This driver adds support for the single mailbox channel of the MSS
system controller on the Microchip PolarFire SoC.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Clang warns:
drivers/mailbox/imx-mailbox.c:284:2: warning: variable 'val' is used
uninitialized whenever switch default is taken
[-Wsometimes-uninitialized]
default:
^~~~~~~
drivers/mailbox/imx-mailbox.c:288:7: note: uninitialized use occurs here
if (!val)
^~~
drivers/mailbox/imx-mailbox.c:263:9: note: initialize the variable 'val'
to silence this warning
u32 val, ctrl;
^
= 0
1 warning generated.
Prior to commit 91c8c1fbe498 ("mailbox: imx: add xSR/xCR register
array"), val was always initialized in imx_mu_isr() but now, it is not
initialized in the default case. Return IRQ_NONE like the statement
below does and add a message that there is an unhandled type for this
switch statement so that it can be updated.
Fixes: 91c8c1fbe498 ("mailbox: imx: add xSR/xCR register array")
Link: https://github.com/ClangBuiltLinux/linux/issues/1404
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Enable MSM8939 APCS support by adding the compatible. It reuses
msm8916_apcs_data.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
In adding APCS clock support for MSM8939, the second clock registration
fails due to duplicate device name like below.
[ 0.519657] sysfs: cannot create duplicate filename '/bus/platform/devices/qcom-apcs-msm8916-clk'
...
[ 0.661158] qcom_apcs_ipc b111000.mailbox: failed to register APCS clk
This is because MSM8939 has 3 APCS instances for Cluster0 (little cores),
Cluster1 (big cores) and CCI (Cache Coherent Interconnect). Although
only APCS of Cluster0 and Cluster1 have IPC bits, each of 3 APCS has
A53PLL clock control bits. That said, 3 'qcom-apcs-msm8916-clk' devices
need to be registered to instantiate all 3 clocks. Use PLATFORM_DEVID_AUTO
rather than PLATFORM_DEVID_NONE for platform_device_register_data() call
to fix the issue above.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
This commit adds compatible for the SM6125 SoC
Signed-off-by: Martin Botka <martin.botka@somainline.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The "cb" pointer needs to be initialized before can assign
"data.data = cb->data;".
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Fix IPCC (Inter-Processor Communication Controller) channel exhaustion by
setting the channel private data to NULL on mbox shutdown.
Err Logs:
remoteproc: MBA booted without debug policy, loading mpss
remoteproc: glink-edge: failed to acquire IPC channel
remoteproc: failed to probe subdevices for remoteproc: -16
Fixes: fa74a0257f ("mailbox: Add support for Qualcomm IPCC")
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Cc: stable@vger.kernel.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Current client use 'struct cmdq_pkt' as callback data, so
change 'void *data' to 'struct cmdq_pkt *pkt'. Keep data
until client use pkt instead of data.
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
rx_callback is a standard mailbox callback mechanism and could cover the
function of proprietary cmdq_task_cb, so use the standard one instead of
the proprietary one. But the client driver has already used cmdq_task_cb,
so keep cmdq_task_cb until all client driver use rx_callback instead of
cmdq_task_cb.
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
cmdq_cb_status is an error status. Use the standard error number
instead of cmdq_cb_status to prevent status duplication.
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
i.MX8ULP MU has different register layout and bit layout compared
with i.MX6SX/7ULP/8.
So add enum imx_mu_type to show it is IMX_MU_V2 or IMX_MU_V1.
For IMX_MU_V2 mu hardware, check it when calculating bit offset to get
the correct offset.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
We are going to add a new platform which has 4 status registers(SR, TSR,
RSR, GSR) and 4 control registers(CR, TCR, RCR, GCR), so extend xSR
and xCR to register array and adapt code to use it.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The xTR/xRR registers are using 4 bytes stride and continuous.
Considering we will support more TR and RR registers, use base + idx * 4
method to calculate register address, not hardcoding in driver.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
s/Hisilicon/HiSilicon/.
It should use capital S, according to
https://www.hisilicon.com/en.
Signed-off-by: Hao Fang <fanghao11@huawei.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
When devm_ioremap_resource() fails, a clear enough error message will be
printed by its subfunction __devm_ioremap_resource(). The error
information contains the device name, failure cause, and possibly resource
information.
Therefore, remove the error printing here to simplify code and reduce the
binary size.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
When devm_ioremap_resource() fails, a clear enough error message will be
printed by its subfunction __devm_ioremap_resource(). The error
information contains the device name, failure cause, and possibly resource
information.
Therefore, remove the error printing here to simplify code and reduce the
binary size.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
When devm_ioremap_resource() fails, a clear enough error message will be
printed by its subfunction __devm_ioremap_resource(). The error
information contains the device name, failure cause, and possibly resource
information.
Therefore, remove the error printing here to simplify code and reduce the
binary size.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Some sensors connected to Unisoc mailbox will send data very frequently.
This makes channel 0 very busy and the messages from other remote cores
not able to be handled as soon as possible.
It's a trick (un-documented) from Unisoc ASIC designers to resolve this
special requirement that an inbox assigned to one of the remote cores
before was modified to be exposed to host cpu core.
Then from host side, a supplementary inbox is added for transferring mass
but not emergency messages from the remote cores, such as step counting
sensor, with an independent FIFO and interrupt which is as same as channel
0. Meanwihle, inbox part of this channel is still kept for original remote
core to use.
Signed-off-by: Orson Zhai <orson.zhai@unisoc.com>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Unisoc mailbox has no way to be enabled/disabled for any single channel.
They can only be set to startup or shutdown as a whole device at same time.
Add a variable to count references to avoid mailbox FIFO being reset
unexpectedly when clients are requesting or freeing channels.
Also add a lock to dismiss possible conflicts from register r/w in
different startup or shutdown threads. And fix the crash problem when early
interrupts come from channel which has not been requested by client yet.
Fixes: ca27fc26cd ("mailbox: sprd: Add Spreadtrum mailbox driver")
Signed-off-by: Orson Zhai <orson.zhai@unisoc.com>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
./drivers/mailbox/pcc.c:580:3-8: No need to set .owner here. The core
will do it.
Remove .owner field if calls are used which set it automatically
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Change my e-mail address to kabel@kernel.org, and fix my name in
non-code parts (add diacritical mark).
Link: https://lkml.kernel.org/r/20210325171123.28093-2-kabel@kernel.org
Signed-off-by: Marek Behún <kabel@kernel.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is possible that 'data' passed to kfree() is set to a error value
instead of allocated space. Make sure it doesn't get called with invalid
pointer.
Fixes: 5a6338cce9 ("mailbox: arm_mhuv2: Add driver")
Cc: v5.11 <stable@vger.kernel.org> # v5.11
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
On Tegra194, due to both BPMP and TCU using mailboxes, we get a
lockdep spew at boot. Both are using different instances of HSP,
so this is harmless. As such give each HSP instance a different
lockdep class.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
According to the specification, bit[2] represents SPRD_OUTBOX_FIFO_FULL,
not bit[0], so correct it.
Fixes: ca27fc26cd ("mailbox: sprd: Add Spreadtrum mailbox driver")
Signed-off-by: Magnum Shan <magnum.shan@unisoc.com>
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
My build tests failed to catch that amba driver that would have needed
adaption in commit 3fd269e74f ("amba: Make the remove callback return
void"). Change the remove function to make the driver build again.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 3fd269e74f ("amba: Make the remove callback return void")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
In SDX55, the IPC bits are located in the APCS GCC block. Also, this block
can provide clock functionality. Hence, add support for IPC with correct
offset and name of the clock provider.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The AM64x SoC contains a Mailbox IP instance with multiple clusters
in the MAIN domain, and is a variant of the IP on current AM65x and
J721E SoCs. The AM64x SoC has only 8 clusters with no interrupts
routed to the A53 core on the first 2 clusters. The interrupt outputs
from the IP do not go through any Interrupt Routers and are hard-wired
to each processor, with only couple of interrupts from each cluster
reaching the A53 core. The IP is also not built with the K3 safety
feature in hardware.
Add the support for this IP through a new compatible.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The Qualcomm SC8180X platform has a APSS block exposing the usual IPC
bits, add a compatible for this.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
This adds driver for the ARM MHUv2 (Message Handling Unit) mailbox
controller.
This is based on the accepted DT bindings of the controller and supports
combination of both transport protocols, i.e. doorbell and data-transfer.
Transmitting and receiving data through the mailbox framework is done
through struct arm_mhuv2_mbox_msg.
Based on the initial work done by Morten Borup Petersen from ARM.
Co-developed-by: Tushar Khandelwal <tushar.khandelwal@arm.com>
Signed-off-by: Tushar Khandelwal <tushar.khandelwal@arm.com>
Tested-by: Usama Arif <usama.arif@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Now that the driver can be enabled by COMPILE_TEST, we see warnings on
64bit platforms when void pointers are cast to unsigned int (and
vice versa).
warning: cast to smaller integer type 'unsigned int' from 'void *'
unsigned int chan = (unsigned int)link->con_priv;
...
warning: cast to 'void *' from smaller integer type 'unsigned int'
ipcc->controller.chans[i].con_priv = (void *)i;
Update these casts to use unsigned long variables, which are the same
size as pointers on all platforms.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
platform_get_irq_byname already prints an error message if the requested
irq was not found. Don't print another message in the driver.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
This allows compiling the driver on architectures where the hardware is not
available. Most other mailbox drivers support this as well.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The mhu_db_channel info is allocated per channel using devm_kzalloc from
mhu_db_mbox_xlate which gets called from mbox_request_channel. However
we are releasing the allocated mhu_db_channel info using plain kfree from
mhu_db_shutdown which is called from mbox_free_channel.
This leads to random crashes when the channel is freed like below one:
Unable to handle kernel paging request at virtual address 0080000400000008
[0080000400000008] address between user and kernel address ranges
Internal error: Oops: 96000044 [#1] PREEMPT SMP
Modules linked in: scmi_module(-)
CPU: 1 PID: 2212 Comm: rmmod Not tainted 5.10.0-rc5 #31
Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno
Development Platform, BIOS EDK II Nov 19 2020
pstate: 20000085 (nzCv daIf -PAN -UAO -TCO BTYPE=--)
pc : release_nodes+0x74/0x230
lr : devres_release_all+0x40/0x68
Call trace:
release_nodes+0x74/0x230
devres_release_all+0x40/0x68
device_release_driver_internal+0x12c/0x1f8
driver_detach+0x58/0xe8
bus_remove_driver+0x64/0xe0
driver_unregister+0x38/0x68
platform_driver_unregister+0x1c/0x28
scmi_driver_exit+0x38/0x44 [scmi_module]
__arm64_sys_delete_module+0x188/0x260
el0_svc_common.constprop.0+0x80/0x1a8
do_el0_svc+0x2c/0x98
el0_sync_handler+0x160/0x168
el0_sync+0x174/0x180
Code: 1400000d eb07009f 54000460 f9400486 (f90004a6)
---[ end trace c55ffd306c140233 ]---
Fix it by replacing kfree with devm_kfree as required.
Fixes: 7002ca237b ("mailbox: arm_mhu: Add ARM MHU doorbell driver")
Reported-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Various driver updates for platforms. A bulk of this is smaller fixes or
cleanups, but some of the new material this time around is:
- Support for Nvidia Tegra234 SoC
- Ring accelerator support for TI AM65x
- PRUSS driver for TI platforms
- Renesas support for R-Car V3U SoC
- Reset support for Cortex-M4 processor on i.MX8MQ
There are also new socinfo entries for a handful of different SoCs
and platforms.
-----BEGIN PGP SIGNATURE-----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=tfPb
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC-related driver updates from Olof Johansson:
"Various driver updates for platforms. A bulk of this is smaller fixes
or cleanups, but some of the new material this time around is:
- Support for Nvidia Tegra234 SoC
- Ring accelerator support for TI AM65x
- PRUSS driver for TI platforms
- Renesas support for R-Car V3U SoC
- Reset support for Cortex-M4 processor on i.MX8MQ
There are also new socinfo entries for a handful of different SoCs and
platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits)
drm/mediatek: reduce clear event
soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api
soc: mediatek: cmdq: add jump function
soc: mediatek: cmdq: add write_s_mask value function
soc: mediatek: cmdq: add write_s value function
soc: mediatek: cmdq: add read_s function
soc: mediatek: cmdq: add write_s_mask function
soc: mediatek: cmdq: add write_s function
soc: mediatek: cmdq: add address shift in jump
soc: mediatek: mtk-infracfg: Fix kerneldoc
soc: amlogic: pm-domains: use always-on flag
reset: sti: reset-syscfg: fix struct description warnings
reset: imx7: add the cm4 reset for i.MX8MQ
dt-bindings: reset: imx8mq: add m4 reset
reset: Fix and extend kerneldoc
reset: reset-zynqmp: Added support for Versal platform
dt-bindings: reset: Updated binding for Versal reset driver
reset: imx7: Support module build
soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk
soc: fsl: qman: convert to use be32_add_cpu()
...
If the txdone is done by polling, it is possible for msg_submit() to start
the timer while txdone_hrtimer() callback is running. If the timer needs
recheduling, it could already be enqueued by the time hrtimer_forward_now()
is called, leading hrtimer to loudly complain.
WARNING: CPU: 3 PID: 74 at kernel/time/hrtimer.c:932 hrtimer_forward+0xc4/0x110
CPU: 3 PID: 74 Comm: kworker/u8:1 Not tainted 5.9.0-rc2-00236-gd3520067d01c-dirty #5
Hardware name: Libre Computer AML-S805X-AC (DT)
Workqueue: events_freezable_power_ thermal_zone_device_check
pstate: 20000085 (nzCv daIf -PAN -UAO BTYPE=--)
pc : hrtimer_forward+0xc4/0x110
lr : txdone_hrtimer+0xf8/0x118
[...]
This can be fixed by not starting the timer from the callback path. Which
requires the timer reloading as long as any message is queued on the
channel, and not just when current tx is not done yet.
Fixes: 0cc67945ea ("mailbox: switch to hrtimer for tx_complete polling")
Reported-by: Da Xue <da@libre.computer>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
platform_get_irq() returns -ERRNO on error. In such case casting to u32
and comparing to 0 would pass the check.
Fixes: 623a6143a8 ("mailbox: mediatek: Add Mediatek CMDQ driver")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The MHU drives the signal using a 32-bit register, with all 32 bits
logically ORed together. The MHU provides a set of registers to enable
software to set, clear, and check the status of each of the bits of this
register independently. The use of 32 bits for each interrupt line
enables software to provide more information about the source of the
interrupt. For example, each bit of the register can be associated with
a type of event that can contribute to raising the interrupt.
This patch adds a separate the MHU controller driver for doorbel mode
of operation using the extended DT binding to add support the same.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Since we will be soon adding a separate driver based on this ARM MHU
driver to support doorbell mode, let us add explicit check to match
the default compatible for this driver. This is needed as the probe
and match reuses the AMBA device ids currently and don't have any
explicit compatible check.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Enable support for the BPMP on Tegra234 to avoid relying on Tegra194
being enabled to pull in the needed OF device ID table entry.
On simulation platforms the BPMP hasn't booted up yet by the time we
probe the BPMP driver and the BPMP hasn't had a chance to mark the
doorbell as ringable by the CCPLEX. This corresponding check in the
BPMP driver will therefore fail. Work around this by disabling the
check on simulation platforms.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Patch series "iomap: Constify ioreadX() iomem argument", v3.
The ioread8/16/32() and others have inconsistent interface among the
architectures: some taking address as const, some not.
It seems there is nothing really stopping all of them to take pointer to
const.
This patch (of 4):
The ioreadX() and ioreadX_rep() helpers have inconsistent interface. On
some architectures void *__iomem address argument is a pointer to const,
on some not.
Implementations of ioreadX() do not modify the memory under the address so
they can be converted to a "const" version for const-safety and
consistency among architectures.
[krzk@kernel.org: sh: clk: fix assignment from incompatible pointer type for ioreadX()]
Link: http://lkml.kernel.org/r/20200723082017.24053-1-krzk@kernel.org
[akpm@linux-foundation.org: fix drivers/mailbox/bcm-pdc-mailbox.c]
Link: http://lkml.kernel.org/r/202007132209.Rxmv4QyS%25lkp@intel.com
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Allen Hubbe <allenbh@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Link: http://lkml.kernel.org/r/20200709072837.5869-1-krzk@kernel.org
Link: http://lkml.kernel.org/r/20200709072837.5869-2-krzk@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Do success callback in channel when shutdown. For those task not finish,
callback with error code thus client has chance to cleanup or reset.
Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Add gce v4 hardware support with different thread number and shift.
Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Some gce hardware shift pc and end address in register to support
large dram addressing.
Implement gce address shift when write or read pc and end register.
And add shift bit in platform definition.
Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@mediatek.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Conor Dooley
Nathan Chancellor
Shawn Guo
Martin Botka
Dan Carpenter
Zhihao Cheng
Sibi Sankar
Chun-Kuang Hu
Peng Fan
Hao Fang
Zhen Lei
Linus Torvalds
Qiheng Lin
Orson Zhai
Tom Saeger
Yang Li
Marek Behún
Viresh Kumar
Mikko Perttunen
Magnum Shan
Uwe Kleine-König
Manivannan Sadhasivam
Suman Anna
Bjorn Andersson
Martin Kaiser
Sudeep Holla
Jassi Brar
Krzysztof Kozlowski
Allen Pais
Thierry Reding
Dennis YC Hsieh