Граф коммитов

420 Коммитов

Автор SHA1 Сообщение Дата
Richard Guy Briggs f910fde730 audit: add kernel set-up parameter to override default backlog limit
The default audit_backlog_limit is 64.  This was a reasonable limit at one time.

systemd causes so much audit queue activity on startup that auditd doesn't
start before the backlog queue has already overflowed by more than a factor of
2.  On a system with audit= not set on the kernel command line, this isn't an
issue since that history isn't kept for auditd when it is available.  On a
system with audit=1 set on the kernel command line, kaudit tries to keep that
history until auditd is able to drain the queue.

This default can be changed by the "-b" option in audit.rules once the system
has booted, but won't help with lost messages on boot.

One way to solve this would be to increase the default backlog queue size to
avoid losing any messages before auditd is able to consume them.  This would
be overkill to the embedded community and insufficient for some servers.

Another way to solve it might be to add a kconfig option to set the default
based on the system type.  An embedded system would get the current (or
smaller) default, while Workstations might get more than now and servers might
get more.

None of these solutions helps if a system's compiled default is too small to
see the lost messages without compiling a new kernel.

This patch adds a kernel set-up parameter (audit already has one to
enable/disable it) "audit_backlog_limit=<n>" that overrides the default to
allow the system administrator to set the backlog limit.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:28:31 -05:00
Dan Duval 7ecf69bf50 audit: efficiency fix 2: request exclusive wait since all need same resource
These and similar errors were seen on a patched 3.8 kernel when the
audit subsystem was overrun during boot:

  udevd[876]: worker [887] unexpectedly returned with status 0x0100
  udevd[876]: worker [887] failed while handling
'/devices/pci0000:00/0000:00:03.0/0000:40:00.0'
  udevd[876]: worker [880] unexpectedly returned with status 0x0100
  udevd[876]: worker [880] failed while handling
'/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1'

  udevadm settle - timeout of 180 seconds reached, the event queue
contains:
    /sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1 (3995)
    /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/INT3F0D:00 (4034)

  audit: audit_backlog=258 > audit_backlog_limit=256
  audit: audit_lost=1 audit_rate_limit=0 audit_backlog_limit=256

The change below increases the efficiency of the audit code and prevents it
from being overrun:

Use add_wait_queue_exclusive() in wait_for_auditd() to put the
thread on the wait queue.  When kauditd dequeues an skb, all
of the waiting threads are waiting for the same resource, but
only one is going to get it, so there's no need to wake up
more than one waiter.

See: https://lkml.org/lkml/2013/9/2/479

Signed-off-by: Dan Duval <dan.duval@oracle.com>
Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:28:19 -05:00
Dan Duval db89731940 audit: efficiency fix 1: only wake up if queue shorter than backlog limit
These and similar errors were seen on a patched 3.8 kernel when the
audit subsystem was overrun during boot:

  udevd[876]: worker [887] unexpectedly returned with status 0x0100
  udevd[876]: worker [887] failed while handling
'/devices/pci0000:00/0000:00:03.0/0000:40:00.0'
  udevd[876]: worker [880] unexpectedly returned with status 0x0100
  udevd[876]: worker [880] failed while handling
'/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1'

  udevadm settle - timeout of 180 seconds reached, the event queue
contains:
    /sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1 (3995)
    /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/INT3F0D:00 (4034)

  audit: audit_backlog=258 > audit_backlog_limit=256
  audit: audit_lost=1 audit_rate_limit=0 audit_backlog_limit=256

The change below increases the efficiency of the audit code and prevents it
from being overrun:

Only issue a wake_up in kauditd if the length of the skb queue is less than the
backlog limit.  Otherwise, threads waiting in wait_for_auditd() will simply
wake up, discover that the queue is still too long for them to proceed, and go
back to sleep.  This results in wasted context switches and machine cycles.
kauditd_thread() is the only function that removes buffers from audit_skb_queue
so we can't race.  If we did, the timeout in wait_for_auditd() would expire and
the waiting thread would continue.

See: https://lkml.org/lkml/2013/9/2/479

Signed-off-by: Dan Duval <dan.duval@oracle.com>
Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:28:08 -05:00
Richard Guy Briggs ae887e0bdc audit: make use of remaining sleep time from wait_for_auditd
If wait_for_auditd() times out, go immediately to the error function rather
than retesting the loop conditions.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:27:53 -05:00
Richard Guy Briggs e789e561a5 audit: reset audit backlog wait time after error recovery
When the audit queue overflows and times out (audit_backlog_wait_time), the
audit queue overflow timeout is set to zero.  Once the audit queue overflow
timeout condition recovers, the timeout should be reset to the original value.

See also:
	https://lkml.org/lkml/2013/9/2/473

Cc: stable@vger.kernel.org # v3.8-rc4+
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Dan Duval <dan.duval@oracle.com>
Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:27:30 -05:00
Richard Guy Briggs 33faba7fa7 audit: listen in all network namespaces
Convert audit from only listening in init_net to use register_pernet_subsys()
to dynamically manage the netlink socket list.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:27:24 -05:00
Richard Guy Briggs 2f2ad10133 audit: restore order of tty and ses fields in log output
When being refactored from audit_log_start() to audit_log_task_info(), in
commit e23eb920 the tty and ses fields in the log output got transposed.
Restore to original order to avoid breaking search tools.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:27:16 -05:00
Richard Guy Briggs f9441639e6 audit: fix netlink portid naming and types
Normally, netlink ports use the PID of the userspace process as the port ID.
If the PID is already in use by a port, the kernel will allocate another port
ID to avoid conflict.  Re-name all references to netlink ports from pid to
portid to reflect this reality and avoid confusion with actual PIDs.  Ports
use the __u32 type, so re-type all portids accordingly.

(This patch is very similar to ebiederman's 5deadd69)

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13 22:26:52 -05:00
Eric Paris fc582aef7d Linux 3.12
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQEcBAABAgAGBQJSdt9HAAoJEHm+PkMAQRiGnzEH/345Keg5dp+oKACnokBfzOtp
 V0p3g5EBsGtzEVnV+1B96trczDUtWdDFFr5GfGSj565NBQpFyc+iZC1mC99RDJCs
 WUquGFqlLMK2aV0SbKwCO4K1rJ5A0TRVj0ZRJOUJUY7jwNf5Qahny0WBVjO/8qAY
 UvJK1rktBClhKdH53YtpDHHgXBeZ2LOrzt1fQ/AMpujGbZauGvnLdNOli5r2kCFK
 jzoOgFLvX+PHU/5/d4/QyJPeQNPva5hjk5Ho9UuSJYhnFtPO3EkD4XZLcpcbNEJb
 LqBvbnZWm6CS435lfU1l93RqQa5xMO9ITk0oe4h69syTSHwWk9aJ+ZTc/4Up+t8=
 =57MC
 -----END PGP SIGNATURE-----

Merge tag 'v3.12'

Linux 3.12

Conflicts:
	fs/exec.c
2013-11-22 18:57:54 -05:00
Jeff Layton d3aea84a4a audit: log the audit_names record type
...to make it clear what the intent behind each record's operation was.

In many cases you can infer this, based on the context of the syscall
and the result. In other cases it's not so obvious. For instance, in
the case where you have a file being renamed over another, you'll have
two different records with the same filename but different inode info.
By logging this information we can clearly tell which one was created
and which was deleted.

This fixes what was broken in commit bfcec708.
Commit 79f6530c should also be backported to stable v3.7+.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05 11:09:04 -05:00
Richard Guy Briggs b95d77fe34 audit: use given values in tty_audit enable api
In send/GET, we don't want the kernel to lie about what value is set.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05 11:08:42 -05:00
Mathias Krause 4d8fe7376a audit: use nlmsg_len() to get message payload length
Using the nlmsg_len member of the netlink header to test if the message
is valid is wrong as it includes the size of the netlink header itself.
Thereby allowing to send short netlink messages that pass those checks.

Use nlmsg_len() instead to test for the right message length. The result
of nlmsg_len() is guaranteed to be non-negative as the netlink message
already passed the checks of nlmsg_ok().

Also switch to min_t() to please checkpatch.pl.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: stable@vger.kernel.org  # v2.6.6+ for the 1st hunk, v2.6.23+ for the 2nd
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05 11:08:37 -05:00
Eric Paris e13f91e3c5 audit: use memset instead of trying to initialize field by field
We currently are setting fields to 0 to initialize the structure
declared on the stack.  This is a bad idea as if the structure has holes
or unpacked space these will not be initialized.  Just use memset.  This
is not a performance critical section of code.

Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05 11:08:35 -05:00
Mathias Krause 64fbff9ae0 audit: fix info leak in AUDIT_GET requests
We leak 4 bytes of kernel stack in response to an AUDIT_GET request as
we miss to initialize the mask member of status_set. Fix that.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: stable@vger.kernel.org  # v2.6.6+
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05 11:08:30 -05:00
Eric Paris 21b85c31d2 audit: audit feature to set loginuid immutable
This adds a new 'audit_feature' bit which allows userspace to set it
such that the loginuid is absolutely immutable, even if you have
CAP_AUDIT_CONTROL.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05 11:08:17 -05:00
Eric Paris d040e5af38 audit: audit feature to only allow unsetting the loginuid
This is a new audit feature which only grants processes with
CAP_AUDIT_CONTROL the ability to unset their loginuid.  They cannot
directly set it from a valid uid to another valid uid.  The ability to
unset the loginuid is nice because a priviledged task, like that of
container creation, can unset the loginuid and then priv is not needed
inside the container when a login daemon needs to set the loginuid.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05 11:08:13 -05:00
Eric Paris b0fed40214 audit: implement generic feature setting and retrieving
The audit_status structure was not designed with extensibility in mind.
Define a new AUDIT_SET_FEATURE message type which takes a new structure
of bits where things can be enabled/disabled/locked one at a time.  This
structure should be able to grow in the future while maintaining forward
and backward compatibility (based loosly on the ideas from capabilities
and prctl)

This does not actually add any features, but is just infrastructure to
allow new on/off types of audit system features.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05 11:07:30 -05:00
Tyler Hicks 0868a5e150 audit: printk USER_AVC messages when audit isn't enabled
When the audit=1 kernel parameter is absent and auditd is not running,
AUDIT_USER_AVC messages are being silently discarded.

AUDIT_USER_AVC messages should be sent to userspace using printk(), as
mentioned in the commit message of 4a4cd633 ("AUDIT: Optimise the
audit-disabled case for discarding user messages").

When audit_enabled is 0, audit_receive_msg() discards all user messages
except for AUDIT_USER_AVC messages. However, audit_log_common_recv_msg()
refuses to allocate an audit_buffer if audit_enabled is 0. The fix is to
special case AUDIT_USER_AVC messages in both functions.

It looks like commit 50397bd1 ("[AUDIT] clean up audit_receive_msg()")
introduced this bug.

Cc: <stable@kernel.org> # v2.6.25+
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: linux-audit@redhat.com
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05 11:07:23 -05:00
Gao feng af0e493d30 Audit: remove duplicate comments
Remove it.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05 11:07:14 -05:00
Richard Guy Briggs b8f89caafe audit: remove newline accidentally added during session id helper refactor
A newline was accidentally added during session ID helper refactorization in
commit 4d3fb709.  This needlessly uses up buffer space, messes up syslog
formatting and makes userspace processing less efficient.  Remove it.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05 11:07:09 -05:00
Ilya V. Matveychikov 47145705e3 audit: remove duplicate inclusion of the netlink header
Signed-off-by: Ilya V. Matveychikov <matvejchikov@gmail.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05 11:06:53 -05:00
Richard Guy Briggs b50eba7e2d audit: format user messages to size of MAX_AUDIT_MESSAGE_LENGTH
Messages of type AUDIT_USER_TTY were being formatted to 1024 octets,
truncating messages approaching MAX_AUDIT_MESSAGE_LENGTH (8970 octets).

Set the formatting to 8560 characters, given maximum estimates for prefix and
suffix budgets.

See the problem discussion:
https://www.redhat.com/archives/linux-audit/2009-January/msg00030.html

And the new size rationale:
https://www.redhat.com/archives/linux-audit/2013-September/msg00016.html

Test ~8k messages with:
auditctl -m "$(for i in $(seq -w 001 820);do echo -n "${i}0______";done)"

Reported-by: LC Bruzenak <lenny@magitekltd.com>
Reported-by: Justin Stephenson <jstephen@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05 11:06:49 -05:00
Konstantin Khlebnikov 8ac1c8d5de audit: fix endless wait in audit_log_start()
After commit 829199197a ("kernel/audit.c: avoid negative sleep
durations") audit emitters will block forever if userspace daemon cannot
handle backlog.

After the timeout the waiting loop turns into busy loop and runs until
daemon dies or returns back to work.  This is a minimal patch for that
bug.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Richard Guy Briggs <rgb@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Chuck Anderson <chuck.anderson@oracle.com>
Cc: Dan Duval <dan.duval@oracle.com>
Cc: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-24 17:00:26 -07:00
Oleg Nesterov f000cfdde5 audit: wait_for_auditd() should use TASK_UNINTERRUPTIBLE
audit_log_start() does wait_for_auditd() in a loop until
audit_backlog_wait_time passes or audit_skb_queue has a room.

If signal_pending() is true this becomes a busy-wait loop, schedule() in
TASK_INTERRUPTIBLE won't block.

Thanks to Guy for fully investigating and explaining the problem.

(akpm: that'll cause the system to lock up on a non-preemptible
uniprocessor kernel)

(Guy: "Our customer was in fact running a uniprocessor machine, and they
reported a system hang.")

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Guy Streeter <streeter@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-12 16:29:45 -07:00
Linus Torvalds c4cc75c332 Merge git://git.infradead.org/users/eparis/audit
Pull audit changes from Eric Paris:
 "Al used to send pull requests every couple of years but he told me to
  just start pushing them to you directly.

  Our touching outside of core audit code is pretty straight forward.  A
  couple of interface changes which hit net/.  A simple argument bug
  calling audit functions in namei.c and the removal of some assembly
  branch prediction code on ppc"

* git://git.infradead.org/users/eparis/audit: (31 commits)
  audit: fix message spacing printing auid
  Revert "audit: move kaudit thread start from auditd registration to kaudit init"
  audit: vfs: fix audit_inode call in O_CREAT case of do_last
  audit: Make testing for a valid loginuid explicit.
  audit: fix event coverage of AUDIT_ANOM_LINK
  audit: use spin_lock in audit_receive_msg to process tty logging
  audit: do not needlessly take a lock in tty_audit_exit
  audit: do not needlessly take a spinlock in copy_signal
  audit: add an option to control logging of passwords with pam_tty_audit
  audit: use spin_lock_irqsave/restore in audit tty code
  helper for some session id stuff
  audit: use a consistent audit helper to log lsm information
  audit: push loginuid and sessionid processing down
  audit: stop pushing loginid, uid, sessionid as arguments
  audit: remove the old depricated kernel interface
  audit: make validity checking generic
  audit: allow checking the type of audit message in the user filter
  audit: fix build break when AUDIT_DEBUG == 2
  audit: remove duplicate export of audit_enabled
  Audit: do not print error when LSMs disabled
  ...
2013-05-11 14:29:11 -07:00
Eric Paris 2a0b4be6dd audit: fix message spacing printing auid
The helper function didn't include a leading space, so it was jammed
against the previous text in the audit record.

Signed-off-by: Eric Paris <eparis@redhat.com>
2013-05-08 00:02:19 -04:00
Eric Paris 82d8da0d46 Revert "audit: move kaudit thread start from auditd registration to kaudit init"
This reverts commit 6ff5e45985.

Conflicts:
	kernel/audit.c

This patch was starting a kthread for all the time.  Since the follow on
patches that required it didn't get finished in 3.10 time, we shouldn't
ship this change in 3.10.

Signed-off-by: Eric Paris <eparis@redhat.com>
2013-05-07 22:27:21 -04:00
Linus Torvalds 73287a43cc Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Highlights (1721 non-merge commits, this has to be a record of some
  sort):

   1) Add 'random' mode to team driver, from Jiri Pirko and Eric
      Dumazet.

   2) Make it so that any driver that supports configuration of multiple
      MAC addresses can provide the forwarding database add and del
      calls by providing a default implementation and hooking that up if
      the driver doesn't have an explicit set of handlers.  From Vlad
      Yasevich.

   3) Support GSO segmentation over tunnels and other encapsulating
      devices such as VXLAN, from Pravin B Shelar.

   4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton.

   5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita
      Dukkipati.

   6) In the PHY layer, allow supporting wake-on-lan in situations where
      the PHY registers have to be written for it to be configured.

      Use it to support wake-on-lan in mv643xx_eth.

      From Michael Stapelberg.

   7) Significantly improve firewire IPV6 support, from YOSHIFUJI
      Hideaki.

   8) Allow multiple packets to be sent in a single transmission using
      network coding in batman-adv, from Martin Hundebøll.

   9) Add support for T5 cxgb4 chips, from Santosh Rastapur.

  10) Generalize the VXLAN forwarding tables so that there is more
      flexibility in configurating various aspects of the endpoints.
      From David Stevens.

  11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver,
      from Dmitry Kravkov.

  12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo
      Neira Ayuso.

  13) Start adding networking selftests.

  14) In situations of overload on the same AF_PACKET fanout socket, or
      per-cpu packet receive queue, minimize drop by distributing the
      load to other cpus/fanouts.  From Willem de Bruijn and Eric
      Dumazet.

  15) Add support for new payload offset BPF instruction, from Daniel
      Borkmann.

  16) Convert several drivers over to mdoule_platform_driver(), from
      Sachin Kamat.

  17) Provide a minimal BPF JIT image disassembler userspace tool, from
      Daniel Borkmann.

  18) Rewrite F-RTO implementation in TCP to match the final
      specification of it in RFC4138 and RFC5682.  From Yuchung Cheng.

  19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear
      you like netlink, so I implemented netlink dumping of netlink
      sockets.") From Andrey Vagin.

  20) Remove ugly passing of rtnetlink attributes into rtnl_doit
      functions, from Thomas Graf.

  21) Allow userspace to be able to see if a configuration change occurs
      in the middle of an address or device list dump, from Nicolas
      Dichtel.

  22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes
      Frederic Sowa.

  23) Increase accuracy of packet length used by packet scheduler, from
      Jason Wang.

  24) Beginning set of changes to make ipv4/ipv6 fragment handling more
      scalable and less susceptible to overload and locking contention,
      from Jesper Dangaard Brouer.

  25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*()
      instead.  From Hong Zhiguo.

  26) Optimize route usage in IPVS by avoiding reference counting where
      possible, from Julian Anastasov.

  27) Convert IPVS schedulers to RCU, also from Julian Anastasov.

  28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger
      Eitzenberger.

  29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG,
      nfnetlink_log, and nfnetlink_queue.  From Gao feng.

  30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa.

  31) Support several new r8169 chips, from Hayes Wang.

  32) Support tokenized interface identifiers in ipv6, from Daniel
      Borkmann.

  33) Use usbnet_link_change() helper in USB net driver, from Ming Lei.

  34) Add 802.1ad vlan offload support, from Patrick McHardy.

  35) Support mmap() based netlink communication, also from Patrick
      McHardy.

  36) Support HW timestamping in mlx4 driver, from Amir Vadai.

  37) Rationalize AF_PACKET packet timestamping when transmitting, from
      Willem de Bruijn and Daniel Borkmann.

  38) Bring parity to what's provided by /proc/net/packet socket dumping
      and the info provided by netlink socket dumping of AF_PACKET
      sockets.  From Nicolas Dichtel.

  39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin
      Poirier"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits)
  filter: fix va_list build error
  af_unix: fix a fatal race with bit fields
  bnx2x: Prevent memory leak when cnic is absent
  bnx2x: correct reading of speed capabilities
  net: sctp: attribute printl with __printf for gcc fmt checks
  netlink: kconfig: move mmap i/o into netlink kconfig
  netpoll: convert mutex into a semaphore
  netlink: Fix skb ref counting.
  net_sched: act_ipt forward compat with xtables
  mlx4_en: fix a build error on 32bit arches
  Revert "bnx2x: allow nvram test to run when device is down"
  bridge: avoid OOPS if root port not found
  drivers: net: cpsw: fix kernel warn on cpsw irq enable
  sh_eth: use random MAC address if no valid one supplied
  3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA)
  tg3: fix to append hardware time stamping flags
  unix/stream: fix peeking with an offset larger than data in queue
  unix/dgram: fix peeking with an offset larger than data in queue
  unix/dgram: peek beyond 0-sized skbs
  openvswitch: Remove unneeded ovs_netdev_get_ifindex()
  ...
2013-05-01 14:08:52 -07:00
Eric Paris b24a30a730 audit: fix event coverage of AUDIT_ANOM_LINK
The userspace audit tools didn't like the existing formatting of the
AUDIT_ANOM_LINK event. It needed to be expanded to emit an AUDIT_PATH
event as well, so this implements the change. The bulk of the patch is
moving code out of auditsc.c into audit.c and audit.h for general use.
It expands audit_log_name to include an optional "struct path" argument
for the simple case of just needing to report a pathname. This also
makes
audit_log_task_info available when syscall auditing is not enabled,
since
it is needed in either case for process details.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Steve Grubb <sgrubb@redhat.com>
2013-04-30 15:31:28 -04:00
Eric Paris 7173c54e3a audit: use spin_lock in audit_receive_msg to process tty logging
This function is called when we receive a netlink message from
userspace.  We don't need to worry about it coming from irq context or
irqs making it re-entrant.

Signed-off-by: Eric Paris <eparis@redhat.com>
2013-04-30 15:31:28 -04:00
Richard Guy Briggs 46e959ea29 audit: add an option to control logging of passwords with pam_tty_audit
Most commands are entered one line at a time and processed as complete lines
in non-canonical mode.  Commands that interactively require a password, enter
canonical mode to do this while shutting off echo.  This pair of features
(icanon and !echo) can be used to avoid logging passwords by audit while still
logging the rest of the command.

Adding a member (log_passwd) to the struct audit_tty_status passed in by
pam_tty_audit allows control of canonical mode without echo per task.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2013-04-30 15:31:28 -04:00
Eric Paris bde02ca858 audit: use spin_lock_irqsave/restore in audit tty code
Some of the callers of the audit tty function use spin_lock_irqsave/restore.
We were using the forced always enable version, which seems really bad.
Since I don't know every one of these code paths well enough, it makes
sense to just switch everything to the safe version.  Maybe it's a
little overzealous, but it's a lot better than an unlucky deadlock when
we return to a caller with irq enabled and they expect it to be
disabled.

Signed-off-by: Eric Paris <eparis@redhat.com>
2013-04-30 15:31:28 -04:00
Eric Paris 4d3fb709b2 helper for some session id stuff 2013-04-30 15:31:28 -04:00
Eric Paris b122c3767c audit: use a consistent audit helper to log lsm information
We have a number of places we were reimplementing the same code to write
out lsm labels.  Just do it one darn place.

Signed-off-by: Eric Paris <eparis@redhat.com>
2013-04-30 15:31:28 -04:00
Eric Paris 152f497b9b audit: push loginuid and sessionid processing down
Since we are always current, we can push a lot of this stuff to the
bottom and get rid of useless interfaces and arguments.

Signed-off-by: Eric Paris <eparis@redhat.com>
2013-04-30 15:31:28 -04:00
Eric Paris dc9eb698f4 audit: stop pushing loginid, uid, sessionid as arguments
We always use current.  Stop pulling this when the skb comes in and
pushing it around as arguments.  Just get it at the end when you need
it.

Signed-off-by: Eric Paris <eparis@redhat.com>
2013-04-30 15:31:28 -04:00
Eric Paris 1890090916 audit: remove the old depricated kernel interface
We used to have an inflexible mechanism to add audit rules to the
kernel.  It hasn't been used in a long time.  Get rid of that stuff.

Signed-off-by: Eric Paris <eparis@redhat.com>
2013-04-30 15:31:28 -04:00
Gao feng 13f51e1c3f audit: don't check if kauditd is valid every time
We only need to check if kauditd is valid after we start it, if kauditd
is invalid, we will set kauditd_task to NULL.  So next time, we will
start kauditd again.

It means if kauditd_task is not NULL,it must be valid.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 15:54:26 -07:00
Eric Paris 62062cf8a3 audit: allow checking the type of audit message in the user filter
When userspace sends messages to the audit system it includes a type.
We want to be able to filter messages based on that type without have to
do the all or nothing option currently available on the
AUDIT_FILTER_TYPE filter list.  Instead we should be able to use the
AUDIT_FILTER_USER filter list and just use the message type as one part
of the matching decision.

Signed-off-by: Eric Paris <eparis@redhat.com>
2013-04-16 17:28:49 -04:00
Eric Paris f7616102d6 audit: use data= not msg= for AUDIT_USER_TTY messages
Userspace parsing libraries assume that msg= is only for userspace audit
records, not for user tty records.  Make this consistent with the other
tty records.

Reported-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2013-04-11 11:26:03 -04:00
Richard Guy Briggs 6ff5e45985 audit: move kaudit thread start from auditd registration to kaudit init
The kauditd_thread() task was started only after the auditd userspace daemon
registers itself with kaudit.  This was fine when only auditd consumed messages
from the kaudit netlink unicast socket.  With the addition of a multicast group
to that socket it is more convenient to have the thread start on init of the
kaudit kernel subsystem.

Signed-off-by: Richard Guy Briggs <rbriggs@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2013-04-08 16:19:18 -04:00
Richard Guy Briggs 3320c5133d audit: flatten kauditd_thread wait queue code
The wait queue control code in kauditd_thread() was nested deeper than
necessary.  The function has been flattened for better legibility.

Signed-off-by: Richard Guy Briggs <rbriggs@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2013-04-08 16:19:17 -04:00
Richard Guy Briggs b551d1d981 audit: refactor hold queue flush
The hold queue flush code is an autonomous chunk of code that can be
refactored, removed from kauditd_thread() into flush_hold_queue() and
flattenned for better legibility.

Signed-off-by: Richard Guy Briggs <rbriggs@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2013-04-08 16:19:16 -04:00
Alexandru Copot 2851da5703 audit: pass int* to nlmsg_next
Commit 9419121330 replaced the macros
NLMSG_NEXT with calls to nlmsg_next which produces this warning:

kernel/audit.c: In function ‘audit_receive_skb’:
kernel/audit.c:928:3: warning: passing argument 2 of ‘nlmsg_next’ makes pointer from integer without a cast
In file included from include/net/rtnetlink.h:5:0,
                 from include/net/neighbour.h:28,
                 from include/net/dst.h:17,
                 from include/net/sock.h:68,
                 from kernel/audit.c:55:
include/net/netlink.h:359:1: note: expected ‘int *’ but argument is of type ‘int’

Fix this by sending the intended pointer.

Signed-off-by: Alexandru Copot <alex.mihai.c@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-28 17:40:08 -04:00
Hong zhi guo 9419121330 audit: replace obsolete NLMSG_* with type safe nlmsg_*
Signed-off-by: Hong Zhiguo <honkiko@gmail.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-28 14:25:49 -04:00
Andrew Morton 829199197a kernel/audit.c: avoid negative sleep durations
audit_log_start() performs the same jiffies comparison in two places.
If sufficient time has elapsed between the two comparisons, the second
one produces a negative sleep duration:

  schedule_timeout: wrong timeout value fffffffffffffff0
  Pid: 6606, comm: trinity-child1 Not tainted 3.8.0-rc1+ #43
  Call Trace:
    schedule_timeout+0x305/0x340
    audit_log_start+0x311/0x470
    audit_log_exit+0x4b/0xfb0
    __audit_syscall_exit+0x25f/0x2c0
    sysret_audit+0x17/0x21

Fix it by performing the comparison a single time.

Reported-by: Dave Jones <davej@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-11 14:54:56 -08:00
Kees Cook 0644ec0cc8 audit: catch possible NULL audit buffers
It's possible for audit_log_start() to return NULL.  Handle it in the
various callers.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: Jeff Layton <jlayton@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Julien Tinnes <jln@google.com>
Cc: Will Drewry <wad@google.com>
Cc: Steve Grubb <sgrubb@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-11 14:54:55 -08:00
Sasha Levin d1c7d97ad5 fs: handle failed audit_log_start properly
audit_log_start() may return NULL, this is unchecked by the caller in
audit_log_link_denied() and could cause a NULL ptr deref.

Introduced by commit a51d9eaa ("fs: add link restriction audit reporting").

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-09 23:33:37 -04:00
Linus Torvalds aecdc33e11 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking changes from David Miller:

 1) GRE now works over ipv6, from Dmitry Kozlov.

 2) Make SCTP more network namespace aware, from Eric Biederman.

 3) TEAM driver now works with non-ethernet devices, from Jiri Pirko.

 4) Make openvswitch network namespace aware, from Pravin B Shelar.

 5) IPV6 NAT implementation, from Patrick McHardy.

 6) Server side support for TCP Fast Open, from Jerry Chu and others.

 7) Packet BPF filter supports MOD and XOR, from Eric Dumazet and Daniel
    Borkmann.

 8) Increate the loopback default MTU to 64K, from Eric Dumazet.

 9) Use a per-task rather than per-socket page fragment allocator for
    outgoing networking traffic.  This benefits processes that have very
    many mostly idle sockets, which is quite common.

    From Eric Dumazet.

10) Use up to 32K for page fragment allocations, with fallbacks to
    smaller sizes when higher order page allocations fail.  Benefits are
    a) less segments for driver to process b) less calls to page
    allocator c) less waste of space.

    From Eric Dumazet.

11) Allow GRO to be used on GRE tunnels, from Eric Dumazet.

12) VXLAN device driver, one way to handle VLAN issues such as the
    limitation of 4096 VLAN IDs yet still have some level of isolation.
    From Stephen Hemminger.

13) As usual there is a large boatload of driver changes, with the scale
    perhaps tilted towards the wireless side this time around.

Fix up various fairly trivial conflicts, mostly caused by the user
namespace changes.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1012 commits)
  hyperv: Add buffer for extended info after the RNDIS response message.
  hyperv: Report actual status in receive completion packet
  hyperv: Remove extra allocated space for recv_pkt_list elements
  hyperv: Fix page buffer handling in rndis_filter_send_request()
  hyperv: Fix the missing return value in rndis_filter_set_packet_filter()
  hyperv: Fix the max_xfer_size in RNDIS initialization
  vxlan: put UDP socket in correct namespace
  vxlan: Depend on CONFIG_INET
  sfc: Fix the reported priorities of different filter types
  sfc: Remove EFX_FILTER_FLAG_RX_OVERRIDE_IP
  sfc: Fix loopback self-test with separate_tx_channels=1
  sfc: Fix MCDI structure field lookup
  sfc: Add parentheses around use of bitfield macro arguments
  sfc: Fix null function pointer in efx_sriov_channel_type
  vxlan: virtual extensible lan
  igmp: export symbol ip_mc_leave_group
  netlink: add attributes to fdb interface
  tg3: unconditionally select HWMON support when tg3 is enabled.
  Revert "net: ti cpsw ethernet: allow reading phy interface mode from DT"
  gre: fix sparse warning
  ...
2012-10-02 13:38:27 -07:00
Eric W. Biederman cca080d9b6 userns: Convert audit to work with user namespaces enabled
- Explicitly format uids gids in audit messges in the initial user
  namespace. This is safe because auditd is restrected to be in
  the initial user namespace.

- Convert audit_sig_uid into a kuid_t.

- Enable building the audit code and user namespaces at the same time.

The net result is that the audit subsystem now uses kuid_t and kgid_t whenever
possible making it almost impossible to confuse a raw uid_t with a kuid_t
preventing bugs.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-18 01:00:26 -07:00
Eric W. Biederman e1760bd5ff userns: Convert the audit loginuid to be a kuid
Always store audit loginuids in type kuid_t.

Print loginuids by converting them into uids in the appropriate user
namespace, and then printing the resulting uid.

Modify audit_get_loginuid to return a kuid_t.

Modify audit_set_loginuid to take a kuid_t.

Modify /proc/<pid>/loginuid on read to convert the loginuid into the
user namespace of the opener of the file.

Modify /proc/<pid>/loginud on write to convert the loginuid
rom the user namespace of the opener of the file.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: Paul Moore <paul@paul-moore.com> ?
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-17 18:08:54 -07:00
Eric W. Biederman 860c0aaff7 audit: Don't pass pid or uid to audit_log_common_recv_msg
The only place we use the uid and the pid that we calculate in
audit_receive_msg is in audit_log_common_recv_msg so move the
calculation of these values into the audit_log_common_recv_msg.

Simplify the calcuation of the current pid and uid by
reading them from current instead of reading them from
NETLINK_CREDS.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-09-17 18:07:40 -07:00
Eric W. Biederman 017143fecb audit: Remove the unused uid parameter from audit_receive_filter
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-09-17 18:07:07 -07:00
Eric W. Biederman 35ce9888ad audit: Properly set the origin port id of audit messages.
For user generated audit messages set the portid field in the netlink
header to the netlink port where the user generated audit message came
from.  Reporting the process id in a port id field was just nonsense.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-09-17 18:06:14 -07:00
Eric W. Biederman 8aa14b6498 audit: Simply AUDIT_TTY_SET and AUDIT_TTY_GET
Use current instead of looking up the current up the current task by
process identifier.  Netlink requests are processed in trhe context of
the sending task so this is safe.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-09-17 18:04:33 -07:00
Eric W. Biederman f95732e2e0 audit: kill audit_prepare_user_tty
Now that netlink messages are processed in the context of the sender
tty_audit_push_task can be called directly and audit_prepare_user_tty
which only added looking up the task of the tty by process id is
not needed.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-09-17 18:03:59 -07:00
Eric W. Biederman 02276bda4a audit: Use current instead of NETLINK_CREDS() in audit_filter
Get caller process uid and gid and pid values from the current task
instead of the NETLINK_CB.  This is simpler than passing NETLINK_CREDS
from from audit_receive_msg to audit_filter_user_rules and avoid the
chance of being hit by the occassional bugs in netlink uid/gid
credential passing.  This is a safe changes because all netlink
requests are processed in the task of the sending process.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-09-17 18:03:31 -07:00
Eric W. Biederman 34e36d8ecb audit: Limit audit requests to processes in the initial pid and user namespaces.
This allows the code to safely make the assumption that all of the
uids gids and pids that need to be send in audit messages are in the
initial namespaces.

If someone cares we may lift this restriction someday but start with
limiting access so at least the code is always correct.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-09-17 17:38:42 -07:00
Eric W. Biederman 15e473046c netlink: Rename pid to portid to avoid confusion
It is a frequent mistake to confuse the netlink port identifier with a
process identifier.  Try to reduce this confusion by renaming fields
that hold port identifiers portid instead of pid.

I have carefully avoided changing the structures exported to
userspace to avoid changing the userspace API.

I have successfully built an allyesconfig kernel with this change.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-10 15:30:41 -04:00
Pablo Neira Ayuso 9f00d9776b netlink: hide struct module parameter in netlink_kernel_create
This patch defines netlink_kernel_create as a wrapper function of
__netlink_kernel_create to hide the struct module *me parameter
(which seems to be THIS_MODULE in all existing netlink subsystems).

Suggested by David S. Miller.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-08 18:46:30 -04:00
Linus Torvalds a0e881b7c1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull second vfs pile from Al Viro:
 "The stuff in there: fsfreeze deadlock fixes by Jan (essentially, the
  deadlock reproduced by xfstests 068), symlink and hardlink restriction
  patches, plus assorted cleanups and fixes.

  Note that another fsfreeze deadlock (emergency thaw one) is *not*
  dealt with - the series by Fernando conflicts a lot with Jan's, breaks
  userland ABI (FIFREEZE semantics gets changed) and trades the deadlock
  for massive vfsmount leak; this is going to be handled next cycle.
  There probably will be another pull request, but that stuff won't be
  in it."

Fix up trivial conflicts due to unrelated changes next to each other in
drivers/{staging/gdm72xx/usb_boot.c, usb/gadget/storage_common.c}

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits)
  delousing target_core_file a bit
  Documentation: Correct s_umount state for freeze_fs/unfreeze_fs
  fs: Remove old freezing mechanism
  ext2: Implement freezing
  btrfs: Convert to new freezing mechanism
  nilfs2: Convert to new freezing mechanism
  ntfs: Convert to new freezing mechanism
  fuse: Convert to new freezing mechanism
  gfs2: Convert to new freezing mechanism
  ocfs2: Convert to new freezing mechanism
  xfs: Convert to new freezing code
  ext4: Convert to new freezing mechanism
  fs: Protect write paths by sb_start_write - sb_end_write
  fs: Skip atime update on frozen filesystem
  fs: Add freezing handling to mnt_want_write() / mnt_drop_write()
  fs: Improve filesystem freezing handling
  switch the protection of percpu_counter list to spinlock
  nfsd: Push mnt_want_write() outside of i_mutex
  btrfs: Push mnt_want_write() outside of i_mutex
  fat: Push mnt_want_write() outside of i_mutex
  ...
2012-08-01 10:26:23 -07:00
Kees Cook a51d9eaa41 fs: add link restriction audit reporting
Adds audit messages for unexpected link restriction violations so that
system owners will have some sort of potentially actionable information
about misbehaving processes.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-29 21:43:08 +04:00
Pablo Neira Ayuso a31f2d17b3 netlink: add netlink_kernel_cfg parameter to netlink_kernel_create
This patch adds the following structure:

struct netlink_kernel_cfg {
        unsigned int    groups;
        void            (*input)(struct sk_buff *skb);
        struct mutex    *cb_mutex;
};

That can be passed to netlink_kernel_create to set optional configurations
for netlink kernel sockets.

I've populated this structure by looking for NULL and zero parameters at the
existing code. The remaining parameters that always need to be set are still
left in the original interface.

That includes optional parameters for the netlink socket creation. This allows
easy extensibility of this interface in the future.

This patch also adapts all callers to use this new interface.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-29 16:46:02 -07:00
David S. Miller c64e66c67b audit: netlink: Move away from NLMSG_NEW().
And use nlmsg_data() while we're here too.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-26 21:54:14 -07:00
Al Viro 66b3fad3f4 constify path argument of audit_log_d_path()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-20 21:29:40 -04:00
Linus Torvalds f429ee3b80 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit: (29 commits)
  audit: no leading space in audit_log_d_path prefix
  audit: treat s_id as an untrusted string
  audit: fix signedness bug in audit_log_execve_info()
  audit: comparison on interprocess fields
  audit: implement all object interfield comparisons
  audit: allow interfield comparison between gid and ogid
  audit: complex interfield comparison helper
  audit: allow interfield comparison in audit rules
  Kernel: Audit Support For The ARM Platform
  audit: do not call audit_getname on error
  audit: only allow tasks to set their loginuid if it is -1
  audit: remove task argument to audit_set_loginuid
  audit: allow audit matching on inode gid
  audit: allow matching on obj_uid
  audit: remove audit_finish_fork as it can't be called
  audit: reject entry,always rules
  audit: inline audit_free to simplify the look of generic code
  audit: drop audit_set_macxattr as it doesn't do anything
  audit: inline checks for not needing to collect aux records
  audit: drop some potentially inadvisable likely notations
  ...

Use evil merge to fix up grammar mistakes in Kconfig file.

Bad speling and horrible grammar (and copious swearing) is to be
expected, but let's keep it to commit messages and comments, rather than
expose it to users in config help texts or printouts.
2012-01-17 16:41:31 -08:00
Kees Cook c158a35c8a audit: no leading space in audit_log_d_path prefix
audit_log_d_path() injects an additional space before the prefix,
which serves no purpose and doesn't mix well with other audit_log*()
functions that do not sneak extra characters into the log.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-17 16:17:04 -05:00
Eric Paris 3035c51e8a audit: drop the meaningless and format breaking word 'user'
userspace audit messages look like so:

type=USER msg=audit(1271170549.415:24710): user pid=14722 uid=0 auid=500 ses=1 subj=unconfined_u:unconfined_r:auditctl_t:s0-s0:c0.c1023 msg=''

That third field just says 'user'.  That's useless and doesn't follow the
key=value pair we are trying to enforce.  We already know it came from the
user based on the record type.  Kill that word.  Die.

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-17 16:16:54 -05:00
Linus Torvalds c49c41a413 Merge branch 'for-linus' of git://selinuxproject.org/~jmorris/linux-security
* 'for-linus' of git://selinuxproject.org/~jmorris/linux-security:
  capabilities: remove __cap_full_set definition
  security: remove the security_netlink_recv hook as it is equivalent to capable()
  ptrace: do not audit capability check when outputing /proc/pid/stat
  capabilities: remove task_ns_* functions
  capabitlies: ns_capable can use the cap helpers rather than lsm call
  capabilities: style only - move capable below ns_capable
  capabilites: introduce new has_ns_capabilities_noaudit
  capabilities: call has_ns_capability from has_capability
  capabilities: remove all _real_ interfaces
  capabilities: introduce security_capable_noaudit
  capabilities: reverse arguments to security_capable
  capabilities: remove the task from capable LSM hook entirely
  selinux: sparse fix: fix several warnings in the security server cod
  selinux: sparse fix: fix warnings in netlink code
  selinux: sparse fix: eliminate warnings for selinuxfs
  selinux: sparse fix: declare selinux_disable() in security.h
  selinux: sparse fix: move selinux_complete_init
  selinux: sparse fix: make selinux_secmark_refcount static
  SELinux: Fix RCU deref check warning in sel_netport_insert()

Manually fix up a semantic mis-merge wrt security_netlink_recv():

 - the interface was removed in commit fd77846152 ("security: remove
   the security_netlink_recv hook as it is equivalent to capable()")

 - a new user of it appeared in commit a38f7907b9 ("crypto: Add
   userspace configuration API")

causing no automatic merge conflict, but Eric Paris pointed out the
issue.
2012-01-14 18:36:33 -08:00
Jesper Juhl a0e86bd425 audit: always follow va_copy() with va_end()
A call to va_copy() should always be followed by a call to va_end() in
the same function.  In kernel/autit.c::audit_log_vformat() this is not
always done.  This patch makes sure va_end() is always called.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-08 14:15:21 -08:00
Eric Paris fd77846152 security: remove the security_netlink_recv hook as it is equivalent to capable()
Once upon a time netlink was not sync and we had to get the effective
capabilities from the skb that was being received.  Today we instead get
the capabilities from the current task.  This has rendered the entire
purpose of the hook moot as it is now functionally equivalent to the
capable() call.

Signed-off-by: Eric Paris <eparis@redhat.com>
2012-01-05 18:53:01 -05:00
Paul Gortmaker 9984de1a5a kernel: Map most files to use export.h instead of module.h
The changed files were only including linux/module.h for the
EXPORT_SYMBOL infrastructure, and nothing else.  Revector them
onto the isolated export header for faster compile times.

Nothing to see here but a whole lot of instances of:

  -#include <linux/module.h>
  +#include <linux/export.h>

This commit is only changing the kernel dir; next targets
will probably be mm, fs, the arch dirs, etc.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 09:20:12 -04:00
Arun Sharma 60063497a9 atomic: use <linux/atomic.h>
This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>

Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:47 -07:00
Mr Dash Four 131ad62d8f netfilter: add SELinux context support to AUDIT target
In this revision the conversion of secid to SELinux context and adding it
to the audit log is moved from xt_AUDIT.c to audit.c with the aid of a
separate helper function - audit_log_secctx - which does both the conversion
and logging of SELinux context, thus also preventing internal secid number
being leaked to userspace. If conversion is not successful an error is raised.

With the introduction of this helper function the work done in xt_AUDIT.c is
much more simplified. It also opens the possibility of this helper function
being used by other modules (including auditd itself), if desired. With this
addition, typical (raw auditd) output after applying the patch would be:

type=NETFILTER_PKT msg=audit(1305852240.082:31012): action=0 hook=1 len=52 inif=? outif=eth0 saddr=10.1.1.7 daddr=10.1.2.1 ipid=16312 proto=6 sport=56150 dport=22 obj=system_u:object_r:ssh_client_packet_t:s0
type=NETFILTER_PKT msg=audit(1306772064.079:56): action=0 hook=3 len=48 inif=eth0 outif=? smac=00:05:5d:7c:27:0b dmac=00:02:b3:0a:7f:81 macproto=0x0800 saddr=10.1.2.1 daddr=10.1.1.7 ipid=462 proto=6 sport=22 dport=3561 obj=system_u:object_r:ssh_server_packet_t:s0

Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Mr Dash Four <mr.dash.four@googlemail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2011-06-30 13:31:57 +02:00
Patrick McHardy c53fa1ed92 netlink: kill loginuid/sessionid/sid members from struct netlink_skb_parms
Netlink message processing in the kernel is synchronous these days, the
session information can be collected when needed.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-03 10:55:40 -08:00
Patrick McHardy 14f0290ba4 Merge branch 'master' of /repos/git/net-next-2.6 2011-01-19 23:51:37 +01:00
Jan Engelhardt ae9d67aff6 audit: export symbol for use with xt_AUDIT
When xt_AUDIT is built as a module, modpost reports a problem.

	MODPOST 322 modules
	ERROR: "audit_enabled" [net/netfilter/x_tables.ko] undefined!
	WARNING: modpost: Found 1 section mismatch(es).

Cc: Thomas Graf <tgraf@redhat.com>
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
2011-01-18 06:48:29 +01:00
Ross Kirk 9db3b9bcc7 audit: error message typo correction
Fixes a typo in the error message raised by audit when auditd has died.

Signed-off-by: Ross Kirk <ross.kirk@nexor.com>

--
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-03 13:49:58 -04:00
Thomas Gleixner ab263f47c9 audit: Use rcu for task lookup protection
Protect the task lookups in audit_receive_msg() with rcu_read_lock()
instead of tasklist_lock and use lock/unlock_sighand to protect
against the exit race.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-30 08:45:42 -04:00
Thomas Gleixner 207032051a audit: Do not send uninitialized data for AUDIT_TTY_GET
audit_receive_msg() sends uninitialized data for AUDIT_TTY_GET when
the task was not found.

Send reply only when task was found.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-30 08:45:42 -04:00
Thomas Gleixner 3c80fe4ac9 audit: Call tty_audit_push_task() outside preempt disabled
While auditing all tasklist_lock read_lock sites I stumbled over the
following call chain:

audit_prepare_user_tty()
  read_lock(&tasklist_lock);
  tty_audit_push_task();
     mutex_lock(&buf->mutex);

     --> buf->mutex is locked with preemption disabled.

Solve this by acquiring a reference to the task struct under
rcu_read_lock and call tty_audit_push_task outside of the preempt
disabled region.

Move all code which needs to be protected by sighand lock into
tty_audit_push_task() and use lock/unlock_sighand as we do not hold
tasklist_lock.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-30 08:45:25 -04:00
Stephen Hemminger b8800aa5d9 audit: make functions static
I was doing some namespace checks and found some simple stuff in
audit that could be cleaned up. Make some functions static, and
put const on make_reply payload arg.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-30 01:42:19 -04:00
Linus Torvalds 8c8946f509 Merge branch 'for-linus' of git://git.infradead.org/users/eparis/notify
* 'for-linus' of git://git.infradead.org/users/eparis/notify: (132 commits)
  fanotify: use both marks when possible
  fsnotify: pass both the vfsmount mark and inode mark
  fsnotify: walk the inode and vfsmount lists simultaneously
  fsnotify: rework ignored mark flushing
  fsnotify: remove global fsnotify groups lists
  fsnotify: remove group->mask
  fsnotify: remove the global masks
  fsnotify: cleanup should_send_event
  fanotify: use the mark in handler functions
  audit: use the mark in handler functions
  dnotify: use the mark in handler functions
  inotify: use the mark in handler functions
  fsnotify: send fsnotify_mark to groups in event handling functions
  fsnotify: Exchange list heads instead of moving elements
  fsnotify: srcu to protect read side of inode and vfsmount locks
  fsnotify: use an explicit flag to indicate fsnotify_destroy_mark has been called
  fsnotify: use _rcu functions for mark list traversal
  fsnotify: place marks on object in order of group memory address
  vfs/fsnotify: fsnotify_close can delay the final work in fput
  fsnotify: store struct file not struct path
  ...

Fix up trivial delete/modify conflict in fs/notify/inotify/inotify.c.
2010-08-10 11:39:13 -07:00
Eric Paris ae7b8f4108 Audit: clean up the audit_watch split
No real changes, just cleanup to the audit_watch split patch which we done
with minimal code changes for easy review.  Now fix interfaces to make
things work better.

Signed-off-by: Eric Paris <eparis@redhat.com>
2010-07-28 09:58:16 -04:00
Neil Horman 70d4bf6d46 drop_monitor: convert some kfree_skb call sites to consume_skb
Convert a few calls from kfree_skb to consume_skb

Noticed while I was working on dropwatch that I was detecting lots of internal
skb drops in several places.  While some are legitimate, several were not,
freeing skbs that were at the end of their life, rather than being discarded due
to an error.  This patch converts those calls sites from using kfree_skb to
consume_skb, which quiets the in-kernel drop_monitor code from detecting them as
drops.  Tested successfully by myself

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-20 13:28:05 -07:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Adam Buchbinder c9404c9c39 Fix misspelling of "should" and "shouldn't" in comments.
Some comments misspell "should" or "shouldn't"; this fixes them. No code changes.

Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-05 12:22:30 +01:00
Eric Paris 939cbf260c Audit: send signal info if selinux is disabled
Audit will not respond to signal requests if selinux is disabled since it is
unable to translate the 0 sid from the sending process to a context.  This
patch just doesn't send the context info if there isn't any.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-09-24 03:50:26 -04:00
Al Viro 916d75761c Fix rule eviction order for AUDIT_DIR
If syscall removes the root of subtree being watched, we
definitely do not want the rules refering that subtree
to be destroyed without the syscall in question having
a chance to match them.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-06-24 00:02:38 -04:00
Eric Paris 9d96098510 Audit: clean up all op= output to include string quoting
A number of places in the audit system we send an op= followed by a string
that includes spaces.  Somehow this works but it's just wrong.  This patch
moves all of those that I could find to be quoted.

Example:

Change From: type=CONFIG_CHANGE msg=audit(1244666690.117:31): auid=0 ses=1
subj=unconfined_u:unconfined_r:auditctl_t:s0-s0:c0.c1023 op=remove rule
key="number2" list=4 res=0

Change To: type=CONFIG_CHANGE msg=audit(1244666690.117:31): auid=0 ses=1
subj=unconfined_u:unconfined_r:auditctl_t:s0-s0:c0.c1023 op="remove rule"
key="number2" list=4 res=0

Signed-off-by: Eric Paris <eparis@redhat.com>
2009-06-24 00:00:52 -04:00
Eric Paris cfcad62c74 audit: seperate audit inode watches into a subfile
In preparation for converting audit to use fsnotify instead of inotify we
seperate the inode watching code into it's own file.  This is similar to
how the audit tree watching code is already seperated into audit_tree.c

Signed-off-by: Eric Paris <eparis@redhat.com>
2009-06-23 23:50:59 -04:00
Eric Paris ea7ae60bfe Audit: clean up audit_receive_skb
audit_receive_skb is hard to clearly parse what it is doing to the netlink
message.  Clean the function up so it is easy and clear to see what is going
on.

Signed-off-by: Eric Paris <eparis@redhat.com>
2009-06-23 23:50:40 -04:00
Eric Paris ee080e6ce9 Audit: cleanup netlink mesg handling
The audit handling of netlink messages is all over the place.  Clean things
up, use predetermined macros, generally make it more readable.

Signed-off-by: Eric Paris <eparis@redhat.com>
2009-06-23 23:50:39 -04:00
Eric Paris 038cbcf65f Audit: unify the printk of an skb when auditd not around
Remove code duplication of skb printk when auditd is not around in userspace
to deal with this message.

Signed-off-by: Eric Paris <eparis@redhat.com>
2009-06-23 23:50:37 -04:00
Eric Paris def5754341 Audit: remove spaces from audit_log_d_path
audit_log_d_path had spaces in the strings which would be emitted on the
error paths.  This patch simply replaces those spaces with an _ or removes
the needless spaces entirely.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-04-05 13:49:04 -04:00
Miloslav Trmac 55ad2f8d34 audit: ignore terminating NUL in AUDIT_USER_TTY messages
AUDIT_USER_TTY, like all other messages sent from user-space, is sent
NUL-terminated.  Unlike other user-space audit messages, which come only
from trusted sources, AUDIT_USER_TTY messages are processed using
audit_log_n_untrustedstring().

This patch modifies AUDIT_USER_TTY handling to ignore the trailing NUL
and use the "quoted_string" representation of the message if possible.

Signed-off-by: Miloslav Trmac <mitr@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-04-05 13:43:36 -04:00
Miloslav Trmac b3897f5671 Audit: fix handling of 'strings' with NULL characters
currently audit_log_n_untrustedstring() uses audit_string_contains_control()
to check if the 'string' has any control characters.  If the 'string' has an
embedded NULL audit_string_contains_control() will return that the data has
no control characters and will then pass the string to audit_log_n_string
with the total length, not the length up to the first NULL.
audit_log_n_string() does a memcpy of the entire length and so the actual
audit record emitted may then contain a NULL and then whatever random memory
is after the NULL.

Since we want to log the entire octet stream (if we can't trust the data
to be a string we can't trust that a NULL isn't actually a part of it)
we should just consider NULL as a control character.  If the caller is
certain they want to stop at the first NULL they should be using
audit_log_untrustedstring.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-04-05 13:43:24 -04:00
Al Viro 48887e63d6 [PATCH] fix broken timestamps in AVC generated by kernel threads
Timestamp in audit_context is valid only if ->in_syscall is set.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-12-09 02:27:41 -05:00
Eric Paris a3f07114e3 [PATCH] Audit: make audit=0 actually turn off audit
Currently audit=0 on the kernel command line does absolutely nothing.
Audit always loads and always uses its resources such as creating the
kernel netlink socket.  This patch causes audit=0 to actually disable
audit.  Audit will use no resources and starting the userspace auditd
daemon will not cause the kernel audit system to activate.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-12-09 02:27:37 -05:00
zhangxiliang 20c6aaa39a [PATCH] Fix the bug of using AUDIT_STATUS_RATE_LIMIT when set fail, no error output.
When the "status_get->mask" is "AUDIT_STATUS_RATE_LIMIT || AUDIT_STATUS_BACKLOG_LIMIT".
If "audit_set_rate_limit" fails and "audit_set_backlog_limit" succeeds, the "err" value
will be greater than or equal to 0. It will miss the failure of rate set.

Signed-off-by: Zhang Xiliang <zhangxiliang@cn.fujitsu.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-08-01 12:15:16 -04:00
Vesa-Matti J Kari 1d6c9649e2 kernel/audit.c control character detection is off-by-one
Hello,

According to my understanding there is an off-by-one bug in the
function:

   audit_string_contains_control()

in:

  kernel/audit.c

Patch is included.

I do not know from how many places the function is called from, but for
example, SELinux Access Vector Cache tries to log untrusted filenames via
call path:

avc_audit()
     audit_log_untrustedstring()
         audit_log_n_untrustedstring()
             audit_string_contains_control()

If audit_string_contains_control() detects control characters, then the
string is hex-encoded. But the hex=0x7f dec=127, DEL-character, is not
detected.

I guess this could have at least some minor security implications, since a
user can create a filename with 0x7f in it, causing logged filename to
possibly look different when someone reads it on the terminal.

Signed-off-by: Vesa-Matti Kari <vmkari@cc.helsinki.fi>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-08-01 12:05:35 -04:00
Peng Haitao d8de72473e [PATCH] remove useless argument type in audit_filter_user()
The second argument "type" is not used in audit_filter_user(), so I think that type can be removed. If I'm wrong, please tell me.

Signed-off-by: Peng Haitao <penght@cn.fujitsu.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-06-24 23:36:35 -04:00
Peng Haitao 13d5ef97f0 [PATCH] kernel/audit.c: nlh->nlmsg_type is gotten more than once
The first argument "nlh->nlmsg_type" of audit_receive_filter() should be modified to "msg_type" in audit_receive_msg().

Signed-off-by: Peng Haitao <penght@cn.fujitsu.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-06-24 23:36:21 -04:00
Andrew Morton fcaf1eb868 [patch 1/1] audit_send_reply(): fix error-path memory leak
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=10663

Reporter: Daniel Marjamki <danielm77@spray.se>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-05-17 03:30:22 -04:00
Pavel Emelyanov 4a761b8c1d [patch 2/2] Use find_task_by_vpid in audit code
The pid to lookup a task by is passed inside audit code via netlink message.

Thanks to Denis Lunev, netlink packets are now (since 2.6.24) _always_
processed in the context of the sending task.  So this is correct to lookup
the task with find_task_by_vpid() here.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-28 06:28:30 -04:00
Harvey Harrison 7719e437fa [PATCH 2/2] audit: fix sparse shadowed variable warnings
Use msglen as the identifier.
kernel/audit.c:724:10: warning: symbol 'len' shadows an earlier one
kernel/audit.c:575:8: originally declared here

Don't use ino_f to check the inode field at the end of the functions.
kernel/auditfilter.c:429:22: warning: symbol 'f' shadows an earlier one
kernel/auditfilter.c:420:21: originally declared here
kernel/auditfilter.c:542:22: warning: symbol 'f' shadows an earlier one
kernel/auditfilter.c:529:21: originally declared here

i always used as a counter for a for loop and initialized to zero before
use.  Eliminate the inner i variables.
kernel/auditsc.c:1295:8: warning: symbol 'i' shadows an earlier one
kernel/auditsc.c:1152:6: originally declared here
kernel/auditsc.c:1320:7: warning: symbol 'i' shadows an earlier one
kernel/auditsc.c:1152:6: originally declared here

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-28 06:28:17 -04:00
Eric Paris b556f8ad58 Audit: standardize string audit interfaces
This patch standardized the string auditing interfaces.  No userspace
changes will be visible and this is all just cleanup and consistancy
work.  We have the following string audit interfaces to use:

void audit_log_n_hex(struct audit_buffer *ab, const unsigned char *buf, size_t len);

void audit_log_n_string(struct audit_buffer *ab, const char *buf, size_t n);
void audit_log_string(struct audit_buffer *ab, const char *buf);

void audit_log_n_untrustedstring(struct audit_buffer *ab, const char *string, size_t n);
void audit_log_untrustedstring(struct audit_buffer *ab, const char *string);

This may be the first step to possibly fixing some of the issues that
people have with the string output from the kernel audit system.  But we
still don't have an agreed upon solution to that problem.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-28 06:19:22 -04:00
Eric Paris f09ac9db2a Audit: stop deadlock from signals under load
A deadlock is possible between kauditd and auditd under load if auditd
receives a signal.  When auditd receives a signal it sends a netlink
message to the kernel asking for information about the sender of the
signal.  In that same context the audit system will attempt to send a
netlink message back to the userspace auditd.  If kauditd has already
filled the socket buffer (see netlink_attachskb()) auditd will now put
itself to sleep waiting for room to send the message.  Since auditd is
responsible for draining that socket we have a deadlock.  The fix, since
the response from the kernel does not need to be synchronous is to send
the signal information back to auditd in a separate thread.  And thus
auditd can continue to drain the audit queue normally.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-28 06:19:13 -04:00
Eric Paris f3d357b092 Audit: save audit_backlog_limit audit messages in case auditd comes back
This patch causes the kernel audit subsystem to store up to
audit_backlog_limit messages for use by auditd if it ever appears
sometime in the future in userspace.  This is useful to collect audit
messages during bootup and even when auditd is stopped.  This is NOT a
reliable mechanism, it does not ever call audit_panic, nor should it.
audit_log_lost()/audit_panic() are called during the normal delivery
mechanism.  The messages are still sent to printk/syslog as usual and if
too many messages appear to be queued they will be silently discarded.

I liked doing it by default, but this patch only uses the queue in
question if it was booted with audit=1 or if the kernel was built
enabling audit by default.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-28 06:19:04 -04:00
Eric Paris 2532386f48 Audit: collect sessionid in netlink messages
Previously I added sessionid output to all audit messages where it was
available but we still didn't know the sessionid of the sender of
netlink messages.  This patch adds that information to netlink messages
so we can audit who sent netlink messages.

Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-04-28 06:18:03 -04:00
Ahmed S. Darwish d7a96f3a1a Audit: internally use the new LSM audit hooks
Convert Audit to use the new LSM Audit hooks instead of
the exported SELinux interface.

Basically, use:
security_audit_rule_init
secuirty_audit_rule_free
security_audit_rule_known
security_audit_rule_match

instad of (respectively) :
selinux_audit_rule_init
selinux_audit_rule_free
audit_rule_has_selinux
selinux_audit_rule_match

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Acked-by: James Morris <jmorris@namei.org>
2008-04-19 09:52:37 +10:00
Ahmed S. Darwish 2a862b32f3 Audit: use new LSM hooks instead of SELinux exports
Stop using the following exported SELinux interfaces:
selinux_get_inode_sid(inode, sid)
selinux_get_ipc_sid(ipcp, sid)
selinux_get_task_sid(tsk, sid)
selinux_sid_to_string(sid, ctx, len)
kfree(ctx)

and use following generic LSM equivalents respectively:
security_inode_getsecid(inode, secid)
security_ipc_getsecid*(ipcp, secid)
security_task_getsecid(tsk, secid)
security_sid_to_secctx(sid, ctx, len)
security_release_secctx(ctx, len)

Call security_release_secctx only if security_secid_to_secctx
succeeded.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Acked-by: James Morris <jmorris@namei.org>
Reviewed-by: Paul Moore <paul.moore@hp.com>
2008-04-19 09:52:34 +10:00
Dave Jones f706d5d22c audit: silence two kerneldoc warnings in kernel/audit.c
Silence two kerneldoc warnings.

Warning(kernel/audit.c:1276): No description found for parameter 'string'
Warning(kernel/audit.c:1276): No description found for parameter 'len'

[also fix a typo for bonus points]

Signed-off-by: Dave Jones <davej@codemonkey.org.uk>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-28 14:45:21 -07:00
Pavel Emelyanov 75c0371a2d audit: netlink socket can be auto-bound to pid other than current->pid (v2)
From:	Pavel Emelyanov <xemul@openvz.org>

This patch is based on the one from Thomas.

The kauditd_thread() calls the netlink_unicast() and passes 
the audit_pid to it. The audit_pid, in turn, is received from 
the user space and the tool (I've checked the audit v1.6.9) 
uses getpid() to pass one in the kernel. Besides, this tool 
doesn't bind the netlink socket to this id, but simply creates 
it allowing the kernel to auto-bind one.

That's the preamble.

The problem is that netlink_autobind() _does_not_ guarantees
that the socket will be auto-bound to the current pid. Instead
it uses the current pid as a hint to start looking for a free
id. So, in case of conflict, the audit messages can be sent
to a wrong socket. This can happen (it's unlikely, but can be)
in case some task opens more than one netlink sockets and then
the audit one starts - in this case the audit's pid can be busy
and its socket will be bound to another id.

The proposal is to introduce an audit_nlk_pid in audit subsys,
that will point to the netlink socket to send packets to. It
will most often be equal to audit_pid. The socket id can be 
got from the skb's netlink CB right in the audit_receive_msg.
The audit_nlk_pid reset to 0 is not required, since all the
decisions are taken based on audit_pid value only.

Later, if the audit tools will bind the socket themselves, the
kernel will have to provide a way to setup the audit_nlk_pid
as well.

A good side effect of this patch is that audit_pid can later 
be converted to struct pid, as it is not longer safe to use 
pid_t-s in the presence of pid namespaces. But audit code still 
uses the tgid from task_struct in the audit_signal_info and in
the audit_filter_syscall.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-20 15:39:41 -07:00
Steve Grubb 8d07a67cfa [PATCH] drop EOE records from printk
Hi,

While we are looking at the printk issue, I see that its printk'ing the EOE
(end of event) records which is really not something that we need in syslog.
Its really intended for the realtime audit event stream handled by the audit
daemon. So, lets avoid printk'ing that record type.

Signed-off-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-03-01 07:16:06 -05:00
Eric Paris b29ee87e9b [RFC] AUDIT: do not panic when printk loses messages
On the latest kernels if one was to load about 15 rules, set the failure
state to panic, and then run service auditd stop the kernel will panic.
This is because auditd stops, then the script deletes all of the rules.
These deletions are sent as audit messages out of the printk kernel
interface which is already known to be lossy.  These will overun the
default kernel rate limiting (10 really fast messages) and will call
audit_panic().  The same effect can happen if a slew of avc's come
through while auditd is stopped.

This can be fixed a number of ways but this patch fixes the problem by
just not panicing if auditd is not running.  We know printk is lossy and
if the user chooses to set the failure mode to panic and tries to use
printk we can't make any promises no matter how hard we try, so why try?
At least in this way we continue to get lost message accounting and will
eventually know that things went bad.

The other change is to add a new call to audit_log_lost() if auditd
disappears.  We already pulled the skb off the queue and couldn't send
it so that message is lost.  At least this way we will account for the
last message and panic if the machine is configured to panic.  This code
path should only be run if auditd dies for unforeseen reasons.  If
auditd closes correctly audit_pid will get set to 0 and we won't walk
this code path.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-03-01 07:16:06 -05:00
Jan Blunck cf28b4863f d_path: Make d_path() use a struct path
d_path() is used on a <dentry,vfsmount> pair.  Lets use a struct path to
reflect this.

[akpm@linux-foundation.org: fix build in mm/memory.c]
Signed-off-by: Jan Blunck <jblunck@suse.de>
Acked-by: Bryan Wu <bryan.wu@analog.com>
Acked-by: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-14 21:17:09 -08:00
Jan Blunck 44707fdf59 d_path: Use struct path in struct avc_audit_data
audit_log_d_path() is a d_path() wrapper that is used by the audit code.  To
use a struct path in audit_log_d_path() I need to embed it into struct
avc_audit_data.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Jan Blunck <jblunck@suse.de>
Acked-by: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Stephen Smalley <sds@tycho.nsa.gov>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-14 21:17:08 -08:00
Eric Paris 320f1b1ed2 [AUDIT] ratelimit printk messages audit
some printk messages from the audit system can become excessive.  This
patch ratelimits those messages.  It was found that messages, such as
the audit backlog lost printk message could flood the logs to the point
that a machine could take an nmi watchdog hit or otherwise become
unresponsive.

Signed-off-by: Eric Paris <eparis@redhat.com>
2008-02-01 14:25:04 -05:00
Richard Knutsson 148b38dc93 [patch 2/2] audit: complement va_copy with va_end()
Complement va_copy() with va_end().

Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-02-01 14:24:57 -05:00
Andrew Morton ef00be0554 [patch 1/2] kernel/audit.c: warning fix
kernel/audit.c: In function 'audit_log_start':
kernel/audit.c:1133: warning: 'serial' may be used uninitialized in this function

Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-02-01 14:24:51 -05:00
Eric Paris b593d384ef [AUDIT] create context if auditing was ever enabled
Disabling audit at runtime by auditctl doesn't mean that we can
stop allocating contexts for new processes; we don't want to miss them
when that sucker is reenabled.

(based on work from Al Viro in the RHEL kernel series)

Signed-off-by: Eric Paris <eparis@redhat.com>
2008-02-01 14:24:45 -05:00
Eric Paris 50397bd1e4 [AUDIT] clean up audit_receive_msg()
generally clean up audit_receive_msg() don't free random memory if
selinux_sid_to_string fails for some reason.  Move generic auditing
to a helper function

Signed-off-by: Eric Paris <eparis@redhat.com>
2008-02-01 14:24:39 -05:00
Eric Paris 1a6b9f2317 [AUDIT] make audit=0 really stop audit messages
Some audit messages (namely configuration changes) are still emitted even if
the audit subsystem has been explicitly disabled.  This patch turns those
messages off as well.

Signed-off-by: Eric Paris <eparis@redhat.com>
2008-02-01 14:24:33 -05:00
Eric Paris de6bbd1d30 [AUDIT] break large execve argument logging into smaller messages
execve arguments can be quite large.  There is no limit on the number of
arguments and a 4G limit on the size of an argument.

this patch prints those aruguments in bite sized pieces.  a userspace size
limitation of 8k was discovered so this keeps messages around 7.5k

single arguments larger than 7.5k in length are split into multiple records
and can be identified as aX[Y]=

Signed-off-by: Eric Paris <eparis@redhat.com>
2008-02-01 14:23:55 -05:00
Eric Paris e445deb593 [AUDIT] include audit type in audit message when using printk
Currently audit drops the audit type when an audit message goes through
printk instead of the audit deamon.  This is a minor annoyance in
that the audit type is no longer part of the message and the information
the audit type conveys needs to be carried in, or derived from the
message data.

The attached patch includes the type number as part of the printk.
Admittedly it isn't the type name that the audit deamon provides but I
think this is better than dropping the type completely.

Signed-pff-by: John Johansen <jjohansen@suse.de>
Signed-off-by: Eric Paris <eparis@redhat.com>
2008-02-01 14:08:14 -05:00
Herbert Xu 406a1d8680 [AUDIT]: Increase skb->truesize in audit_expand
The recent UDP patch exposed this bug in the audit code.  It
was calling pskb_expand_head without increasing skb->truesize.
The caller of pskb_expand_head needs to do so because that function
is designed to be called in places where truesize is already fixed
and therefore it doesn't update its value.

Because the audit system is using it in a place where the truesize
has not yet been fixed, it needs to update its value manually.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-31 19:27:08 -08:00
Al Viro 74c3cbe33b [PATCH] audit: watching subtrees
New kind of audit rule predicates: "object is visible in given subtree".
The part that can be sanely implemented, that is.  Limitations:
	* if you have hardlink from outside of tree, you'd better watch
it too (or just watch the object itself, obviously)
	* if you mount something under a watched tree, tell audit
that new chunk should be added to watched subtrees
	* if you umount something in a watched tree and it's still mounted
elsewhere, you will get matches on events happening there.  New command
tells audit to recalculate the trees, trimming such sources of false
positives.

Note that it's _not_ about path - if something mounted in several places
(multiple mount, bindings, different namespaces, etc.), the match does
_not_ depend on which one we are using for access.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2007-10-21 02:37:45 -04:00
Daniel Walker 5600b89278 whitespace fixes: system auditing
Just removing white space at the end of lines.

Signed-off-by: Daniel Walker <dwalker@mvista.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:25 -07:00
Denis V. Lunev cd40b7d398 [NET]: make netlink user -> kernel interface synchronious
This patch make processing netlink user -> kernel messages synchronious.
This change was inspired by the talk with Alexey Kuznetsov about current
netlink messages processing. He says that he was badly wrong when introduced 
asynchronious user -> kernel communication.

The call netlink_unicast is the only path to send message to the kernel
netlink socket. But, unfortunately, it is also used to send data to the
user.

Before this change the user message has been attached to the socket queue
and sk->sk_data_ready was called. The process has been blocked until all
pending messages were processed. The bad thing is that this processing
may occur in the arbitrary process context.

This patch changes nlk->data_ready callback to get 1 skb and force packet
processing right in the netlink_unicast.

Kernel -> user path in netlink_unicast remains untouched.

EINTR processing for in netlink_run_queue was changed. It forces rtnl_lock
drop, but the process remains in the cycle until the message will be fully
processed. So, there is no need to use this kludges now.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 21:15:29 -07:00
Eric W. Biederman b4b510290b [NET]: Support multiple network namespaces with netlink
Each netlink socket will live in exactly one network namespace,
this includes the controlling kernel sockets.

This patch updates all of the existing netlink protocols
to only support the initial network namespace.  Request
by clients in other namespaces will get -ECONREFUSED.
As they would if the kernel did not have the support for
that netlink protocol compiled in.

As each netlink protocol is updated to be multiple network
namespace safe it can register multiple kernel sockets
to acquire a presence in the rest of the network namespaces.

The implementation in af_netlink is a simple filter implementation
at hash table insertion and hash table look up time.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:49:09 -07:00
Rafael J. Wysocki 8314418629 Freezer: make kernel threads nonfreezable by default
Currently, the freezer treats all tasks as freezable, except for the kernel
threads that explicitly set the PF_NOFREEZE flag for themselves.  This
approach is problematic, since it requires every kernel thread to either
set PF_NOFREEZE explicitly, or call try_to_freeze(), even if it doesn't
care for the freezing of tasks at all.

It seems better to only require the kernel threads that want to or need to
be frozen to use some freezer-related code and to remove any
freezer-related code from the other (nonfreezable) kernel threads, which is
done in this patch.

The patch causes all kernel threads to be nonfreezable by default (ie.  to
have PF_NOFREEZE set by default) and introduces the set_freezable()
function that should be called by the freezable kernel threads in order to
unset PF_NOFREEZE.  It also makes all of the currently freezable kernel
threads call set_freezable(), so it shouldn't cause any (intentional)
change of behaviour to appear.  Additionally, it updates documentation to
describe the freezing of tasks more accurately.

[akpm@linux-foundation.org: build fixes]
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Nigel Cunningham <nigel@nigel.suspend2.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:02 -07:00
Miloslav Trmac 522ed7767e Audit: add TTY input auditing
Add TTY input auditing, used to audit system administrator's actions.  This is
required by various security standards such as DCID 6/3 and PCI to provide
non-repudiation of administrator's actions and to allow a review of past
actions if the administrator seems to overstep their duties or if the system
becomes misconfigured for unknown reasons.  These requirements do not make it
necessary to audit TTY output as well.

Compared to an user-space keylogger, this approach records TTY input using the
audit subsystem, correlated with other audit events, and it is completely
transparent to the user-space application (e.g.  the console ioctls still
work).

TTY input auditing works on a higher level than auditing all system calls
within the session, which would produce an overwhelming amount of mostly
useless audit events.

Add an "audit_tty" attribute, inherited across fork ().  Data read from TTYs
by process with the attribute is sent to the audit subsystem by the kernel.
The audit netlink interface is extended to allow modifying the audit_tty
attribute, and to allow sending explanatory audit events from user-space (for
example, a shell might send an event containing the final command, after the
interactive command-line editing and history expansion is performed, which
might be difficult to decipher from the TTY input alone).

Because the "audit_tty" attribute is inherited across fork (), it would be set
e.g.  for sshd restarted within an audited session.  To prevent this, the
audit_tty attribute is cleared when a process with no open TTY file
descriptors (e.g.  after daemon startup) opens a TTY.

See https://www.redhat.com/archives/linux-audit/2007-June/msg00000.html for a
more detailed rationale document for an older version of this patch.

[akpm@linux-foundation.org: build fix]
Signed-off-by: Miloslav Trmac <mitr@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Paul Fulghum <paulkf@microgate.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:47 -07:00
Robert P. J. Day 039b6b3ed8 audit: add spaces on either side of case "..." operator.
Following the programming advice laid down in the gcc manual, make
sure the case "..." operator has spaces on either side.

According to:

http://gcc.gnu.org/onlinedocs/gcc-4.1.2/gcc/Case-Ranges.html#Case-Ranges:

  "Be careful: Write spaces around the ..., for otherwise it may be
parsed wrong when you use it with integer values."

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:09 -07:00
Patrick McHardy af65bdfce9 [NETLINK]: Switch cb_lock spinlock to mutex and allow to override it
Switch cb_lock to mutex and allow netlink kernel users to override it
with a subsystem specific mutex for consistent locking in dump callbacks.
All netlink_dump_start users have been audited not to rely on any
side-effects of the previously used spinlock.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:29:03 -07:00
Arnaldo Carvalho de Melo b529ccf279 [NETLINK]: Introduce nlmsg_hdr() helper
For the common "(struct nlmsghdr *)skb->data" sequence, so that we reduce the
number of direct accesses to skb->data and for consistency with all the other
cast skb member helpers.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:26:34 -07:00
Arnaldo Carvalho de Melo 27a884dc3c [SK_BUFF]: Convert skb->tail to sk_buff_data_t
So that it is also an offset from skb->head, reduces its size from 8 to 4 bytes
on 64bit architectures, allowing us to combine the 4 bytes hole left by the
layer headers conversion, reducing struct sk_buff size to 256 bytes, i.e. 4
64byte cachelines, and since the sk_buff slab cache is SLAB_HWCACHE_ALIGN...
:-)

Many calculations that previously required that skb->{transport,network,
mac}_header be first converted to a pointer now can be done directly, being
meaningful as offsets or pointers.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 22:26:28 -07:00
Steve Grubb 6a01b07fae [PATCH] audit config lockdown
The following patch adds a new mode to the audit system. It uses the
audit_enabled config option to introduce the idea of audit enabled, but
configuration is immutable. Any attempt to change the configuration
while in this mode is audited. To change the audit rules, you'd need to
reboot the machine.

To use this option, you'd need a modified version of auditctl and use "-e 2".
This is intended to go at the end of the audit.rules file for people that
want an immutable configuration.

This patch also adds "res=" to a number of configuration commands that did not
have it before.

Signed-off-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2007-02-17 21:30:12 -05:00
Nigel Cunningham 7dfb71030f [PATCH] Add include/linux/freezer.h and move definitions from sched.h
Move process freezing functions from include/linux/sched.h to freezer.h, so
that modifications to the freezer or the kernel configuration don't require
recompiling just about everything.

[akpm@osdl.org: fix ueagle driver]
Signed-off-by: Nigel Cunningham <nigel@suspend2.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:27 -08:00
Andrew Morton 4899b8b16b [PATCH] kauditd_thread warning fix
Squash this warning:

  kernel/audit.c: In function 'kauditd_thread':
  kernel/audit.c:367: warning: no return statement in function returning non-void

We might as test kthread_should_stop(), although it's not very pointful at
present.

The code which starts this thread looks racy - the kernel could start multiple
threads.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06 08:53:39 -07:00
Stephen Smalley 1a70cd40cb [PATCH] selinux: rename selinux_ctxid_to_string
Rename selinux_ctxid_to_string to selinux_sid_to_string to be
consistent with other interfaces.

Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26 08:48:52 -07:00
Amy Griffis 8ef2d3040e [PATCH] sanity check audit_buffer
Add sanity checks for NULL audit_buffer consistent with other
audit_log* routines.

Signed-off-by: Amy Griffis <amy.griffis@hp.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-09-11 13:32:17 -04:00
Amy Griffis 6988434ee5 [PATCH] fix oops with CONFIG_AUDIT and !CONFIG_AUDITSYSCALL
Always initialize the audit_inode_hash[] so we don't oops on list rules.

Signed-off-by: Amy Griffis <amy.griffis@hp.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-08-03 10:50:39 -04:00
Darrel Goeddel c7bdb545d2 [NETLINK]: Encapsulate eff_cap usage within security framework.
This patch encapsulates the usage of eff_cap (in netlink_skb_params) within
the security framework by extending security_netlink_recv to include a required
capability parameter and converting all direct usage of eff_caps outside
of the lsm modules to use the interface.  It also updates the SELinux
implementation of the security_netlink_send and security_netlink_recv
hooks to take advantage of the sid in the netlink_skb_params struct.
This also enables SELinux to perform auditing of netlink capability checks.
Please apply, for 2.6.18 if possible.

Signed-off-by: Darrel Goeddel <dgoeddel@trustedcs.com>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by:  James Morris <jmorris@namei.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-29 16:57:55 -07:00
Ingo Molnar 34af946a22 [PATCH] spin/rwlock init cleanups
locking init cleanups:

 - convert " = SPIN_LOCK_UNLOCKED" to spin_lock_init() or DEFINE_SPINLOCK()
 - convert rwlocks in a similar manner

this patch was generated automatically.

Motivation:

 - cleanliness
 - lockdep needs control of lock initialization, which the open-coded
   variants do not give
 - it's also useful for -rt and for lock debugging in general

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 17:32:39 -07:00
Amy Griffis 9c937dcc71 [PATCH] log more info for directory entry change events
When an audit event involves changes to a directory entry, include
a PATH record for the directory itself.  A few other notable changes:

    - fixed audit_inode_child() hooks in fsnotify_move()
    - removed unused flags arg from audit_inode()
    - added audit log routines for logging a portion of a string

Here's some sample output.

before patch:
type=SYSCALL msg=audit(1149821605.320:26): arch=40000003 syscall=39 success=yes exit=0 a0=bf8d3c7c a1=1ff a2=804e1b8 a3=bf8d3c7c items=1 ppid=739 pid=800 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=ttyS0 comm="mkdir" exe="/bin/mkdir" subj=root:system_r:unconfined_t:s0-s0:c0.c255
type=CWD msg=audit(1149821605.320:26):  cwd="/root"
type=PATH msg=audit(1149821605.320:26): item=0 name="foo" parent=164068 inode=164010 dev=03:00 mode=040755 ouid=0 ogid=0 rdev=00:00 obj=root:object_r:user_home_t:s0

after patch:
type=SYSCALL msg=audit(1149822032.332:24): arch=40000003 syscall=39 success=yes exit=0 a0=bfdd9c7c a1=1ff a2=804e1b8 a3=bfdd9c7c items=2 ppid=714 pid=777 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=ttyS0 comm="mkdir" exe="/bin/mkdir" subj=root:system_r:unconfined_t:s0-s0:c0.c255
type=CWD msg=audit(1149822032.332:24):  cwd="/root"
type=PATH msg=audit(1149822032.332:24): item=0 name="/root" inode=164068 dev=03:00 mode=040750 ouid=0 ogid=0 rdev=00:00 obj=root:object_r:user_home_dir_t:s0
type=PATH msg=audit(1149822032.332:24): item=1 name="foo" inode=164010 dev=03:00 mode=040755 ouid=0 ogid=0 rdev=00:00 obj=root:object_r:user_home_t:s0

Signed-off-by: Amy Griffis <amy.griffis@hp.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-06-20 05:25:28 -04:00
Amy Griffis f368c07d72 [PATCH] audit: path-based rules
In this implementation, audit registers inotify watches on the parent
directories of paths specified in audit rules.  When audit's inotify
event handler is called, it updates any affected rules based on the
filesystem event.  If the parent directory is renamed, removed, or its
filesystem is unmounted, audit removes all rules referencing that
inotify watch.

To keep things simple, this implementation limits location-based
auditing to the directory entries in an existing directory.  Given
a path-based rule for /foo/bar/passwd, the following table applies:

    passwd modified -- audit event logged
    passwd replaced -- audit event logged, rules list updated
    bar renamed     -- rule removed
    foo renamed     -- untracked, meaning that the rule now applies to
		       the new location

Audit users typically want to have many rules referencing filesystem
objects, which can significantly impact filtering performance.  This
patch also adds an inode-number-based rule hash to mitigate this
situation.

The patch is relative to the audit git tree:
http://kernel.org/git/?p=linux/kernel/git/viro/audit-current.git;a=summary
and uses the inotify kernel API:
http://lkml.org/lkml/2006/6/1/145

Signed-off-by: Amy Griffis <amy.griffis@hp.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-06-20 05:25:27 -04:00
Serge E. Hallyn 5d136a010d [PATCH] minor audit updates
Just a few minor proposed updates.  Only the last one will
actually affect behavior.  The rest are just misleading
code.

Several AUDIT_SET functions return 'old' value, but only
return value <0 is checked for.  So just return 0.

propagate audit_set_rate_limit and audit_set_backlog_limit
error values

In audit_buffer_free, the audit_freelist_count was being
incremented even when we discard the return buffer, so
audit_freelist_count can end up wrong.  This could cause
the actual freelist to shrink over time, eventually
threatening to degrate audit performance.

Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-06-20 05:25:23 -04:00
Al Viro e1396065e0 [PATCH] collect sid of those who send signals to auditd
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-06-20 05:25:21 -04:00
Al Viro 473ae30bc7 [PATCH] execve argument logging
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-06-20 05:25:21 -04:00
Al Viro 9044e6bca5 [PATCH] fix deadlocks in AUDIT_LIST/AUDIT_LIST_RULES
We should not send a pile of replies while holding audit_netlink_mutex
since we hold the same mutex when we receive commands.  As the result,
we can get blocked while sending and sit there holding the mutex while
auditctl is unable to send the next command and get around to receiving
what we'd sent.

Solution: create skb and put them into a queue instead of sending;
once we are done, send what we've got on the list.  The former can
be done synchronously while we are handling AUDIT_LIST or AUDIT_LIST_RULES;
we are holding audit_netlink_mutex at that point.  The latter is done
asynchronously and without messing with audit_netlink_mutex.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-06-20 05:25:20 -04:00
Steve Grubb ce29b682e2 [PATCH] More user space subject labels
Hi,

The patch below builds upon the patch sent earlier and adds subject label to
all audit events generated via the netlink interface. It also cleans up a few
other minor things.

Signed-off-by: Steve Grubb <sgrubb@redhat.com>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-05-01 06:10:01 -04:00
Steve Grubb e7c3497013 [PATCH] Reworked patch for labels on user space messages
The below patch should be applied after the inode and ipc sid patches.
This patch is a reworking of Tim's patch that has been updated to match
the inode and ipc patches since its similar.

[updated:
>  Stephen Smalley also wanted to change a variable from isec to tsec in the
>  user sid patch.                                                              ]

Signed-off-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-05-01 06:09:58 -04:00
Darrel Goeddel 3dc7e3153e [PATCH] support for context based audit filtering, part 2
This patch provides the ability to filter audit messages based on the
elements of the process' SELinux context (user, role, type, mls sensitivity,
and mls clearance).  It uses the new interfaces from selinux to opaquely
store information related to the selinux context and to filter based on that
information.  It also uses the callback mechanism provided by selinux to
refresh the information when a new policy is loaded.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-05-01 06:09:36 -04:00
OGAWA Hirofumi 9b41046cd0 [PATCH] Don't pass boot parameters to argv_init[]
The boot cmdline is parsed in parse_early_param() and
parse_args(,unknown_bootoption).

And __setup() is used in obsolete_checksetup().

	start_kernel()
		-> parse_args()
			-> unknown_bootoption()
				-> obsolete_checksetup()

If __setup()'s callback (->setup_func()) returns 1 in
obsolete_checksetup(), obsolete_checksetup() thinks a parameter was
handled.

If ->setup_func() returns 0, obsolete_checksetup() tries other
->setup_func().  If all ->setup_func() that matched a parameter returns 0,
a parameter is seted to argv_init[].

Then, when runing /sbin/init or init=app, argv_init[] is passed to the app.
If the app doesn't ignore those arguments, it will warning and exit.

This patch fixes a wrong usage of it, however fixes obvious one only.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 12:18:53 -08:00
Amy Griffis 71e1c784b2 [PATCH] fix audit_init failure path
Make audit_init() failure path handle situations where the audit_panic()
action is not AUDIT_FAIL_PANIC (default is AUDIT_FAIL_PRINTK).  Other uses
of audit_sock are not reached unless audit's netlink message handler is
properly registered.  Bug noticed by Peter Staubach.

Signed-off-by: Amy Griffis <amy.griffis@hp.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-03-20 14:08:55 -05:00
lorenzo@gnu.org bf45da97a4 [PATCH] EXPORT_SYMBOL patch for audit_log, audit_log_start, audit_log_end and audit_format
Hi,

This is a trivial patch that enables the possibility of using some auditing
functions within loadable kernel modules (ie. inside a Linux Security Module).

_

Make the audit_log_start, audit_log_end, audit_format and audit_log
interfaces available to Loadable Kernel Modules, thus making possible
the usage of the audit framework inside LSMs, etc.

Signed-off-by: <Lorenzo Hernández García-Hierro <lorenzo@gnu.org>>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-03-20 14:08:55 -05:00
Ingo Molnar 5a0bbce58b [PATCH] sem2mutex: audit_netlink_sem
Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-03-20 14:08:55 -05:00
Amy Griffis 93315ed6dd [PATCH] audit string fields interface + consumer
Updated patch to dynamically allocate audit rule fields in kernel's
internal representation.  Added unlikely() calls for testing memory
allocation result.

Amy Griffis wrote:     [Wed Jan 11 2006, 02:02:31PM EST]
> Modify audit's kernel-userspace interface to allow the specification
> of string fields in audit rules.
>
> Signed-off-by: Amy Griffis <amy.griffis@hp.com>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
(cherry picked from 5ffc4a863f92351b720fe3e9c5cd647accff9e03 commit)
2006-03-20 14:08:54 -05:00
David Woodhouse fe7752bab2 [PATCH] Fix audit record filtering with !CONFIG_AUDITSYSCALL
This fixes the per-user and per-message-type filtering when syscall
auditing isn't enabled.

[AV: folded followup fix from the same author]

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-03-20 14:08:54 -05:00
Dustin Kirkland 8c8570fb8f [PATCH] Capture selinux subject/object context information.
This patch extends existing audit records with subject/object context
information. Audit records associated with filesystem inodes, ipc, and
tasks now contain SELinux label information in the field "subj" if the
item is performing the action, or in "obj" if the item is the receiver
of an action.

These labels are collected via hooks in SELinux and appended to the
appropriate record in the audit code.

This additional information is required for Common Criteria Labeled
Security Protection Profile (LSPP).

[AV: fixed kmalloc flags use]
[folded leak fixes]
[folded cleanup from akpm (kfree(NULL)]
[folded audit_inode_context() leak fix]
[folded akpm's fix for audit_ipc_perm() definition in case of !CONFIG_AUDIT]

Signed-off-by: Dustin Kirkland <dustin.kirkland@us.ibm.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-03-20 14:08:54 -05:00
Dustin Kirkland c8edc80c8b [PATCH] Exclude messages by message type
- Add a new, 5th filter called "exclude".
    - And add a new field AUDIT_MSGTYPE.
    - Define a new function audit_filter_exclude() that takes a message type
      as input and examines all rules in the filter.  It returns '1' if the
      message is to be excluded, and '0' otherwise.
    - Call the audit_filter_exclude() function near the top of
      audit_log_start() just after asserting audit_initialized.  If the
      message type is not to be audited, return NULL very early, before
      doing a lot of work.
[combined with followup fix for bug in original patch, Nov 4, same author]
[combined with later renaming AUDIT_FILTER_EXCLUDE->AUDIT_FILTER_TYPE
and audit_filter_exclude() -> audit_filter_type()]

Signed-off-by: Dustin Kirkland <dustin.kirkland@us.ibm.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-03-20 14:08:54 -05:00
Steve Grubb 90d526c074 [PATCH] Define new range of userspace messages.
The attached patch updates various items for the new user space
messages. Please apply.

Signed-off-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-03-20 14:08:53 -05:00
Randy Dunlap b0dd25a826 [PATCH] AUDIT: kerneldoc for kernel/audit*.c
- add kerneldoc for non-static functions;
- don't init static data to 0;
- limit lines to < 80 columns;
- fix long-format style;
- delete whitespace at end of some lines;

(chrisw: resend and update to current audit-2.6 tree)

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-03-20 14:08:53 -05:00
Alan Cox 715b49ef2d [PATCH] EDAC: atomic scrub operations
EDAC requires a way to scrub memory if an ECC error is found and the chipset
does not do the work automatically.  That means rewriting memory locations
atomically with respect to all CPUs _and_ bus masters.  That means we can't
use atomic_add(foo, 0) as it gets optimised for non-SMP

This adds a function to include/asm-foo/atomic.h for the platforms currently
supported which implements a scrub of a mapped block.

It also adjusts a few other files include order where atomic.h is included
before types.h as this now causes an error as atomic_scrub uses u32.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-18 19:20:30 -08:00
Adrian Bunk 97a41e2612 [PATCH] kernel/: small cleanups
This patch contains the following cleanups:
- make needlessly global functions static
- every file should include the headers containing the prototypes for
  it's global functions

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 20:13:48 -08:00
Pierre Ossman 7a4ae749a4 [PATCH] Add try_to_freeze to kauditd
kauditd was causing suspends to fail because it refused to freeze.  Adding
a try_to_freeze() to its sleep loop solves the issue.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Acked-by: Pavel Machek <pavel@suse.cz>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12 08:57:43 -08:00
Al Viro 9796fdd829 [PATCH] gfp_t: kernel/*
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28 08:16:49 -07:00
Al Viro dd0fc66fb3 [PATCH] gfp flags annotations - part 1
- added typedef unsigned int __nocast gfp_t;

 - replaced __nocast uses for gfp flags with gfp_t - it gives exactly
   the same warnings as far as sparse is concerned, doesn't change
   generated code (from gcc point of view we replaced unsigned int with
   typedef) and documents what's going on far better.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-08 15:00:57 -07:00
Linus Torvalds 5d54e69c68 Merge master.kernel.org:/pub/scm/linux/kernel/git/dwmw2/audit-2.6 2005-09-13 09:47:30 -07:00
Patrick McHardy 066286071d [NETLINK]: Add "groups" argument to netlink_kernel_create
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29 16:01:11 -07:00
Harald Welte 4fdb3bb723 [NETLINK]: Add properly module refcounting for kernel netlink sockets.
- Remove bogus code for compiling netlink as module
- Add module refcounting support for modules implementing a netlink
  protocol
- Add support for autoloading modules that implement a netlink protocol
  as soon as someone opens a socket for that protocol

Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29 15:35:08 -07:00
Amy Griffis 3c789a1905 AUDIT: Prevent duplicate syscall rules
The following patch against audit.81 prevents duplicate syscall rules in
a given filter list by walking the list on each rule add.

I also removed the unused struct audit_entry in audit.c and made the
static inlines in auditsc.c consistent.

Signed-off-by: Amy Griffis <amy.griffis@hp.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-08-17 16:05:35 +01:00
David Woodhouse ce625a8016 AUDIT: Reduce contention in audit_serial()
... by generating serial numbers only if an audit context is actually
_used_, rather than doing so at syscall entry even when the context
isn't necessarily marked auditable.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-07-18 14:24:46 -04:00
David Woodhouse d5b454f2c4 AUDIT: Fix livelock in audit_serial().
The tricks with atomic_t were bizarre. Just do it sensibly instead.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-07-15 12:56:03 +01:00
Victor Fusco 6c8c8ba5d7 [AUDIT] Fix sparse warning about gfp_mask type
Fix the sparse warning "implicit cast to nocast type"

Signed-off-by: Victor Fusco <victor@cetuc.puc-rio.br>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-07-13 22:26:57 +01:00
David Woodhouse ac4cec443a AUDIT: Stop waiting for backlog after audit_panic() happens
We force a rate-limit on auditable events by making them wait for space 
on the backlog queue. However, if auditd really is AWOL then this could 
potentially bring the entire system to a halt, depending on the audit 
rules in effect.

Firstly, make sure the wait time is honoured correctly -- it's the 
maximum time the process should wait, rather than the time to wait 
_each_ time round the loop. We were getting re-woken _each_ time a 
packet was dequeued, and the timeout was being restarted each time.

Secondly, reset the wait time after audit_panic() is called. In general 
this will be reset to zero, to allow progress to be made. If the system
is configured to _actually_ panic on audit_panic() then that will 
already have happened; otherwise we know that audit records are being 
lost anyway. 

These two tunables can't be exposed via AUDIT_GET and AUDIT_SET because 
those aren't particularly well-designed. It probably should have been 
done by sysctls or sysfs anyway -- one for a later patch.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-07-02 14:08:48 +01:00
David Woodhouse e1b09eba26 AUDIT: Use KERN_NOTICE for printk of audit records
They aren't errors.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-06-24 17:24:11 +01:00
David Woodhouse 5bb289b5a0 AUDIT: Clean up user message filtering
Don't look up the task by its pid and then use the syscall filtering
helper. Just implement our own filter helper which operates solely on
the information in the netlink_skb_parms. 

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-06-24 14:14:05 +01:00
David Woodhouse 9470178e62 AUDIT: Remove stray declaration of tsk from audit_receive_msg().
It's not used any more.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-06-22 15:40:55 +01:00
David Woodhouse 9ad9ad385b AUDIT: Wait for backlog to clear when generating messages.
Add a gfp_mask to audit_log_start() and audit_log(), to reduce the
amount of GFP_ATOMIC allocation -- most of it doesn't need to be 
GFP_ATOMIC. Also if the mask includes __GFP_WAIT, then wait up to
60 seconds for the auditd backlog to clear instead of immediately 
abandoning the message. 

The timeout should probably be made configurable, but for now it'll 
suffice that it only happens if auditd is actually running.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-06-22 15:04:33 +01:00
David Woodhouse 4a4cd633b5 AUDIT: Optimise the audit-disabled case for discarding user messages
Also exempt USER_AVC message from being discarded to preserve 
existing behaviour for SE Linux.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-06-22 14:56:47 +01:00
David Woodhouse f6a789d198 AUDIT: Spawn kernel thread to list filter rules.
If we have enough rules to fill the netlink buffer space, it'll 
deadlock because auditctl isn't ever actually going to read from the 
socket until we return, and we aren't going to return until it 
reads... so we spawn a kernel thread to spew out the list and then
exit.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-06-21 16:22:01 +01:00
David Woodhouse d6e0e1585a AUDIT: Drop user-generated messages immediately while auditing disabled.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-06-20 16:02:09 +01:00
David Woodhouse 0f45aa18e6 AUDIT: Allow filtering of user messages
Turn the field from a bitmask to an enumeration and add a list to allow 
filtering of messages generated by userspace. We also define a list for 
file system watches in anticipation of that feature.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-06-19 19:35:50 +01:00
David Woodhouse bccf6ae083 AUDIT: Unify auid reporting, put arch before syscall number
These changes make processing of audit logs easier. Based on a patch
from Steve Grubb <sgrubb@redhat.com>

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-23 21:35:28 +01:00
David Woodhouse bfb4496e72 AUDIT: Assign serial number to non-syscall messages
Move audit_serial() into audit.c and use it to generate serial numbers 
on messages even when there is no audit context from syscall auditing.  
This allows us to disambiguate audit records when more than one is 
generated in the same millisecond.

Based on a patch by Steve Grubb after he observed the problem.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-21 21:08:09 +01:00
Steve Grubb 326e9c8ba6 AUDIT: Fix inconsistent use of loginuid vs. auid, signed vs. unsigned
The attached patch changes all occurrences of loginuid to auid. It also 
changes everything to %u that is an unsigned type.

Signed-off-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-21 00:22:31 +01:00
Steve Grubb 05474106a4 AUDIT: Fix AVC_USER message passing.
The original AVC_USER message wasn't consolidated with the new range of
user messages. The attached patch fixes the kernel so the old messages 
work again.

Signed-off-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-21 00:18:37 +01:00
David Woodhouse fb19b4c6aa AUDIT: Honour audit_backlog_limit again.
The limit on the number of outstanding audit messages was inadvertently
removed with the switch to queuing skbs directly for sending by a kernel
thread. Put it back again.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-19 14:55:56 +01:00
David Woodhouse b7d1125817 AUDIT: Send netlink messages from a separate kernel thread
netlink_unicast() will attempt to reallocate and will free messages if
the socket's rcvbuf limit is reached unless we give it an infinite 
timeout. So do that, from a kernel thread which is dedicated to spewing
stuff up the netlink socket.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-19 10:56:58 +01:00
Steve Grubb 168b717395 AUDIT: Clean up logging of untrusted strings
* If vsnprintf returns -1, it will mess up the sk buffer space accounting. 
This is fixed by not calling skb_put with bogus len values.

* audit_log_hex was a loop that called audit_log_vformat with %02X for each 
character. This is very inefficient since conversion from unsigned character 
to Ascii representation is essentially masking, shifting, and byte lookups. 
Also, the length of the converted string is well known - it's twice the 
original. Fixed by rewriting the function.

* audit_log_untrustedstring had no comments. This makes it hard for 
someone to understand what the string format will be.

* audit_log_d_path was never fixed to use untrustedstring. This could mess
up user space parsers. This was fixed to make a temp buffer, call d_path, 
and log temp buffer using untrustedstring. 

From: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-19 10:24:22 +01:00
David Woodhouse 209aba0324 AUDIT: Treat all user messages identically.
It's silly to have to add explicit entries for new userspace messages
as we invent them. Just treat all messages in the user range the same.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-18 10:21:07 +01:00
David Woodhouse 5e014b10ef AUDIT: fix max_t thinko.
Der... if you use max_t it helps if you give it a type. 

Note to self: Always just apply the tested patches, don't try to port 
them by hand. You're not clever enough.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-13 18:50:33 +01:00
Steve Grubb 23f32d18aa AUDIT: Fix some spelling errors
I'm going through the kernel code and have a patch that corrects 
several spelling errors in comments.

From: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-13 18:35:15 +01:00
Steve Grubb c04049939f AUDIT: Add message types to audit records
This patch adds more messages types to the audit subsystem so that audit 
analysis is quicker, intuitive, and more useful.

Signed-off-by: Steve Grubb <sgrubb@redhat.com>
---
I forgot one type in the big patch. I need to add one for user space 
originating SE Linux avc messages. This is used by dbus and nscd.

-Steve
---
Updated to 2.6.12-rc4-mm1.
-dwmw2

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-13 18:17:42 +01:00
David Woodhouse 9ea74f0655 AUDIT: Round up audit skb expansion to AUDIT_BUFSIZ.
Otherwise, we will be repeatedly reallocating, even if we're only
adding a few bytes at a time. Pointed out by Steve Grubb.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-13 16:35:19 +01:00
Chris Wright c1b773d87e Add audit_log_type
Add audit_log_type to allow callers to specify type and pid when logging.
Convert audit_log to wrapper around audit_log_type.  Could have
converted all audit_log callers directly, but common case is default
of type AUDIT_KERNEL and pid 0.  Update audit_log_start to take type
and pid values when creating a new audit_buffer.  Move sequences that
did audit_log_start, audit_log_format, audit_set_type, audit_log_end,
to simply call audit_log_type directly.  This obsoletes audit_set_type
and audit_set_pid, so remove them.

Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-11 10:55:10 +01:00
Chris Wright 197c69c6af Move ifdef CONFIG_AUDITSYSCALL to header
Remove code conditionally dependent on CONFIG_AUDITSYSCALL from audit.c.
Move these dependencies to audit.h with the rest.

Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-11 10:54:05 +01:00
Chris Wright 804a6a49d8 Audit requires CONFIG_NET
Audit now actually requires netlink.  So make it depend on CONFIG_NET, 
and remove the inline dependencies on CONFIG_NET.

Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-11 10:52:45 +01:00
Chris Wright 5a241d7703 AUDIT: Properly account for alignment difference in nlmsg_len.
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-11 10:43:07 +01:00
David Woodhouse eecb0a7338 AUDIT: Fix abuse of va_args.
We're not allowed to use args twice; we need to use va_copy.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-10 18:58:51 +01:00
David Woodhouse e3b926b4c1 AUDIT: pass size argument to audit_expand().
Let audit_expand() know how much it's expected to grow the buffer, in 
the case that we have that information to hand.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-10 18:56:08 +01:00
Steve Grubb 8c5aa40c94 AUDIT: Fix reported length of audit messages.
We were setting nlmsg_len to skb->len, but we should be subtracting
the size of the header.

From: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-10 18:53:07 +01:00
David Woodhouse 4332bdd332 AUDIT: Honour gfp_mask in audit_buffer_alloc()
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-06 15:59:57 +01:00
Chris Wright 5ac52f33b6 AUDIT: buffer audit msgs directly to skb
Drop the use of a tmp buffer in the audit_buffer, and just buffer
directly to the skb.  All header data that was temporarily stored in
the audit_buffer can now be stored directly in the netlink header in
the skb.  Resize skb as needed.  This eliminates the extra copy (and
the audit_log_move function which was responsible for copying).

Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-06 15:54:53 +01:00
Chris Wright 8fc6115c2a AUDIT: expand audit tmp buffer as needed
Introduce audit_expand and make the audit_buffer use a dynamic buffer
which can be resized.  When audit buffer is moved to skb it will not
be fragmented across skb's, so we can eliminate the sklist in the
audit_buffer.  During audit_log_move, we simply copy the full buffer
into a single skb, and then audit_log_drain sends it on.

Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-06 15:54:17 +01:00
Chris Wright 16e1904e69 AUDIT: Add helper functions to allocate and free audit_buffers.
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-06 15:53:34 +01:00
Steve Grubb c2f0c7c356 The attached patch addresses the problem with getting the audit daemon
shutdown credential information. It creates a new message type 
AUDIT_TERM_INFO, which is used by the audit daemon to query who issued the 
shutdown. 

It requires the placement of a hook function that gathers the information. The 
hook is after the DAC & MAC checks and before the function returns. Racing 
threads could overwrite the uid & pid - but they would have to be root and 
have policy that allows signalling the audit daemon. That should be a 
manageable risk.

The userspace component will be released later in audit 0.7.2. When it 
receives the TERM signal, it queries the kernel for shutdown information. 
When it receives it, it writes the message and exits. The message looks 
like this:

type=DAEMON msg=auditd(1114551182.000) auditd normal halt, sending pid=2650 
uid=525, auditd pid=1685

Signed-off-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-06 12:38:39 +01:00
David Woodhouse bfd4bda097 Merge with master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6.git 2005-05-05 13:59:37 +01:00
Herbert Xu 2a0a6ebee1 [NETLINK]: Synchronous message processing.
Let's recap the problem.  The current asynchronous netlink kernel
message processing is vulnerable to these attacks:

1) Hit and run: Attacker sends one or more messages and then exits
before they're processed.  This may confuse/disable the next netlink
user that gets the netlink address of the attacker since it may
receive the responses to the attacker's messages.

Proposed solutions:

a) Synchronous processing.
b) Stream mode socket.
c) Restrict/prohibit binding.

2) Starvation: Because various netlink rcv functions were written
to not return until all messages have been processed on a socket,
it is possible for these functions to execute for an arbitrarily
long period of time.  If this is successfully exploited it could
also be used to hold rtnl forever.

Proposed solutions:

a) Synchronous processing.
b) Stream mode socket.

Firstly let's cross off solution c).  It only solves the first
problem and it has user-visible impacts.  In particular, it'll
break user space applications that expect to bind or communicate
with specific netlink addresses (pid's).

So we're left with a choice of synchronous processing versus
SOCK_STREAM for netlink.

For the moment I'm sticking with the synchronous approach as
suggested by Alexey since it's simpler and I'd rather spend
my time working on other things.

However, it does have a number of deficiencies compared to the
stream mode solution:

1) User-space to user-space netlink communication is still vulnerable.

2) Inefficient use of resources.  This is especially true for rtnetlink
since the lock is shared with other users such as networking drivers.
The latter could hold the rtnl while communicating with hardware which
causes the rtnetlink user to wait when it could be doing other things.

3) It is still possible to DoS all netlink users by flooding the kernel
netlink receive queue.  The attacker simply fills the receive socket
with a single netlink message that fills up the entire queue.  The
attacker then continues to call sendmsg with the same message in a loop.

Point 3) can be countered by retransmissions in user-space code, however
it is pretty messy.

In light of these problems (in particular, point 3), we should implement
stream mode netlink at some point.  In the mean time, here is a patch
that implements synchronous processing.  

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-03 14:55:09 -07:00
Chris Wright 0dd8e06bda [PATCH] add new audit data to last skb
When adding more formatted audit data to an skb for delivery to userspace,
the kernel will attempt to reuse an skb that has spare room.  However, if
the audit message has already been fragmented to multiple skb's, the search
for spare room in the skb uses the head of the list.  This will corrupt the
audit message with trailing bytes being placed midway through the stream.
Fix is to look at the end of the list.

Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-05-03 14:01:15 +01:00
Chris Wright 37509e749d [AUDIT] Requeue messages at head of queue, up to audit_backlog
If netlink_unicast() fails, requeue the skb back at the head of the queue
it just came from, instead of the tail. And do so unless we've exceeded
the audit_backlog limit; not according to some other arbitrary limit.

From: Chris Wright <chrisw@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-04-29 17:19:14 +01:00
Serge Hallyn c94c257c88 Add audit uid to netlink credentials
Most audit control messages are sent over netlink.In order to properly
log the identity of the sender of audit control messages, we would like
to add the loginuid to the netlink_creds structure, as per the attached
patch.

Signed-off-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-04-29 16:27:17 +01:00
85c8721ff3 audit: update pointer to userspace tools, remove emacs mode tags 2005-04-29 16:23:29 +01:00
Peter Martuccelli c7fcb0ee74 [AUDIT] Avoid using %*.*s format strings.
They don't seem to work correctly (investigation ongoing), but we don't
actually need to do it anyway.

Patch from Peter Martuccelli <peterm@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-04-29 16:10:24 +01:00
Steve Grubb d812ddbb89 [AUDIT] Fix signedness of 'serial' in various routines.
Attached is a patch that corrects a signed/unsigned warning. I also noticed
that we needlessly init serial to 0. That only needs to occur if the kernel
was compiled without the audit system.

-Steve Grubb

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-04-29 16:09:52 +01:00
Andrew Morton 81b7854d52 audit_log_untrustedstring() warning fix
kernel/audit.c: In function `audit_log_untrustedstring':
kernel/audit.c:736: warning: comparison is always false due to limited range of data type

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-04-29 15:59:11 +01:00
83c7d09173 AUDIT: Avoid log pollution by untrusted strings.
We log strings from userspace, such as arguments to open(). These could
be formatted to contain \n followed by fake audit log entries. Provide
a function for logging such strings, which gives a hex dump when the
string contains anything but basic printable ASCII characters. Use it
for logging filenames.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2005-04-29 15:54:44 +01:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00