Граф коммитов

874 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds 4dc4226f99 ACPI and power management updates for 3.16-rc1
- ACPICA update to upstream version 20140424.  That includes a
    number of fixes and improvements related to things like GPE
    handling, table loading, headers, memory mapping and unmapping,
    DSDT/SSDT overriding, and the Unload() operator.  The acpidump
    utility from upstream ACPICA is included too.  From Bob Moore,
    Lv Zheng, David Box, David Binderman, and Colin Ian King.
 
  - Fixes and cleanups related to ACPI video and backlight interfaces
    from Hans de Goede.  That includes blacklist entries for some new
    machines and using native backlight by default.
 
  - ACPI device enumeration changes to create platform devices
    rather than PNP devices for ACPI device objects with _HID by
    default.  PNP devices will still be created for the ACPI device
    object with device IDs corresponding to real PNP devices, so
    that change should not break things left and right, and we're
    expecting to see more and more ACPI-enumerated platform devices
    in the future.  From Zhang Rui and Rafael J Wysocki.
 
  - Updates for the ACPI LPSS (Low-Power Subsystem) driver allowing
    it to handle system suspend/resume on Asus T100 correctly.
    From Heikki Krogerus and Rafael J Wysocki.
 
  - PM core update introducing a mechanism to allow runtime-suspended
    devices to stay suspended over system suspend/resume transitions
    if certain additional conditions related to coordination within
    device hierarchy are met.  Related PM documentation update and
    ACPI PM domain support for the new feature.  From Rafael J Wysocki.
 
  - Fixes and improvements related to the "freeze" sleep state. They
    affect several places including cpuidle, PM core, ACPI core, and
    the ACPI battery driver.  From Rafael J Wysocki and Zhang Rui.
 
  - Miscellaneous fixes and updates of the ACPI core from Aaron Lu,
    Bjørn Mork, Hanjun Guo, Lan Tianyu, and Rafael J Wysocki.
 
  - Fixes and cleanups for the ACPI processor and ACPI PAD (Processor
    Aggregator Device) drivers from Baoquan He, Manuel Schölling,
    Tony Camuso, and Toshi Kani.
 
  - System suspend/resume optimization in the ACPI battery driver from
    Lan Tianyu.
 
  - OPP (Operating Performance Points) subsystem updates from
    Chander Kashyap, Mark Brown, and Nishanth Menon.
 
  - cpufreq core fixes, updates and cleanups from Srivatsa S Bhat,
    Stratos Karafotis, and Viresh Kumar.
 
  - Updates, fixes and cleanups for the Tegra, powernow-k8, imx6q,
    s5pv210, nforce2, and powernv cpufreq drivers from Brian Norris,
    Jingoo Han, Paul Bolle, Philipp Zabel, Stratos Karafotis, and
    Viresh Kumar.
 
  - intel_pstate driver fixes and cleanups from Dirk Brandewie,
    Doug Smythies, and Stratos Karafotis.
 
  - Enabling the big.LITTLE cpufreq driver on arm64 from Mark Brown.
 
  - Fix for the cpuidle menu governor from Chander Kashyap.
 
  - New ARM clps711x cpuidle driver from Alexander Shiyan.
 
  - Hibernate core fixes and cleanups from Chen Gang, Dan Carpenter,
    Fabian Frederick, Pali Rohár, and Sebastian Capella.
 
  - Intel RAPL (Running Average Power Limit) driver updates from
    Jacob Pan.
 
  - PNP subsystem updates from Bjorn Helgaas and Fabian Frederick.
 
  - devfreq core updates from Chanwoo Choi and Paul Bolle.
 
  - devfreq updates for exynos4 and exynos5 from Chanwoo Choi and
    Bartlomiej Zolnierkiewicz.
 
  - turbostat tool fix from Jean Delvare.
 
  - cpupower tool updates from Prarit Bhargava, Ramkumar Ramachandra
    and Thomas Renninger.
 
  - New ACPI ec_access.c tool for poking at the EC in a safe way
    from Thomas Renninger.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJTjl16AAoJEILEb/54YlRxeKgP/RRQSV7lFtf582Dw/5M/iWOg
 qYeNtuYFLArEmJ7SpxHdKsU1ZRm3CahAS1j7grvQMQasUxTzoavMcSBNZefeaoNK
 d01LVNqcyKCZs3+izRezk5N1IY+AjdrOcqCdIk8rfgFnc6kOttYUrVcIzKuIKAvJ
 MsJ5s/uqP8G69FsAA3Ttdtr0HKiQhN4skSt424wntQRDeJNZPBs74mPKBGh8bxlO
 Zr/VCDibKQ2Z8jS7x+TzwZrOxgE1/9x0Cub6GAdTvAfS8A+utPwSkneUyopNqpQ+
 tJ5rz5R+HpmPMerizBuU+5s+tvjDPtH4/OZvOPSpYraQSFLOwx3hAm+a5k7fOGmc
 XWjXnXWT0i0V3iQkwrspTNjX1RgywbsHbmXrcWn192HResvMQ9zk2gH2ch6m8JhN
 yTV5V51dOZicpPuaTCvIkJpsV33p6vRz+EdPBiXoEdua5KKtOg8EnQ470dNaMR92
 3ZtWmIvSgGlyPyHlSHLfGXbPUwTYvDNV3aheIoXp9E6WY3WJN9J3WXm4EHKBNVaI
 H83kwuk1s92cgqh22H5Pcb0CmDcrbkUdP6hhsPS/aL80/EJMljRP2AYW1Y+l1LAf
 pzMLmekHFqQEDjFQltwGvFV/EjFeMHnqOgQONx9ygMaayCGGTYSDx3FbRDesf8t9
 qhoFcTPSxoo0XjrGrR6b
 =tpdF
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm into next

Pull ACPI and power management updates from Rafael Wysocki:
 "ACPICA is the leader this time (63 commits), followed by cpufreq (28
  commits), devfreq (15 commits), system suspend/hibernation (12
  commits), ACPI video and ACPI device enumeration (10 commits each).

  We have no major new features this time, but there are a few
  significant changes of how things work.  The most visible one will
  probably be that we are now going to create platform devices rather
  than PNP devices by default for ACPI device objects with _HID.  That
  was long overdue and will be really necessary to be able to use the
  same drivers for the same hardware blocks on ACPI and DT-based systems
  going forward.  We're not expecting fallout from this one (as usual),
  but it's something to watch nevertheless.

  The second change having a chance to be visible is that ACPI video
  will now default to using native backlight rather than the ACPI
  backlight interface which should generally help systems with broken
  Win8 BIOSes.  We're hoping that all problems with the native backlight
  handling that we had previously have been addressed and we are in a
  good enough shape to flip the default, but this change should be easy
  enough to revert if need be.

  In addition to that, the system suspend core has a new mechanism to
  allow runtime-suspended devices to stay suspended throughout system
  suspend/resume transitions if some extra conditions are met
  (generally, they are related to coordination within device hierarchy).
  However, enabling this feature requires cooperation from the bus type
  layer and for now it has only been implemented for the ACPI PM domain
  (used by ACPI-enumerated platform devices mostly today).

  Also, the acpidump utility that was previously shipped as a separate
  tool will now be provided by the upstream ACPICA along with the rest
  of ACPICA code, which will allow it to be more up to date and better
  supported, and we have one new cpuidle driver (ARM clps711x).

  The rest is improvements related to certain specific use cases,
  cleanups and fixes all over the place.

  Specifics:

   - ACPICA update to upstream version 20140424.  That includes a number
     of fixes and improvements related to things like GPE handling,
     table loading, headers, memory mapping and unmapping, DSDT/SSDT
     overriding, and the Unload() operator.  The acpidump utility from
     upstream ACPICA is included too.  From Bob Moore, Lv Zheng, David
     Box, David Binderman, and Colin Ian King.

   - Fixes and cleanups related to ACPI video and backlight interfaces
     from Hans de Goede.  That includes blacklist entries for some new
     machines and using native backlight by default.

   - ACPI device enumeration changes to create platform devices rather
     than PNP devices for ACPI device objects with _HID by default.  PNP
     devices will still be created for the ACPI device object with
     device IDs corresponding to real PNP devices, so that change should
     not break things left and right, and we're expecting to see more
     and more ACPI-enumerated platform devices in the future.  From
     Zhang Rui and Rafael J Wysocki.

   - Updates for the ACPI LPSS (Low-Power Subsystem) driver allowing it
     to handle system suspend/resume on Asus T100 correctly.  From
     Heikki Krogerus and Rafael J Wysocki.

   - PM core update introducing a mechanism to allow runtime-suspended
     devices to stay suspended over system suspend/resume transitions if
     certain additional conditions related to coordination within device
     hierarchy are met.  Related PM documentation update and ACPI PM
     domain support for the new feature.  From Rafael J Wysocki.

   - Fixes and improvements related to the "freeze" sleep state.  They
     affect several places including cpuidle, PM core, ACPI core, and
     the ACPI battery driver.  From Rafael J Wysocki and Zhang Rui.

   - Miscellaneous fixes and updates of the ACPI core from Aaron Lu,
     Bjørn Mork, Hanjun Guo, Lan Tianyu, and Rafael J Wysocki.

   - Fixes and cleanups for the ACPI processor and ACPI PAD (Processor
     Aggregator Device) drivers from Baoquan He, Manuel Schölling, Tony
     Camuso, and Toshi Kani.

   - System suspend/resume optimization in the ACPI battery driver from
     Lan Tianyu.

   - OPP (Operating Performance Points) subsystem updates from Chander
     Kashyap, Mark Brown, and Nishanth Menon.

   - cpufreq core fixes, updates and cleanups from Srivatsa S Bhat,
     Stratos Karafotis, and Viresh Kumar.

   - Updates, fixes and cleanups for the Tegra, powernow-k8, imx6q,
     s5pv210, nforce2, and powernv cpufreq drivers from Brian Norris,
     Jingoo Han, Paul Bolle, Philipp Zabel, Stratos Karafotis, and
     Viresh Kumar.

   - intel_pstate driver fixes and cleanups from Dirk Brandewie, Doug
     Smythies, and Stratos Karafotis.

   - Enabling the big.LITTLE cpufreq driver on arm64 from Mark Brown.

   - Fix for the cpuidle menu governor from Chander Kashyap.

   - New ARM clps711x cpuidle driver from Alexander Shiyan.

   - Hibernate core fixes and cleanups from Chen Gang, Dan Carpenter,
     Fabian Frederick, Pali Rohár, and Sebastian Capella.

   - Intel RAPL (Running Average Power Limit) driver updates from Jacob
     Pan.

   - PNP subsystem updates from Bjorn Helgaas and Fabian Frederick.

   - devfreq core updates from Chanwoo Choi and Paul Bolle.

   - devfreq updates for exynos4 and exynos5 from Chanwoo Choi and
     Bartlomiej Zolnierkiewicz.

   - turbostat tool fix from Jean Delvare.

   - cpupower tool updates from Prarit Bhargava, Ramkumar Ramachandra
     and Thomas Renninger.

   - New ACPI ec_access.c tool for poking at the EC in a safe way from
     Thomas Renninger"

* tag 'pm+acpi-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (187 commits)
  ACPICA: Namespace: Remove _PRP method support.
  intel_pstate: Improve initial busy calculation
  intel_pstate: add sample time scaling
  intel_pstate: Correct rounding in busy calculation
  intel_pstate: Remove C0 tracking
  PM / hibernate: fixed typo in comment
  ACPI: Fix x86 regression related to early mapping size limitation
  ACPICA: Tables: Add mechanism to control early table checksum verification.
  ACPI / scan: use platform bus type by default for _HID enumeration
  ACPI / scan: always register ACPI LPSS scan handler
  ACPI / scan: always register memory hotplug scan handler
  ACPI / scan: always register container scan handler
  ACPI / scan: Change the meaning of missing .attach() in scan handlers
  ACPI / scan: introduce platform_id device PNP type flag
  ACPI / scan: drop unsupported serial IDs from PNP ACPI scan handler ID list
  ACPI / scan: drop IDs that do not comply with the ACPI PNP ID rule
  ACPI / PNP: use device ID list for PNPACPI device enumeration
  ACPI / scan: .match() callback for ACPI scan handlers
  ACPI / battery: wakeup the system only when necessary
  power_supply: allow power supply devices registered w/o wakeup source
  ...
2014-06-04 08:57:16 -07:00
Linus Torvalds 312c76f1a3 regulator: Updates for v3.16
The bulk of the changes for this release are a few new drivers however
 there are a couple of noticable core changes and the usual stream of
 cleanups and fixes:
 
  - Move disable of unused regulators later in init so it comes after
    deferred probe has iterated making startup smoother.
  - Fixes reference counting of the DT nodes for constraints from Charles
    Keepax.  This has little practical impact since all real users of
    the regulator bindings use FDT which doesn't need the reference
    counting.
  - Lots of cleanups, especially to the Samsung drivers.
  - Support for Linear Technologies LTC3589, Texas Instruments TPS658640
    and X-Powers AXP20x.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTjaRuAAoJELSic+t+oim96AAP/jNtqLoBLIz6Idwg29Jd3Gj+
 X3R+5NfuS0kccvKvIbHmKygwJ6hY9anBsKQ28AH6VUAgcUqrPnWiRyl4iZAyMSQZ
 bweQ1QSAIxjAD9J+hMSMU65h3pKh7t6k20dumEUOJZ/ZuPmYj5aks3dy+DKSIkF2
 GDG1SVonxheuhUbxEPnXlz5pSnFtERQQMGPdYzk3RxqdeDeVr6Oanlxuo/IKagPP
 vm6BFFutEcSk4KpkEQF+iGxIDTzTFGjMe2TzDu1ubxsxcL+5sNh8rkN9rbqQ0fdo
 fGMZuo9AXEPXNDwY6ug0Mxoqhg0vrf8NSnEWjM6zQJELKH6H4KMhwAGjstCDkFer
 rsuZXeIM1Mk1wrPP6QWLvHVqwS9GUXki82ZgUpDOn61HpRLUu6bKY8eWoq3UM79S
 qiRoNSW7eggI0/71IrzumWWE8HEufEJEgGNAqwFPkBywCg+biXjkHlcXdyBMCpqy
 kUev0QVJb3FHBnyIdMAVm8hrreejh+frl2Nc+aIEhYZxc3idvVqKl1lvjbObt6PM
 FK52n8c/WlQxLZ8+isv0b1+pwT6QHeLzBvBA8mE6+Mn4vLzQKT4nofQU4PSASRSM
 UqkaSMhaaJ4WRXlNdhkp721EbRAltrTwzjMS/7lTTZRyN9g9ODOhDnzRT2f3J8F1
 JYS22jFTL5ywNR6GFcq0
 =JrfM
 -----END PGP SIGNATURE-----

Merge tag 'regulator-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into next

Pull regulator updates from Mark Brown:
 "The bulk of the changes for this release are a few new drivers however
  there are a couple of noticable core changes and the usual stream of
  cleanups and fixes:

   - move disable of unused regulators later in init so it comes after
     deferred probe has iterated making startup smoother.
   - fixes to reference counting of the DT nodes for constraints from
     Charles Keepax.  This has little practical impact since all real
     users of the regulator bindings use FDT which doesn't need the
     reference counting.
   - lots of cleanups, especially to the Samsung drivers.
   - support for Linear Technologies LTC3589, Texas Instruments
     TPS658640 and X-Powers AXP20x"

* tag 'regulator-v3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (64 commits)
  regulator: pbias: remove unnecessary OOM messages
  regulator: max8649: remove unnecessary OOM messages
  regulator: core: Fix the init of DT defined fixed regulators
  regulator: core: Disable unused regulators after deferred probing is done
  regulator: Don't disable unused regulators we don't have permission for
  regulator: axp20x: Use regulator_map_voltage_ascend for LDO4
  regulator: use of_property_read_{bool|u32}()
  regulator: Fix regulator_get_{optional,exclusive}() documentation
  regulators: Add definition of regulator_set_voltage_time() for !CONFIG_REGULATOR
  regulator: arizona-ldo1: add missing #include
  regulator: pfuze100: Support enable/disable for fixed regulator
  regulator: ltc3589: Remove ltc3589_list_voltage_fixed function
  regulator: ltc3589: Fix module dependency
  regulator: tps6586x: Remove unused to_tps6586x_dev() function
  regulator: tps65218: Convert to use regulator_set_voltage_time_sel
  regulator: tps6586x: Add support for the TPS658640
  regulator: tps6586x: Prepare supporting fixed regulators
  regulator: pfuze100: Don't allocate an invalid gpio
  regulator: pfuze100: Support SWB enable/disable
  regulator: fixed: use of_property_read_{bool|u32}()
  ...
2014-06-03 11:44:48 -07:00
Linus Torvalds a727eaf64f ARM: SoC driver changes
SoC-near driver changes that we're merging through our tree. Mostly
 because they depend on other changes we have staged, but in some cases
 because the driver maintainers preferred that we did it this way.
 
 This contains a largeish cleanup series of the omap_l3_noc bus driver,
 cpuidle rework for Exynos, some reset driver conversions and a long
 branch of TI EDMA fixes and cleanups, with more to come next release.
 
 The TI EDMA cleanups is a shared branch with the dmaengine tree, with
 a handful of Davinci-specific fixes on top.
 
 After discussion at last year's KS (and some more on the mailing lists),
 we are here adding a drivers/soc directory. The purpose of this is
 to keep per-vendor shared code that's needed by different drivers but
 that doesn't fit into the MFD (nor drivers/platform) model. We expect
 to keep merging contents for this hierarchy through arm-soc so we can
 keep an eye on what the vendors keep adding here and not making it a
 free-for-all to shove in crazy stuff.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTjOFiAAoJEIwa5zzehBx30RYP/0UE+R8ccdsodunmIDrmQ7QP
 qFWe1YTWlyXtGBDaPCNfdcU09UYatPKuCv5dJ2ToQCyyFI26PIIhFtnCNXmMuYz+
 XPCuqAlJ9hZWx7+j2hXRlyhoZMAaJ5EVVxaK5tnVYXDIfy1Y3xG7i069HD/qGrQp
 xrV+XofFmpU2VAds6S+SpecFFfYD7n/pJ1bTSgzPfaUsEUyV882dJ3skgs1VpTzQ
 PnL/0Z2t4ePoP3+6p+F7EnJxemLF5IXrlL0c7hODxQKuMqlzoUluywh6SwOHfCQL
 u2cc5SFUbbKhExwlGOVibdQMiC0HUOXyRvyYFOIdbv+xNH+Zc/tcoQQ22PWm4Yy1
 08qOm3Fr6yw5nH5IT+1wCIFCzJEC/ZHM5B2t+RISFybAMk6Bg1TDYJLmd570zkEL
 aTLtS5hdmy4h8Ad5FBtwKNyL//6FJJxhbHUu/m0qaE0phq94+78B2M6vbx6757xC
 kCFlpJsHoN0Tn5c9Q1hpTqI/BHxb4UR7Nf+b8Ox8Veuc9JrS35lzi/rWnGxB5WB0
 +1KCA8eih9KXTtksxAte1TmSbMciqW559RUR7dNAPXAMPksY2mJV1I+rg0cRsY3i
 F90Lnc6LWUM5PYpc4VwiC0sUCLKzTFnpZUELqMOiws3PUblbb0StXuoNo6owbtsK
 mp1Juxi1n7VhoN9AFVpL
 =SC+e
 -----END PGP SIGNATURE-----

Merge tag 'drivers-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next

Pull ARM SoC driver changes from Olof Johansson:
 "SoC-near driver changes that we're merging through our tree.  Mostly
  because they depend on other changes we have staged, but in some cases
  because the driver maintainers preferred that we did it this way.

  This contains a largeish cleanup series of the omap_l3_noc bus driver,
  cpuidle rework for Exynos, some reset driver conversions and a long
  branch of TI EDMA fixes and cleanups, with more to come next release.

  The TI EDMA cleanups is a shared branch with the dmaengine tree, with
  a handful of Davinci-specific fixes on top.

  After discussion at last year's KS (and some more on the mailing
  lists), we are here adding a drivers/soc directory.  The purpose of
  this is to keep per-vendor shared code that's needed by different
  drivers but that doesn't fit into the MFD (nor drivers/platform)
  model.  We expect to keep merging contents for this hierarchy through
  arm-soc so we can keep an eye on what the vendors keep adding here and
  not making it a free-for-all to shove in crazy stuff"

* tag 'drivers-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits)
  cpufreq: exynos: Fix driver compilation with ARCH_MULTIPLATFORM
  tty: serial: msm: Remove direct access to GSBI
  power: reset: keystone-reset: introduce keystone reset driver
  Documentation: dt: add bindings for keystone pll control controller
  Documentation: dt: add bindings for keystone reset driver
  soc: qcom: fix of_device_id table
  ARM: EXYNOS: Fix kernel panic when unplugging CPU1 on exynos
  ARM: EXYNOS: Move the driver to drivers/cpuidle directory
  ARM: EXYNOS: Cleanup all unneeded headers from cpuidle.c
  ARM: EXYNOS: Pass the AFTR callback to the platform_data
  ARM: EXYNOS: Move S5P_CHECK_SLEEP into pm.c
  ARM: EXYNOS: Move the power sequence call in the cpu_pm notifier
  ARM: EXYNOS: Move the AFTR state function into pm.c
  ARM: EXYNOS: Encapsulate the AFTR code into a function
  ARM: EXYNOS: Disable cpuidle for exynos5440
  ARM: EXYNOS: Encapsulate boot vector code into a function for cpuidle
  ARM: EXYNOS: Pass wakeup mask parameter to function for cpuidle
  ARM: EXYNOS: Remove ifdef for scu_enable in pm
  ARM: EXYNOS: Move scu_enable in the cpu_pm notifier
  ARM: EXYNOS: Use the cpu_pm notifier for pm
  ...
2014-06-02 16:35:49 -07:00
Linus Torvalds 825f4e0271 ARM: SoC updates for 3.16 (part 1)
A quite large set of SoC updates this cycle. In no particular order:
 
 - Multi-cluster power management for Samsung Exynos, adding support for
   big.LITTLE CPU switching on EXYNOS5
 - SMP support for Marvell Armada 375 and 38x
 - SMP rework on Allwinner A31
 - Xilinx Zynq support for SOC_BUS, big endian
 - Marvell orion5x platform cleanup, modernizing the implementation and
   moving to DT.
 - _Finally_ moving Samsung Exynos over to support MULTIPLATFORM, so
   that their platform can be enabled in the same kernel binary as most
   of the other v7 platforms in the tree. \o/ The work isn't quite complete,
   there's some driver fixes still needed, but the basics now work.
 
 New SoC support added:
 - Freescale i.MX6SX
 - LSI Axxia AXM55xx SoCs
 - Samsung EXYNOS 3250, 5260, 5410, 5420 and 5800
 - STi STIH407
 
 Plus a large set of various smaller updates for different platforms. I'm
 probably missing some important one here.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTjOKWAAoJEIwa5zzehBx36aEP/2vTD7x9FC59FACNHJ8iO7aw
 0ebTgBBjI1Np6X18O+M7URbxV5TaBgwpUm/NDN86p03MpQ2eOXr8r47qVxe/HhZs
 AdlTvzgE6QwxcVL/HeCKKUEN3BPH74+TZgFl9I5aSzNjpR39xETeK1aWP/ZiAl/q
 /lGRZAQ59+c7Ung00Hg0g2YDxH9WFpK50Nj90ROnyjKSFkhIYngXYVpZB3maOypq
 Pgib/U8IraKZ52oGJw3yinSoORr7FdcUdAGWGTz/lQdNL/jYDfQ6GkRW2oblWXdt
 3Xvj9UW6NmkbMICucMvFuuW1nXAgutZuTp9w7mBxsiUlYepxPv/DXM6yiI1WGlEb
 BeVOmOreNeN2nT6avv/uUhk3Osq63Jn9x8cz5y+7/lgWQwllh3/c+G01RotvgJEQ
 vpQq5ps9fMxIAMaNP6N/YqMJI1IOrBj0iXxaZEDw3VYM/k4lSvtb3VXP9c/rqApu
 U4i6hpSIGzrraU4NrjndYPndcLeNOVZbByETQKosZXuCo6G1sb7FstNSkzI9vSo8
 O/pujIVUfYyBW82GzZGDw+aa7DWA29FPeUQ3p+sj5MSCg051xXT8h6QwqMo2K/zY
 5ATs/qo6w7zH/Ou9rtHTRynCIb0GQJThDSlWtuXFedUF9quEltS+TDz/2o+dWtGJ
 yBFGKDRuBB20D36w9xqg
 =6LYI
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next

Pull part one of ARM SoC updates from Olof Johansson:
 "A quite large set of SoC updates this cycle.  In no particular order:

   - Multi-cluster power management for Samsung Exynos, adding support
     for big.LITTLE CPU switching on EXYNOS5

   - SMP support for Marvell Armada 375 and 38x

   - SMP rework on Allwinner A31

   - Xilinx Zynq support for SOC_BUS, big endian

   - Marvell orion5x platform cleanup, modernizing the implementation
     and moving to DT.

   - _Finally_ moving Samsung Exynos over to support MULTIPLATFORM, so
     that their platform can be enabled in the same kernel binary as
     most of the other v7 platforms in the tree.  \o/

     The work isn't quite complete, there's some driver fixes still
     needed, but the basics now work.

  New SoC support added:

   - Freescale i.MX6SX

   - LSI Axxia AXM55xx SoCs

   - Samsung EXYNOS 3250, 5260, 5410, 5420 and 5800

   - STi STIH407

  plus a large set of various smaller updates for different platforms.
  I'm probably missing some important one here"

* tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (281 commits)
  ARM: exynos: don't run exynos4 l2x0 setup on other platforms
  ARM: exynos: Fix "allmodconfig" build errors in mcpm and hotplug
  ARM: EXYNOS: mcpm rename the power_down_finish
  ARM: EXYNOS: Enable mcpm for dual-cluster exynos5800 SoC
  ARM: EXYNOS: Enable multi-platform build support
  ARM: EXYNOS: Consolidate Kconfig entries
  ARM: EXYNOS: Add support for EXYNOS5410 SoC
  ARM: EXYNOS: Support secondary CPU boot of Exynos3250
  ARM: EXYNOS: Add Exynos3250 SoC ID
  ARM: EXYNOS: Add 5800 SoC support
  ARM: EXYNOS: initial board support for exynos5260 SoC
  clk: exynos5410: register clocks using common clock framework
  ARM: debug: qcom: add UART addresses to Kconfig help for APQ8084
  ARM: sunxi: allow building without reset controller
  Documentation: devicetree: arm: sort enable-method entries
  ARM: rockchip: convert smp bringup to CPU_METHOD_OF_DECLARE
  clk: exynos5250: Add missing sysmmu clocks for DISP and ISP blocks
  ARM: dts: axxia: Add reset controller
  power: reset: Add Axxia system reset driver
  ARM: axxia: Adding defconfig for AXM55xx
  ...
2014-06-02 16:15:12 -07:00
Mark Brown 8ff15e0909 Merge remote-tracking branches 'regulator/topic/arizona', 'regulator/topic/axp20' and 'regulator/topic/bcm590xx' into regulator-next 2014-06-02 17:08:03 +01:00
Zhang Rui 9113e26076 power_supply: allow power supply devices registered w/o wakeup source
Currently, all the power supply devices are registered with wakeup source,
this results in that every power_supply_changed() invocation brings
the system out of suspend-to-freeze state.

This is overkill as some device drivers, e.g. ACPI battery driver,
have the ability to check the device status and wake up the system
from sleeping only when necessary.

Thus introduce a new API which allows device to be registered
w/o wakeup source.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-30 13:45:25 +02:00
Olof Johansson 535cee4227 Keystone Reset driver for 3.16
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJThJmIAAoJEHJsHOdBp5c/JrQP/2UjxYIKpG+JIegYAOgqrsSv
 faZ/NeWCBTwAKkMzS9Ffxp83MQdRIOoh1CuYY/1VXATGIozV25Kc8AErPxPbAwKm
 F7RbzcN3wJppW08vrbXsj6uCj3jPoHgy2Yq5LUz9pPZjigyLs4b+/TTbv1PII9ty
 2KYwHJhGMATUNrpb56YabrcFu28CC09bNxhkLp0Jyd9srJgxuzi7FT8mjOag9Z+a
 6MiXPkO+AtORgtfvto9qug0eON8xzI3pdZVzIrX2Ck6xFjof5aJT/1W+8ng6LyAE
 Or60qo2vjlFjf5uBfenJt6UbE5c7lruTm35usAMB/CwEwkPAIJ8QdVAyYGS5dyyb
 xRB7q/4ZC9v/cWYDlXwQSe5SX4Z+Lkqc4waBL+sFcoSh9dnfKlbbd+NLR7YZsG3K
 03ntrId2tLxRWKZfZuHCVG9fFApk2StpKpaIg/SCwsL0zVhBWHxTKf9axUZIdzwI
 rQMX1P2O/zHfaIJV8xdCowz0Bkmuz+M+z45UxeSd8wjkqFycUVWwVkkOQ76UOiLb
 +kaFf931XSkde4jxzPRFZaqaA/4Vbr+wa4M9PpmT1S3u7nhVZfLYKXV2vlpRsE+e
 WFvReUIO6jMjg+mThkomrUTPnutpHXenoSCdsxVnykDFQtqRtYeZlYPfY4+E/jOh
 swMRGOaEfrG7xfXm49k/
 =oaCh
 -----END PGP SIGNATURE-----

Merge tag 'keystone-reset-driver' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/drivers

Merge "Keystone Reset driver for 3.16" from Santosh Shilimkar:

* tag 'keystone-reset-driver' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  power: reset: keystone-reset: introduce keystone reset driver
  Documentation: dt: add bindings for keystone pll control controller
  Documentation: dt: add bindings for keystone reset driver

Signed-off-by: Olof Johansson <olof@lixom.net>
2014-05-27 11:09:56 -07:00
Ivan Khoronzhuk a3e01e8022 power: reset: keystone-reset: introduce keystone reset driver
The keystone SoC can be rebooted in several ways. By external reset
pin, by soft and by watchdogs. To allow keystone SoC reset if
watchdog is triggered we have to enable it in reset mux configuration
register regarding of watchdog configuration. Also we need to set
soft/hard reset we are going to use.

So add keystone reset driver to handle all this stuff.

Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2014-05-27 09:46:40 -04:00
Arnd Bergmann b3d491e85d Allwinner drivers changes for 3.16, take 2
Add reset driver for the A31
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTf5IpAAoJEBx+YmzsjxAgRqsP/1yv3EEH4AQNXagNEP/AyJzW
 qcHE52YaCEsmTzSvdTrdit/jjbYkvNdiJPFnDEsOsFwaE+fZHz+QZeUbhO4GIjLG
 3sf2CE5PvjjtoLoUWcYXn7WMQQ2zxZ2w8jWoPUiOCZ8VyIgGFPX4FMOnCk+ayKPw
 AqdaPxP5f6memDxeW8pLn34cmG7117rjv9eHUFmhquPyvmst/Pb2moD5V+F9m2Kf
 SyZwJjMJVZbAImvAiNRpVEWRw1dSByM6CIA3VAqQv6YngOfvlgKLK0BDlIBWeNuh
 lm3Jo7v/qTXXzjkP9xdurXZ35Di0DvC+hB5RJu4OP8koWQt3cYIHB1/Q8notYWKE
 YYLgtM9D5lKB1Hy9/UwMwcvvCpQZAyz2EYC0+Y7QdkrVIs9KbZDUaOCzFhQZHmmW
 PvbOC5xarjsaQwzFSvAuOM+J/K36vptv2LLFI1uepVESlmfC82IY9eawZ0LTWf8M
 Z3xrz8J2duUCvdnmNoNQ+6+ukGnmoLbFPxZDGms69rabOlHZEwQQOtyXWam2TE2f
 LKtgsjXjH6DF81bvvCXMSiI7r5piO5lmN3wnscGeUSCODusVJO/KvlZ+hz2oH6Uj
 ajzLhZ6I2nF+Se30k/tMYwxZjjIZXgpD/jcPfnaOuQ304lVay/s6KdW63P4nDFsn
 rMzDORgHHnTdcTmCDdH5
 =k3Rl
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-drivers-for-3.16-2' of https://github.com/mripard/linux into next/drivers

Allwinner drivers changes for 3.16, take 2

Add reset driver for the A31

* tag 'sunxi-drivers-for-3.16-2' of https://github.com/mripard/linux:
  power: reset: Add Allwinner A31 reset code

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-05-24 00:46:55 +02:00
Arnd Bergmann 650052b141 Merge branch 'axxia/soc' into next/soc
Patches from Anders Berg applied individually:

Here is version 4 of platform support for AXM5516 SoC.

The clk driver is now applied to clk-next. The rest should be ready for
arm-soc. Haven't got any response from the power/reset maintainers... I hope
this driver can be taken via arm-soc as well.

The AXM55xx family consists of devices that may contain up to 16 ARM Cortex-A15
cores (in a 4x4 cluster configuration). The cores within each cluster share an
L2 cache, and the clusters are connected to each other via a CCN-504 cache
coherent interconnect.

This machine requires CONFIG_ARM_LPAE enabled as all peripherals are located
above 4GB in the memory map.

* axxia/soc:
  ARM: dts: axxia: Add reset controller
  power: reset: Add Axxia system reset driver
  ARM: axxia: Adding defconfig for AXM55xx
  ARM: dts: Device tree for AXM55xx.
  ARM: Add platform support for LSI AXM55xx SoC

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-05-23 21:56:09 +02:00
Anders Berg 4a315e3457 power: reset: Add Axxia system reset driver
Add Axxia (AXM55xx) SoC system reset driver. This driver handles only system
reboot (and not power-off).

Signed-off-by: Anders Berg <anders.berg@lsi.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-05-23 18:18:45 +02:00
Maxime Ripard 1be7f5520a power: reset: Add Allwinner A31 reset code
That code used to be in the machine code, but it's more fit here with other
restart hooks.

That will allow to cleanup the machine directory, while waiting for a proper
watchdog driver for the A31.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-05-23 10:40:34 +02:00
Pawel Moll 3b9334ac83 mfd: vexpress: Convert custom func API to regmap
Components of the Versatile Express platform (configuration
microcontrollers on motherboard and daughterboards in particular)
talk to each other over a custom configuration bus. They
provide miscellaneous functions (from clock generator control
to energy sensors) which are represented as platform devices
(and Device Tree nodes). The transactions on the bus can
be generated by different "bridges" in the system, some
of which are universal for the whole platform (for the price
of high transfer latencies), others restricted to a subsystem
(but much faster).

Until now drivers for such functions were using custom "func"
API, which is being replaced in this patch by regmap calls.
This required:

* a rework (and move to drivers/bus directory, as suggested
  by Samuel and Arnd) of the config bus core, which is much
  simpler now and uses device model infrastructure (class)
  to keep track of the bridges; non-DT case (soon to be
  retired anyway) is simply covered by a special device
  registration function

* the new config-bus driver also takes over device population,
  so there is no need for special matching table for
  of_platform_populate nor "simple-bus" hack in the arm64
  model dtsi file (relevant bindings documentation has
  been updated); this allows all the vexpress devices
  fit into normal device model, making it possible
  to remove plenty of early inits and other hacks in
  the near future

* adaptation of the syscfg bridge implementation in the
  sysreg driver, again making it much simpler; there is
  a special case of the "energy" function spanning two
  registers, where they should be both defined in the tree
  now, but backward compatibility is maintained in the code

* modification of the relevant drivers:

  * hwmon - just a straight-forward API change
  * power/reset driver - API change
  * regulator - API change plus error handling
    simplification
  * osc clock driver - this one required larger rework
    in order to turn in into a standard platform driver

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Mark Brown <broonie@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mike Turquette <mturquette@linaro.org>
2014-05-15 17:02:18 +01:00
Pawel Moll d08b80373c power/reset: vexpress: Fix restart/power off operation
The restart/power off implementation in the vexpress driver
used to obtain the config function when necessary. This was
wrong in two respects:

1. It required memory allocation with disabled interrupts
(it worked, but lockdep - when enabled - reported warnings).

2. Used jiffies-based timeout, while jiffies are not running
at this stage of system shutdown (therefore a config
transaction error - if happened - would have never be reported).

Fixed by pre-allocating the config function per device
and using mdelay for timeout.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2014-04-24 17:20:50 +01:00
Doug Anderson c42ba72ec3 mfd: tps65090: Stop caching most registers
Nearly all of the registers in tps65090 combine control bits and
status bits.  Turn off caching of all registers except the select few
that can be cached.

In order to avoid adding more duplicate #defines, we also move some
register offset definitions to the mfd driver (and resolve
inconsistent names).

Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-04-23 12:32:19 +01:00
Arnd Bergmann cda88c8be5 mvebu driver changes for v3.15 (incremental pull #2)
- reset
     - re-use qnap-poweroff driver for Synology NASs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTGe0/AAoJEP45WPkGe8Znj34QALuuN/yvOykT1/qNg7fdk+C4
 Qrqcyi164KtIR1GnjaxYsDDBovreFRMLDBLhrUJnGwsS3u5TnrnGvan955GZxQ8e
 86YWlyxzJodbwrD+yK6bPNra1qArwpIQ4q5xUF/fksxMU/dLMiG2wPYQasQb9pMW
 yqm3MySNsTinave6QdiTxRzoYBwCcf1ey+mCFSkR9aLXWCFxMuK36/jHQpq7trlP
 21jB4cz8qF4eYsVNuyjadR0o4g2p2zM7RxGgZrHFHXESD2jiTrHmMv8cwlEjVMre
 0Pqv+BKI5obcMrWzCpVA2v/OUzvhMFrk0LShQVio7NQ5WUNEKPspQ3dogjnlkZKj
 6Xcc9OEYRjnAZ8i2q5g0xWoxsTLlAbDzTfmzQ03YRYtRTOxBXr20CTT2omGdJJ17
 RzCYvfc7JhGPyOjglsTibJt2plNKhQd5AzkzJFwOmF/tQkAM3LpVgjnqe/Q2Ts5L
 5BU7xQlpB2qHJgK48rRuVcpw9aIZJXtcA89oa2ebuWT6D7dJjp9W3J4WhaFzwWGy
 dxLU3WrYyiXaLoJURSHW1FaukRecubYZL9GW3Va9iN6rUn46FCVyn7RrCfHVMIXA
 Eiw4DAH2sOP7Z6Iw8NfVaU3b8ntT4vCCD3FjV3ZmWtUTsqgxBy5GdjKG9WtglAr6
 YhQ8SPTt8vSzVlzfZ4Ug
 =j/ZI
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-drivers-3.15-2' of git://git.infradead.org/linux-mvebu into next/drivers

Merge "mvebu drivers for v3.15" from Jason Cooper:

pull request #1:

 - mvebu mbus
    - use of_find_matching_node_and_match

 - rtc
    - use PTR_ERR_OR_ZERO in isl12057
    - work around issue in mv where date returned is 2038

 - kirkwood -> mach-mvebu
    - various Kconfig oneliners to allow building kirkwood in -mvebu/

pull request #2:

 - reset
    - re-use qnap-poweroff driver for Synology NASs

* tag 'mvebu-drivers-3.15-2' of git://git.infradead.org/linux-mvebu:
  Power: Reset: Generalize qnap-poweroff to work on Synology devices.
  drivers: Enable building of Kirkwood drivers for mach-mvebu
  rtc: mv: reset date if after year 2038
  rtc: isl12057: use PTR_ERR_OR_ZERO to fix coccinelle warnings
  bus: mvebu-mbus: make use of of_find_matching_node_and_match

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-03-17 11:14:34 +01:00
Andrew Lunn 200c0a3e40 Power: Reset: Generalize qnap-poweroff to work on Synology devices.
The Synology NAS devices use a very similar mechanism to QNAP NAS
devices to power off. Both send a single charactor command to a PIC,
over the second serial port. However the baud rate and the command
differ. Generalize the driver to support this.

Signed-off-by: Ben Peddell <klightspeed@killerwolves.net>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-03-04 03:48:41 +00:00
Arnd Bergmann 23453853e4 Merge tag 'qcom-drivers-for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into next/drivers
Merge "qcom driver changes for v3.15" from Kumar Gala:

We've split Qualcomm MSM support into legacy and multiplatform.  These
drivers are only relevant on the multiplatform supported SoCs so switch the
Kconfig depends to ARCH_QCOM.

* tag 'qcom-drivers-for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
  gpio: msm: switch Kconfig to ARCH_QCOM depends
  hwrng: msm: switch Kconfig to ARCH_QCOM depends
  power: reset: msm - switch Kconfig to ARCH_QCOM depends
  drm/msm: drop ARCH_MSM Kconfig depend
  tty: serial: msm: Enable building msm_serial for ARCH_QCOM
2014-02-25 18:10:57 +01:00
Linus Torvalds 0a33d88d07 Few fixes:
- Fix NULL pointer dereference in max17040 driver
 
 - Add bq2415x dts bindings documentation
 
 - Fix misleading comment in ds2782 driver
 
 - Remove useless check in isp1704 charger driver.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJS+8CkAAoJEBTbcu2+gGW44s8P/R7IJWteHikLi5pZ0nQBU9I7
 kzCt9dhVWxx6vqehpZTDVjfRNNGpj07sid0InFyiTkTcopnx8APu1MLTCgxTz2My
 tG7K1hT0/gqDJj0In2yKHS2f50OoAyuV7Njy48L3I6Hl+3HK/HBjm+Xb99NFJhIJ
 UJU/6sEPSp1av86gKpvMdZBqE1Qiu3wEyro/nSdmHPzOpqZGX+1xxYo/FxYkOZX/
 dkYTARyH9cffBvauqCvBKiCqmxF6EBbL9iScPE5xxR3QWrwj26bzowU+C/gVnXMR
 OdYaW0gKGuMfzxsLV7UW2N+Hsdb0Mz7FDBd9EuzbY8gG33uvWenpwh2JJBn0zgzu
 YYqkRvRE190jYzyoeTqnXcNEu0+rTfqO+OWzubqfqsbnzV3kzNBzCbfgC5QDMW+s
 HNCqcHA+VmETpRvLcrzyS+iIn7D0WTYnOoa4DwtAxvTIdc2DfA4m4AmJ4MZfKu8X
 Z/RkSCF4DR9T4a7GvkEv468QX6j7Z7Xuf2NRAUFX73Qeu3wuuIiXAxE8fAnRNmao
 8nXT6WY6mAtsq987Vhgc7sxIS7bIUpIfsEqRezHlX0+bXGDoSMXL6wVrGij+kYtp
 9/B0tqDpa+GRilmC+EqkmXOp62W7tU3WbLZkReqhdko/T41Rz7adrJCFndQHMc1E
 ExMLpwiIXTB5LNX9PxhU
 =G49N
 -----END PGP SIGNATURE-----

Merge tag 'for-v3.14-fixes' of git://git.infradead.org/battery-2.6

Pull battery fixes from Dmitry Eremin-Solenikov:

 - Fix NULL pointer dereference in max17040 driver

 - Add bq2415x dts bindings documentation

 - Fix misleading comment in ds2782 driver

 - Remove useless check in isp1704 charger driver.

* tag 'for-v3.14-fixes' of git://git.infradead.org/battery-2.6:
  power: max17040: Fix NULL pointer dereference when there is no platform_data
  dt: binding documentation for bq2415x charger
  isp1704_charger: remove useless check in isp1704_charger_probe()
  power: ds2782_battery: Typo in comment
2014-02-14 10:32:28 -08:00
Kumar Gala d118966c58 power: reset: msm - switch Kconfig to ARCH_QCOM depends
We've split Qualcomm MSM support into legacy and multiplatform.  The reset
driver is only relevant on the multiplatform supported SoCs so switch the
Kconfig depends to ARCH_QCOM.

Acked-by: Dmitry Eremin-Solenikov
Signed-off-by: Kumar Gala <galak@codeaurora.org>
2014-02-12 11:19:58 -06:00
Krzysztof Kozlowski ac323d8d80 power: max17040: Fix NULL pointer dereference when there is no platform_data
Fix NULL pointer dereference of "chip->pdata" if platform_data was not
supplied to the driver.

The driver during probe stored the pointer to the platform_data:
	chip->pdata = client->dev.platform_data;
Later it was dereferenced in max17040_get_online() and
max17040_get_status().

If platform_data was not supplied, the NULL pointer exception would
happen:

[    6.626094] Unable to handle kernel  of a at virtual address 00000000
[    6.628557] pgd = c0004000
[    6.632868] [00000000] *pgd=66262564
[    6.634636] Unable to handle kernel paging request at virtual address e6262000
[    6.642014] pgd = de468000
[    6.644700] [e6262000] *pgd=00000000
[    6.648265] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[    6.653552] Modules linked in:
[    6.656598] CPU: 0 PID: 31 Comm: kworker/0:1 Not tainted 3.10.14-02717-gc58b4b4 #505
[    6.664334] Workqueue: events max17040_work
[    6.668488] task: dfa11b80 ti: df9f6000 task.ti: df9f6000
[    6.673873] PC is at show_pte+0x80/0xb8
[    6.677687] LR is at show_pte+0x3c/0xb8
[    6.681503] pc : [<c001b7b8>]    lr : [<c001b774>]    psr: 600f0113
[    6.681503] sp : df9f7d58  ip : 600f0113  fp : 00000009
[    6.692965] r10: 00000000  r9 : 00000000  r8 : dfa11b80
[    6.698171] r7 : df9f7ea0  r6 : e6262000  r5 : 00000000  r4 : 00000000
[    6.704680] r3 : 00000000  r2 : e6262000  r1 : 600f0193  r0 : c05b3750
[    6.711194] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
[    6.718485] Control: 10c53c7d  Table: 5e46806a  DAC: 00000015
[    6.724218] Process kworker/0:1 (pid: 31, stack limit = 0xdf9f6238)
[    6.730465] Stack: (0xdf9f7d58 to 0xdf9f8000)
[    6.914325] [<c001b7b8>] (show_pte+0x80/0xb8) from [<c047107c>] (__do_kernel_fault.part.9+0x44/0x74)
[    6.923425] [<c047107c>] (__do_kernel_fault.part.9+0x44/0x74) from [<c001bb7c>] (do_page_fault+0x2c4/0x360)
[    6.933144] [<c001bb7c>] (do_page_fault+0x2c4/0x360) from [<c0008400>] (do_DataAbort+0x34/0x9c)
[    6.941825] [<c0008400>] (do_DataAbort+0x34/0x9c) from [<c000e5d8>] (__dabt_svc+0x38/0x60)
[    6.950058] Exception stack(0xdf9f7ea0 to 0xdf9f7ee8)
[    6.955099] 7ea0: df0c1790 00000000 00000002 00000000 df0c1794 df0c1790 df0c1790 00000042
[    6.963271] 7ec0: df0c1794 00000001 00000000 00000009 00000000 df9f7ee8 c0306268 c0306270
[    6.971419] 7ee0: a00f0113 ffffffff
[    6.974902] [<c000e5d8>] (__dabt_svc+0x38/0x60) from [<c0306270>] (max17040_work+0x8c/0x144)
[    6.983317] [<c0306270>] (max17040_work+0x8c/0x144) from [<c003f364>] (process_one_work+0x138/0x440)
[    6.992429] [<c003f364>] (process_one_work+0x138/0x440) from [<c003fa64>] (worker_thread+0x134/0x3b8)
[    7.001628] [<c003fa64>] (worker_thread+0x134/0x3b8) from [<c00454bc>] (kthread+0xa4/0xb0)
[    7.009875] [<c00454bc>] (kthread+0xa4/0xb0) from [<c000eb28>] (ret_from_fork+0x14/0x2c)
[    7.017943] Code: e1a03005 e2422480 e0826104 e59f002c (e7922104)
[    7.024017] ---[ end trace 73bc7006b9cc5c79 ]---

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Fixes: c6f4a42de6
Cc: <stable@vger.kernel.org>
2014-02-01 20:11:32 +04:00
Linus Torvalds 4ba9920e5e Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) BPF debugger and asm tool by Daniel Borkmann.

 2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann.

 3) Correct reciprocal_divide and update users, from Hannes Frederic
    Sowa and Daniel Borkmann.

 4) Currently we only have a "set" operation for the hw timestamp socket
    ioctl, add a "get" operation to match.  From Ben Hutchings.

 5) Add better trace events for debugging driver datapath problems, also
    from Ben Hutchings.

 6) Implement auto corking in TCP, from Eric Dumazet.  Basically, if we
    have a small send and a previous packet is already in the qdisc or
    device queue, defer until TX completion or we get more data.

 7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko.

 8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel
    Borkmann.

 9) Share IP header compression code between Bluetooth and IEEE802154
    layers, from Jukka Rissanen.

10) Fix ipv6 router reachability probing, from Jiri Benc.

11) Allow packets to be captured on macvtap devices, from Vlad Yasevich.

12) Support tunneling in GRO layer, from Jerry Chu.

13) Allow bonding to be configured fully using netlink, from Scott
    Feldman.

14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can
    already get the TCI.  From Atzm Watanabe.

15) New "Heavy Hitter" qdisc, from Terry Lam.

16) Significantly improve the IPSEC support in pktgen, from Fan Du.

17) Allow ipv4 tunnels to cache routes, just like sockets.  From Tom
    Herbert.

18) Add Proportional Integral Enhanced packet scheduler, from Vijay
    Subramanian.

19) Allow openvswitch to mmap'd netlink, from Thomas Graf.

20) Key TCP metrics blobs also by source address, not just destination
    address.  From Christoph Paasch.

21) Support 10G in generic phylib.  From Andy Fleming.

22) Try to short-circuit GRO flow compares using device provided RX
    hash, if provided.  From Tom Herbert.

The wireless and netfilter folks have been busy little bees too.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits)
  net/cxgb4: Fix referencing freed adapter
  ipv6: reallocate addrconf router for ipv6 address when lo device up
  fib_frontend: fix possible NULL pointer dereference
  rtnetlink: remove IFLA_BOND_SLAVE definition
  rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info
  qlcnic: update version to 5.3.55
  qlcnic: Enhance logic to calculate msix vectors.
  qlcnic: Refactor interrupt coalescing code for all adapters.
  qlcnic: Update poll controller code path
  qlcnic: Interrupt code cleanup
  qlcnic: Enhance Tx timeout debugging.
  qlcnic: Use bool for rx_mac_learn.
  bonding: fix u64 division
  rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC
  sfc: Use the correct maximum TX DMA ring size for SFC9100
  Add Shradha Shah as the sfc driver maintainer.
  net/vxlan: Share RX skb de-marking and checksum checks with ovs
  tulip: cleanup by using ARRAY_SIZE()
  ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called
  net/cxgb4: Don't retrieve stats during recovery
  ...
2014-01-25 11:17:34 -08:00
Wei Yongjun 4fa99230ea isp1704_charger: remove useless check in isp1704_charger_probe()
Neither devm_usb_get_phy_by_phandle() nor devm_usb_get_phy() can
return a NULL result, so remove the useless !isp->phy check.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
2014-01-25 15:24:15 +04:00
Matthias Brugger 1b5e1c6e6e power: ds2782_battery: Typo in comment
Change missleading comment to actual shift value provided by the chip.

Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2014-01-25 15:24:15 +04:00
Richard Weinberger 850bc4d539 power,goldfish: Add dependency on HAS_IOMEM
On archs like S390 or um this driver cannot build nor work.
Make it depend on HAS_IOMEM to bypass build failures.

drivers/built-in.o: In function `goldfish_battery_probe':
drivers/power/goldfish_battery.c:181: undefined reference to `devm_ioremap'

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15 14:51:22 -08:00
Jonghwa Lee 26740dbb50 max17042_battery: Add IRQF_ONESHOT flag to use default irq handler
This patch adds IRQF_ONESHOT flag to max17042's irq since it uses primary
default handler. Without this flag, requesting irq will be denied with
returning error.

Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-23 18:59:41 -08:00
Dmitry Eremin-Solenikov 4ea8126601 gpio-charger: Support wakeup events
Add support for using gpio-charger IRQ as a wakeup event.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-23 18:54:03 -08:00
Krzysztof Kozlowski 55e6470120 power_supply: Add charger support for Maxim 14577
MAX14577 chip is a multi-function device which includes MUIC, charger and
voltage regulator. The driver is located in drivers/mfd.

This patch supports battery charging control of MAX14577 chip and provides
power supply class information to userspace.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-23 18:52:19 -08:00
Sebastian Reichel 34a109610e isp1704_charger: Add DT support
This patch introduces device tree support to the isp1704 charger driver.
Adding support involved moving the handling of the enable GPIO from board
code into the driver.

Signed-off-by: Sebastian Reichel <sre@debian.org>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-23 18:34:58 -08:00
Anton Vorontsov 434a09f9c4 charger-manager: of_cm_parse_desc() should be static
Fixes the following warning:

drivers/power/charger-manager.c:1539:21: warning: symbol
'of_cm_parse_desc' was not declared. Should it be static?

Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-23 18:21:35 -08:00
Sebastian Reichel faffd234cf bq2415x_charger: Add DT support
This adds DT support to the bq2415x driver.

Signed-off-by: Sebastian Reichel <sre@debian.org>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-23 18:21:32 -08:00
Sebastian Reichel abce97708a power_supply: Add power_supply_get_by_phandle
Add method to get power supply by device tree phandle.

Signed-off-by: Sebastian Reichel <sre@debian.org>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-23 18:21:11 -08:00
Pali Rohár 32260308b4 bq2415x_charger: Use power_supply notifier for automode
This patch removing set_mode_hook function from board data and replacing
it with new string variable of notifier power supply device. After this
change it is possible to add DT support because driver does not need
specific board function anymore. Only static data and name of power supply
device is required.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-23 17:58:03 -08:00
Laxman Dewangan 56fb8de53e power: reset: Add as3722 power-off driver
ams AS3722 supports the power off functionality to turn off system.

This commit adds power off driver for ams AS3722.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-23 17:20:37 -08:00
Jonghwa Lee 856ee6115e charger-manager: Support deivce tree in charger manager driver
Charger-manager can parse charger_desc data from devicetree which is used
to register charger manager.

Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-23 17:10:07 -08:00
Jonghwa Lee 5c49a6256b charger-manager: Modify the way of checking battery's temperature
Charger-manager driver used to check battery temperature through the
callback function passed by platform data. Unfortunatley, without that
pre-defined callback function, charger-manager can't get battery's
temperature at all. Also passing callback function through platform data
ruins DT support for charger-manager.

This patch mondifies charger-manager driver to get temperature of battery
without pre-defined callback function. Now, charger-manager can use either
of battery thermometer in fuel-gauge and ouside of battery. It uses
thermal framework interface for outer thermometer if thermal fw is
enabled. Otherwise, it tries to use fuel-gauge's through the power supply
interface.

Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-23 17:09:09 -08:00
Pali Rohár d36240d260 power_supply: Add power_supply notifier
This patch adds a notifier chain to the power_supply, this helps drivers
in other subsystem to listen to changes in power supply subsystem.

This would help to take some actions in those drivers on changing the
power supply properties. One such scenario is to increase/decrease system
performance based on the battery capacity/voltage. Another scenario is to
adjust the h/w peak current detection voltage/current thresholds based on
battery voltage/capacity. The notifier helps drivers to listen to changes
in power_suppy susbystem without polling the power_supply properties

Signed-off-by: Jenny TC <jenny.tc@intel.com>
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Jenny TC <jenny.tc@intel.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-01 14:27:24 -08:00
Austin Boyle 93353e8088 max17042_battery: Fix build errors caused by missing REGMAP_I2C config
max17042 now uses regmap interface but does not enable config option. This
patch fixes the following build errors:

drivers/power/max17042_battery.c:661:15: error: variable ‘max17042_regmap_config’ has initializer but incomplete type
drivers/power/max17042_battery.c:662:2: error: unknown field ‘reg_bits’ specified in initializer
drivers/power/max17042_battery.c:662:2: warning: excess elements in struct initializer
drivers/power/max17042_battery.c:662:2: warning: (near initialization for ‘max17042_regmap_config’)
drivers/power/max17042_battery.c:663:2: error: unknown field ‘val_bits’ specified in initializer
drivers/power/max17042_battery.c:663:2: warning: excess elements in struct initializer
drivers/power/max17042_battery.c:663:2: warning: (near initialization for ‘max17042_regmap_config’)
drivers/power/max17042_battery.c:664:2: error: unknown field ‘val_format_endian’ specified in initializer
drivers/power/max17042_battery.c:664:23: error: ‘REGMAP_ENDIAN_NATIVE’ undeclared here (not in a function)
drivers/power/max17042_battery.c:664:2: warning: excess elements in struct initializer
drivers/power/max17042_battery.c:664:2: warning: (near initialization for ‘max17042_regmap_config’)
drivers/power/max17042_battery.c: In function ‘max17042_probe’:
drivers/power/max17042_battery.c:684:2: error: implicit declaration of function ‘devm_regmap_init_i2c’

Signed-off-by: Austin Boyle <boyle.austin@gmail.com>
Acked-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-01 14:25:03 -08:00
Shuah Khan 80c6463e2f power_supply: Fix Oops from NULL pointer dereference from wakeup_source_activate
power_supply_register() calls device_init_wakeup() to register a wakeup
source before initializing dev_name. As a result, device_wakeup_enable()
end up registering wakeup source with a null name when
wakeup_source_register() gets called with dev_name(dev) which is null at
the time.

When kernel is booted with wakeup_source_activate enabled, it will panic
when the trace point code tries to dereference ws->name.

Fixed the problem by moving up the kobject_set_name() call prior to
accesses to dev_name(). Replaced kobject_set_name() with dev_set_name()
which is the right interface to be called from drivers. Fixed the call to
device_del() prior to device_add() in for wakeup_init_failed error
handling code.

Trace after the change:

            bash-2143  [003] d...   132.280697: wakeup_source_activate: BAT1 state=0x20001
     kworker/3:2-1169  [003] d...   132.281305: wakeup_source_deactivate: BAT1 state=0x30000

Oops message:

[  819.769934] device: 'BAT1': device_add
[  819.770078] PM: Adding info for No Bus:BAT1
[  819.770235] BUG: unable to handle kernel NULL pointer dereference at           (null)
[  819.770435] IP: [<ffffffff813381c0>] skip_spaces+0x30/0x30
[  819.770572] PGD 3efd90067 PUD 3eff61067 PMD 0
[  819.770716] Oops: 0000 [#1] SMP
[  819.770829] Modules linked in: arc4 iwldvm mac80211 x86_pkg_temp_thermal coretemp kvm_intel joydev i915 kvm uvcvideo ghash_clmulni_intel videobuf2_vmalloc aesni_intel videobuf2_memops videobuf2_core aes_x86_64 ablk_helper cryptd videodev iwlwifi lrw rfcomm gf128mul glue_helper bnep btusb media bluetooth parport_pc hid_generic ppdev snd_hda_codec_hdmi drm_kms_helper snd_hda_codec_realtek cfg80211 drm tpm_infineon samsung_laptop snd_hda_intel usbhid snd_hda_codec hid snd_hwdep snd_pcm microcode snd_page_alloc snd_timer psmouse i2c_algo_bit lpc_ich tpm_tis video wmi mac_hid serio_raw ext2 lp parport r8169 mii
[  819.771802] CPU: 0 PID: 2167 Comm: bash Not tainted 3.12.0+ #25
[  819.771876] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 900X3C/900X3D/900X4C/900X4D/SAMSUNG_NP1234567890, BIOS P03AAC 07/12/2012
[  819.772022] task: ffff88002e6ddcc0 ti: ffff8804015ca000 task.ti: ffff8804015ca000
[  819.772119] RIP: 0010:[<ffffffff813381c0>]  [<ffffffff813381c0>] skip_spaces+0x30/0x30
[  819.772242] RSP: 0018:ffff8804015cbc70  EFLAGS: 00010046
[  819.772310] RAX: 0000000000000003 RBX: ffff88040cfd6d40 RCX: 0000000000000018
[  819.772397] RDX: 0000000000020001 RSI: 0000000000000000 RDI: 0000000000000000
[  819.772484] RBP: ffff8804015cbcc0 R08: 0000000000000000 R09: ffff8803f0768d40
[  819.772570] R10: ffffea001033b800 R11: 0000000000000000 R12: ffffffff81c519c0
[  819.772656] R13: 0000000000020001 R14: 0000000000000000 R15: 0000000000020001
[  819.772744] FS:  00007ff98309b740(0000) GS:ffff88041f200000(0000) knlGS:0000000000000000
[  819.772845] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  819.772917] CR2: 0000000000000000 CR3: 00000003f59dc000 CR4: 00000000001407f0
[  819.773001] Stack:
[  819.773030]  ffffffff81114003 ffff8804015cbcb0 0000000000000000 0000000000000046
[  819.773146]  ffff880409757a18 ffff8803f065a160 0000000000000000 0000000000020001
[  819.773273]  0000000000000000 0000000000000000 ffff8804015cbce8 ffffffff8143e388
[  819.773387] Call Trace:
[  819.773434]  [<ffffffff81114003>] ? ftrace_raw_event_wakeup_source+0x43/0xe0
[  819.773520]  [<ffffffff8143e388>] wakeup_source_report_event+0xb8/0xd0
[  819.773595]  [<ffffffff8143e3cd>] __pm_stay_awake+0x2d/0x50
[  819.773724]  [<ffffffff8153395c>] power_supply_changed+0x3c/0x90
[  819.773795]  [<ffffffff8153407c>] power_supply_register+0x18c/0x250
[  819.773869]  [<ffffffff813d8d18>] sysfs_add_battery+0x61/0x7b
[  819.773935]  [<ffffffff813d8d69>] battery_notify+0x37/0x3f
[  819.774001]  [<ffffffff816ccb7c>] notifier_call_chain+0x4c/0x70
[  819.774071]  [<ffffffff81073ded>] __blocking_notifier_call_chain+0x4d/0x70
[  819.774149]  [<ffffffff81073e26>] blocking_notifier_call_chain+0x16/0x20
[  819.774227]  [<ffffffff8109397a>] pm_notifier_call_chain+0x1a/0x40
[  819.774316]  [<ffffffff81095b66>] hibernate+0x66/0x1c0
[  819.774407]  [<ffffffff81093931>] state_store+0x71/0xa0
[  819.774507]  [<ffffffff81331d8f>] kobj_attr_store+0xf/0x20
[  819.774613]  [<ffffffff811f8618>] sysfs_write_file+0x128/0x1c0
[  819.774735]  [<ffffffff8118579d>] vfs_write+0xbd/0x1e0
[  819.774841]  [<ffffffff811861d9>] SyS_write+0x49/0xa0
[  819.774939]  [<ffffffff816d1052>] system_call_fastpath+0x16/0x1b
[  819.775055] Code: 89 f8 48 89 e5 f6 82 c0 a6 84 81 20 74 15 0f 1f 44 00 00 48 83 c0 01 0f b6 10 f6 82 c0 a6 84 81 20 75 f0 5d c3 66 0f 1f 44 00 00 <80> 3f 00 55 48 89 e5 74 15 48 89 f8 0f 1f 40 00 48 83 c0 01 80
[  819.775760] RIP  [<ffffffff813381c0>] skip_spaces+0x30/0x30
[  819.775881]  RSP <ffff8804015cbc70>
[  819.775949] CR2: 0000000000000000
[  819.794175] ---[ end trace c4ef25127039952e ]---

Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Acked-by: Anton Vorontsov <anton@enomsg.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-12-01 13:41:31 -08:00
Linus Torvalds a709bd585f Highlights:
- A new driver for TI BQ24735 Battery Chargers, courtesy of NVidia.
 
 - Device tree bindings for TWL4030 chips.
 
 - Random fixes and cleanups.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJSiXSwAAoJEGgI9fZJve1bJBgQAJKXIYXqZG5AwCqtFXltN0S5
 qYmxiaxUekQyesBxRNNb6LwgWEBUF+lQtmfhDpSaHwi6aRc7pmSQaVw6tfD1dpBe
 bAEHrWu1YD8v6rwhrhB91kv9F81ea06pfUtyUAwDpbchGq/VaN/tsUT4uO5E/AIT
 K7tWZzjmGyQ79186HUnDxmgb0lA1PPDypsuv/pP1KgrioKNPHskDqhLeS2YuCe6J
 WUHiGb3cDB8Tu2+Af5OIxXio5J74486KvjlH1K9+ziixUrU0P380D26JshklgIsG
 qWc1hu9DSO+r76N7HV0EzbpJNqZNEFJiXaXSozgA/yRtJy+ISEIVXJE9oDwW7SxH
 thLveZTck6VQ6CyggAh2nn9KPVrpFYUcy+HFshpM7V4xugjcAe9Bq9i5cWwJHvn9
 Xy4G2s2MS81PFdKEGc9JjSwvXULTRTMAe5gMMfwAqnn+Xuf2+KSCtTlOnPkON/sa
 cNraBFTSVi33yCEHS9BO7BKbb5ikPNtAaAB+4VszwMQbUysPld7WvEpEOIUOaoJO
 EYgsM1VOLV0cYO5Qwu9Yxplrjmz/l+kNxAgtCW21SV14DjUbnV9ZuhL5Gx4jbLyY
 T1uiREtzpTUGoKhZHqWHKXtoEUW+d48nkDXbO+IbKmKPTF6bn0TuZmW0sNU/ZHb8
 yNJPZKinHfUE6heJCX2X
 =rT+j
 -----END PGP SIGNATURE-----

Merge tag 'for-v3.13' of git://git.infradead.org/battery-2.6

Pull battery updates from Anton Vorontsov:
 "Highlights:
   - A new driver for TI BQ24735 Battery Chargers, courtesy of NVidia.
   - Device tree bindings for TWL4030 chips.
   - Random fixes and cleanups"

* tag 'for-v3.13' of git://git.infradead.org/battery-2.6:
  pm2301-charger: Remove unneeded NULL checks
  twl4030_charger: Add devicetree support
  power_supply: Fix documentation for TEMP_*ALERT* properties
  max17042_battery: Support regmap to access device's registers
  max17042_battery: Use SIMPLE_DEV_PM_OPS
  charger-manager : Replace kzalloc to devm_kzalloc and remove uneccessary code
  bq2415x_charger: Fix max battery regulation voltage
  tps65090-charger: Use "IS_ENABLED(CONFIG_OF)" for DT code
  tps65090-charger: Drop devm_free_irq of devm_ allocated irq
  power_supply: Add support for bq24735 charger
  pm2301-charger: Staticize pm2xxx_charger_die_therm_mngt
  pm2301-charger: Check return value of regulator_enable
  ab8500-charger: Remove redundant break
  ab8500-charger: Check return value of regulator_enable
  isp1704_charger: Fix driver to work with changes introduced in v3.5
2013-11-18 15:35:09 -08:00
Wolfram Sang 16735d022f tree-wide: use reinit_completion instead of INIT_COMPLETION
Use this new function to make code more comprehensible, since we are
reinitialzing the completion, not initializing.

[akpm@linux-foundation.org: linux-next resyncs]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-15 09:32:21 +09:00
Dan Carpenter c8024234c2 pm2301-charger: Remove unneeded NULL checks
If "pm2" were NULL we would oops printing the error message.
Fortunately, that's not possible so I have removed the NULL checks.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-11-12 22:36:34 -08:00
NeilBrown ec0b380245 twl4030_charger: Add devicetree support
This allows the charger to be enabled with devicetree, and allows the
parameters for charging the backup battery to be set.

Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Kumar Gala <galak@codeaurora.org>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-11-12 22:35:45 -08:00
Jonghwa Lee 39e7213edc max17042_battery: Support regmap to access device's registers
This patch makes max17042 fuelguage driver uses regmap API to access its
device's registers.

Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-10-25 16:54:33 -07:00
Manish Badarkhe 3d23c7f457 max17042_battery: Use SIMPLE_DEV_PM_OPS
Use the SIMPLE_DEV_PM_OPS macro to declare the driver's pm_ops.

Signed-off-by: Manish Badarkhe <badarkhe.manish@gmail.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-10-25 16:48:30 -07:00
Jonghwa Lee 883c10a9dd charger-manager : Replace kzalloc to devm_kzalloc and remove uneccessary code
Use devm function for dynamic memory allocation.

Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-10-25 16:28:54 -07:00
Alexandre Belloni 3ed5cd79b8 bq2415x_charger: Fix max battery regulation voltage
As per the datasheets, maximum battery regulation voltage is 4440mV.

The formula is (voltage - offset) / step, so the maximum value is:
(4440 - 3500) / 20 = 47

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Thanks-to: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-10-25 16:24:22 -07:00
Manish Badarkhe e47bcba4a1 tps65090-charger: Use "IS_ENABLED(CONFIG_OF)" for DT code
Instead of "#if defined(CONFIG_OF)" use "IS_ENABLED(CONFIG_OF)" option
for DT code to avoid if-deffery in code.

Also, arranged header files in alphabetically.

Signed-off-by: Manish Badarkhe <badarkhe.manish@gmail.com>
Acked-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-10-25 16:07:07 -07:00
Wei Yongjun 0ed8139323 tps65090-charger: Drop devm_free_irq of devm_ allocated irq
The devm_request_irq function allocates irq that is released when a driver
detaches. Thus, there is no reason to explicitly call devm_free_irq in
probe or remove functions.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-10-25 16:06:10 -07:00
Darbha Sriharsha ce77399226 power_supply: Add support for bq24735 charger
Adds support for the bq24735 charger chipset. The bq24735 is a
high-efficiency, synchronous battery charger.

It allows control of the charging current, input current, and the charger
voltage DAC's through SMBus.

Signed-off-by: Darbha Sriharsha <dsriharsha@nvidia.com>
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Thanks-to: Stephen Warren <swarren@wwwdotorg.org>
Thanks-to: Thierry Reding <thierry.reding@gmail.com>
Thanks-to: Manish Badarkhe <badarkhe.manish@gmail.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-10-25 15:56:51 -07:00