The style of the comments is not uniform, make it so and fix
a few grammar issues. While at it, update Copyright years.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220801113734.36131-4-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Make terminator entry uniform by dropping:
- trailing commas
- anything inside curly braces
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220801113734.36131-3-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Not everyone can get what "critclks" means in the message, improve
it to make less cryptic.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220801113734.36131-2-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On Intel hardware the SLP_TYPx bitfield occupies bits 10-12 as per ACPI
specification (see Table 4.13 "PM1 Control Registers Fixed Hardware
Feature Control Bits" for the details).
Fix the mask and other related definitions accordingly.
Fixes: 93e5eadd1f ("x86/platform: New Intel Atom SOC power management controller driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220801113734.36131-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The driver core supports the ability to handle the creation and removal
of device-specific sysfs files in a race-free manner. Take advantage of
that by converting this driver to use this by moving the sysfs
attributes into a group and assigning the dev_groups pointer to it.
Cc: Perry Yuan <Perry.Yuan@dell.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: Dell.Client.Kernel@dell.com
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220729115302.2258296-1-gregkh@linuxfoundation.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
variable 'mode' is used uninitialized whenever switch default is taken
in sps.c which leads to the following clang warning.
drivers/platform/x86/amd/pmf/sps.c:96:2: error: variable 'mode' is used uninitialized whenever switch default is taken [-Werror,-Wsometimes-uninitialized]
default:
^~~~~~~
drivers/platform/x86/amd/pmf/sps.c:101:9: note: uninitialized use occurs here
return mode;
^~~~
drivers/platform/x86/amd/pmf/sps.c:84:9: note: initialize the variable 'mode' to silence this warning
u8 mode;
^
= '\0'
1 error generated.
Fix it by returning -EOPNOTSUPP in default case and also change the return
type of the function amd_pmf_get_pprof_modes() to keep it similar like
other drivers which implement platform_profile.
Fixes: 4c71ae4144 ("platform/x86/amd/pmf: Add support SPS PMF feature")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220822062917.4061503-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Its reported that amd-pmf driver when built with config which does not
have ACPI_PLATFORM_PROFILE set/enabled throws a undefined references to
symbols used.
ld: vmlinux.o: in function `amd_pmf_init_sps':
drivers/platform/x86/amd/pmf/sps.c:132: undefined reference to `platform_profile_register'
ld: vmlinux.o: in function `amd_pmf_deinit_sps':
drivers/platform/x86/amd/pmf/sps.c:142: undefined reference to `platform_profile_remove'
Fix it by adding a "select" to the Kconfig.
Fixes: da5ce22df5 ("platform/x86/amd/pmf: Add support for PMF core layer")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20220819083858.3987590-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In modern Chromebooks, the embedded controller has a mechanism where
it will watch a hardware-controlled line that toggles in suspend, and
wake the system up if an expected sleep transition didn't occur. This
can be very useful for detecting power management issues where the
system appears to suspend, but doesn't actually reach its lowest
expected power states.
Sometimes it's useful in debug and test scenarios to be able to control
the duration of that timeout, or even disable the EC timeout mechanism
altogether. Add a debugfs control to set the timeout to values other
than the EC-defined default, for more convenient debug and
development iteration.
Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220822144026.v3.1.Idd188ff3f9caddebc17ac357a13005f93333c21f@changeid
[tzungbi: fix one nit in Documentation/ABI/testing/debugfs-cros-ec.]
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
If "s_mem.bytes" is larger than the buffer size it leads to memory
corruption.
Fixes: eda2e30c66 ("mfd / platform: cros_ec: Miscellaneous character device to talk with the EC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/Yv8dpCFZJdbUT5ye@kili
If chromeos_laptop_prepare_i2c_peripherals() fails after allocating memory
for 'cros_laptop->i2c_peripherals', this memory is freed at 'err_out' label
and nonzero value is returned. Then chromeos_laptop_destroy() is called,
resulting in double-free error.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Rustam Subkhankulov <subkhankulov@ispras.ru>
Fixes: 5020cd29d8 ("platform/chrome: chromeos_laptop - supply properties for ACPI devices")
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220813220843.2373004-1-subkhankulov@ispras.ru
The only significant core change is ASoC DPCM fix for asymmetric
setup; other remaining changes are device-specific fixes, including
the hardening of string manipulations.
One change in platform/x86 is the patch I forgot to apply from a
series for CS35L41 codec.
-----BEGIN PGP SIGNATURE-----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=seOs
-----END PGP SIGNATURE-----
Merge tag 'sound-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The only significant core change is ASoC DPCM fix for asymmetric
setup; other remaining changes are device-specific fixes, including
the hardening of string manipulations.
One change in platform/x86 is the patch I forgot to apply from a
series for CS35L41 codec"
* tag 'sound-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
ALSA: hda/realtek: Add quirk for Clevo NS50PU, NS70PU
ALSA: info: Fix llseek return value when using callback
ALSA: hda/cs8409: Support new Dolphin Variants
platform/x86: serial-multi-instantiate: Add CLSA0101 Laptop
ALSA: hda/realtek: Add quirk for Lenovo Yoga7 14IAL7
ALSA: hda: cs35l41: Clarify support for CSC3551 without _DSD Properties
ALSA: hda/realtek: Add quirks for ASUS Zenbooks using CS35L41
ASoC: codec: tlv320aic32x4: fix mono playback via I2S
ASoC: rt5640: Fix the JD voltage dropping issue
ASoC: tas2770: Fix handling of mute/unmute
ASoC: tas2770: Drop conflicting set_bias_level power setting
ASoC: tas2770: Allow mono streams
ASoC: tas2770: Set correct FSYNC polarity
ASoC: Intel: fix sof_es8336 probe
ASoC: DPCM: Don't pick up BE without substream
ASoC: SOF: ipc3-topology: Fix clang -Wformat warning
ASoC: sh: rz-ssi: Improve error handling in rz_ssi_probe() error path
ASoC: SOF: Intel: hda: Fix potential buffer overflow by snprintf()
ASoC: SOF: debug: Fix potential buffer overflow by snprintf()
ASoC: Intel: avs: Fix potential buffer overflow by snprintf()
...
Where available, obtain the handle to retimer switch specified via
firmware, and update the mux configuration callsites to add retimer
support for supported modes.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220816214857.2088914-8-pmalani@chromium.org
Some of the return paths for the cros_typec_get_switch_handles()
aren't necessary. Clean up the return paths to only undo the handle
get's which succeeded.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220816214857.2088914-7-pmalani@chromium.org
Register mode switch devices for Type-C connectors, when they are
specified by firmware. These control Type-C configuration for any USB
Type-C mode switches (sometimes known as "muxes") which are controlled
by the ChromeOS EC.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220816214857.2088914-6-pmalani@chromium.org
The ChromeOS EC updates Type-C status events when mux set requests from
the Application Processor (AP) are completed. Add a check to the
flow of configuring muxes to look for this status done bit, so that
the driver is aware that the mux set completed successfully or not.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220816214857.2088914-5-pmalani@chromium.org
Invoke ChromeOS EC host commands to set EC-controlled retimer switches
to the state the Type-C framework instructs.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220816214857.2088914-4-pmalani@chromium.org
Introduce a driver to configure USB Type-C mode switches and retimers
which are controlled by the ChromeOS EC (Embedded Controller).
This allows Type-C port drivers, as well as alternate mode drivers to
configure their relevant mode switches and retimers according to the
Type-C state they want to achieve.
ACPI devices with ID GOOG001A will bind to this driver.
Currently, we only register a retimer switch with a stub set function.
Subsequent patches will implement the host command set functionality,
and introduce mode switches.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220816214857.2088914-3-pmalani@chromium.org
The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This reverts commit a10fba0377145fccefea4dc4dd5915b7ed87e546: the
proposed API isn't supported on all transports but no
effort was made to address this.
It might not be hard to fix if we want to: maybe just
rename size to size_hint and make sure legacy
transports ignore the hint.
But it's not sure what the benefit is in any case, so
let's drop it.
Fixes: a10fba0377 ("virtio: find_vqs() add arg sizes")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220816053602.173815-8-mst@redhat.com>
Add software nodes for the HID sensor collection and the UCM UCSI HID
client to the Surface Pro 8. In contrast to the type-cover devices,
these devices are directly attached to the SAM controller, without any
hub.
This enables support for HID-based sensors, including the ones used for
automatic screen rotation, on the Surface Pro 8.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220810144117.493710-4-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On Windows, the HID devices with target ID 1 are grouped as "Surface Hot
Plug - SAM". Rename their device nodes in the registry to reflect that
and update the comments accordingly.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220810144117.493710-3-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Rename HID device nodes based on their function. In particular, these
are nodes for firmware updates via the CFU mechanism (component firmware
update), HID based sensors, and a USB-C UCSI client.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220810144117.493710-2-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Some of the older platforms with _HID "AMDI0100" PMF driver can be force
loaded by interested users but only for experimental purposes.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-11-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The transition to auto-mode happens when the PMF driver receives
AMT (Auto Mode transition) event. transition logic will reside in the
PMF driver but the events would come from other supported drivers[1].
The thermal parameters would vary between when a performance "on-lap" mode
is detected and versus when not. The CQL event would get triggered from
other drivers, so that PMF driver would adjust the system thermal config
based on the ACPI inputs.
OEMs can control whether or not to enable AMT or CQL via other supported
drivers[1] but the actual transition logic resides in the AMD PMF driver.
When an AMT event is received the automatic mode transition RAPL algorithm
will run. When a CQL event is received an performance "on-lap" mode will
be enabled and thermal parameters will be adjusted accordingly.
[1]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/commit/?h=review-hans&id=755b249250df1b612d982f3b702c831b26ecdf73
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-10-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This feature has 3 modes quiet, balanced, performance
The objective of this feature is to track the moving average of system
power over the time period specified and switch to the subsequent mode.
In order to do this, PMF driver will get the moving average of APU power
from PMFW and power threshold, time constants, system config parameters
from OEM inputs.
System power as read by PMF driver from PMFW is the filtered value over
the sampling window. Every sampling window, moving average of system power
is computed. At the end of the monitoring window, the moving average is
compared against the threshold for mode switch for decision making.
With AMD managing the system config limits, any mode switch within
auto-mode will result in limits of fPPT/sPPT/STAPM or STT being scaled
down.
When "auto mode" is enabled, the static slider control remains out of
the PMF driver, so the platform_profile registration would not
happen in PMF driver.
The transition to auto-mode only happens when the APMF fn5 is enabled
in BIOS, platform_profile set to "balanced" and a AMT
(Auto Mode transition) is received.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-9-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
PMF driver polls for metrics information from PMFW to understand the system
behavior, power consumption etc.
This metrics table information will be used the PMF features to tweak the
thermal heuristics. The poll duration can also be changed by the user
by changing the poll duration time.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-8-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
PMF has a generic interface defined via PMF ACPI fn9 for influencing fan
policy during mode switch.
PMF ACPI fn9 will normally be invoked when AMDPMF needs to change the fan
table index for the EC. When AMDPMF is loaded this function will be invoked
to change fan speed. OEM can also choose to report the actual fan table
index and fan RPM to PMF through OEM structure.
This information will be communicated by PMF driver to customer BIOS.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-7-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
PMF driver can send periodic heartbeat signals to OEM BIOS. When BIOS does
not receive the signal after a period of time, it can infer that AMDPMF
has hung or failed to load.
In this situation, BIOS can fallback to legacy operations. OEM can modify
the time interval of the signal or completely disable signals through
ACPI Method.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-6-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add debugfs support to the PMF driver so that using this interface the
live counters from the PMFW can be queried to see if the power parameters
are getting set properly when a certain power mode change happens.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-5-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
SPS (a.k.a. Static Power Slider) gives a feel of Windows performance
power slider for the Linux users, where the user selects a certain
mode (like "balanced", "low-power" or "performance") and the thermals
associated with each selected mode gets applied from the silicon
side via the mailboxes defined through PMFW.
PMF driver hooks to platform_profile by reading the PMF ACPI fn9 to
see if the support is being advertised by ACPI interface.
If supported, the PMF driver reacts to platform_profile selection choices
made by the user and adjust the system thermal behavior.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-4-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
PMF driver implements the ACPI methods as defined by AMD for PMF Support.
The ACPI layer acts as a glue that helps in providing the infrastructure
for OEMs customization.
OEMs can refer to PMF support documentation to decide on the list of
functions to be supported on their specific platform model.
AMD mandates that PMF ACPI fn0 and fn1 to be implemented which
provides the set of functions, params and the notifications that
would be sent to PMF driver so that PMF driver can adapt and
react.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-3-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
PMF core layer is meant to abstract the common functionalities
across PMF features. This layer also does the plumbing work
like setting up the mailbox channel for the communication
between the PMF driver and the PMFW (Power Management Firmware)
running on the SMU.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-2-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The Surface Laptop Go 2 seems to have the same SAM client devices as the
Surface Laptop Go 1, so re-use its node group.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220810140133.99087-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The x86-android-tablets handling for the Chuwi Hi8 is only necessary with
the Android BIOS and it is causing problems with the Windows BIOS version.
Specifically when trying to register the already present touchscreen
x86_acpi_irq_helper_get() calls acpi_unregister_gsi(), this breaks
the working of the touchscreen and also leads to an oops:
[ 14.248946] ------------[ cut here ]------------
[ 14.248954] remove_proc_entry: removing non-empty directory 'irq/75', leaking at least 'MSSL0001:00'
[ 14.248983] WARNING: CPU: 3 PID: 440 at fs/proc/generic.c:718 remove_proc_entry
...
[ 14.249293] unregister_irq_proc+0xe0/0x100
[ 14.249305] free_desc+0x29/0x70
[ 14.249312] irq_free_descs+0x4b/0x80
[ 14.249320] mp_unmap_irq+0x5c/0x60
[ 14.249329] acpi_unregister_gsi_ioapic+0x2a/0x40
[ 14.249338] x86_acpi_irq_helper_get+0x4b/0x190 [x86_android_tablets]
[ 14.249355] x86_android_tablet_init+0x178/0xe34 [x86_android_tablets]
Add an init callback for the Chuwi Hi8, which detects when the Windows BIOS
is in use and exits with -ENODEV in that case, fixing this.
Fixes: 84c2dcdd47 ("platform/x86: x86-android-tablets: Add an init() callback to struct x86_dev_info")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220810141934.140771-1-hdegoede@redhat.com
On Intel hardware the SLP_TYPx bitfield occupies bits 10-12 as per ACPI
specification (see Table 4.13 "PM1 Control Registers Fixed Hardware
Feature Control Bits" for the details).
Fix the mask and other related definitions accordingly.
Fixes: 93e5eadd1f ("x86/platform: New Intel Atom SOC power management controller driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220801113734.36131-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Some EC based devices (e.g. Fingerpint MCU) can jump to RO part of the
firmware (intentionally or due to device reboot). The RO part doesn't
change during the device lifecycle, so it won't support newer version
of EC_CMD_GET_NEXT_EVENT command.
Function cros_ec_query_all() is responsible for finding maximum
supported MKBP event version. It's usually called when the device is
running RW part of the firmware, so the command version can be
potentially higher than version supported by the RO.
The problem was fixed by updating maximum supported version when the
device returns EC_RES_INVALID_VERSION (mapped to -ENOPROTOOPT). That way
the kernel will use highest common version supported by RO and RW.
Fixes: 3300fdd630 ("platform/chrome: cros_ec: handle MKBP more events flag")
Cc: <stable@vger.kernel.org> # 5.10+
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Patryk Duda <pdk@semihalf.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220802154128.21175-1-pdk@semihalf.com
A huge patchset supporting vq resize using the
new vq reset capability.
Features, fixes, cleanups all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmL2F9APHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp00QIAKpxyu+zCtrdDuh68DsNn1Cu0y0PXG336ySy
MA1ck/bv94MZBIbI/Bnn3T1jDmUqTFHJiwaGz/aZ5gGAplZiejhH5Ds3SYjHckaa
MKeJ4FTXin9RESP+bXhv4BgZ+ju3KHHkf1jw3TAdVKQ7Nma1u4E6f8nprYEi0TI0
7gLUYenqzS7X1+v9O3rEvPr7tSbAKXYGYpV82sSjHIb9YPQx5luX1JJIZade8A25
mTt5hG1dP1ugUm1NEBPQHjSvdrvO3L5Ahy0My2Bkd77+tOlNF4cuMPt2NS/6+Pgd
n6oMt3GXqVvw5RxZyY8dpknH5kofZhjgFyZXH0l+aNItfHUs7t0=
=rIo2
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- A huge patchset supporting vq resize using the new vq reset
capability
- Features, fixes, and cleanups all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (88 commits)
vdpa/mlx5: Fix possible uninitialized return value
vdpa_sim_blk: add support for discard and write-zeroes
vdpa_sim_blk: add support for VIRTIO_BLK_T_FLUSH
vdpa_sim_blk: make vdpasim_blk_check_range usable by other requests
vdpa_sim_blk: check if sector is 0 for commands other than read or write
vdpa_sim: Implement suspend vdpa op
vhost-vdpa: uAPI to suspend the device
vhost-vdpa: introduce SUSPEND backend feature bit
vdpa: Add suspend operation
virtio-blk: Avoid use-after-free on suspend/resume
virtio_vdpa: support the arg sizes of find_vqs()
vhost-vdpa: Call ida_simple_remove() when failed
vDPA: fix 'cast to restricted le16' warnings in vdpa.c
vDPA: !FEATURES_OK should not block querying device config space
vDPA/ifcvf: support userspace to query features and MQ of a management device
vDPA/ifcvf: get_config_size should return a value no greater than dev implementation
vhost scsi: Allow user to control num virtqueues
vhost-scsi: Fix max number of virtqueues
vdpa/mlx5: Support different address spaces for control and data
vdpa/mlx5: Implement susupend virtqueue callback
...
find_vqs() adds a new parameter sizes to specify the size of each vq
vring.
NULL as sizes means that all queues in find_vqs() use the maximum size.
A value in the array is 0, which means that the corresponding queue uses
the maximum size.
In the split scenario, the meaning of size is the largest size, because
it may be limited by memory, the virtio core will try a smaller size.
And the size is power of 2.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-34-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
virtio-net can display the maximum (supported by hardware) ring size in
ethtool -g eth0.
When the subsequent patch implements vring reset, it can judge whether
the ring size passed by the driver is legal based on this.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220801063902.129329-2-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Highlights:
- Microsoft Surface:
- SSAM hot unplug support
- Surface Pro 8 keyboard cover support
- Tablet mode switch support for Surface Pro 8 and Surface Laptop Studio
- thinkpad_acpi: AMD Automatice Mode Transitions (AMT) support
- Mellanox:
- Vulcan chassis COMe NVSwitch management support
- XH3000 support
- New generic/shared Intel P2SB (Primary to Sideband) support
- Lots of small cleanups
- Various small bugfixes
- Various new hardware ids / quirks additions
The following is an automated git shortlog grouped by driver:
ACPI:
- video: Fix acpi_video_handles_brightness_key_presses()
- video: Change how we determine if brightness key-presses are handled
Documentation/ABI:
- Add new attributes for mlxreg-io sysfs interfaces
- mlxreg-io: Fix contact info
Drop the PMC_ATOM Kconfig option:
- Drop the PMC_ATOM Kconfig option
EDAC, pnd2:
- convert to use common P2SB accessor
- Use proper I/O accessors and address space annotation
HID:
- surface-hid: Add support for hot-removal
ISST:
- PUNIT device mapping with Sub-NUMA clustering
Kconfig:
- Remove unnecessary "if X86"
MAINTAINERS:
- repair file entry in MICROSOFT SURFACE AGGREGATOR TABLET-MODE SWITCH
Merge tag 'ib-mfd-edac-i2c-leds-pinctrl-platform-watchdog-v5.20' into review-hans:
- Merge tag 'ib-mfd-edac-i2c-leds-pinctrl-platform-watchdog-v5.20' into review-hans
Move AMD platform drivers to separate directory:
- Move AMD platform drivers to separate directory
acer-wmi:
- Use backlight helper
acer_wmi:
- Cleanup Kconfig selects
apple-gmux:
- Use backlight helper
asus-wmi:
- Add mic-mute LED classdev support
- Add key mappings
compal-laptop:
- Use backlight helper
efi:
- Fix efi_power_off() not being run before acpi_power_off() when necessary
gigabyte-wmi:
- add support for B660I AORUS PRO DDR4
hp-wmi:
- Ignore Sanitization Mode event
i2c:
- i801: convert to use common P2SB accessor
ideapad-laptop:
- Add Ideapad 5 15ITL05 to ideapad_dytc_v4_allow_table[]
- Add allow_v4_dytc module parameter
intel/pmc:
- Add Alder Lake N support to PMC core driver
intel_atomisp2_led:
- Also turn off the always-on camera LED on the Asus T100TAF
leds:
- simatic-ipc-leds-gpio: Add GPIO version of Siemens driver
- simatic-ipc-leds: Convert to use P2SB accessor
mfd:
- lpc_ich: Add support for pinctrl in non-ACPI system
- lpc_ich: Switch to generic p2sb_bar()
- lpc_ich: Factor out lpc_ich_enable_spi_write()
mlx-platform:
- Add COME board revision register
- Add support for new system XH3000
- Introduce support for COMe NVSwitch management module for Vulcan chassis
- Add support for systems equipped with two ASICs
- Add cosmetic changes for alignment
- Make activation of some drivers conditional
p2sb:
- Move out of X86_PLATFORM_DEVICES dependency
panasonic-laptop:
- Use acpi_video_get_backlight_type()
- filter out duplicate volume up/down/mute keypresses
- don't report duplicate brightness key-presses
- revert "Resolve hotkey double trigger bug"
- sort includes alphabetically
- de-obfuscate button codes
pinctrl:
- intel: Check against matching data instead of ACPI companion
platform/mellanox:
- mlxreg-lc: Fix error flow and extend verbosity
- mlxreg-io: Add locking for io operations
- nvsw-sn2201: fix error code in nvsw_sn2201_create_static_devices()
platform/olpc:
- Fix uninitialized data in debugfs write
platform/surface:
- gpe: Add support for 13" Intel version of Surface Laptop 4
- tabletsw: Fix __le32 integer access
- Update copyright year of various drivers
- aggregator: Move subsystem hub drivers to their own module
- aggregator: Move device registry helper functions to core module
- aggregator_registry: Add support for tablet mode switch on Surface Laptop Studio
- aggregator_registry: Add support for tablet mode switch on Surface Pro 8
- Add KIP/POS tablet-mode switch driver
- aggregator: Add helper macros for requests with argument and return value
- aggregator: Reserve more event- and target-categories
- avoid flush_scheduled_work() usage
- aggregator_registry: Add support for keyboard cover on Surface Pro 8
- aggregator_registry: Add KIP device hub
- aggregator_registry: Change device ID for base hub
- aggregator_registry: Generify subsystem hub functionality
- aggregator: Add comment for KIP subsystem category
- aggregator_registry: Use client device wrappers for notifier registration
- aggregator: Allow notifiers to avoid communication on unregistering
- aggregator: Allow devices to be marked as hot-removed
- aggregator: Allow is_ssam_device() to be used when CONFIG_SURFACE_AGGREGATOR_BUS is disabled
platform/x86/amd/pmc:
- Add new platform support
- Add new acpi id for PMC controller
platform/x86/dell:
- Kconfig: Remove unnecessary "depends on X86_PLATFORM_DEVICES"
platform/x86/intel:
- Add Primary to Sideband (P2SB) bridge support
platform/x86/intel/ifs:
- Mark as BROKEN
platform/x86/intel/pmt:
- telemetry: Fix fixed region handling
platform/x86/intel/vsec:
- Fix wrong type for local status variables
- Add PCI error recovery support to Intel PMT
- Add support for Raptor Lake
- Rework early hardware code
pmc_atom:
- Fix comment typo
- Match all Lex BayTrail boards with critclk_systems DMI table
power/supply:
- surface_battery: Use client device wrappers for notifier registration
- surface_charger: Use client device wrappers for notifier registration
serial-multi-instantiate:
- Sort ACPI IDs by HID
- Get rid of redundant 'else'
- Use while (i--) pattern to clean up
- Improve dev_err_probe() messaging
- Drop duplicate check
- Improve autodetection
simatic-ipc:
- drop custom P2SB bar code
sony-laptop:
- Remove useless comparisons in sony_pic_read_possible_resource()
system76_acpi:
- Use dev_get_drvdata
thinkpad_acpi:
- Enable AMT by default on supported systems
- Add support for hotkey 0x131a
- Add support for automatic mode transitions
- profile capabilities as integer
- do not use PSC mode on Intel platforms
- Fix a memory leak of EFCH MMIO resource
- Replace custom str_on_off() etc
- Sort headers for better maintenance
- Use backlight helper
tools/power/x86/intel-speed-select:
- Remove unneeded semicolon
- Fix off by one check
watchdog:
- simatic-ipc-wdt: convert to use P2SB accessor
x86-android-tablets:
- Fix Lenovo Yoga Tablet 2 830/1050 poweroff again
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmLrndEUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zeMgf7BjSCz6ZA8SSY1i8QHDTvdjySihHJ
j07Gn3j1T/5G00R/r6viMDE4PxcYvMAPXjq3azepKQd8H5kGfE323SA6fgWFPAvi
P2OvEfvWfI5S8FYGYPBkNP2MjQ5MFe7qzLEh3+wQH0ocJ7WRCi457B4Xvtd2gWI3
dHj5gMSWC3O5xNa2S4Mg3dnD9uJlwhX+FNjWIuRy8eh5+DikgByyC4B+uW6WtO5e
t0rmIm6q5wUzB7dIetJLoAQwrcpYAOkK7L33G9h/7knWAfiJfklaKTbftnoxbDSv
iGWODkLDyob4C48DmVusS6WMEhPUzl/R33+tk6LjVt/YOYOP030EMtCECQ==
=Krhc
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- Microsoft Surface:
- SSAM hot unplug support
- Surface Pro 8 keyboard cover support
- Tablet mode switch support for Surface Pro 8 and Surface Laptop
Studio
- thinkpad_acpi:
- AMD Automatice Mode Transitions (AMT) support
- Mellanox:
- Vulcan chassis COMe NVSwitch management support
- XH3000 support
- New generic/shared Intel P2SB (Primary to Sideband) support
- Lots of small cleanups
- Various small bugfixes
- Various new hardware ids / quirks additions
* tag 'platform-drivers-x86-v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (105 commits)
platform/x86/intel/vsec: Fix wrong type for local status variables
platform/x86: p2sb: Move out of X86_PLATFORM_DEVICES dependency
platform/x86: pmc_atom: Fix comment typo
platform/surface: gpe: Add support for 13" Intel version of Surface Laptop 4
platform/olpc: Fix uninitialized data in debugfs write
platform/mellanox: mlxreg-lc: Fix error flow and extend verbosity
platform/x86: pmc_atom: Match all Lex BayTrail boards with critclk_systems DMI table
platform/x86: sony-laptop: Remove useless comparisons in sony_pic_read_possible_resource()
tools/power/x86/intel-speed-select: Remove unneeded semicolon
tools/power/x86/intel-speed-select: Fix off by one check
platform/surface: tabletsw: Fix __le32 integer access
Documentation/ABI: Add new attributes for mlxreg-io sysfs interfaces
Documentation/ABI: mlxreg-io: Fix contact info
platform/mellanox: mlxreg-io: Add locking for io operations
platform/x86: mlx-platform: Add COME board revision register
platform/x86: mlx-platform: Add support for new system XH3000
platform/x86: mlx-platform: Introduce support for COMe NVSwitch management module for Vulcan chassis
platform/x86: mlx-platform: Add support for systems equipped with two ASICs
platform/x86: mlx-platform: Add cosmetic changes for alignment
platform/x86: mlx-platform: Make activation of some drivers conditional
...
The local status variables in intel_vsec_pci_error_detected()
and intel_vsec_pci_slot_reset() should have pci_ers_result_t as type
(and not pci_channel_state_t).
Also fix a whitespace error as well as intel_vsec_pci_err_handlers not
being marked static.
This fixes the following sparse errors:
drivers/platform/x86/intel/vsec.c:429:38: sparse: sparse: incorrect type in initializer (different base types) @@ expected restricted pci_channel_state_t [usertype] status @@ got restricted pci_ers_result_t @@
drivers/platform/x86/intel/vsec.c:429:38: sparse: expected restricted pci_channel_state_t [usertype] status
drivers/platform/x86/intel/vsec.c:429:38: sparse: got restricted pci_ers_result_t
drivers/platform/x86/intel/vsec.c:434:24: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted pci_channel_state_t [usertype] status @@ got restricted pci_ers_result_t @@
drivers/platform/x86/intel/vsec.c:434:24: sparse: expected restricted pci_channel_state_t [usertype] status
drivers/platform/x86/intel/vsec.c:434:24: sparse: got restricted pci_ers_result_t
drivers/platform/x86/intel/vsec.c:438:16: sparse: sparse: incorrect type in return expression (different base types) @@ expected restricted pci_ers_result_t @@ got restricted pci_channel_state_t [usertype] status @@
drivers/platform/x86/intel/vsec.c:438:16: sparse: expected restricted pci_ers_result_t
drivers/platform/x86/intel/vsec.c:438:16: sparse: got restricted pci_channel_state_t [usertype] status
drivers/platform/x86/intel/vsec.c:444:38: sparse: sparse: incorrect type in initializer (different base types) @@ expected restricted pci_channel_state_t [usertype] status @@ got restricted pci_ers_result_t @@
drivers/platform/x86/intel/vsec.c:444:38: sparse: expected restricted pci_channel_state_t [usertype] status
drivers/platform/x86/intel/vsec.c:444:38: sparse: got restricted pci_ers_result_t
drivers/platform/x86/intel/vsec.c:457:16: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted pci_channel_state_t [usertype] status @@ got restricted pci_ers_result_t @@
drivers/platform/x86/intel/vsec.c:457:16: sparse: expected restricted pci_channel_state_t [usertype] status
drivers/platform/x86/intel/vsec.c:457:16: sparse: got restricted pci_ers_result_t
drivers/platform/x86/intel/vsec.c:472:16: sparse: sparse: incorrect type in return expression (different base types) @@ expected restricted pci_ers_result_t @@ got restricted pci_channel_state_t [usertype] status @@
drivers/platform/x86/intel/vsec.c:472:16: sparse: expected restricted pci_ers_result_t
drivers/platform/x86/intel/vsec.c:472:16: sparse: got restricted pci_channel_state_t [usertype] status
drivers/platform/x86/intel/vsec.c:480:33: sparse: sparse: symbol 'intel_vsec_pci_err_handlers' was not declared. Should it be static?
Reported-by: kernel test robot <lkp@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: David E Box <david.e.box@intel.com>
Cc: Gayatri Kammela <gayatri.kammela@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220801145536.172410-1-hdegoede@redhat.com
The P2SB library is used for various drivers, including server
platforms. That's why the dependency on X86_PLATFORM_DEVICES
seems superfluous.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220718145328.14374-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Merge ACPI device object management changes for v5.20-rc1.
- Use the facilities provided by the driver core and some additional
helpers to handle the children of a given ACPI device object in
multiple places instead of using the children and node list heads in
struct acpi_device which is error prone (Rafael Wysocki).
- Fix ACPI-related device reference counting issue in the hisi_lpc bus
driver (Yang Yingliang).
- Drop the children and node list heads that are not needed any more
from struct acpi_device (Rafael Wysocki).
- Drop driver member from struct acpi_device (Uwe Kleine-König).
- Drop redundant check from acpi_device_remove() (Uwe Kleine-König).
* acpi-bus:
ACPI: bus: Drop unused list heads from struct acpi_device
hisi_lpc: Use acpi_dev_for_each_child()
bus: hisi_lpc: fix missing platform_device_put() in hisi_lpc_acpi_probe()
ACPI: bus: Drop driver member of struct acpi_device
ACPI: bus: Drop redundant check in acpi_device_remove()
mfd: core: Use acpi_dev_for_each_child()
ACPI / MMC: PM: Unify fixing up device power
soundwire: Use acpi_dev_for_each_child()
platform/x86/thinkpad_acpi: Use acpi_dev_for_each_child()
ACPI: scan: Walk ACPI device's children using driver core
ACPI: bus: Introduce acpi_dev_for_each_child_reverse()
ACPI: video: Use acpi_dev_for_each_child()
ACPI: bus: Export acpi_dev_for_each_child() to modules
ACPI: property: Use acpi_dev_for_each_child() for child lookup
ACPI: container: Use acpi_dev_for_each_child()
USB: ACPI: Replace usb_acpi_find_port() with acpi_find_child_by_adr()
thunderbolt: ACPI: Replace tb_acpi_find_port() with acpi_find_child_by_adr()
ACPI: glue: Introduce acpi_find_child_by_adr()
ACPI: glue: Introduce acpi_dev_has_children()
ACPI: glue: Use acpi_dev_for_each_child()
The 13" Intel version of the Surface Laptop 4 uses the same GPE as the
Surface Laptop Studio for wakeups via the lid. Set it up accordingly.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220721121120.2002430-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The call to:
size = simple_write_to_buffer(cmdbuf, sizeof(cmdbuf), ppos, buf, size);
will succeed if at least one byte is written to the "cmdbuf" buffer.
The "*ppos" value controls which byte is written. Another problem is
that this code does not check for errors so it's possible for the entire
buffer to be uninitialized.
Inintialize the struct to zero to prevent reading uninitialized stack
data.
Debugfs is normally only writable by root so the impact of this bug is
very minimal.
Fixes: 6cca83d498 ("Platform: OLPC: move debugfs support from x86 EC driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YthIKn+TfZSZMEcM@kili
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fix error flow:
- Clean-up client object in case of probing failure.
- Prevent running remove routine in case of probing failure.
Probing and removing are invoked by hotplug events raised upon line
card insertion and removing. If probing procedure failed all data is
cleared and there is nothing to do in remove routine.
Fixes: 62f9529b8d ("platform/mellanox: mlxreg-lc: Add initial support for Nvidia line card devices")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20220719153540.61304-1-vadimp@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The critclk_systems[] DMI match table already contains 2 Lex BayTrail
boards and patches were just submitted to add 3 more entries for the
following models: 3I380NX, 3I380A, 3I380CW.
Looking at: https://www.lex.com.tw/products/embedded-ipc-board/
we can see that Lex BayTrail makes many embedded boards with
multiple ethernet boards and none of their products are battery
powered so we don't need to worry (too much) about power consumption
when suspended.
Add a new DMI match which simply matches all Lex BayTrail boards and drop
the 2 existing board specific quirks.
Fixes: 648e921888 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Reported-by: Michael Schöne <michael.schoene@rhebo.com>
Reported-by: Paul Spooren <paul.spooren@rhebo.com>
Reported-by: Matwey V. Kornilov <matwey@sai.msu.ru>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Local variable 'p' is initialized by an address
of field of acpi_resource structure, so it does
not make sense to compare 'p' with NULL.
Local variable 'io' is initialized by an address
of field of acpi_resource structure, so it does
not make sense to compare 'io' with NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Andrey Strachuk <strochuk@ispras.ru>
Link: https://lore.kernel.org/r/20220719110341.7239-1-strochuk@ispras.ru
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Merge CROS_KUNIT and CROS_EC_PROTO_KUNIT_TEST so that when they're built
as modules cros_kunit_util doesn't need to export the symbols.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220720044754.4026295-2-tzungbi@kernel.org
drivers/platform/chrome/cros_kbd_led_backlight.c got a new build warning
when using the randconfig in [1]:
>>> warning: unused variable 'keyboard_led_drvdata_ec_pwm'
The warning happens when CONFIG_CROS_EC is set but CONFIG_OF is not set.
Reproduce:
- mkdir build_dir
- wget [1] -O build_dir/.config
- COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 \
O=build_dir ARCH=s390 SHELL=/bin/bash drivers/platform/chrome/
Fix the warning by using __maybe_unused. Also use IS_ENABLED() because
CROS_EC is a tristate.
[1]: https://download.01.org/0day-ci/archive/20220717/202207170538.MR39dw8m-lkp@intel.com/config
Fixes: 40f5814374 ("platform/chrome: cros_kbd_led_backlight: support EC PWM backend")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220718105047.2356542-1-tzungbi@kernel.org
cros_ec_check_features() gets EC features if it hasn't had cache, and
checks whether the given EC_FEATURE_* is supported or not.
Add Kunit tests for cros_ec_check_features().
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220622041040.202737-6-tzungbi@kernel.org
cros_ec_cmd_xfer_status() is the only exported function that calls
static function cros_ec_map_error().
Add Kunit test for cros_ec_map_error() through calling
cros_ec_cmd_xfer_status().
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220622041040.202737-3-tzungbi@kernel.org
cros_ec_cmd_xfer_status() calls cros_ec_cmd_xfer() and cros_ec_map_error().
Given that there are already test cases for cros_ec_cmd_xfer(), only add
basic Kunit tests for cros_ec_cmd_xfer_status().
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220622041040.202737-2-tzungbi@kernel.org
cros_ec_wait_until_complete() sends EC_CMD_GET_COMMS_STATUS which expects
to receive sizeof(struct ec_response_get_comms_status) from
cros_ec_xfer_command().
Add Kunit test and expect to receive an error code when
cros_ec_xfer_command() returns 0.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220718050914.2267370-10-tzungbi@kernel.org
While EC_COMMS_STATUS_PROCESSING flag is still on after it tries
EC_COMMAND_RETRIES times for sending EC_CMD_GET_COMMS_STATUS,
cros_ec_wait_until_complete() doesn't return an error code.
Return -EAGAIN in the case instead.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220718050914.2267370-9-tzungbi@kernel.org
While EC_COMMS_STATUS_PROCESSING flag is still on after it tries
EC_COMMAND_RETRIES times for sending EC_CMD_GET_COMMS_STATUS,
cros_ec_wait_until_complete() doesn't return an error code.
Change the expectation to an error code.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220718050914.2267370-8-tzungbi@kernel.org
EC returns EC_RES_IN_PROGRESS if the host command needs more time to
complete. Whenever receives the return code, cros_ec_send_command()
sends EC_CMD_GET_COMMS_STATUS to query the command status.
Separate cros_ec_wait_until_complete() from cros_ec_send_command().
It sends EC_CMD_GET_COMMS_STATUS and waits until the previous command
was completed, or encountered error, or timed out.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220718050914.2267370-7-tzungbi@kernel.org
cros_ec_send_command() has extra logic to handle EC_RES_IN_PROGRESS.
Separate the command transfer part into cros_ec_xfer_command() so
that other functions can re-use it.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220718050914.2267370-6-tzungbi@kernel.org
cros_ec_cmd_xfer() is the only exported function that calls static
function cros_ec_send_command().
Add Kunit tests for cros_ec_send_command() through calling
cros_ec_cmd_xfer().
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220718050914.2267370-5-tzungbi@kernel.org
cros_ec_cmd_xfer() transfers the given command and data if any. It
performs some sanity checks and calls cros_ec_send_command().
Add Kunit tests for cros_ec_cmd_xfer().
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220718050914.2267370-4-tzungbi@kernel.org
Instead of using manually managed altmode structs, register the port's
altmodes with the Type-C framework. This facilitates matching them to
partner altmodes later.
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220712210318.2671292-2-pmalani@chromium.org
Rename "p_altmode" to "port_altmode" which is a less ambiguous name for
the port_altmode struct array.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220712210318.2671292-1-pmalani@chromium.org
The sources.count field is a __le32 inside a packed struct. So use the
proper functions to access it.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 9f794056db ("platform/surface: Add KIP/POS tablet-mode switch driver")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220717120735.2052160-1-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Highlights:
- Fix brightness key events getting reported twice on some Dell's
regression caused by recent Panasonic hotkey fixes
- Fix poweroff no longer working on some devices regression caused
by recent poweroff handler rework
- Mark new (in 5.19) Intel IFS driver as broken, because of some issues
surrounding the userspace (sysfs) API which need to be cleared up
- Some hardware-id / quirk additions
The following is an automated git shortlog grouped by driver:
ACPI:
- video: Fix acpi_video_handles_brightness_key_presses()
asus-wmi:
- Add key mappings
efi:
- Fix efi_power_off() not being run before acpi_power_off() when necessary
gigabyte-wmi:
- add support for B660I AORUS PRO DDR4
intel_atomisp2_led:
- Also turn off the always-on camera LED on the Asus T100TAF
platform/x86/amd/pmc:
- Add new platform support
- Add new acpi id for PMC controller
platform/x86/intel/ifs:
- Mark as BROKEN
x86-android-tablets:
- Fix Lenovo Yoga Tablet 2 830/1050 poweroff again
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmLRTGIUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9wd9Af+NQisrNn21CYMfOFPpn/r9c9mAyqA
KoukuuxXmPUqr83QB02JELmyK3nWWCRWf2DndNwOTAi+tQeAjlzfUrAKyjPxd98r
V5+zLm2lnxyOKFAuORd9xrTevfk/sjaasGbvBt2Y0c0iqNcZBg62cDDbMEM3bMX3
ESwvP9hCUQWFrUh1K9r900+xS6tzhfh5YRM5q26jH4CrNg7w/kF2CHEsP4tTtIPU
K9gwAmsqw/TfuJ2WjT+24E/yPZSzJZyu/Ak5+FZOtkr5KT0mHVR5ZzMHATvBWVsW
X8jzv+zSuZFUVLF7cmnxiP16g/zGoRMtI7njErWUe5UC2vGcbv/taxx9iQ==
=1uQg
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Highlights:
- Fix brightness key events getting reported twice on some Dells.
Regression caused by recent Panasonic hotkey fixes
- Fix poweroff no longer working on some devices regression caused
by recent poweroff handler rework
- Mark new (in 5.19) Intel IFS driver as broken, because of some
issues surrounding the userspace (sysfs) API which need to be
cleared up
- Some hardware-id / quirk additions"
* tag 'platform-drivers-x86-v5.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
ACPI: video: Fix acpi_video_handles_brightness_key_presses()
platform/x86: intel_atomisp2_led: Also turn off the always-on camera LED on the Asus T100TAF
platform/x86/intel/ifs: Mark as BROKEN
platform/x86: asus-wmi: Add key mappings
efi: Fix efi_power_off() not being run before acpi_power_off() when necessary
platform/x86: x86-android-tablets: Fix Lenovo Yoga Tablet 2 830/1050 poweroff again
platform/x86: gigabyte-wmi: add support for B660I AORUS PRO DDR4
platform/x86/amd/pmc: Add new platform support
platform/x86/amd/pmc: Add new acpi id for PMC controller
Add lock to protect user read/write access to the registers.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20220711084559.62447-8-vadimp@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Extend COME CPLD with board configuration register for getting board
revision. The value of this register is pushed by hardware through GPIO
pins.
The purpose of it is to expose some minor BOM changes.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Oleksandr Shamray <oleksandrs@nvidia.com>
Link: https://lore.kernel.org/r/20220711084559.62447-7-vadimp@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for new system type XH3000, which is a water cooling
Ethernet switch blade equipped with 32x200G Ethernet ports.
The system is recognized by "DMI_BOARD_NAME" and "DMI_PRODUCT_SKU" matches,
when these fields are set to "VMOD0005" and "HI139" respectively.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Felix Radensky <fradensky@nvidia.com>
Link: https://lore.kernel.org/r/20220711084559.62447-6-vadimp@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The Vulcan is chassis containing Nvidia's Hopper dGPU (GH100), NVswitch
(LS10) based HGX baseboard and COMe NVSwitch management module.
The system is built for artificial intelligence and accelerated
analytics applications. Vulcan is offered as an HGX product to cloud
service providers and OEMs, who intend to build fully interconnected
GPU systems for large scale deployments.
Driver is extended to support new COMe NVSwitch management module.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Oleksandr Shamray <oleksandrs@nvidia.com>
Link: https://lore.kernel.org/r/20220711084559.62447-5-vadimp@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Motivation is to support new systems equipped with two ASICs.
Extend driver with:
- The second ASIC health event.
- Per ASIC reset control, triggering reset of ASIC internal resources
and restarting ASIC initialization flow.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Oleksandr Shamray <oleksandrs@nvidia.com>
Link: https://lore.kernel.org/r/20220711084559.62447-4-vadimp@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Align the first argument with open parenthesis for
platform_device_register_resndata() calls.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Oleksandr Shamray <oleksandrs@nvidia.com>
Link: https://lore.kernel.org/r/20220711084559.62447-3-vadimp@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Current assumption in driver that any system is capable of LED,
hotplug or watchdog support. It could be not true for some new coming
systems.
Add validation for LED, hotplug, watchdog configuration and skip
activation of relevant drivers if not configured.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Oleksandr Shamray <oleksandrs@nvidia.com>
Link: https://lore.kernel.org/r/20220711084559.62447-2-vadimp@nvidia.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In some new ASUS devices, hotkey Fn+F13 is used for mic mute. If mic-mute
LED is present by checking WMI ASUS_WMI_DEVID_MICMUTE_LED, we will add a
mic-mute LED classdev, asus::micmute, in the asus-wmi driver to control
it. The binding of mic-mute LED controls will be swithched with LED
trigger.
Signed-off-by: PaddyKP_Yao <PaddyKP_Yao@asus.com>
Link: https://lore.kernel.org/r/20220711115125.2072508-1-PaddyKP_Yao@asus.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On Apollo Lake the pinctrl drivers will now come up without ACPI. Use
that instead of open coding it.
Create a new driver for that which can later be filled with more GPIO
based models, and which has different dependencies.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee@kernel.org>
The two drivers that used to use this have been switched over to the
common P2SB accessor, so this code is not needed any longer.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Since we have a common P2SB accessor in tree we may use it instead of
open coded variants.
Replace custom code by p2sb_bar() call.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
SoC features such as GPIO are accessed via a reserved MMIO area,
we don't know its address but can obtain it from the BAR of
the P2SB device, that device is normally hidden so we have to
temporarily unhide it, read address and hide it back.
There are already a few users and at least one more is coming which
require an access to Primary to Sideband (P2SB) bridge in order
to get IO or MMIO BAR hidden by BIOS.
Create a library to access P2SB for x86 devices in a unified way.
Background information
======================
Note, the term "bridge" is used in the documentation and it has nothing
to do with a PCI (host) bridge as per the PCI specifications.
The P2SB is an interesting device by its nature and hardware design.
First of all, it has several devices in the hardware behind it. These
devices may or may not be represented as ACPI devices by a firmware.
It also has a hardwired (to 0s) the least significant bits of the
base address register which is represented by the only 64-bit BAR0.
It means that OS mustn't reallocate the BAR.
On top of that in some cases P2SB is represented by function 0 on PCI
slot (in terms of B:D.F) and according to the PCI specification any
other function can't be seen until function 0 is present and visible.
In the PCI configuration space of P2SB device the full 32-bit register
is allocated for the only purpose of hiding the entire P2SB device. As
per [3]:
3.1.39 P2SB Control (P2SBC)—Offset E0h
Hide Device (HIDE): When this bit is set, the P2SB will return 1s on
any PCI Configuration Read on IOSF-P. All other transactions including
PCI Configuration Writes on IOSF-P are unaffected by this. This does
not affect reads performed on the IOSF-SB interface.
This doesn't prevent MMIO accesses, although preventing the OS from
assigning these addresses. The firmware on the affected platforms marks
the region as unusable (by cutting it off from the PCI host bridge
resources) as depicted in the Apollo Lake example below:
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window]
pci_bus 0000:00: root bus resource [mem 0x7b800001-0x7bffffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
The P2SB 16MB BAR is located at 0xd0000000-0xd0ffffff memory window.
The generic solution
====================
The generic solution for all cases when we need to access to the information
behind P2SB device is a library code where users ask for necessary resources
by demand and hence those users take care of not being run on the systems
where this access is not required.
The library provides the p2sb_bar() API to retrieve the MMIO of the BAR0 of
the device from P2SB device slot.
P2SB unconditional unhiding awareness
=====================================
Technically it's possible to unhide the P2SB device and devices on
the same PCI slot and access them at any time as needed. But there are
several potential issues with that:
- the systems were never tested against such configuration and hence
nobody knows what kind of bugs it may bring, especially when we talk
about SPI NOR case which contains Intel FirmWare Image (IFWI) code
(including BIOS) and already known to be problematic in the past for
end users
- the PCI by its nature is a hotpluggable bus and in case somebody
attaches a driver to the functions of a P2SB slot device(s) the
end user experience and system behaviour can be unpredictable
- the kernel code would need some ugly hacks (or code looking as an
ugly hack) under arch/x86/pci in order to enable these devices on
only selected platforms (which may include CPU ID table followed by
a potentially growing number of DMI strings
The future improvements
=======================
The future improvements with this code may go in order to gain some kind
of cache, if it's possible at all, to prevent unhiding and hiding many
times to take static information that may be saved once per boot.
Links
=====
[1]: https://lab.whitequark.org/notes/2017-11-08/accessing-intel-ich-pch-gpios/
[2]: https://cdrdv2.intel.com/v1/dl/getContent/332690?wapkw=332690
[3]: https://cdrdv2.intel.com/v1/dl/getContent/332691?wapkw=332691
[4]: https://medium.com/@jacksonchen_43335/bios-gpio-p2sb-70e9b829b403
Signed-off-by: Jonathan Yong <jonathan.yong@intel.com>
Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Henning Schild <henning.schild@siemens.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee@kernel.org>
The typec_register_port() can fail with EPROBE_DEFER if the endpoint
node hasn't probed yet. In order to avoid spamming the log with errors
in that case, log using dev_err_probe().
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220712214554.545035-1-nfraprado@collabora.com
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Like the Asus T100TA the Asus T100TAF has a camera LED which is always
on by default and both also use the same GPIO for the LED.
Relax the DMI match for the Asus T100TA so that it also matches
the T100TAF.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220710173658.221528-1-hdegoede@redhat.com
Like the Asus T100TA the Asus T100TAF has a camera LED which is always
on by default and both also use the same GPIO for the LED.
Relax the DMI match for the Asus T100TA so that it also matches
the T100TAF.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220710173658.221528-1-hdegoede@redhat.com
It's easier to maintain the sorted table.
Keep the sorting order in sync with one in drivers/acpi/scan.c.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220709211653.18938-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In the snippets like the following
if (...)
return / goto / break / continue ...;
else
...
the 'else' is redundant. Get rid of it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220709211653.18938-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Drop duplicate print of returned value in the messages and use pattern
return dev_err_probe(...) where it's possible.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220709211653.18938-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The device_get_match_data() checks for firmware node to be present,
there is no need to check for ACPI companion.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220709211653.18938-2-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Instead of calling specific resource counter, let just probe each
of the type and see what it says. Return -ENOENT if no resources
found.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220709211653.18938-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On laptops like ASUS TUF Gaming A15, which have hotkeys to start Armoury
Crate or AURA Sync, these hotkeys are unavailable. This patch add
mappings for them.
Signed-off-by: Misaka19465 <misaka19465@olddoctor.net>
Link: https://lore.kernel.org/r/20220710113727.281634-1-misaka19465@olddoctor.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Commit 98f30d0ecf ("ACPI: power: Switch to sys-off handler API")
switched the ACPI sleep code from directly setting the old global
pm_power_off handler to using the new register_sys_off_handler()
mechanism with a priority of SYS_OFF_PRIO_FIRMWARE.
This is a problem in special cases where the old global pm_power_off
handler later gets overwritten, such as the Lenovo Tab2 poweroff bugfix
in x86-android-tablets. The old global pm_power_off handler gets run
with a priority of SYS_OFF_PRIO_DEFAULT which is lower then
SYS_OFF_PRIO_FIRMWARE, causing the troublesome ACPI poweroff (which
freezes the system) to run first.
Switch the registering of lenovo_yoga_tab2_830_1050_power_off over to
register_sys_off_handler() with a priority of SYS_OFF_PRIO_FIRMWARE + 1
so that it will run before acpi_power_off() to fix this.
Fixes: 98f30d0ecf ("ACPI: power: Switch to sys-off handler API")
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220708131412.81078-2-hdegoede@redhat.com
PMC driver can be supported on a new upcoming platform.
Add this information to the support list.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220630050324.3780654-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
New version of PMC controller will have a separate ACPI id, add that
to the support list.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220630050324.3780654-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On laptops like ASUS TUF Gaming A15, which have hotkeys to start Armoury
Crate or AURA Sync, these hotkeys are unavailable. This patch add
mappings for them.
Signed-off-by: Misaka19465 <misaka19465@olddoctor.net>
Link: https://lore.kernel.org/r/20220710113727.281634-1-misaka19465@olddoctor.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Commit 98f30d0ecf ("ACPI: power: Switch to sys-off handler API")
switched the ACPI sleep code from directly setting the old global
pm_power_off handler to using the new register_sys_off_handler()
mechanism with a priority of SYS_OFF_PRIO_FIRMWARE.
This is a problem in special cases where the old global pm_power_off
handler later gets overwritten, such as the Lenovo Tab2 poweroff bugfix
in x86-android-tablets. The old global pm_power_off handler gets run
with a priority of SYS_OFF_PRIO_DEFAULT which is lower then
SYS_OFF_PRIO_FIRMWARE, causing the troublesome ACPI poweroff (which
freezes the system) to run first.
Switch the registering of lenovo_yoga_tab2_830_1050_power_off over to
register_sys_off_handler() with a priority of SYS_OFF_PRIO_FIRMWARE + 1
so that it will run before acpi_power_off() to fix this.
Fixes: 98f30d0ecf ("ACPI: power: Switch to sys-off handler API")
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220708131412.81078-2-hdegoede@redhat.com
PMC driver can be supported on a new upcoming platform.
Add this information to the support list.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220630050324.3780654-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
New version of PMC controller will have a separate ACPI id, add that
to the support list.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220630050324.3780654-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add PCI error recovery support for Intel PMT driver to recover
from PCI fatal errors
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: David E Box <david.e.box@intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@linux.intel.com>
Link: https://lore.kernel.org/r/20220629221334.434307-5-gayatri.kammela@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Use the telem_type and the fixed block guid to determine if an entry is a
fixed region. For certain platforms we don't support this.
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@linux.intel.com>
Link: https://lore.kernel.org/r/20220629221334.434307-4-gayatri.kammela@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add Raptor Lake support to Intel's PMT driver.
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@linux.intel.com>
Link: https://lore.kernel.org/r/20220629221334.434307-3-gayatri.kammela@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In the Intel VSEC PCI driver, use a new VSEC_QUIRK_EARLY_HW flag in
driver_data to indicate the need for early hardware quirks in
auxiliary devices. Remove the separate PCI ID list maintained by the
Intel PMT auxiliary driver.
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@linux.intel.com>
Link: https://lore.kernel.org/r/20220629221334.434307-2-gayatri.kammela@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On a multiple package system using Sub-NUMA clustering, there is an issue
in mapping Linux CPU number to PUNIT PCI device when manufacturer decided
to reuse the PCI bus number across packages. Bus number can be reused as
long as they are in different domain or segment. In this case some CPU
will fail to find a PCI device to issue SST requests.
When bus numbers are reused across CPU packages, we are using proximity
information by matching CPU numa node id to PUNIT PCI device numa node
id. But on a package there can be only one PUNIT PCI device, but multiple
numa nodes (one for each sub cluster). So, the numa node ID of the PUNIT
PCI device can only match with one numa node id of CPUs in a sub cluster
in the package.
Since there can be only one PUNIT PCI device per package, if we match
with numa node id of any sub cluster in that package, we can use that
mapping for any CPU in that package. So, store the match information
in a per package data structure and return the information when there
is no match.
While here, use defines for max bus number instead of hardcoding.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20220629194817.2418240-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Update the copyright of various Surface drivers to the current year.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220624205800.1355621-4-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Split out subsystem device hub drivers into their own module. This
allows us to load the hub drivers separately from the registry, which
will help future DT/OF support.
While doing so, also remove a small bit of code duplication.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220624205800.1355621-3-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Move helper functions for client device registration to the core module.
This simplifies addition of future DT/OF support and also allows us to
split out the device hub drivers into their own module.
At the same time, also improve device node validation a bit by not
silently skipping devices with invalid device UID specifiers. Further,
ensure proper lifetime management for the firmware/software nodes
associated with the added devices.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220624205800.1355621-2-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add a POS subsystem tablet-mode switch device for the Surface Laptop
Studio. The respective driver for this device provides SW_TABLET_MODE
input events for user-space based on the posture of the screen.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220624183642.910893-5-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add a KIP subsystem tablet-mode switch device for the Surface Pro 8.
The respective driver for this device provides SW_TABLET_MODE input
events for user-space based on the state of the keyboard cover (e.g.
detached, folded-back, normal/laptop mode).
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220624183642.910893-4-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add a driver providing a tablet-mode switch input device for Microsoft
Surface devices using the Surface Aggregator KIP subsystem (to manage
detachable peripherals) or POS subsystem (to obtain device posture
information).
The KIP (full name unknown, abbreviation found through reverse
engineering) subsystem is used on the Surface Pro 8 and Surface Pro X to
manage the keyboard cover. Among other things, it provides information
on the positioning (posture) of the cover (closed, laptop-style,
detached, folded-back, ...), which can be used to implement an input
device providing the SW_TABLET_MODE event. Similarly, the POS (posture
information) subsystem provides such information on the Surface Laptop
Studio, with the difference being that the keyboard is not detachable.
As implementing the tablet-mode switch for both subsystems is largely
similar, the driver proposed in this commit, in large, acts as a generic
tablet mode switch driver framework for the Surface Aggregator Module.
Specific implementations using this framework are provided for the KIP
and POS subsystems, adding tablet-mode switch support to the
aforementioned devices.
A few more notes on the Surface Laptop Studio:
A peculiarity of the Surface Laptop Studio is its "slate/tent" mode
(symbolized: user> _/\). In this mode, the screen covers the keyboard
but leaves the touchpad exposed. This is essentially a mode in-between
tablet and laptop, and it is debatable whether tablet-mode should be
enabled in this mode. We therefore let the user decide this via a module
parameter.
In particular, tablet-mode may bring up the on-screen touch keyboard
more easily, which would be desirable in this mode. However, some
user-space software currently also decides to disable keyboard and, more
importantly, touchpad input, while the touchpad is still accessible in
the "slate/tent" mode. Furthermore, this mode shares its identifier with
"slate/flipped" mode where the screen is flipped 180° and the keyboard
points away from the user (symbolized: user> /_). In this mode we would
like to enable auto-rotation, something that user-space software may
only do when tablet-mode is enabled. We therefore default to the
slate-mode enabling the tablet-mode switch.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220624183642.910893-3-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Highlights:
- thinkpad_acpi/ideapad-laptop: mem-leak and platform-profile fixes
- panasonic-laptop: missing hotkey presses regression fix
- some hardware-id additions
- some other small fixes
The following is an automated git shortlog grouped by driver:
ACPI:
- video: Change how we determine if brightness key-presses are handled
hp-wmi:
- Ignore Sanitization Mode event
ideapad-laptop:
- Add Ideapad 5 15ITL05 to ideapad_dytc_v4_allow_table[]
- Add allow_v4_dytc module parameter
intel/pmc:
- Add Alder Lake N support to PMC core driver
panasonic-laptop:
- filter out duplicate volume up/down/mute keypresses
- don't report duplicate brightness key-presses
- revert "Resolve hotkey double trigger bug"
- sort includes alphabetically
- de-obfuscate button codes
platform/mellanox:
- nvsw-sn2201: fix error code in nvsw_sn2201_create_static_devices()
thinkpad_acpi:
- profile capabilities as integer
- do not use PSC mode on Intel platforms
- Fix a memory leak of EFCH MMIO resource
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmK8MBYUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9yFPwf/YtwMKIJL671UrhpZsUnMN3fPXtL7
glN+kfmWULZc1Pf8WuSPzDyQAwbs7DVw4zxqqZClOvL8H45G8hHfikHPJq8zsLGG
NKCOHsUcIzY05dGlKHyHGh9BjrwW1iTz9GN2aSc9/eCLTo0rBpOXOFaTKXg+O1hL
4pDvs1DxRhJW0uf6vRPGSHhhVEu3c6y4FM6E2I/Y4H33QAZTMmtvLzdksPYVKu7y
BoMIZ33cL82HjIxrTyoHjJlipDVjiKRHmaqn3c1lDd6hnSORlJ2tK72w010IGwl4
+v2CZ8xtP5+NMN4XOf05tkg+sGcYrSgrc1MnOgiuijhWH+5UigsAqYFX4g==
=dJgq
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- thinkpad_acpi/ideapad-laptop: mem-leak and platform-profile fixes
- panasonic-laptop: missing hotkey presses regression fix
- some hardware-id additions
- some other small fixes
* tag 'platform-drivers-x86-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: hp-wmi: Ignore Sanitization Mode event
platform/x86: thinkpad_acpi: do not use PSC mode on Intel platforms
platform/x86: thinkpad-acpi: profile capabilities as integer
platform/x86: panasonic-laptop: filter out duplicate volume up/down/mute keypresses
platform/x86: panasonic-laptop: don't report duplicate brightness key-presses
platform/x86: panasonic-laptop: revert "Resolve hotkey double trigger bug"
platform/x86: panasonic-laptop: sort includes alphabetically
platform/x86: panasonic-laptop: de-obfuscate button codes
ACPI: video: Change how we determine if brightness key-presses are handled
platform/x86: ideapad-laptop: Add Ideapad 5 15ITL05 to ideapad_dytc_v4_allow_table[]
platform/x86: ideapad-laptop: Add allow_v4_dytc module parameter
platform/x86: thinkpad_acpi: Fix a memory leak of EFCH MMIO resource
platform/mellanox: nvsw-sn2201: fix error code in nvsw_sn2201_create_static_devices()
platform/x86: intel/pmc: Add Alder Lake N support to PMC core driver
After system resume the hp-wmi driver may complain:
[ 702.620180] hp_wmi: Unknown event_id - 23 - 0x0
According to HP it means 'Sanitization Mode' and it's harmless to just
ignore the event.
Cc: Jorge Lopez <jorge.lopez2@hp.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20220628123726.250062-1-kai.heng.feng@canonical.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
PSC platform profile mode is only supported on Linux for AMD platforms.
Some older Intel platforms (e.g T490) are advertising it's capability
as Windows uses it - but on Linux we should only be using MMC profile
for Intel systems.
Add a check to prevent it being enabled incorrectly.
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20220627181449.3537-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently the active mode (PSC/MMC) is stored in an enum and queried
throughout the driver.
Other driver changes will enumerate additional submodes that are relevant
to be tracked, so instead track PSC/MMC in a single integer variable.
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20220603170212.164963-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
After system resume the hp-wmi driver may complain:
[ 702.620180] hp_wmi: Unknown event_id - 23 - 0x0
According to HP it means 'Sanitization Mode' and it's harmless to just
ignore the event.
Cc: Jorge Lopez <jorge.lopez2@hp.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20220628123726.250062-1-kai.heng.feng@canonical.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
PSC platform profile mode is only supported on Linux for AMD platforms.
Some older Intel platforms (e.g T490) are advertising it's capability
as Windows uses it - but on Linux we should only be using MMC profile
for Intel systems.
Add a check to prevent it being enabled incorrectly.
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20220627181449.3537-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On some Panasonic models the volume up/down/mute keypresses get
reported both through the Panasonic ACPI HKEY interface as well as
through the atkbd device.
Filter out the atkbd scan-codes for these to avoid reporting presses
twice.
Note normally we would leave the filtering of these to userspace by mapping
the scan-codes to KEY_UNKNOWN through /lib/udev/hwdb.d/60-keyboard.hwdb.
However in this case that would cause regressions since we were filtering
the Panasonic ACPI HKEY events before, so filter these in the kernel.
Fixes: ed83c91718 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug")
Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com>
Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220624112340.10130-7-hdegoede@redhat.com
The brightness key-presses might also get reported by the ACPI video bus,
check for this and in this case don't report the presses to avoid reporting
2 presses for a single key-press.
Fixes: ed83c91718 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug")
Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com>
Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220624112340.10130-6-hdegoede@redhat.com
In hindsight blindly throwing away most of the key-press events is not
a good idea. So revert commit ed83c91718 ("platform/x86:
panasonic-laptop: Resolve hotkey double trigger bug").
Fixes: ed83c91718 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug")
Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com>
Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220624112340.10130-5-hdegoede@redhat.com
Sort includes alphabetically, small cleanup patch in preparation of
further changes.
Fixes: ed83c91718 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220624112340.10130-4-hdegoede@redhat.com
In the definition of panasonic_keymap[] the key codes are given in
decimal, later checks are done with hexadecimal values, which does
not help in understanding the code.
Additionally use two helper variables to shorten the code and make
the logic more obvious.
Fixes: ed83c91718 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug")
Signed-off-by: Stefan Seyfried <seife+kernel@b1-systems.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220624112340.10130-3-hdegoede@redhat.com
Use acpi_video_get_backlight_type() to determine if we should register
the panasonic specific backlight interface. To avoid registering this
on systems where the ACPI or GPU native backlight control methods
should be used instead.
Tested-by: Stefan Seyfried <seife+kernel@b1-systems.com>
Tested-by: Kenneth Chan <kenneth.t.chan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220624112340.10130-8-hdegoede@redhat.com
On some Panasonic models the volume up/down/mute keypresses get
reported both through the Panasonic ACPI HKEY interface as well as
through the atkbd device.
Filter out the atkbd scan-codes for these to avoid reporting presses
twice.
Note normally we would leave the filtering of these to userspace by mapping
the scan-codes to KEY_UNKNOWN through /lib/udev/hwdb.d/60-keyboard.hwdb.
However in this case that would cause regressions since we were filtering
the Panasonic ACPI HKEY events before, so filter these in the kernel.
Fixes: ed83c91718 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug")
Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com>
Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220624112340.10130-7-hdegoede@redhat.com
The brightness key-presses might also get reported by the ACPI video bus,
check for this and in this case don't report the presses to avoid reporting
2 presses for a single key-press.
Fixes: ed83c91718 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug")
Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com>
Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220624112340.10130-6-hdegoede@redhat.com
In hindsight blindly throwing away most of the key-press events is not
a good idea. So revert commit ed83c91718 ("platform/x86:
panasonic-laptop: Resolve hotkey double trigger bug").
Fixes: ed83c91718 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug")
Reported-and-tested-by: Stefan Seyfried <seife+kernel@b1-systems.com>
Reported-and-tested-by: Kenneth Chan <kenneth.t.chan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220624112340.10130-5-hdegoede@redhat.com
Sort includes alphabetically, small cleanup patch in preparation of
further changes.
Fixes: ed83c91718 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220624112340.10130-4-hdegoede@redhat.com
In the definition of panasonic_keymap[] the key codes are given in
decimal, later checks are done with hexadecimal values, which does
not help in understanding the code.
Additionally use two helper variables to shorten the code and make
the logic more obvious.
Fixes: ed83c91718 ("platform/x86: panasonic-laptop: Resolve hotkey double trigger bug")
Signed-off-by: Stefan Seyfried <seife+kernel@b1-systems.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220624112340.10130-3-hdegoede@redhat.com
Unlike release_mem_region(), a call to release_resource() does not
free the resource, so it has to be freed explicitly to avoid a memory
leak.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 455cd867b8 ("platform/x86: thinkpad_acpi: Add a s2idle resume quirk for a number of laptops")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220621155511.5b266395@endymion.delvare
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This should return PTR_ERR() instead of IS_ERR(). Also "dev->client"
has been set to NULL by this point so it returns 0/success so preserve
the error code earlier.
Fixes: 662f24826f ("platform/mellanox: Add support for new SN2201 system")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/YqmUGwmPK7cPolk/@kili
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add Alder Lake N (ADL-N) to the list of the platforms that Intel's
PMC core driver supports. Alder Lake N reuses all the TigerLake PCH IPs.
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@linux.intel.com>
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Link: https://lore.kernel.org/r/20220615002751.3371730-1-gayatri.kammela@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Unlike release_mem_region(), a call to release_resource() does not
free the resource, so it has to be freed explicitly to avoid a memory
leak.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 455cd867b8 ("platform/x86: thinkpad_acpi: Add a s2idle resume quirk for a number of laptops")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220621155511.5b266395@endymion.delvare
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
platform/x86/dell/Kconfig is only sourced if X86_PLATFORM_DEVICES is set,
so it does not need to depend on it.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220620145628.5882-3-hdegoede@redhat.com
drivers/platform/x86/Kconfig is wrapped in one big
if X86_PLATFORM_DEVICES .. endif and X86_PLATFORM_DEVICES already
has a "depends on X86" so the "if X86" in drivers/platform/Kconfig
is not necessary and except for MIPS none of the other includes
there has such an if. So let's remove it.
While at it also move the x86/Kconfig include to the end of the file
for alphabetical sorting.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220620145628.5882-2-hdegoede@redhat.com
ACER_WMI already depends on ACPI_WMI which depends on ACPI
so the "depends on ACPI" is unnecessary.
And since ACER_WMI already depends on ACPI adding an "if ACPI"
to the ACPI_VIDEO select is nonsense.
While at it also group all the selects together.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220620145628.5882-1-hdegoede@redhat.com
It's quite hard to understand in that zillions of headers that are included
if any specific one is already listed. Sort headers for better maintenance.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220616224951.66660-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This should return PTR_ERR() instead of IS_ERR(). Also "dev->client"
has been set to NULL by this point so it returns 0/success so preserve
the error code earlier.
Fixes: 662f24826f ("platform/mellanox: Add support for new SN2201 system")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/YqmUGwmPK7cPolk/@kili
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add Alder Lake N (ADL-N) to the list of the platforms that Intel's
PMC core driver supports. Alder Lake N reuses all the TigerLake PCH IPs.
Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Gayatri Kammela <gayatri.kammela@linux.intel.com>
Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Link: https://lore.kernel.org/r/20220615002751.3371730-1-gayatri.kammela@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
With the introduction of the Surface Laptop Studio, more event- and
target categories have been added. Therefore, increase the number of
reserved events and extend the enum of know target categories to
accommodate this.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220614194117.4118897-1-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Use local wq in order to avoid flush_scheduled_work() usage.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Tested-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/63ec2d45-c67c-1134-f6d3-490c8ba67a01@I-love.SAKURA.ne.jp
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently, AMD supported platform drivers are grouped under generic "x86"
folder structure. Move the current drivers (amd-pmc and amd_hsmp) to a
separate directory. This would also mean the newer driver submissions to
pdx86 subsystem in the future will also land in AMD specific directory.
Reviewed-by: Naveen Krishna Chatradhi <NaveenKrishna.Chatradhi@amd.com>
Tested-by: Suma Hegde <suma.hegde@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220608193212.2827257-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Instead of retrieving the backlight brightness in struct
backlight_properties manually, and then checking whether the backlight
should be on at all, use backlight_get_brightness() which does all
this and insulates this from future changes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: ibm-acpi-devel@lists.sourceforge.net
Cc: platform-driver-x86@vger.kernel.org
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20220607184635.1127913-5-steve@sk2.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Instead of manually checking the power state in struct
backlight_properties, use backlight_is_blank().
Signed-off-by: Stephen Kitt <steve@sk2.org>
Cc: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: platform-driver-x86@vger.kernel.org
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20220607184635.1127913-4-steve@sk2.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Instead of retrieving the backlight brightness in struct
backlight_properties manually, and then checking whether the backlight
should be on at all, use backlight_get_brightness() which does all
this and insulates this from future changes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: platform-driver-x86@vger.kernel.org
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20220607184635.1127913-3-steve@sk2.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Instead of retrieving the backlight brightness in struct
backlight_properties manually, and then checking whether the backlight
should be on at all, use backlight_get_brightness() which does all
this and insulates this from future changes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Cc: "Lee, Chun-Yi" <jlee@suse.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: platform-driver-x86@vger.kernel.org
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20220607184635.1127913-2-steve@sk2.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
By default the ACPI platform profile starts in balanced mode.
On supported systems AMT is supposed to be enabled in balanced
mode by default.
When checking the capabilities during initialization, set up AMT to be
enabled if it's supported.
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20220603170212.164963-4-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On some AMD platforms if you press FN+T it will toggle whether automatic
mode transitions are active.
Recognize this keycode and use it to toggle AMT.
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20220603170212.164963-3-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Some AMD Thinkpads support automatic mode transitions. The actual
transition logic doesn't live in the `thinkpad_acpi` driver. The events
to activate this logic come from this driver though.
Populate these events when switching PSC power modes.
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20220603170212.164963-2-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently the active mode (PSC/MMC) is stored in an enum and queried
throughout the driver.
Other driver changes will enumerate additional submodes that are relevant
to be tracked, so instead track PSC/MMC in a single integer variable.
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20220603170212.164963-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Instead of walking the list of children of an ACPI device directly,
use acpi_dev_for_each_child() to carry out an action for all of
the given ACPI device's children.
This will help to eliminate the children list head from struct
acpi_device as it is redundant and it is used in questionable ways
in some places (in particular, locking is needed for walking the
list pointed to it safely, but it is often missing).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The last resume result exposing logic in cros_ec_sleep_event()
incorrectly requires S0ix support, which doesn't work on ARM based
systems where S0ix doesn't exist. That's because cros_ec_sleep_event()
only reports the last resume result when the EC indicates the last sleep
event was an S0ix resume. On ARM systems, the last sleep event is always
S3 resume, but the EC can still detect sleep hang events in case some
other part of the AP is blocking sleep.
Always expose the last resume result if the EC supports it so that this
works on all devices regardless of S0ix support. This fixes sleep hang
detection on ARM based chromebooks like Trogdor.
Cc: Rajat Jain <rajatja@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Fixes: 7235560ac7 ("platform/chrome: Add support for v1 of host sleep event")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220614075726.2729987-1-swboyd@chromium.org
Add support for the detachable keyboard cover on the Surface Pro 8.
The keyboard cover on the Surface Pro 8 is, unlike the keyboard covers
of earlier Surface Pro generations, handled via the Surface System
Aggregator Module (SSAM). The keyboard and touchpad (as well as other
HID input devices) of this cover are standard SSAM HID client devices
(just like keyboard and touchpad on e.g. the Surface Laptop 3 and 4),
however, some care needs to be taken as they can be physically detached
(similarly to the Surface Book 3). Specifically, the respective SSAM
client devices need to be removed when the keyboard cover has been
detached and (re-)initialized when the keyboard cover has been
(re-)attached.
On the Surface Pro 8, detachment of the keyboard cover (and by extension
its devices) is managed via the KIP subsystem. Therefore, said devices
need to be registered under the KIP device hub, which in turn will
remove and re-create/re-initialize those devices as needed.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220527023447.2460025-13-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add a Surface System Aggregator Module (SSAM) client device hub for
hot-removable devices managed via the KIP subsystem.
The KIP subsystem (full name unknown, abbreviation has been obtained
through reverse engineering) is a subsystem that manages hot-removable
SSAM client devices. Specifically, it manages HID input devices
contained in the detachable keyboard cover of the Surface Pro 8 and
Surface Pro X.
The KIP subsystem handles a single group of devices (e.g. all devices
contained in the keyboard cover) and cannot handle devices individually.
Thus we model it as a client device hub, which (hot-)removes all devices
contained under it once removal of the hub (e.g. keyboard cover) has
been detected and (re-)adds all devices once the physical hub device has
been (re-)attached. To do this, use the previously generified SSAM
subsystem hub framework.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220527023447.2460025-12-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Use the target category of the (base) hub as instance id in the
(virtual) hub device UID. This makes association of the hub with the
respective subsystem easier.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220527023447.2460025-11-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The Surface System Aggregator Module (SSAM) has multiple subsystems that
can manage detachable devices. At the moment, we only support the "base"
(BAS/0x11) subsystem, which is used on the Surface Book 3 to manage
devices (including keyboard, touchpad, and secondary battery) connected
to the base of the device.
The Surface Pro 8 has a new type-cover with keyboard and touchpad, which
is managed via the KIP/0x0e subsystem. The general procedure is the
same, but with slightly different events and setup. To make
implementation of the KIP hub easier and prevent duplication, generify
the parts of the base hub that we can use for the KIP hub (or any
potential future subsystem hubs).
This also switches over to use the newly introduced "hot-remove"
functionality, which should prevent communication issues when devices
have been detached.
Lastly, also drop the undocumented and unused sysfs "state" attribute of
the base hub. It has at best been useful for debugging.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220527023447.2460025-10-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Use newly introduced client device wrapper functions for notifier
registration and unregistration.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220527023447.2460025-5-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When SSAM client devices have been (physically) hot-removed,
communication attempts with those devices may fail and time out. This
can even extend to event notifiers, due to which timeouts may occur
during device removal, slowing down that process.
Add a parameter to the notifier unregister function that allows skipping
communication with the EC to prevent this. Furthermore, add wrappers for
registering and unregistering notifiers belonging to SSAM client devices
that automatically check if the device has been marked as hot-removed
and communication should be avoided.
Note that non-SSAM client devices can generally not be hot-removed, so
also add a convenience wrapper for those, defaulting to allow
communication.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220527023447.2460025-4-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Highlights:
- Fix hp-wmi regression on HP Omen laptops introduced in 5.18
- Several hardware-id additions
- A couple of other tiny fixes
The following is an automated git shortlog grouped by driver:
barco-p50-gpio:
- Add check for platform_driver_register
gigabyte-wmi:
- Add support for B450M DS3H-CF
- Add Z690M AORUS ELITE AX DDR4 support
hp-wmi:
- Use zero insize parameter only when supported
- Resolve WMI query failures on some devices
platform/mellanox:
- Add static in struct declaration.
- Spelling s/platfom/platform/
platform/x86/intel:
- hid: Add Surface Go to VGBS allow list
- pmc: Support Intel Raptorlake P
- Fix pmt_crashlog array reference
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmKl3+0UHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zU3wf/YJUH3Obp0kAUssrOxT9QShHH6iFL
Gh6CN38DYLEbV7FNBH/iA+ZW7DSsymQm1M3jj1QYB0Sd2X/hSsUEh2q6F0XNjTKH
X8vVrSRAL+DStpgyKerBJHKpzO3ESUlipmIvR/JuGVHQAylR8ielHvAx+XhA1PKz
8/ezppIa9bxZ1+LwQNPE40jJv+wlNctGrx3TEwqPep3STWWFEjkeYpR+3XIJ4Ads
5P7FXxpM2cRFKBcI9jVIBDMIZulEfkXxBDcLCHOYYitxcpnrFFghn14ys5Exh9zL
pdaVHnlP6pEFpVhCWa/ICpSyrLhNYqTUJ92dyFeakbGBj9QlwnfeceMLAw==
=SaRl
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Highlights:
- Fix hp-wmi regression on HP Omen laptops introduced in 5.18
- Several hardware-id additions
- A couple of other tiny fixes"
* tag 'platform-drivers-x86-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel: hid: Add Surface Go to VGBS allow list
platform/x86: hp-wmi: Use zero insize parameter only when supported
platform/x86: hp-wmi: Resolve WMI query failures on some devices
platform/x86: gigabyte-wmi: Add support for B450M DS3H-CF
platform/x86: gigabyte-wmi: Add Z690M AORUS ELITE AX DDR4 support
platform/x86: barco-p50-gpio: Add check for platform_driver_register
platform/x86/intel: pmc: Support Intel Raptorlake P
platform/x86/intel: Fix pmt_crashlog array reference
platform/mellanox: Add static in struct declaration.
platform/mellanox: Spelling s/platfom/platform/
The def_bool y PMC_ATOM Kconfig option provides a couple of symbols used
by the code enabled by the X86_INTEL_LPSS option and it registers some
clocks. These clocks are only registered on Bay Trail, Cherry Trail and
Brasswell Intel SoCs and kernels targeting these SoCs must always have
the X86_INTEL_LPSS option enabled otherwise many things will not work.
Building the PMC_ATOM code on kernels which are not targeting the
mentioned SoCs and which do not have the X86_INTEL_LPSS enabled is
not useful.
This means that we can simplify things by replacing the PMC_ATOM Kconfig
option in Makefiles with X86_INTEL_LPSS and then drop the option.
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220503140207.101218-2-hdegoede@redhat.com
The Surface Go reports Chassis Type 9 (Laptop,) so the device needs to be
added to dmi_vgbs_allow_list to enable tablet mode when an attached Type
Cover is folded back.
BugLink: https://github.com/linux-surface/linux-surface/issues/837
Signed-off-by: Duke Lee <krnhotwings@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220607213654.5567-1-krnhotwings@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
commit be9d73e649 ("platform/x86: hp-wmi: Fix 0x05 error code reported by
several WMI calls") and commit 12b19f14a2 ("platform/x86: hp-wmi: Fix
hp_wmi_read_int() reporting error (0x05)") cause ACPI BIOS Error (bug):
Attempt to CreateField of length zero (20211217/dsopcode-133) because of
the ACPI method HWMC, which unconditionally creates a Field of
size (insize*8) bits:
CreateField (Arg1, 0x80, (Local5 * 0x08), DAIN)
In cases where args->insize = 0, the Field size is 0, resulting in
an error.
Fix this by using zero insize only if 0x5 error code is returned
Tested on Omen 15 AMD (2020) board ID: 8786.
Fixes: be9d73e649 ("platform/x86: hp-wmi: Fix 0x05 error code reported by several WMI calls")
Signed-off-by: Bedant Patnaik <bedant.patnaik@gmail.com>
Tested-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://lore.kernel.org/r/41be46743d21c78741232a47bbb5f1cdbcc3d21e.camel@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
WMI queries fail on some devices where the ACPI method HWMC
unconditionally attempts to create Fields beyond the buffer
if the buffer is too small, this breaks essential features
such as power profiles:
CreateByteField (Arg1, 0x10, D008)
CreateByteField (Arg1, 0x11, D009)
CreateByteField (Arg1, 0x12, D010)
CreateDWordField (Arg1, 0x10, D032)
CreateField (Arg1, 0x80, 0x0400, D128)
In cases where args->data had zero length, ACPI BIOS Error
(bug): AE_AML_BUFFER_LIMIT, Field [D008] at bit
offset/length 128/8 exceeds size of target Buffer (128 bits)
(20211217/dsopcode-198) was obtained.
ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [D009] at bit
offset/length 136/8 exceeds size of target Buffer (136bits)
(20211217/dsopcode-198)
The original code created a buffer size of 128 bytes regardless if
the WMI call required a smaller buffer or not. This particular
behavior occurs in older BIOS and reproduced in OMEN laptops. Newer
BIOS handles buffer sizes properly and meets the latest specification
requirements. This is the reason why testing with a dynamically
allocated buffer did not uncover any failures with the test systems at
hand.
This patch was tested on several OMEN, Elite, and Zbooks. It was
confirmed the patch resolves HPWMI_FAN GET/SET calls in an OMEN
Laptop 15-ek0xxx. No problems were reported when testing on several Elite
and Zbooks notebooks.
Fixes: 4b4967cbd2 ("platform/x86: hp-wmi: Changing bios_args.data to be dynamically allocated")
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220608212923.8585-2-jorge.lopez2@hp.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
As platform_driver_register() could fail, it should be better
to deal with the return value in order to maintain the code
consisitency.
Fixes: 86af1d02d4 ("platform/x86: Support for EC-connected GPIOs for identify LED/button on Barco P50 board")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Peter Korsgaard <peter.korsgaard@barco.com>
Link: https://lore.kernel.org/r/20220526090345.1444172-1-jiasheng@iscas.ac.cn
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add Raptorlake P to the list of the platforms that intel_pmc_core driver
supports for pmc_core device. Raptorlake P PCH is based on Alderlake P
PCH.
Signed-off-by: George D Sworo <george.d.sworo@intel.com>
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20220602012617.20100-1-george.d.sworo@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The probe function pmt_crashlog_probe() may incorrectly reference
the 'priv->entry array' as it uses 'i' to reference the array instead
of 'priv->num_entries' as it should. This is similar to the problem
that was addressed in pmt_telemetry_probe via commit 2cdfa0c20d
("platform/x86/intel: Fix 'rmmod pmt_telemetry' panic").
Cc: "David E. Box" <david.e.box@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David Arcari <darcari@redhat.com>
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20220526203140.339120-1-darcari@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fix problem of missing static in struct declaration.
Fixes: 662f24826f ("platform/mellanox: Add support for new SN2201 system")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20220602145103.11859-1-michaelsh@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
cros_ec_get_host_event_wake_mask() expects to receive
sizeof(struct ec_response_host_event_mask) from send_command(). The
payload is valid only if the return value is positive.
Return -EPROTO if send_command() returns 0 in
cros_ec_get_host_event_wake_mask().
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-22-tzungbi@kernel.org
cros_ec_get_host_event_wake_mask() expects to receive
sizeof(struct ec_response_host_event_mask) from send_command().
The payload is valid only if the return value is positive.
Add Kunit tests for returning 0 from send_command() in
cros_ec_get_host_event_wake_mask().
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-21-tzungbi@kernel.org
cros_ec_get_host_event_wake_mask() used to return value from
send_command() which is number of bytes for input payload on success
(i.e. sizeof(struct ec_response_host_event_mask)).
However, the callers don't need to know how many bytes are available.
Don't return number of available bytes. Instead, return 0 on success;
otherwise, negative integers on error.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-20-tzungbi@kernel.org
cros_ec_get_host_command_version_mask() expects to receive
sizeof(struct ec_response_get_cmd_versions) from send_command(). The
payload is valid only if the return value is positive.
Return -EPROTO if send_command() returns 0 in
cros_ec_get_host_command_version_mask().
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-19-tzungbi@kernel.org
cros_ec_get_host_command_version_mask() expects to receive
sizeof(struct ec_response_get_cmd_versions) from send_command().
The payload is valid only if the return value is positive.
Add Kunit tests for returning 0 from send_command() in
cros_ec_get_host_command_version_mask().
Note that because the 2 cros_ec_get_host_command_version_mask() use the
same `ver_mask`. cros_ec_proto_test_query_all_no_host_sleep_return0()
polluates the `ver_mask` and returns 0 on the second send_command() to
make sure the second cros_ec_get_host_command_version_mask() doesn't
take the garbage from the previous call.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-18-tzungbi@kernel.org
cros_ec_get_host_command_version_mask() should check if EC wasn't happy
by checking `msg->result`.
Use cros_ec_map_error() and return the error code if any.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-17-tzungbi@kernel.org
cros_ec_query_all() uses cros_ec_get_host_command_version_mask() to
query the supported MKBP version; cros_ec_get_host_command_version_mask()
uses send_command() for transferring the host command.
Returning >=0 from send_command() only denotes the transfer was success.
cros_ec_get_host_command_version_mask() should check if EC wasn't happy
by checking `msg->result`.
Add a Kunit test for returning error in `msg->result` in
cros_ec_get_host_command_version_mask(). For the case,
cros_ec_query_all() should find the EC device doesn't support MKBP.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-16-tzungbi@kernel.org
cros_ec_get_host_command_version_mask() used to return value from
send_command() which is number of available bytes for input payload on
success (i.e. sizeof(struct ec_response_get_cmd_versions)).
However, the callers don't need to know how many bytes are available.
Don't return number of available bytes. Instead, return 0 on success;
otherwise, negative integers on error.
Also remove the unneeded `ver_mask` initialization as the callers should
take it only if cros_ec_get_host_command_version_mask() returns 0.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-15-tzungbi@kernel.org
It wrongly showed the following message when it doesn't support MKBP:
"MKBP support version 4294967295".
Fix it.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-14-tzungbi@kernel.org
cros_ec_get_proto_info_legacy() expects to receive
sizeof(struct ec_response_hello) from send_command(). The payload is
valid only if the return value is positive.
Return -EPROTO if send_command() returns 0 in
cros_ec_get_proto_info_legacy().
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-13-tzungbi@kernel.org
cros_ec_get_proto_info_legacy() expects to receive
sizeof(struct ec_response_hello) from send_command(). The payload is
valid only if the return value is positive.
Add a Kunit test for returning 0 from send_command() in
cros_ec_get_proto_info_legacy().
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-12-tzungbi@kernel.org
Rename cros_ec_host_command_proto_query_v2() to
cros_ec_get_proto_info_legacy() and make it responsible for setting
`ec_dev` fields for EC protocol v2.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-11-tzungbi@kernel.org
cros_ec_get_proto_info() expects to receive
sizeof(struct ec_response_get_protocol_info) from send_command(). The
payload is valid only if the return value is positive.
Return -EPROTO if send_command() returns 0 in cros_ec_get_proto_info().
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-10-tzungbi@kernel.org
cros_ec_get_proto_info() expects to receive
sizeof(struct ec_response_get_protocol_info) from send_command(). The
payload is valid only if the return value is positive.
Add Kunit tests for returning 0 from send_command() in
cros_ec_get_proto_info().
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-9-tzungbi@kernel.org
Rename cros_ec_host_command_proto_query() to cros_ec_get_proto_info()
and make it responsible for setting `ec_dev` fields according to the
response protocol info.
Also make cros_ec_get_host_event_wake_mask() allocate its own message
buffer. It was lucky that size of `struct ec_response_host_event_mask`
is less than `struct ec_response_get_protocol_info`. Thus, the buffer
wasn't overflow.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-8-tzungbi@kernel.org
Use cros_ec_map_error() in cros_ec_get_host_event_wake_mask().
The behavior of cros_ec_get_host_event_wake_mask() slightly changed. It
is acceptable because the caller only needs it returns negative integers
for indicating errors. Especially, the EC_RES_INVALID_COMMAND still
maps to -EOPNOTSUPP.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220609084957.3684698-7-tzungbi@kernel.org
Andy Shevchenko
Greg Kroah-Hartman
Shyam Sundar S K
Evan Green
Dan Carpenter
Rustam Subkhankulov
Linus Torvalds
Prashant Malani
Lucas Tanure
Uwe Kleine-König
Michael S. Tsirkin
Maximilian Luz
Hans de Goede
Patryk Duda
Xuan Zhuo
Rafael J. Wysocki
Vadim Pasternak
Andrey Strachuk
Tzung-Bi Shih
PaddyKP_Yao
Henning Schild
Jonathan Yong
Nícolas F. R. A. Prado
Misaka19465
Pär Eriksson
Gayatri Kammela
David E. Box
Srinivas Pandruvada
Kai-Heng Feng
Mark Pearson
Stefan Seyfried
Jean Delvare
Jiang Jian
Tetsuo Handa
Stephen Kitt
Stephen Boyd
Colin Ian King
Haowen Bai
Duke Lee
Bedant Patnaik
Jorge Lopez
August Wikerfors
Piotr Chmura
Jiasheng Jiang
George D Sworo
David Arcari
Michael Shych
Geert Uytterhoeven