Commit 52bda69ae8 ("powerpc/fsl_booke: Tell map_mem_in_cams() if
init is done") was supposed to just add an additional parameter to
map_mem_in_cams() and always set it to 'true' at that time.
But a few call sites were messed up. Fix them.
Fixes: 52bda69ae8 ("powerpc/fsl_booke: Tell map_mem_in_cams() if init is done")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d319f2a9367d4d08fd2154e506101bd5f100feeb.1636967119.git.christophe.leroy@csgroup.eu
In case the FORM2 distance table from firmware is not the expected size,
there is fallback code that just populates the lookup table as local vs
remote.
However it then continues on to use the distance table. Fix.
Fixes: 1c6b5a7e74 ("powerpc/pseries: Add support for FORM2 associativity")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211109064900.2041386-2-npiggin@gmail.com
The name of the local variable holding the "form2" property address
conflicts with the numa_distance_table global.
This patch does 's/numa_dist_table/form2_distances/g' over the function,
which also renames numa_dist_table_length to form2_distances_length.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211109064900.2041386-1-npiggin@gmail.com
Merge more updates from Andrew Morton:
"87 patches.
Subsystems affected by this patch series: mm (pagecache and hugetlb),
procfs, misc, MAINTAINERS, lib, checkpatch, binfmt, kallsyms, ramfs,
init, codafs, nilfs2, hfs, crash_dump, signals, seq_file, fork,
sysvfs, kcov, gdb, resource, selftests, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (87 commits)
ipc/ipc_sysctl.c: remove fallback for !CONFIG_PROC_SYSCTL
ipc: check checkpoint_restore_ns_capable() to modify C/R proc files
selftests/kselftest/runner/run_one(): allow running non-executable files
virtio-mem: disallow mapping virtio-mem memory via /dev/mem
kernel/resource: disallow access to exclusive system RAM regions
kernel/resource: clean up and optimize iomem_is_exclusive()
scripts/gdb: handle split debug for vmlinux
kcov: replace local_irq_save() with a local_lock_t
kcov: avoid enable+disable interrupts if !in_task()
kcov: allocate per-CPU memory on the relevant node
Documentation/kcov: define `ip' in the example
Documentation/kcov: include types.h in the example
sysv: use BUILD_BUG_ON instead of runtime check
kernel/fork.c: unshare(): use swap() to make code cleaner
seq_file: fix passing wrong private data
seq_file: move seq_escape() to a header
signal: remove duplicate include in signal.h
crash_dump: remove duplicate include in crash_dump.h
crash_dump: fix boolreturn.cocci warning
hfs/hfsplus: use WARN_ON for sanity check
...
Merge misc updates from Andrew Morton:
"257 patches.
Subsystems affected by this patch series: scripts, ocfs2, vfs, and
mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache,
gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc,
pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools,
memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm,
vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram,
cleanups, kfence, and damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits)
mm/damon: remove return value from before_terminate callback
mm/damon: fix a few spelling mistakes in comments and a pr_debug message
mm/damon: simplify stop mechanism
Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions
Docs/admin-guide/mm/damon/start: simplify the content
Docs/admin-guide/mm/damon/start: fix a wrong link
Docs/admin-guide/mm/damon/start: fix wrong example commands
mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on
mm/damon: remove unnecessary variable initialization
Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM
mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM)
selftests/damon: support watermarks
mm/damon/dbgfs: support watermarks
mm/damon/schemes: activate schemes based on a watermarks mechanism
tools/selftests/damon: update for regions prioritization of schemes
mm/damon/dbgfs: support prioritization weights
mm/damon/vaddr,paddr: support pageout prioritization
mm/damon/schemes: prioritize regions within the quotas
mm/damon/selftests: support schemes quotas
mm/damon/dbgfs: support quotas of schemes
...
We can specify the number of hugepages to allocate at boot. But the
hugepages is balanced in all nodes at present. In some scenarios, we
only need hugepages in one node. For example: DPDK needs hugepages
which are in the same node as NIC.
If DPDK needs four hugepages of 1G size in node1 and system has 16 numa
nodes we must reserve 64 hugepages on the kernel cmdline. But only four
hugepages are used. The others should be free after boot. If the
system memory is low(for example: 64G), it will be an impossible task.
So extend the hugepages parameter to support specifying hugepages on a
specific node. For example add following parameter:
hugepagesz=1G hugepages=0:1,1:3
It will allocate 1 hugepage in node0 and 3 hugepages in node1.
Link: https://lkml.kernel.org/r/20211005054729.86457-1-yaozhenguo1@gmail.com
Signed-off-by: Zhenguo Yao <yaozhenguo1@gmail.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zhenguo Yao <yaozhenguo1@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When ARCH_SUPPORTS_DEBUG_PAGEALLOC is not selected, the user can
still select CONFIG_DEBUG_PAGEALLOC in which case __kernel_map_pages()
is provided by mm/page_poison.c
So only define __kernel_map_pages() when both
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC and CONFIG_DEBUG_PAGEALLOC
are defined.
Fixes: 68b44f94d6 ("powerpc/booke: Disable STRICT_KERNEL_RWX, DEBUG_PAGEALLOC and KFENCE")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/971b69739ff4746252e711a9845210465c023a9e.1635425947.git.christophe.leroy@csgroup.eu
Building tqm8541_defconfig results in:
arch/powerpc/mm/nohash/fsl_book3e.c: In function 'settlbcam':
arch/powerpc/mm/nohash/fsl_book3e.c:126:40: error: '_PAGE_BAP_SX' undeclared (first use in this function)
126 | TLBCAM[index].MAS3 |= (flags & _PAGE_BAP_SX) ? MAS3_SX : 0;
| ^~~~~~~~~~~~
arch/powerpc/mm/nohash/fsl_book3e.c:126:40: note: each undeclared identifier is reported only once for each function it appears in
make[3]: *** [scripts/Makefile.build:277: arch/powerpc/mm/nohash/fsl_book3e.o] Error 1
make[2]: *** [scripts/Makefile.build:540: arch/powerpc/mm/nohash] Error 2
make[1]: *** [scripts/Makefile.build:540: arch/powerpc/mm] Error 2
make: *** [Makefile:1868: arch/powerpc] Error 2
This is because _PAGE_BAP_SX is not defined when using 32 bits PTE.
Now that _PAGE_EXEC contains both _PAGE_BAP_SX and _PAGE_BAP_UX, it can be used instead.
Fixes: 01116e6e98 ("powerpc/fsl_booke: Take exec flag into account when setting TLBCAMs")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/91a0235e7f2a85308b84aa5b9efd8d022e2b899a.1635226743.git.christophe.leroy@csgroup.eu
set_memory_x() calls pte_mkexec() which sets _PAGE_EXEC.
set_memory_nx() calls pte_exprotec() which clears _PAGE_EXEC.
Book3e has 2 bits, UX and SX, which defines the exec rights
resp. for user (PR=1) and for kernel (PR=0).
_PAGE_EXEC is defined as UX only.
An executable kernel page is set with either _PAGE_KERNEL_RWX
or _PAGE_KERNEL_ROX, which both have SX set and UX cleared.
So set_memory_nx() call for an executable kernel page does
nothing because UX is already cleared.
And set_memory_x() on a non-executable kernel page makes it
executable for the user and keeps it non-executable for kernel.
Also, pte_exec() always returns 'false' on kernel pages, because
it checks _PAGE_EXEC which doesn't include SX, so for instance
the W+X check doesn't work.
To fix this:
- change tlb_low_64e.S to use _PAGE_BAP_UX instead of _PAGE_USER
- sets both UX and SX in _PAGE_EXEC so that pte_exec() returns
true whenever one of the two bits is set and pte_exprotect()
clears both bits.
- Define a book3e specific version of pte_mkexec() which sets
either SX or UX based on UR.
Fixes: 1f9ad21c3b ("powerpc/mm: Implement set_memory() routines")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c41100f9c144dc5b62e5a751b810190c6b5d42fd.1635226743.git.christophe.leroy@csgroup.eu
Long time ago we had a config item called STRICT_MM_TYPECHECKS
to build the kernel with pte_t defined as a structure in order
to perform additional build checks or build it with pte_t
defined as a simple type in order to get simpler generated code.
Commit 670eea9241 ("powerpc/mm: Always use STRICT_MM_TYPECHECKS")
made the struct based definition the only one, considering that the
generated code was similar in both cases.
That's right on ppc64 because the ABI is such that the content of a
struct having a single simple type element is passed as register,
but on ppc32 such a structure is passed via the stack like any
structure.
Simple test function:
pte_t test(pte_t pte)
{
return pte;
}
Before this patch we get
c00108ec <test>:
c00108ec: 81 24 00 00 lwz r9,0(r4)
c00108f0: 91 23 00 00 stw r9,0(r3)
c00108f4: 4e 80 00 20 blr
So, for PPC32, restore the simple type behaviour we got before
commit 670eea9241, but instead of adding a config option to
activate type check, do it when __CHECKER__ is set so that type
checking is performed by 'sparse' and provides feedback like:
arch/powerpc/mm/pgtable.c:466:16: warning: incorrect type in return expression (different base types)
arch/powerpc/mm/pgtable.c:466:16: expected unsigned long
arch/powerpc/mm/pgtable.c:466:16: got struct pte_t [usertype] x
With this patch we now get
c0010890 <test>:
c0010890: 4e 80 00 20 blr
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Define STRICT_MM_TYPECHECKS rather than repeating the condition]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c904599f33aaf6bb7ee2836a9ff8368509e0d78d.1631887042.git.christophe.leroy@csgroup.eu
Reorganise TLBCAM allocation so that when STRICT_KERNEL_RWX is
enabled, TLBCAMs are allocated such that readonly memory uses
different TLBCAMs.
This results in an allocation looking like:
Memory CAM mapping: 4/4/4/1/1/1/1/16/16/16/64/64/64/256/256 Mb, residual: 256Mb
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8ca169bc288261a0e0558712f979023c3a960ebb.1634292136.git.christophe.leroy@csgroup.eu
Avoid switching to AS1 when reloading TLBCAM after init for
STRICT_KERNEL_RWX.
When we setup AS1 we expect the entire accessible memory to be mapped
through one entry, this is not the case anymore at the end of init.
We are not changing the size of TLBCAMs, only flags, so no need to
switch to AS1.
So change loadcam_multi() to not switch to AS1 when the given
temporary tlb entry in 0.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a9d517fbfbc940f56103c46b323f6eb8f4485571.1634292136.git.christophe.leroy@csgroup.eu
Don't force MAS3_SX and MAS3_UX at all time. Take into account the
exec flag.
While at it, fix a couple of closeby style problems (indent with space
and unnecessary parenthesis), it keeps more readability.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5467044e59f27f9fcf709b9661779e3ce5f784f6.1634292136.git.christophe.leroy@csgroup.eu
We have a myriad of CONFIG symbols around different variants
of BOOKEs, which would be worth tidying up one day.
But at least, make file names and CONFIG option match:
We have CONFIG_FSL_BOOKE and CONFIG_PPC_FSL_BOOK3E.
fsl_booke.c is selected by and only by CONFIG_PPC_FSL_BOOK3E.
So rename it fsl_book3e to reduce confusion.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5dc871db1f67739319bec11f049ca450da1c13a2.1634292136.git.christophe.leroy@csgroup.eu
The page_alloc.c code will call into __kernel_map_pages() when
DEBUG_PAGEALLOC is configured and enabled.
As the implementation assumes hash, this should crash spectacularly if
not for a bit of luck in __kernel_map_pages(). In this function
linear_map_hash_count is always zero, the for loop exits without doing
any damage.
There are no other platforms that determine if they support
debug_pagealloc at runtime. Instead of adding code to mm/page_alloc.c to
do that, this change turns the map/unmap into a noop when in radix
mode and prints a warning once.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Reformat if per Christophe's suggestion]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211013213438.675095-1-joel@jms.id.au
max_mapnr is used by virt_addr_valid() to check if a linear
address is valid.
It must only include lowmem PFNs, like other architectures.
Problem detected on a system with 1G mem (Only 768M are mapped), with
CONFIG_DEBUG_VIRTUAL and CONFIG_TEST_DEBUG_VIRTUAL, it didn't report
virt_to_phys(VMALLOC_START), VMALLOC_START being 0xf1000000.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/77d99037782ac4b3c3b0124fc4ae80ce7b760b05.1634035228.git.christophe.leroy@csgroup.eu
Commit 8e11d62e2e ("powerpc/mem: Add back missing header to fix 'no
previous prototype' error") was supposed to fix the problem, but in
the meantime commit a927bd6ba9 ("mm: fix phys_to_target_node() and*
memory_add_physaddr_to_nid() exports") moved create_section_mapping()
prototype from asm/sparsemem.h to asm/mmzone.h
Fixes: 8e11d62e2e ("powerpc/mem: Add back missing header to fix 'no previous prototype' error")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/025754fde3d027904ae9d0191f395890bec93369.1631541649.git.christophe.leroy@csgroup.eu
Merge more updates from Andrew Morton:
"147 patches, based on 7d2a07b769.
Subsystems affected by this patch series: mm (memory-hotplug, rmap,
ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan),
alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib,
checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig,
selftests, ipc, and scripts"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits)
scripts: check_extable: fix typo in user error message
mm/workingset: correct kernel-doc notations
ipc: replace costly bailout check in sysvipc_find_ipc()
selftests/memfd: remove unused variable
Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH
configs: remove the obsolete CONFIG_INPUT_POLLDEV
prctl: allow to setup brk for et_dyn executables
pid: cleanup the stale comment mentioning pidmap_init().
kernel/fork.c: unexport get_{mm,task}_exe_file
coredump: fix memleak in dump_vma_snapshot()
fs/coredump.c: log if a core dump is aborted due to changed file permissions
nilfs2: use refcount_dec_and_lock() to fix potential UAF
nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group
nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group
nilfs2: fix NULL pointer in nilfs_##name##_attr_release
nilfs2: fix memory leak in nilfs_sysfs_create_device_group
trap: cleanup trap_init()
init: move usermodehelper_enable() to populate_rootfs()
...
- Convert pseries & powernv to use MSI IRQ domains.
- Rework the pseries CPU numbering so that CPUs that are removed, and later re-added, are
given a CPU number on the same node as previously, when possible.
- Add support for a new more flexible device-tree format for specifying NUMA distances.
- Convert powerpc to GENERIC_PTDUMP.
- Retire sbc8548 and sbc8641d board support.
- Various other small features and fixes.
Thanks to: Alexey Kardashevskiy, Aneesh Kumar K.V, Anton Blanchard, Cédric Le Goater,
Christophe Leroy, Emmanuel Gil Peyrot, Fabiano Rosas, Fangrui Song, Finn Thain, Gautham R.
Shenoy, Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Laurent Dufour, Leonardo
Bras, Lukas Bulwahn, Marc Zyngier, Masahiro Yamada, Michal Suchanek, Nathan Chancellor,
Nicholas Piggin, Parth Shah, Paul Gortmaker, Pratik R. Sampat, Randy Dunlap, Sebastian
Andrzej Siewior, Srikar Dronamraju, Wan Jiabing, Xiongwei Song, Zheng Yongjun.
-----BEGIN PGP SIGNATURE-----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=EbN0
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Convert pseries & powernv to use MSI IRQ domains.
- Rework the pseries CPU numbering so that CPUs that are removed, and
later re-added, are given a CPU number on the same node as
previously, when possible.
- Add support for a new more flexible device-tree format for specifying
NUMA distances.
- Convert powerpc to GENERIC_PTDUMP.
- Retire sbc8548 and sbc8641d board support.
- Various other small features and fixes.
Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Anton Blanchard,
Cédric Le Goater, Christophe Leroy, Emmanuel Gil Peyrot, Fabiano Rosas,
Fangrui Song, Finn Thain, Gautham R. Shenoy, Hari Bathini, Joel
Stanley, Jordan Niethe, Kajol Jain, Laurent Dufour, Leonardo Bras, Lukas
Bulwahn, Marc Zyngier, Masahiro Yamada, Michal Suchanek, Nathan
Chancellor, Nicholas Piggin, Parth Shah, Paul Gortmaker, Pratik R.
Sampat, Randy Dunlap, Sebastian Andrzej Siewior, Srikar Dronamraju, Wan
Jiabing, Xiongwei Song, and Zheng Yongjun.
* tag 'powerpc-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (154 commits)
powerpc/bug: Cast to unsigned long before passing to inline asm
powerpc/ptdump: Fix generic ptdump for 64-bit
KVM: PPC: Fix clearing never mapped TCEs in realmode
powerpc/pseries/iommu: Rename "direct window" to "dma window"
powerpc/pseries/iommu: Make use of DDW for indirect mapping
powerpc/pseries/iommu: Find existing DDW with given property name
powerpc/pseries/iommu: Update remove_dma_window() to accept property name
powerpc/pseries/iommu: Reorganize iommu_table_setparms*() with new helper
powerpc/pseries/iommu: Add ddw_property_create() and refactor enable_ddw()
powerpc/pseries/iommu: Allow DDW windows starting at 0x00
powerpc/pseries/iommu: Add ddw_list_new_entry() helper
powerpc/pseries/iommu: Add iommu_pseries_alloc_table() helper
powerpc/kernel/iommu: Add new iommu_table_in_use() helper
powerpc/pseries/iommu: Replace hard-coded page shift
powerpc/numa: Update cpu_cpu_map on CPU online/offline
powerpc/numa: Print debug statements only when required
powerpc/numa: convert printk to pr_xxx
powerpc/numa: Drop dbg in favour of pr_debug
powerpc/smp: Enable CACHE domain for shared processor
powerpc/smp: Update cpu_core_map on all PowerPc systems
...
Merge our fixes branch into next.
That lets us resolve a conflict in arch/powerpc/sysdev/xive/common.c.
Between cbc06f051c ("powerpc/xive: Do not skip CPU-less nodes when
creating the IPIs"), which moved request_irq() out of xive_init_ipis(),
and 17df41fec5 ("powerpc: use IRQF_NO_DEBUG for IPIs") which added
IRQF_NO_DEBUG to that request_irq() call, which has now moved.
Since the conversion to generic ptdump we see crashes on 64-bit:
BUG: Unable to handle kernel data access on read at 0xc0eeff7f00000000
Faulting instruction address: 0xc00000000045e5fc
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP __walk_page_range+0x2bc/0xce0
LR __walk_page_range+0x240/0xce0
Call Trace:
__walk_page_range+0x240/0xce0 (unreliable)
walk_page_range_novma+0x74/0xb0
ptdump_walk_pgd+0x98/0x170
ptdump_check_wx+0x88/0xd0
mark_rodata_ro+0x48/0x80
kernel_init+0x74/0x1a0
ret_from_kernel_thread+0x5c/0x64
What's happening is that have walked off the end of the kernel page
tables, and started dereferencing junk values.
That happens because we initialised the ptdump_range to span all the way
up to 0xffffffffffffffff:
static struct ptdump_range ptdump_range[] __ro_after_init = {
{TASK_SIZE_MAX, ~0UL},
But the kernel page tables don't span that far. So on 64-bit set the end
of the range to be the address immediately past the end of the kernel
page tables, to limit the page table walk to valid addresses.
Fixes: e084728393 ("powerpc/ptdump: Convert powerpc to GENERIC_PTDUMP")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210831135151.886620-1-mpe@ellerman.id.au
Currently, a debug message gets printed every time an attempt to
add(remove) a CPU. However this is redundant if the CPU is already added
(removed) from the node.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210826100521.412639-4-srikar@linux.vnet.ibm.com
Convert the remaining printk to pr_xxx
One advantage would be all prints will now have prefix "numa:" from
pr_fmt().
[ convert printk(KERN_ERR) to pr_warn : Suggested by Laurent Dufour ]
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
[mpe: Rebase onto powerpc/next, s/WARNING/Warning/]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210826100521.412639-3-srikar@linux.vnet.ibm.com
powerpc supported numa=debug which is not documented. This option was
used to print early debug output. However something more flexible can be
achieved by using CONFIG_DYNAMIC_DEBUG.
Hence drop dbg (and numa=debug) in favour of pr_debug
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
[mpe: Rebase on to powerpc/next form2 affinity changes]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210826100521.412639-2-srikar@linux.vnet.ibm.com
- Fix random crashes on some 32-bit CPUs by adding isync() after locking/unlocking KUEP
- Fix intermittent crashes when loading modules with strict module RWX
- Fix a section mismatch introduce by a previous fix.
Thanks to: Christophe Leroy, Fabiano Rosas, Laurent Vivier, Murilo Opsfelder Araújo,
Nathan Chancellor, Stan Johnson.
-----BEGIN PGP SIGNATURE-----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=K2B0
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix random crashes on some 32-bit CPUs by adding isync() after
locking/unlocking KUEP
- Fix intermittent crashes when loading modules with strict module RWX
- Fix a section mismatch introduce by a previous fix.
Thanks to Christophe Leroy, Fabiano Rosas, Laurent Vivier, Murilo
Opsfelder Araújo, Nathan Chancellor, and Stan Johnson.
h# -----BEGIN PGP SIGNATURE-----
* tag 'powerpc-5.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm: Fix set_memory_*() against concurrent accesses
powerpc/32s: Fix random crashes by adding isync() after locking/unlocking KUEP
powerpc/xive: Do not mark xive_request_ipi() as __init
Laurent reported that STRICT_MODULE_RWX was causing intermittent crashes
on one of his systems:
kernel tried to execute exec-protected page (c008000004073278) - exploit attempt? (uid: 0)
BUG: Unable to handle kernel instruction fetch
Faulting instruction address: 0xc008000004073278
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: drm virtio_console fuse drm_panel_orientation_quirks ...
CPU: 3 PID: 44 Comm: kworker/3:1 Not tainted 5.14.0-rc4+ #12
Workqueue: events control_work_handler [virtio_console]
NIP: c008000004073278 LR: c008000004073278 CTR: c0000000001e9de0
REGS: c00000002e4ef7e0 TRAP: 0400 Not tainted (5.14.0-rc4+)
MSR: 800000004280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24002822 XER: 200400cf
...
NIP fill_queue+0xf0/0x210 [virtio_console]
LR fill_queue+0xf0/0x210 [virtio_console]
Call Trace:
fill_queue+0xb4/0x210 [virtio_console] (unreliable)
add_port+0x1a8/0x470 [virtio_console]
control_work_handler+0xbc/0x1e8 [virtio_console]
process_one_work+0x290/0x590
worker_thread+0x88/0x620
kthread+0x194/0x1a0
ret_from_kernel_thread+0x5c/0x64
Jordan, Fabiano & Murilo were able to reproduce and identify that the
problem is caused by the call to module_enable_ro() in do_init_module(),
which happens after the module's init function has already been called.
Our current implementation of change_page_attr() is not safe against
concurrent accesses, because it invalidates the PTE before flushing the
TLB and then installing the new PTE. That leaves a window in time where
there is no valid PTE for the page, if another CPU tries to access the
page at that time we see something like the fault above.
We can't simply switch to set_pte_at()/flush TLB, because our hash MMU
code doesn't handle a set_pte_at() of a valid PTE. See [1].
But we do have pte_update(), which replaces the old PTE with the new,
meaning there's no window where the PTE is invalid. And the hash MMU
version hash__pte_update() deals with synchronising the hash page table
correctly.
[1]: https://lore.kernel.org/linuxppc-dev/87y318wp9r.fsf@linux.ibm.com/
Fixes: 1f9ad21c3b ("powerpc/mm: Implement set_memory() routines")
Reported-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Murilo Opsfelder Araújo <muriloo@linux.ibm.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210818120518.3603172-1-mpe@ellerman.id.au
PAPR interface currently supports two different ways of communicating resource
grouping details to the OS. These are referred to as Form 0 and Form 1
associativity grouping. Form 0 is the older format and is now considered
deprecated. This patch adds another resource grouping named FORM2.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210812132223.225214-6-aneesh.kumar@linux.ibm.com
This helper is only used with the dispatch trace log collection.
A later patch will add Form2 affinity support and this change helps
in keeping that simpler. Also add a comment explaining we don't expect
the code to be called with FORM0
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210812132223.225214-5-aneesh.kumar@linux.ibm.com
The associativity details of the newly added resourced are collected from
the hypervisor via "ibm,configure-connector" rtas call. Update the numa
distance details of the newly added numa node after the above call.
Instead of updating NUMA distance every time we lookup a node id
from the associativity property, add helpers that can be used
during boot which does this only once. Also remove the distance
update from node id lookup helpers.
Currently, we duplicate parsing code for ibm,associativity and
ibm,associativity-lookup-arrays in the kernel. The associativity array provided
by these device tree properties are very similar and hence can use
a helper to parse the node id and numa distance details.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210812132223.225214-4-aneesh.kumar@linux.ibm.com
Also make related code cleanup that will allow adding FORM2_AFFINITY in
later patches. No functional change in this patch.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210812132223.225214-3-aneesh.kumar@linux.ibm.com
No functional change in this patch. arch_debugfs_dir is the generic kernel
name declared in linux/debugfs.h for arch-specific debugfs directory.
Architectures like x86/s390 already use the name. Rename powerpc
specific powerpc_debugfs_root to arch_debugfs_dir.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210812132831.233794-2-aneesh.kumar@linux.ibm.com
Similar to x86/s390 add a debugfs file to tune tlb_single_page_flush_ceiling.
Also add a debugfs entry for tlb_local_single_page_flush_ceiling.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210812132831.233794-1-aneesh.kumar@linux.ibm.com
After a LPM, the device tree node ibm,dynamic-reconfiguration-memory may be
updated by the hypervisor in the case the NUMA topology of the LPAR's
memory is updated.
This is handled by the kernel, but the memory's node is not updated because
there is no way to move a memory block between nodes from the Linux kernel
point of view.
If later a memory block is added or removed, drmem_update_dt() is called
and it is overwriting the DT node ibm,dynamic-reconfiguration-memory to
match the added or removed LMB. But the LMB's associativity node has not
been updated after the DT node update and thus the node is overwritten by
the Linux's topology instead of the hypervisor one.
Introduce a hook called when the ibm,dynamic-reconfiguration-memory node is
updated to force an update of the LMB's associativity. However, ignore the
call to that hook when the update has been triggered by drmem_update_dt().
Because, in that case, the LMB tree has been used to set the DT property
and thus it doesn't need to be updated back. Since drmem_update_dt() is
called under the protection of the device_hotplug_lock and the hook is
called in the same context, use a simple boolean variable to detect that
call.
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210517090606.56930-1-ldufour@linux.ibm.com
When a LPAR is migratable, we should consider the maximum possible NUMA
node instead of the number of NUMA nodes from the actual system.
The DT property 'ibm,current-associativity-domains' defines the maximum
number of nodes the LPAR can see when running on that box. But if the
LPAR is being migrated on another box, it may see up to the nodes
defined by 'ibm,max-associativity-domains'. So if a LPAR is migratable,
that value should be used.
Unfortunately, there is no easy way to know if an LPAR is migratable or
not. The hypervisor exports the property 'ibm,migratable-partition' in
the case it set to migrate partition, but that would not mean that the
current partition is migratable.
Without this patch, when a LPAR is started on a 2 node box and then
migrated to a 3 node box, the hypervisor may spread the LPAR's CPUs on
the 3rd node. In that case if a CPU from that 3rd node is added to the
LPAR, it will be wrongly assigned to the node because the kernel has
been set to use up to 2 nodes (the configuration of the departure node).
With this patch applies, the CPU is correctly added to the 3rd node.
Fixes: f9f130ff2e ("powerpc/numa: Detect support for coregroup")
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210511073136.17795-1-ldufour@linux.ibm.com
This reverts commit c742199a01.
c742199a01 ("mm/pgtable: add stubs for {pmd/pub}_{set/clear}_huge")
breaks arm64 in at least two ways for configurations where PUD or PMD
folding occur:
1. We no longer install huge-vmap mappings and silently fall back to
page-granular entries, despite being able to install block entries
at what is effectively the PGD level.
2. If the linear map is backed with block mappings, these will now
silently fail to be created in alloc_init_pud(), causing a panic
early during boot.
The pgtable selftests caught this, although a fix has not been
forthcoming and Christophe is AWOL at the moment, so just revert the
change for now to get a working -rc3 on which we can queue patches for
5.15.
A simple revert breaks the build for 32-bit PowerPC 8xx machines, which
rely on the default function definitions when the corresponding
page-table levels are folded, since commit a6a8f7c4aa ("powerpc/8xx:
add support for huge pages on VMAP and VMALLOC"), eg:
powerpc64-linux-ld: mm/vmalloc.o: in function `vunmap_pud_range':
linux/mm/vmalloc.c:362: undefined reference to `pud_clear_huge'
To avoid that, add stubs for pud_clear_huge() and pmd_clear_huge() in
arch/powerpc/mm/nohash/8xx.c as suggested by Christophe.
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: c742199a01 ("mm/pgtable: add stubs for {pmd/pub}_{set/clear}_huge")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
[mpe: Fold in 8xx.c changes from Christophe and mention in change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/linux-arm-kernel/CAMuHMdXShORDox-xxaeUfDW3wx2PeggFSqhVSHVZNKCGK-y_vQ@mail.gmail.com/
Link: https://lore.kernel.org/r/20210717160118.9855-1-jonathan@marek.ca
Link: https://lore.kernel.org/r/87r1fs1762.fsf@mpe.ellerman.id.au
Signed-off-by: Will Deacon <will@kernel.org>
Fix crashes on 64-bit Book3E due to use of Book3S only mtmsrd instruction.
Fix "scheduling while atomic" warnings at boot due to preempt count underflow.
Two commits fixing our handling of BPF atomic instructions.
Fix error handling in xive when allocating an IPI.
Fix lockup on kernel exec fault on 603.
Thanks to: Bharata B Rao, Cédric Le Goater, Christian Zigotzky, Christophe Leroy, Guenter
Roeck, Jiri Olsa, Naveen N. Rao, Nicholas Piggin, Valentin Schneider.
-----BEGIN PGP SIGNATURE-----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=q3Ag
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fix crashes on 64-bit Book3E due to use of Book3S only mtmsrd
instruction.
Fix "scheduling while atomic" warnings at boot due to preempt count
underflow.
Two commits fixing our handling of BPF atomic instructions.
Fix error handling in xive when allocating an IPI.
Fix lockup on kernel exec fault on 603.
Thanks to Bharata B Rao, Cédric Le Goater, Christian Zigotzky,
Christophe Leroy, Guenter Roeck, Jiri Olsa, Naveen N. Rao, Nicholas
Piggin, and Valentin Schneider"
* tag 'powerpc-5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/preempt: Don't touch the idle task's preempt_count during hotplug
powerpc/64e: Fix system call illegal mtmsrd instruction
powerpc/xive: Fix error handling when allocating an IPI
powerpc/bpf: Reject atomic ops in ppc32 JIT
powerpc/bpf: Fix detecting BPF atomic instructions
powerpc/mm: Fix lockup on kernel exec fault
Christophe Leroy
Nicholas Piggin
Linus Torvalds
Kefeng Wang
Zhenguo Yao
Joel Stanley
David Hildenbrand
Michael Ellerman
Srikar Dronamraju
Aneesh Kumar K.V
Laurent Dufour
Hari Bathini
Jonathan Marek