The bit 13 and bit 14 of the IOMMU control register are
PPRLogEn and PPRIntEn. They are related to PPR (Peripheral Page
Request) instead of 'PPF'. Fix them accrodingly.
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The usage of the local variables 'range' and 'misc' was removed
from commit 226e889b20 ("iommu/amd: Remove first/last_device handling")
and commit 23c742db21 ("iommu/amd: Split out PCI related parts of
IOMMU initialization"). So, remove them accrodingly.
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
After we make all map/unmap paths support first level page table.
Let's turn it on if hardware supports scalable mode.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
First-level translation may map input addresses to 4-KByte pages,
2-MByte pages, or 1-GByte pages. Support for 4-KByte pages and
2-Mbyte pages are mandatory for first-level translation. Hardware
support for 1-GByte page is reported through the FL1GP field in
the Capability Register.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
First-level translation restricts the input-address to a canonical
address (i.e., address bits 63:N have the same value as address
bit [N-1], where N is 48-bits with 4-level paging and 57-bits with
5-level paging). (section 3.6 in the spec)
This makes first level IOVA canonical by using IOVA with bit [N-1]
always cleared.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When software has changed first-level tables, it should invalidate
the affected IOTLB and the paging-structure-caches using the PASID-
based-IOTLB Invalidate Descriptor defined in spec 6.5.2.4.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Intel VT-d in scalable mode supports two types of page tables for
IOVA translation: first level and second level. The IOMMU driver
can choose one from both for IOVA translation according to the use
case. This sets up the pasid entry if a domain is selected to use
the first-level page table for iova translation.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Current intel_pasid_setup_first_level() use 5-level paging for
first level translation if CPUs use 5-level paging mode too.
This makes sense for SVA usages since the page table is shared
between CPUs and IOMMUs. But it makes no sense if we only want
to use first level for IOVA translation. Add PASID_FLAG_FL5LP
bit in the flags which indicates whether the 5-level paging
mode should be used.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This adds the Intel VT-d specific callback of setting
DOMAIN_ATTR_NESTING domain attribution. It is necessary
to let the VT-d driver know that the domain represents
a virtual machine which requires the IOMMU hardware to
support nested translation mode. Return success if the
IOMMU hardware suports nested mode, otherwise failure.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This checks whether a domain should use the first level page
table for map/unmap and marks it in the domain structure.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently if flush queue initialization fails, we return error
or enforce the system-wide strict mode. These are unnecessary
because we always check the existence of a flush queue before
queuing any iova's for lazy flushing. Printing a informational
message is enough.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If Intel IOMMU strict mode is enabled by users, it's unnecessary
to create the iova flush queue.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use combined macros for_each_svm_dev() to simplify SVM device iteration
and error checking.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Page responses should only be sent when last page in group (LPIG) or
private data is present in the page request. This patch avoids sending
invalid descriptors.
Fixes: 5d308fc1ec ("iommu/vt-d: Add 256-bit invalidation descriptor support")
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Make use of generic IOASID code to manage PASID allocation,
free, and lookup. Replace Intel specific code.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
PASID allocator uses IDR which is exclusive for the end of the
allocation range. There is no need to decrement pasid_max.
Fixes: af39507305 ("iommu/vt-d: Apply global PASID in SVA")
Reported-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
After each setup for PASID entry, related translation caches must be
flushed. We can combine duplicated code into one function which is less
error prone.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add a check during SVM bind to ensure CPU and IOMMU hardware capabilities
are met.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When setting up first level page tables for sharing with CPU, we need
to ensure IOMMU can support no less than the levels supported by the
CPU.
It is not adequate, as in the current code, to set up 5-level paging
in PASID entry First Level Paging Mode(FLPM) solely based on CPU.
Currently, intel_pasid_setup_first_level() is only used by native SVM
code which already checks paging mode matches. However, future use of
this helper function may not be limited to native SVM.
https://lkml.org/lkml/2019/11/18/1037
Fixes: 437f35e1cd ("iommu/vt-d: Add first level page table interface")
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Shared Virtual Memory(SVM) is based on a collective set of hardware
features detected at runtime. There are requirements for matching CPU
and IOMMU capabilities.
The current code checks CPU and IOMMU feature set for SVM support but
the result is never stored nor used. Therefore, SVM can still be used
even when these checks failed. The consequences can be:
1. CPU uses 5-level paging mode for virtual address of 57 bits, but
IOMMU can only support 4-level paging mode with 48 bits address for DMA.
2. 1GB page size is used by CPU but IOMMU does not support it. VT-d
unrecoverable faults may be generated.
The best solution to fix these problems is to prevent them in the first
place.
This patch consolidates code for checking PASID, CPU vs. IOMMU paging
mode compatibility, as well as provides specific error messages for
each failed checks. On sane hardware configurations, these error message
shall never appear in kernel log.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This adds Kconfig option INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON
to make it easier for distributions to enable or disable the
Intel IOMMU scalable mode by default during kernel build.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
ioremap has provided non-cached semantics by default since the Linux 2.6
days, so remove the additional ioremap_nocache interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
The iommu variable in set_device_exclusion_range() us unused
now and causes a compiler warning. Remove it.
Fixes: 387caf0b75 ("iommu/amd: Treat per-device exclusion ranges as r/w unity-mapped regions")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use the new standard function instead of open-coding it.
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: virtualization@lists.linux-foundation.org
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use the new standard function instead of open-coding it.
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use the new standard function instead of open-coding it.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use the new standard function instead of open-coding it.
Cc: Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Implement a generic function for removing reserved regions. This can be
used by drivers that don't do anything fancy with these regions other
than allocating memory for them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Current implementation for IOMMU x2APIC support makes use of
the MMIO access to MSI capability block registers, which requires
checking EFR[MsiCapMmioSup]. However, only IVHD type 11h/40h contain
the information, and not in the IVHD type 10h IOMMU feature reporting
field. Since the BIOS in newer systems, which supports x2APIC, would
normally contain IVHD type 11h/40h, remove the IOMMU_FEAT_XTSUP_SHIFT
check for IVHD type 10h, and only support x2APIC with IVHD type 11h/40h.
Fixes: 6692981295 ('iommu/amd: Add support for X2APIC IOMMU interrupts')
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The IOMMU MMIO access to MSI capability registers is available only if
the EFR[MsiCapMmioSup] is set. Current implementation assumes this bit
is set if the EFR[XtSup] is set, which might not be the case.
Fix by checking the EFR[MsiCapMmioSup] before accessing the MSI address
low/high and MSI data registers via the MMIO.
Fixes: 6692981295 ('iommu/amd: Add support for X2APIC IOMMU interrupts')
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some buggy BIOSes might define multiple exclusion ranges of the
IVMD entries which are associated with the same IOMMU hardware.
This leads to the overwritten exclusion range (exclusion_start
and exclusion_length members) in set_device_exclusion_range().
Here is a real case:
When attaching two Broadcom RAID controllers to a server, the first
one reports the failure during booting (the disks connecting to the
RAID controller cannot be detected).
This patch prevents the issue by treating per-device exclusion
ranges as r/w unity-mapped regions.
Discussion:
* https://lists.linuxfoundation.org/pipermail/iommu/2019-November/040140.html
Suggested-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
I no longer work for Arm, so update the stale reference to my old email
address.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
By conditionally dropping support for the legacy binding and exporting
the newly introduced 'arm_smmu_impl_init()' function we can allow the
ARM SMMU driver to be built as a module.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When removing the SMMU driver, we need to clear any state that we
registered during probe. This includes our bus ops, sysfs entries and
the IOMMU device registered for early firmware probing of masters.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
By removing the redundant call to 'pci_request_acs()' we can allow the
ARM SMMUv3 driver to be built as a module.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add support for SMMU drivers built as modules to the ACPI/IORT device
probing path, by deferring the probe of the master if the SMMU driver is
known to exist but has not been loaded yet. Given that the IORT code
registers a platform device for each SMMU that it discovers, we can
easily trigger the udev based autoloading of the SMMU drivers by making
the platform device identifier part of the module alias.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: John Garry <john.garry@huawei.com> # only manual smmu ko loading
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When removing the SMMUv3 driver, we need to clear any state that we
registered during probe. This includes our bus ops, sysfs entries and
the IOMMU device registered for early firmware probing of masters.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Forcefully unbinding the Arm SMMU drivers is a pretty dangerous operation,
since it will likely lead to catastrophic failure for any DMA devices
mastering through the SMMU being unbound. When the driver then attempts
to "handle" the fatal faults, it's very easy to trip over dead data
structures, leading to use-after-free.
On John's machine, he reports that the machine was "unusable" due to
loss of the storage controller following a forced unbind of the SMMUv3
driver:
| # cd ./bus/platform/drivers/arm-smmu-v3
| # echo arm-smmu-v3.0.auto > unbind
| hisi_sas_v2_hw HISI0162:01: CQE_AXI_W_ERR (0x800) found!
| platform arm-smmu-v3.0.auto: CMD_SYNC timeout at 0x00000146
| [hwprod 0x00000146, hwcons 0x00000000]
Prevent this forced unbinding of the drivers by setting "suppress_bind_attrs"
to true.
Link: https://lore.kernel.org/lkml/06dfd385-1af0-3106-4cc5-6a5b8e864759@huawei.com
Reported-by: John Garry <john.garry@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This reverts commit addb672f20.
Let's get the SMMU driver building as a module, which means putting
back some dead code that we used to carry.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This reverts commit c07b6426df.
Let's get the SMMUv3 driver building as a module, which means putting
back some dead code that we used to carry.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
'bus_set_iommu()' allows IOMMU drivers to register their ops for a given
bus type. Unfortunately, it then doesn't allow them to be removed, which
is necessary for modular drivers to shutdown cleanly so that they can be
reloaded later on.
Allow 'bus_set_iommu()' to take a NULL 'ops' argument, which clear the
ops pointer for the selected bus_type.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Ensure that we hold a reference to the IOMMU driver module while calling
the '->of_xlate()' callback during early device probing.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To avoid accidental removal of an active IOMMU driver module, take a
reference to the driver module in 'iommu_probe_device()' immediately
prior to invoking the '->add_device()' callback and hold it until the
after the device has been removed by '->remove_device()'.
Suggested-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To avoid having to export 'pci_request_acs()' to modular IOMMU drivers,
move the call into the 'of_dma_configure()' path in a similar manner to
the way in which ACS is configured when probing via ACPI/IORT.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Building IOMMU drivers as modules requires that the core IOMMU API
symbols are exported as GPL symbols.
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: John Garry <john.garry@huawei.com> # smmu v3
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Including:
- Fix kmemleak warning in IOVA code
- Fix compile warnings on ARM32/64 in dma-iommu code due to
dma_mask type mismatches
- Make ISA reserved regions relaxable, so that VFIO can assign
devices which have such regions defined
- Fix mapping errors resulting in IO page-faults in the VT-d
driver
- Make sure direct mappings for a domain are created after the
default domain is updated
- Map ISA reserved regions in the VT-d driver with correct
permissions
- Remove unneeded check for PSI capability in the IOTLB flush
code of the VT-d driver
- Lockdep fix iommu_dma_prepare_msi()
-----BEGIN PGP SIGNATURE-----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=VWME
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Fix kmemleak warning in IOVA code
- Fix compile warnings on ARM32/64 in dma-iommu code due to dma_mask
type mismatches
- Make ISA reserved regions relaxable, so that VFIO can assign devices
which have such regions defined
- Fix mapping errors resulting in IO page-faults in the VT-d driver
- Make sure direct mappings for a domain are created after the default
domain is updated
- Map ISA reserved regions in the VT-d driver with correct permissions
- Remove unneeded check for PSI capability in the IOTLB flush code of
the VT-d driver
- Lockdep fix iommu_dma_prepare_msi()
* tag 'iommu-fixes-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/dma: Relax locking in iommu_dma_prepare_msi()
iommu/vt-d: Remove incorrect PSI capability check
iommu/vt-d: Allocate reserved region for ISA with correct permission
iommu: set group default domain before creating direct mappings
iommu/vt-d: Fix dmar pte read access not set error
iommu/vt-d: Set ISA bridge reserved region as relaxable
iommu/dma: Rationalise types for DMA masks
iommu/iova: Init the struct iova to fix the possible memleak
Add a "nr_devfns" parameter to pci_add_dma_alias() so it can be used to
create DMA aliases for a range of devfns.
[bhelgaas: incorporate nr_devfns fix from James, update
quirk_pex_vca_alias() and setup_aliases()]
Signed-off-by: James Sewart <jamessewart@arista.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Since commit ece6e6f021 ("iommu/dma-iommu: Split iommu_dma_map_msi_msg()
in two parts"), iommu_dma_prepare_msi() should no longer have to worry
about preempting itself, nor being called in atomic context at all. Thus
we can downgrade the IRQ-safe locking to a simple mutex to avoid angering
the new might_sleep() check in iommu_map().
Reported-by: Qian Cai <cai@lca.pw>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The PSI (Page Selective Invalidation) bit in the capability register
is only valid for second-level translation. Intel IOMMU supporting
scalable mode must support page/address selective IOTLB invalidation
for first-level translation. Remove the PSI capability check in SVA
cache invalidation code.
Fixes: 8744daf4b0 ("iommu/vt-d: Remove global page flush support")
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently the reserved region for ISA is allocated with no
permissions. If a dma domain is being used, mapping this region will
fail. Set the permissions to DMA_PTE_READ|DMA_PTE_WRITE.
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: stable@vger.kernel.org # v5.3+
Fixes: d850c2ee5f ("iommu/vt-d: Expose ISA direct mapping region via iommu_get_resv_regions")
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
iommu_group_create_direct_mappings uses group->default_domain, but
right after it is called, request_default_domain_for_dev calls
iommu_domain_free for the default domain, and sets the group default
domain to a different domain. Move the
iommu_group_create_direct_mappings call to after the group default
domain is set, so the direct mappings get associated with that domain.
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: stable@vger.kernel.org
Fixes: 7423e01741 ("iommu: Add API to request DMA domain for device")
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If the default DMA domain of a group doesn't fit a device, it
will still sit in the group but use a private identity domain.
When map/unmap/iova_to_phys come through iommu API, the driver
should still serve them, otherwise, other devices in the same
group will be impacted. Since identity domain has been mapped
with the whole available memory space and RMRRs, we don't need
to worry about the impact on it.
Link: https://www.spinics.net/lists/iommu/msg40416.html
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
Fixes: 942067f1b6 ("iommu/vt-d: Identify default domains replaced with private")
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit d850c2ee5f ("iommu/vt-d: Expose ISA direct mapping region via
iommu_get_resv_regions") created a direct-mapped reserved memory region
in order to replace the static identity mapping of the ISA address
space, where the latter was then removed in commit df4f3c603a
("iommu/vt-d: Remove static identity map code"). According to the
history of this code and the Kconfig option surrounding it, this direct
mapping exists for the benefit of legacy ISA drivers that are not
compatible with the DMA API.
In conjuntion with commit 9b77e5c798 ("vfio/type1: check dma map
request is within a valid iova range") this change introduced a
regression where the vfio IOMMU backend enforces reserved memory regions
per IOMMU group, preventing userspace from creating IOMMU mappings
conflicting with prescribed reserved regions. A necessary prerequisite
for the vfio change was the introduction of "relaxable" direct mappings
introduced by commit adfd373820 ("iommu: Introduce
IOMMU_RESV_DIRECT_RELAXABLE reserved memory regions"). These relaxable
direct mappings provide the same identity mapping support in the default
domain, but also indicate that the reservation is software imposed and
may be relaxed under some conditions, such as device assignment.
Convert the ISA bridge direct-mapped reserved region to relaxable to
reflect that the restriction is self imposed and need not be enforced
by drivers such as vfio.
Fixes: 1c5c59fbad ("iommu/vt-d: Differentiate relaxable and non relaxable RMRRs")
Cc: stable@vger.kernel.org # v5.3+
Link: https://lore.kernel.org/linux-iommu/20191211082304.2d4fab45@x1.home
Reported-by: cprt <cprt@protonmail.com>
Tested-by: cprt <cprt@protonmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since iommu_dma_alloc_iova() combines incoming masks with the u64 bus
limit, it makes more sense to pass them around in their native u64
rather than converting to dma_addr_t early. Do that, and resolve the
remaining type discrepancy against the domain geometry with a cheeky
cast to keep things simple.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Nathan Chancellor <natechancellor@gmail.com> # build
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In case the new region gets merged into another one, the nr list node is
freed. Checking its type while completing the merge algorithm leads to
a use-after-free. Use new->type instead.
Fixes: 4dbd258ff6 ("iommu: Revisit iommu_insert_resv_region() implementation")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Qian Cai <cai@lca.pw>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Stable <stable@vger.kernel.org> #v5.3+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=uUXw
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Warn if a host bridge has no NUMA info (Yunsheng Lin)
- Add PCI_STD_NUM_BARS for the number of standard BARs (Denis
Efremov)
Resource management:
- Fix boot-time Embedded Controller GPE storm caused by incorrect
resource assignment after ACPI Bus Check Notification (Mika
Westerberg)
- Protect pci_reassign_bridge_resources() against concurrent
addition/removal (Benjamin Herrenschmidt)
- Fix bridge dma_ranges resource list cleanup (Rob Herring)
- Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control
the MMIO and prefetchable MMIO window sizes of hotplug bridges
independently (Nicholas Johnson)
- Fix MMIO/MMIO_PREF window assignment that assigned more space than
desired (Nicholas Johnson)
- Only enforce bus numbers from bridge EA if the bridge has EA
devices downstream (Subbaraya Sundeep)
- Consolidate DT "dma-ranges" parsing and convert all host drivers to
use shared parsing (Rob Herring)
Error reporting:
- Restore AER capability after resume (Mayurkumar Patel)
- Add PoisonTLPBlocked AER counter (Rajat Jain)
- Use for_each_set_bit() to simplify AER code (Andy Shevchenko)
- Fix AER kernel-doc (Andy Shevchenko)
- Add "pcie_ports=dpc-native" parameter to allow native use of DPC
even if platform didn't grant control over AER (Olof Johansson)
Hotplug:
- Avoid returning prematurely from sysfs requests to enable or
disable a PCIe hotplug slot (Lukas Wunner)
- Don't disable interrupts twice when suspending hotplug ports (Mika
Westerberg)
- Fix deadlocks when PCIe ports are hot-removed while suspended (Mika
Westerberg)
Power management:
- Remove unnecessary ASPM locking (Bjorn Helgaas)
- Add support for disabling L1 PM Substates (Heiner Kallweit)
- Allow re-enabling Clock PM after it has been disabled (Heiner
Kallweit)
- Add sysfs attributes for controlling ASPM link states (Heiner
Kallweit)
- Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl"
sysfs files (Heiner Kallweit)
- Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on
USB 2.0 or 1.1 connect events (Kai-Heng Feng)
- Move power state check out of pci_msi_supported() (Bjorn Helgaas)
- Fix incorrect MSI-X masking on resume and revert related nvme quirk
for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan)
- Always return devices to D0 when thawing to fix hibernation with
drivers like mlx4 that used legacy power management (previously we
only did it for drivers with new power management ops) (Dexuan Cui)
- Clear PCIe PME Status even for legacy power management (Bjorn
Helgaas)
- Fix PCI PM documentation errors (Bjorn Helgaas)
- Use dev_printk() for more power management messages (Bjorn Helgaas)
- Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas)
- Convert xen-platform from legacy to generic power management (Bjorn
Helgaas)
- Removed unused .resume_early() and .suspend_late() legacy power
management hooks (Bjorn Helgaas)
- Rearrange power management code for clarity (Rafael J. Wysocki)
- Decode power states more clearly ("4" or "D4" really refers to
"D3cold") (Bjorn Helgaas)
- Notice when reading PM Control register returns an error (~0)
instead of interpreting it as being in D3hot (Bjorn Helgaas)
- Add missing link delays required by the PCIe spec (Mika Westerberg)
Virtualization:
- Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn
Helgaas)
- Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code
previously didn't recognize that) (Kuppuswamy Sathyanarayanan)
- Allow VFs to use PASID (the PF PASID capability is shared by the
VFs, but the code previously didn't recognize that) (Kuppuswamy
Sathyanarayanan)
- Disconnect PF and VF ATS enablement, since ATS in PFs and
associated VFs can be enabled independently (Kuppuswamy
Sathyanarayanan)
- Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan)
- Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas)
- Consolidate ATS declarations in linux/pci-ats.h (Krzysztof
Wilczynski)
- Remove unused PRI and PASID stubs (Bjorn Helgaas)
- Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID
interfaces that are only used by built-in IOMMU drivers (Bjorn
Helgaas)
- Hide PRI and PASID state restoration functions used only inside the
PCI core (Bjorn Helgaas)
- Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski)
- Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut)
- Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George
Cherian)
- Fix the UPDCR register address in the Intel ACS quirk (Steffen
Liebergeld)
- Unify ACS quirk implementations (Bjorn Helgaas)
Amlogic Meson host bridge driver:
- Fix meson PERST# GPIO polarity problem (Remi Pommarel)
- Add DT bindings for Amlogic Meson G12A (Neil Armstrong)
- Fix meson clock names to match DT bindings (Neil Armstrong)
- Add meson support for Amlogic G12A SoC with separate shared PHY
(Neil Armstrong)
- Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe
combo PHY (Neil Armstrong)
- Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong)
- Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT
(Neil Armstrong)
Broadcom iProc host bridge driver:
- Invalidate iProc PAXB address mapping before programming it
(Abhishek Shah)
- Fix iproc-msi and mvebu __iomem annotations (Ben Dooks)
Cadence host bridge driver:
- Refactor Cadence PCIe host controller to use as a library for both
host and endpoint (Tom Joseph)
Freescale Layerscape host bridge driver:
- Add layerscape LS1028a support (Xiaowei Bao)
Intel VMD host bridge driver:
- Add VMD bus 224-255 restriction decode (Jon Derrick)
- Add VMD 8086:9A0B device ID (Jon Derrick)
- Remove Keith from VMD maintainer list (Keith Busch)
Marvell ARMADA 3700 / Aardvark host bridge driver:
- Use LTSSM state to build link training flag since Aardvark doesn't
implement the Link Training bit (Remi Pommarel)
- Delay before training Aardvark link in case PERST# was asserted
before the driver probe (Remi Pommarel)
- Fix Aardvark issues with Root Control reads and writes (Remi
Pommarel)
- Don't rely on jiffies in Aardvark config access path since
interrupts may be disabled (Remi Pommarel)
- Fix Aardvark big-endian support (Grzegorz Jaszczyk)
Marvell ARMADA 370 / XP host bridge driver:
- Make mvebu_pci_bridge_emul_ops static (Ben Dooks)
Microsoft Hyper-V host bridge driver:
- Add hibernation support for Hyper-V virtual PCI devices (Dexuan
Cui)
- Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan
Cui)
- Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui)
Mobiveil host bridge driver:
- Change mobiveil csr_read()/write() function names that conflict
with riscv arch functions (Kefeng Wang)
NVIDIA Tegra host bridge driver:
- Fix Tegra CLKREQ dependency programming (Vidya Sagar)
Renesas R-Car host bridge driver:
- Remove unnecessary header include from rcar (Andrew Murray)
- Tighten register index checking for rcar inbound range programming
(Marek Vasut)
- Fix rcar inbound range alignment calculation to improve packing of
multiple entries (Marek Vasut)
- Update rcar MACCTLR setting to match documentation (Yoshihiro
Shimoda)
- Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual
(Yoshihiro Shimoda)
- Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon
Horman)
Rockchip host bridge driver:
- Make rockchip 0V9 and 1V8 power regulators non-optional (Robin
Murphy)
Socionext UniPhier host bridge driver:
- Set uniphier to host (RC) mode always (Kunihiko Hayashi)
Endpoint drivers:
- Fix endpoint driver sign extension problem when shifting page
number to phys_addr_t (Alan Mikhak)
Misc:
- Add NumaChip SPDX header (Krzysztof Wilczynski)
- Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski)
- Remove unused includes (Krzysztof Wilczynski)
- Removed unused sysfs attribute groups (Ben Dooks)
- Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas)
- Add PCIe Link Control 2 register field definitions to replace magic
numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas)
- Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and
Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas)
- Use pcie_capability_read_word() instead of pci_read_config_word()
in AMDGPU and Radeon CIK/SI (Frederick Lawler)
- Remove unused pci_irq_get_node() Greg Kroah-Hartman)
- Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig
(Palmer Dabbelt, Michal Simek)
- Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe)
- Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn
Helgaas)
- Fix bridge emulation big-endian support (Grzegorz Jaszczyk)
- Fix dwc find_next_bit() usage (Niklas Cassel)
- Fix pcitest.c fd leak (Hewenliang)
- Fix typos and comments (Bjorn Helgaas)
- Fix Kconfig whitespace errors (Krzysztof Kozlowski)"
* tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits)
PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist
asm-generic: Make msi.h a mandatory include/asm header
Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T"
PCI/MSI: Fix incorrect MSI-X masking on resume
PCI/MSI: Move power state check out of pci_msi_supported()
PCI/MSI: Remove unused pci_irq_get_node()
PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer
PCI: hv: Change pci_protocol_version to per-hbus
PCI: hv: Add hibernation support
PCI: hv: Reorganize the code in preparation of hibernation
MAINTAINERS: Remove Keith from VMD maintainer
PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code
PCI/ASPM: Add sysfs attributes for controlling ASPM link states
PCI: Fix indentation
drm/radeon: Prefer pcie_capability_read_word()
drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions
drm/radeon: Correct Transmit Margin masks
drm/amdgpu: Prefer pcie_capability_read_word()
PCI: uniphier: Set mode register to host mode
drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions
...
Including:
- Conversion of the AMD IOMMU driver to use the dma-iommu code
for imlementing the DMA-API. This gets rid of quite some code
in the driver itself, but also has some potential for
regressions (non are known at the moment).
- Support for the Qualcomm SMMUv2 implementation in the SDM845
SoC. This also includes some firmware interface changes, but
those are acked by the respective maintainers.
- Preparatory work to support two distinct page-tables per
domain in the ARM-SMMU driver
- Power management improvements for the ARM SMMUv2
- Custom PASID allocator support
- Multiple PCI DMA alias support for the AMD IOMMU driver
- Adaption of the Mediatek driver to the changed IO/TLB flush
interface of the IOMMU core code.
- Preparatory patches for the Renesas IOMMU driver to support
future hardware.
-----BEGIN PGP SIGNATURE-----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=ntaE
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Conversion of the AMD IOMMU driver to use the dma-iommu code for
imlementing the DMA-API. This gets rid of quite some code in the
driver itself, but also has some potential for regressions (non are
known at the moment).
- Support for the Qualcomm SMMUv2 implementation in the SDM845 SoC.
This also includes some firmware interface changes, but those are
acked by the respective maintainers.
- Preparatory work to support two distinct page-tables per domain in
the ARM-SMMU driver
- Power management improvements for the ARM SMMUv2
- Custom PASID allocator support
- Multiple PCI DMA alias support for the AMD IOMMU driver
- Adaption of the Mediatek driver to the changed IO/TLB flush interface
of the IOMMU core code.
- Preparatory patches for the Renesas IOMMU driver to support future
hardware.
* tag 'iommu-updates-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (62 commits)
iommu/rockchip: Don't provoke WARN for harmless IRQs
iommu/vt-d: Turn off translations at shutdown
iommu/vt-d: Check VT-d RMRR region in BIOS is reported as reserved
iommu/arm-smmu: Remove duplicate error message
iommu/arm-smmu-v3: Don't display an error when IRQ lines are missing
iommu/ipmmu-vmsa: Add utlb_offset_base
iommu/ipmmu-vmsa: Add helper functions for "uTLB" registers
iommu/ipmmu-vmsa: Calculate context registers' offset instead of a macro
iommu/ipmmu-vmsa: Add helper functions for MMU "context" registers
iommu/ipmmu-vmsa: tidyup register definitions
iommu/ipmmu-vmsa: Remove all unused register definitions
iommu/mediatek: Reduce the tlb flush timeout value
iommu/mediatek: Get rid of the pgtlock
iommu/mediatek: Move the tlb_sync into tlb_flush
iommu/mediatek: Delete the leaf in the tlb_flush
iommu/mediatek: Use gather to achieve the tlb range flush
iommu/mediatek: Add a new tlb_lock for tlb_flush
iommu/mediatek: Correct the flush_iotlb_all callback
iommu/io-pgtable-arm: Rename IOMMU_QCOM_SYS_CACHE and improve doc
iommu/io-pgtable-arm: Rationalise MAIR handling
...
- Hibernation support (Dexuan Cui).
- Latency testing framework (Branden Bonaby).
- Decoupling Hyper-V page size from guest page size (Himadri Pandya).
-----BEGIN PGP SIGNATURE-----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=oJGE
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V updates from Sasha Levin:
- support for new VMBus protocols (Andrea Parri)
- hibernation support (Dexuan Cui)
- latency testing framework (Branden Bonaby)
- decoupling Hyper-V page size from guest page size (Himadri Pandya)
* tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (22 commits)
Drivers: hv: vmbus: Fix crash handler reset of Hyper-V synic
drivers/hv: Replace binary semaphore with mutex
drivers: iommu: hyperv: Make HYPERV_IOMMU only available on x86
HID: hyperv: Add the support of hibernation
hv_balloon: Add the support of hibernation
x86/hyperv: Implement hv_is_hibernation_supported()
Drivers: hv: balloon: Remove dependencies on guest page size
Drivers: hv: vmbus: Remove dependencies on guest page size
x86: hv: Add function to allocate zeroed page for Hyper-V
Drivers: hv: util: Specify ring buffer size using Hyper-V page size
Drivers: hv: Specify receive buffer size using Hyper-V page size
tools: hv: add vmbus testing tool
drivers: hv: vmbus: Introduce latency testing
video: hyperv: hyperv_fb: Support deferred IO for Hyper-V frame buffer driver
video: hyperv: hyperv_fb: Obtain screen resolution from Hyper-V host
hv_netvsc: Add the support of hibernation
hv_sock: Add the support of hibernation
video: hyperv_fb: Add the support of hibernation
scsi: storvsc: Add the support of hibernation
Drivers: hv: vmbus: Add module parameter to cap the VMBus version
...
- improve dma-debug scalability (Eric Dumazet)
- tiny dma-debug cleanup (Dan Carpenter)
- check for vmap memory in dma_map_single (Kees Cook)
- check for dma_addr_t overflows in dma-direct when using
DMA offsets (Nicolas Saenz Julienne)
- switch the x86 sta2x11 SOC to use more generic DMA code
(Nicolas Saenz Julienne)
- fix arm-nommu dma-ranges handling (Vladimir Murzin)
- use __initdata in CMA (Shyam Saini)
- replace the bus dma mask with a limit (Nicolas Saenz Julienne)
- merge the remapping helpers into the main dma-direct flow (me)
- switch xtensa to the generic dma remap handling (me)
- various cleanups around dma_capable (me)
- remove unused dev arguments to various dma-noncoherent helpers (me)
-----BEGIN PGP SIGNATURE-----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=e5wO
-----END PGP SIGNATURE-----
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux; tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- improve dma-debug scalability (Eric Dumazet)
- tiny dma-debug cleanup (Dan Carpenter)
- check for vmap memory in dma_map_single (Kees Cook)
- check for dma_addr_t overflows in dma-direct when using DMA offsets
(Nicolas Saenz Julienne)
- switch the x86 sta2x11 SOC to use more generic DMA code (Nicolas
Saenz Julienne)
- fix arm-nommu dma-ranges handling (Vladimir Murzin)
- use __initdata in CMA (Shyam Saini)
- replace the bus dma mask with a limit (Nicolas Saenz Julienne)
- merge the remapping helpers into the main dma-direct flow (me)
- switch xtensa to the generic dma remap handling (me)
- various cleanups around dma_capable (me)
- remove unused dev arguments to various dma-noncoherent helpers (me)
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux:
* tag 'dma-mapping-5.5' of git://git.infradead.org/users/hch/dma-mapping: (22 commits)
dma-mapping: treat dev->bus_dma_mask as a DMA limit
dma-direct: exclude dma_direct_map_resource from the min_low_pfn check
dma-direct: don't check swiotlb=force in dma_direct_map_resource
dma-debug: clean up put_hash_bucket()
powerpc: remove support for NULL dev in __phys_to_dma / __dma_to_phys
dma-direct: avoid a forward declaration for phys_to_dma
dma-direct: unify the dma_capable definitions
dma-mapping: drop the dev argument to arch_sync_dma_for_*
x86/PCI: sta2x11: use default DMA address translation
dma-direct: check for overflows on 32 bit DMA addresses
dma-debug: increase HASH_SIZE
dma-debug: reorder struct dma_debug_entry fields
xtensa: use the generic uncached segment support
dma-mapping: merge the generic remapping helpers into dma-direct
dma-direct: provide mmap and get_sgtable method overrides
dma-direct: remove the dma_handle argument to __dma_direct_alloc_pages
dma-direct: remove __dma_direct_free_pages
usb: core: Remove redundant vmap checks
kernel: dma-contiguous: mark CMA parameters __initdata/__initconst
dma-debug: add a schedule point in debug_dma_dump_mappings()
...
- Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn
Helgaas)
- Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn Helgaas)
- Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code
previously didn't recognize that) (Kuppuswamy Sathyanarayanan)
- Allow VFs to use PASID (the PF PASID capability is shared by the VFs,
but the code previously didn't recognize that) (Kuppuswamy
Sathyanarayanan)
- Disconnect PF and VF ATS enablement, since ATS in PFs and associated
VFs can be enabled independently (Kuppuswamy Sathyanarayanan)
- Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan)
- Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas)
- Consolidate ATS declarations in linux/pci-ats.h (Krzysztof Wilczynski)
- Remove unused PRI and PASID stubs (Bjorn Helgaas)
- Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID
interfaces that are only used by built-in IOMMU drivers (Bjorn Helgaas)
- Hide PRI and PASID state restoration functions used only inside the PCI
core (Bjorn Helgaas)
- Fix the UPDCR register address in the Intel ACS quirk (Steffen
Liebergeld)
- Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski)
- Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut)
- Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George Cherian)
- Unify ACS quirk implementations (Bjorn Helgaas)
* pci/virtualization:
PCI: Unify ACS quirk desired vs provided checking
PCI: Make ACS quirk implementations more uniform
PCI: Apply Cavium ACS quirk to ThunderX2 and ThunderX3
PCI/IOV: Serialize sysfs sriov_numvfs reads vs writes
PCI: Add DMA alias quirk for Intel VCA NTB
PCI: Fix Intel ACS quirk UPDCR register address
PCI/ATS: Make pci_restore_pri_state(), pci_restore_pasid_state() private
PCI/ATS: Remove unnecessary EXPORT_SYMBOL_GPL()
PCI/ATS: Remove unused PRI and PASID stubs
PCI/ATS: Consolidate ATS declarations in linux/pci-ats.h
PCI/ATS: Cache PRI PRG Response PASID Required bit
PCI/ATS: Cache PASID Capability offset
PCI/ATS: Cache PRI Capability offset
PCI/ATS: Disable PF/VF ATS service independently
PCI/ATS: Handle sharing of PF PASID Capability with all VFs
PCI/ATS: Handle sharing of PF PRI Capability with all VFs
PCI/ATS: Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI
iommu/vt-d: Select PCI_PRI for INTEL_IOMMU_SVM
Currently hyperv-iommu is implemented in a x86 specific way, for
example, apic is used. So make the HYPERV_IOMMU Kconfig depend on X86
as a preparation for enabling HyperV on architecture other than x86.
Cc: Lan Tianyu <Tianyu.Lan@microsoft.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: linux-hyperv@vger.kernel.org
Signed-off-by: Boqun Feng (Microsoft) <boqun.feng@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Using a mask to represent bus DMA constraints has a set of limitations.
The biggest one being it can only hold a power of two (minus one). The
DMA mapping code is already aware of this and treats dev->bus_dma_mask
as a limit. This quirk is already used by some architectures although
still rare.
With the introduction of the Raspberry Pi 4 we've found a new contender
for the use of bus DMA limits, as its PCIe bus can only address the
lower 3GB of memory (of a total of 4GB). This is impossible to represent
with a mask. To make things worse the device-tree code rounds non power
of two bus DMA limits to the next power of two, which is unacceptable in
this case.
In the light of this, rename dev->bus_dma_mask to dev->bus_dma_limit all
over the tree and treat it as such. Note that dev->bus_dma_limit should
contain the higher accessible DMA address.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Remove <linux/pci.h> and <linux/msi.h> from being included directly as part
of the include/linux/of_pci.h, and remove superfluous declaration of struct
of_phandle_args.
Move users of include <linux/of_pci.h> to include <linux/pci.h> and
<linux/msi.h> directly rather than rely on both being included transitively
through <linux/of_pci.h>.
Link: https://lore.kernel.org/r/20190903113059.2901-1-kw@linux.com
Signed-off-by: Krzysztof Wilczynski <kw@linux.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
These are pure cache maintainance routines, so drop the unused
struct device argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Although we don't generally expect IRQs to fire for a suspended IOMMU,
there are certain situations (particularly with debug options) where
we might legitimately end up with the pm_runtime_get_if_in_use() call
from rk_iommu_irq() returning 0. Since this doesn't represent an actual
error, follow the other parts of the driver and save the WARN_ON()
condition for a genuine negative value. Even if we do have spurious
IRQs due to a wedged VOP asserting the shared line, it's not this
driver's job to try to second-guess the IRQ core to warn about that.
Reported-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The intel-iommu driver assumes that the iommu state is
cleaned up at the start of the new kernel.
But, when we try to kexec boot something other than the
Linux kernel, the cleanup cannot be relied upon.
Hence, cleanup before we go down for reboot.
Keeping the cleanup at initialization also, in case BIOS
leaves the IOMMU enabled.
I considered turning off iommu only during kexec reboot, but a clean
shutdown seems always a good idea. But if someone wants to make it
conditional, such as VMM live update, we can do that. There doesn't
seem to be such a condition at this time.
Tested that before, the info message
'DMAR: Translation was enabled for <iommu> but we are not in kdump mode'
would be reported for each iommu. The message will not appear when the
DMA-remapping is not enabled on entry to the kernel.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
VT-d RMRR (Reserved Memory Region Reporting) regions are reserved
for device use only and should not be part of allocable memory pool of OS.
BIOS e820_table reports complete memory map to OS, including OS usable
memory ranges and BIOS reserved memory ranges etc.
x86 BIOS may not be trusted to include RMRR regions as reserved type
of memory in its e820 memory map, hence validate every RMRR entry
with the e820 memory map to make sure the RMRR regions will not be
used by OS for any other purposes.
ia64 EFI is working fine so implement RMRR validation as a dummy function
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Yian Chen <yian.chen@intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since commit 7723f4c5ec ("driver core: platform: Add an error message
to platform_get_irq*()"), platform_get_irq() displays an error when the
IRQ isn't found. Remove the error print from the SMMU driver. Note the
slight change of behaviour: no message is printed if platform_get_irq()
returns -EPROBE_DEFER, which probably doesn't concern the SMMU.
Fixes: 7723f4c5ec ("driver core: platform: Add an error message to platform_get_irq*()")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since commit 7723f4c5ec ("driver core: platform: Add an error message
to platform_get_irq*()"), platform_get_irq_byname() displays an error
when the IRQ isn't found. Since the SMMUv3 driver uses that function to
query which interrupt method is available, the message is now displayed
during boot for any SMMUv3 that doesn't implement the combined
interrupt, or that implements MSIs.
[ 20.700337] arm-smmu-v3 arm-smmu-v3.7.auto: IRQ combined not found
[ 20.706508] arm-smmu-v3 arm-smmu-v3.7.auto: IRQ eventq not found
[ 20.712503] arm-smmu-v3 arm-smmu-v3.7.auto: IRQ priq not found
[ 20.718325] arm-smmu-v3 arm-smmu-v3.7.auto: IRQ gerror not found
Use platform_get_irq_byname_optional() to avoid displaying a spurious
error.
Fixes: 7723f4c5ec ("driver core: platform: Add an error message to platform_get_irq*()")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since we will have changed memory mapping of the IPMMU in the future,
this patch adds a utlb_offset_base into struct ipmmu_features
for IMUCTR and IMUASID registers. No behavior change.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since we will have changed memory mapping of the IPMMU in the future,
This patch adds helper functions ipmmu_utlb_reg() and
ipmmu_imu{asid,ctr}_write() for "uTLB" registers. No behavior change.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since we will have changed memory mapping of the IPMMU in the future,
this patch uses ipmmu_features values instead of a macro to
calculate context registers offset. No behavior change.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since we will have changed memory mapping of the IPMMU in the future,
This patch adds helper functions ipmmu_ctx_{reg,read,write}()
for MMU "context" registers. No behavior change.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To support different registers memory mapping hardware easily
in the future, this patch tidies up the register definitions
as below:
- Add comments to state to which SoCs or SoC families they apply
- Add categories about MMU "context" and uTLB registers
No change behavior.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To support different registers memory mapping hardware easily
in the future, this patch removes all unused register
definitions.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Reduce the tlb timeout value from 100000us to 1000us. The original value
would make the kernel stuck for 100 ms with interrupts disabled, which
could have other side effects. The flush is expected to always take much
less than 1 ms, so use that instead.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Now we have tlb_lock for the HW tlb flush, then pgtable code hasn't
needed the external "pgtlock" for a while. this patch remove the
"pgtlock".
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Right now, the tlb_add_flush_nosync and tlb_sync always appear together.
we merge the two functions into one(also move the tlb_lock into the new
function). No functional change.
Signed-off-by: Chao Hao <chao.hao@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In our tlb range flush, we don't care the "leaf". Remove it to simplify
the code. no functional change.
"granule" also is unnecessary for us, Keep it satisfy the format of
tlb_flush_walk.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use the iommu_gather mechanism to achieve the tlb range flush.
Gather the iova range in the "tlb_add_page", then flush the merged iova
range in iotlb_sync.
Suggested-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The commit 4d689b6194 ("iommu/io-pgtable-arm-v7s: Convert to IOMMU API
TLB sync") help move the tlb_sync of unmap from v7s into the iommu
framework. It helps add a new function "mtk_iommu_iotlb_sync", But it
lacked the lock, then it will cause the variable "tlb_flush_active"
may be changed unexpectedly, we could see this warning log randomly:
mtk-iommu 10205000.iommu: Partial TLB flush timed out, falling back to
full flush
The HW requires tlb_flush/tlb_sync in pairs strictly, this patch adds
a new tlb_lock for tlb operations to fix this issue.
Fixes: 4d689b6194 ("iommu/io-pgtable-arm-v7s: Convert to IOMMU API TLB sync")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use the correct tlb_flush_all instead of the original one.
Fixes: 4d689b6194 ("iommu/io-pgtable-arm-v7s: Convert to IOMMU API TLB sync")
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The 'IOMMU_QCOM_SYS_CACHE' IOMMU protection flag is exposed to all
users of the IOMMU API. Despite its name, the idea behind it isn't
especially tied to Qualcomm implementations and could conceivably be
used by other systems.
Rename it to 'IOMMU_SYS_CACHE_ONLY' and update the comment to describe
a bit better the idea behind it.
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: "Isaac J. Manjarres" <isaacm@codeaurora.org>
Signed-off-by: Will Deacon <will@kernel.org>
Between VMSAv8-64 and the various 32-bit formats, there is either one
64-bit MAIR or a pair of 32-bit MAIR0/MAIR1 or NMRR/PMRR registers.
As such, keeping two 64-bit values in io_pgtable_cfg has always been
overkill.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
The nature of the LPAE format means that data->pg_shift is always
redundant with data->bits_per_level, since they represent the size of a
page and the number of PTEs per page respectively, and the size of a PTE
is constant. Thus it works out more efficient to only store the latter,
and derive the former via a trivial addition where necessary.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[will: Reworked granule check in iopte_to_paddr()]
Signed-off-by: Will Deacon <will@kernel.org>
We use data->pgd_size directly for the one-off allocation and freeing of
the top-level table, but otherwise it serves for ARM_LPAE_PGD_IDX() to
repeatedly re-calculate the effective number of top-level address bits
it represents. Flip this around so we store the form we most commonly
need, and derive the lesser-used one instead. This cuts a whole bunch of
code out of the map/unmap/iova_to_phys fast-paths.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Beyond a couple of allocation-time calculations, data->levels is only
ever used to derive the start level. Storing the start level directly
leads to a small reduction in object code, which should help eke out a
little more efficiency, and slightly more readable source to boot.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
We're merely checking that the relevant upper bits of each address
are all zero, so there are cheaper ways to achieve that.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
It makes little sense to only validate the requested size after we think
we've found a matching block size - making the check up-front is simple,
and far more logical than waiting to walk off the bottom of the table to
infer that we must have been passed a bogus size to start with.
We're missing an equivalent check on the unmap path, so add that as well
for consistency.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
The selftests run as an initcall, but the annotation of the various
callbacks and data seems to be somewhat arbitrary. Add it consistently
for everything related to the selftests.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Merge in ARM SMMU fixes to avoid conflicts in the ARM io-pgtable code.
* for-joerg/arm-smmu/fixes:
iommu/io-pgtable-arm: Support all Mali configurations
iommu/io-pgtable-arm: Correct Mali attributes
iommu/arm-smmu: Free context bitmap in the err path of arm_smmu_init_domain_context
Add reset hook for sdm845 based platforms to turn off
the wait-for-safe sequence.
Understanding how wait-for-safe logic affects USB and UFS performance
on MTP845 and DB845 boards:
Qcom's implementation of arm,mmu-500 adds a WAIT-FOR-SAFE logic
to address under-performance issues in real-time clients, such as
Display, and Camera.
On receiving an invalidation requests, the SMMU forwards SAFE request
to these clients and waits for SAFE ack signal from real-time clients.
The SAFE signal from such clients is used to qualify the start of
invalidation.
This logic is controlled by chicken bits, one for each - MDP (display),
IFE0, and IFE1 (camera), that can be accessed only from secure software
on sdm845.
This configuration, however, degrades the performance of non-real time
clients, such as USB, and UFS etc. This happens because, with wait-for-safe
logic enabled the hardware tries to throttle non-real time clients while
waiting for SAFE ack signals from real-time clients.
On mtp845 and db845 devices, with wait-for-safe logic enabled by the
bootloaders we see degraded performance of USB and UFS when kernel
enables the smmu stage-1 translations for these clients.
Turn off this wait-for-safe logic from the kernel gets us back the perf
of USB and UFS devices until we re-visit this when we start seeing perf
issues on display/camera on upstream supported SDM845 platforms.
The bootloaders on these boards implement secure monitor callbacks to
handle a specific command - QCOM_SCM_SVC_SMMU_PROGRAM with which the
logic can be toggled.
There are other boards such as cheza whose bootloaders don't enable this
logic. Such boards don't implement callbacks to handle the specific SCM
call so disabling this logic for such boards will be a no-op.
This change is inspired by the downstream change from Patrick Daly
to address performance issues with display and camera by handling
this wait-for-safe within separte io-pagetable ops to do TLB
maintenance. So a big thanks to him for the change and for all the
offline discussions.
Without this change the UFS reads are pretty slow:
$ time dd if=/dev/sda of=/dev/zero bs=1048576 count=10 conv=sync
10+0 records in
10+0 records out
10485760 bytes (10.0MB) copied, 22.394903 seconds, 457.2KB/s
real 0m 22.39s
user 0m 0.00s
sys 0m 0.01s
With this change they are back to rock!
$ time dd if=/dev/sda of=/dev/zero bs=1048576 count=300 conv=sync
300+0 records in
300+0 records out
314572800 bytes (300.0MB) copied, 1.030541 seconds, 291.1MB/s
real 0m 1.03s
user 0m 0.00s
sys 0m 0.54s
Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Will Deacon <will@kernel.org>
When games, browser, or anything using a lot of GPU buffers exits, there
can be many hundreds or thousands of buffers to unmap and free. If the
GPU is otherwise suspended, this can cause arm-smmu to resume/suspend
for each buffer, resulting 5-10 seconds worth of reprogramming the
context bank (arm_smmu_write_context_bank()/arm_smmu_write_s2cr()/etc).
To the user it would appear that the system just locked up.
A simple solution is to use pm_runtime_put_autosuspend() instead, so we
don't immediately suspend the SMMU device.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Will Deacon <will@kernel.org>
Remove the variable of return. Issue found by
coccicheck(scripts/coccinelle/misc/returnvar.cocci)
Signed-off-by: Cristiane Naves <cristianenavescardoso09@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Non-Transparent Bridge (NTB) devices (among others) may have many DMA
aliases seeing the hardware will send requests with different device ids
depending on their origin across the bridged hardware.
See commit ad281ecf1c ("PCI: Add DMA alias quirk for Microsemi Switchtec
NTB") for more information on this.
The AMD IOMMU IRQ remapping functionality ignores all PCI aliases for
IRQs so if devices send an interrupt from one of their aliases they
will be blocked on AMD hardware with the IOMMU enabled.
To fix this, ensure IRQ remapping is enabled for all aliases with
MSI interrupts.
This is analogous to the functionality added to the Intel IRQ remapping
code in commit 3f0c625c6a ("iommu/vt-d: Allow interrupts from the entire
bus for aliased devices")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Non-Transparent Bridge (NTB) devices (among others) may have many DMA
aliases seeing the hardware will send requests with different device ids
depending on their origin across the bridged hardware.
See commit ad281ecf1c ("PCI: Add DMA alias quirk for Microsemi
Switchtec NTB") for more information on this.
The AMD IOMMU ignores all the PCI aliases except the last one so DMA
transfers from these aliases will be blocked on AMD hardware with the
IOMMU enabled.
To fix this, ensure the DTEs are cloned for every PCI alias. This is
done by copying the DTE data for each alias as well as the IVRS alias
every time it is changed.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Acer Aspire A315-41 requires the very same workaround as the existing
quirk for Dell Latitude 5495. Add the new entry for that.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1137799
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
platform_get_irq() will call dev_err() itself on failure,
so there is no need for the driver to also do this.
This is detected by coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
- fix a regression in the intel-iommu get_required_mask conversion
(Arvind Sankar)
-----BEGIN PGP SIGNATURE-----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=jbwS
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.4-2' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
"Fix a regression in the intel-iommu get_required_mask conversion
(Arvind Sankar)"
* tag 'dma-mapping-5.4-2' of git://git.infradead.org/users/hch/dma-mapping:
iommu/vt-d: Return the correct dma mask when we are bypassing the IOMMU
We must return a mask covering the full physical RAM when bypassing the
IOMMU mapping. Also, in iommu_need_mapping, we need to check using
dma_direct_get_required_mask to ensure that the device's dma_mask can
cover physical RAM before deciding to bypass IOMMU mapping.
Based on an earlier patch from Christoph Hellwig.
Fixes: 249baa5479 ("dma-mapping: provide a better default ->get_required_mask")
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The increase_address_space() function has to check the PM_LEVEL_SIZE()
condition again under the domain->lock to avoid a false trigger of the
WARN_ON_ONCE() and to avoid that the address space is increase more
often than necessary.
Reported-by: Qian Cai <cai@lca.pw>
Fixes: 754265bcab ("iommu/amd: Fix race in increase_address_space()")
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Page tables that reside in physical memory beyond the 4 GiB boundary are
currently not working properly. The reason is that when the physical
address for page directory entries is read, it gets truncated at 32 bits
and can cause crashes when passing that address to the DMA API.
Fix this by first casting the PDE value to a dma_addr_t and then using
the page frame number mask for the SMMU instance to mask out the invalid
bits, which are typically used for mapping attributes, etc.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use PTB_ASID instead of SMMU_CONFIG to flush smmu.
PTB_ASID can be accessed from non-secure mode, SMMU_CONFIG cannot be.
Using SMMU_CONFIG could pose a problem when kernel doesn't have secure
mode access enabled from boot.
Signed-off-by: Navneet Kumar <navneetk@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A recent commit added a gfp parameter to amd_iommu_map() to make it
callable from atomic context, but forgot to pass it down to
iommu_map_page() and left GFP_KERNEL there. This caused
sleep-while-atomic warnings and needs to be fixed.
Reported-by: Qian Cai <cai@lca.pw>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 781ca2de89 ("iommu: Add gfp parameter to iommu_ops::map")
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IOMMU domain resource life is well-defined, managed
by .domain_alloc and .domain_free.
Therefore, domain-specific resources shouldn't be tied to
the device life, but instead to its domain.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Previously intel-iommu.c depended on CONFIG_AMD_IOMMU in an undesirable
way. When CONFIG_INTEL_IOMMU_SVM=y, iommu_enable_dev_iotlb() calls PRI
interfaces (pci_reset_pri() and pci_enable_pri()), but those are only
implemented when CONFIG_PCI_PRI is enabled.
The INTEL_IOMMU_SVM Kconfig did nothing with PCI_PRI, but AMD_IOMMU selects
PCI_PRI. So if AMD_IOMMU was enabled, intel-iommu.c got the full PRI
interfaces, but if AMD_IOMMU was not enabled, it got the PRI stubs.
Make the iommu_enable_dev_iotlb() behavior independent of AMD_IOMMU by
having INTEL_IOMMU_SVM select PCI_PRI so iommu_enable_dev_iotlb() always
uses the full implementations of PRI interfaces.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
IOMMU Event Log encodes 20-bit PASID for events:
ILLEGAL_DEV_TABLE_ENTRY
IO_PAGE_FAULT
PAGE_TAB_HARDWARE_ERROR
INVALID_DEVICE_REQUEST
as:
PASID[15:0] = bit 47:32
PASID[19:16] = bit 19:16
Note that INVALID_PPR_REQUEST event has different encoding
from the rest of the events as the following:
PASID[15:0] = bit 31:16
PASID[19:16] = bit 45:42
So, fixes the decoding logic.
Fixes: d64c0486ed ("iommu/amd: Update the PASID information printed to the system log")
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Guest shared virtual address (SVA) may require host to shadow guest
PASID tables. Guest PASID can also be allocated from the host via
enlightened interfaces. In this case, guest needs to bind the guest
mm, i.e. cr3 in guest physical address to the actual PASID table in
the host IOMMU. Nesting will be turned on such that guest virtual
address can go through a two level translation:
- 1st level translates GVA to GPA
- 2nd level translates GPA to HPA
This patch introduces APIs to bind guest PASID data to the assigned
device entry in the physical IOMMU. See the diagram below for usage
explanation.
.-------------. .---------------------------.
| vIOMMU | | Guest process mm, FL only |
| | '---------------------------'
.----------------/
| PASID Entry |--- PASID cache flush -
'-------------' |
| | V
| | GP
'-------------'
Guest
------| Shadow |----------------------- GP->HP* ---------
v v |
Host v
.-------------. .----------------------.
| pIOMMU | | Bind FL for GVA-GPA |
| | '----------------------'
.----------------/ |
| PASID Entry | V (Nested xlate)
'----------------\.---------------------.
| | |Set SL to GPA-HPA |
| | '---------------------'
'-------------'
Where:
- FL = First level/stage one page tables
- SL = Second level/stage two page tables
- GP = Guest PASID
- HP = Host PASID
* Conversion needed if non-identity GP-HP mapping option is chosen.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IOASID allocation may rely on platform specific methods. One use case is
that when running in the guest, in order to obtain system wide global
IOASIDs, emulated allocation interface is needed to communicate with the
host. Here we call these platform specific allocators custom allocators.
Custom IOASID allocators can be registered at runtime and take precedence
over the default XArray allocator. They have these attributes:
- provides platform specific alloc()/free() functions with private data.
- allocation results lookup are not provided by the allocator, lookup
request must be done by the IOASID framework by its own XArray.
- allocators can be unregistered at runtime, either fallback to the next
custom allocator or to the default allocator.
- custom allocators can share the same set of alloc()/free() helpers, in
this case they also share the same IOASID space, thus the same XArray.
- switching between allocators requires all outstanding IOASIDs to be
freed unless the two allocators share the same alloc()/free() helpers.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lkml.org/lkml/2019/4/26/462
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some devices might support multiple DMA address spaces, in particular
those that have the PCI PASID feature. PASID (Process Address Space ID)
allows to share process address spaces with devices (SVA), partition a
device into VM-assignable entities (VFIO mdev) or simply provide
multiple DMA address space to kernel drivers. Add a global PASID
allocator usable by different drivers at the same time. Name it I/O ASID
to avoid confusion with ASIDs allocated by arch code, which are usually
a separate ID space.
The IOASID space is global. Each device can have its own PASID space,
but by convention the IOMMU ended up having a global PASID space, so
that with SVA, each mm_struct is associated to a single PASID.
The allocator is primarily used by IOMMU subsystem but in rare occasions
drivers would like to allocate PASIDs for devices that aren't managed by
an IOMMU, using the same ID space as IOMMU.
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In any virtualization use case, when the first translation stage
is "owned" by the guest OS, the host IOMMU driver has no knowledge
of caching structure updates unless the guest invalidation activities
are trapped by the virtualizer and passed down to the host.
Since the invalidation data can be obtained from user space and will be
written into physical IOMMU, we must allow security check at various
layers. Therefore, generic invalidation data format are proposed here,
model specific IOMMU drivers need to convert them into their own format.
Signed-off-by: Yi L Liu <yi.l.liu@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
As platform_get_irq() now prints an error when the interrupt does not
exist, calling it gratuitously causes scary messages like:
ipmmu-vmsa e6740000.mmu: IRQ index 0 not found
Fix this by moving the call to platform_get_irq() down, where the
existence of the interrupt is mandatory.
Fixes: 7723f4c5ec ("driver core: platform: Add an error message to platform_get_irq*()")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Till now the Rockchip iommu driver walked through the irq list via
platform_get_irq() until it encountered an ENXIO error. With the
recent change to add a central error message, this always results
in such an error for each iommu on probe and shutdown.
To not confuse people, switch to platform_count_irqs() to get the
actual number of interrupts before walking through them.
Fixes: 7723f4c5ec ("driver core: platform: Add an error message to platform_get_irq*()")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Since we have a generic helper, drop custom implementation in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Current find_domain() helper checks and does the deferred domain
attachment and return the domain in use. This isn't always the
use case for the callers. Some callers only want to retrieve the
current domain in use.
This refactors find_domain() into two helpers: 1) find_domain()
only returns the domain in use; 2) deferred_attach_domain() does
the deferred domain attachment if required and return the domain
in use.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
'iommu_group_get_for_dev()' never returns NULL, so this test can be
simplified a bit.
This way, the test is consistent with all other calls to
'iommu_group_get_for_dev()'.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert the AMD iommu driver to the dma-iommu api. Remove the iova
handling and reserve region code from the AMD iommu driver.
Signed-off-by: Tom Murphy <murphyt7@tcd.ie>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use the dev->coherent_dma_mask when allocating in the dma-iommu ops api.
Signed-off-by: Tom Murphy <murphyt7@tcd.ie>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Handle devices which defer their attach to the iommu in the dma-iommu api
Signed-off-by: Tom Murphy <murphyt7@tcd.ie>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add a gfp_t parameter to the iommu_ops::map function.
Remove the needless locking in the AMD iommu driver.
The iommu_ops::map function (or the iommu_map function which calls it)
was always supposed to be sleepable (according to Joerg's comment in
this thread: https://lore.kernel.org/patchwork/patch/977520/ ) and so
should probably have had a "might_sleep()" since it was written. However
currently the dma-iommu api can call iommu_map in an atomic context,
which it shouldn't do. This doesn't cause any problems because any iommu
driver which uses the dma-iommu api uses gfp_atomic in it's
iommu_ops::map function. But doing this wastes the memory allocators
atomic pools.
Signed-off-by: Tom Murphy <murphyt7@tcd.ie>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
With or without locking it doesn't make sense for two writers to be
writing to the same IOVA range at the same time. Even with locking we
still have a race condition, whoever gets the lock first, so we still
can't be sure what the result will be. With locking the result will be
more sane, it will be correct for the last writer, but still useless
because we can't be sure which writer will get the lock last. It's a
fundamentally broken design to have two writers writing to the same
IOVA range at the same time.
So we can remove the locking and work on the assumption that no two
writers will be writing to the same IOVA range at the same time.
The only exception is when we have to allocate a middle page in the page
tables, the middle page can cover more than just the IOVA range a writer
has been allocated. However this isn't an issue in the AMD driver
because it can atomically allocate middle pages using "cmpxchg64()".
Signed-off-by: Tom Murphy <murphyt7@tcd.ie>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
'iommu_group_get_for_dev()' never returns NULL, so this test can be removed.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Will Deacon <will@kernel.org>
The memory used by '__init' functions can be freed once the initialization
phase has been performed.
Mark some 'static const' array defined and used within some '__init'
functions as '__initconst', so that the corresponding data can also be
discarded.
Without '__initconst', the data are put in the .rodata section.
With the qualifier, they are put in the .init.rodata section.
With gcc 8.3.0, the following changes have been measured:
Without '__initconst':
section size
.rodata 00000720
.init.rodata 00000018
With '__initconst':
section size
.rodata 00000660
.init.rodata 00000058
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Will Deacon <will@kernel.org>
Although CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT is a welcome tool
for smoking out inadequate firmware, the failure mode is non-obvious
and can be confusing for end users. Add some special-case reporting of
Unidentified Stream Faults to help clarify this particular symptom.
Since we're adding yet another print to the mix, also break out an
explicit ratelimit state to make sure everything stays together (and
reduce the static storage footprint a little).
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
With the .tlb_sync interface no longer exposed directly to io-pgtable,
strip away the remains of that abstraction layer. Retain the callback
in spirit, though, by transforming it into an implementation override
for the low-level sync routine itself, for which we will have at least
one user.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Now that the "leaf" flag is no longer part of an external interface,
there's no need to use it to infer a register offset at runtime when
we can just as easily encode the offset directly in its place.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Fill in 'native' iommu_flush_ops callbacks for all the
arm_smmu_flush_ops variants, and clear up the remains of the previous
.tlb_inv_range abstraction.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
In principle, Midgard GPUs supporting smaller VA sizes should only
require 3-level pagetables, since level 0 only resolves bits 48:40 of
the address. However, the kbase driver does not appear to have any
notion of a variable start level, and empirically T720 and T820 rapidly
blow up with translation faults unless given a full 4-level table,
despite only supporting a 33-bit VA size.
The 'real' IAS value is still valuable in terms of validating addresses
on map/unmap, so tweak the allocator to allow smaller values while still
forcing the resultant tables to the full 4 levels. As far as I can test,
this should make all known Midgard variants happy.
Fixes: d08d42de64 ("iommu: io-pgtable: Add ARM Mali midgard MMU page table format")
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Whilst Midgard's MEMATTR follows a similar principle to the VMSA MAIR,
the actual attribute values differ, so although it currently appears to
work to some degree, we probably shouldn't be using our standard stage 1
MAIR for that. Instead, generate a reasonable MEMATTR with attribute
values borrowed from the kbase driver; at this point we'll be overriding
or ignoring pretty much all of the LPAE config, so just implement these
Mali details in a dedicated allocator instead of pretending to subclass
the standard VMSA format.
Fixes: d08d42de64 ("iommu: io-pgtable: Add ARM Mali midgard MMU page table format")
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
When alloc_io_pgtable_ops is failed, context bitmap which is just allocated
by __arm_smmu_alloc_bitmap should be freed to release the resource.
Signed-off-by: Liu Xiang <liuxiang_1999@126.com>
Signed-off-by: Will Deacon <will@kernel.org>
A couple of fixes for the AMD IOMMU driver have piled up:
* Some fixes for the reworked IO page-table which caused memory
leaks or did not allow to downgrade mappings under some
conditions.
* Locking fixes to fix a couple of possible races around
accessing 'struct protection_domain'. The races got introduced
when the dma-ops path became lock-less in the fast-path.
-----BEGIN PGP SIGNATURE-----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=xajX
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
"A couple of fixes for the AMD IOMMU driver have piled up:
- Some fixes for the reworked IO page-table which caused memory leaks
or did not allow to downgrade mappings under some conditions.
- Locking fixes to fix a couple of possible races around accessing
'struct protection_domain'. The races got introduced when the
dma-ops path became lock-less in the fast-path"
* tag 'iommu-fixes-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Lock code paths traversing protection_domain->dev_list
iommu/amd: Lock dev_data in attach/detach code paths
iommu/amd: Check for busy devices earlier in attach_device()
iommu/amd: Take domain->lock for complete attach/detach path
iommu/amd: Remove amd_iommu_devtable_lock
iommu/amd: Remove domain->updated
iommu/amd: Wait for completion of IOTLB flush in attach_device
iommu/amd: Unmap all L7 PTEs when downgrading page-sizes
iommu/amd: Introduce first_pte_l7() helper
iommu/amd: Fix downgrading default page-sizes in alloc_pte()
iommu/amd: Fix pages leak in free_pagetable()
The traversing of this list requires protection_domain->lock to be taken
to avoid nasty races with attach/detach code. Make sure the lock is held
on all code-paths traversing this list.
Reported-by: Filippo Sironi <sironi@amazon.de>
Fixes: 92d420ec02 ("iommu/amd: Relax locking in dma_ops path")
Reviewed-by: Filippo Sironi <sironi@amazon.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Make sure that attaching a detaching a device can't race against each
other and protect the iommu_dev_data with a spin_lock in these code
paths.
Fixes: 92d420ec02 ("iommu/amd: Relax locking in dma_ops path")
Reviewed-by: Filippo Sironi <sironi@amazon.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Check early in attach_device whether the device is already attached to a
domain. This also simplifies the code path so that __attach_device() can
be removed.
Fixes: 92d420ec02 ("iommu/amd: Relax locking in dma_ops path")
Reviewed-by: Filippo Sironi <sironi@amazon.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The code-paths before __attach_device() and __detach_device() are called
also access and modify domain state, so take the domain lock there too.
This allows to get rid of the __detach_device() function.
Fixes: 92d420ec02 ("iommu/amd: Relax locking in dma_ops path")
Reviewed-by: Filippo Sironi <sironi@amazon.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The lock is not necessary because the device table does not
contain shared state that needs protection. Locking is only
needed on an individual entry basis, and that needs to
happen on the iommu_dev_data level.
Fixes: 92d420ec02 ("iommu/amd: Relax locking in dma_ops path")
Reviewed-by: Filippo Sironi <sironi@amazon.de>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Adrian Huang
Lu Baolu
Jacob Pan
Christoph Hellwig
Joerg Roedel
Thierry Reding
Qian Cai
Krzysztof Kozlowski
Suravee Suthikulpanit
Adrian Huang
Will Deacon
Ard Biesheuvel
Linus Torvalds
James Sewart
Robin Murphy
Jerry Snitselaar
Alex Williamson
Xiaotao Yin
Eric Auger
Bjorn Helgaas
Rafael J. Wysocki
Boqun Feng
Nicolas Saenz Julienne
Krzysztof Wilczynski
Deepa Dinamani
Yian Chen
Jean-Philippe Brucker
Yoshihiro Shimoda
Yong Wu
Vivek Gautam
Rob Clark
Cristiane Naves
Logan Gunthorpe
John Donnelly
Takashi Iwai
Denys Vlasenko
YueHaibing
Arvind Sankar
Navneet Kumar
Ezequiel Garcia
Jean-Philippe Brucker
Yi L Liu
Geert Uytterhoeven
Biju Das
Heiko Stuebner
Andy Shevchenko
Christophe JAILLET
Tom Murphy
Liu Xiang