The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:
rk3399-rockpro64.dtb: panel@0: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'
There is only one endpoint, so use simpler form without "reg".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230326204520.80859-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Pine64 touch panel is a panel consisting of the Feiyang fy07024di26a30d
panel with a Goodix gt911 touch screen. Add the device tree nodes to the
rockpro64 to permit attaching this display to the device.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20220511113517.4172962-4-pgwipeout@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The supply-name for pwm-regualators is "pwm", so the property
needs to be pwm-supply, not vin-supply as in a number of boards.
In all cases changed here, the supplying regulator is always
an always-on fixed-regulator, so there will be no functional
change and only a change in the regulator hirarchy, as can be seen
for example in the regulator-summary.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20211227234529.1970281-2-heiko@sntech.de
The rockpro64 had a fan node since
commit 5882d65c16 ("arm64: dts: rockchip: Add PWM fan for RockPro64")
however it was never tied into the thermal driver for automatic control.
Add the links to the thermal node to permit the kernel to handle this
automatically.
Borrowed from the (rk3399-khadas-edge.dtsi).
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20210730151727.729822-1-pgwipeout@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
As suggested by Arnd Bergmann, the newly added mmc aliases
should be board specific, so move them from the general dtsi
to the individual boards.
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20210324122235.1059292-7-heiko@sntech.de
This adds the RockPro64’s infrared receiver to its dtsi. The configuration is
almost the same as on rk3328-rock64, except for the GPIO pins, and thus adapted
from there.
Signed-off-by: Thomas Schneider <qsx@chaotikum.eu>
Link: https://lore.kernel.org/r/20210310122821.126408-1-qsx@chaotikum.eu
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch changes device name to more user friendly name of
Analog and SPDIF sound nodes for rk3399-rockpro64.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20210110151913.3615326-1-katsuhiro@katsuster.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch adds 'disabled' SPDIF sound node and related settings
for rk3399-rockpro64.
There are 2 reasons:
- All RK3399 dma-bus channels have been already used by I2S0/1/2
- RockPro64 does not have SPDIF optical nor coaxial connector,
just have 3pins
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20200810091619.3170534-1-katsuhiro@katsuster.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Current dts files with 'gpio-led' nodes were manually verified.
In order to automate this process leds-gpio.txt
has been converted to yaml. With this conversion a check
for pattern properties was added. In part 2 rename and label
gpio-led subnodes that passed the regex, but still don't have
the preferred form. Any pin subnode that ends with '-gpio'
in the pinctrl node generates a warning.
Fix with help of the following rules:
1: Add nodename in the preferred form.
2: Always add a label that ends with '_led' to prevent conflicts
with other labels such as 'power' and 'mmc'
3: If leds need pinctrl add a label that ends with '_led_pin'
also to prevent conflicts with other labels.
patternProperties:
# The first form is preferred, but fall back to just 'led'
# anywhere in the node name to at least catch some child nodes.
"(^led-[0-9a-f]$|led)":
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/leds/
leds-gpio.yaml
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/
schemas/gpio/gpio.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200522154657.9472-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
A test with the command below gives for example this error:
arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dt.yaml:
tsadc: tsadc-otp-gpio:
{'phandle': [[90]], 'rockchip,pins': [[0, 6, 0, 123]]}
is not of type 'array'
'gpio' is a sort of reserved nodename and should not be used
for pinctrl in combination with 'rockchip,pins', so change
nodes that end with 'gpio' to end with 'pin' or 'pins'.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/
dtschema/schemas/gpio/gpio.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200524160636.16547-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The usb-c port on the rockpro64 does not detect devices reliably when in otg mode.
Setting the mode to "host" allows the port to work reliably.
This aligns with the pinebook-pro configuration.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20200614142950.1120694-1-pgwipeout@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch adds the RockPro64's micro SD card regulator to the
RockPro64 dtsi. The regulator is present on all revisions of the
device.
Previously the regular was missing, resulting in unreliable boot
behaviour when booting from SD card.
Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Link: https://lore.kernel.org/r/20200416145534.1263575-1-t.schramm@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
With enabled wifi support (required for firmware loading) for the
Ampak AP6359SA based wifi/bt combo module we now also can enable
the bluetooth part.
Suggested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Soeren Moch <smoch@web.de>
Link: https://lore.kernel.org/r/20191218223523.30154-3-smoch@web.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
RockPro64 supports an Ampak AP6359SA based wifi/bt combo module.
The BCM4359/9 wifi controller in this module is connected to sdio0,
enable this interface.
Use the in-band sdio irq instead of the out-of-band wifi_host_wake_l
signal since the latter is not working reliably on this board (probably
due to it's PCIe WAKE# connection).
Signed-off-by: Soeren Moch <smoch@web.de>
Link: https://lore.kernel.org/r/20191218223523.30154-2-smoch@web.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch splits rk3399-rockpro64 dts file to 2 files for v2 and
v2.1 boards.
Both v2 and v2.1 boards can use almost same settings but we find a
difference in I2C address of audio CODEC ES8136.
Reported-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20191202055929.26540-1-katsuhiro@katsuster.net
[put pine64,rockpro64-v2.* into an enum]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Krzysztof Kozlowski
Peter Geis
Heiko Stuebner
Heiko Stuebner
Thomas Schneider
Katsuhiro Suzuki
Johan Jonker
Tobias Schramm
Soeren Moch