When the DRM driver for the meson platform was created, the bindings
required that the DMC register region was provided.
Through those DMC registers, the display driver could configure an IP
called "canvas", a video lookup table used by the display IP.
It was later discovered that "canvas" is actually an IP shared by other
components than display: video decoder, 2D engine.. and that it wasn't
possible to keep the canvas code in DRM.
Over the past few months, incremental efforts have been deployed to
create a standalone meson-canvas driver [1], and the DRM driver was
patched to optionally use it if present [2].
This is the final step of those efforts where we simply remove any
control over DMC that the meson DRM driver has.
Please note that this breaks compatibility with older DTs that only
provide the DMC register range but not the amlogic,canvas node.
[1] https://patchwork.kernel.org/cover/10573771/
[2] https://patchwork.freedesktop.org/series/52076/
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190311105144.7276-2-mjourdan@baylibre.com
Add two EDID vendor/product pairs used across a variety of
Sensics products, as well as the OSVR HDK and HDK 2.
Signed-off-by: Ryan Pavlik <ryan.pavlik@collabora.com>
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20181203164644.13974-1-ryan.pavlik@collabora.com
Cc: <stable@vger.kernel.org> # v4.15+
The new shmem helpers from Noralf and Rob abstract out a bunch of our
BO creation and mapping code.
v2: Use the new sgt getter, and flag pages as dirty before freeing.
v3: Remove the mismatched put_pages.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190314163451.13431-1-eric@anholt.net
Reviewed-by: Rob Herring <robh@kernel.org> (v2)
This adds a library for shmem backed GEM objects.
v8:
- export drm_gem_shmem_create_with_handle
- call mapping_set_gfp_mask to set default zone to GFP_HIGHUSER
- Add helper drm_gem_shmem_get_pages_sgt()
v7:
- Use write-combine for mmap instead. This is the more common
case. (robher)
v6:
- Fix uninitialized variable issue in an error path (anholt).
- Add a drm_gem_shmem_vm_open() to the fops to get proper refcounting
of the pages (anholt).
v5:
- Drop drm_gem_shmem_prime_mmap() (Daniel Vetter)
- drm_gem_shmem_mmap(): Subtract drm_vma_node_start() to get the real
vma->vm_pgoff
- drm_gem_shmem_fault(): Use vmf->pgoff now that vma->vm_pgoff is correct
v4:
- Drop cache modes (Thomas Hellstrom)
- Add a GEM attached vtable
v3:
- Grammar (Sam Ravnborg)
- s/drm_gem_shmem_put_pages_unlocked/drm_gem_shmem_put_pages_locked/
(Sam Ravnborg)
- Add debug output in error path (Sam Ravnborg)
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190313004344.24169-1-robh@kernel.org
Current driver sets the tile property only for DP MST connectors.
However there are some tiled displays where each SST connector
carries a single tile. So we need to attach this property object
for every connector and set it for every connector (DP SST and MST).
Plus since the tile information is obtained as a result of EDID
parsing, the best place to update tile property is where we update
edid property.
Also now we dont need to explicitly set this now for MST connectors.
This has been tested with xrandr --props and modetest and verified
that TILE property is exposed correctly.
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190313021722.10068-1-manasi.d.navare@intel.com
Also stop calling drm_sched_increase_karma multiple times.
v2: Fix whitespace in the code we're moving (by anholt)
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1552409822-17230-1-git-send-email-andrey.grodzovsky@amd.com
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Fixes: 222b5f0441 ("drm/sched: Refactor ring mirror list handling.")
Now that we have the reservation object in the GEM object, it's easy
to provide a helper for this common case. Noticed while reviewing
panfrost and lima drivers. This particular version came out of v3d,
which in turn was a copy from vc4.
v2: Fix kerneldoc warnings.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308161716.2466-2-eric@anholt.net
Acked-by: Rob Herring <robh@kernel.org> (v1)
64 bpp half float formats are supported on hdr planes only and are subject
to the following restrictions:
* 90/270 rotation not supported
* Yf Tiling not supported
* Frame Buffer Compression not supported
* Color Keying not supported
v2:
- Drop handling pixel normalize register
- Don't use icl_is_hdr_plane too early
v3:
- Use refactored icl_is_hdr_plane (Ville)
- Use u32 instead of uint32_t (Ville)
v6:
- Rebase and fix merge conflicts
- Reorganize switch statements to keep RGB grouped separately from YUV
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Kevin Strasser <kevin.strasser@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1552437513-22648-4-git-send-email-kevin.strasser@intel.com
Change the api in order to enable callers that can't supply a valid
intel_plane pointer, as would be the case prior to calling
drm_universal_plane_init.
v4:
- Rename variables and move a declaration (Ville)
v6:
- Rebase and fix merge conflict
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Kevin Strasser <kevin.strasser@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1552437513-22648-3-git-send-email-kevin.strasser@intel.com
Add 64 bpp 16:16:16:16 half float pixel formats. Each 16 bit component is
formatted in IEEE-754 half-precision float (binary16) 1:5:10
MSb-sign:exponent:fraction form.
This patch attempts to address the feedback provided when 2 of these
formats were previosly proposed:
https://patchwork.kernel.org/patch/10072545/
v2:
- Fixed cpp (Ville)
- Added detail pixel formatting (Ville)
- Ordered formats in header (Ville)
v5:
- .depth should be 0 for new formats (Maarten)
Cc: Tina Zhang <tina.zhang@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Kevin Strasser <kevin.strasser@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1552437513-22648-2-git-send-email-kevin.strasser@intel.com
The list of modifiers to be supported for each plane has been dynamically generated
from 'malidp_format_modifiers[]' and 'malidp_hw_regmap->features'.
Changes from v1:-
1. Replaced DRM_ERROR() with DRM_DEBUG_KMS() in malidp_format_mod_supported()
to report unsupported modifiers.
Changes from v2:-
1. Removed malidp_format_mod_supported() from the current patch. This has been added
in "PATCH 7/12"
2. Dynamically generate the list of modifiers (to be supported for each plane) from
'malidp_format_modifiers' and features.
Changes since v3 (series):
- Added the ack
- Rebased on the latest drm-misc-next
Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://patchwork.freedesktop.org/patch/291767/?series=57895&rev=1
Considering the fact that some of the AFBC specific pixel formats are expressed
in bits per pixel (ie bpp which is not byte aligned), the pitch (ie width * bpp)
is not guaranteed to be aligned to burst size (ie 8 or 16 bytes).
For example, DRM_FORMAT_VUY101010 is 30 bits per pixel. For a framebuffer of
width 32 pixels, the pitch will be 120 bytes which is not aligned to burst size
(ie 16 bytes) for DP650.
Changes since v3 (series):
- Added the ack
- Rebased on the latest drm-misc-next
Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://patchwork.freedesktop.org/patch/291764/?series=57895&rev=1
Formats like DRM_FORMAT_VUY101010, DRM_FORMAT_YUV420_8BIT and
DRM_FORMAT_YUV420_10BIT are expressed in bits per pixel as they have a non
integer value of cpp (thus denoted as '0' in drm_format_info[]). Therefore,
the calculation of AFBC framebuffer size needs to use malidp_format_get_bpp().
Changes since v3 (series):
- Added the ack
- Rebased on the latest drm-misc-next
Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://patchwork.freedesktop.org/patch/291766/?series=57895&rev=1
In malidp, the writeback pipeline does not support writing crtc output
to a framebuffer with modifiers ie the memory writeback content is
devoid of any compression or tiling, etc.
So we have added a commit check in memory writeback encoder helper function
to validate if the framebuffer has any modifier and if so, return EINVAL.
Changes since v3 (series):
- Added the ack
- Rebased on the latest drm-misc-next
Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://patchwork.freedesktop.org/patch/291765/?series=57895&rev=1
The newly supported AFBC YUV formats have the following rotation memory
constraints (in DP550/DP650).
1. DRM_FORMAT_VUY888/DRM_FORMAT_VUY101010 :- It can rotate upto 8
horizontal lines in the AFBC output buffer.
2. DRM_FORMAT_YUV420_8BIT :- It can rotate upto 16 horizontal lines
in the AFBC output buffer.
Also some of the pixel formats are specified in bits per pixel (rather
than bytes per pixel), so the calculation needs to take note of this.
Besides there are some difference between DP550 and DP650 and these are
as follows:-
1. DRM_FORMAT_X0L2 (in uncompressed format) does not support rotation in
DP550. For DP650, it can rotate upto 16 horizontal lines in the AFBC
output buffer, whereas in DP550 (with AFBC), it can rotate upto 8
horizontal lines.
2. DRM_FORMAT_YUV420_10BIT :- It can rotate upto 8 horizontal lines in
dp550 and 16 horizontal lines in DP650.
Changes since v3 (series):
- Added the ack
- Rebased on the latest drm-misc-next
Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://patchwork.freedesktop.org/patch/291763/?series=57895&rev=1
We need to define a common list of format modifiers supported by each of
the Mali display processors.
The following are the constraints with AFBC:-
1. AFBC is not supported for the formats defined in
malidp_hw_format_is_linear_only()
2. Some of the formats are supported only with AFBC modifiers. Thus we have
introduced a new function 'malidp_hw_format_is_afbc_only()' which verifies
the same.
3. AFBC_FORMAT_MOD_YTR needs to be provided for any RGB format.
4. Formats <= 16bpp cannot support AFBC_FORMAT_MOD_SPLIT.
5. CBR should not be set for non-subsampled formats.
6. SMART layer does not support framebuffer with AFBC modifiers.
Return -EINVAL for such a scenario.
7. AFBC_FORMAT_MOD_YTR is not supported for any YUV formats.
8. Formats which are subsampled cannot support AFBC_FORMAT_MOD_SPLIT.
However in DP550, YUV_420_10BIT is supported with AFBC_FORMAT_MOD_SPLIT.
This feature has been identified with
MALIDP_DEVICE_AFBC_YUV_420_10_SUPPORT_SPLIT.
9. In DP550 and DP650, for YUYV, the hardware supports different
format-ids to be used with and without AFBC modifier. We have used the
feature 'MALIDP_DEVICE_AFBC_YUYV_USE_422_P2' to identify this
characteristic.
10. DP500 does not support split mode (ie AFBC_FORMAT_MOD_SPLIT). We have
used the feature 'MALIDP_DEVICE_AFBC_SUPPORT_SPLIT' to identify the DPs
which support SPLIT mode.
11. DP550 supports YUV420 with split mode. We have defined the feature
'AFBC_SUPPORT_SPLIT_WITH_YUV_420_10' to identify this characteristic.
Changes since v1:-
- Merged https://patchwork.freedesktop.org/patch/265215/ into this patch
- As Liviu pointed out in the last patch, we can pull the checks outside
of the 'while (*modifiers != DRM_FORMAT_MOD_INVALID)' loop
- Rebased
Changes since v3 (series):
- Added the ack
- Rebased on the latest drm-misc-next
Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://patchwork.freedesktop.org/patch/291762/?series=57895&rev=1
We have added support for some AFBC only pixel formats like :-
DRM_FORMAT_YUV420_8BIT (single plane YUV 420 8 bit format)
DRM_FORMAT_VUY888 (single plane YUV 444 8 bit format)
DRM_FORMAT_VUY101010 (single plane YUV 444 10 bit format)
DRM_FORMAT_YUV420_10BIT (single plane YUV 420 10 bit format)
Generally, these formats are supported by our hardware using the same
hw-ids as the equivalent multi plane pixel formats.
Also we have added support for XYUV 444 8 and 10 bit formats
Changes since v3 (series):
- Added the ack
- Rebased on the latest drm-misc-next
Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://patchwork.freedesktop.org/patch/291761/?series=57895&rev=1
Added the AFBC decoder registers for DP500 , DP550 and DP650.
These registers control the processing of AFBC buffers. It controls various
features like AFBC decoder enable, lossless transformation and block split
as well as setting of the left, right, top and bottom cropping of AFBC
buffers (in number of pixels).
All the layers (except DE_SMART) support framebuffers with AFBC modifiers.
One needs to set the pixel values of the top, left, bottom and right
cropping for the AFBC framebuffer.
Cropping an AFBC framebuffer is controlled by the AFBC crop registers.
In that case, the layer input size registers should be configured with
framebuffer's dimensions and not with drm_plane_state source width/height
values (which is used for non AFBC framebuffer to denote cropping).
Changes from v1:
- Removed the "if (fb->modifier)" check from malidp_de_plane_update()
and added it in malidp_de_set_plane_afbc(). This will consolidate all the
AFBC specific register configurations in a single function ie
malidp_de_set_plane_afbc().
Changes from v2:
- For AFBC framebuffer, layer input size register should be set to
framebuffer's width and height.
Changes from v3:
- Rebased on top of latest drm-misc-next
- Some cleanups/sanity changes based on Liviu's comments
Changes from v3 (series):
- Added the ack
- Rebased on the latest drm-misc-next
Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://patchwork.freedesktop.org/patch/291760/?series=57895&rev=1
This new format is supported by DP550 and DP650
Changes since v3 (series):
- Added the ack
- Rebased on the latest drm-misc-next
Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://patchwork.freedesktop.org/patch/291758/?series=57895&rev=1
As we look to enable AFBC using DRM format modifiers, we run into
problems which we've historically handled via vendor-private details
(i.e. gralloc, on Android).
AFBC (as an encoding) is fully flexible, and for example YUV data can
be encoded into 1, 2 or 3 encoded "planes", much like the linear
equivalents. Component order is also meaningful, as AFBC doesn't
necessarily care about what each "channel" of the data it encodes
contains. Therefore ABGR8888 and RGBA8888 can be encoded in AFBC with
different representations. Similarly, 'X' components may be encoded
into AFBC streams in cases where a decoder expects to decode a 4th
component.
In addition, AFBC is a licensable IP, meaning that to support the
ecosystem we need to ensure that _all_ AFBC users are able to describe
the encodings that they need. This is much better achieved by
preserving meaning in the fourcc codes when they are combined with an
AFBC modifier.
In essence, we want to use the modifier to describe the parameters of
the AFBC encode/decode, and use the fourcc code to describe the data
being encoded/decoded.
To do anything different would be to introduce redundancy - we would
need to duplicate in the modifier information which is _already_
conveyed clearly and non-ambigiously by a fourcc code.
I hope that for RGB this is non-controversial.
(BGRA8888 + MODIFIER_AFBC) is a different format from
(RGBA8888 + MODIFIER_AFBC).
Possibly more controversial is that (XBGR8888 + MODIFIER_AFBC)
is different from (BGR888 + MODIFIER_AFBC). I understand that in some
schemes it is not the case - but in AFBC it is so.
Where we run into problems is where there are not already fourcc codes
which represent the data which the AFBC encoder/decoder is processing.
To that end, we want to introduce new fourcc codes to describe the
data being encoded/decoded, in the places where none of the existing
fourcc codes are applicable.
Where we don't support an equivalent non-compressed layout, or where
no "obvious" linear layout exists, we are proposing adding fourcc
codes which have no associated linear layout - because any layout we
proposed would be completely arbitrary.
Some formats are following the naming conventions from [2].
The summary of the new formats is:
DRM_FORMAT_VUY888 - Packed 8-bit YUV 444. Y followed by U then V.
DRM_FORMAT_VUY101010 - Packed 10-bit YUV 444. Y followed by U then
V. No defined linear encoding.
DRM_FORMAT_Y210 - Packed 10-bit YUV 422. Y followed by U (then Y)
then V. 10-bit samples in 16-bit words.
DRM_FORMAT_Y410 - Packed 10-bit YUV 444, with 2-bit alpha.
DRM_FORMAT_P210 - Semi-planar 10-bit YUV 422. Y plane, followed by
interleaved U-then-V plane. 10-bit samples in
16-bit words.
DRM_FORMAT_YUV420_8BIT - Packed 8-bit YUV 420. Y followed by U then
V. No defined linear encoding
DRM_FORMAT_YUV420_10BIT - Packed 10-bit YUV 420. Y followed by U
then V. No defined linear encoding
Please also note that in the absence of AFBC, we would still need to
add Y410, Y210 and P210.
Full rationale follows:
YUV 444 8-bit, 1-plane
----------------------
The currently defined AYUV format encodes a 4th alpha component,
which makes it unsuitable for representing a 3-component YUV 444
AFBC stream.
The proposed[1] XYUV format which is supported by Mali-DP in linear
layout is also unsuitable, because the component order is the
opposite of the AFBC version, and it encodes a 4th 'X' component.
DRM_FORMAT_VUY888 is the "obvious" format for a 3-component, packed,
YUV 444 8-bit format, with the component order which our HW expects to
encode/decode. It conforms to the same naming convention as the
existing packed YUV 444 format.
The naming here is meant to be consistent with DRM_FORMAT_AYUV and
DRM_FORMAT_XYUV[1]
YUV 444 10-bit, 1-plane
-----------------------
There is no currently-defined YUV 444 10-bit format in
drm_fourcc.h, irrespective of number of planes.
The proposed[1] XVYU2101010 format which is supported by Mali-DP in
linear layout uses the wrong component order, and also encodes a 4th
'X' component, which doesn't match the AFBC version of YUV 444
10-bit which we support.
DRM_FORMAT_Y410 is the same layout as XVYU2101010, but with 2 bits of
alpha. This format is supported with linear layout by Mali GPUs. The
naming follows[2].
There is no "obvious" linear encoding for a 3-component 10:10:10
packed format, and so DRM_FORMAT_VUY101010 defines a component
order, but not a bit encoding. Again, the naming is meant to be
consistent with DRM_FORMAT_AYUV.
YUV 422 8-bit, 1-plane
----------------------
The existing DRM_FORMAT_YUYV (and the other component orders) are
single-planar YUV 422 8-bit formats. Following the convention of
the component orders of the RGB formats, YUYV has the correct
component order for our AFBC encoding (Y followed by U followed by
V). We can use YUYV for AFBC YUV 422 8-bit.
YUV 422 10-bit, 1-plane
-----------------------
There is no currently-defined YUV 422 10-bit format in drm_fourcc.h
DRM_FORMAT_Y210 is analogous to YUYV, but with 10-bits per sample
packed into the upper 10-bits of 16-bit samples. This format is
supported in both linear and AFBC by Mali GPUs.
YUV 422 10-bit, 2-plane
-----------------------
The recently defined DRM_FORMAT_P010 format is a 10-bit semi-planar
YUV 420 format, which has the correct component ordering for an AFBC
2-plane YUV 420 buffer. The linear layout contains meaningless padding
bits, which will not be encoded in an AFBC stream.
YUV 420 8-bit, 1-plane
----------------------
There is no currently defined single-planar YUV 420, 8-bit format
in drm_fourcc.h. There's differing opinions on whether using the
existing fourcc-implied n_planes where possible is a good idea or
not when using modifiers.
For me, it's much more "obvious" to use NV12 for 2-plane AFBC and
YUV420 for 3-plane AFBC. This keeps the aforementioned separation
between the AFBC codec settings (in the modifier) and the pixel data
format (in the fourcc). With different vendors using AFBC, this helps
to ensure that there is no confusion in interoperation. It also
ensures that the AFBC modifiers describe AFBC itself (which is a
licensable component), and not implementation details which are not
defined by AFBC.
The proposed[1] X0L0 format which Mali-DP supports with Linear layout
is unsuitable, as it contains a 4th 'X' component, and our AFBC
decoder expects only 3 components.
To that end, we propose a new YUV 420 8-bit format. There is no
"obvious" linear encoding for a 3-component 8:8:8, 420, packed format,
and so DRM_FORMAT_YUV420_8BIT defines a component order, but not a
bit encoding. I'm happy to hear different naming suggestions.
YUV 420 8-bit, 2-, 3-plane
--------------------------
These already exist, we can use NV12 and YUV420.
YUV 420 10-bit, 1-plane
-----------------------
As above, no current definition exists, and X0L2 encodes a 4th 'X'
channel.
Analogous to DRM_FORMAT_YUV420_8BIT, we define DRM_FORMAT_YUV420_10BIT.
[1] https://lists.freedesktop.org/archives/dri-devel/2018-July/184598.html
[2] https://docs.microsoft.com/en-us/windows/desktop/medfound/10-bit-and-16-bit-yuv-video-formats
Changes since RFC v1:
- Fix confusing subsampling vs bit-depth X:X:X notation in
descriptions (danvet)
- Rename DRM_FORMAT_AVYU1101010 to DRM_FORMAT_Y410 (Lisa Wu)
- Add drm_format_info structures for the new formats, using the
new 'bpp' field for those with non-integer bytes-per-pixel
- Rebase, including Juha-Pekka Heikkila's format definitions
Changes since RFC v2:
- Rebase on top of latest changes in drm-misc-next
- Change the description of DRM_FORMAT_P210 in __drm_format_info and
drm_fourcc.h so as to make it consistent with other DRM_FORMAT_PXXX
formats.
Changes since v3:
- Added the ack
- Rebased on the latest drm-misc-next
Signed-off-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Ayan Kumar Halder <ayan.halder@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://patchwork.freedesktop.org/patch/291759/?series=57895&rev=1
The vboxvideo driver has been converted to the atomic modesetting API
and all FIXME and TODO items have been fixed, so it is time to move it out
of staging.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190304164724.10210-4-hdegoede@redhat.com
Refactor vbox_update_mode_hints to no longer use the obsolete
drm_modeset_lock_all() and switch it over to drm_connector_list_iter
instead of directly accessing the list using list_for_each_entry.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190304164724.10210-3-hdegoede@redhat.com
Drop the initial_mode_queried workaround for kms clients which do not
support hotplug, all kms clients should be able to deal with hotplug.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190304164724.10210-2-hdegoede@redhat.com
Found while grepping around.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190221155951.19855-1-daniel.vetter@ffwll.ch
The DRM_STM driver can be built independently of the framebuffer
layer, but it causes a Kconfig warning:
WARNING: unmet direct dependencies detected for FB_PROVIDE_GET_FB_UNMAPPED_AREA
Depends on [n]: HAS_IOMEM [=y] && FB [=n]
Selected by [y]:
- DRM_STM [=y] && HAS_IOMEM [=y] && DRM [=y] && (ARCH_STM32 [=n] || ARCH_MULTIPLATFORM [=y])
Selecting FB_PROVIDE_GET_FB_UNMAPPED_AREA actually has no effect
if CONFIG_FB is disabled, so we can make it a conditional 'select'
instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190307155323.2949975-1-arnd@arndb.de
No compatible string for it yet, just the version-dependent changes.
They've now tied the hub and the core interrupt lines into a single
interrupt line coming out of the block. It also turns out I made a
mistake in modeling the V3D v3.3 and v4.1 bridge as a part of V3D
itself -- the bridge is going away in favor of an external reset
controller in a larger HW module.
v2: Use consistent checks for whether we're on 4.2, and fix a leak in
an error path.
v3: Use more general means of determining if the current 4.2 changes
are in place, as apparently other platforms may switch back (noted
by Dave). Update the binding doc.
v4: Improve error handling for IRQ init.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308174336.7866-2-eric@anholt.net
Reviewed-by: Dave Emett <david.emett@broadcom.com>
The old field is gone and the register now has a different field,
QRMAXCNT for how many TMU requests get serviced before thread switch.
We were accidentally reducing it from its default of 0x3 (4 requests)
to 0x0 (1).
v2: Skip setting the reg at all on 4.x, instead of trying to update
only the old field.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190220233658.986-2-eric@anholt.net
Reviewed-by: Dave Emett <david.emett@broadcom.com>
-----BEGIN PGP SIGNATURE-----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=u0KV
-----END PGP SIGNATURE-----
Merge tag 'topic/hdr-formats-2019-03-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-misc-next
Add support for Y21x and Y41x to drm core and i915, and P01x support to i915.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f2485309-d645-bed4-95f4-e66ff312aa05@linux.intel.com
The current code, since commit bb43d40d7c ("drm/sun4i: rgb: Validate the
clock rate"), perform some validation on the pixel clock to filter out the
EDID modes provided by monitors (through bridges) that we wouldn't be able
to reach. For the usual modes, we're able to generate a perfect clock rate,
so a strict check was enough.
However, this had the side effect of preventing displays that would work
otherwise to operate properly, since we would pretty much never be able to
generate an exact rate for those displays, even though we would fall within
that panel tolerance.
This was also shown to happen for unusual modes exposed through EDIDs, for
example on eDP panels.
We can work around this by simplifying a bit the problem: no panels we've
encountered so far actually needed that check. All of them are tied to a
particular board when it is produced, and made to work with the Allwinner
BSP. That pretty much guarantees that we never have a pixel clock out of
reach.
On the other hand, the EDIDs modes that needed to be validated have always
been exposed through bridges.
Let's just use that metric to instead of validating all modes, only
validate modes when we have a bridge attached. It should be good enough for
now, while we still have room for improvements or refinements using the
display_timings structure for example for panels.
We also add a tolerance for EDID-based modes instead of doing a strict
check. This tolerance is of 0.5% which is the one advertised in the VESA
DVT and CVT specs. If that needed to be extended in the future, we can add
a custom module parameter to relax it a bit.
Fixes: bb43d40d7c ("drm/sun4i: rgb: Validate the clock rate")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com> # tested on pinebook
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ec2dc2a7b3d4bd44f7a2a6e1c1813f92449a7310.1551191081.git-series.maxime.ripard@bootlin.com
Our clock rate variables are getting pretty close to the LONG_MAX / ULONG_MAX
limit, especially since we will start doing arithmetic on it. Move those
types to unsigned long long to be sure we don't overflow their type.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com> # tested on pinebook
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/022c3b850413edd6afbca20062f100971de2f5af.1551191081.git-series.maxime.ripard@bootlin.com
The TCON driver used to need the panel pointer in order to configure the
tcon according to the various parameters of the panel. However, this has
evolved over time (especially to support bridges), and therefore the panel
pointer isn't needed anymore by the TCON driver.
Move that pointer to the LVDS and RGB encoders drivers.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Vasily Khoruzhick <anarsoul@gmail.com> # tested on pinebook
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/13288b6b8f27b614a6c9aef348923c34b2803ad4.1551191081.git-series.maxime.ripard@bootlin.com
The preferred bpp for the fbdev emulation buffer has been 32 so far, which
means that by default we will allocate an 8MB buffer with a 1920x1080
resolution.
Worse this memory will be allocated from the CMA pool, and will never be
freed even if we don't use the fbdev emulation. Therefore, reducing it is a
big deal, and switching to 16bpp by default will gain us around 4MB at
1920x1080, while keeping decent color depth. And users still have the
option to switch to 32bpp using the kernel command line.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190306140245.21973-1-maxime.ripard@bootlin.com
In order to test whether the load tracker is working as expected, we
need the ability to compare the commit result with the underrun
indication. With the load tracker always enabled, commits that are
expected to trigger an underrun are always rejected, so userspace
cannot get the actual underrun indication from the hardware.
Add a debugfs entry to disable/enable the load tracker, so that a DRM
commit expected to trigger an underrun can go through with the load
tracker disabled. The underrun indication is then available to
userspace and can be checked against the commit result with the load
tracker enabled.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190220155124.25022-4-paul.kocialkowski@bootlin.com
The HVS block is supposed to fill the pixelvalve FIFOs fast enough to
meet the requested framerate. The problem is, the HVS and memory bus
bandwidths are limited, and if we don't take these limitations into
account we might end up with HVS underflow errors.
This patch is trying to model the per-plane HVS and memory bus bandwidth
consumption and take a decision at atomic_check() time whether the
estimated load will fit in the HVS and membus budget.
Note that we take an extra margin on the memory bus consumption to let
the system run smoothly when other blocks are doing heavy use of the
memory bus. Same goes for the HVS limit, except the margin is smaller in
this case, since the HVS is not used by external components.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190220155124.25022-3-paul.kocialkowski@bootlin.com
Add a debugfs entry and helper for reporting HVS underrun errors as
well as helpers for masking and unmasking the underrun interrupts.
Add an IRQ handler and initial IRQ configuration.
Rework related register definitions to take the channel number.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190220155124.25022-2-paul.kocialkowski@bootlin.com
The DP 1.4 spec defines the SDP header and SDP contents for
a Picture Parameter Set (PPS) that must be sent in advance
of DSC transmission to define the encoding characteristics.
This was done in one struct, drm_dsc_pps_infoframe, which
conatined the SDP header and PPS. Because the PPS is
a property of DSC over any connector, not just DP, and because
drm drivers may have their own SDP structs they wish to use,
make the functions that initialise SDP and PPS headers take
the components they operate on, not drm_dsc_pps_infoframe,
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190221202001.28430-4-David.Francis@amd.com
Native 420 and 422 transfer modes are new in DSC1.2
In these modes, each two pixels of a slice are treated as one
pixel, so the slice width is half as large (round down) for
the purposes of calucating the groups per line and chunk size
in bytes
In native 422 mode, each pixel has four components, so the
mux component of a group is larger by one additional mux word
and one additional component
Now that there is native 422 support, the configuration option
previously called enable422 is renamed to simple_422 to avoid
confusion
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190221202001.28430-3-David.Francis@amd.com
The function intel_compute_rc_parameters is part of the dsc spec
and is not driver-specific. Other drm drivers might like to use
it. The function is not changed; just moved and renamed.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190221202001.28430-2-David.Francis@amd.com
Maxime Jourdan
Ryan Pavlik
Maxime Ripard
Eric Anholt
Noralf Trønnes
Manasi Navare
Andrey Grodzovsky
Sean Paul
Kieran Bingham
Kevin Strasser
Ayan Kumar Halder
Brian Starkey
Hans de Goede
Daniel Vetter
Arnd Bergmann
Qiang Yu
Paul Kocialkowski
Boris Brezillon
David Francis