Граф коммитов

555 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds 86ea51d4a2 Merge branch 'merge-devicetree' of git://git.secretlab.ca/git/linux-2.6
* 'merge-devicetree' of git://git.secretlab.ca/git/linux-2.6:
  spi.h: missing kernel-doc notation, please fix
  of: fix missing headers for of_address_to_resource() in MTD and SysACE drivers
  of: Fix missing includes
  ata: update for of_device to platform_device replacement
  microblaze: Fix of: eliminate of_device->node and dev_archdata->{of,prom}_node
  microblaze: Fix of/address: Merge all of the bus translation code
  booting-without-of: Remove nonexistent chapters from TOC, fix numbering
2010-08-18 09:26:17 -07:00
David Howells d7627467b7 Make do_execve() take a const filename pointer
Make do_execve() take a const filename pointer so that kernel_execve() compiles
correctly on ARM:

arch/arm/kernel/sys_arm.c:88: warning: passing argument 1 of 'do_execve' discards qualifiers from pointer target type

This also requires the argv and envp arguments to be consted twice, once for
the pointer array and once for the strings the array points to.  This is
because do_execve() passes a pointer to the filename (now const) to
copy_strings_kernel().  A simpler alternative would be to cast the filename
pointer in do_execve() when it's passed to copy_strings_kernel().

do_execve() may not change any of the strings it is passed as part of the argv
or envp lists as they are some of them in .rodata, so marking these strings as
const should be fine.

Further kernel_execve() and sys_execve() need to be changed to match.

This has been test built on x86_64, frv, arm and mips.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-17 18:07:43 -07:00
Grant Likely f1ca09b2b5 of: Fix missing includes
This patch fixes missing includes from a number of .c files because
the code (wrongfully) depended on prom.h including them.  The include
of linux/of_address.h was removed in microblaze prom.h in commit
"of/address: Clean up function declarations" (sha1 id 22ae782f8), but
not fixed in some callers.  This patch fixes them up.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Tested-by: Michal Simek <monstr@monstr.eu>
2010-08-16 23:44:49 -06:00
Michal Simek 088ab302f2 microblaze: Fix of: eliminate of_device->node and dev_archdata->{of,prom}_node
Commit 58f9b0b024 should
contain this fix too.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-08-16 14:55:48 -06:00
Michal Simek a8dcb878b6 microblaze: Fix of/address: Merge all of the bus translation code
Commit dbbdee9473 removed
of_irq_pci_swizzle but didn't use pci_swizzle_interrupt_pin
instead.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-08-16 14:55:46 -06:00
Sam Ravnborg 8b1bb90701 defconfig reduction
Use the defconfig files generated by "make savedefconfig" for
remaining defconfig files.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2010-08-14 22:26:53 +02:00
David Howells c788732523 Mark arguments to certain syscalls as being const
Mark arguments to certain system calls as being const where they should be but
aren't.  The list includes:

 (*) The filename arguments of various stat syscalls, execve(), various utimes
     syscalls and some mount syscalls.

 (*) The filename arguments of some syscall helpers relating to the above.

 (*) The buffer argument of various write syscalls.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-13 16:53:13 -07:00
FUJITA Tomonori 3b9c6c11f5 dma-mapping: remove dma_is_consistent API
Architectures implement dma_is_consistent() in different ways (some
misinterpret the definition of API in DMA-API.txt).  So it hasn't been so
useful for drivers.  We have only one user of the API in tree.  Unlikely
out-of-tree drivers use the API.

Even if we fix dma_is_consistent() in some architectures, it doesn't look
useful at all.  It was invented long ago for some old systems that can't
allocate coherent memory at all.  It's better to export only APIs that are
definitely necessary for drivers.

Let's remove this API.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:21 -07:00
FUJITA Tomonori 4565f0170d dma-mapping: unify dma_get_cache_alignment implementations
dma_get_cache_alignment returns the minimum DMA alignment.  Architectures
defines it as ARCH_DMA_MINALIGN (formally ARCH_KMALLOC_MINALIGN).  So we
can unify dma_get_cache_alignment implementations.

Note that some architectures implement dma_get_cache_alignment wrongly.
dma_get_cache_alignment() should return the minimum DMA alignment.  So
fully-coherent architectures should return 1.  This patch also fixes this
issue.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:21 -07:00
FUJITA Tomonori a6eb9fe105 dma-mapping: rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN
Now each architecture has the own dma_get_cache_alignment implementation.

dma_get_cache_alignment returns the minimum DMA alignment.  Architectures
define it as ARCH_KMALLOC_MINALIGN (it's used to make sure that malloc'ed
buffer is DMA-safe; the buffer doesn't share a cache with the others).  So
we can unify dma_get_cache_alignment implementations.

This patch:

dma_get_cache_alignment() needs to know if an architecture defines
ARCH_KMALLOC_MINALIGN or not (needs to know if architecture has DMA
alignment restriction).  However, slab.h define ARCH_KMALLOC_MINALIGN if
architectures doesn't define it.

Let's rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN.
ARCH_KMALLOC_MINALIGN is used only in the internals of slab/slob/slub
(except for crypto).

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:21 -07:00
Linus Torvalds 2f9e825d3e Merge branch 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block: (149 commits)
  block: make sure that REQ_* types are seen even with CONFIG_BLOCK=n
  xen-blkfront: fix missing out label
  blkdev: fix blkdev_issue_zeroout return value
  block: update request stacking methods to support discards
  block: fix missing export of blk_types.h
  writeback: fix bad _bh spinlock nesting
  drbd: revert "delay probes", feature is being re-implemented differently
  drbd: Initialize all members of sync_conf to their defaults [Bugz 315]
  drbd: Disable delay probes for the upcomming release
  writeback: cleanup bdi_register
  writeback: add new tracepoints
  writeback: remove unnecessary init_timer call
  writeback: optimize periodic bdi thread wakeups
  writeback: prevent unnecessary bdi threads wakeups
  writeback: move bdi threads exiting logic to the forker thread
  writeback: restructure bdi forker loop a little
  writeback: move last_active to bdi
  writeback: do not remove bdi from bdi_list
  writeback: simplify bdi code a little
  writeback: do not lose wake-ups in bdi threads
  ...

Fixed up pretty trivial conflicts in drivers/block/virtio_blk.c and
drivers/scsi/scsi_error.c as per Jens.
2010-08-10 15:22:42 -07:00
FUJITA Tomonori 7e005f7979 remove needless ISA_DMA_THRESHOLD
Architectures don't need to define ISA_DMA_THRESHOLD anymore.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: James Bottomley <James.Bottomley@suse.de>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:15:50 +02:00
Linus Torvalds b62ad9ab18 Merge branch 'timers-timekeeping-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-timekeeping-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  um: Fix read_persistent_clock fallout
  kgdb: Do not access xtime directly
  powerpc: Clean up obsolete code relating to decrementer and timebase
  powerpc: Rework VDSO gettimeofday to prevent time going backwards
  clocksource: Add __clocksource_updatefreq_hz/khz methods
  x86: Convert common clocksources to use clocksource_register_hz/khz
  timekeeping: Make xtime and wall_to_monotonic static
  hrtimer: Cleanup direct access to wall_to_monotonic
  um: Convert to use read_persistent_clock
  timkeeping: Fix update_vsyscall to provide wall_to_monotonic offset
  powerpc: Cleanup xtime usage
  powerpc: Simplify update_vsyscall
  time: Kill off CONFIG_GENERIC_TIME
  time: Implement timespec_add
  x86: Fix vtime/file timestamp inconsistencies

Trivial conflicts in Documentation/feature-removal-schedule.txt

Much less trivial conflicts in arch/powerpc/kernel/time.c resolved as
per Thomas' earlier merge commit 47916be4e2 ("Merge branch
'powerpc.cherry-picks' into timers/clocksource")
2010-08-06 13:18:29 -07:00
Linus Torvalds 4aed2fd8e3 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (162 commits)
  tracing/kprobes: unregister_trace_probe needs to be called under mutex
  perf: expose event__process function
  perf events: Fix mmap offset determination
  perf, powerpc: fsl_emb: Restore setting perf_sample_data.period
  perf, powerpc: Convert the FSL driver to use local64_t
  perf tools: Don't keep unreferenced maps when unmaps are detected
  perf session: Invalidate last_match when removing threads from rb_tree
  perf session: Free the ref_reloc_sym memory at the right place
  x86,mmiotrace: Add support for tracing STOS instruction
  perf, sched migration: Librarize task states and event headers helpers
  perf, sched migration: Librarize the GUI class
  perf, sched migration: Make the GUI class client agnostic
  perf, sched migration: Make it vertically scrollable
  perf, sched migration: Parameterize cpu height and spacing
  perf, sched migration: Fix key bindings
  perf, sched migration: Ignore unhandled task states
  perf, sched migration: Handle ignored migrate out events
  perf: New migration tool overview
  tracing: Drop cpparg() macro
  perf: Use tracepoint_synchronize_unregister() to flush any pending tracepoint call
  ...

Fix up trivial conflicts in Makefile and drivers/cpufreq/cpufreq.c
2010-08-06 09:30:52 -07:00
Linus Torvalds 03c0c29aff Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (63 commits)
  of/platform: Register of_platform_drivers with an "of:" prefix
  of/address: Clean up function declarations
  of/spi: call of_register_spi_devices() from spi core code
  of: Provide default of_node_to_nid() implementation.
  of/device: Make of_device_make_bus_id() usable by other code.
  of/irq: Fix endian issues in parsing interrupt specifiers
  of: Fix phandle endian issues
  of/flattree: fix of_flat_dt_is_compatible() to match the full compatible string
  of: remove of_default_bus_ids
  of: make of_find_device_by_node generic
  microblaze: remove references to of_device and to_of_device
  sparc: remove references to of_device and to_of_device
  powerpc: remove references to of_device and to_of_device
  of/device: Replace of_device with platform_device in includes and core code
  of/device: Protect against binding of_platform_drivers to non-OF devices
  of: remove asm/of_device.h
  of: remove asm/of_platform.h
  of/platform: remove all of_bus_type and of_platform_bus_type references
  of: Merge of_platform_bus_type with platform_bus_type
  drivercore/of: Add OF style matching to platform bus
  ...

Fix up trivial conflicts in arch/microblaze/kernel/Makefile due to just
some obj-y removals by the devicetree branch, while the microblaze
updates added a new file.
2010-08-05 15:57:35 -07:00
Linus Torvalds bbc4fd12a6 Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (49 commits)
  microblaze: Add KGDB support
  microblaze: Support brki rX, 0x18 for user application debugging
  microblaze: Remove nop after MSRCLR/SET, MTS, MFS instructions
  microblaze: Simplify syscall rutine
  microblaze: Move PT_MODE saving to delay slot
  microblaze: Fix _interrupt function
  microblaze: Fix _user_exception function
  microblaze: Put together addik instructions
  microblaze: Use delay slot in syscall macros
  microblaze: Save kernel mode in delay slot
  microblaze: Do not mix register saving and mode setting
  microblaze: Move SAVE_STATE upward
  microblaze: entry.S: Macro optimization
  microblaze: Optimize hw exception rutine
  microblaze: Implement clear_ums macro and fix SAVE_STATE macro
  microblaze: Remove additional setup for kernel_mode
  microblaze: Optimize SAVE_STATE macro
  microblaze: Remove additional loading
  microblaze: Completely remove working with R11 register
  microblaze: Do not setup BIP in _debug_exception
  ...
2010-08-05 08:59:22 -07:00
Linus Torvalds 3cfc2c42c1 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (48 commits)
  Documentation: update broken web addresses.
  fix comment typo "choosed" -> "chosen"
  hostap:hostap_hw.c Fix typo in comment
  Fix spelling contorller -> controller in comments
  Kconfig.debug: FAIL_IO_TIMEOUT: typo Faul -> Fault
  fs/Kconfig: Fix typo Userpace -> Userspace
  Removing dead MACH_U300_BS26
  drivers/infiniband: Remove unnecessary casts of private_data
  fs/ocfs2: Remove unnecessary casts of private_data
  libfc: use ARRAY_SIZE
  scsi: bfa: use ARRAY_SIZE
  drm: i915: use ARRAY_SIZE
  drm: drm_edid: use ARRAY_SIZE
  synclink: use ARRAY_SIZE
  block: cciss: use ARRAY_SIZE
  comment typo fixes: charater => character
  fix comment typos concerning "challenge"
  arm: plat-spear: fix typo in kerneldoc
  reiserfs: typo comment fix
  update email address
  ...
2010-08-04 15:31:02 -07:00
Linus Torvalds 6ba74014c1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1443 commits)
  phy/marvell: add 88ec048 support
  igb: Program MDICNFG register prior to PHY init
  e1000e: correct MAC-PHY interconnect register offset for 82579
  hso: Add new product ID
  can: Add driver for esd CAN-USB/2 device
  l2tp: fix export of header file for userspace
  can-raw: Fix skb_orphan_try handling
  Revert "net: remove zap_completion_queue"
  net: cleanup inclusion
  phy/marvell: add 88e1121 interface mode support
  u32: negative offset fix
  net: Fix a typo from "dev" to "ndev"
  igb: Use irq_synchronize per vector when using MSI-X
  ixgbevf: fix null pointer dereference due to filter being set for VLAN 0
  e1000e: Fix irq_synchronize in MSI-X case
  e1000e: register pm_qos request on hardware activation
  ip_fragment: fix subtracting PPPOE_SES_HLEN from mtu twice
  net: Add getsockopt support for TCP thin-streams
  cxgb4: update driver version
  cxgb4: add new PCI IDs
  ...

Manually fix up conflicts in:
 - drivers/net/e1000e/netdev.c: due to pm_qos registration
   infrastructure changes
 - drivers/net/phy/marvell.c: conflict between adding 88ec048 support
   and cleaning up the IDs
 - drivers/net/wireless/ipw2x00/ipw2100.c: trivial ipw2100_pm_qos_req
   conflict (registration change vs marking it static)
2010-08-04 11:47:58 -07:00
Jiri Kosina d790d4d583 Merge branch 'master' into for-next 2010-08-04 15:14:38 +02:00
Michal Simek 2d5973cb5a microblaze: Add KGDB support
Kgdb uses brki r16, 0x18 instruction to call
low level _debug_exception function which save
current state to pt_regs and call microblaze_kgdb_break
function. _debug_exception should be called only from
the kernel space. User space calling is not supported
because user application debugging uses different handling.

pt_regs_to_gdb_regs loads additional special registers
which can't be changed

 * Enable KGDB in Kconfig
 * Remove ancient not-tested KGDB support
 * Remove ancient _debug_exception code from entry.S

Only MMU KGDB support is supported.

Signed-off-by: Michal Simek <monstr@monstr.eu>
CC: Jason Wessel <jason.wessel@windriver.com>
CC: John Williams <john.williams@petalogix.com>
CC: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
CC: linux-kernel@vger.kernel.org
Acked-by: Jason Wessel <jason.wessel@windriver.com>
2010-08-04 10:45:17 +02:00
Michal Simek 751f1605e0 microblaze: Support brki rX, 0x18 for user application debugging
This is the first patch which add support for
user application debugging through brki rX, 0x18 vector.

This patch has side effect which also remove security issue
to use brki rX, 0x18 to freeze kernel.

Support for old gdb support via priviledged exception
(brk r0, r0) is still there. It will be remove in future.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:45:16 +02:00
Michal Simek 958063e67b microblaze: Remove nop after MSRCLR/SET, MTS, MFS instructions
We need to save instruction and the latest Microblaze shouldn't
have any problem with it.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:45:16 +02:00
Michal Simek 0e41c90908 microblaze: Simplify syscall rutine
Syscall can be called only from userspace that's why
we don't need to check which space kernel come from.

Kernel syscall calling is not check and shouldn't come
throught this part of code.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:45:15 +02:00
Michal Simek 0a6b08fda6 microblaze: Move PT_MODE saving to delay slot
We can save one more instruction if PT_MODE is saved in delay slot

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:45:14 +02:00
Michal Simek 80c5ff6b9b microblaze: Fix _interrupt function
Save instructions by using delay slot and
clear UMS only if kernel comes from user space.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:45:13 +02:00
Michal Simek 25f6e59657 microblaze: Fix _user_exception function
Saving some instructions. Clear VMS bit if kernel comes
from kernel space.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:45:12 +02:00
Michal Simek 287503fabd microblaze: Put together addik instructions
Saving instructions by adding 2/3 addik instructions to one.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:44:56 +02:00
Michal Simek 9814cc11e5 microblaze: Use delay slot in syscall macros
Saving instruction with delay slot usage.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:32:22 +02:00
Michal Simek da23355280 microblaze: Save kernel mode in delay slot
This change save one instruction if kernel comes from kernel
space.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:32:21 +02:00
Michal Simek e7741075b3 microblaze: Do not mix register saving and mode setting
Separate reg saving and mode setting.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:32:20 +02:00
Michal Simek e5d2af2b96 microblaze: Move SAVE_STATE upward
SAVE_STATE macro could be used by other rutines too.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:31:09 +02:00
Michal Simek 66f7de8634 microblaze: entry.S: Macro optimization
We are not working with values from MSR that's why
we can discard it and use r11 for different purpose without
saving/restoring.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:30:07 +02:00
Michal Simek c318d483b3 microblaze: Optimize hw exception rutine
Remove set_vms because UMS is cleared and VMS is already setup.
Optimize function calling which save one additional instruction.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:30:06 +02:00
Michal Simek b318067e2c microblaze: Implement clear_ums macro and fix SAVE_STATE macro
VMS is always setup because VM mode was before
exception/syscall/interrupt. Kernel continues in kernel mode
that's why we have to clear UMS bit if kernel comes from
user space.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:29:44 +02:00
Michal Simek 77f6d22605 microblaze: Remove additional setup for kernel_mode
PT_MODE stores information if kernel comes from user
or kernel space. If come from user space, PT_MODE
contains 0. If come from kernel store, PT_MODE contains
non zero value. We don't need to save value 1. I am using
r1 register which contains non zero value.
This change save one additional instruction.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:53 +02:00
Michal Simek 06a54604a3 microblaze: Optimize SAVE_STATE macro
SAVE_STATE macro could be used for user_exception
or interrupt functions.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:52 +02:00
Michal Simek 40eb0dc456 microblaze: Remove additional loading
We don't need to save r0 to PT_R0. It could be additional
operation.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:51 +02:00
Michal Simek 653e447e11 microblaze: Completely remove working with R11 register
We don't need to save R11 register. There is easy way
to use only R1 which is saved and restore later.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:50 +02:00
Michal Simek 0388107dd5 microblaze: Do not setup BIP in _debug_exception
BIP is already setup.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:50 +02:00
Michal Simek 06b2864038 microblaze: Simplify _debug_exception function
Keep together all arguments for send_sig function.
Move returning address to delay slot which is executed.
Remove additional send_sig loading. I am using IMM part of
rtbd instruction with r0.

old solution:
addik r11, r0, send_sig
rtbd r11, 0
nop

new solution:
rtbd r0, send_sig
nop

There is one instruction saving.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:48 +02:00
Michal Simek 8b110d157c microblaze: Optimize SAVE_STATE macro
It is necessary to setup BIP and EE and clear EIP
only for unaligned exception handler. The rest of
hw exception handlers don't require it.
HW exception occured and we are not in virtual mode.
That's why we can do operations protected by EIP.
Interrupt, next hw exception or syscall can't occur.

EIP is cleared by rted.

This change speedup page_fault hw exception handler
which is critical path.

There is also necessary to save R11 content before
flag setup for unaligned exception.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:48 +02:00
Michal Simek b9ea77e2d3 microblaze: trivial: Use la insted of addik
la is translated to addik by toolchain.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:47 +02:00
Michal Simek be304350dd microblaze: remove enable_irq from SAVE_STATE macro
SAVE_STATE macro is used in hw exceptions high level handling
functions. Hw exception doesn't disable IRQ that's why we don't
need to reenable it.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:46 +02:00
Michal Simek 63708f635c microblaze: Move stack backup to SAVE_STATE macro
Remove code duplicity and move it to SAVE_STATE macro.
There is no impact on performance.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:45 +02:00
Michal Simek 96014cc39b microblaze: Move BIP setup to the end of ret_from_trap/ret_from_exc
We don't need to protect by BIP whole ret_from_trap/ret_from_exc code.
Only restoring from user/hw exception should be covered.
If BIP is setup, IRQ can't occur.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:45 +02:00
Michal Simek 5c0d72b1b3 microblaze: Remove PER_CPU(KM) variable
There is a way howto remove Kernel Mode variable. It is easier
to parse UMS bit in MSR to find out if I come from kernel or user
space. Loading MSR content should be in one cycle and loading
PER_CPU variable depends on memory state.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:44 +02:00
Michal Simek 3fbd93e58e microblaze: Optimize clear_vms_ums macro
We can save two instruction when MSR_VMS and MSR_UMS
are setup in one instruction.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:43 +02:00
Michal Simek 36f6095419 microblaze: Save and restore r3/r4 in SAVE/RESTORE_REGS macros
Save and restore R3/R4 registers in macros. This change
help to cleanup entry.S.

In ret_from_trap function we are saving returning value from
syscall to pt_regs on stack that's why we don't need to save and
restore these values before kernel functions (schedule, do_signal).

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:42 +02:00
Michal Simek a4a94dbf20 microblaze: Fix VM_ON and VM_OFF macros
Jump behind macro. We don't want to execute nop instruction again.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:42 +02:00
Michal Simek ca28b51016 microblaze: Do not use _start in vmlinux
_start symbol stores physical address where kernel is.
Gdb uses this symbol for their purpose that's why
we have to rename it.

Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-08-04 10:22:41 +02:00