Граф коммитов

1343 Коммитов

Автор SHA1 Сообщение Дата
Lukas Wunner 1db58c6584 PCI: pciehp: Fix infinite loop in IRQ handler upon power fault
commit 23584c1ed3 upstream.

The Power Fault Detected bit in the Slot Status register differs from
all other hotplug events in that it is sticky:  It can only be cleared
after turning off slot power.  Per PCIe r5.0, sec. 6.7.1.8:

  If a power controller detects a main power fault on the hot-plug slot,
  it must automatically set its internal main power fault latch [...].
  The main power fault latch is cleared when software turns off power to
  the hot-plug slot.

The stickiness used to cause interrupt storms and infinite loops which
were fixed in 2009 by commits 5651c48cfa ("PCI pciehp: fix power fault
interrupt storm problem") and 99f0169c17 ("PCI: pciehp: enable
software notification on empty slots").

Unfortunately in 2020 the infinite loop issue was inadvertently
reintroduced by commit 8edf5332c3 ("PCI: pciehp: Fix MSI interrupt
race"):  The hardirq handler pciehp_isr() clears the PFD bit until
pciehp's power_fault_detected flag is set.  That happens in the IRQ
thread pciehp_ist(), which never learns of the event because the hardirq
handler is stuck in an infinite loop.  Fix by setting the
power_fault_detected flag already in the hardirq handler.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=214989
Link: https://lore.kernel.org/linux-pci/DM8PR11MB5702255A6A92F735D90A4446868B9@DM8PR11MB5702.namprd11.prod.outlook.com
Fixes: 8edf5332c3 ("PCI: pciehp: Fix MSI interrupt race")
Link: https://lore.kernel.org/r/66eaeef31d4997ceea357ad93259f290ededecfd.1637187226.git.lukas@wunner.de
Reported-by: Joseph Bao <joseph.bao@intel.com>
Tested-by: Joseph Bao <joseph.bao@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v4.19+
Cc: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-05 12:38:56 +01:00
Hans de Goede c2451a3717 PCI: pciehp: Use down_read/write_nested(reset_lock) to fix lockdep errors
commit 085a9f4343 upstream.

Use down_read_nested() and down_write_nested() when taking the
ctrl->reset_lock rw-sem, passing the number of PCIe hotplug controllers in
the path to the PCI root bus as lock subclass parameter.

This fixes the following false-positive lockdep report when unplugging a
Lenovo X1C8 from a Lenovo 2nd gen TB3 dock:

  pcieport 0000:06:01.0: pciehp: Slot(1): Link Down
  pcieport 0000:06:01.0: pciehp: Slot(1): Card not present
  ============================================
  WARNING: possible recursive locking detected
  5.16.0-rc2+ #621 Not tainted
  --------------------------------------------
  irq/124-pciehp/86 is trying to acquire lock:
  ffff8e5ac4299ef8 (&ctrl->reset_lock){.+.+}-{3:3}, at: pciehp_check_presence+0x23/0x80

  but task is already holding lock:
  ffff8e5ac4298af8 (&ctrl->reset_lock){.+.+}-{3:3}, at: pciehp_ist+0xf3/0x180

   other info that might help us debug this:
   Possible unsafe locking scenario:

	 CPU0
	 ----
    lock(&ctrl->reset_lock);
    lock(&ctrl->reset_lock);

   *** DEADLOCK ***

   May be due to missing lock nesting notation

  3 locks held by irq/124-pciehp/86:
   #0: ffff8e5ac4298af8 (&ctrl->reset_lock){.+.+}-{3:3}, at: pciehp_ist+0xf3/0x180
   #1: ffffffffa3b024e8 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pciehp_unconfigure_device+0x31/0x110
   #2: ffff8e5ac1ee2248 (&dev->mutex){....}-{3:3}, at: device_release_driver+0x1c/0x40

  stack backtrace:
  CPU: 4 PID: 86 Comm: irq/124-pciehp Not tainted 5.16.0-rc2+ #621
  Hardware name: LENOVO 20U90SIT19/20U90SIT19, BIOS N2WET30W (1.20 ) 08/26/2021
  Call Trace:
   <TASK>
   dump_stack_lvl+0x59/0x73
   __lock_acquire.cold+0xc5/0x2c6
   lock_acquire+0xb5/0x2b0
   down_read+0x3e/0x50
   pciehp_check_presence+0x23/0x80
   pciehp_runtime_resume+0x5c/0xa0
   device_for_each_child+0x45/0x70
   pcie_port_device_runtime_resume+0x20/0x30
   pci_pm_runtime_resume+0xa7/0xc0
   __rpm_callback+0x41/0x110
   rpm_callback+0x59/0x70
   rpm_resume+0x512/0x7b0
   __pm_runtime_resume+0x4a/0x90
   __device_release_driver+0x28/0x240
   device_release_driver+0x26/0x40
   pci_stop_bus_device+0x68/0x90
   pci_stop_bus_device+0x2c/0x90
   pci_stop_and_remove_bus_device+0xe/0x20
   pciehp_unconfigure_device+0x6c/0x110
   pciehp_disable_slot+0x5b/0xe0
   pciehp_handle_presence_or_link_change+0xc3/0x2f0
   pciehp_ist+0x179/0x180

This lockdep warning is triggered because with Thunderbolt, hotplug ports
are nested. When removing multiple devices in a daisy-chain, each hotplug
port's reset_lock may be acquired recursively. It's never the same lock, so
the lockdep splat is a false positive.

Because locks at the same hierarchy level are never acquired recursively, a
per-level lockdep class is sufficient to fix the lockdep warning.

The choice to use one lockdep subclass per pcie-hotplug controller in the
path to the root-bus was made to conserve class keys because their number
is limited and the complexity grows quadratically with number of keys
according to Documentation/locking/lockdep-design.rst.

Link: https://lore.kernel.org/linux-pci/20190402021933.GA2966@mit.edu/
Link: https://lore.kernel.org/linux-pci/de684a28-9038-8fc6-27ca-3f6f2f6400d7@redhat.com/
Link: https://lore.kernel.org/r/20211217141709.379663-1-hdegoede@redhat.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208855
Reported-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27 11:05:13 +01:00
Niklas Schnelle a46044a92a s390/pci: fix zpci_zdev_put() on reserve
Since commit 2a671f77ee ("s390/pci: fix use after free of zpci_dev")
the reference count of a zpci_dev is incremented between
pcibios_add_device() and pcibios_release_device() which was supposed to
prevent the zpci_dev from being freed while the common PCI code has
access to it. It was missed however that the handling of zPCI
availability events assumed that once zpci_zdev_put() was called no
later availability event would still see the device. With the previously
mentioned commit however this assumption no longer holds and we must
make sure that we only drop the initial long-lived reference the zPCI
subsystem holds exactly once.

Do so by introducing a zpci_device_reserved() function that handles when
a device is reserved. Here we make sure the zpci_dev will not be
considered for further events by removing it from the zpci_list.

This also means that the device actually stays in the
ZPCI_FN_STATE_RESERVED state between the time we know it has been
reserved and the final reference going away. We thus need to consider it
a real state instead of just a conceptual state after the removal. The
final cleanup of PCI resources, removal from zbus, and destruction of
the IOMMU stays in zpci_release_device() to make sure holders of the
reference do see valid data until the release.

Fixes: 2a671f77ee ("s390/pci: fix use after free of zpci_dev")
Cc: stable@vger.kernel.org
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-10-04 09:49:10 +02:00
Bjorn Helgaas e210d9fc09 Merge branch 'pci/reset'
- Cache PCIe Device Capabilities register (Amey Narkhede)

- Add pcie_reset_flr() with 'probe' argument (Amey Narkhede)

- Add pdev->reset_methods[] array to track reset method ordering (Amey
  Narkhede)

- Remove reset_fn field from pci_dev (Amey Narkhede)

- Add sysfs interface to query and set device reset mechanism (Amey
  Narkhede)

- Add pci_set_acpi_fwnode() to set ACPI_COMPANION (Shanker Donthineni)

- Use acpi_pci_power_manageable() instead of duplicating logic (Shanker
  Donthineni)

- Set ACPI fwnode early and at the same time with OF (Shanker Donthineni)

- Add support for ACPI _RST reset method (Shanker Donthineni)

- Change reset function 'probe' argument to bool (Amey Narkhede)

* pci/reset:
  PCI: Change the type of probe argument in reset functions
  PCI: Add support for ACPI _RST reset method
  PCI: Setup ACPI fwnode early and at the same time with OF
  PCI: Use acpi_pci_power_manageable()
  PCI: Add pci_set_acpi_fwnode() to set ACPI_COMPANION
  PCI: Allow userspace to query and set device reset mechanism
  PCI: Remove reset_fn field from pci_dev
  PCI: Add array to track reset method ordering
  PCI: Add pcie_reset_flr() with 'probe' argument
  PCI: Cache PCIe Device Capabilities register
2021-09-02 14:56:42 -05:00
Vishal Aslot faa2e05ad0 PCI: ibmphp: Fix double unmap of io_mem
ebda_rsrc_controller() calls iounmap(io_mem) on the error path. Its caller,
ibmphp_access_ebda(), also calls iounmap(io_mem) on good and error paths.

Remove the iounmap(io_mem) invocation from ebda_rsrc_controller().

[bhelgaas: remove item from TODO]
Link: https://lore.kernel.org/r/20210818165751.591185-1-os.vaslot@gmail.com
Signed-off-by: Vishal Aslot <os.vaslot@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-09-02 12:02:50 -05:00
Amey Narkhede 9bdc81ce44 PCI: Change the type of probe argument in reset functions
Change the type of probe argument in functions which implement reset
methods from int to bool to make the context and intent clear.

Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Link: https://lore.kernel.org/r/20210817180500.1253-10-ameynarkhede03@gmail.com
Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-18 17:32:42 -05:00
Bjorn Helgaas 4343292f80 Merge branch 'pci/kernel-doc'
- Fix kernel-doc formatting errors (Krzysztof Wilczyński)

* pci/kernel-doc:
  PCI: Fix kernel-doc formatting
2021-07-06 10:56:29 -05:00
Bjorn Helgaas 7132700067 Merge branch 'pci/sysfs'
- Fix dsm_label_utf16s_to_utf8s() buffer overrun (Krzysztof Wilczyński)

- Use sysfs_emit() and sysfs_emit_at() in "show" functions (Krzysztof
  Wilczyński)

- Fix 'resource_alignment' newline issues (Krzysztof Wilczyński)

- Add newline to 'devspec' sysfs file (Krzysztof Wilczyński)

* pci/sysfs:
  PCI/sysfs: Add 'devspec' newline
  PCI/sysfs: Fix 'resource_alignment' newline issues
  PCI/sysfs: Use sysfs_emit() and sysfs_emit_at() in "show" functions
  PCI/sysfs: Rely on lengths from scnprintf(), dsm_label_utf16s_to_utf8s()
  PCI/sysfs: Fix dsm_label_utf16s_to_utf8s() buffer overrun

# Conflicts:
#	drivers/pci/p2pdma.c
2021-07-06 10:56:25 -05:00
Krzysztof Wilczyński 347269c113 PCI: Fix kernel-doc formatting
Fix kernel-doc formatting throughout drivers/pci and related include files.
No change to functionality intended.

Check for warnings:

  $ find include drivers/pci -type f -path "*pci*.[ch]" | xargs scripts/kernel-doc -none

[bhelgaas: squashed to one commit]
Link: https://lore.kernel.org/r/20210509030237.368540-1-kw@linux.com
Link: https://lore.kernel.org/r/20210703151306.1922450-1-kw@linux.com
Link: https://lore.kernel.org/r/20210703151306.1922450-2-kw@linux.com
Link: https://lore.kernel.org/r/20210703151306.1922450-3-kw@linux.com
Link: https://lore.kernel.org/r/20210703151306.1922450-4-kw@linux.com
Link: https://lore.kernel.org/r/20210703151306.1922450-5-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-07-06 10:37:46 -05:00
Krzysztof Wilczyński 6d71cc4c91 PCI: cpcihp: Declare cpci_debug in header file
cpci_debug is declared as a global variable in cpci_hotplug_core.c and used
in cpci_hotplug_pci.c via an "extern".  Add an extern declaration in the
header file.

Resolves the following sparse warning:

  drivers/pci/hotplug/cpci_hotplug_core.c:47:5: warning: symbol 'cpci_debug' was not declared. Should it be static?

Link: https://lore.kernel.org/r/20210701184306.1492003-1-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-07-01 15:32:45 -05:00
Lukas Wunner a97396c6eb PCI: pciehp: Ignore Link Down/Up caused by DPC
Downstream Port Containment (PCIe r5.0, sec. 6.2.10) disables the link upon
an error and attempts to re-enable it when instructed by the DPC driver.

A slot which is both DPC- and hotplug-capable is currently powered off by
pciehp once DPC is triggered (due to the link change) and powered back up
on successful recovery.  That's undesirable, the slot should remain powered
so the hotplugged device remains bound to its driver.  DPC notifies the
driver of the error and of successful recovery in pcie_do_recovery() and
the driver may then restore the device to working state.

Moreover, Sinan points out that turning off slot power by pciehp may foil
recovery by DPC:  Power off/on is a cold reset concurrently to DPC's warm
reset.  Sathyanarayanan reports extended delays or failure in link
retraining by DPC if pciehp brings down the slot.

Fix by detecting whether a Link Down event is caused by DPC and awaiting
recovery if so.  On successful recovery, ignore both the Link Down and the
subsequent Link Up event.

Afterwards, check whether the link is down to detect surprise-removal or
another DPC event immediately after DPC recovery.  Ensure that the
corresponding DLLSC event is not ignored by synthesizing it and invoking
irq_wake_thread() to trigger a re-run of pciehp_ist().

The IRQ threads of the hotplug and DPC drivers, pciehp_ist() and
dpc_handler(), race against each other.  If pciehp is faster than DPC, it
will wait until DPC recovery completes.

Recovery consists of two steps:  The first step (waiting for link
disablement) is recognizable by pciehp through a set DPC Trigger Status
bit.  The second step (waiting for link retraining) is recognizable through
a newly introduced PCI_DPC_RECOVERING flag.

If DPC is faster than pciehp, neither of the two flags will be set and
pciehp may glean the recovery status from the new PCI_DPC_RECOVERED flag.
The flag is zero if DPC didn't occur at all, hence DLLSC events are not
ignored by default.

pciehp waits up to 4 seconds before assuming that DPC recovery failed and
bringing down the slot.  This timeout is not taken from the spec (it
doesn't mandate one) but based on a report from Yicong Yang that DPC may
take a bit more than 3 seconds on HiSilicon's Kunpeng platform.

The timeout is necessary because the DPC Trigger Status bit may never
clear:  On Root Ports which support RP Extensions for DPC, the DPC driver
polls the DPC RP Busy bit for up to 1 second before giving up on DPC
recovery.  Without the timeout, pciehp would then wait indefinitely for DPC
to complete.

This commit draws inspiration from previous attempts to synchronize DPC
with pciehp:

By Sinan Kaya, August 2018:
https://lore.kernel.org/linux-pci/20180818065126.77912-1-okaya@kernel.org/

By Ethan Zhao, October 2020:
https://lore.kernel.org/linux-pci/20201007113158.48933-1-haifeng.zhao@intel.com/

By Kuppuswamy Sathyanarayanan, March 2021:
https://lore.kernel.org/linux-pci/59cb30f5e5ac6d65427ceaadf1012b2ba8dbf66c.1615606143.git.sathyanarayanan.kuppuswamy@linux.intel.com/

Link: https://lore.kernel.org/r/0be565d97438fe2a6d57354b3aa4e8626952a00b.1619857124.git.lukas@wunner.de
Reported-by: Sinan Kaya <okaya@kernel.org>
Reported-by: Ethan Zhao <haifeng.zhao@intel.com>
Reported-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Tested-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Tested-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Keith Busch <kbusch@kernel.org>
2021-06-16 17:16:57 -05:00
Krzysztof Wilczyński f8cf6e513e PCI/sysfs: Use sysfs_emit() and sysfs_emit_at() in "show" functions
The sysfs_emit() and sysfs_emit_at() functions were introduced to make
it less ambiguous which function is preferred when writing to the output
buffer in a device attribute's "show" callback [1].

Convert the PCI sysfs object "show" functions from sprintf(), snprintf()
and scnprintf() to sysfs_emit() and sysfs_emit_at() accordingly, as the
latter is aware of the PAGE_SIZE buffer and correctly returns the number
of bytes written into the buffer.

No functional change intended.

[1] Documentation/filesystems/sysfs.rst

Related commit: ad025f8e46 ("PCI/sysfs: Use sysfs_emit() and
sysfs_emit_at() in "show" functions").

Link: https://lore.kernel.org/r/20210603000112.703037-2-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2021-06-03 22:14:47 -05:00
Linus Torvalds e48661230c more s390 updates for 5.13 merge window
- add support for system call stack randomization.
 
 - handle stale PCI deconfiguration events.
 
 - couple of defconfig updates.
 
 - some fixes and cleanups.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEECMNfWEw3SLnmiLkZIg7DeRspbsIFAmCURRgACgkQIg7DeRsp
 bsLiVw//ThqXjgP7koJtawL0MFvSo1V69KTw1QNoMmUvrCynZ8nJlt4sHj1LIuEN
 m7kHoWUsvNcg8r8QbxL1eZ2f/Qf43qrFjXIKi5iTdOtO/LF9NNNQYFnA3cT3h9oE
 7hfycj8o5yi+KYY3Ca2HjlQ0i7zKYfPul1+Yms5h0nAgcvOXuPltVAlyYrrtddrM
 cfpolZZd1IB/lMHSa8/qLviRB5ADlrNx4N6Y1ROeCPCWDbO8flrnDOPTDG8a8sCN
 llQ0/vBTmenkGyT7UjG5bx9P/gX1FsMShBtyZMa8t8leIJfruDiwdo87wvSDf5IT
 I612xdbLpMfGy6i/LnJHhnw61FkpwBKJZ3UrVVkrmjY8IVN8tVdAjy5s4Fplhgjj
 BUbk9Ep03YCqfO6fpqh5DkBxCF0dnj4dZrcHA881/DnZuUkxpMJhyNjJDIx1OLup
 PC+y9eILFAnDveFvhZJZeMpH7wAheyrW/WgKZsZNLYZ+61pKPyGn9RrE5UBgI7ra
 CSIi9Km/lAuNCd9o4n5/5wCd3a9dW47kCrRe3S20oF57v5RU3AVtbC2YSUqPYahf
 NR4ZgL+zDhByLPRVij5FJ1LLeaJJftKM9uUO9egHOk1JnSxDc9EyU41x4838SKYv
 CfhQJw1ISTTRNCGeflE7+CBfEYCKX7h+DySVCtxTsg6PelcQHLs=
 =C1HZ
 -----END PGP SIGNATURE-----

Merge tag 's390-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull more s390 updates from Heiko Carstens:

 - add support for system call stack randomization

 - handle stale PCI deconfiguration events

 - couple of defconfig updates

 - some fixes and cleanups

* tag 's390-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: fix detection of vector enhancements facility 1 vs. vector packed decimal facility
  s390/entry: add support for syscall stack randomization
  s390/configs: change CONFIG_VIRTIO_CONSOLE to "m"
  s390/cio: remove invalid condition on IO_SCH_UNREG
  s390/cpumf: remove call to perf_event_update_userpage
  s390/cpumf: move counter set size calculation to common place
  s390/cpumf: beautify if-then-else indentation
  s390/configs: enable CONFIG_PCI_IOV
  s390/pci: handle stale deconfiguration events
  s390/pci: rename zpci_configure_device()
2021-05-06 14:39:50 -07:00
Linus Torvalds 57151b502c pci-v5.13-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmCRp48UHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vwsVRAAsIYueNKzZczpkeQwHigYzf4HLdKm
 yyT2c/Zlj9REAUOe7ApkowVAJWiMGDJP0J361KIluAGvAxnkMP1V6WlVdByorYd0
 CrXc/UhD//cs+3QDo4SmJRHyL8q5QQTDa8Z/8seVJUYTR/t5OhSpMOuEJPhpeQ1s
 nqUk0yWNJRoN6wn6T/7KqgYEvPhARXo9epuWy5MNPZ5f8E7SRi/QG/6hP8/YOLpK
 A+8beIOX5LAvUJaXxEovwv5UQnSUkeZTGDyRietQYE6xXNeHPKCvZ7vDjjSE7NOW
 mIodD6JcG3n/riYV3sMA5PKDZgsPI3P/qJU6Y6vWBBYOaO/kQX/c7CZ+M2bcZay4
 mh1dW0vOqoTy/pAVwQB2aq08Rrg2SAskpNdeyzduXllmuTyuwCMPXzG4RKmbQ8I1
 qMFb8qOyNulRAWcTKgSMKByEQYASQsFA5yShtaba6h0+vqrseuP6hchBKKOEan8F
 9THTI3ZflKwRvGjkI0MDbp0z0+wPYmNhrcZDpAJ3bEltw58E8TL/9aBtuhajmo8+
 wJ64mZclFuMmSyhsfkAXOvjeKXMlEBaw7vinZGbcACmv4ZGI0MV7r4vVYQbQltcy
 myzB6xJxcWB8N07UpKpUbsGMb9JjTUPlaT36eZNvUZQDntrE1ljt8RSq3nphDrcD
 KmBRU8ru74I2RE0=
 =WvTD
 -----END PGP SIGNATURE-----

Merge tag 'pci-v5.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull pci updates from Bjorn Helgaas:
 "Enumeration:
   - Release OF node when pci_scan_device() fails (Dmitry Baryshkov)
   - Add pci_disable_parity() (Bjorn Helgaas)
   - Disable Mellanox Tavor parity reporting (Heiner Kallweit)
   - Disable N2100 r8169 parity reporting (Heiner Kallweit)
   - Fix RCiEP device to RCEC association (Qiuxu Zhuo)
   - Convert sysfs "config", "rom", "reset", "label", "index",
     "acpi_index" to static attributes to help fix races in device
     enumeration (Krzysztof Wilczyński)
   - Convert sysfs "vpd" to static attribute (Heiner Kallweit, Krzysztof
     Wilczyński)
   - Use sysfs_emit() in "show" functions (Krzysztof Wilczyński)
   - Remove unused alloc_pci_root_info() return value (Krzysztof
     Wilczyński)

  PCI device hotplug:
   - Fix acpiphp reference count leak (Feilong Lin)

  Power management:
   - Fix acpi_pci_set_power_state() debug message (Rafael J. Wysocki)
   - Fix runtime PM imbalance (Dinghao Liu)

  Virtualization:
   - Increase delay after FLR to work around Intel DC P4510 NVMe erratum
     (Raphael Norwitz)

  MSI:
   - Convert rcar, tegra, xilinx to MSI domains (Marc Zyngier)
   - For rcar, xilinx, use controller address as MSI doorbell (Marc
     Zyngier)
   - Remove unused hv msi_controller struct (Marc Zyngier)
   - Remove unused PCI core msi_controller support (Marc Zyngier)
   - Remove struct msi_controller altogether (Marc Zyngier)
   - Remove unused default_teardown_msi_irqs() (Marc Zyngier)
   - Let host bridges declare their reliance on MSI domains (Marc
     Zyngier)
   - Make pci_host_common_probe() declare its reliance on MSI domains
     (Marc Zyngier)
   - Advertise mediatek lack of built-in MSI handling (Thomas Gleixner)
   - Document ways of ending up with NO_MSI (Marc Zyngier)
   - Refactor HT advertising of NO_MSI flag (Marc Zyngier)

  VPD:
   - Remove obsolete Broadcom NIC VPD length-limiting quirk (Heiner
     Kallweit)
   - Remove sysfs VPD size checking dead code (Heiner Kallweit)
   - Convert VPF sysfs file to static attribute (Heiner Kallweit)
   - Remove unnecessary pci_set_vpd_size() (Heiner Kallweit)
   - Tone down "missing VPD" message (Heiner Kallweit)

  Endpoint framework:
   - Fix NULL pointer dereference when epc_features not implemented
     (Shradha Todi)
   - Add missing destroy_workqueue() in endpoint test (Yang Yingliang)

  Amazon Annapurna Labs PCIe controller driver:
   - Fix compile testing without CONFIG_PCI_ECAM (Arnd Bergmann)
   - Fix "no symbols" warnings when compile testing with
     CONFIG_TRIM_UNUSED_KSYMS (Arnd Bergmann)

  APM X-Gene PCIe controller driver:
   - Fix cfg resource mapping regression (Dejin Zheng)

  Broadcom iProc PCIe controller driver:
   - Return zero for success of iproc_msi_irq_domain_alloc() (Pali
     Rohár)

  Broadcom STB PCIe controller driver:
   - Add reset_control_rearm() stub for !CONFIG_RESET_CONTROLLER (Jim
     Quinlan)
   - Fix use of BCM7216 reset controller (Jim Quinlan)
   - Use reset/rearm for Broadcom STB pulse reset instead of
     deassert/assert (Jim Quinlan)
   - Fix brcm_pcie_probe() error return for unsupported revision (Wei
     Yongjun)

  Cavium ThunderX PCIe controller driver:
   - Fix compile testing (Arnd Bergmann)
   - Fix "no symbols" warnings when compile testing with
     CONFIG_TRIM_UNUSED_KSYMS (Arnd Bergmann)

  Freescale Layerscape PCIe controller driver:
   - Fix ls_pcie_ep_probe() syntax error (comma for semicolon)
     (Krzysztof Wilczyński)
   - Remove layerscape-gen4 dependencies on OF and ARM64, add dependency
     on ARCH_LAYERSCAPE (Geert Uytterhoeven)

  HiSilicon HIP PCIe controller driver:
   - Remove obsolete HiSilicon PCIe DT description (Dongdong Liu)

  Intel Gateway PCIe controller driver:
   - Remove unused pcie_app_rd() (Jiapeng Chong)

  Intel VMD host bridge driver:
   - Program IRTE with Requester ID of VMD endpoint, not child device
     (Jon Derrick)
   - Disable VMD MSI-X remapping when possible so children can use more
     MSI-X vectors (Jon Derrick)

  MediaTek PCIe controller driver:
   - Configure FC and FTS for functions other than 0 (Ryder Lee)
   - Add YAML schema for MediaTek (Jianjun Wang)
   - Export pci_pio_to_address() for module use (Jianjun Wang)
   - Add MediaTek MT8192 PCIe controller driver (Jianjun Wang)
   - Add MediaTek MT8192 INTx support (Jianjun Wang)
   - Add MediaTek MT8192 MSI support (Jianjun Wang)
   - Add MediaTek MT8192 system power management support (Jianjun Wang)
   - Add missing MODULE_DEVICE_TABLE (Qiheng Lin)

  Microchip PolarFlare PCIe controller driver:
   - Make several symbols static (Wei Yongjun)

  NVIDIA Tegra PCIe controller driver:
   - Add MCFG quirks for Tegra194 ECAM errata (Vidya Sagar)
   - Make several symbols const (Rikard Falkeborn)
   - Fix Kconfig host/endpoint typo (Wesley Sheng)

  SiFive FU740 PCIe controller driver:
   - Add pcie_aux clock to prci driver (Greentime Hu)
   - Use reset-simple in prci driver for PCIe (Greentime Hu)
   - Add SiFive FU740 PCIe host controller driver and DT binding (Paul
     Walmsley, Greentime Hu)

  Synopsys DesignWare PCIe controller driver:
   - Move MSI Receiver init to dw_pcie_host_init() so it is
     re-initialized along with the RC in resume (Jisheng Zhang)
   - Move iATU detection earlier to fix regression (Hou Zhiqiang)

  TI J721E PCIe driver:
   - Add DT binding and TI j721e support for refclk to PCIe connector
     (Kishon Vijay Abraham I)
   - Add host mode and endpoint mode DT bindings for TI AM64 SoC (Kishon
     Vijay Abraham I)

  TI Keystone PCIe controller driver:
   - Use generic config accessors for TI AM65x (K3) to fix regression
     (Kishon Vijay Abraham I)

  Xilinx NWL PCIe controller driver:
   - Add support for coherent PCIe DMA traffic using CCI (Bharat Kumar
     Gogada)
   - Add optional "dma-coherent" DT property (Bharat Kumar Gogada)

  Miscellaneous:
   - Fix kernel-doc warnings (Krzysztof Wilczyński)
   - Remove unused MicroGate SyncLink device IDs (Jiri Slaby)
   - Remove redundant dev_err() for devm_ioremap_resource() failure
     (Chen Hui)
   - Remove redundant initialization (Colin Ian King)
   - Drop redundant dev_err() for platform_get_irq() errors (Krzysztof
     Wilczyński)"

* tag 'pci-v5.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (98 commits)
  riscv: dts: Add PCIe support for the SiFive FU740-C000 SoC
  PCI: fu740: Add SiFive FU740 PCIe host controller driver
  dt-bindings: PCI: Add SiFive FU740 PCIe host controller
  MAINTAINERS: Add maintainers for SiFive FU740 PCIe driver
  clk: sifive: Use reset-simple in prci driver for PCIe driver
  clk: sifive: Add pcie_aux clock in prci driver for PCIe driver
  PCI: brcmstb: Use reset/rearm instead of deassert/assert
  ata: ahci_brcm: Fix use of BCM7216 reset controller
  reset: add missing empty function reset_control_rearm()
  PCI: Allow VPD access for QLogic ISP2722
  PCI/VPD: Add helper pci_get_func0_dev()
  PCI/VPD: Remove pci_vpd_find_tag() SRDT handling
  PCI/VPD: Remove pci_vpd_find_tag() 'offset' argument
  PCI/VPD: Change pci_vpd_init() return type to void
  PCI/VPD: Make missing VPD message less alarming
  PCI/VPD: Remove pci_set_vpd_size()
  x86/PCI: Remove unused alloc_pci_root_info() return value
  MAINTAINERS: Add Jianjun Wang as MediaTek PCI co-maintainer
  PCI: mediatek-gen3: Add system PM support
  PCI: mediatek-gen3: Add MSI support
  ...
2021-05-05 13:24:11 -07:00
Bjorn Helgaas 7faf1dacfb Merge branch 'pci/kernel-doc'
- Fix kernel-doc warnings (Krzysztof Wilczyński)

* pci/kernel-doc:
  PCI: Fix kernel-doc errors
2021-05-04 10:43:24 -05:00
Niklas Schnelle a7f82c3641 s390/pci: rename zpci_configure_device()
With zpci_configure_device() now always called on a device that has
already been configured on the platform level its name has become
misleading. Rename it to zpci_scan_configured_device() to signify that
the function now only handles the correct scanning of a newly configured
PCI function taking care of the special handling necessary for function
0 and functions parked waiting for a PCI bus that can't be created
without first seeing function 0.

Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-04-30 17:17:00 +02:00
chakravarthikulkarni ea3b50c51d PCI: acpiphp: Fix whitespace issue
Fix coding style for braces.

[bhelgaas: drop comment change]
Link: https://lore.kernel.org/r/20210301072145.19018-1-chakravarthikulkarni2021@gmail.com
Signed-off-by: chakravarthikulkarni <chakravarthikulkarni2021@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-16 14:32:18 -05:00
Jiapeng Chong a7b6864da7 PCI: shpchp: Remove unused shpc_writeb()
Fix the following clang warning:

  drivers/pci/hotplug/shpchp_hpc.c:177:20: warning: unused function 'shpc_writeb' [-Wunused-function].

Link: https://lore.kernel.org/r/1618475422-96531-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
2021-04-16 11:22:24 -05:00
Guobin Huang 3a306a5b60 PCI: cpqphp: Use DEFINE_SPINLOCK() for int15_lock
Initialize the static int15_lock spinlock with DEFINE_SPINLOCK() rather
than explicitly calling spin_lock_init().

Link: https://lore.kernel.org/r/1617710797-48903-1-git-send-email-huangguobin4@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Guobin Huang <huangguobin4@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-14 15:24:10 -05:00
Niklas Schnelle 61311e3289 s390/pci: narrow scope of zpci_configure_device()
Currently zpci_configure_device() can be called on a zPCI function in
two completely different states. Either the underlying zPCI function has
already been configured by the platform and we are only doing the
scanning to get it usable by Linux drivers. Or the underlying function
is in Standby and we first do an SCLP to get it configured. This makes
zpci_configure_device() harder to reason about. Since calling
zpci_configure_device() on a function in Standby only happens in
enable_slot() simply pull out the SCLP call and setting of zdev->state
and thus call zpci_configure_device() under the same circumstances as
in the event handling code.

Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-04-12 12:46:42 +02:00
Feilong Lin 3bbfd31903 ACPI / hotplug / PCI: Fix reference count leak in enable_slot()
In enable_slot(), if pci_get_slot() returns NULL, we clear the SLOT_ENABLED
flag. When pci_get_slot() finds a device, it increments the device's
reference count.  In this case, we did not call pci_dev_put() to decrement
the reference count, so the memory of the device (struct pci_dev type) will
eventually leak.

Call pci_dev_put() to decrement its reference count when pci_get_slot()
returns a PCI device.

Link: https://lore.kernel.org/r/b411af88-5049-a1c6-83ac-d104a1f429be@huawei.com
Signed-off-by: Feilong Lin <linfeilong@huawei.com>
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-08 11:04:18 -05:00
Niklas Schnelle 2631f6b6f2 s390/pci: unify de-/configure for slots and events
A zPCI event with PEC 0x0301 for an existing zPCI device goes through
the same actions as enable_slot(). Similarly a zPCI event with PEC
0x0303 does the same steps as disable_slot().
We can thus unify both actions as zpci_configure_device() respectively
zpci_deconfigure_device().

Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-22 11:36:04 +01:00
Niklas Schnelle f6576a1b48 s390/pci: refactor zpci function states
The current zdev->state mixes the configuration states supported by CLP
with an additional Online state which is used inconsistently to include
enabled zPCI functions which are not yet visible to the common PCI
subsytem. In preparation for a clean separation between architected
configuration states and fine grained function states remove the Online
function state.

Where we previously checked for Online it is more accurate to check if
the function is enabled to avoid an edge case where a disabled device
was still treated as Online. This also simplifies checks whether
a function is configured as this is now directly reflected by its
function state.

Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-22 11:36:03 +01:00
Linus Torvalds b35660a7ce powerpc fixes for 5.12 #4
Fix a possible stack corruption and subsequent DLPAR failure in the rpadlpar_io
 PCI hotplug driver.
 
 Two build fixes for uncommon configurations.
 
 Thanks to Christophe Leroy, Tyrel Datwyler.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmBW07ITHG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgCgPD/42KWJ65JFHpYpoHz9NYSersTNAfylb
 n4azydr13CLb4SsXj0K5cHg6QYGcL9K8BxXV7Y2k9mDENh4tVbrvtdKmg1KyrKnb
 TwyK+CgTSm7mgxHWtZKYOnrDbZjZR7onTZuFIpcfGqHvKP1M9OjZwwHgkSQ8+YDH
 pkjv0PnJhpWZXh8xDkFJL0eckRS5tmIH58Lmpq98IForxVR1xrI65giEN9uf3seB
 KFXUhVaMYQ8vaqXblC3jKdzPbcvIJEJ/CbJ6dIcvrdFHiKu0osRRChvAgE6+siY5
 bCHuuX/TJty26fZo6vXB1yYzpQkvzC0HmL7mOqGC/DWiUxyzmUJb0hd+VG6NC1Bn
 aZnXXUdaGHH2sUWraxPr7VtpPEc2SN/aKYTGgG8k7ethP5LmwQIQjZwvyXT0QkOu
 zpcXtoxzSBdmRZiWtAP37LVRFJzegj0IJklHxRNoksHmneSLWtV59XsF+2k9GxVg
 OwTsmOq+f05fiuLnFmcJaNTE0X+nPfwnDPqnoHHJZH4jS4jS8Kj0HW4OoxWvSniq
 CyeHRlzu0ur5kMnfYhVxjbygQdwNqY/c1Sw8H8pgNIEcZpWCv+oF9Y8Wk1fbrXS8
 JM9c+tTUC4+22ViiSU2COr5hSQKzNqaZ7f+e0bpxbCBh8X1SvJUmnH78KHPn8ok+
 zefOL+EKNYV4yg==
 =SHvi
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

 - Fix a possible stack corruption and subsequent DLPAR failure in the
   rpadlpar_io PCI hotplug driver

 - Two build fixes for uncommon configurations

Thanks to Christophe Leroy and Tyrel Datwyler.

* tag 'powerpc-5.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  PCI: rpadlpar: Fix potential drc_name corruption in store functions
  powerpc: Force inlining of cpu_has_feature() to avoid build failure
  powerpc/vdso32: Add missing _restgpr_31_x to fix build failure
2021-03-21 10:57:35 -07:00
Tyrel Datwyler cc7a0bb058 PCI: rpadlpar: Fix potential drc_name corruption in store functions
Both add_slot_store() and remove_slot_store() try to fix up the
drc_name copied from the store buffer by placing a NUL terminator at
nbyte + 1 or in place of a '\n' if present. However, the static buffer
that we copy the drc_name data into is not zeroed and can contain
anything past the n-th byte.

This is problematic if a '\n' byte appears in that buffer after nbytes
and the string copied into the store buffer was not NUL terminated to
start with as the strchr() search for a '\n' byte will mark this
incorrectly as the end of the drc_name string resulting in a drc_name
string that contains garbage data after the n-th byte.

Additionally it will cause us to overwrite that '\n' byte on the stack
with NUL, potentially corrupting data on the stack.

The following debugging shows an example of the drmgr utility writing
"PHB 4543" to the add_slot sysfs attribute, but add_slot_store()
logging a corrupted string value.

  drmgr: drmgr: -c phb -a -s PHB 4543 -d 1
  add_slot_store: drc_name = PHB 4543°|<82>!, rc = -19

Fix this by using strscpy() instead of memcpy() to ensure the string
is NUL terminated when copied into the static drc_name buffer.
Further, since the string is now NUL terminated the code only needs to
change '\n' to '\0' when present.

Cc: stable@vger.kernel.org
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
[mpe: Reformat change log and add mention of possible stack corruption]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210315214821.452959-1-tyreld@linux.ibm.com
2021-03-17 13:48:07 +11:00
Niklas Schnelle 0b13525c20 s390/pci: fix leak of PCI device structure
In commit 05bc1be6db ("s390/pci: create zPCI bus") we removed the
pci_dev_put() call matching the earlier pci_get_slot() done as part of
__zpci_event_availability(). This was based on the wrong understanding
that the device_put() done as part of pci_destroy_device() would counter
the pci_get_slot() when it only counters the initial reference. This
same understanding and existing bad example also lead to not doing
a pci_dev_put() in zpci_remove_device().

Since releasing the PCI devices, unlike releasing the PCI slot, does not
print any debug message for testing I added one in pci_release_dev().
This revealed that we are indeed leaking the PCI device on PCI
hotunplug. Further testing also revealed another missing pci_dev_put() in
disable_slot().

Fix this by adding the missing pci_dev_put() in disable_slot() and fix
zpci_remove_device() with the correct pci_dev_put() calls. Also instead
of calling pci_get_slot() in __zpci_event_availability() to determine if
a PCI device is registered and then doing the same again in
zpci_remove_device() do this once in zpci_remove_device() which makes
sure that the pdev in __zpci_event_availability() is only used for the
result of pci_scan_single_device() which does not need a reference count
decremnt as its ownership goes to the PCI bus.

Also move the check if zdev->zbus->bus is set into zpci_remove_device()
since it may be that we're removing a device with devfn != 0 which never
had a PCI bus. So we can still set the pdev->error_state to indicate
that the device is not usable anymore, add a flag to set the error state.

Fixes: 05bc1be6db ("s390/pci: create zPCI bus")
Cc: <stable@vger.kernel.org> # 5.8+: e1bff843cd s390/pci: remove superfluous zdev->zbus check
Cc: <stable@vger.kernel.org> # 5.8+: ba764dd703 s390/pci: refactor zpci_create_device()
Cc: <stable@vger.kernel.org> # 5.8+
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2021-03-15 19:10:56 +01:00
Krzysztof Wilczyński 43395d9e09 PCI: Fix kernel-doc errors
Fix kernel-doc formatting errors, function names that don't match the doc,
and some missing parameter documentation.  These are reported by:

  make W=1 drivers/pci/

No functional change intended.

[bhelgaas: squashed into one patch since this only changes comments]
Link: https://lore.kernel.org/r/20210311001724.423356-1-kw@linux.com
Link: https://lore.kernel.org/r/20210311001724.423356-2-kw@linux.com
Link: https://lore.kernel.org/r/20210311001724.423356-3-kw@linux.com
Link: https://lore.kernel.org/r/20210311001724.423356-4-kw@linux.com
Link: https://lore.kernel.org/r/20210311001724.423356-5-kw@linux.com
Link: https://lore.kernel.org/r/20210311001724.423356-6-kw@linux.com
Link: https://lore.kernel.org/r/20210311001724.423356-7-kw@linux.com
Link: https://lore.kernel.org/r/20210311001724.423356-8-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-03-11 17:37:20 -06:00
Chen Lin fc235fcb0f PCI: acpiphp: Remove unused acpiphp_callback typedef
Remove the 'acpiphp_callback' typedef as it is not used.

Link: https://lore.kernel.org/r/1613443120-4279-1-git-send-email-chen45464546@163.com
Signed-off-by: Chen Lin <chen.lin5@zte.com.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-02-18 17:32:37 -06:00
Bjorn Helgaas e47756c6b4 PCI: ibmphp: Remove unneeded break
A break is not needed if it is preceded by a return.

Based on Tom Rix's treewide patch; this instance extracted from Joe
Perches' list.

Link: https://lore.kernel.org/r/20201017160928.12698-1-trix@redhat.com
Link: https://lore.kernel.org/r/f530b7aeecbbf9654b4540cfa20023a4c2a11889.camel@perches
.com
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Tom Rix <trix@redhat.com>
Cc: Joe Perches <joe@perches.com>
2020-11-20 11:17:55 -06:00
Linus Torvalds 00937f36b0 pci-v5.10-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAl+QUFkUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vw6SQ/9FHiAlHIa48/l5ZweqAuN3XnU8hoO
 sqMoJE8eqTkIYIT0aQdW6b1sDB0YE6b4UVxzg+UL/E0qYeJqgIUakig7QkyyF1qU
 aT5hq2ic+lk88G7AAxK3kgQGPk+JvP1EFIyOu6HBWzzDDzgLme1Iuh/5ulc2/lo+
 E4biy0WOnI8vMfCieXGK4bSpc17Rn0+3N4cuVwZXBlntsvicE90VqeWBzqti1sk5
 R6gkZuW+EIUNHHL7TLlkCeYZq6QNbXWzhfKCiaGW2wW4eJ4Ek1/ncQjyTbCFytKU
 7OIYvrH20XO3L5GEfJ5fdbWErI1dRpoHO4NmhWljyBcVh44VYnM2ixhA7TuJ+TOk
 OtMbtoJAlP+QDlVdAW6rmRYmMPLFK/AQl5Aq7ftY22b2rYXqP20BobPy2MpDT71T
 sGC8z0ABl/ijo23g3I+3/2VzP/RzGhZJ0ZqagrXj8jHtg8SVy2fLcR5nr/dlrgFk
 TG83zML6ui1KViyx5nzElaEtw18aTqP61CNQxijQtNoYwKBTtRKNTrdRr4Qo7Hi6
 6S+No3+4z8Kf8d90y0LkJQqr7JRkG6nI3AhXHO3rxXpXJOD2+QzlpwBZTQnASqq7
 3kC1doUPmN97rFUYPQWWyOs6xSMcGbGIz8Uus3shH6yDtNxgpnIVoctH55hTEh6w
 nSY/4ssIfzJxZCE=
 =RCFo
 -----END PGP SIGNATURE-----

Merge tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:
   - Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong
     Liu)
   - Add schedule point in pci_read_config() to reduce max latency
     (Jiang Biao)
   - Add Kconfig options for MPS/MRRS strategy (Jim Quinlan)

  Resource management:
   - Fix pci_iounmap() memory leak when !CONFIG_GENERIC_IOMAP (Lorenzo
     Pieralisi)

  PCIe native device hotplug:
   - Reduce noisiness on hot removal (Lukas Wunner)

  Power management:
   - Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds"
     that was done on the basis of spec typo (Bjorn Helgaas)
   - Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold
     ambiguity (Krzysztof Wilczyński)
   - Remove unused pcibios_pm_ops (Vaibhav Gupta)

  IOMMU:
   - Enable Translation Blocking for external devices to harden against
     DMA attacks (Rajat Jain)

  Error handling:
   - Add an ACPI APEI notifier chain for vendor CPER records to enable
     device-specific error handling (Shiju Jose)

  ASPM:
   - Remove struct aspm_register_info to simplify code (Saheed O.
     Bolarinwa)

  Amlogic Meson PCIe controller driver:
   - Build as module by default (Kevin Hilman)

  Ampere Altra PCIe controller driver:
   - Add MCFG quirk to work around non-standard ECAM implementation
     (Tuan Phan)

  Broadcom iProc PCIe controller driver:
   - Set affinity mask on MSI interrupts (Mark Tomlinson)

  Broadcom STB PCIe controller driver:
   - Make PCIE_BRCMSTB depend on ARCH_BRCMSTB (Jim Quinlan)
   - Add DT bindings for more Brcmstb chips (Jim Quinlan)
   - Add bcm7278 register info (Jim Quinlan)
   - Add bcm7278 PERST# support (Jim Quinlan)
   - Add suspend and resume pm_ops (Jim Quinlan)
   - Add control of rescal reset (Jim Quinlan)
   - Set additional internal memory DMA viewport sizes (Jim Quinlan)
   - Accommodate MSI for older chips (Jim Quinlan)
   - Set bus max burst size by chip type (Jim Quinlan)
   - Add support for bcm7211, bcm7216, bcm7445, bcm7278 (Jim Quinlan)

  Freescale i.MX6 PCIe controller driver:
   - Use dev_err_probe() to reduce redundant messages (Anson Huang)

  Freescale Layerscape PCIe controller driver:
   - Enforce 4K DMA buffer alignment in endpoint test (Hou Zhiqiang)
   - Add DT compatible strings for ls1088a, ls2088a (Xiaowei Bao)
   - Add endpoint support for ls1088a, ls2088a (Xiaowei Bao)
   - Add endpoint test support for lS1088a (Xiaowei Bao)
   - Add MSI-X support for ls1088a (Xiaowei Bao)

  HiSilicon HIP PCIe controller driver:
   - Handle HIP-specific errors via ACPI APEI (Yicong Yang)

  HiSilicon Kirin PCIe controller driver:
   - Return -EPROBE_DEFER if the GPIO isn't ready (Bean Huo)

  Intel VMD host bridge driver:
   - Factor out physical offset, bus offset, IRQ domain, IRQ allocation
     (Jon Derrick)
   - Use generic PCI PM correctly (Jon Derrick)

  Marvell Aardvark PCIe controller driver:
   - Fix compilation on s390 (Pali Rohár)
   - Implement driver 'remove' function and allow to build it as module
     (Pali Rohár)
   - Move PCIe reset card code to advk_pcie_train_link() (Pali Rohár)
   - Convert mvebu a3700 internal SMCC firmware return codes to errno
     (Pali Rohár)
   - Fix initialization with old Marvell's Arm Trusted Firmware (Pali
     Rohár)

  Microsoft Hyper-V host bridge driver:
   - Fix hibernation in case interrupts are not re-created (Dexuan Cui)

  NVIDIA Tegra PCIe controller driver:
   - Stop checking return value of debugfs_create() functions (Greg
     Kroah-Hartman)
   - Convert to use DEFINE_SEQ_ATTRIBUTE macro (Liu Shixin)

  Qualcomm PCIe controller driver:
   - Reset PCIe to work around Qsdk U-Boot issue (Ansuel Smith)

  Renesas R-Car PCIe controller driver:
   - Add DT documentation for r8a774a1, r8a774b1, r8a774e1 endpoints
     (Lad Prabhakar)
   - Add RZ/G2M, RZ/G2N, RZ/G2H IDs to endpoint test (Lad Prabhakar)
   - Add DT support for r8a7742 (Lad Prabhakar)

  Socionext UniPhier Pro5 controller driver:
   - Add DT descriptions of iATU register (host and endpoint) (Kunihiko
     Hayashi)

  Synopsys DesignWare PCIe controller driver:
   - Add link up check in dw_child_pcie_ops.map_bus() (racy, but seems
     unavoidable) (Hou Zhiqiang)
   - Fix endpoint Header Type check so multi-function devices work (Hou
     Zhiqiang)
   - Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang)
   - Stop leaking MSI page in suspend/resume (Jisheng Zhang)
   - Add common iATU register support instead of keystone-specific code
     (Kunihiko Hayashi)
   - Major config space access and other cleanups in dwc core and
     drivers that use it (al, exynos, histb, imx6, intel-gw, keystone,
     kirin, meson, qcom, tegra) (Rob Herring)
   - Add multiple PFs support for endpoint (Xiaowei Bao)
   - Add MSI-X doorbell mode in endpoint mode (Xiaowei Bao)

  Miscellaneous:
   - Use fallthrough pseudo-keyword (Gustavo A. R. Silva)
   - Fix "0 used as NULL pointer" warnings (Gustavo Pimentel)
   - Fix "cast truncates bits from constant value" warnings (Gustavo
     Pimentel)
   - Remove redundant zeroing for sg_init_table() (Julia Lawall)
   - Use scnprintf(), not snprintf(), in sysfs "show" functions
     (Krzysztof Wilczyński)
   - Remove unused assignments (Krzysztof Wilczyński)
   - Fix "0 used as NULL pointer" warning (Krzysztof Wilczyński)
   - Simplify bool comparisons (Krzysztof Wilczyński)
   - Use for_each_child_of_node() and for_each_node_by_name() (Qinglang
     Miao)
   - Simplify return expressions (Qinglang Miao)"

* tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (147 commits)
  PCI: vmd: Update VMD PM to correctly use generic PCI PM
  PCI: vmd: Create IRQ allocation helper
  PCI: vmd: Create IRQ Domain configuration helper
  PCI: vmd: Create bus offset configuration helper
  PCI: vmd: Create physical offset helper
  PCI: v3-semi: Remove unneeded break
  PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus()
  PCI/ASPM: Remove struct pcie_link_state.l1ss
  PCI/ASPM: Remove struct aspm_register_info.l1ss_cap
  PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info
  PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1
  PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused)
  PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr
  PCI/ASPM: Remove struct aspm_register_info.latency_encoding
  PCI/ASPM: Remove struct aspm_register_info.enabled
  PCI/ASPM: Remove struct aspm_register_info.support
  PCI/ASPM: Use 'parent' and 'child' for readability
  PCI/ASPM: Move LTR path check to where it's used
  PCI/ASPM: Move pci_clear_and_set_dword() earlier
  PCI: dwc: Fix MSI page leakage in suspend/resume
  ...
2020-10-22 12:41:00 -07:00
Krzysztof Wilczyński 23cce2e00b PCI: shpchp: Remove unused 'rc' assignment
The value of the constant POWER_FAILURE assigned to the variable rc
after the power fault check is never used for anything, so remove it.

Addresses-Coverity-ID: 1226899 ("Unused value")
Link: https://lore.kernel.org/r/20200923025225.471459-1-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-09-28 17:26:02 -05:00
Lukas Wunner 8a61449941 PCI: pciehp: Reduce noisiness on hot removal
When a PCIe card is hot-removed, the Presence Detect State and Data Link
Layer Link Active bits often do not clear simultaneously.  I've seen delays
of up to 244 msec between the two events with Thunderbolt.

After pciehp has brought down the slot in response to the first event, the
other bit may still be set.  It's not discernible whether it's set because
a new card is already in the slot or if it will soon clear.  So pciehp
tries to bring up the slot and in the latter case fails with a bunch of
messages, some of them at KERN_ERR severity.  If the slot is no longer
occupied, the messages are false positives and annoy users.

Stuart Hayes reports the following splat on hot removal:

  KERN_INFO pcieport 0000:3c:06.0: pciehp: Slot(180): Link Up
  KERN_INFO pcieport 0000:3c:06.0: pciehp: Timeout waiting for Presence Detect
  KERN_ERR  pcieport 0000:3c:06.0: pciehp: link training error: status 0x0001
  KERN_ERR  pcieport 0000:3c:06.0: pciehp: Failed to check link status

Dongdong Liu complains about a similar splat:

  KERN_INFO pciehp 0000:80:10.0:pcie004: Slot(36): Link Down
  KERN_INFO iommu: Removing device 0000:87:00.0 from group 12
  KERN_INFO pciehp 0000:80:10.0:pcie004: Slot(36): Card present
  KERN_INFO pcieport 0000:80:10.0: Data Link Layer Link Active not set in 1000 msec
  KERN_ERR  pciehp 0000:80:10.0:pcie004: Failed to check link status

Users are particularly irritated to see a bringup attempt even though the
slot was explicitly brought down via sysfs.  In a perfect world, we could
avoid this by setting Link Disable on slot bringdown and re-enabling it
upon a Presence Detect State change.  In reality however, there are broken
hotplug ports which hardwire Presence Detect to zero, see 80696f9914
("PCI: pciehp: Tolerate Presence Detect hardwired to zero").  Conversely,
PCIe r1.0 hotplug ports hardwire Link Active to zero because Link Active
Reporting wasn't specified before PCIe r1.1.  On unplug, some ports first
clear Presence then Link (see Stuart Hayes' splat) whereas others use the
inverse order (see Dongdong Liu's splat).  To top it off, there are hotplug
ports which flap the Presence and Link bits on slot bringup, see
6c35a1ac3d ("PCI: pciehp: Tolerate initially unstable link").

pciehp is designed to work with all of these variants.  Surplus attempts at
slot bringup are a lesser evil than not being able to bring up slots at
all.  Although we could try to perfect the behavior for specific hotplug
controllers, we'd risk breaking others or increasing code complexity.

But we can certainly minimize annoyance by emitting only a single message
with KERN_INFO severity if bringup is unsuccessful:

* Drop the "Timeout waiting for Presence Detect" message in
  pcie_wait_for_presence().  The sole caller of that function,
  pciehp_check_link_status(), ignores the timeout and carries on.  It emits
  error messages of its own and I don't think this particular message adds
  much value.

* There's a single error condition in pciehp_check_link_status() which
  does not emit a message.  Adding one allows dropping the "Failed to check
  link status" message emitted by board_added() if
  pciehp_check_link_status() returns a non-zero integer.

* Tone down all messages in pciehp_check_link_status() to KERN_INFO
  severity and rephrase them to look as innocuous as possible.  To this
  end, move the message emitted by pcie_wait_for_link_delay() to its
  callers.

As a result, Stuart Hayes' splat becomes:

  KERN_INFO pcieport 0000:3c:06.0: pciehp: Slot(180): Link Up
  KERN_INFO pcieport 0000:3c:06.0: pciehp: Slot(180): Cannot train link: status 0x0001

Dongdong Liu's splat becomes:

  KERN_INFO pciehp 0000:80:10.0:pcie004: Slot(36): Card present
  KERN_INFO pciehp 0000:80:10.0:pcie004: Slot(36): No link

The messages now merely serve as information that presence or link bits
were set a little longer than expected.  Bringup failures which are not
false positives are still reported, albeit no longer at KERN_ERR severity.

Link: https://lore.kernel.org/linux-pci/20200310182100.102987-1-stuart.w.hayes@gmail.com/
Link: https://lore.kernel.org/linux-pci/1547649064-19019-1-git-send-email-liudongdong3@huawei.com/
Link: https://lore.kernel.org/r/b45e46fd8a6aa6930aaac9d7718c2e4b787a4e5e.1595935071.git.lukas@wunner.de
Reported-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Reported-by: Dongdong Liu <liudongdong3@huawei.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-09-17 16:22:36 -05:00
Qinglang Miao 85d79c5281 PCI: rpadlpar: Use for_each_child_of_node() and for_each_node_by_name()
Use for_each_child_of_node() and for_each_node_by_name() macros instead of
open coding them.

Link: https://lore.kernel.org/r/20200916062128.190819-1-miaoqinglang@huawei.com
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-09-17 16:22:36 -05:00
Gustavo A. R. Silva df561f6688 treewide: Use fallthrough pseudo-keyword
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-23 17:36:59 -05:00
Niklas Schnelle 2f0230b2f2 s390/pci: re-introduce zpci_remove_device()
For fixing the PF to VF link removal we need to perform some action on
every removal of a zdev from the common PCI subsystem.
So in preparation re-introduce zpci_remove_device() and use that instead
of directly calling the common code functions. This  was actually still
declared from earlier code but no longer implemented.

Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-08-17 13:17:25 +02:00
Linus Torvalds 049eb096da pci-v5.9-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAl8sdUkUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vwH2Q/7Brcm1uyLORSzseGsaXSGMncBs2YB
 aKbfhyy4BPsDIZRLnzcfRZzgKo3f4jlLH9dJ6nBukbNXCvS/g7oYCXtNKVuB70MD
 IgBH3OJxLmqsYgDkoQmj1fZBCBhdqMgGbRmeIPLqiIBrWOJkBpGHXKpb0XtyXAas
 CpD0Tvr0JBeHMluZq6Uay09jBDKexeCFrT5HCoVaRMXT/C/iB5K1oMrUczzITsdi
 jB9xesDjh32rYtaePKfuL8itbRT7jtqOwQlk7sCtnMNamaOOaYO/s6hL5v/4GxMh
 rtWa1knOxxA1nOsnEkUEHi0Fj/+9zXDIdb7v6thRDo0ZgWQxl7l3nshvmPcxX421
 tpCm3HqmvHzGqSI85Rtr3p4XKm9e+IjgE2EA/J6Y8Q6Grrb0EGJituhO4meL2Ciq
 6mxdhu7InxDJ2p3TLGas3fB/1hrCO0Fc0pQoBJx7YgqA1ANyld9DYCkDN6IDoZBI
 uUjKgkE1dfbW/pGjotjhBsmz3dycZHkurIFdt1iX/Xtt5KKdPAzu9yM2U03iIS2R
 im1wZ/THiS/YCOlgL/J8+DHTY0ZvXjAdbiSPjTFfwb9XTh8aHVWtFaaZON1jRIjg
 xMpIY0SxfshpLx631ThZdDTDiOwE8D3B+1n/kMwps6HOLpxOoJZeSGTRCt9wGP40
 j58DTtLm5FKpdYc=
 =moI9
 -----END PGP SIGNATURE-----

Merge tag 'pci-v5.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:
   - Fix pci_cfg_wait queue locking problem (Bjorn Helgaas)
   - Convert PCIe capability PCIBIOS errors to errno (Bolarinwa Olayemi
     Saheed)
   - Align PCIe capability and PCI accessor return values (Bolarinwa
     Olayemi Saheed)
   - Fix pci_create_slot() reference count leak (Qiushi Wu)
   - Announce device after early fixups (Tiezhu Yang)

  PCI device hotplug:
   - Make rpadlpar functions static (Wei Yongjun)

  Driver binding:
   - Add device even if driver attach failed (Rajat Jain)

  Virtualization:
   - xen: Remove redundant initialization of irq (Colin Ian King)

  IOMMU:
   - Add pci_pri_supported() to check device or associated PF (Ashok Raj)
   - Release IVRS table in AMD ACS quirk (Hanjun Guo)
   - Mark AMD Navi10 GPU rev 0x00 ATS as broken (Kai-Heng Feng)
   - Treat "external-facing" devices themselves as internal (Rajat Jain)

  MSI:
   - Forward MSI-X error code in pci_alloc_irq_vectors_affinity() (Piotr
     Stankiewicz)

  Error handling:
   - Clear PCIe Device Status errors only if OS owns AER (Jonathan
     Cameron)
   - Log correctable errors as warning, not error (Matt Jolly)
   - Use 'pci_channel_state_t' instead of 'enum pci_channel_state' (Luc
     Van Oostenryck)

  Peer-to-peer DMA:
   - Allow P2PDMA on AMD Zen and newer CPUs (Logan Gunthorpe)

  ASPM:
   - Add missing newline in sysfs 'policy' (Xiongfeng Wang)

  Native PCIe controllers:
   - Convert to devm_platform_ioremap_resource_byname() (Dejin Zheng)
   - Convert to devm_platform_ioremap_resource() (Dejin Zheng)
   - Remove duplicate error message from devm_pci_remap_cfg_resource()
     callers (Dejin Zheng)
   - Fix runtime PM imbalance on error (Dinghao Liu)
   - Remove dev_err() when handing an error from platform_get_irq()
     (Krzysztof Wilczyński)
   - Use pci_host_bridge.windows list directly instead of splicing in a
     temporary list for cadence, mvebu, host-common (Rob Herring)
   - Use pci_host_probe() instead of open-coding all the pieces for
     altera, brcmstb, iproc, mobiveil, rcar, rockchip, tegra, v3,
     versatile, xgene, xilinx, xilinx-nwl (Rob Herring)
   - Default host bridge parent device to the platform device (Rob
     Herring)
   - Use pci_is_root_bus() instead of tracking root bus number
     separately in aardvark, designware (imx6, keystone,
     designware-host), mobiveil, xilinx-nwl, xilinx, rockchip, rcar (Rob
     Herring)
   - Set host bridge bus number in pci_scan_root_bus_bridge() instead of
     each driver for aardvark, designware-host, host-common, mediatek,
     rcar, tegra, v3-semi (Rob Herring)
   - Move DT resource setup into devm_pci_alloc_host_bridge() (Rob
     Herring)
   - Set bridge map_irq and swizzle_irq to default functions; drivers
     that don't support legacy IRQs (iproc) need to undo this (Rob
     Herring)

  ARM Versatile PCIe controller driver:
   - Drop flag PCI_ENABLE_PROC_DOMAINS (Rob Herring)

  Cadence PCIe controller driver:
   - Use "dma-ranges" instead of "cdns,no-bar-match-nbits" property
     (Kishon Vijay Abraham I)
   - Remove "mem" from reg binding (Kishon Vijay Abraham I)
   - Fix cdns_pcie_{host|ep}_setup() error path (Kishon Vijay Abraham I)
   - Convert all r/w accessors to perform only 32-bit accesses (Kishon
     Vijay Abraham I)
   - Add support to start link and verify link status (Kishon Vijay
     Abraham I)
   - Allow pci_host_bridge to have custom pci_ops (Kishon Vijay Abraham I)
   - Add new *ops* for CPU addr fixup (Kishon Vijay Abraham I)
   - Fix updating Vendor ID and Subsystem Vendor ID register (Kishon
     Vijay Abraham I)
   - Use bridge resources for outbound window setup (Rob Herring)
   - Remove private bus number and range storage (Rob Herring)

  Cadence PCIe endpoint driver:
   - Add MSI-X support (Alan Douglas)

  HiSilicon PCIe controller driver:
   - Remove non-ECAM HiSilicon hip05/hip06 driver (Rob Herring)

  Intel VMD host bridge driver:
   - Use Shadow MEMBAR registers for QEMU/KVM guests (Jon Derrick)

  Loongson PCIe controller driver:
   - Use DECLARE_PCI_FIXUP_EARLY for bridge_class_quirk() (Tiezhu Yang)

  Marvell Aardvark PCIe controller driver:
   - Indicate error in 'val' when config read fails (Pali Rohár)
   - Don't touch PCIe registers if no card connected (Pali Rohár)

  Marvell MVEBU PCIe controller driver:
   - Setup BAR0 in order to fix MSI (Shmuel Hazan)

  Microsoft Hyper-V host bridge driver:
   - Fix a timing issue which causes kdump to fail occasionally (Wei Hu)
   - Make some functions static (Wei Yongjun)

  NVIDIA Tegra PCIe controller driver:
   - Revert tegra124 raw_violation_fixup (Nicolas Chauvet)
   - Remove PLL power supplies (Thierry Reding)

  Qualcomm PCIe controller driver:
   - Change duplicate PCI reset to phy reset (Abhishek Sahu)
   - Add missing ipq806x clocks in PCIe driver (Ansuel Smith)
   - Add missing reset for ipq806x (Ansuel Smith)
   - Add ext reset (Ansuel Smith)
   - Use bulk clk API and assert on error (Ansuel Smith)
   - Add support for tx term offset for rev 2.1.0 (Ansuel Smith)
   - Define some PARF params needed for ipq8064 SoC (Ansuel Smith)
   - Add ipq8064 rev2 variant (Ansuel Smith)
   - Support PCI speed set for ipq806x (Sham Muthayyan)

  Renesas R-Car PCIe controller driver:
   - Use devm_pci_alloc_host_bridge() (Rob Herring)
   - Use struct pci_host_bridge.windows list directly (Rob Herring)
   - Convert rcar-gen2 to use modern host bridge probe functions (Rob
     Herring)

  TI J721E PCIe driver:
   - Add TI J721E PCIe host and endpoint driver (Kishon Vijay Abraham I)

  Xilinx Versal CPM PCIe controller driver:
   - Add Versal CPM Root Port driver and YAML schema (Bharat Kumar
     Gogada)

  MicroSemi Switchtec management driver:
   - Add missing __iomem and __user tags to fix sparse warnings (Logan
     Gunthorpe)

  Miscellaneous:
   - Replace http:// links with https:// (Alexander A. Klimov)
   - Replace lkml.org, spinics, gmane with lore.kernel.org (Bjorn
     Helgaas)
   - Remove unused pci_lost_interrupt() (Heiner Kallweit)
   - Move PCI_VENDOR_ID_REDHAT definition to pci_ids.h (Huacai Chen)
   - Fix kerneldoc warnings (Krzysztof Kozlowski)"

* tag 'pci-v5.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits)
  PCI: Fix kerneldoc warnings
  PCI: xilinx-cpm: Add Versal CPM Root Port driver
  PCI: xilinx-cpm: Add YAML schemas for Versal CPM Root Port
  PCI: Set bridge map_irq and swizzle_irq to default functions
  PCI: Move DT resource setup into devm_pci_alloc_host_bridge()
  PCI: rcar-gen2: Convert to use modern host bridge probe functions
  PCI: Remove dev_err() when handing an error from platform_get_irq()
  MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe
  misc: pci_endpoint_test: Add J721E in pci_device_id table
  PCI: j721e: Add TI J721E PCIe driver
  PCI: switchtec: Add missing __iomem tag to fix sparse warnings
  PCI: switchtec: Add missing __iomem and __user tags to fix sparse warnings
  PCI: rpadlpar: Make functions static
  PCI/P2PDMA: Allow P2PDMA on AMD Zen and newer CPUs
  PCI: Release IVRS table in AMD ACS quirk
  PCI: Announce device after early fixups
  PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken
  PCI: Remove unused pci_lost_interrupt()
  dt-bindings: PCI: Add EP mode dt-bindings for TI's J721E SoC
  dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC
  ...
2020-08-07 18:48:15 -07:00
Bjorn Helgaas 65c2bc6ce9 Merge branch 'pci/doc'
- Fix several kerneldoc warnings (Krzysztof Kozlowski)

* pci/doc:
  PCI: Fix kerneldoc warnings
2020-08-05 18:24:22 -05:00
Krzysztof Kozlowski 9b41d19aff PCI: Fix kerneldoc warnings
Fix kerneldoc warnings, e.g.,

  $ make W=1 drivers/pci/
  drivers/pci/ats.c:196: warning: Function parameter or member 'pdev' not described in 'pci_enable_pri'
  drivers/pci/ats.c:196: warning: Function parameter or member 'reqs' not described in 'pci_enable_pri'
  ...

Link: https://lore.kernel.org/r/20200729201224.26799-2-krzk@kernel.org
Link: https://lore.kernel.org/r/20200729201224.26799-3-krzk@kernel.org
Link: https://lore.kernel.org/r/20200729201224.26799-4-krzk@kernel.org
Link: https://lore.kernel.org/r/20200729201224.26799-5-krzk@kernel.org
Link: https://lore.kernel.org/r/20200729201224.26799-6-krzk@kernel.org
Link: https://lore.kernel.org/r/20200729201224.26799-7-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-08-05 18:23:14 -05:00
Wei Yongjun 2e4770a566 PCI: rpadlpar: Make functions static
The sparse tool report build warnings as follows:

  drivers/pci/hotplug/rpadlpar_core.c:355:5: warning: symbol 'dlpar_remove_pci_slot' was not declared. Should it be static?
  drivers/pci/hotplug/rpadlpar_core.c:461:12: warning: symbol 'rpadlpar_io_init' was not declared. Should it be static?
  drivers/pci/hotplug/rpadlpar_core.c:473:6: warning: symbol 'rpadlpar_io_exit' was not declared. Should it be static?

Those functions are not used outside of this file, so mark them static.

Also mark rpadlpar_io_exit() as __exit.

Link: https://lore.kernel.org/r/20200721151735.41181-1-weiyongjun1@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-30 11:11:13 -05:00
Rafael J. Wysocki dae68d7fd4 PCI: hotplug: ACPI: Fix context refcounting in acpiphp_grab_context()
If context is not NULL in acpiphp_grab_context(), but the
is_going_away flag is set for the device's parent, the reference
counter of the context needs to be decremented before returning
NULL or the context will never be freed, so make that happen.

Fixes: edf5bf34d4 ("ACPI / dock: Use callback pointers from devices' ACPI hotplug contexts")
Reported-by: Vasily Averin <vvs@virtuozzo.com>
Cc: 3.15+ <stable@vger.kernel.org> # 3.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-06-26 19:42:34 +02:00
Masahiro Yamada a7f7f6248d treewide: replace '---help---' in Kconfig files with 'help'
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

  a) 4 spaces + '---help---'
  b) 7 spaces + '---help---'
  c) 8 spaces + '---help---'
  d) 1 space + 1 tab + '---help---'
  e) 1 tab + '---help---'    (correct indentation)
  f) 1 tab + 1 space + '---help---'
  g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

  $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-14 01:57:21 +09:00
Linus Torvalds 23fc02e36e s390 updates for the 5.8 merge window
- Add support for multi-function devices in pci code.
 
 - Enable PF-VF linking for architectures using the
   pdev->no_vf_scan flag (currently just s390).
 
 - Add reipl from NVMe support.
 
 - Get rid of critical section cleanup in entry.S.
 
 - Refactor PNSO CHSC (perform network subchannel operation) in cio
   and qeth.
 
 - QDIO interrupts and error handling fixes and improvements, more
   refactoring changes.
 
 - Align ioremap() with generic code.
 
 - Accept requests without the prefetch bit set in vfio-ccw.
 
 - Enable path handling via two new regions in vfio-ccw.
 
 - Other small fixes and improvements all over the code.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl7eVGcACgkQjYWKoQLX
 FBhweQgAkicvx31x230rdfG+jQkQkl0UqF99vvWrJHEll77SqadfjzKAGIjUB+K0
 EoeHVD5Wcj7BogDGcyHeQ0bZpu4WzE+y1nmnrsvu7TEEvcBmkJH0rF2jF+y0sb/O
 3qvwFkX/CB5OqaMzKC/AEeRpcCKR+ZUXkWu1irbYth7CBXaycD9EAPc4cj8CfYGZ
 r5njUdYOVk77TaO4aV+t5pCYc5TCRJaWXSsWaAv/nuLcIqsFBYOy2q+L47zITGXp
 utZVanIDjzx+ikpaKicOIfC3hJsRuNX9MnlZKsQFwpVEZAUZmIUm29XdhGJTWSxU
 RV7m1ORINbFP1nGAqWqkOvGo/LC0ZA==
 =VhXR
 -----END PGP SIGNATURE-----

Merge tag 's390-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Vasily Gorbik:

 - Add support for multi-function devices in pci code.

 - Enable PF-VF linking for architectures using the pdev->no_vf_scan
   flag (currently just s390).

 - Add reipl from NVMe support.

 - Get rid of critical section cleanup in entry.S.

 - Refactor PNSO CHSC (perform network subchannel operation) in cio and
   qeth.

 - QDIO interrupts and error handling fixes and improvements, more
   refactoring changes.

 - Align ioremap() with generic code.

 - Accept requests without the prefetch bit set in vfio-ccw.

 - Enable path handling via two new regions in vfio-ccw.

 - Other small fixes and improvements all over the code.

* tag 's390-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (52 commits)
  vfio-ccw: make vfio_ccw_regops variables declarations static
  vfio-ccw: Add trace for CRW event
  vfio-ccw: Wire up the CRW irq and CRW region
  vfio-ccw: Introduce a new CRW region
  vfio-ccw: Refactor IRQ handlers
  vfio-ccw: Introduce a new schib region
  vfio-ccw: Refactor the unregister of the async regions
  vfio-ccw: Register a chp_event callback for vfio-ccw
  vfio-ccw: Introduce new helper functions to free/destroy regions
  vfio-ccw: document possible errors
  vfio-ccw: Enable transparent CCW IPL from DASD
  s390/pci: Log new handle in clp_disable_fh()
  s390/cio, s390/qeth: cleanup PNSO CHSC
  s390/qdio: remove q->first_to_kick
  s390/qdio: fix up qdio_start_irq() kerneldoc
  s390: remove critical section cleanup from entry.S
  s390: add machine check SIGP
  s390/pci: ioremap() align with generic code
  s390/ap: introduce new ap function ap_get_qdev()
  Documentation/s390: Update / remove developerWorks web links
  ...
2020-06-08 12:05:31 -07:00
Linus Torvalds 3925c3bbdf pci-v5.8-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAl7ZUn8UHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vwuyxAAnjyHTbjpLtFcSh1on0Tsehi6hAiV
 o8w40hj3geQv/zVPgRsui3OSE9PTihPacKUQBxs/7M/iSF3cKzQEreYqDNbOMlun
 957X6CD0yTPChjcHy2brFFhQqs6O8Nl/acvkHKKP369nZkost5A2TMHPSKzKajdB
 fYw6imeunIvSpUYH9GlP9CU+suj25UHQqxUUyXAHqmF4R89j3mTpSMYJzq3VN426
 R77xeRC26lUEHepRgEiaFmdEK0zGTp/uXsJQNwaIFduNfX6x6Oo8u9EC4Mrb48g1
 duoxLUV6a8bqpjkwpPfQIv7lw1Mm1mx/vMA040zGVQR98QAMZacCPJO7eVHM/N9/
 m62bymyKHuNxXhWQwbeAyF0ZH+usaCFh7uidd4L0x1Uvs/GNCGD/icuKxHTnRWLv
 1P4bZg0n23YFzE5/eXY2voos+rfrycIoC5gspuJdP/H2Q5UM/EnI1RhizIItuqJY
 ORAdczo7a8oamt90WWZ636HeL1UQIGZjq1iWz2++vRTJGzfLeuOJj76cn2RuDQsZ
 +rBtQ1zH3saEZSARPdS5HQH+SaDxtjfu/AaAz6NDNSvasDLqmjRdOkM6UIU2pqMG
 cE9um1ijcSy2UjUInVPr3Hk7bbbd9YJTQQiWr04uL6ap0JpwRhSPqQpDHtLwLh+E
 R13t08tEMd09730=
 =9ymj
 -----END PGP SIGNATURE-----

Merge tag 'pci-v5.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Program MPS for RCiEP devices (Ashok Raj)

   - Fix pci_register_host_bridge() device_register() error handling
     (Rob Herring)

   - Fix pci_host_bridge struct device release/free handling (Rob
     Herring)

  Resource management:

   - Allow resizing BARs for devices on root bus (Ard Biesheuvel)

  Power management:

   - Reduce Thunderbolt resume time by working around devices that don't
     support DLL Link Active reporting (Mika Westerberg)

   - Work around a Pericom USB controller OHCI/EHCI PME# defect
     (Kai-Heng Feng)

  Virtualization:

   - Add ACS quirk for Intel Root Complex Integrated Endpoints (Ashok
     Raj)

   - Avoid FLR for AMD Starship USB 3.0 (Kevin Buettner)

   - Avoid FLR for AMD Matisse HD Audio & USB 3.0 (Marcos Scriven)

  Error handling:

   - Use only _OSC (not HEST FIRMWARE_FIRST) to determine AER ownership
     (Alexandru Gagniuc, Kuppuswamy Sathyanarayanan)

   - Reduce verbosity by logging only ACPI_NOTIFY_DISCONNECT_RECOVER
     events (Kuppuswamy Sathyanarayanan)

   - Don't enable AER by default in Kconfig (Bjorn Helgaas)

  Peer-to-peer DMA:

   - Add AMD Zen Raven and Renoir Root Ports to whitelist (Alex Deucher)

  ASPM:

   - Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges (Kai-Heng Feng)

  Endpoint framework:

   - Fix DMA channel release in test (Kunihiko Hayashi)

   - Add page size as argument to pci_epc_mem_init() (Lad Prabhakar)

   - Add support to handle multiple base for mapping outbound memory
     (Lad Prabhakar)

  Generic host bridge driver:

   - Support building as module (Rob Herring)

   - Eliminate pci_host_common_probe wrappers (Rob Herring)

  Amlogic Meson PCIe controller driver:

   - Don't use FAST_LINK_MODE to set up link (Marc Zyngier)

  Broadcom STB PCIe controller driver:

   - Disable ASPM L0s if 'aspm-no-l0s' in DT (Jim Quinlan)

   - Fix clk_put() error (Jim Quinlan)

   - Fix window register offset (Jim Quinlan)

   - Assert fundamental reset on initialization (Nicolas Saenz Julienne)

   - Add notify xHCI reset property (Nicolas Saenz Julienne)

   - Add init routine for Raspberry Pi 4 VL805 USB controller (Nicolas
     Saenz Julienne)

   - Sync with Raspberry Pi 4 firmware for VL805 initialization (Nicolas
     Saenz Julienne)

  Cadence PCIe controller driver:

   - Remove "cdns,max-outbound-regions" DT property (replaced by
     "ranges") (Kishon Vijay Abraham I)

   - Read 32-bit (not 16-bit) Vendor ID/Device ID property from DT
     (Kishon Vijay Abraham I)

  Marvell Aardvark PCIe controller driver:

   - Improve link training (Marek Behún)

   - Add PHY support (Marek Behún)

   - Add "phys", "max-link-speed", "reset-gpios" to dt-binding (Marek
     Behún)

   - Train link immediately after enabling training to work around
     detection issues with some cards (Pali Rohár)

   - Issue PERST via GPIO to work around detection issues (Pali Rohár)

   - Don't blindly enable ASPM L0s (Pali Rohár)

   - Replace custom macros by standard linux/pci_regs.h macros (Pali
     Rohár)

  Microsoft Hyper-V host bridge driver:

   - Fix probe failure path to release resource (Wei Hu)

   - Retry PCI bus D0 entry on invalid device state for kdump (Wei Hu)

  Renesas R-Car PCIe controller driver:

   - Fix incorrect programming of OB windows (Andrew Murray)

   - Add suspend/resume (Kazufumi Ikeda)

   - Rename pcie-rcar.c to pcie-rcar-host.c (Lad Prabhakar)

   - Add endpoint controller driver (Lad Prabhakar)

   - Fix PCIEPAMR mask calculation (Lad Prabhakar)

   - Add r8a77961 to DT binding (Yoshihiro Shimoda)

  Socionext UniPhier Pro5 controller driver:

   - Add endpoint controller driver (Kunihiko Hayashi)

  Synopsys DesignWare PCIe controller driver:

   - Program outbound ATU upper limit register (Alan Mikhak)

   - Fix inner MSI IRQ domain registration (Marc Zyngier)

  Miscellaneous:

   - Check for platform_get_irq() failure consistently (negative return
     means failure) (Aman Sharma)

   - Fix several runtime PM get/put imbalances (Dinghao Liu)

   - Use flexible-array and struct_size() helpers for code cleanup
     (Gustavo A. R. Silva)

   - Update & fix issues in bridge emulation of PCIe registers (Jon
     Derrick)

   - Add macros for bridge window names (PCI_BRIDGE_IO_WINDOW, etc)
     (Krzysztof Wilczyński)

   - Work around Intel PCH MROMs that have invalid BARs (Xiaochun Lee)"

* tag 'pci-v5.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (100 commits)
  PCI: uniphier: Add Socionext UniPhier Pro5 PCIe endpoint controller driver
  PCI: Add ACS quirk for Intel Root Complex Integrated Endpoints
  PCI/DPC: Print IRQ number used by port
  PCI/AER: Use "aer" variable for capability offset
  PCI/AER: Remove redundant dev->aer_cap checks
  PCI/AER: Remove redundant pci_is_pcie() checks
  PCI/AER: Remove HEST/FIRMWARE_FIRST parsing for AER ownership
  PCI: tegra: Fix runtime PM imbalance on error
  PCI: vmd: Filter resource type bits from shadow register
  PCI: tegra194: Fix runtime PM imbalance on error
  dt-bindings: PCI: Add UniPhier PCIe endpoint controller description
  PCI: hv: Use struct_size() helper
  PCI: Rename _DSM constants to align with spec
  PCI: Avoid FLR for AMD Starship USB 3.0
  PCI: Avoid FLR for AMD Matisse HD Audio & USB 3.0
  x86/PCI: Drop unused xen_register_pirq() gsi_override parameter
  PCI: dwc: Use private data pointer of "struct irq_domain" to get pcie_port
  PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link
  PCI: dwc: Fix inner MSI IRQ domain registration
  PCI: dwc: pci-dra7xx: Use devm_platform_ioremap_resource_byname()
  ...
2020-06-06 11:01:58 -07:00
Linus Torvalds 118d6e9829 ACPI updates for 5.8-rc1
- Update the ACPICA code in the kernel to upstream revision
    20200430:
 
    * Move acpi_gbl_next_cmd_num definition (Erik Kaneda).
 
    * Ignore AE_ALREADY_EXISTS status in the disassembler when parsing
      create operators (Erik Kaneda).
 
    * Add status checks to the dispatcher (Erik Kaneda).
 
    * Fix required parameters for _NIG and _NIH (Erik Kaneda).
 
    * Make acpi_protocol_lengths static (Yue Haibing).
 
  - Fix ACPI table reference counting errors in several places, mostly
    in error code paths (Hanjun Guo).
 
  - Extend the Generic Event Device (GED) driver to support _Exx and
    _Lxx handler methods (Ard Biesheuvel).
 
  - Add new acpi_evaluate_reg() helper and modify the ACPI PCI hotplug
    code to use it (Hans de Goede).
 
  - Add new DPTF battery participant driver and make the DPFT power
    participant driver create more sysfs device attributes (Srinivas
    Pandruvada).
 
  - Improve the handling of memory failures in APEI (James Morse).
 
  - Add new blacklist entry for Acer TravelMate 5735Z to the backlight
    driver (Paul Menzel).
 
  - Add i2c address for thermal control to the PMIC driver (Mauro
    Carvalho Chehab).
 
  - Allow the ACPI processor idle driver to work on platforms with
    only one ACPI C-state present (Zhang Rui).
 
  - Fix kobject reference count leaks in error code paths in two
    places (Qiushi Wu).
 
  - Delete unused proc filename macros and make some symbols static
    (Pascal Terjan, Zheng Zengkai, Zou Wei).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl7VHb8SHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxVboQAIjYda2RhQANIlIvoEa+Qd2/FBd3HXgU
 Mv0LZ6y1xxxEZYeKne7zja1hzt5WetuZ1hZHGfg8YkXyrLqZGxfCIFbbhSA90BGG
 PGzFerGmOBNzB3I9SN6iQY7vSqoFHvQEV1PVh24d+aHWZqj2lnaRRq+GT54qbRLX
 /U3Hy5glFl8A/DCBP4cpoEjDr4IJHY68DathkDK2Ep2ybXV6B401uuqx8Su/OBd/
 MQmJTYI1UK/RYBXfdzS9TIZahnkxBbU1cnLFy08Ve2mawl5YsHPEbvm77a0yX2M6
 sOAerpgyzYNivAuOLpNIwhUZjpOY66nQuKAQaEl2cfRUkqt4nbmq7yDoH3d2MJLC
 /Ccz955rV2YyD1DtyV+PyT+HB+/EVwH/+UCZ+gsSbdHvOiwdFU6VaTc2eI1qq8K9
 4m5eEZFrAMPlvTzj/xVxr2Hfw1lbm23J5B5n7sM5HzYbT6MUWRQpvfV4zM3jTGz0
 rQd8JmcHVvZk/MV1mGrYHrN5TnGTLWpbS4Yv1lAQa6FP0N0NxzVud7KRfLKnCnJ1
 vh5yzW2fCYmVulJpuqxJDfXSqNV7n40CFrIewSp6nJRQXnWpImqHwwiA8fl51+hC
 fBL72Ey08EHGFnnNQqbebvNglsodRWJddBy43ppnMHtuLBA/2GVKYf2GihPbpEBq
 NHtX+Rd3vlWW
 =xH3i
 -----END PGP SIGNATURE-----

Merge tag 'acpi-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "These update the ACPICA code in the kernel to upstream revision
  20200430, fix several reference counting errors related to ACPI
  tables, add _Exx / _Lxx support to the GED driver, add a new
  acpi_evaluate_reg() helper, add new DPTF battery participant driver
  and extend the DPFT power participant driver, improve the handling of
  memory failures in the APEI code, add a blacklist entry to the
  backlight driver, update the PMIC driver and the processor idle
  driver, fix two kobject reference count leaks, and make a few janitory
  changes.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20200430:

      - Move acpi_gbl_next_cmd_num definition (Erik Kaneda).

      - Ignore AE_ALREADY_EXISTS status in the disassembler when parsing
        create operators (Erik Kaneda).

      - Add status checks to the dispatcher (Erik Kaneda).

      - Fix required parameters for _NIG and _NIH (Erik Kaneda).

      - Make acpi_protocol_lengths static (Yue Haibing).

   - Fix ACPI table reference counting errors in several places, mostly
     in error code paths (Hanjun Guo).

   - Extend the Generic Event Device (GED) driver to support _Exx and
     _Lxx handler methods (Ard Biesheuvel).

   - Add new acpi_evaluate_reg() helper and modify the ACPI PCI hotplug
     code to use it (Hans de Goede).

   - Add new DPTF battery participant driver and make the DPFT power
     participant driver create more sysfs device attributes (Srinivas
     Pandruvada).

   - Improve the handling of memory failures in APEI (James Morse).

   - Add new blacklist entry for Acer TravelMate 5735Z to the backlight
     driver (Paul Menzel).

   - Add i2c address for thermal control to the PMIC driver (Mauro
     Carvalho Chehab).

   - Allow the ACPI processor idle driver to work on platforms with only
     one ACPI C-state present (Zhang Rui).

   - Fix kobject reference count leaks in error code paths in two places
     (Qiushi Wu).

   - Delete unused proc filename macros and make some symbols static
     (Pascal Terjan, Zheng Zengkai, Zou Wei)"

* tag 'acpi-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
  ACPI: CPPC: Fix reference count leak in acpi_cppc_processor_probe()
  ACPI: sysfs: Fix reference count leak in acpi_sysfs_add_hotplug_profile()
  ACPI: GED: use correct trigger type field in _Exx / _Lxx handling
  ACPI: DPTF: Add battery participant driver
  ACPI: DPTF: Additional sysfs attributes for power participant driver
  ACPI: video: Use native backlight on Acer TravelMate 5735Z
  arm64: acpi: Make apei_claim_sea() synchronise with APEI's irq work
  ACPI: APEI: Kick the memory_failure() queue for synchronous errors
  mm/memory-failure: Add memory_failure_queue_kick()
  ACPI / PMIC: Add i2c address for thermal control
  ACPI: GED: add support for _Exx / _Lxx handler methods
  ACPI: Delete unused proc filename macros
  ACPI: hotplug: PCI: Use the new acpi_evaluate_reg() helper
  ACPI: utils: Add acpi_evaluate_reg() helper
  ACPI: debug: Make two functions static
  ACPI: sleep: Put the FACS table after using it
  ACPI: scan: Put SPCR and STAO table after using it
  ACPI: EC: Put the ACPI table after using it
  ACPI: APEI: Put the HEST table for error path
  ACPI: APEI: Put the error record serialization table for error path
  ...
2020-06-02 13:25:52 -07:00
Krzysztof Wilczynski cfbd83d02d PCI: shpchp: Make shpchp_unconfigure_device() void
shpchp_unconfigure_device() always returned 0, so there's no reason for a
return value.  In addition, remove_board() checked the return value for
possible error which is unnecessary.

Convert shpchp_unconfigure_device() to a void function and remove the
return value check.  This addresses the following Coccinelle warning:

  drivers/pci/hotplug/shpchp_pci.c:66:5-7: Unneeded variable: "rc".  Return "0" on line 86

Link: https://lore.kernel.org/r/20200521190457.1066600-1-kw@linux.com
Signed-off-by: Krzysztof Wilczynski <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-05-21 15:23:20 -05:00
Hans de Goede 6dd10c47e9 ACPI: hotplug: PCI: Use the new acpi_evaluate_reg() helper
Use the new acpi_evaluate_reg() helper in the acpiphp_glue.c code.

Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-09 11:40:25 +02:00
Pierre Morel 53dd462ac4 s390/pci: Do not disable PF when VFs exist
The Physical function should not be disabled until no virtual
functions depends on it.
Let's force the user to first use echo 0 > sriov_numfs before
allowing to disable the PF with echo 0 > power.

Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-04-28 13:49:47 +02:00
Pierre Morel 44510d6fa0 s390/pci: Handling multifunctions
We allow multiple functions on a single bus.
We suppress the ZPCI_DEVFN definition and replace its
occurences with zpci->devfn.

We verify the number of device during the registration.

There can never be more domains in use than existing
devices, so we do not need to verify the count of domain
after having verified the count of devices.

Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-04-28 13:49:47 +02:00
Pierre Morel 05bc1be6db s390/pci: create zPCI bus
The zPCI bus is in charge to handle common zPCI resources for
zPCI devices.

Creating the zPCI bus, the PCI bus, the zPCI devices and the
PCI devices and hotplug slots
done in a specific order:
- PCI hotplug slot creation needs a PCI bus
- PCI bus needs a PCI domain
  which is reported by the pci_domain_nr() when setting up the
  host bridge
- PCI domain is set from the zPCI with devfn 0
  this is necessary to have a reproducible enumeration

Therefore we can not create devices or hotplug slots for any PCI
device associated with a zPCI device before having discovered
the function zero of the bus.

The discovery and initialization of devices can be done at several
points in the code:
- On Events, serialized in a thread context
- On initialization, in the kernel init thread context
- When powering on the hotplug slot, in a user thread context

The removal of devices and their parent bus may also be done on
events or for devices when powering down the slot.

To guarantee the existence of the bus and devices until they are
no more needed we use kref in zPCI bus and introduce a reference
count in the zPCI devices.

In this patch the zPCI bus still only accept a device with
a devfn 0.

Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-04-28 13:49:46 +02:00
Rob Herring adc9fbcd7d PCI: Use of_node_name_eq() for node name comparisons
Convert string compares of DT node names to use of_node_name_eq() helper
instead. This removes direct access to the node name pointer.

Link: https://lore.kernel.org/r/20200416215114.7715-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
2020-04-24 18:02:17 -05:00