Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This was entirely automated, using the script by Al:
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)
to do the replacement at the end of the merge window.
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
By checking the effective credentials instead of the real UID / permitted
capabilities, ensure that the calling process actually intended to use its
credentials.
To ensure that all ptrace checks use the correct caller credentials (e.g.
in case out-of-tree code or newly added code omits the PTRACE_MODE_*CREDS
flag), use two new flags and require one of them to be set.
The problem was that when a privileged task had temporarily dropped its
privileges, e.g. by calling setreuid(0, user_uid), with the intent to
perform following syscalls with the credentials of a user, it still passed
ptrace access checks that the user would not be able to pass.
While an attacker should not be able to convince the privileged task to
perform a ptrace() syscall, this is a problem because the ptrace access
check is reused for things in procfs.
In particular, the following somewhat interesting procfs entries only rely
on ptrace access checks:
/proc/$pid/stat - uses the check for determining whether pointers
should be visible, useful for bypassing ASLR
/proc/$pid/maps - also useful for bypassing ASLR
/proc/$pid/cwd - useful for gaining access to restricted
directories that contain files with lax permissions, e.g. in
this scenario:
lrwxrwxrwx root root /proc/13020/cwd -> /root/foobar
drwx------ root root /root
drwxr-xr-x root root /root/foobar
-rw-r--r-- root root /root/foobar/secret
Therefore, on a system where a root-owned mode 6755 binary changes its
effective credentials as described and then dumps a user-specified file,
this could be used by an attacker to reveal the memory layout of root's
processes or reveal the contents of files he is not allowed to access
(through /proc/$pid/cwd).
[akpm@linux-foundation.org: fix warning]
Signed-off-by: Jann Horn <jann@thejh.net>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: "Serge E. Hallyn" <serge.hallyn@ubuntu.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We have two APIs for compatiblity timespec/val, with confusingly
similar names. compat_(get|put)_time(val|spec) *do* handle the case
where COMPAT_USE_64BIT_TIME is set, whereas
(get|put)_compat_time(val|spec) do not. This is an accident waiting
to happen.
Clean it up by favoring the full-service version; the limited version
is replaced with double-underscore versions static to kernel/compat.c.
A common pattern is to convert a struct timespec to kernel format in
an allocation on the user stack. Unfortunately it is open-coded in
several places. Since this allocation isn't actually needed if
COMPAT_USE_64BIT_TIME is true (since user format == kernel format)
encapsulate that whole pattern into the function
compat_convert_timespec(). An equivalent function should be written
for struct timeval if it is needed in the future.
Finally, get rid of compat_(get|put)_timeval_convert(): each was only
used once, and the latter was not even doing what the function said
(no conversion actually was being done.) Moving the conversion into
compat_sys_settimeofday() itself makes the code much more similar to
sys_settimeofday() itself.
v3: Remove unused compat_convert_timeval().
v2: Drop bogus "const" in the destination argument for
compat_convert_time*().
Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Mateusz Guzik <mguzik@redhat.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Davidlohr Bueso <davidlohr@hp.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Tested-by: H.J. Lu <hjl.tools@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Pull signal handling cleanups from Al Viro:
"This is the first pile; another one will come a bit later and will
contain SYSCALL_DEFINE-related patches.
- a bunch of signal-related syscalls (both native and compat)
unified.
- a bunch of compat syscalls switched to COMPAT_SYSCALL_DEFINE
(fixing several potential problems with missing argument
validation, while we are at it)
- a lot of now-pointless wrappers killed
- a couple of architectures (cris and hexagon) forgot to save
altstack settings into sigframe, even though they used the
(uninitialized) values in sigreturn; fixed.
- microblaze fixes for delivery of multiple signals arriving at once
- saner set of helpers for signal delivery introduced, several
architectures switched to using those."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: (143 commits)
x86: convert to ksignal
sparc: convert to ksignal
arm: switch to struct ksignal * passing
alpha: pass k_sigaction and siginfo_t using ksignal pointer
burying unused conditionals
make do_sigaltstack() static
arm64: switch to generic old sigaction() (compat-only)
arm64: switch to generic compat rt_sigaction()
arm64: switch compat to generic old sigsuspend
arm64: switch to generic compat rt_sigqueueinfo()
arm64: switch to generic compat rt_sigpending()
arm64: switch to generic compat rt_sigprocmask()
arm64: switch to generic sigaltstack
sparc: switch to generic old sigsuspend
sparc: COMPAT_SYSCALL_DEFINE does all sign-extension as well as SYSCALL_DEFINE
sparc: kill sign-extending wrappers for native syscalls
kill sparc32_open()
sparc: switch to use of generic old sigaction
sparc: switch sys_compat_rt_sigaction() to COMPAT_SYSCALL_DEFINE
mips: switch to generic sys_fork() and sys_clone()
...
Notify get_robust_list users that the syscall is going away.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Darren Hart <dvhart@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Serge E. Hallyn <serge.hallyn@canonical.com>
Cc: kernel-hardening@lists.openwall.com
Cc: spender@grsecurity.net
Link: http://lkml.kernel.org/r/20120323190855.GA27213@www.outflux.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
It was possible to extract the robust list head address from a setuid
process if it had used set_robust_list(), allowing an ASLR info leak. This
changes the permission checks to be the same as those used for similar
info that comes out of /proc.
Running a setuid program that uses robust futexes would have had:
cred->euid != pcred->euid
cred->euid == pcred->uid
so the old permissions check would allow it. I'm not aware of any setuid
programs that use robust futexes, so this is just a preventative measure.
(This patch is based on changes from grsecurity.)
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Darren Hart <dvhart@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Serge E. Hallyn <serge.hallyn@canonical.com>
Cc: kernel-hardening@lists.openwall.com
Cc: spender@grsecurity.net
Link: http://lkml.kernel.org/r/20120319231253.GA20893@www.outflux.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
CAP_IPC_OWNER and CAP_IPC_LOCK can be checked against current_user_ns(),
because the resource comes from current's own ipc namespace.
setuid/setgid are to uids in own namespace, so again checks can be against
current_user_ns().
Changelog:
Jan 11: Use task_ns_capable() in place of sched_capable().
Jan 11: Use nsown_capable() as suggested by Bastian Blank.
Jan 11: Clarify (hopefully) some logic in futex and sched.c
Feb 15: use ns_capable for ipc, not nsown_capable
Feb 23: let copy_ipcs handle setting ipc_ns->user_ns
Feb 23: pass ns down rather than taking it from current
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Daniel Lezcano <daniel.lezcano@free.fr>
Acked-by: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 1dcc41bb (futex: Change 3rd arg of fetch_robust_entry()
to unsigned int*) some gcc versions decided to emit the following
warning:
kernel/futex.c: In function ‘exit_robust_list’:
kernel/futex.c:2492: warning: ‘next_pi’ may be used uninitialized in this function
The commit did not introduce the warning as gcc should have warned
before that commit as well. It's just gcc being silly.
The code path really can't result in next_pi being unitialized (or
should not), but let's keep the build clean. Annotate next_pi as an
uninitialized_var.
[ tglx: Addressed the same issue in futex_compat.c and massaged the
changelog ]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Tested-by: Matt Fleming <matt@console-pimps.org>
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
LKML-Reference: <1288897200-13008-1-git-send-email-dvhart@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Sparse complains:
kernel/futex.c:2495:59: warning: incorrect type in argument 3 (different signedness)
Make 3rd argument of fetch_robust_entry() 'unsigned int'.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Darren Hart <dvhltc@us.ibm.com>
LKML-Reference: <1284468228-8723-1-git-send-email-namhyung@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
find_task_by_vpid() in compat_sys_get_robust_list() does not require
tasklist_lock. It can be protected with rcu_read_lock as done in
sys_get_robust_list() already.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Darren Hart <dvhltc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Need to add the REQUEUE_PI checks to the compat_sys_futex API
as well to ensure 32 bit requeue's work fine on a 64 bit
system. Patch is against latest tip
Signed-off-by: Dinakar Guniguntala <dino@in.ibm.com>
Cc: Darren Hart <dvhltc@us.ibm.com>
LKML-Reference: <20090810130142.GA23619@in.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Use RCU to access another task's creds and to release a task's own creds.
This means that it will be possible for the credentials of a task to be
replaced without another task (a) requiring a full lock to read them, and (b)
seeing deallocated memory.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Separate the task security context from task_struct. At this point, the
security data is temporarily embedded in the task_struct with two pointers
pointing to it.
Note that the Alpha arch is altered as it refers to (E)UID and (E)GID in
entry.S via asm-offsets.
With comment fixes Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Wrap access to task credentials so that they can be separated more easily from
the task_struct during the introduction of COW creds.
Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id().
Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more
sense to use RCU directly rather than a convenient wrapper; these will be
addressed by later patches.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-audit@redhat.com
Cc: containers@lists.linux-foundation.org
Cc: linux-mm@kvack.org
Signed-off-by: James Morris <jmorris@namei.org>
Not all architectures implement futex_atomic_cmpxchg_inatomic(). The default
implementation returns -ENOSYS, which is currently not handled inside of the
futex guts.
Futex PI calls and robust list exits with a held futex result in an endless
loop in the futex code on architectures which have no support.
Fixing up every place where futex_atomic_cmpxchg_inatomic() is called would
add a fair amount of extra if/else constructs to the already complex code. It
is also not possible to disable the robust feature before user space tries to
register robust lists.
Compile time disabling is not a good idea either, as there are already
architectures with runtime detection of futex_atomic_cmpxchg_inatomic support.
Detect the functionality at runtime instead by calling
cmpxchg_futex_value_locked() with a NULL pointer from the futex initialization
code. This is guaranteed to fail, but the call of
futex_atomic_cmpxchg_inatomic() happens with pagefaults disabled.
On architectures, which use the asm-generic implementation or have a runtime
CPU feature detection, a -ENOSYS return value disables the PI/robust features.
On architectures with a working implementation the call returns -EFAULT and
the PI/robust features are enabled.
The relevant syscalls return -ENOSYS and the robust list exit code is blocked,
when the detection fails.
Fixes http://lkml.org/lkml/2008/2/11/149
Originally reported by: Lennart Buytenhek
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Cc: Riku Voipio <riku.voipio@movial.fi>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Various user space callers ask for relative timeouts. While we fixed
that overflow issue in hrtimer_start(), the sites which convert
relative user space values to absolute timeouts themself were uncovered.
Instead of putting overflow checks into each place add a function
which does the sanity checking and convert all affected callers to use
it.
Thanks to Frans Pop, who reported the problem and tested the fixes.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Frans Pop <elendil@planet.nl>
To allow the implementation of optimized rw-locks in user space, glibc
needs a possibility to select waiters for wakeup depending on a bitset
mask.
This requires two new futex OPs: FUTEX_WAIT_BITS and FUTEX_WAKE_BITS
These OPs are basically the same as FUTEX_WAIT and FUTEX_WAKE plus an
additional argument - a bitset. Further the FUTEX_WAIT_BITS OP is
expecting an absolute timeout value instead of the relative one, which
is used for the FUTEX_WAIT OP.
FUTEX_WAIT_BITS calls into the kernel with a bitset. The bitset is
stored in the futex_q structure, which is used to enqueue the waiter
into the hashed futex waitqueue.
FUTEX_WAKE_BITS also calls into the kernel with a bitset. The wakeup
function logically ANDs the bitset with the bitset stored in each
waiters futex_q structure. If the result is zero (i.e. none of the set
bits in the bitsets is matching), then the waiter is not woken up. If
the result is not zero (i.e. one of the set bits in the bitsets is
matching), then the waiter is woken.
The bitset provided by the caller must be non zero. In case the
provided bitset is zero the kernel returns EINVAL.
Internaly the new OPs are only extensions to the existing FUTEX_WAIT
and FUTEX_WAKE functions. The existing OPs hand a bitset with all bits
set into the futex_wait() and futex_wake() functions.
Signed-off-by: Thomas Gleixner <tgxl@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
compat_exit_robust_list() computes a pointer to the
futex entry in userspace as follows:
(void __user *)entry + futex_offset
'entry' is a 'struct robust_list __user *', and
'futex_offset' is a 'compat_long_t' (typically a 's32').
Things explode if the 32-bit sign bit is set in futex_offset.
Type promotion sign extends futex_offset to a 64-bit value before
adding it to 'entry'.
This triggered a problem on sparc64 running 32-bit applications which
would lock up a cpu looping forever in the fault handling for the
userspace load in handle_futex_death().
Compat userspace runs with address masking (wherein the cpu zeros out
the top 32-bits of every effective address given to a memory operation
instruction) so the sparc64 fault handler accounts for this by
zero'ing out the top 32-bits of the fault address too.
Since the kernel properly uses the compat_uptr interfaces, kernel side
accesses to compat userspace work too since they will only use
addresses with the top 32-bit clear.
Because of this compat futex layer bug we get into the following loop
when executing the get_user() load near the top of handle_futex_death():
1) load from address '0xfffffffff7f16bd8', FAULT
2) fault handler clears upper 32-bits, processes fault
for address '0xf7f16bd8' which succeeds
3) goto #1
I want to thank Bernd Zeimetz, Josip Rodin, and Fabio Massimo Di Nitto
for their tireless efforts helping me track down this bug.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The find_task_by_something is a set of macros are used to find task by pid
depending on what kind of pid is proposed - global or virtual one. All of
them are wrappers above the most generic one - find_task_by_pid_type_ns() -
and just substitute some args for it.
It turned out, that dereferencing the current->nsproxy->pid_ns construction
and pushing one more argument on the stack inline cause kernel text size to
grow.
This patch moves all this stuff out-of-line into kernel/pid.c. Together
with the next patch it saves a bit less than 400 bytes from the .text
section.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Paul Menage <menage@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the largest patch in the set. Make all (I hope) the places where
the pid is shown to or get from user operate on the virtual pids.
The idea is:
- all in-kernel data structures must store either struct pid itself
or the pid's global nr, obtained with pid_nr() call;
- when seeking the task from kernel code with the stored id one
should use find_task_by_pid() call that works with global pids;
- when showing pid's numerical value to the user the virtual one
should be used, but however when one shows task's pid outside this
task's namespace the global one is to be used;
- when getting the pid from userspace one need to consider this as
the virtual one and use appropriate task/pid-searching functions.
[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: nuther build fix]
[akpm@linux-foundation.org: yet nuther build fix]
[akpm@linux-foundation.org: remove unneeded casts]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org>
Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Paul Menage <menage@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Calling handle_futex_death in exit_robust_list for the different robust
mutexes of a thread basically frees the mutex. Another thread might grab
the lock immediately which updates the next pointer of the mutex.
fetch_robust_entry over the next pointer might therefore branch into the
robust mutex list of a different thread. This can cause two problems: 1)
some mutexes held by the dead thread are not getting freed and 2) some
mutexs held by a different thread are freed.
The next point need to be read before calling handle_futex_death.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The futex list traversal on the compat side appears to have
a bug.
It's loop termination condition compares:
while (compat_ptr(uentry) != &head->list)
But that can't be right because "uentry" has the special
"pi" indicator bit still potentially set at bit 0. This
is cleared by fetch_robust_entry() into the "entry"
return value.
What this seems to mean is that the list won't terminate
when list iteration gets back to the the head. And we'll
also process the list head like a normal entry, which could
cause all kinds of problems.
So we should check for equality with "entry". That pointer
is of the non-compat type so we have to do a little casting
to keep the compiler and sparse happy.
The same problem can in theory occur with the 'pending'
variable, although that has not been reported from users
so far.
Based on the original patch from David Miller.
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit d0aa7a70bf.
It not only introduced user space visible changes to the futex syscall,
it is also non-functional and there is no way to fix it proper before
the 2.6.22 release.
The breakage report ( http://lkml.org/lkml/2007/5/12/17 ) went
unanswered, and unfortunately it turned out that the concept is not
feasible at all. It violates the rtmutex semantics badly by introducing
a virtual owner, which hacks around the coupling of the user-space
pi_futex and the kernel internal rt_mutex representation.
At the moment the only safe option is to remove it fully as it contains
user-space visible changes to broken kernel code, which we do not want
to expose in the 2.6.22 release.
The patch reverts the original patch mostly 1:1, but contains a couple
of trivial manual cleanups which were necessary due to patches, which
touched the same area of code later.
Verified against the glibc tests and my own PI futex tests.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Ulrich Drepper <drepper@redhat.com>
Cc: Pierre Peiffer <pierre.peiffer@bull.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the private futex support was added the compat code wasn't changed.
The result is that code using compat code which fail, e.g., because the
timeout values are not correctly passed. The following patch should fix
that.
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch provides the futex_requeue_pi functionality, which allows some
threads waiting on a normal futex to be requeued on the wait-queue of a
PI-futex.
This provides an optimization, already used for (normal) futexes, to be used
with the PI-futexes.
This optimization is currently used by the glibc in pthread_broadcast, when
using "normal" mutexes. With futex_requeue_pi, it can be used with
PRIO_INHERIT mutexes too.
Signed-off-by: Pierre Peiffer <pierre.peiffer@bull.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch modifies futex_wait() to use an hrtimer + schedule() in place of
schedule_timeout().
schedule_timeout() is tick based, therefore the timeout granularity is the
tick (1 ms, 4 ms or 10 ms depending on HZ). By using a high resolution timer
for timeout wakeup, we can attain a much finer timeout granularity (in the
microsecond range). This parallels what is already done for futex_lock_pi().
The timeout passed to the syscall is no longer converted to jiffies and is
therefore passed to do_futex() and futex_wait() as an absolute ktime_t
therefore keeping nanosecond resolution.
Also this removes the need to pass the nanoseconds timeout part to
futex_lock_pi() in val2.
In futex_wait(), if there is no timeout then a regular schedule() is
performed. Otherwise, an hrtimer is fired before schedule() is called.
[akpm@linux-foundation.org: fix `make headers_check']
Signed-off-by: Sebastien Dugue <sebastien.dugue@bull.net>
Signed-off-by: Pierre Peiffer <pierre.peiffer@bull.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The recent fixups in futex.c need to be applied to futex_compat.c too. Fixes
a hang reported by Olaf.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix robust PI-futexes to be properly unlocked on unexpected exit.
For this to work the kernel has to know whether a futex is a PI or a
non-PI one, because the semantics are different. Since the space in
relevant glibc data structures is extremely scarce, the best solution is
to encode the 'PI' information in bit 0 of the robust list pointer.
Existing (non-PI) glibc robust futexes have this bit always zero, so the
ABI is kept. New glibc with PI-robust-futexes will set this bit.
Further fixes from Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This adds the actual pi-futex implementation, based on rt-mutexes.
[dino@in.ibm.com: fix an oops-causing race]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Dinakar Guniguntala <dino@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We are pleased to announce "lightweight userspace priority inheritance" (PI)
support for futexes. The following patchset and glibc patch implements it,
ontop of the robust-futexes patchset which is included in 2.6.16-mm1.
We are calling it lightweight for 3 reasons:
- in the user-space fastpath a PI-enabled futex involves no kernel work
(or any other PI complexity) at all. No registration, no extra kernel
calls - just pure fast atomic ops in userspace.
- in the slowpath (in the lock-contention case), the system call and
scheduling pattern is in fact better than that of normal futexes, due to
the 'integrated' nature of FUTEX_LOCK_PI. [more about that further down]
- the in-kernel PI implementation is streamlined around the mutex
abstraction, with strict rules that keep the implementation relatively
simple: only a single owner may own a lock (i.e. no read-write lock
support), only the owner may unlock a lock, no recursive locking, etc.
Priority Inheritance - why, oh why???
-------------------------------------
Many of you heard the horror stories about the evil PI code circling Linux for
years, which makes no real sense at all and is only used by buggy applications
and which has horrible overhead. Some of you have dreaded this very moment,
when someone actually submits working PI code ;-)
So why would we like to see PI support for futexes?
We'd like to see it done purely for technological reasons. We dont think it's
a buggy concept, we think it's useful functionality to offer to applications,
which functionality cannot be achieved in other ways. We also think it's the
right thing to do, and we think we've got the right arguments and the right
numbers to prove that. We also believe that we can address all the
counter-arguments as well. For these reasons (and the reasons outlined below)
we are submitting this patch-set for upstream kernel inclusion.
What are the benefits of PI?
The short reply:
----------------
User-space PI helps achieving/improving determinism for user-space
applications. In the best-case, it can help achieve determinism and
well-bound latencies. Even in the worst-case, PI will improve the statistical
distribution of locking related application delays.
The longer reply:
-----------------
Firstly, sharing locks between multiple tasks is a common programming
technique that often cannot be replaced with lockless algorithms. As we can
see it in the kernel [which is a quite complex program in itself], lockless
structures are rather the exception than the norm - the current ratio of
lockless vs. locky code for shared data structures is somewhere between 1:10
and 1:100. Lockless is hard, and the complexity of lockless algorithms often
endangers to ability to do robust reviews of said code. I.e. critical RT
apps often choose lock structures to protect critical data structures, instead
of lockless algorithms. Furthermore, there are cases (like shared hardware,
or other resource limits) where lockless access is mathematically impossible.
Media players (such as Jack) are an example of reasonable application design
with multiple tasks (with multiple priority levels) sharing short-held locks:
for example, a highprio audio playback thread is combined with medium-prio
construct-audio-data threads and low-prio display-colory-stuff threads. Add
video and decoding to the mix and we've got even more priority levels.
So once we accept that synchronization objects (locks) are an unavoidable fact
of life, and once we accept that multi-task userspace apps have a very fair
expectation of being able to use locks, we've got to think about how to offer
the option of a deterministic locking implementation to user-space.
Most of the technical counter-arguments against doing priority inheritance
only apply to kernel-space locks. But user-space locks are different, there
we cannot disable interrupts or make the task non-preemptible in a critical
section, so the 'use spinlocks' argument does not apply (user-space spinlocks
have the same priority inversion problems as other user-space locking
constructs). Fact is, pretty much the only technique that currently enables
good determinism for userspace locks (such as futex-based pthread mutexes) is
priority inheritance:
Currently (without PI), if a high-prio and a low-prio task shares a lock [this
is a quite common scenario for most non-trivial RT applications], even if all
critical sections are coded carefully to be deterministic (i.e. all critical
sections are short in duration and only execute a limited number of
instructions), the kernel cannot guarantee any deterministic execution of the
high-prio task: any medium-priority task could preempt the low-prio task while
it holds the shared lock and executes the critical section, and could delay it
indefinitely.
Implementation:
---------------
As mentioned before, the userspace fastpath of PI-enabled pthread mutexes
involves no kernel work at all - they behave quite similarly to normal
futex-based locks: a 0 value means unlocked, and a value==TID means locked.
(This is the same method as used by list-based robust futexes.) Userspace uses
atomic ops to lock/unlock these mutexes without entering the kernel.
To handle the slowpath, we have added two new futex ops:
FUTEX_LOCK_PI
FUTEX_UNLOCK_PI
If the lock-acquire fastpath fails, [i.e. an atomic transition from 0 to TID
fails], then FUTEX_LOCK_PI is called. The kernel does all the remaining work:
if there is no futex-queue attached to the futex address yet then the code
looks up the task that owns the futex [it has put its own TID into the futex
value], and attaches a 'PI state' structure to the futex-queue. The pi_state
includes an rt-mutex, which is a PI-aware, kernel-based synchronization
object. The 'other' task is made the owner of the rt-mutex, and the
FUTEX_WAITERS bit is atomically set in the futex value. Then this task tries
to lock the rt-mutex, on which it blocks. Once it returns, it has the mutex
acquired, and it sets the futex value to its own TID and returns. Userspace
has no other work to perform - it now owns the lock, and futex value contains
FUTEX_WAITERS|TID.
If the unlock side fastpath succeeds, [i.e. userspace manages to do a TID ->
0 atomic transition of the futex value], then no kernel work is triggered.
If the unlock fastpath fails (because the FUTEX_WAITERS bit is set), then
FUTEX_UNLOCK_PI is called, and the kernel unlocks the futex on the behalf of
userspace - and it also unlocks the attached pi_state->rt_mutex and thus wakes
up any potential waiters.
Note that under this approach, contrary to other PI-futex approaches, there is
no prior 'registration' of a PI-futex. [which is not quite possible anyway,
due to existing ABI properties of pthread mutexes.]
Also, under this scheme, 'robustness' and 'PI' are two orthogonal properties
of futexes, and all four combinations are possible: futex, robust-futex,
PI-futex, robust+PI-futex.
glibc support:
--------------
Ulrich Drepper and Jakub Jelinek have written glibc support for PI-futexes
(and robust futexes), enabling robust and PI (PTHREAD_PRIO_INHERIT) POSIX
mutexes. (PTHREAD_PRIO_PROTECT support will be added later on too, no
additional kernel changes are needed for that). [NOTE: The glibc patch is
obviously inofficial and unsupported without matching upstream kernel
functionality.]
the patch-queue and the glibc patch can also be downloaded from:
http://redhat.com/~mingo/PI-futex-patches/
Many thanks go to the people who helped us create this kernel feature: Steven
Rostedt, Esben Nielsen, Benedikt Spranger, Daniel Walker, John Cooper, Arjan
van de Ven, Oleg Nesterov and others. Credits for related prior projects goes
to Dirk Grambow, Inaky Perez-Gonzalez, Bill Huey and many others.
Clean up the futex code, before adding more features to it:
- use u32 as the futex field type - that's the ABI
- use __user and pointers to u32 instead of unsigned long
- code style / comment style cleanups
- rename hash-bucket name from 'bh' to 'hb'.
I checked the pre and post futex.o object files to make sure this
patch has no code effects.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The futex timeval is not checked for correctness. The change does not
break existing applications as the timeval is supplied by glibc (and glibc
always passes a correct value), but the glibc-internal tests for this
functionality fail.
Signed-off-by: Thomas Gleixner <tglx@tglx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
kernel/futex_compat.c: In function `compat_sys_futex':
kernel/futex_compat.c:140: warning: passing arg 1 of `do_futex' makes integer from pointer without a cast
kernel/futex_compat.c:140: warning: passing arg 5 of `do_futex' makes integer from pointer without a cast
Not sure what Ingo was thinking of here. Put the casts back in.
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- fix: initialize the robust list(s) to NULL in copy_process.
- doc update
- cleanup: rename _inuser to _inatomic
- __user cleanups and other small cleanups
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
32-bit syscall compatibility support. (This patch also moves all futex
related compat functionality into kernel/futex_compat.c.)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Acked-by: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Greg Kroah-Hartman
Linus Torvalds
Jann Horn
H. Peter Anvin
Thomas Gleixner
Al Viro
Kees Cook
Serge E. Hallyn
Darren Hart
Namhyung Kim
Dinakar Guniguntala
David Howells
Al Viro
David Miller
Pavel Emelyanov
Martin Schwidefsky
Arnd Bergmann
Ulrich Drepper
Pierre Peiffer
Ingo Molnar
Andrew Morton