during btrfs_init_inode_locked
Btrfs: don't use ram_bytes for uncompressed inline items
Btrfs: fix btrfs_search_slot_for_read backwards iteration
Btrfs: do not export ulist functions
Btrfs: rework ulist with list+rb_tree
Btrfs: fix memory leaks on walking backrefs failure
Btrfs: fix send file hole detection leading to data corruption
Btrfs: add a reschedule point in btrfs_find_all_roots()
Btrfs: make send's file extent item search more efficient
Btrfs: fix to catch all errors when resolving indirect ref
Btrfs: fix protection between walking backrefs and root deletion
btrfs: fix warning while merging two adjacent extents
Btrfs: fix infinite path build loops in incremental send
btrfs: undo sysfs when open_ctree() fails
Btrfs: fix snprintf usage by send's gen_unique_name
btrfs: fix defrag 32-bit integer overflow
btrfs: sysfs: list the NO_HOLES feature
btrfs: sysfs: don't show reserved incompat feature
btrfs: call permission checks earlier in ioctls and return EPERM
...
There is a bug that using btrfs_previous_item() to search metadata extent item.
This is because in btrfs_previous_item(), we need type match, however, since
skinny metada was introduced by josef, we may mix this two types. So just
use btrfs_previous_item() is not working right.
To keep btrfs_previous_item() like normal tree search, i introduce another
function btrfs_previous_extent_item().
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Check if we support skinny metadata firstly and fix to use
right type to search.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Convert all applicable cases of printk and pr_* to the btrfs_* macros.
Fix all uses of the BTRFS prefix.
Signed-off-by: Frank Holton <fholton@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Just wrap same code into one function scrub_blocked_if_needed().
This make a change that we will move waiting (@workers_pending = 0)
before we can wake up commiting transaction(atomic_inc(@scrub_paused)),
we must take carefully to not deadlock here.
Thread 1 Thread 2
|->btrfs_commit_transaction()
|->set trans type(COMMIT_DOING)
|->btrfs_scrub_paused()(blocked)
|->join_transaction(blocked)
Move btrfs_scrub_paused() before setting trans type which means we can
still join a transaction when commiting_transaction is blocked.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Suggested-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
We came a race condition when scrubbing superblocks, the story is:
In commiting transaction, we will update @last_trans_commited after
writting superblocks, if scrubber start after writting superblocks
and before updating @last_trans_commited, generation mismatch happens!
We fix this by checking @scrub_pause_req, and we won't start a srubber
until commiting transaction is finished.(after btrfs_scrub_continue()
finished.)
Reported-by: Sebastian Ochmann <ochmann@informatik.uni-bonn.de>
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull block layer fixes from Jens Axboe:
"A small collection of fixes for the current series. It contains:
- A fix for a use-after-free of a request in blk-mq. From Ming Lei
- A fix for a blk-mq bug that could attempt to dereference a NULL rq
if allocation failed
- Two xen-blkfront small fixes
- Cleanup of submit_bio_wait() type uses in the kernel, unifying
that. From Kent
- A fix for 32-bit blkg_rwstat reading. I apologize for this one
looking mangled in the shortlog, it's entirely my fault for missing
an empty line between the description and body of the text"
* 'for-linus' of git://git.kernel.dk/linux-block:
blk-mq: fix use-after-free of request
blk-mq: fix dereference of rq->mq_ctx if allocation fails
block: xen-blkfront: Fix possible NULL ptr dereference
xen-blkfront: Silence pfn maybe-uninitialized warning
block: submit_bio_wait() conversions
Update of blkg_stat and blkg_rwstat may happen in bh context
It was being open coded in a few places.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joern Engel <joern@logfs.org>
Cc: Prasad Joshi <prasadjoshi.linux@gmail.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Chris Mason <chris.mason@fusionio.com>
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It was being open coded in a few places.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joern Engel <joern@logfs.org>
Cc: Prasad Joshi <prasadjoshi.linux@gmail.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Chris Mason <chris.mason@fusionio.com>
Acked-by: NeilBrown <neilb@suse.de>
Currently if we discover an error when scrubbing in ro mode we a)
blindly increment the uncorrectable_errors counter, and b) spam the
dmesg with the 'unable to fixup (regular) error at ...' message, even
though a) we haven't tried to determine if the error is correctable or
not, and b) we haven't tried to fixup anything. Fix this.
Cc: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
We only allocate scrub workers if we pass all the necessary
checks, for example, there are no operation in progress.
Besides, move mutex lock protection outside of scrub_workers_get()
/scrub_workers_put().
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Originally, we introduced scrub_super_lock to synchronize
tree log code with scrubbing super.
However we can replace scrub_super_lock with device_list_mutex,
because writing super will hold this mutex, this will reduce an extra
lock holding when writing supers in sync log code.
Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Replace progresses strictly from lower to higher offsets, and the
progress is tracked in chunks, by storing the physical offset of the
dev_extent which is being copied in the cursor_left field of
btrfs_dev_replace_item. When we are done copying the chunk,
left_cursor is updated to point one byte past the dev_extent, so that
on resume we can skip the dev_extents that have already been copied.
There is a major bug (which goes all the way back to the inception of
dev-replace in 3.8) in the way left_cursor is bumped: the bump is done
unconditionally, without any regard to the scrub_chunk return value.
On suspend (and also on any kind of error) scrub_chunk returns early,
i.e. without completing the copy. This leads to us skipping the chunk
that hasn't been fully copied yet when resuming.
Fix this by doing the cursor_left update only if scrub_chunk ret is 0.
(On suspend scrub_chunk returns with -ECANCELED, so this fix covers
both suspend and error cases.)
Cc: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Various people have hit a deadlock when running btrfs/011. This is because when
replacing nocow extents we will take the i_mutex to make sure nobody messes with
the file while we are replacing the extent. The problem is we are already
holding a transaction open, which is a locking inversion, so instead we need to
save these inodes we find and then process them outside of the transaction.
Further we can't just lock the inode and assume we are good to go. We need to
lock the extent range and then read back the extent cache for the inode to make
sure the extent really still points at the physical block we want. If it
doesn't we don't have to copy it. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
btrfs_read_fs_root_no_name() already checks if btrfs_root_refs()
is zero and returns ENOENT in this case. There is no need to do
it again in three more places.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
mirror_num is always "int", hence don't cast it to "unsigned long long" and
format it as a 64-bit number.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
PAGE_SIZE is "unsigned long" everywhere, so there's no need to cast it to
"unsigned long long" and format it as a 64-bit number.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
u64 is "unsigned long long" on all architectures now, so there's no need to
cast it when formatting it using the "ll" length modifier.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Some codes still use the cpu_to_lexx instead of the
BTRFS_SETGET_STACK_FUNCS declared in ctree.h.
Also added some BTRFS_SETGET_STACK_FUNCS for btrfs_header btrfs_timespec
and other structures.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Miao Xie <miaoxie@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Miao Xie reported the following issue:
The filesystem was corrupted after we did a device replace.
Steps to reproduce:
# mkfs.btrfs -f -m single -d raid10 <device0>..<device3>
# mount <device0> <mnt>
# btrfs replace start -rfB 1 <device4> <mnt>
# umount <mnt>
# btrfsck <device4>
The reason for the issue is that we changed the write offset by mistake,
introduced by commit 625f1c8dc.
We read the data from the source device at first, and then write the
data into the corresponding place of the new device. In order to
implement the "-r" option, the source location is remapped using
btrfs_map_block(). The read takes place on the mapped location, and
the write needs to take place on the unmapped location. Currently
the write is using the mapped location, and this commit changes it
back by undoing the change to the write address that the aforementioned
commit added by mistake.
Reported-by: Miao Xie <miaox@cn.fujitsu.com>
Cc: <stable@vger.kernel.org> # 3.10+
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
- It makes no sense that we deal with a inode in the dead tree.
- fix the race between dio and page copy by waiting the dio completion
- avoid the page copy vs truncate/punch hole
- check if the page is in the page cache or not
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Chris Mason
Miao Xie
Gui Hecheng
David Sterba
Liu Bo
Qu Wenruo
Tobias Klauser
Linus Torvalds
Wang Shilong
Frank Holton
Valentina Giusti
Kent Overstreet
Ilya Dryomov
Josef Bacik
Stefan Behrens
Geert Uytterhoeven