The following BUG can occur when an inode which is getting freed when
it still has dirty pages outstanding, and it gets deleted (in this
because it was the target of a rename). In ordered mode, we need to
make sure the data pages are written just in case we crash before the
rename (or unlink) is committed. If the inode is being freed then
when we try to igrab the inode, we end up tripping the BUG_ON at
fs/ext4/page-io.c:146.
To solve this problem, we need to keep track of the number of io
callbacks which are pending, and avoid destroying the inode until they
have all been completed. That way we don't have to bump the inode
count to keep the inode from being destroyed; an approach which
doesn't work because the count could have already been dropped down to
zero before the inode writeback has started (at which point we're not
allowed to bump the count back up to 1, since it's already started
getting freed).
Thanks to Dave Chinner for suggesting this approach, which is also
used by XFS.
kernel BUG at /scratch_space/linux-2.6/fs/ext4/page-io.c:146!
Call Trace:
[<ffffffff811075b1>] ext4_bio_write_page+0x172/0x307
[<ffffffff811033a7>] mpage_da_submit_io+0x2f9/0x37b
[<ffffffff811068d7>] mpage_da_map_and_submit+0x2cc/0x2e2
[<ffffffff811069b3>] mpage_add_bh_to_extent+0xc6/0xd5
[<ffffffff81106c66>] write_cache_pages_da+0x2a4/0x3ac
[<ffffffff81107044>] ext4_da_writepages+0x2d6/0x44d
[<ffffffff81087910>] do_writepages+0x1c/0x25
[<ffffffff810810a4>] __filemap_fdatawrite_range+0x4b/0x4d
[<ffffffff810815f5>] filemap_fdatawrite_range+0xe/0x10
[<ffffffff81122a2e>] jbd2_journal_begin_ordered_truncate+0x7b/0xa2
[<ffffffff8110615d>] ext4_evict_inode+0x57/0x24c
[<ffffffff810c14a3>] evict+0x22/0x92
[<ffffffff810c1a3d>] iput+0x212/0x249
[<ffffffff810bdf16>] dentry_iput+0xa1/0xb9
[<ffffffff810bdf6b>] d_kill+0x3d/0x5d
[<ffffffff810be613>] dput+0x13a/0x147
[<ffffffff810b990d>] sys_renameat+0x1b5/0x258
[<ffffffff81145f71>] ? _atomic_dec_and_lock+0x2d/0x4c
[<ffffffff810b2950>] ? cp_new_stat+0xde/0xea
[<ffffffff810b29c1>] ? sys_newlstat+0x2d/0x38
[<ffffffff810b99c6>] sys_rename+0x16/0x18
[<ffffffff81002a2b>] system_call_fastpath+0x16/0x1b
Reported-by: Nick Bowler <nbowler@elliptictech.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Tested-by: Nick Bowler <nbowler@elliptictech.com>
The client can have a newer ctime than the MDS due to AUTH_EXCL and
XATTR_EXCL caps as well; update the check in ceph_fill_file_time
appropriately.
This fixes cases where ctime/mtime goes backward under the right sequence
of local updates (e.g. chmod) and mds replies (e.g. subsequent stat that
goes to the MDS).
Signed-off-by: Sage Weil <sage@newdream.net>
We may get updates on the same inode from multiple MDSs; generally we only
pay attention if the update is newer than what we already have. The
exception is when an MDS sense unstable information, in which case we
always update.
The old > check got this wrong when our version was odd (e.g. 3) and the
reply version was even (e.g. 2): the older stale (v2) info would be
applied. Fixed and clarified the comment.
Signed-off-by: Sage Weil <sage@newdream.net>
MDS requests can be rebuilt and resent in non-process context, but were
filling in uid/gid from current_fsuid/gid. Put that information in the
request struct on request setup.
This fixes incorrect (and root) uid/gid getting set for requests that
are forwarded between MDSs, usually due to metadata migrations.
Signed-off-by: Sage Weil <sage@newdream.net>
We used to use rdcache_gen to indicate whether we "might" have cached
pages. Now we just look at the mapping to determine that. However, some
old behavior remains from that transition.
First, rdcache_gen == 0 no longer means we have no pages. That can happen
at any time (presumably when we carry FILE_CACHE). We should not reset it
to zero, and we should not check that it is zero.
That means that the only purpose for rdcache_revoking is to resolve races
between new issues of FILE_CACHE and an async invalidate. If they are
equal, we should invalidate. On success, we decrement rdcache_revoking,
so that it is no longer equal to rdcache_gen. Similarly, if we success
in doing a sync invalidate, set revoking = gen - 1. (This is a small
optimization to avoid doing unnecessary invalidate work and does not
affect correctness.)
Signed-off-by: Sage Weil <sage@newdream.net>
If the auth cap migrates to another MDS, clear requested_max_size so that
we resend any pending max_size increase requests. This fixes potential
hangs on writes that extend a file and race with an cap migration between
MDSs.
Signed-off-by: Sage Weil <sage@newdream.net>
Only the auth MDS has a meaningful max_size value for us, so only update it
in fill_inode if we're being issued an auth cap. Otherwise, a random
stat result from a non-auth MDS can clobber a meaningful max_size, get
the client<->mds cap state out of sync, and make writes hang.
Specifically, even if the client re-requests a larger max_size (which it
will), the MDS won't respond because as far as it knows we already have a
sufficiently large value.
Signed-off-by: Sage Weil <sage@newdream.net>
Normally when we open a file we already have a cap, and simply update the
wanted set. However, if we open a file for write, but don't have an auth
cap, that doesn't work; we need to open a new cap with the auth MDS. Only
reuse existing caps if we are opening for read or the existing cap is auth.
Signed-off-by: Sage Weil <sage@newdream.net>
We dereference *in a few lines down, but only set it on rename. It is
apparently pretty rare for this to trigger, but I have been hitting it
with a clustered MDSs.
Signed-off-by: Sage Weil <sage@newdream.net>
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
cifs: make cifs_set_oplock_level() take a cifsInodeInfo pointer
cifs: dereferencing first then checking
cifs: trivial comment fix: tlink_tree is now a rbtree
[CIFS] Cleanup unused variable build warning
cifs: convert tlink_tree to a rbtree
cifs: store pointer to master tlink in superblock (try #2)
cifs: trivial doc fix: note setlease implemented
CIFS: Add cifs_set_oplock_level
FS: cifs, remove unneeded NULL tests
All the callers already have a pointer to struct cifsInodeInfo. Use it.
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
This patch is based on Dan's original patch. His original description is
below:
Smatch complained about a couple checking for NULL after dereferencing
bugs. I'm not super familiar with the code so I did the conservative
thing and move the dereferences after the checks.
The dereferences in cifs_lock() and cifs_fsync() were added in
ba00ba64cf "cifs: make various routines use the cifsFileInfo->tcon
pointer". The dereference in find_writable_file() was added in
6508d904e6 "cifs: have find_readable/writable_file filter by fsuid".
The comments there say it's possible to trigger the NULL dereference
under stress.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Noticed while reviewing (late) the rbtree conversion patchset (which has been merged
already).
Cc: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
We now initialize the percpu counters before replaying the journal,
but after the journal, we recalculate the global counters, to deal
with the possibility of the per-blockgroup counts getting updated by
the journal replay.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If a connection is closed just after a sequence or create_session
is sent over it, we could end up trying to register a callback that will
never get called since the xprt is already marked dead.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Radix trees are ideal when you want to track a bunch of pointers and
can't embed a tracking structure within the target of those pointers.
The tradeoff is an increase in memory, particularly if the tree is
sparse.
In CIFS, we use the tlink_tree to track tcon_link structs. A tcon_link
can never be in more than one tlink_tree, so there's no impediment to
using a rb_tree here instead of a radix tree.
Convert the new multiuser mount code to use a rb_tree instead. This
should reduce the memory required to manage the tlink_tree.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
This is the second version of this patch, the only difference between
it and the first one is that this explicitly makes cifs_sb_master_tlink
a static inline.
Instead of keeping a tag on the master tlink in the tree, just keep a
pointer to the master in the superblock. That eliminates the need for
using the radix tree to look up a tagged entry.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Simplify many places when we need to set oplock level on an inode.
Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Newer GCC's reported the following build warning:
fs/ext4/super.c: In function 'ext4_lazyinit_thread':
fs/ext4/super.c:2702: warning: 'ret' may be used uninitialized in this function
Fix it by removing the need for the ret variable in the first place.
Signed-off-by: "Lukas Czerner" <lczerner@redhat.com>
Reported-by: "Stefan Richter" <stefanr@s5r6.in-berlin.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When the request has been removed from the list and no other request
has been issued, we will end up with next wakeup scheduled to
MAX_JIFFY_OFFSET which is bad. So check for that.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Linus noted, and complained to me, that doing while lots of "git diff"'s
of kernel sources, these spinlocks were responsible for 27% of the
spinlock cost on his two-processor system as reported by perf.
Git was doing lots of parallel stats, and this was putting a lot of
pressure on ext4_getattr(). A spinlock to protect a single
memory-to-memory copy is pointless, so remove it.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stanse found that pSMBFile in cifs_ioctl and file->f_path.dentry in
cifs_user_write are dereferenced prior their test to NULL.
The alternative is not to dereference them before the tests. The patch is
to point out the problem, you have to decide.
While at it we cache the inode in cifs_user_write to a local variable
and use all over the function.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Steve French <sfrench@samba.org>
Cc: linux-cifs@vger.kernel.org
Cc: Jeff Layton <jlayton@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Commit 7d945a3aa7 ("logfs get_sb, part 3") broke the logfs build when
CONFIG_MTD is set due to a mangled logfs_get_sb_mtd() definition.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
genirq: Fix up irq_node() for irq_data changes.
genirq: Add single IRQ reservation helper
genirq: Warn if enable_irq is called before irq is set up
* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
semaphore: Remove mutex emulation
staging: Final semaphore cleanup
jbd2: Convert jbd2_slab_create_sem to mutex
hpfs: Convert sbi->hpfs_creation_de to mutex
Fix up trivial change/delete conflicts with deleted 'dream' drivers
(drivers/staging/dream/camera/{mt9d112.c,mt9p012_fox.c,mt9t013.c,s5k3e2fx.c})
This one was only used for a nasty hack in nfsd, which has recently
been removed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The caller allocated it, the caller should free it.
The only issue so far is that we could change the flp pointer even on an
error return if the fl_change callback failed. But we can simply move
the flp assignment after the fl_change invocation, as the callers don't
care about the flp return value if the setlease call failed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The NFSv4 server was initializing the dp->dl_flock pointer by the
somewhat ridiculous method of a locks_copy_lock callback.
Now that setlease uses the passed-in lock instead of doing a copy,
dl_flock no longer gets set, resulting in the lock leaking on delegation
release, and later possible hangs (among other problems).
So, initialize dl_flock and get rid of the callback.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We modified setlease to require the caller to allocate the new lease in
the case of creating a new lease, but forgot to fix up the filesystem
methods.
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Steve French <sfrench@samba.org>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We're depending on setlease to free the passed-in lease on failure.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Removing a lock shouldn't require any allocations; a failure due to
ENOMEM leaves the caller with a choice between retrying or giving up and
leaking an unused lease.
Next we should split the other lease calls into add and delete cases.
I wanted to start with just the bugfix.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://git.infradead.org/users/eparis/notify: (22 commits)
Ensure FMODE_NONOTIFY is not set by userspace
make fanotify_read() restartable across signals
fsnotify: remove alignment padding from fsnotify_mark on 64 bit builds
fs/notify/fanotify/fanotify_user.c: fix warnings
fanotify: Fix FAN_CLOSE comments
fanotify: do not recalculate the mask if the ignored mask changed
fanotify: ignore events on directories unless specifically requested
fsnotify: rename FS_IN_ISDIR to FS_ISDIR
fanotify: do not send events for irregular files
fanotify: limit number of listeners per user
fanotify: allow userspace to override max marks
fanotify: limit the number of marks in a single fanotify group
fanotify: allow userspace to override max queue depth
fsnotify: implement a default maximum queue depth
fanotify: ignore fanotify ignore marks if open writers
fanotify: allow userspace to flush all marks
fsnotify: call fsnotify_parent in perm events
fsnotify: correctly handle return codes from listeners
fanotify: use __aligned_u64 in fanotify userspace metadata
fanotify: implement fanotify listener ordering
...
In fanotify_read() return -ERESTARTSYS instead of -EINTR to
make read() restartable across signals (BSD semantic).
Signed-off-by: Eric Paris <eparis@redhat.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (39 commits)
Btrfs: deal with errors from updating the tree log
Btrfs: allow subvol deletion by unprivileged user with -o user_subvol_rm_allowed
Btrfs: make SNAP_DESTROY async
Btrfs: add SNAP_CREATE_ASYNC ioctl
Btrfs: add START_SYNC, WAIT_SYNC ioctls
Btrfs: async transaction commit
Btrfs: fix deadlock in btrfs_commit_transaction
Btrfs: fix lockdep warning on clone ioctl
Btrfs: fix clone ioctl where range is adjacent to extent
Btrfs: fix delalloc checks in clone ioctl
Btrfs: drop unused variable in block_alloc_rsv
Btrfs: cleanup warnings from gcc 4.6 (nonbugs)
Btrfs: Fix variables set but not read (bugs found by gcc 4.6)
Btrfs: Use ERR_CAST helpers
Btrfs: use memdup_user helpers
Btrfs: fix raid code for removing missing drives
Btrfs: Switch the extent buffer rbtree into a radix tree
Btrfs: restructure try_release_extent_buffer()
Btrfs: use the flusher threads for delalloc throttling
Btrfs: tune the chunk allocation to 5% of the FS as metadata
...
Fix up trivial conflicts in fs/btrfs/super.c and fs/fs-writeback.c, and
remove use of INIT_RCU_HEAD in fs/btrfs/extent_io.c (that init macro was
useless and removed in commit 5e8067adfdba: "rcu head remove init")
The btrfs merge looks like hell, because it changes fs-writeback.c, and
the crazy code has this repeated "estimate number of dirty pages"
counting that involves three different helper functions. And it's done
in two different places.
Just unify that whole calculation as a "get_nr_dirty_pages()" helper
function, and the merge result will look half-way decent.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.infradead.org/mtd-2.6: (82 commits)
mtd: fix build error in m25p80.c
mtd: Remove redundant mutex from mtd_blkdevs.c
MTD: Fix wrong check register_blkdev return value
Revert "mtd: cleanup Kconfig dependencies"
mtd: cfi_cmdset_0002: make sector erase command variable
mtd: cfi_cmdset_0002: add CFI detection for SST 38VF640x chips
mtd: cfi_util: add support for switching SST 39VF640xB chips into QRY mode
mtd: cfi_cmdset_0001: use defined value of P_ID_INTEL_PERFORMANCE instead of hardcoded one
block2mtd: dubious assignment
P4080/mtd: Fix the freescale lbc issue with 36bit mode
P4080/eLBC: Make Freescale elbc interrupt common to elbc devices
mtd: phram: use KBUILD_MODNAME
mtd: OneNAND: S5PC110: Fix double call suspend & resume function
mtd: nand: fix MTD_MODE_RAW writes
jffs2: use kmemdup
mtd: sm_ftl: cosmetic, use bool when possible
mtd: r852: remove useless pci powerup/down from suspend/resume routines
mtd: blktrans: fix a race vs kthread_stop
mtd: blktrans: kill BKL
mtd: allow to unload the mtdtrans module if its block devices aren't open
...
Fix up trivial whitespace-introduced conflict in drivers/mtd/mtdchar.c
The definition of PAGE_CACHE_MASK in <linux/pagemap.h> is needed to use
MAX_RW_COUNT, and on x86-64 that gets done indirectly through the
architecture header includes. But on MIPS and s390 that doesn't happen,
and we need to make sure that fs/compat.c includes pagemap.h explicitly.
Introduced in commit 435f49a518 ("readv/writev: do the same
MAX_RW_COUNT truncation that read/write does").
Reported-by: Sachin Sant <sachinp@in.ibm.com> (S390)
Reported-by: wu zhangjin <wuzhangjin@gmail.com> (MIPS)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Conflicts:
drivers/mtd/mtd_blkdevs.c
Merge Grant's device-tree bits so that we can apply the subsequent fixes.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
During unlink we remove any references to the inode from
the tree log. It can return -ENOENT and other errors,
and this changes the unlink code to deal with it.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
jbd2_slab_create_sem is used as a mutex, so make it one.
[ akpm muttered: We may as well make it local to
jbd2_journal_create_slab() also. ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <alpine.LFD.2.00.1010162231480.2496@localhost6.localdomain6>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
sbi->hpfs_creation_de is used as mutex so make it a mutex.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Christoph Hellwig <hch@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
LKML-Reference: <20100907125056.228874895@linutronix.de>
Add a mount option user_subvol_rm_allowed that allows users to delete a
(potentially non-empty!) subvol when they would otherwise we allowed to do
an rmdir(2). We duplicate the may_delete() checks from the core VFS code
to implement identical security checks (minus the directory size check).
We additionally require that the user has write+exec permission on the
subvol root inode.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
There is no reason to force an immediate commit when deleting a snapshot.
Users have some expectation that space from a deleted snapshot be freed
immediately, but even if we do commit the reclaim is a background process.
If users _do_ want the deletion to be durable, they can call 'sync'.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Create a snap without waiting for it to commit to disk. The ioctl is
ordered such that subsequent operations will not be contained by the
created snapshot, and the commit is initiated, but the ioctl does not
wait for the snapshot to commit to disk.
We return the specific transid to userspace so that an application can wait
for this specific snapshot creation to commit via the WAIT_SYNC ioctl.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6:
eCryptfs: Print mount_auth_tok_only param in ecryptfs_show_options
ecryptfs: added ecryptfs_mount_auth_tok_only mount parameter
ecryptfs: checking return code of ecryptfs_find_auth_tok_for_sig()
ecryptfs: release keys loaded in ecryptfs_keyring_auth_tok_for_sig()
eCryptfs: Clear LOOKUP_OPEN flag when creating lower file
ecryptfs: call vfs_setxattr() in ecryptfs_setxattr()
START_SYNC will start a sync/commit, but not wait for it to
complete. Any modification started after the ioctl returns is
guaranteed not to be included in the commit. If a non-NULL
pointer is passed, the transaction id will be returned to
userspace.
WAIT_SYNC will wait for any in-progress commit to complete. If a
transaction id is specified, the ioctl will block and then
return (success) when the specified transaction has committed.
If it has already committed when we call the ioctl, it returns
immediately. If the specified transaction doesn't exist, it
returns EINVAL.
If no transaction id is specified, WAIT_SYNC will wait for the
currently committing transaction to finish it's commit to disk.
If there is no currently committing transaction, it returns
success.
These ioctls are useful for applications which want to impose an
ordering on when fs modifications reach disk, but do not want to
wait for the full (slow) commit process to do so.
Picky callers can take the transid returned by START_SYNC and
feed it to WAIT_SYNC, and be certain to wait only as long as
necessary for the transaction _they_ started to reach disk.
Sloppy callers can START_SYNC and WAIT_SYNC without a transid,
and provided they didn't wait too long between the calls, they
will get the same result. However, if a second commit starts
before they call WAIT_SYNC, they may end up waiting longer for
it to commit as well. Even so, a START_SYNC+WAIT_SYNC still
guarantees that any operation completed before the START_SYNC
reaches disk.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Add support for an async transaction commit that is ordered such that any
subsequent operations will join the following transaction, but does not
wait until the current commit is fully on disk. This avoids much of the
latency associated with the btrfs_commit_transaction for callers concerned
with serialization and not safety.
The wait_for_unblock flag controls whether we wait for the 'middle' portion
of commit_transaction to complete, which is necessary if the caller expects
some of the modifications contained in the commit to be available (this is
the case for subvol/snapshot creation).
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
We calculate timeout (either 1 or MAX_SCHEDULE_TIMEOUT) based on whether
num_writers > 1 or should_grow at the top of the loop. Then, much much
later, we wait for that timeout if either num_writers or should_grow is
true. However, it's possible for a racing process (calling
btrfs_end_transaction()) to decrement num_writers such that we wait
forever instead of for 1.
Fix this by deciding how long to wait when we wait. Include a smp_mb()
before checking if the waitqueue is active to ensure the num_writers
is visible.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
I'm no lockdep expert, but this appears to make the lockdep warning go
away for the i_mutex locking in the clone ioctl.
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
We had an edge case issue where the requested range was just
following an existing extent. Instead of skipping to the next
extent, we used the previous one which lead to having zero
sized extents.
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The lookup_first_ordered_extent() was done on the wrong inode, and the
->delalloc_bytes test was wrong, as the following
btrfs_wait_ordered_range() would only invoke a range write and wouldn't
write the entire file data range. Also, a bad parameter was passed to
btrfs_wait_ordered_range().
Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
These are all the cases where a variable is set, but not read which are
not bugs as far as I can see, but simply leftovers.
Still needs more review.
Found by gcc 4.6's new warnings
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
These are all the cases where a variable is set, but not
read which are really bugs.
- Couple of incorrect error handling fixed.
- One incorrect use of a allocation policy
- Some other things
Still needs more review.
Found by gcc 4.6's new warnings.
[akpm@linux-foundation.org: fix build. Might have been bitrot]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Use ERR_CAST(x) rather than ERR_PTR(PTR_ERR(x)). The former makes more
clear what is the purpose of the operation, which otherwise looks like a
no-op.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
type T;
T x;
identifier f;
@@
T f (...) { <+...
- ERR_PTR(PTR_ERR(x))
+ x
...+> }
@@
expression x;
@@
- ERR_PTR(PTR_ERR(x))
+ ERR_CAST(x)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Use memdup_user when user data is immediately copied into the
allocated region.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression from,to,size,flag;
position p;
identifier l1,l2;
@@
- to = \(kmalloc@p\|kzalloc@p\)(size,flag);
+ to = memdup_user(from,size);
if (
- to==NULL
+ IS_ERR(to)
|| ...) {
<+... when != goto l1;
- -ENOMEM
+ PTR_ERR(to)
...+>
}
- if (copy_from_user(to, from, size) != 0) {
- <+... when != goto l2;
- -EFAULT
- ...+>
- }
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
cifs: Cleanup and thus reduce smb session structure and fields used during authentication
NTLM auth and sign - Use appropriate server challenge
cifs: add kfree() on error path
NTLM auth and sign - minor error corrections and cleanup
NTLM auth and sign - Use kernel crypto apis to calculate hashes and smb signatures
NTLM auth and sign - Define crypto hash functions and create and send keys needed for key exchange
cifs: cifs_convert_address() returns zero on error
NTLM auth and sign - Allocate session key/client response dynamically
cifs: update comments - [s/GlobalSMBSesLock/cifs_file_list_lock/g]
cifs: eliminate cifsInodeInfo->write_behind_rc (try #6)
[CIFS] Fix checkpatch warnings and bump cifs version number
cifs: wait for writeback to complete in cifs_flush
cifs: convert cifsFileInfo->count to non-atomic counter
We used to protect against overflow, but rather than return an error, do
what read/write does, namely to limit the total size to MAX_RW_COUNT.
This is not only more consistent, but it also means that any broken
low-level read/write routine that still keeps counts in 'int' can't
break.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds a new mount parameter 'ecryptfs_mount_auth_tok_only' to
force ecryptfs to use only authentication tokens which signature has
been specified at mount time with parameters 'ecryptfs_sig' and
'ecryptfs_fnek_sig'. In this way, after disabling the passthrough and
the encrypted view modes, it's possible to make available to users only
files encrypted with the specified authentication token.
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Cc: Dustin Kirkland <kirkland@canonical.com>
Cc: James Morris <jmorris@namei.org>
[Tyler: Clean up coding style errors found by checkpatch]
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
This patch replaces the check of the 'matching_auth_tok' pointer with
the exit status of ecryptfs_find_auth_tok_for_sig().
This avoids to use authentication tokens obtained through the function
ecryptfs_keyring_auth_tok_for_sig which are not valid.
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Cc: Dustin Kirkland <kirkland@canonical.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
This patch allows keys requested in the function
ecryptfs_keyring_auth_tok_for_sig()to be released when they are no
longer required. In particular keys are directly released in the same
function if the obtained authentication token is not valid.
Further, a new function parameter 'auth_tok_key' has been added to
ecryptfs_find_auth_tok_for_sig() in order to provide callers the key
pointer to be passed to key_put().
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Cc: Dustin Kirkland <kirkland@canonical.com>
Cc: James Morris <jmorris@namei.org>
[Tyler: Initialize auth_tok_key to NULL in ecryptfs_parse_packet_set]
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
eCryptfs was passing the LOOKUP_OPEN flag through to the lower file
system, even though ecryptfs_create() doesn't support the flag. A valid
filp for the lower filesystem could be returned in the nameidata if the
lower file system's create() function supported LOOKUP_OPEN, possibly
resulting in unencrypted writes to the lower file.
However, this is only a potential problem in filesystems (FUSE, NFS,
CIFS, CEPH, 9p) that eCryptfs isn't known to support today.
https://bugs.launchpad.net/ecryptfs/+bug/641703
Reported-by: Kevin Buhr
Cc: stable <stable@kernel.org>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Ecryptfs is a stackable filesystem which relies on lower filesystems the
ability of setting/getting extended attributes.
If there is a security module enabled on the system it updates the
'security' field of inodes according to the owned extended attribute set
with the function vfs_setxattr(). When this function is performed on a
ecryptfs filesystem the 'security' field is not updated for the lower
filesystem since the call security_inode_post_setxattr() is missing for
the lower inode.
Further, the call security_inode_setxattr() is missing for the lower inode,
leading to policy violations in the security module because specific
checks for this hook are not performed (i. e. filesystem
'associate' permission on SELinux is not checked for the lower filesystem).
This patch replaces the call of the setxattr() method of the lower inode
in the function ecryptfs_setxattr() with vfs_setxattr().
Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Cc: stable <stable@kernel.org>
Cc: Dustin Kirkland <kirkland@canonical.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
When btrfs is mounted in degraded mode, it has some internal structures
to track the missing devices. This missing device is setup as readonly,
but the mapping code can get upset when we try to write to it.
This changes the mapping code to return -EIO instead of oops when we try
to write to the readonly device.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This patch reduces the CPU time spent in the extent buffer search by using the
radix tree instead of the rbtree and using the rcu lock instead of the spin
lock.
I did a quick test by the benchmark tool[1] and found the patch improve the
file creation/deletion performance problem that I have reported[2].
Before applying this patch:
Create files:
Total files: 50000
Total time: 0.971531
Average time: 0.000019
Delete files:
Total files: 50000
Total time: 1.366761
Average time: 0.000027
After applying this patch:
Create files:
Total files: 50000
Total time: 0.927455
Average time: 0.000019
Delete files:
Total files: 50000
Total time: 1.292280
Average time: 0.000026
[1] http://marc.info/?l=linux-btrfs&m=128212635122920&q=p3
[2] http://marc.info/?l=linux-btrfs&m=128212635122920&w=2
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
restructure try_release_extent_buffer() and write a function to release the
extent buffer. It will be used later.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
We have a fairly complex set of loops around walking our list of
delalloc inodes when we find metadata delalloc space running low.
It doesn't work very well, can use large amounts of CPU and doesn't
do very efficient writeback.
This switches us to kick the bdi flusher threads instead. All dirty
data in btrfs is accounted as delalloc data, so this is very similar
in terms of what it writes, but we're able to just kick off the IO
and wait for progress.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
An earlier commit tried to keep us from allocating too many
empty metadata chunks. It was somewhat too restrictive and could
lead to ENOSPC errors on empty filesystems.
This increases the limits to about 5% of the FS size, allowing more
metadata chunks to be preallocated.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
When btrfs is running low on metadata space, it needs to force delayed
allocation pages to disk. It currently does this with a suboptimal walk
of a private list of inodes with delayed allocation, and it would be
much better if we used the generic flusher threads.
writeback_inodes_sb_if_idle would be ideal, but it waits for the flusher
thread to start IO on all the dirty pages in the FS before it returns.
This adds variants of writeback_inodes_sb* that allow the caller to
control how many pages get sent down.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
When btrfs discovers the generation number in a btree block is
incorrect, it can loop forever without forcing the RAID
code to try a valid mirror, and without returning EIO.
This changes things to properly kick out the EIO.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
If you mount -o space_cache, the option will be persistent across mounts, but to
make sure the user knows that they did this, emit a message telling them if they
didn't mount with -o space_cache but the feature is still used.
Signed-off-by: Josef Bacik <josef@redhat.com>
If something goes wrong with the free space cache we need a way to make sure
it's not loaded on mount and that it's cleared for everybody. When you pass the
clear_cache option it will make it so all block groups are setup to be cleared,
which keeps them from being loaded and then they will be truncated when the
transaction is committed. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
There are just a few things that need to be fixed in the kernel to support mixed
data+metadata block groups. Mostly we just need to make sure that if we are
using mixed block groups that we continue to allocate mixed block groups as we
need them. Also we need to make sure __find_space_info will find our space info
if we search for DATA or METADATA only. Tested this with xfstests and it works
nicely. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
With the free space disk caching we can mark the block group as started with the
caching, but we don't have a caching ctl. This can race with anybody else who
tries to get the caching ctl before we cache (this is very hard to do btw). So
instead check to see if cache->caching_ctl is set, and if not return NULL.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
This patch actually loads the free space cache if it exists. The only thing
that really changes here is that we need to cache the block group if we're going
to remove an extent from it. Previously we did not do this since the caching
kthread would pick it up. With the on disk cache we don't have this luxury so
we need to make sure we read the on disk cache in first, and then remove the
extent, that way when the extent is unpinned the free space is added to the
block group. This has been tested with all sorts of things.
Signed-off-by: Josef Bacik <josef@redhat.com>
This is a simple bit, just dump the free space cache out to our preallocated
inode when we're writing out dirty block groups. There are a bunch of changes
in inode.c in order to account for special cases. Mostly when we're doing the
writeout we're holding trans_mutex, so we need to use the nolock transacation
functions. Also we can't do asynchronous completions since the async thread
could be blocked on already completed IO waiting for the transaction lock. This
has been tested with xfstests and btrfs filesystem balance, as well as my ENOSPC
tests. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
a) switch ->put_device() to logfs_super *
b) actually call it on early failures in logfs_get_sb_device()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
take setting s_bdev/s_mtd/s_devops to callers of logfs_get_sb_device(),
don't bother passing them separately
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
eventual replacement for ->get_sb() - does *not* get vfsmount,
return ERR_PTR(error) or root of subtree to be mounted.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
nameidata_to_filp() drops nd->path or transfers it to opened
file. In the former case it's a Bad Idea(tm) to do mnt_drop_write()
on nd->path.mnt, since we might race with umount and vfsmount in
question might be gone already.
Fix: don't drop it, then... IOW, have nameidata_to_filp() grab nd->path
in case it transfers it to file and do path_drop() in callers. After
they are through with accessing nd->path...
Reported-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Removed following fields from smb session structure
cryptkey, ntlmv2_hash, tilen, tiblob
and ntlmssp_auth structure is allocated dynamically only if the auth mech
in NTLMSSP.
response field within a session_key structure is used to initially store the
target info (either plucked from type 2 challenge packet in case of NTLMSSP
or fabricated in case of NTLMv2 without extended security) and then to store
Message Authentication Key (mak) (session key + client response).
Server challenge or cryptkey needed during a NTLMSSP authentication
is now part of ntlmssp_auth structure which gets allocated and freed
once authenticaiton process is done.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Need to have cryptkey or server challenge in smb connection
(struct TCP_Server_Info) for ntlm and ntlmv2 auth types for which
cryptkey (Encryption Key) is supplied just once in Negotiate Protocol
response during an smb connection setup for all the smb sessions over
that smb connection.
For ntlmssp, cryptkey or server challenge is provided for every
smb session in type 2 packet of ntlmssp negotiation, the cryptkey
provided during Negotiation Protocol response before smb connection
does not count.
Rename cryptKey to cryptkey and related changes.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
nfs4: The difference of 2 pointers is ptrdiff_t
nfs: testing the wrong variable
nfs: handle lock context allocation failures in nfs_create_request
Fixed Regression in NFS Direct I/O path
We need to make check if a page does not have buffes by checking
page_has_buffers(page) before calling page_buffers(page) in
ext4_writepage(). Otherwise page_buffers() could throw a BUG_ON.
Thanks also to Markus Trippelsdorf and Avinash Kurup who also reported
the problem.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Sedat Dilek <sedat.dilek@googlemail.com>
Tested-by: Sedat Dilek <sedat.dilek@googlemail.com>
fs/notify/fanotify/fanotify_user.c: In function 'fanotify_release':
fs/notify/fanotify/fanotify_user.c:375: warning: unused variable 'lre'
fs/notify/fanotify/fanotify_user.c:375: warning: unused variable 're'
this is really ugly.
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Eric Paris <eparis@redhat.com>
If fanotify sets a new bit in the ignored mask it will cause the generic
fsnotify layer to recalculate the real mask. This is stupid since we
didn't change that part.
Signed-off-by: Eric Paris <eparis@redhat.com>
fanotify has a very limited number of events it sends on directories. The
usefulness of these events is yet to be seen and still we send them. This
is particularly painful for mount marks where one might receive many of
these useless events. As such this patch will drop events on IS_DIR()
inodes unless they were explictly requested with FAN_ON_DIR.
This means that a mark on a directory without FAN_EVENT_ON_CHILD or
FAN_ON_DIR is meaningless and will result in no events ever (although it
will still be allowed since detecting it is hard)
Signed-off-by: Eric Paris <eparis@redhat.com>
The _IN_ in the naming is reserved for flags only used by inotify. Since I
am about to use this flag for fanotify rename it to be generic like the
rest.
Signed-off-by: Eric Paris <eparis@redhat.com>
fanotify_should_send_event has a test to see if an object is a file or
directory and does not send an event otherwise. The problem is that the
test is actually checking if the object with a mark is a file or directory,
not if the object the event happened on is a file or directory. We should
check the latter.
Signed-off-by: Eric Paris <eparis@redhat.com>
fanotify currently has no limit on the number of listeners a given user can
have open. This patch limits the total number of listeners per user to
128. This is the same as the inotify default limit.
Signed-off-by: Eric Paris <eparis@redhat.com>
Some fanotify groups, especially those like AV scanners, will need to place
lots of marks, particularly ignore marks. Since ignore marks do not pin
inodes in cache and are cleared if the inode is removed from core (usually
under memory pressure) we expose an interface for listeners, with
CAP_SYS_ADMIN, to override the maximum number of marks and be allowed to
set and 'unlimited' number of marks. Programs which make use of this
feature will be able to OOM a machine.
Signed-off-by: Eric Paris <eparis@redhat.com>
There is currently no limit on the number of marks a given fanotify group
can have. Since fanotify is gated on CAP_SYS_ADMIN this was not seen as
a serious DoS threat. This patch implements a default of 8192, the same as
inotify to work towards removing the CAP_SYS_ADMIN gating and eliminating
the default DoS'able status.
Signed-off-by: Eric Paris <eparis@redhat.com>
fanotify has a defualt max queue depth. This patch allows processes which
explicitly request it to have an 'unlimited' queue depth. These processes
need to be very careful to make sure they cannot fall far enough behind
that they OOM the box. Thus this flag is gated on CAP_SYS_ADMIN.
Signed-off-by: Eric Paris <eparis@redhat.com>
Currently fanotify has no maximum queue depth. Since fanotify is
CAP_SYS_ADMIN only this does not pose a normal user DoS issue, but it
certianly is possible that an fanotify listener which can't keep up could
OOM the box. This patch implements a default 16k depth. This is the same
default depth used by inotify, but given fanotify's better queue merging in
many situations this queue will contain many additional useful events by
comparison.
Signed-off-by: Eric Paris <eparis@redhat.com>
fanotify will clear ignore marks if a task changes the contents of an
inode. The problem is with the races around when userspace finishes
checking a file and when that result is actually attached to the inode.
This race was described as such:
Consider the following scenario with hostile processes A and B, and
victim process C:
1. Process A opens new file for writing. File check request is generated.
2. File check is performed in userspace. Check result is "file has no malware".
3. The "permit" response is delivered to kernel space.
4. File ignored mark set.
5. Process A writes dummy bytes to the file. File ignored flags are cleared.
6. Process B opens the same file for reading. File check request is generated.
7. File check is performed in userspace. Check result is "file has no malware".
8. Process A writes malware bytes to the file. There is no cached response yet.
9. The "permit" response is delivered to kernel space and is cached in fanotify.
10. File ignored mark set.
11. Now any process C will be permitted to open the malware file.
There is a race between steps 8 and 10
While fanotify makes no strong guarantees about systems with hostile
processes there is no reason we cannot harden against this race. We do
that by simply ignoring any ignore marks if the inode has open writers (aka
i_writecount > 0). (We actually do not ignore ignore marks if the
FAN_MARK_SURV_MODIFY flag is set)
Reported-by: Vasily Novikov <vasily.novikov@kaspersky.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
fsnotify perm events do not call fsnotify parent. That means you cannot
register a perm event on a directory and enforce permissions on all inodes in
that directory. This patch fixes that situation.
Signed-off-by: Eric Paris <eparis@redhat.com>
When fsnotify groups return errors they are ignored. For permissions
events these should be passed back up the stack, but for most events these
should continue to be ignored.
Signed-off-by: Eric Paris <eparis@redhat.com>
The fanotify listeners needs to be able to specify what types of operations
they are going to perform so they can be ordered appropriately between other
listeners doing other types of operations. They need this to be able to make
sure that things like hierarchichal storage managers will get access to inodes
before processes which need the data. This patch defines 3 possible uses
which groups must indicate in the fanotify_init() flags.
FAN_CLASS_PRE_CONTENT
FAN_CLASS_CONTENT
FAN_CLASS_NOTIF
Groups will receive notification in that order. The order between 2 groups in
the same class is undeterministic.
FAN_CLASS_PRE_CONTENT is intended to be used by listeners which need access to
the inode before they are certain that the inode contains it's final data. A
hierarchical storage manager should choose to use this class.
FAN_CLASS_CONTENT is intended to be used by listeners which need access to the
inode after it contains its intended contents. This would be the appropriate
level for an AV solution or document control system.
FAN_CLASS_NOTIF is intended for normal async notification about access, much the
same as inotify and dnotify. Syncronous permissions events are not permitted
at this class.
Signed-off-by: Eric Paris <eparis@redhat.com>
fanotify needs to be able to specify that some groups get events before
others. They use this idea to make sure that a hierarchical storage
manager gets access to files before programs which actually use them. This
is purely infrastructure. Everything will have a priority of 0, but the
infrastructure will exist for it to be non-zero.
Signed-off-by: Eric Paris <eparis@redhat.com>
We disabled the ability to build fanotify in commit 7c5347733d.
This reverts that commit and allows people to build fanotify.
Signed-off-by: Eric Paris <eparis@redhat.com>
In order to save free space cache, we need an inode to hold the data, and we
need a special item to point at the right inode for the right block group. So
first, create a special item that will point to the right inode, and the number
of extent entries we will have and the number of bitmaps we will have. We
truncate and pre-allocate space everytime to make sure it's uptodate.
This feature will be turned on as soon as you mount with -o space_cache, however
it is safe to boot into old kernels, they will just generate the cache the old
fashion way. When you boot back into a newer kernel we will notice that we
modified and not the cache and automatically discard the cache.
Signed-off-by: Josef Bacik <josef@redhat.com>
On m68k, which is 32-bit:
fs/nfs/nfs4proc.c: In function ‘nfs41_sequence_done’:
fs/nfs/nfs4proc.c:432: warning: format ‘%ld’ expects type ‘long int’, but argument 3 has type ‘int’
fs/nfs/nfs4proc.c: In function ‘nfs4_setup_sequence’:
fs/nfs/nfs4proc.c:576: warning: format ‘%ld’ expects type ‘long int’, but argument 5 has type ‘int’
On 32-bit, ptrdiff_t is int; on 64-bit, ptrdiff_t is long.
Introduced by commit dfb4f30983 ("NFSv4.1: keep
seq_res.sr_slot as pointer rather than an index")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This merges the staging-next tree to Linus's tree and resolves
some conflicts that were present due to changes in other trees that were
affected by files here.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The fourth argument should be unsigned. Also add missing include
so that the function prototype is defined in xattr_id.c
This fixes a couple of sparse warnings.
Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/hch/hfsplus:
hfsplus: free space correcly for files unlinked while open
hfsplus: fix double lock typo in ioctl
Commit 5dabfc78dc ("ext4: rename {exit,init}_ext4_*() to
ext4_{exit,init}_*()") causes
fs/ext4/super.c:4776: error: implicit declaration of function ‘ext4_init_xattr’
when CONFIG_EXT4_FS_XATTR is disabled.
It renamed init_ext4_xattr to ext4_init_xattr but forgot to update the
dummy definition in fs/ext4/xattr.h.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The intent was to test "*desc" for allocation failures, but it tests
"desc" which is always a valid pointer here.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
nfs_get_lock_context can return NULL on an allocation failure.
Regression introduced by commit f11ac8db.
Reported-by: Steve Dickson <steved@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
A typo, introduced by commit f11ac8db, in the nfs_direct_write()
routine causes writes with O_DIRECT set to fail with a ENOMEM error.
Found-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve Dickson <steved@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
SYNOPSIS
size[4] Tfsync tag[2] fid[4] datasync[4]
size[4] Rfsync tag[2]
DESCRIPTION
The Tfsync transaction transfers ("flushes") all modified in-core data of
file identified by fid to the disk device (or other permanent storage
device) where that file resides.
If datasync flag is specified data will be fleshed but does not flush
modified metadata unless that metadata is needed in order to allow a
subsequent data retrieval to be correctly handled.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
We need to do O_LARGEFILE check even in case of 9p. Use the
generic_file_open helper
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Make sure we drop inode reference in the error path
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
A create without LOOKUP_OPEN flag set is due to mknod of regular
files. Use mknod 9P operation for the same
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Synopsis
size[4] TReadlink tag[2] fid[4]
size[4] RReadlink tag[2] target[s]
Description
Readlink is used to return the contents of the symoblic link
referred by fid. Contents of symboic link is returned as a
response.
target[s] - Contents of the symbolic link referred by fid.
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Use V9FS_MAGIC as the file system type while filling kernel statfs
strucutre instead of using host file system magic number. Also move
the definition of V9FS_MAGIC from v9fs.h to standard magic.h file.
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Synopsis
size[4] TGetlock tag[2] fid[4] getlock[n]
size[4] RGetlock tag[2] getlock[n]
Description
TGetlock is used to test for the existence of byte range posix locks on a file
identified by given fid. The reply contains getlock structure. If the lock could
be placed it returns F_UNLCK in type field of getlock structure. Otherwise it
returns the details of the conflicting locks in the getlock structure
getlock structure:
type[1] - Type of lock: F_RDLCK, F_WRLCK
start[8] - Starting offset for lock
length[8] - Number of bytes to check for the lock
If length is 0, check for lock in all bytes starting at the location
'start' through to the end of file
pid[4] - PID of the process that wants to take lock/owns the task
in case of reply
client[4] - Client id of the system that owns the process which
has the conflicting lock
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Synopsis
size[4] TLock tag[2] fid[4] flock[n]
size[4] RLock tag[2] status[1]
Description
Tlock is used to acquire/release byte range posix locks on a file
identified by given fid. The reply contains status of the lock request
flock structure:
type[1] - Type of lock: F_RDLCK, F_WRLCK, F_UNLCK
flags[4] - Flags could be either of
P9_LOCK_FLAGS_BLOCK - Blocked lock request, if there is a
conflicting lock exists, wait for that lock to be released.
P9_LOCK_FLAGS_RECLAIM - Reclaim lock request, used when client is
trying to reclaim a lock after a server restrart (due to crash)
start[8] - Starting offset for lock
length[8] - Number of bytes to lock
If length is 0, lock all bytes starting at the location 'start'
through to the end of file
pid[4] - PID of the process that wants to take lock
client_id[4] - Unique client id
status[1] - Status of the lock request, can be
P9_LOCK_SUCCESS(0), P9_LOCK_BLOCKED(1), P9_LOCK_ERROR(2) or
P9_LOCK_GRACE(3)
P9_LOCK_SUCCESS - Request was successful
P9_LOCK_BLOCKED - A conflicting lock is held by another process
P9_LOCK_ERROR - Error while processing the lock request
P9_LOCK_GRACE - Server is in grace period, it can't accept new lock
requests in this period (except locks with
P9_LOCK_FLAGS_RECLAIM flag set)
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
SYNOPSIS
size[4] Tfsync tag[2] fid[4]
size[4] Rfsync tag[2]
DESCRIPTION
The Tfsync transaction transfers ("flushes") all modified in-core data of
file identified by fid to the disk device (or other permanent storage
device) where that file resides.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Theodore Ts'o
Sage Weil
Linus Torvalds
Pavel Shilovsky
Jeff Layton
Suresh Jayaraman
J. Bruce Fields
Steve French
J. Bruce Fields
Lukas Czerner
Jiri Slaby
Paul Mundt
Christoph Hellwig
Lino Sanfilippo
wu zhangjin
David Woodhouse
Chris Mason
Thomas Gleixner
Andi Kleen
Julia Lawall
Tyler Hicks
Roberto Sassu
Miao Xie
Josef Bacik
Al Viro
Shirish Pargaonkar
Andrew Morton
Eric Paris
Geert Uytterhoeven
Greg Kroah-Hartman
Phillip Lougher
Ingo Molnar
Dan Carpenter
Steve Dickson
Venkateswararao Jujjuri (JV)
Aneesh Kumar K.V
M. Mohan Kumar