We need update the acl value on chmod
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
This patch also update mode bits, as a normal file system.
I am not sure wether we should do that, considering that
a setxattr on the server will again update the ACL/mode value
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
This patch implement fetching POSIX ACL from the server
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
The ACL value is fetched as a part of inode initialization
from the server and the permission checking function use the
cached value of the ACL
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
the same calculation is done in p9_client_write
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
The presence of v9fs_direct_IO() in the address space ops vector
allowes open() O_DIRECT flags which would have failed otherwise.
In the non-cached mode, we shunt off direct read and write requests before
the VFS gets them, so this method should never be called.
Direct IO is not 'yet' supported in the cached mode. Hence when
this routine is called through generic_file_aio_read(), the read/write fails
with an error.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
The current implementation of 9p client mkdir function does not
set the S_ISGID mode bit for the directory being created if the
parent directory has this bit set. This patch fixes this problem
so that the newly created directory inherits the gid from parent
directory and not from the process creating this directory, when
the S_ISGID bit is set in parent directory.
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
A patch was accepted recently for sending correct buffer size to p9stat_read.
We need a similar patch in v9fs_dir_readdir_dotl to send correct end of buffer
to p9dirent_read.
Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Current 9p client file write code does not check for RLIMIT_FSIZE resource.
This bug was found by running LTP test case for setrlimit. This bug is fixed
by calling generic_write_checks before sending the write request to the
server.
Without this patch: the write function is allowed to write above the
RLIMIT_FSIZE set by user.
With this patch: the write function checks for RLIMIT_SIZE and writes upto
the size limit.
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
git_t is unsigned an can never be less than zero.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
* 'upstream-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (50 commits)
ext4,jbd2: convert tracepoints to use major/minor numbers
ext4: optimize orphan_list handling for ext4_setattr
ext4: fix unbalanced mutex unlock in error path of ext4_li_request_new
ext4: fix compile error in ext4_fallocate()
ext4: move ext4_mb_{get,put}_buddy_cache_lock and make them static
ext4: rename mark_bitmap_end() to ext4_mark_bitmap_end()
ext4: move flush_completed_IO to fs/ext4/fsync.c and make it static
ext4: rename {ext,idx}_pblock and inline small extent functions
ext4: make various ext4 functions be static
ext4: rename {exit,init}_ext4_*() to ext4_{exit,init}_*()
ext4: fix kernel oops if the journal superblock has a non-zero j_errno
ext4: update writeback_index based on last page scanned
ext4: implement writeback livelock avoidance using page tagging
ext4: tidy up a void argument in inode.c
ext4: add batched_discard into ext4 feature list
ext4: Add batched discard support for ext4
fs: Add FITRIM ioctl
ext4: Use return value from sb_issue_discard()
ext4: Check return value of sb_getblk() and friends
ext4: use bio layer instead of buffer layer in mpage_da_submit_io
...
This reverts commit d91f2438d8.
The intent of issue_seq is to distinguish between mds->client messages that
(re)create the cap and those that do not, which means we should _only_ be
updating that value in the create paths. By updating it in handle_cap_grant,
we reset it to zero, which then breaks release.
The larger question is what workload/problem made me think it should be
updated here...
Signed-off-by: Sage Weil <sage@newdream.net>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (24 commits)
quota: Fix possible oops in __dquot_initialize()
ext3: Update kernel-doc comments
jbd/2: fixed typos
ext2: fixed typo.
ext3: Fix debug messages in ext3_group_extend()
jbd: Convert atomic_inc() to get_bh()
ext3: Remove misplaced BUFFER_TRACE() in ext3_truncate()
jbd: Fix debug message in do_get_write_access()
jbd: Check return value of __getblk()
ext3: Use DIV_ROUND_UP() on group desc block counting
ext3: Return proper error code on ext3_fill_super()
ext3: Remove unnecessary casts on bh->b_data
ext3: Cleanup ext3_setup_super()
quota: Fix issuing of warnings from dquot_transfer
quota: fix dquot_disable vs dquot_transfer race v2
jbd: Convert bitops to buffer fns
ext3/jbd: Avoid WARN() messages when failing to write the superblock
jbd: Use offset_in_page() instead of manual calculation
jbd: Remove unnecessary goto statement
jbd: Use printk_ratelimited() in journal_alloc_journal_head()
...
Surprisingly chown() on ext4 is not SMP scalable operation.
Due to unconditional orphan_del(NULL, inode) in ext4_setattr()
result in significant performance overhead because of global orphan
mutex, especially in no-journal mode (where orphan_add() is noop).
It is possible to skip explicit orphan_del if possible.
Results of fchown() micro-benchmark in no-journal mode
while (1) {
iteration++;
fchown(fd, uid, gid);
fchown(fd, uid + 1, gid + 1)
}
measured: iterations per millisecond
| nr_tasks | w/o patch | with patch |
| 1 | 142 | 185 |
| 4 | 109 | 642 |
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* akpm-incoming-2: (139 commits)
epoll: make epoll_wait() use the hrtimer range feature
select: rename estimate_accuracy() to select_estimate_accuracy()
Remove duplicate includes from many files
ramoops: use the platform data structure instead of module params
kernel/resource.c: handle reinsertion of an already-inserted resource
kfifo: fix kfifo_alloc() to return a signed int value
w1: don't allow arbitrary users to remove w1 devices
alpha: remove dma64_addr_t usage
mips: remove dma64_addr_t usage
sparc: remove dma64_addr_t usage
fuse: use release_pages()
taskstats: use real microsecond granularity for CPU times
taskstats: split fill_pid function
taskstats: separate taskstats commands
delayacct: align to 8 byte boundary on 64-bit systems
delay-accounting: reimplement -c for getdelays.c to report information on a target command
namespaces Kconfig: move namespace menu location after the cgroup
namespaces Kconfig: remove the cgroup device whitelist experimental tag
namespaces Kconfig: remove pointless cgroup dependency
namespaces Kconfig: make namespace a submenu
...
When I compiled 2.6.36-rc3 kernel with EXT4FS_DEBUG definition, I got
the following compile error.
CC [M] fs/ext4/extents.o
fs/ext4/extents.c: In function 'ext4_fallocate':
fs/ext4/extents.c:3772: error: 'block' undeclared (first use in this function)
fs/ext4/extents.c:3772: error: (Each undeclared identifier is reported only once
fs/ext4/extents.c:3772: error: for each function it appears in.)
make[2]: *** [fs/ext4/extents.o] Error 1
The patch fixes this problem.
Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
These functions are only used within fs/ext4/mballoc.c, so move them
so they are used after they are defined, and then make them be static.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cleanup namespace leaks from fs/ext4 and the inline trivial functions
ext4_{ext,idx}_pblock() and ext4_{ext,idx}_store_pblock() since the
code size actually shrinks when we make these functions inline,
they're so trivial.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
These functions have no need to be exported beyond file context.
No functions needed to be moved for this commit; just some function
declarations changed to be static and removed from header files.
(A similar patch was submitted by Eric Sandeen, but I wanted to handle
code movement in separate patches to make sure code changes didn't
accidentally get dropped.)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit 84061e0 fixed an accounting bug only to introduce the
possibility of a kernel OOPS if the journal has a non-zero j_errno
field indicating that the file system had detected a fs inconsistency.
After the journal replay, if the journal superblock indicates that the
file system has an error, this indication is transfered to the file
system and then ext4_commit_super() is called to write this to the
disk.
But since the percpu counters are now initialized after the journal
replay, the call to ext4_commit_super() will cause a kernel oops since
it needs to use the percpu counters the ext4 superblock structure.
The fix is to skip setting the ext4 free block and free inode fields
if the percpu counter has not been set.
Thanks to Ken Sumrall for reporting and analyzing the root causes of
this bug.
Addresses-Google-Bug: #3054080
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
As pointed out in a prior patch, updating the mapping's
writeback_index based on pages written isn't quite right;
what the writeback index is really supposed to reflect is
the next page which should be scanned for writeback during
periodic flush.
As in write_cache_pages(), write_cache_pages_da() does
this scanning for us as we assemble the mpd for later
writeout. If we keep track of the next page after the
current scan, we can easily update writeback_index without
worrying about pages written vs. pages skipped, etc.
Without this, an fsync will reset writeback_index to
0 (its starting index) + however many pages it wrote, which
can mess up the progress of periodic flush.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This is analogous to Jan Kara's commit,
f446daaea9
mm: implement writeback livelock avoidance using page tagging
but since we forked write_cache_pages, we need to reimplement
it there (and in ext4_da_writepages, since range_cyclic handling
was moved to there)
If you start a large buffered IO to a file, and then set
fsync after it, you'll find that fsync does not complete
until the other IO stops.
If you continue re-dirtying the file (say, putting dd
with conv=notrunc in a loop), when fsync finally completes
(after all IO is done), it reports via tracing that
it has written many more pages than the file contains;
in other words it has synced and re-synced pages in
the file multiple times.
This then leads to problems with our writeback_index
update, since it advances it by pages written, and
essentially sets writeback_index off the end of the
file...
With the following patch, we only sync as much as was
dirty at the time of the sync.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This doesn't fix anything at all, it just removes a vestige
of prior use from __mpage_da_writepage()
__mpage_da_writepage() had a *void argument leftover from
its previous life as a callback; make it reflect the actual type.
Fixing this up makes it slightly more obvious to read, and
enables proper typechecking.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Should be applied on the top of "lazy inode table initialization"
and "batched discard support" patch-sets.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Walk through allocation groups and trim all free extents. It can be
invoked through FITRIM ioctl on the file system. The main idea is to
provide a way to trim the whole file system if needed, since some SSD's
may suffer from performance loss after the whole device was filled (it
does not mean that fs is full!).
It search for free extents in allocation groups specified by Byte range
start -> start+len. When the free extent is within this range, blocks
are marked as used and then trimmed. Afterwards these blocks are marked
as free in per-group bitmap.
Since fstrim is a long operation it is good to have an ability to
interrupt it by a signal. This was added by Dmitry Monakhov.
Thanks Dimitry.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Adds an filesystem independent ioctl to allow implementation of file
system batched discard support. I takes fstrim_range structure as an
argument. fstrim_range is definec in the include/fs.h and its
definition is as follows.
struct fstrim_range {
start;
len;
minlen;
}
start - first Byte to trim
len - number of Bytes to trim from start
minlen - minimum extent length to trim, free extents shorter than this
number of Bytes will be ignored. This will be rounded up to fs
block size.
It is also possible to specify NULL as an argument. In this case the
arguments will set itself as follows:
start = 0;
len = ULLONG_MAX;
minlen = 0;
So it will trim the whole file system at one run.
After the FITRIM is done, the number of actually discarded Bytes is stored
in fstrim_range.len to give the user better insight on how much storage
space has been really released for wear-leveling.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use return value from sb_issue_discard() as return value in
ext4_issue_discard(). Since sb_issue_discard() may result in more
serious errors than just -EOPNOTSUPP it is worth to inform user of this
function about them to handle error cases properly.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fail block allocation if sb_getblk() returns NULL. In that case,
sb_find_get_block() also likely to fail so that it should skip
calling ext4_forget().
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Call the block I/O layer directly instad of going through the buffer
layer. This should give us much better performance and scalability,
as well as lowering our CPU utilization when doing buffered writeback.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This massively simplifies the ext4_da_writepages() code path by
completely removing mpage_put_bnr_bhs(), which is almost 100 lines of
code iterating over a set of pages using pagevec_lookup(), and folds
that functionality into mpage_da_submit_io()'s existing
pagevec_lookup() loop.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Expand the call:
if (walk_page_buffers(NULL, page_bufs, 0, len, NULL,
ext4_bh_delay_or_unwritten))
goto redirty_page
into mpage_da_submit_io().
This will allow us to merge in mpage_put_bnr_to_bhs() in the next
patch.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
As a prepratory step to switching to bio_submit, inline
ext4_writepage() into mpage_da_submit() and then simplify things a
bit. This makes it clearer what mpage_da_submit needs to do.
Also, move the ClearPageChecked(page) call into
__ext4_journalled_writepage(), as a minor bit of cleanup refactoring.
This also allows us to pull i_size_read() and
ext4_should_journal_data() out of the loop, which should be a very
minor CPU savings.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The actual code in ext4_writepage() is unnecessarily convoluted.
Simplify it so it is easier to understand, but otherwise logically
equivalent.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Eventually we need to completely reorganize the ext4 writepage
callpath, but for now, we simplify things a little by calling
mpage_da_submit_io() from mpage_da_map_blocks(), since all of the
places where we call mpage_da_map_blocks() it is followed up by a call
to mpage_da_submit_io().
We're also a wee bit better with respect to error handling, but there
are still a number of issues where it's not clear what the right thing
is to do with ext4 functions deep in the writeback codepath fails.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Also remove the SLAB_RECLAIM_ACCOUNT flag from the system zone kmem
cache. This slab tends to be fairly static, so it shouldn't be marked
as likely to have free pages that can be reclaimed.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use the search_dirblock() in ext4_dx_find_entry(). It makes the code
easier to read, and it takes advantage of common code. It also saves
100 bytes or so of text space.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Brad Spengler <spender@grsecurity.net>
If the first block of htree directory is missing '.' or '..' but is
otherwise a valid directory, and we do a lookup for '.' or '..', it's
possible to dereference an uninitialized memory pointer in
ext4_htree_next_block().
We avoid this by moving the special case from ext4_dx_find_entry() to
ext4_find_entry(); this also means we can optimize ext4_find_entry()
slightly when NFS looks up "..".
Thanks to Brad Spengler for pointing a Clang warning that led me to
look more closely at this code. The warning was harmless, but it was
useful in pointing out code that was too ugly to live. This warning was
also reported by Roman Borisov.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Brad Spengler <spender@grsecurity.net>
Not that these take up a lot of room, but the structure is long enough
as it is, and there's no need to confuse people with these various
undocumented & unused structure members...
Signed-off-by: Eric Sandeen <sandeen@redaht.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
By queuing the io end on the unwritten workqueue before adding it
to our inode's list of completed IOs, I think we run the risk
of the work getting completed, and the IO freed, before we try
to add it to the inode's i_completed_io_list.
It should be safe to add it to the inode's list of completed
IOs, and -then- queue it for completion, I think.
Thanks to Dave Chinner for pointing out the race.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Jiaying Zhang <jiayingz@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Many tracepoints were populating an ext4_allocation_context
to pass in, but this requires a slab allocation even when
tracepoints are off. In fact, 4 of 5 of these allocations
were only for tracing. In addition, we were only using a
small fraction of the 144 bytes of this structure for this
purpose.
We can do away with all these alloc/frees of the ac and
simply pass in the bits we care about, instead.
I tested this by turning on tracing and running through
xfstests on x86_64. I did not actually do anything with
the trace output, however.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
On linux-2.6.36-rc2, if we execute the following script, we can hang
the system when the /bin/sync command is executed:
========================================================================
#!/bin/sh
echo -n "HANG UP TEST: "
/bin/dd if=/dev/zero of=/tmp/img bs=1k count=1 seek=1M 2> /dev/null
/sbin/mkfs.ext4 -Fq /tmp/img
/bin/mount -o loop -t ext4 /tmp/img /mnt
/bin/dd if=/dev/zero of=/mnt/file bs=1 count=1 \
seek=$((16*1024*1024*1024*1024-4096)) 2> /dev/null
/bin/sync
/bin/umount /mnt
echo "DONE"
exit 0
========================================================================
We can see the following backtrace if we get the kdump when this
hangup occurs:
======================================================================
kthread()
=> bdi_writeback_thread()
=> wb_do_writeback()
=> wb_writeback()
=> writeback_inodes_wb()
=> writeback_sb_inodes()
=> writeback_single_inode()
=> ext4_da_writepages() ---+
^ infinite |
| loop |
+-------------+
======================================================================
The reason why this hangup happens is described as follows:
1) We write the last extent block of the file whose size is the filesystem
maximum size.
2) "BH_Delay" flag is set on the buffer_head of its block.
3) - the member, "m_lblk" of struct mpage_da_data is 4294967295 (UINT_MAX)
- the member, "m_len" of struct mpage_da_data is 1
mpage_put_bnr_to_bhs() which is called via ext4_da_writepages()
cannot clear "BH_Delay" flag of the buffer_head because the type of
m_lblk is ext4_lblk_t and then m_lblk + m_len is overflow.
Therefore an infinite loop occurs because ext4_da_writepages()
cannot write the page (which corresponds to the block) since
"BH_Delay" flag isn't cleared.
----------------------------------------------------------------------
static void mpage_put_bnr_to_bhs(struct mpage_da_data *mpd,
struct ext4_map_blocks *map)
{
...
int blocks = map->m_len;
...
do {
// cur_logical = 4294967295
// map->m_lblk = 4294967295
// blocks = 1
// *** map->m_lblk + blocks == 0 (OVERFLOW!) ***
// (cur_logical >= map->m_lblk + blocks) => true
if (cur_logical >= map->m_lblk + blocks)
break;
----------------------------------------------------------------------
NOTE: Mounting with the nodelalloc option will avoid this codepath,
and thus, avoid this hang
Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The llseek system call should return EINVAL if passed a seek offset
which results in a write error. What this maximum offset should be
depends on whether or not the huge_file file system feature is set,
and whether or not the file is extent based or not.
If the file has no "EXT4_EXTENTS_FL" flag, the maximum size which can be
written (write systemcall) is different from the maximum size which can be
sought (lseek systemcall).
For example, the following 2 cases demonstrates the differences
between the maximum size which can be written, versus the seek offset
allowed by the llseek system call:
#1: mkfs.ext3 <dev>; mount -t ext4 <dev>
#2: mkfs.ext3 <dev>; tune2fs -Oextent,huge_file <dev>; mount -t ext4 <dev>
Table. the max file size which we can write or seek
at each filesystem feature tuning and file flag setting
+============+===============================+===============================+
| \ File flag| | |
| \ | !EXT4_EXTENTS_FL | EXT4_EXTETNS_FL |
|case \| | |
+------------+-------------------------------+-------------------------------+
| #1 | write: 2194719883264 | write: -------------- |
| | seek: 2199023251456 | seek: -------------- |
+------------+-------------------------------+-------------------------------+
| #2 | write: 4402345721856 | write: 17592186044415 |
| | seek: 17592186044415 | seek: 17592186044415 |
+------------+-------------------------------+-------------------------------+
The differences exist because ext4 has 2 maxbytes which are sb->s_maxbytes
(= extent-mapped maxbytes) and EXT4_SB(sb)->s_bitmap_maxbytes (= block-mapped
maxbytes). Although generic_file_llseek uses only extent-mapped maxbytes.
(llseek of ext4_file_operations is generic_file_llseek which uses
sb->s_maxbytes.)
Therefore we create ext4 llseek function which uses 2 maxbytes.
The new own function originates from generic_file_llseek().
If the file flag, "EXT4_EXTENTS_FL" is not set, the function alters
inode->i_sb->s_maxbytes into EXT4_SB(inode->i_sb)->s_bitmap_maxbytes.
Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
An ext4 filesystem on a read-only device, with an external journal
which is at a different device number then recorded in the superblock
will fail to honor the read-only setting of the device and trigger
a superblock update (write).
For example:
- ext4 on a software raid which is in read-only mode
- external journal on a read-write device which has changed device num
- attempt to mount with -o journal_dev=<new_number>
- hits BUG_ON(mddev->ro = 1) in md.c
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Maciej Żenczykowski <zenczykowski@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Change ext4_ext_zeroout to use sb_issue_zeroout instead of its
own approach to zero out extents.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use sb_issue_zeroout to zero out inode table and descriptor table
blocks instead of old approach which involves journaling.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
User-space should have the opportunity to check what features doest ext4
support in each particular copy. This adds easy interface by creating new
"features" directory in sys/fs/ext4/. In that directory files
advertising feature names can be created.
Add lazy_itable_init to the feature list.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When the lazy_itable_init extended option is passed to mke2fs, it
considerably speeds up filesystem creation because inode tables are
not zeroed out. The fact that parts of the inode table are
uninitialized is not a problem so long as the block group descriptors,
which contain information regarding how much of the inode table has
been initialized, has not been corrupted However, if the block group
checksums are not valid, e2fsck must scan the entire inode table, and
the the old, uninitialized data could potentially cause e2fsck to
report false problems.
Hence, it is important for the inode tables to be initialized as soon
as possble. This commit adds this feature so that mke2fs can safely
use the lazy inode table initialization feature to speed up formatting
file systems.
This is done via a new new kernel thread called ext4lazyinit, which is
created on demand and destroyed, when it is no longer needed. There
is only one thread for all ext4 filesystems in the system. When the
first filesystem with inititable mount option is mounted, ext4lazyinit
thread is created, then the filesystem can register its request in the
request list.
This thread then walks through the list of requests picking up
scheduled requests and invoking ext4_init_inode_table(). Next schedule
time for the request is computed by multiplying the time it took to
zero out last inode table with wait multiplier, which can be set with
the (init_itable=n) mount option (default is 10). We are doing
this so we do not take the whole I/O bandwidth. When the thread is no
longer necessary (request list is empty) it frees the appropriate
structures and exits (and can be created later later by another
filesystem).
We do not disturb regular inode allocations in any way, it just do not
care whether the inode table is, or is not zeroed. But when zeroing, we
have to skip used inodes, obviously. Also we should prevent new inode
allocations from the group, while zeroing is on the way. For that we
take write alloc_sem lock in ext4_init_inode_table() and read alloc_sem
in the ext4_claim_inode, so when we are unlucky and allocator hits the
group which is currently being zeroed, it just has to wait.
This can be suppresed using the mount option no_init_itable.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
An attempt to modify the file system during the call to
jbd2_destroy_journal() can lead to a system lockup. So add some
checking to make it much more obvious when this happens to and to
determine where the offending code is located.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We can't hold the block group spinlock because we ext4_issue_discard()
calls wait and hence can get rescheduled.
Google-Bug-Id: 3017678
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
I'm uneasy with lots of stuff going on in ext4_da_writepages(),
but bumping nr_to_write from LLONG_MAX to -8 clearly isn't
making anything better, so avoid the multiplier in that case.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Today we simply break out of the inner loop when we have accumulated
max_pages; this keeps scanning forwad and doing pagevec_lookup_tag()
in the while (!done) loop, this does potentially a lot of work
with no net effect.
When we have accumulated max_pages, just clean up and return.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext4_group_info structures are currently allocated with kmalloc().
With a typical 4K block size, these are 136 bytes each -- meaning
they'll each consume a 256-byte slab object. On a system with many
ext4 large partitions, that's a lot of wasted kernel slab space.
(E.g., a single 1TB partition will have about 8000 block groups, using
about 2MB of slab, of which nearly 1MB is wasted.)
This patch creates an array of slab pointers created as needed --
depending on the superblock block size -- and uses these slabs to
allocate the group info objects.
Google-Bug-Id: 2980809
Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This fixes a hang seen in jbd2_journal_release_jbd_inode
on a lot of Power 6 systems running with ext4. When we get
in the hung state, all I/O to the disk in question gets blocked
where we stay indefinitely. Looking at the task list, I can see
we are stuck in jbd2_journal_release_jbd_inode waiting on a
wake up. I added some debug code to detect this scenario and
dump additional data if we were stuck in jbd2_journal_release_jbd_inode
for longer than 30 minutes. When it hit, I was able to see that
i_flags was 0, suggesting we missed the wake up.
This patch changes i_flags to be an unsigned long, uses bit operators
to access it, and adds barriers around the accesses. Prior to applying
this patch, we were regularly hitting this hang on numerous systems
in our test environment. After applying the patch, the hangs no longer
occur.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
It turns out we have several problems with how EOFBLOCKS_FL is
handled. First of all, there was a fencepost error where we were not
clearing the EOFBLOCKS_FL when fill in the last uninitialized block,
but rather when we allocate the next block _after_ the uninitalized
block. Secondly we were not testing to see if we needed to clear the
EOFBLOCKS_FL when writing to the file O_DIRECT or when were converting
an uninitialized block (which is the most common case).
Google-Bug-Id: 2928259
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In commit f7347ce4ee ("fasync: re-organize fasync entry insertion to
allow it under a spinlock") Arnd took an earlier patch of mine that had
the comment about the FASYNC flag above the wrong function.
When the fasync_add_entry() function was split to introduce the new
fasync_insert_entry() helper function, the code that actually cares
about the FASYNC bit moved to that new helper.
So just move the comment to the right point.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'flock' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
locks: turn lock_flocks into a spinlock
fasync: re-organize fasync entry insertion to allow it under a spinlock
locks/nfsd: allocate file lock outside of spinlock
lockd: fix nlmsvc_notify_blocked locking
lockd: push lock_flocks down
This make epoll use hrtimers for the timeout value which prevents
epoll_wait() from timing out up to a millisecond early.
This mirrors the behavior of select() and poll().
Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make it a subsystem-specific identifier because we wish to amke it
non-static in the next patch ("epoll: make epoll_wait() use the hrtimer
range feature").
Cc: Shawn Bohrer <shawn.bohrer@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Davide Libenzi <davidel@xmailserver.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replace iterated page_cache_release() with release_pages(), which is
faster and shorter.
Needs release_pages() to be exported to modules.
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Presently do_execve() turns PF_KTHREAD off before search_binary_handler().
THis has a theorical risk of PF_KTHREAD getting lost. We don't have to
turn PF_KTHREAD off in the ENOEXEC case.
This patch moves this flag modification to after the finding of the
executable file.
This is only a theorical issue because kthreads do not call do_execve()
directly. But fixing would be better.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In /proc/stat, the number of per-IRQ event is shown by making a sum each
irq's events on all cpus. But we can make use of kstat_irqs().
kstat_irqs() do the same calculation, If !CONFIG_GENERIC_HARDIRQ,
it's not a big cost. (Both of the number of cpus and irqs are small.)
If a system is very big and CONFIG_GENERIC_HARDIRQ, it does
for_each_irq()
for_each_cpu()
- look up a radix tree
- read desc->irq_stat[cpu]
This seems not efficient. This patch adds kstat_irqs() for
CONFIG_GENRIC_HARDIRQ and change the calculation as
for_each_irq()
look up radix tree
for_each_cpu()
- read desc->irq_stat[cpu]
This reduces cost.
A test on (4096cpusp, 256 nodes, 4592 irqs) host (by Jack Steiner)
%time cat /proc/stat > /dev/null
Before Patch: 2.459 sec
After Patch : .561 sec
[akpm@linux-foundation.org: unexport kstat_irqs, coding-style tweaks]
[akpm@linux-foundation.org: fix unused variable 'per_irq_sum']
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: Jack Steiner <steiner@sgi.com>
Acked-by: Jack Steiner <steiner@sgi.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
/proc/stat shows the total number of all interrupts to each cpu. But when
the number of IRQs are very large, it take very long time and 'cat
/proc/stat' takes more than 10 secs. This is because sum of all irq
events are counted when /proc/stat is read. This patch adds "sum of all
irq" counter percpu and reduce read costs.
The cost of reading /proc/stat is important because it's used by major
applications as 'top', 'ps', 'w', etc....
A test on a mechin (4096cpu, 256 nodes, 4592 irqs) shows
%time cat /proc/stat > /dev/null
Before Patch: 12.627 sec
After Patch: 2.459 sec
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: Jack Steiner <steiner@sgi.com>
Acked-by: Jack Steiner <steiner@sgi.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The length of the BLOCK_IPOLL string is making i's value be printed too
far to the right. This patch fixes this and makes the output a bit
neater.
Currently:
CPU0
HI: 0
TIMER: 599792
NET_TX: 2
NET_RX: 6
BLOCK: 80807
BLOCK_IOPOLL: 0
TASKLET: 20012
SCHED: 0
HRTIMER: 63
RCU: 619279
With patch:
CPU0
HI: 0
TIMER: 585582
NET_TX: 2
NET_RX: 6
BLOCK: 80320
BLOCK_IOPOLL: 0
TASKLET: 19287
SCHED: 0
HRTIMER: 62
RCU: 604441
Signed-off-by: Davidlohr Bueso <dave@gnu.org>
Acked-by: Keika Kobayashi <kobayashi.kk@ncos.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Export the number of anonymous pages in a mapping via smaps.
Even the private pages in a mapping backed by a file, would be marked as
anonymous, when they are modified. Export this information to user-space via
smaps.
Exporting this count will help gdb to make a better decision on which
areas need to be dumped in its coredump; and should be useful to others
studying the memory usage of a process.
Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Acked-by: Hugh Dickins <hughd@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The userland ELF tools have been coping with partial-segments core files
for a few years now. Multiple distro builds are now setting this option.
It behooves everyone who ever deals with core files to have more info
dumped in there, especially as more and more people's compilers are
producing build IDs. Make it the default.
Anyone using older tools confused by these core files can configure this
option off, or just change /proc/PID/coredump_filter after boot.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We met a parameter truncated issue, consider following:
> echo "|/root/core_pattern_pipe_test %p /usr/libexec/blah-blah-blah \
%s %c %p %u %g 11 12345678901234567890123456789012345678 %t" > \
/proc/sys/kernel/core_pattern
This is okay because the strings is less than CORENAME_MAX_SIZE. "cat
/proc/sys/kernel/core_pattern" shows the whole string. but after we run
core_pattern_pipe_test in man page, we found last parameter was truncated
like below:
argc[10]=<12807486>
The root cause is core_pattern allows % specifiers, which need to be
replaced during parse time, but the replace may expand the strings to
larger than CORENAME_MAX_SIZE. So if the last parameter is % specifiers,
the replace code is using snprintf(out_ptr, out_end - out_ptr, ...), this
will write out of corename array.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Neil Horman <nhorman@tuxdriver.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov pointed out we have to prevent multiple-threads-inside-exec
itself and we can reuse ->cred_guard_mutex for it. Yes, concurrent
execve() has no worth.
Let's move ->cred_guard_mutex from task_struct to signal_struct. It
naturally prevent multiple-threads-inside-exec.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If a CD has both Rock Ridge and Joliet extensions and the ISO root
directory is empty, no files are visible. Disable Rock Ridge extensions
in this case and use Joliet root directory instead.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We leak 256 bytes here on this error path.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
When quotaon(8) races with __dquot_initialize() or dqget() fails because
of EIO, ENOSPC, or similar error, we could possibly dereference NULL pointer
in inode->i_dquot[cnt]. Add proper checking.
Reported-by: Dmitry Monakhov <dmonakhov@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Update missing/broken argument descriptions and fix formatting.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Convert atomic_inc(&bh->b_count) to get_bh(bh) for consistency.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Fail journal creation if __getblk() returns NULL. unlikely() is
added because it is called in a loop and we've been OK without
the check until now.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
bh->b_data is already a pointer to char so casts to 'char *' should
be meaningless. Remove them.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Fix mount-count check to emit warning only if s_max_mnt_count
is greater than 0 according to man tune2fs(8). Also removes
unnecessary casts.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
__dquot_transfer accidentally called flush_warnings for a wrong set of
dquots which could result in quota warnings being issued with a wrong
identification. Also when operation fails because of EDQUOT, there's no
need check for issuing information message about user getting below limits
(no transfer has actually happened).
Signed-off-by: Jan Kara <jack@suse.cz>
I've got following lockup:
dquot_disable dquot_transfer
->dqget()
sb_has_quota_active
dqopt->flags &= ~dquot_state_flag(f, cnt) atomic_inc(dq->dq_count)
->drop_dquot_ref(sb, cnt);
down_write(dqptr_sem)
inode->i_dquot[cnt] = NULL ->__dquot_transfer
invalidate_dquots(sb, cnt); down_write(&dqptr_sem)
->wait for dq_wait_unused inode->i_dquot = new_dquot
/* wait forever */ ^^^^New quota user^^^^^^
We cannot allow new references to dquots from inodes after drop_dquot_ref()
has removed them. We have to recheck quota state under dqptr_sem and before
assignment, as we do it in dquot_initialize().
Signed-off-by: Dmitry Monakhov <dmonakhov@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Convert set/clear_bit(BH_JWrite, ...) to set/clear_buffer_jwrite()
for consistency.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
This fixes a WARN backtrace in mark_buffer_dirty() that occurs during unmount
when the underlying block device is removed. This bug has been seen on System
Z when removing all paths from a multipath-backed ext3 mount; on System P when
injecting enough PCI EEH errors to make the SCSI controller go offline; and
similar warnings have been seen (and patched) with ext2/ext4.
The super block update from a previous operation has marked the buffer as in
error, and the flag has to be cleared before doing the update. Similar changes
have been made to ext4 by commit 914258bf2c.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Remove goto statement which jumps to very next line. Also remove
target label because it is no longer used anywhere.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Move call to jbd_debug() into #ifdef CONFIG_JBD_DEBUG block because
'dropped' is declared there. The code could be compiled without this
change anyway, simply because jbd_debug() expands to nothing if
!CONFIG_JBD_DEBUG but IMHO it doesn't look good in general.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
@handle doesn't exist in ext2. Remove it.
Also, fit comment header into kernel-doc format.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Nothing depends on lock_flocks using the BKL
any more, so we can do the switch over to
a private spinlock.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
You currently cannot use "fasync_helper()" in an atomic environment to
insert a new fasync entry, because it will need to allocate the new
"struct fasync_struct".
Yet fcntl_setlease() wants to call this under lock_flocks(), which is in
the process of being converted from the BKL to a spinlock.
In order to fix this, this abstracts out the actual fasync list
insertion and the fasync allocations into functions of their own, and
teaches fs/locks.c to pre-allocate the fasync_struct entry. That way
the actual list insertion can happen while holding the required
spinlock.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bfields@redhat.com: rebase on top of my changes to Arnd's patch]
Tested-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As suggested by Christoph Hellwig, this moves allocation
of new file locks out of generic_setlease into the
callers, nfs4_open_delegation and fcntl_setlease in order
to allow GFP_KERNEL allocations when lock_flocks has
become a spinlock.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: J. Bruce Fields <bfields@redhat.com>
nlmsvc_notify_blocked walks the nlm_blocked list,
which requires nlm_blocked_lock.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
lockd should use lock_flocks() instead of lock_kernel()
to lock against posix locks accessing the i_flock list.
This is a prerequisite to turning lock_flocks into a
spinlock.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: J. Bruce Fields <bfields@redhat.com>
hfsplus_delete_inode only truncates away all block allocations if
i_nlink is zero. Make sure we properly drop the unlink count even
when doing the rename hack for open but unlinked files.
Signed-off-by: Christoph Hellwig <hch@tuxera.com>
Minor cleanup - Fix spelling mistake, make meaningful (goto) label
In function setup_ntlmv2_rsp(), do not return 0 and leak memory,
let the tiblob get freed.
For function find_domain_name(), pass already available nls table pointer
instead of loading and unloading the table again in this function.
For ntlmv2, the case sensitive password length is the length of the
response, so subtract session key length (16 bytes) from the .len.
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (52 commits)
split invalidate_inodes()
fs: skip I_FREEING inodes in writeback_sb_inodes
fs: fold invalidate_list into invalidate_inodes
fs: do not drop inode_lock in dispose_list
fs: inode split IO and LRU lists
fs: switch bdev inode bdi's correctly
fs: fix buffer invalidation in invalidate_list
fsnotify: use dget_parent
smbfs: use dget_parent
exportfs: use dget_parent
fs: use RCU read side protection in d_validate
fs: clean up dentry lru modification
fs: split __shrink_dcache_sb
fs: improve DCACHE_REFERENCED usage
fs: use percpu counter for nr_dentry and nr_dentry_unused
fs: simplify __d_free
fs: take dcache_lock inside __d_path
fs: do not assign default i_ino in new_inode
fs: introduce a per-cpu last_ino allocator
new helper: ihold()
...
* akpm-incoming-1: (176 commits)
scripts/checkpatch.pl: add check for declaration of pci_device_id
scripts/checkpatch.pl: add warnings for static char that could be static const char
checkpatch: version 0.31
checkpatch: statement/block context analyser should look at sanitised lines
checkpatch: handle EXPORT_SYMBOL for DEVICE_ATTR and similar
checkpatch: clean up structure definition macro handline
checkpatch: update copyright dates
checkpatch: Add additional attribute #defines
checkpatch: check for incorrect permissions
checkpatch: ensure kconfig help checks only apply when we are adding help
checkpatch: simplify and consolidate "missing space after" checks
checkpatch: add check for space after struct, union, and enum
checkpatch: returning errno typically should be negative
checkpatch: handle casts better fixing false categorisation of : as binary
checkpatch: ensure we do not collapse bracketed sections into constants
checkpatch: suggest cleanpatch and cleanfile when appropriate
checkpatch: types may sit on a line on their own
checkpatch: fix regressions in "fix handling of leading spaces"
div64_u64(): improve precision on 32bit platforms
lib/parser: cleanup match_number()
...
PF_FLUSHER is only ever set, not tested, remove it.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Robin Holt tried to boot a 16TB system and found af_unix was overflowing
a 32bit value :
<quote>
We were seeing a failure which prevented boot. The kernel was incapable
of creating either a named pipe or unix domain socket. This comes down
to a common kernel function called unix_create1() which does:
atomic_inc(&unix_nr_socks);
if (atomic_read(&unix_nr_socks) > 2 * get_max_files())
goto out;
The function get_max_files() is a simple return of files_stat.max_files.
files_stat.max_files is a signed integer and is computed in
fs/file_table.c's files_init().
n = (mempages * (PAGE_SIZE / 1024)) / 10;
files_stat.max_files = n;
In our case, mempages (total_ram_pages) is approx 3,758,096,384
(0xe0000000). That leaves max_files at approximately 1,503,238,553.
This causes 2 * get_max_files() to integer overflow.
</quote>
Fix is to let /proc/sys/fs/file-nr & /proc/sys/fs/file-max use long
integers, and change af_unix to use an atomic_long_t instead of atomic_t.
get_max_files() is changed to return an unsigned long. get_nr_files() is
changed to return a long.
unix_nr_socks is changed from atomic_t to atomic_long_t, while not
strictly needed to address Robin problem.
Before patch (on a 64bit kernel) :
# echo 2147483648 >/proc/sys/fs/file-max
# cat /proc/sys/fs/file-max
-18446744071562067968
After patch:
# echo 2147483648 >/proc/sys/fs/file-max
# cat /proc/sys/fs/file-max
2147483648
# cat /proc/sys/fs/file-nr
704 0 2147483648
Reported-by: Robin Holt <holt@sgi.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: David Miller <davem@davemloft.net>
Reviewed-by: Robin Holt <holt@sgi.com>
Tested-by: Robin Holt <holt@sgi.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The lock number in /proc/locks (first field) is implemented by a counter
(private field of struct seq_file) which is incremented at each call of
locks_show() and reset to 1 in locks_start() whatever the offset is. It
should be reset according to the actual position in the list. Because of
this, the numbering erratically restarts at 1 several times when reading a
long /proc/locks file.
Moreover, locks_show() can be called twice to print a single line thus
skipping a number. The counter should be incremented in locks_next().
And last, pos is a loff_t, which can be bigger than a pointer, so we don't
use the pointer as an integer anymore, and allocate a loff_t instead.
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move the EXPORTFS kconfig symbol out of the NETWORK_FILESYSTEMS block
since it provides a library function that can be (and is) used by other
(non-network) filesystems.
This also eliminates a kconfig dependency warning:
warning: (XFS_FS && BLOCK || NFSD && NETWORK_FILESYSTEMS && INET && FILE_LOCKING && BKL) selects EXPORTFS which has unmet direct dependencies (NETWORK_FILESYSTEMS)
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alex Elder <aelder@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
bh->b_private is initialized within init_buffer(), thus this assignment is
redundant.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix up truncation (ssize_t->int). This only matters with >2G
reads/writes, which the kernel doesn't permit.
Signed-off-by: Edward Shishkin <edward@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 7909b1c640 ("fuse: don't use atomic kmap") removed KM_USER0 usage
from fuse/dev.c. Switch KM_USER1 uses to KM_USER0 for clarity. Also
replace open coded clear_highpage().
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After all that's what they are intended for.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some code cleanups for hostfs.
Signed-off-by: Richard Weinberger <richard@nod.at>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I had to go back to a 2.6.20 tree to work out why we're adding a
number-of-inodes into a number-of-pages count. Restore the lost comment.
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The dirty_ratio was silently limited in global_dirty_limits() to >= 5%.
This is not a user expected behavior. And it's inconsistent with
calc_period_shift(), which uses the plain vm_dirty_ratio value.
Let's remove the internal bound.
At the same time, fix balance_dirty_pages() to work with the
dirty_thresh=0 case. This allows applications to proceed when
dirty+writeback pages are all cleaned.
And ">" fits with the name "exceeded" better than ">=" does. Neil thinks
it is an aesthetic improvement as well as a functional one :)
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Jan Kara <jack@suse.cz>
Proposed-by: Con Kolivas <kernel@kolivas.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Neil Brown <neilb@suse.de>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michael Rubin <mrubin@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To help developers and applications gain visibility into writeback
behaviour this patch adds two counters to /proc/vmstat.
# grep nr_dirtied /proc/vmstat
nr_dirtied 3747
# grep nr_written /proc/vmstat
nr_written 3618
These entries allow user apps to understand writeback behaviour over time
and learn how it is impacting their performance. Currently there is no
way to inspect dirty and writeback speed over time. It's not possible for
nr_dirty/nr_writeback.
These entries are necessary to give visibility into writeback behaviour.
We have /proc/diskstats which lets us understand the io in the block
layer. We have blktrace for more in depth understanding. We have
e2fsprogs and debugsfs to give insight into the file systems behaviour,
but we don't offer our users the ability understand what writeback is
doing. There is no way to know how active it is over the whole system, if
it's falling behind or to quantify it's efforts. With these values
exported users can easily see how much data applications are sending
through writeback and also at what rates writeback is processing this
data. Comparing the rates of change between the two allow developers to
see when writeback is not able to keep up with incoming traffic and the
rate of dirty memory being sent to the IO back end. This allows folks to
understand their io workloads and track kernel issues. Non kernel
engineers at Google often use these counters to solve puzzling performance
problems.
Patch #4 adds a pernode vmstat file with nr_dirtied and nr_written
Patch #5 add writeback thresholds to /proc/vmstat
Currently these values are in debugfs. But they should be promoted to
/proc since they are useful for developers who are writing databases
and file servers and are not debugging the kernel.
The output is as below:
# grep threshold /proc/vmstat
nr_pages_dirty_threshold 409111
nr_pages_dirty_background_threshold 818223
This patch:
This allows code outside of the mm core to safely manipulate page
writeback state and not worry about the other accounting. Not using these
routines means that some code will lose track of the accounting and we get
bugs.
Modify nilfs2 to use interface.
Signed-off-by: Michael Rubin <mrubin@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Cc: Jiro SEKIBA <jir@unicus.jp>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This removes more dead code that was somehow missed by commit 0d99519efe
(writeback: remove unused nonblocking and congestion checks). There are
no behavior change except for the removal of two entries from one of the
ext4 tracing interface.
The nonblocking checks in ->writepages are no longer used because the
flusher now prefer to block on get_request_wait() than to skip inodes on
IO congestion. The latter will lead to more seeky IO.
The nonblocking checks in ->writepage are no longer used because it's
redundant with the WB_SYNC_NONE check.
We no long set ->nonblocking in VM page out and page migration, because
a) it's effectively redundant with WB_SYNC_NONE in current code
b) it's old semantic of "Don't get stuck on request queues" is mis-behavior:
that would skip some dirty inodes on congestion and page out others, which
is unfair in terms of LRU age.
Inspired by Christoph Hellwig. Thanks!
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: David Howells <dhowells@redhat.com>
Cc: Sage Weil <sage@newdream.net>
Cc: Steve French <sfrench@samba.org>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The locking order in oom_adjust_write() and oom_score_adj_write() for
task->alloc_lock and task->sighand->siglock is reversed, and lockdep
notices that irqs could encounter an ABBA scenario.
This fixes the locking order so that we always take task_lock(task) prior
to lock_task_sighand(task).
Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's better to use proper error handling in oom_adjust_write() and
oom_score_adj_write() instead of duplicating the locking order on various
exit paths.
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's pointless to kill a task if another thread sharing its mm cannot be
killed to allow future memory freeing. A subsequent patch will prevent
kills in such cases, but first it's necessary to have a way to flag a task
that shares memory with an OOM_DISABLE task that doesn't incur an
additional tasklist scan, which would make select_bad_process() an O(n^2)
function.
This patch adds an atomic counter to struct mm_struct that follows how
many threads attached to it have an oom_score_adj of OOM_SCORE_ADJ_MIN.
They cannot be killed by the kernel, so their memory cannot be freed in
oom conditions.
This only requires task_lock() on the task that we're operating on, it
does not require mm->mmap_sem since task_lock() pins the mm and the
operation is atomic.
[rientjes@google.com: changelog and sys_unshare() code]
[rientjes@google.com: protect oom_disable_count with task_lock in fork]
[rientjes@google.com: use old_mm for oom_disable_count in exec]
Signed-off-by: Ying Han <yinghan@google.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We use vmcore in our production kernel for a long time, it is pretty
stable now. So I don't think we need to mark it as experimental any more.
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
365b1818 ("add f_flags to struct statfs(64)") resized f_spare within
struct statfs which caused a UML crash. There is no need to copy f_spare.
Signed-off-by: Richard Weinberger <richard@nod.at>
Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Tested-by: Toralf Förster <toralf.foerster@gmx.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use kernel crypto sync hash apis insetead of cifs crypto functions.
The calls typically corrospond one to one except that insead of
key init, setkey is used.
Use crypto apis to generate smb signagtures also.
Use hmac-md5 to genereate ntlmv2 hash, ntlmv2 response, and HMAC (CR1 of
ntlmv2 auth blob.
User crypto apis to genereate signature and to verify signature.
md5 hash is used to calculate signature.
Use secondary key to calculate signature in case of ntlmssp.
For ntlmv2 within ntlmssp, during signature calculation, only 16 bytes key
(a nonce) stored within session key is used. during smb signature calculation.
For ntlm and ntlmv2 without extended security, 16 bytes key
as well as entire response (24 bytes in case of ntlm and variable length
in case of ntlmv2) is used for smb signature calculation.
For kerberos, there is no distinction between key and response.
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
* ima-memory-use-fixes:
IMA: fix the ToMToU logic
IMA: explicit IMA i_flag to remove global lock on inode_delete
IMA: drop refcnt from ima_iint_cache since it isn't needed
IMA: only allocate iint when needed
IMA: move read counter into struct inode
IMA: use i_writecount rather than a private counter
IMA: use inode->i_lock to protect read and write counters
IMA: convert internal flags from long to char
IMA: use unsigned int instead of long for counters
IMA: drop the inode opencount since it isn't needed for operation
IMA: use rbtree instead of radix tree for inode information cache
IMA currently allocated an inode integrity structure for every inode in
core. This stucture is about 120 bytes long. Most files however
(especially on a system which doesn't make use of IMA) will never need
any of this space. The problem is that if IMA is enabled we need to
know information about the number of readers and the number of writers
for every inode on the box. At the moment we collect that information
in the per inode iint structure and waste the rest of the space. This
patch moves those counters into the struct inode so we can eventually
stop allocating an IMA integrity structure except when absolutely
needed.
This patch does the minimum needed to move the location of the data.
Further cleanups, especially the location of counter updates, may still
be possible.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mark dependency on crypto modules in Kconfig.
Defining per structures sdesc and cifs_secmech which are used to store
crypto hash functions and contexts. They are stored per smb connection
and used for all auth mechs to genereate hash values and signatures.
Allocate crypto hashing functions, security descriptiors, and respective
contexts when a smb/tcp connection is established.
Release them when a tcp/smb connection is taken down.
md5 and hmac-md5 are two crypto hashing functions that are used
throught the life of an smb/tcp connection by various functions that
calcualte signagure and ntlmv2 hash, HMAC etc.
structure ntlmssp_auth is defined as per smb connection.
ntlmssp_auth holds ciphertext which is genereated by rc4/arc4 encryption of
secondary key, a nonce using ntlmv2 session key and sent in the session key
field of the type 3 message sent by the client during ntlmssp
negotiation/exchange
A key is exchanged with the server if client indicates so in flags in
type 1 messsage and server agrees in flag in type 2 message of ntlmssp
negotiation. If both client and agree, a key sent by client in
type 3 message of ntlmssp negotiation in the session key field.
The key is a ciphertext generated off of secondary key, a nonce, using
ntlmv2 hash via rc4/arc4.
Signing works for ntlmssp in this patch. The sequence number within
the server structure needs to be zero until session is established
i.e. till type 3 packet of ntlmssp exchange of a to be very first
smb session on that smb connection is sent.
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
The cifs_convert_address() returns zero on error but this caller is
testing for negative returns.
Btw. "i" is unsigned here, so it's never negative.
Reviewed-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Start calculating auth response within a session. Move/Add pertinet
data structures like session key, server challenge and ntlmv2_hash in
a session structure. We should do the calculations within a session
before copying session key and response over to server data
structures because a session setup can fail.
Only after a very first smb session succeeds, it copy/make its
session key, session key of smb connection. This key stays with
the smb connection throughout its life.
sequence_number within server is set to 0x2.
The authentication Message Authentication Key (mak) which consists
of session key followed by client response within structure session_key
is now dynamic. Every authentication type allocates the key + response
sized memory within its session structure and later either assigns or
frees it once the client response is sent and if session's session key
becomes connetion's session key.
ntlm/ntlmi authentication functions are rearranged. A function
named setup_ntlm_resp(), similar to setup_ntlmv2_resp(), replaces
function cifs_calculate_session_key().
size of CIFS_SESS_KEY_SIZE is changed to 16, to reflect the byte size
of the key it holds.
Reviewed-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Stephen Rothwell reports:
> /home/test/linux-2.6/fs/nfs/nfsroot.c: In function 'nfs_root_debug':
> /home/test/linux-2.6/fs/nfs/nfsroot.c:110:2: error: 'nfs_debug'
> undeclared (first use in this function)
> /home/test/linux-2.6/fs/nfs/nfsroot.c:110:2: note: each undeclared
> identifier is reported only once for each function it appears in
> make[3]: *** [fs/nfs/nfsroot.o] Error 1
> make[2]: *** [fs/nfs] Error 2
> make[1]: *** [fs] Error 2
> make: *** [sub-make] Error 2
Which is caused by commit 306a075362
(NFS: Allow NFSROOT debugging messages to be enabled dynamically)
Fix is to disable this code when RPC_DEBUG is disabled.
Reported-by: Zimny Lech <napohybelskurwysynom2010@gmail.com>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'for-2.6.37' of git://linux-nfs.org/~bfields/linux: (99 commits)
svcrpc: svc_tcp_sendto XPT_DEAD check is redundant
svcrpc: no need for XPT_DEAD check in svc_xprt_enqueue
svcrpc: assume svc_delete_xprt() called only once
svcrpc: never clear XPT_BUSY on dead xprt
nfsd4: fix connection allocation in sequence()
nfsd4: only require krb5 principal for NFSv4.0 callbacks
nfsd4: move minorversion to client
nfsd4: delay session removal till free_client
nfsd4: separate callback change and callback probe
nfsd4: callback program number is per-session
nfsd4: track backchannel connections
nfsd4: confirm only on succesful create_session
nfsd4: make backchannel sequence number per-session
nfsd4: use client pointer to backchannel session
nfsd4: move callback setup into session init code
nfsd4: don't cache seq_misordered replies
SUNRPC: Properly initialize sock_xprt.srcaddr in all cases
SUNRPC: Use conventional switch statement when reclassifying sockets
sunrpc/xprtrdma: clean up workqueue usage
sunrpc: Turn list_for_each-s into the ..._entry-s
...
Fix up trivial conflicts (two different deprecation notices added in
separate branches) in Documentation/feature-removal-schedule.txt
Because btrfs_dirty_inode does a btrfs_join_transaction, it doesn't actually
reserve space. It does this so we can try and dirty the inode quickly without
having to deal with the ENOSPC problems. But if it does get back ENOSPC it
handles it properly. The problem is use_block_rsv does a WARN_ON whenever this
case happens, even tho btrfs_dirty_inode takes it into account and actually
expects to get -ENOSPC if things are particularly tight. So instead just remove
the warning. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
btrfs_commit_transaction will free our trans, but because we pass trans to
shrink_delalloc we could possibly have a use after free situation. So instead
if we commit the transaction, set trans to null and set committed to true so we
don't keep trying to commit a transaction. This fixes a panic I could reproduce
at will. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
* 'nfs-for-2.6.37' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
net/sunrpc: Use static const char arrays
nfs4: fix channel attribute sanity-checks
NFSv4.1: Use more sensible names for 'initialize_mountpoint'
NFSv4.1: pnfs: filelayout: add driver's LAYOUTGET and GETDEVICEINFO infrastructure
NFSv4.1: pnfs: add LAYOUTGET and GETDEVICEINFO infrastructure
NFS: client needs to maintain list of inodes with active layouts
NFS: create and destroy inode's layout cache
NFSv4.1: pnfs: filelayout: introduce minimal file layout driver
NFSv4.1: pnfs: full mount/umount infrastructure
NFS: set layout driver
NFS: ask for layouttypes during v4 fsinfo call
NFS: change stateid to be a union
NFSv4.1: pnfsd, pnfs: protocol level pnfs constants
SUNRPC: define xdr_decode_opaque_fixed
NFSD: remove duplicate NFS4_STATEID_SIZE
The sanity checks here are incorrect; in the worst case they allow
values that crash the client.
They're also over-reliant on the preprocessor.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Pull removal of fsnotify marks into generic_shutdown_super().
Split umount-time work into a new function - evict_inodes().
Make sure that invalidate_inodes() will be able to cope with
I_FREEING once we change locking in iput().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Skip I_FREEING inodes just like I_WILL_FREE and I_NEW when walking the
writeback lists. Currenly this can't happen, but once we move from
inode_lock to more fine grained locking we can have an inode that's
still on the writeback lists but has I_FREEING set, and we absolutely
need to skip it here, just like we do for all other inode list walks.
Based on a patch from Dave Chinner.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Despite the comment above it we can not safely drop the lock here.
invalidate_list is called from many other places that just umount.
Also switch to proper list macros now that we never drop the lock.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The use of the same inode list structure (inode->i_list) for two
different list constructs with different lifecycles and purposes
makes it impossible to separate the locking of the different
operations. Therefore, to enable the separation of the locking of
the writeback and reclaim lists, split the inode->i_list into two
separate lists dedicated to their specific tracking functions.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
bdev inodes can remain dirty even after their last close. Hence the
BDI associated with the bdev->inode gets modified duringthe last
close to point to the default BDI. However, the bdev inode still
needs to be moved to the dirty lists of the new BDI, otherwise it
will corrupt the writeback list is was left on.
Add a new function bdev_inode_switch_bdi() to move all the bdi state
from the old bdi to the new one safely. This is only a temporary
measure until the bdev inode<->bdi lifecycle problems are sorted
out.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We must not call invalidate_inode_buffers in invalidate_list unless the
inode can be reclaimed. If we remove the buffer association of a busy
inode fsync won't find the buffers anymore. As invalidate_inode_buffers
is called from various others sources than umount this actually does
matter in practice.
While at it change the loop to a more natural form and remove the
WARN_ON for I_NEW, wich we already tested a few lines above.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Use dget_parent instead of opencoding it. This simplifies the code, but
more importanly prepares for the more complicated locking for a parent
dget in the dcache scale patch series.
It means we do grab a reference to the parent now if need to be watched,
but not with the specified mask. If this turns out to be a problem
we'll have to revisit it, but for now let's keep as much as possible
dcache internals inside dcache.[ch].
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Use dget_parent instead of opencoding it. This simplifies the code, but
more importanly prepares for the more complicated locking for a parent
dget in the dcache scale patch series.
Note that the d_time assignment in smb_renew_times moves out of d_lock,
but it's a single atomic 32-bit value, and that's what other sites
setting it do already.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Use dget_parent instead of opencoding it. This simplifies the code, but
more importanly prepares for the more complicated locking for a parent
dget in the dcache scale patch series.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
d_validate does a purely read lookup in the dentry hash, so use RCU read side
locking instead of dcache_lock. Split out from a larget patch by
Nick Piggin <npiggin@suse.de>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Always do a list_del_init on the LRU to make sure the list_empty invariant for
not beeing on the LRU always holds true, and fold dentry_lru_del_init into
dentry_lru_del. Replace the dentry_lru_add_tail primitive with a
dentry_lru_move_tail operations that simpler when the dentry already is one
the list, which is always is. Move the list_empty into dentry_lru_add to
fit the scheme of the other lru helpers, and simplify locking once we
move to a separate LRU lock.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Currently __shrink_dcache_sb has an extremly awkward calling convention
because it tries to please very different callers. Split out the
main loop into a shrink_dentry_list helper, which gets called directly
from shrink_dcache_sb for the cases where all dentries need to be pruned,
or from __shrink_dcache_sb for pruning only a certain number of dentries.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
dentry referenced bit is only set when installing the dentry back
onto the LRU. However with lazy LRU, the dentry can already be on
the LRU list at dput time, thus missing out on setting the referenced
bit. Fix this.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The nr_dentry stat is a globally touched cacheline and atomic operation
twice over the lifetime of a dentry. It is used for the benfit of userspace
only. Turn it into a per-cpu counter and always decrement it in d_free instead
of doing various batching operations to reduce lock hold times in the callers.
Based on an earlier patch from Nick Piggin <npiggin@suse.de>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Remove d_callback and always call __d_free with a RCU head.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
All callers take dcache_lock just around the call to __d_path, so
take the lock into it in preparation of getting rid of dcache_lock.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Instead of always assigning an increasing inode number in new_inode
move the call to assign it into those callers that actually need it.
For now callers that need it is estimated conservatively, that is
the call is added to all filesystems that do not assign an i_ino
by themselves. For a few more filesystems we can avoid assigning
any inode number given that they aren't user visible, and for others
it could be done lazily when an inode number is actually needed,
but that's left for later patches.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
new_inode() dirties a contended cache line to get increasing
inode numbers. This limits performance on workloads that cause
significant parallel inode allocation.
Solve this problem by using a per_cpu variable fed by the shared
last_ino in batches of 1024 allocations. This reduces contention on
the shared last_ino, and give same spreading ino numbers than before
(i.e. same wraparound after 2^32 allocations).
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Split up inode_add_to_list/__inode_add_to_list. Locking for the two
lists will be split soon so these helpers really don't buy us much
anymore.
The __ prefixes for the sb list helpers will go away soon, but until
inode_lock is gone we'll need them to distinguish between the locked
and unlocked variants.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Now that iunique is not abusing find_inode anymore we can move the i_ref
increment back to where it belongs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Stop abusing find_inode_fast for iunique and opencode the inode hash walk.
Introduce a new iunique_lock to protect the iunique counters once inode_lock
is removed.
Based on a patch originally from Nick Piggin.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Before replacing the inode hash locking with a more scalable
mechanism, factor the removal of the inode from the hashes rather
than open coding it in several places.
Based on a patch originally from Nick Piggin.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Convert the inode LRU to use lazy updates to reduce lock and
cacheline traffic. We avoid moving inodes around in the LRU list
during iget/iput operations so these frequent operations don't need
to access the LRUs. Instead, we defer the refcount checks to
reclaim-time and use a per-inode state flag, I_REFERENCED, to tell
reclaim that iget has touched the inode in the past. This means that
only reclaim should be touching the LRU with any frequency, hence
significantly reducing lock acquisitions and the amount contention
on LRU updates.
This also removes the inode_in_use list, which means we now only
have one list for tracking the inode LRU status. This makes it much
simpler to split out the LRU list operations under it's own lock.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The number of inodes allocated does not need to be tied to the
addition or removal of an inode to/from a list. If we are not tied
to a list lock, we could update the counters when inodes are
initialised or destroyed, but to do that we need to convert the
counters to be per-cpu (i.e. independent of a lock). This means that
we have the freedom to change the list/locking implementation
without needing to care about the counters.
Based on a patch originally from Eric Dumazet.
[AV: cleaned up a bit, fixed build breakage on weird configs
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If clone_mnt() happens while mnt_make_readonly() is running, the
cloned mount might have MNT_WRITE_HOLD flag set, which results in
mnt_want_write() spinning forever on this mount.
Needs CAP_SYS_ADMIN to trigger deliberately and unlikely to happen
accidentally. But if it does happen it can hang the machine.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Make node look as if it was on hlist, with hlist_del()
working correctly. Usable without any locking...
Convert a couple of places where we want to do that to
inode->i_hash.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In fill_super() we hadn't MS_ACTIVE set yet, so there won't
be any inodes with zero i_count sitting around.
In put_super() we already have MS_ACTIVE removed *and* we
had called invalidate_inodes() since then. So again there
won't be any inodes with zero i_count...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It's pointless - we *do* have busy inodes (root directory,
for one), so that call will fail and attempt to change
XIP flag will be ignored.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If we have the appropriate page already, call __block_write_begin()
directly instead of releasing and regrabbing it inside of
block_write_begin().
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Since inode->i_mode shares its bits for S_IFMT, S_ISDIR should be
used to distinguish whether it is a dir or not.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The aio batching code is using igrab to get an extra reference on the
inode so it can safely batch. igrab will go ahead and take the global
inode spinlock, which can be a bottleneck on large machines doing lots
of AIO.
In this case, igrab isn't required because we already have a reference
on the file handle. It is safe to just bump the i_count directly
on the inode.
Benchmarking shows this patch brings IOP/s on tons of flash up by about
2.5X.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
bh->b_private is initialized within init_buffer(), thus the
assignment should be redundant. Remove it.
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Move the EXPORTFS kconfig symbol out of the NETWORK_FILESYSTEMS block
since it provides a library function that can be (and is) used by other
(non-network) filesystems.
This also eliminates a kconfig dependency warning:
warning: (XFS_FS && BLOCK || NFSD && NETWORK_FILESYSTEMS && INET && FILE_LOCKING && BKL) selects EXPORTFS which has unmet direct dependencies (NETWORK_FILESYSTEMS)
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Alex Elder <aelder@sgi.com>
Cc: xfs-masters@oss.sgi.com
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Use sync_dirty_buffer instead of the incorrect opencoding it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Now, rw_verify_area() checsk f_pos is negative or not. And if negative,
returns -EINVAL.
But, some special files as /dev/(k)mem and /proc/<pid>/mem etc.. has
negative offsets. And we can't do any access via read/write to the
file(device).
So introduce FMODE_UNSIGNED_OFFSET to allow negative file offsets.
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
365b1818 ("add f_flags to struct statfs(64)") resized f_spare within
struct statfs which caused a UML crash. There is no need to copy f_spare.
Signed-off-by: Richard Weinberger <richard@nod.at>
Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Tested-by: Toralf Förster <toralf.foerster@gmx.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The intent was to verify that bh = affs_bread_ino(...) returned a valid
pointer. We checked "ext_bh" earlier in the function and it's valid
here.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Andrew,
Could you please review this patch, you probably are the right guy to
take it, because it crosses fs and net trees.
Note : /proc/sys/fs/file-nr is a read-only file, so this patch doesnt
depend on previous patch (sysctl: fix min/max handling in
__do_proc_doulongvec_minmax())
Thanks !
[PATCH V4] fs: allow for more than 2^31 files
Robin Holt tried to boot a 16TB system and found af_unix was overflowing
a 32bit value :
<quote>
We were seeing a failure which prevented boot. The kernel was incapable
of creating either a named pipe or unix domain socket. This comes down
to a common kernel function called unix_create1() which does:
atomic_inc(&unix_nr_socks);
if (atomic_read(&unix_nr_socks) > 2 * get_max_files())
goto out;
The function get_max_files() is a simple return of files_stat.max_files.
files_stat.max_files is a signed integer and is computed in
fs/file_table.c's files_init().
n = (mempages * (PAGE_SIZE / 1024)) / 10;
files_stat.max_files = n;
In our case, mempages (total_ram_pages) is approx 3,758,096,384
(0xe0000000). That leaves max_files at approximately 1,503,238,553.
This causes 2 * get_max_files() to integer overflow.
</quote>
Fix is to let /proc/sys/fs/file-nr & /proc/sys/fs/file-max use long
integers, and change af_unix to use an atomic_long_t instead of
atomic_t.
get_max_files() is changed to return an unsigned long.
get_nr_files() is changed to return a long.
unix_nr_socks is changed from atomic_t to atomic_long_t, while not
strictly needed to address Robin problem.
Before patch (on a 64bit kernel) :
# echo 2147483648 >/proc/sys/fs/file-max
# cat /proc/sys/fs/file-max
-18446744071562067968
After patch:
# echo 2147483648 >/proc/sys/fs/file-max
# cat /proc/sys/fs/file-max
2147483648
# cat /proc/sys/fs/file-nr
704 0 2147483648
Reported-by: Robin Holt <holt@sgi.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: David Miller <davem@davemloft.net>
Reviewed-by: Robin Holt <holt@sgi.com>
Tested-by: Robin Holt <holt@sgi.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Currently isofs_get_blocks() was limited to handle only 4TB files on 32-bit
architectures because of unnecessary use of iblock variable which was signed
long. Just remove the variable. The error messages that were using this
variable should have rather used b_off anyway because that is the block we
are currently mapping.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
__block_write_begin and block_prepare_write are identical except for slightly
different calling conventions. Convert all callers to the __block_write_begin
calling conventions and drop block_prepare_write.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Hugetlbfs used to need it, but after the destroy_inode and evict_inode
changes it's not required anymore.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add a new helper to write out the inode using the writeback code,
that is including the correct dirty bit and list manipulation. A few
of filesystems already opencode this, and a lot of others should be
using it instead of using write_inode_now which also writes out the
data.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* 'nfs-for-2.6.37' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (67 commits)
SUNRPC: Cleanup duplicate assignment in rpcauth_refreshcred
nfs: fix unchecked value
Ask for time_delta during fsinfo probe
Revalidate caches on lock
SUNRPC: After calling xprt_release(), we must restart from call_reserve
NFSv4: Fix up the 'dircount' hint in encode_readdir
NFSv4: Clean up nfs4_decode_dirent
NFSv4: nfs4_decode_dirent must clear entry->fattr->valid
NFSv4: Fix a regression in decode_getfattr
NFSv4: Fix up decode_attr_filehandle() to handle the case of empty fh pointer
NFS: Ensure we check all allocation return values in new readdir code
NFS: Readdir plus in v4
NFS: introduce generic decode_getattr function
NFS: check xdr_decode for errors
NFS: nfs_readdir_filler catch all errors
NFS: readdir with vmapped pages
NFS: remove page size checking code
NFS: decode_dirent should use an xdr_stream
SUNRPC: Add a helper function xdr_inline_peek
NFS: remove readdir plus limit
...
This was supposed to be a mutex_unlock() instead of a mutex_lock().
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Christoph Hellwig <hch@tuxera.com>
* 'for-linus' of git://git.open-osd.org/linux-open-osd:
exofs: Remove inode->i_count manipulation in exofs_new_inode
fs/exofs: typo fix of faild to failed
exofs: Set i_mapping->backing_dev_info anyway
exofs: Cleaup read path in regard with read_for_write
exofs_new_inode() was incrementing the inode->i_count and
decrementing it in create_done(), in a bad attempt to make sure
the inode will still be there when the asynchronous create_done()
finally arrives. This was very stupid because iput() was not called,
and if it was actually needed, it would leak the inode.
However all this is not needed, because at exofs_evict_inode()
we already wait for create_done() by waiting for the
object_created event. Therefore remove the superfluous ref counting
and just Thicken the comment at exofs_evict_inode() a bit.
While at it change places that open coded wait_obj_created()
to call the already available wrapper.
CC: Dave Chinner <dchinner@redhat.com>
CC: Christoph Hellwig <hch@lst.de>
CC: Nick Piggin <npiggin@kernel.dk>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Replace the BKL with a mutex to protect the venus_comm structure which
binds the mountpoint with the character device and holds the upcall
queues.
Signed-off-by: Yoshihisa Abe <yoshiabe@cs.cmu.edu>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that shared inode state is locked using the cii->c_lock, the BKL is
only used to protect the upcall queues used to communicate with the
userspace cache manager. The remaining state is all local and we can
push the lock further down into coda_upcall().
Signed-off-by: Yoshihisa Abe <yoshiabe@cs.cmu.edu>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We mostly need it to protect cached user permissions. The c_flags field
is advisory, reading the wrong value is harmless and in the worst case
we hit a slow path where we have to make an extra upcall to the
userspace cache manager when revalidating a dentry or inode.
Signed-off-by: Yoshihisa Abe <yoshiabe@cs.cmu.edu>
Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We're doing an allocation under a spinlock, and ignoring the
possibility of allocation failure.
A better fix wouldn't require an unnecessary allocation in the common
case, but we'll leave that for later.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Convert a sequence of kmalloc and memcpy to use kmemdup.
The semantic patch that performs this transformation is:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression a,flag,len;
expression arg,e1,e2;
statement S;
@@
a =
- \(kmalloc\|kzalloc\)(len,flag)
+ kmemdup(arg,len,flag)
<... when != a
if (a == NULL || ...) S
...>
- memcpy(a,arg,len+1);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
GlobalSMBSesLock is now cifs_file_list_lock. Update comments to reflect this.
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
write_behind_rc is redundant and just adds complexity to the code. What
we really want to do instead is to use mapping_set_error to reset the
flags on the mapping when we find a writeback error and can't report it
to userspace yet.
For cifs_flush and cifs_fsync, we shouldn't reset the flags since errors
returned there do get reported to userspace.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Reviewed-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
The f_op->flush operation is the last chance to return a writeback
related error when closing a file. Ensure that we don't miss reporting
any errors by waiting for writeback to complete in cifs_flush before
proceeding.
There's no reason to do this when the file isn't open for write
however.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Reviewed-by: David Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
The count for cifsFileInfo is currently an atomic, but that just adds
complexity for little value. We generally need to hold cifs_file_list_lock
to traverse the lists anyway so we might as well make this counter
non-atomic and simply use the cifs_file_list_lock to protect it.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Scanning 1024 bytes to see if an EB is empty is a bit much.
Lower it to 256 bytes and make sure the while loop is
optimized.
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Drop the alloc_sem before erasing flash in
jffs2_garbage_collect_pass().
Otherwise writes are put on hold until the erase
has finised.
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
When JFFS2 is used for large volumes, the mount times are quite long.
Increasing the hash size provides a significant speed boost on the OLPC
XO-1 laptop.
Add logic that dynamically selects a hash size based on the size of
the medium. A 64mb medium will result in a hash size of 128, and a 512mb
medium will result in a hash size of 1024.
Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
The jffs2 compression framework provides a "model" argument when
compressing and decompressing, but the caller always passes in NULL
and the callees never use it. So punt this useless overhead.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
yield() has different semantics meanwhile and even causes RT-kernels to
BUG. Replace the only appearance left in jffs2.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
The initialize_mountpoint/uninitialise_mountpoint functions are really about
setting or clearing the layout driver to be used on this filesystem. Change
the names to the more descriptive 'set_layoutdriver/clear_layoutdriver'.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Implement the driver's io_ops->alloc_lseg and free_lseg functions,
which integrate into the deviceid cache and calls out to
nfs4_proc_getdeviceinfo when necessary.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Dean Hildebrand <dhildebz@umich.edu>
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Mike Sager <sager@netapp.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Add the ability to actually send LAYOUTGET and GETDEVICEINFO. This also adds
in the machinery to handle layout state and the deviceid cache. Note that
GETDEVICEINFO is not called directly by the generic layer. Instead it
is called by the drivers while parsing the LAYOUTGET opaque data in response
to an unknown device id embedded therein. RFC 5661 only encodes
device ids within the driver-specific opaque data.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Dean Hildebrand <dhildebz@umich.edu>
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Mike Sager <sager@netapp.com>
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In particular, server reboot will invalidate all layouts.
Note that in order to have an active layout, we must get a successful response
from the server. To avoid adding that machinery, this patch just includes a
stub that fakes up a successful return. Since the layout is never referenced
for io, this is not a problem.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Dean Hildebrand <dhildebz@umich.edu>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
At the start of the io paths, try to grab the relevant layout
information. This will initiate the inode's layout cache, but
stubs ensure the cache stays empty.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Dean Hildebrand <dhildebz@umich.edu>
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This driver just registers itself and supplies trivial mount/umount functions.
Signed-off-by: Dean Hildebrand <dhildebz@umich.edu>
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Allow a module implementing a layout type to register, and
have its mount/umount routines called for filesystems that
the server declares support it.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Put in the infrastructure that uses information returned from the
server at mount to select a layout driver module.
In this patch, a stub is used that always returns "no driver found".
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Dean Hildebrand <dhildebz@umich.edu>
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This information will be used to determine which layout driver,
if any, to use for subsequent IO on this filesystem. Each driver
is assigned an integer id, with 0 reserved to indicate no driver.
The server can in theory return multiple ids. However, our current
client implementation only notes the first entry and ignores the
rest.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In NFSv4.1 the stateid consists of the other and seqid fields. For layout
processing we need to numerically compare the seqid value of layout stateids.
To do so, introduce a union to nfs4_stateid to switch between opaque(16 bytes)
and opaque(12 bytes) / __be32
Signed-off-by: Alexandros Batsakis <batsakis@netapp.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Already accepted by Bruce
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Return value of "decode_attr_bitmap()" was not checked;
Signed-off-by: Roman Borisov <ext-roman.borisov@nokia.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Used by the client to determine if the server has a granular enough
time stamp.
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Instead of blindly zapping the caches, attempt to revalidate them if
the server has indicated that it uses high resolution timestamps.
NFSv4 should be able to always revalidate the cache since the
protocol requires the update of the change attribute on modification of
the data. In reality, there are servers (the Linux NFS server
for example) that do not obey this requirement and use ctime as the
basis for change attribute. Long term, the server needs to be fixed.
At this time, and to be on the safe side, continue zapping caches if
the server indicates that it does not have a high resolution timestamp.
Signed-off-by: Ricardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This reverts commit 7681bfeecc.
Conflicts:
include/linux/genhd.h
It has numerous issues with the cleanup path and non-elevator
devices. Revert it for now so we can come up with a clean
version without rushing things.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Also ensure we only ask for either fileid or mounted_on_fileid in the
readdirplus case too...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We don't want to have the mounted_on_fileid overwrite the true fileid. We
only return the former if the server didn't supply the true fileid.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
decode_attr_filehandle still needs to skip the XDR-encoded filehandle if
someone passes a null pointer argument.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Getattr should be able to decode errors and the readdir file handle.
decode_getfattr_attrs does the actual attribute decoding, while
decode_getfattr_generic will check the opcode before decoding. This will
let other functions call decode_getfattr_attrs to decode their attributes.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Check if the decoded entry has the eof bit set when returning from xdr_decode
with an error. If it does, we should set the eof bits in the array before
returning. This should keep us from looping when we expect more data but the
server doesn't give us anything new.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Check for all errors, not a specific one.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We can use vmapped pages to read more information from the network at once.
This will reduce the number of calls needed to complete a readdir.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
[trondmy: Added #include for linux/vmalloc.h> in fs/nfs/dir.c]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Remove the page size checking code for a readdir decode. This is now done
by decode_dirent with xdr_streams.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Convert nfs*xdr.c to use an xdr stream in decode_dirent. This will prevent a
kernel oops that has been occuring when reading a vmapped page.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We will now use readdir plus even on directories that are very large.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch adds readdir plus support to the cache array.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If we're going through the loop in nfs_readdir() more than once, we usually
do not want to restart searching from the beginning of the pages cache.
We only want to do that if the previous search failed...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch adds the readdir cache array and functions to retreive the array
stored on a cache page, clear the array by freeing allocated memory, add an
entry to the array, and search the array for a given cookie.
It then modifies readdir to make use of the new cache array.
With the new cache array method, we no longer need some of this code.
Finally, nfs_llseek_dir() will set file->f_pos to a value greater than 0 and
desc->dir_cookie to zero. When we see this, readdir needs to find the file
at position file->f_pos from the start of the directory.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
nfs4state.c uses interfaces from ratelimit.h. It needs to include
that header file to fix build errors:
fs/nfs/nfs4state.c:1195: warning: type defaults to 'int' in declaration of 'DEFINE_RATELIMIT_STATE'
fs/nfs/nfs4state.c:1195: warning: parameter names (without types) in function declaration
fs/nfs/nfs4state.c:1195: error: invalid storage class for function 'DEFINE_RATELIMIT_STATE'
fs/nfs/nfs4state.c:1195: error: implicit declaration of function '__ratelimit'
fs/nfs/nfs4state.c:1195: error: '_rs' undeclared (first use in this function)
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: linux-nfs@vger.kernel.org
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If nfs_intent_set_file() returns an error, we usually want to pass that
back up the stack.
Also ensure that nfs_open_revalidate() returns '1' on success.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This reverts commit f4a3e0bceb. Jiri
Sladby points out that the tty structure we're using may already be
gone, and Al Viro doesn't hold back in complaining about the random
loading of 'filp->private_data' which doesn't have to be a pointer at
all, nor does checking the magic field for TTY_MAGIC prove anything.
Belated review by Al:
"a) global variable depending on stdin of the last opener? Affecting
output of read(2)? Really?
b) iterator is broken; list should be locked in ->start(), unlocked in
->stop() and *NOT* unlocked/relocked in ->next()
c) ->show() ought to do nothing in case of ->device == NULL, instead
of skipping those in ->next()/->start()
d) regardless of the merits of the bright idea about asterisk at that
line in output *and* regardless of (a), the implementation is not
only atrociously ugly, it's actually very likely to be a roothole.
Verifying that Cthulhu knows what number happens to be address of a
tty_struct by blindly dereferencing memory at that address...
Ouch.
Please revert that crap."
And Christoph pipes in and NAK's the approach of walking fd tables etc
too. So it's pretty unanimous.
Noticed-by: Jri Slaby <jslaby@suse.cz>
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Werner Fink <werner@suse.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: (36 commits)
nilfs2: eliminate sparse warning - "context imbalance"
nilfs2: eliminate sparse warnings - "symbol not declared"
nilfs2: get rid of bdi from nilfs object
nilfs2: change license of exported header file
nilfs2: add bdev freeze/thaw support
nilfs2: accept 64-bit checkpoint numbers in cp mount option
nilfs2: remove own inode allocator and destructor for metadata files
nilfs2: get rid of back pointer to writable sb instance
nilfs2: get rid of mi_nilfs back pointer to nilfs object
nilfs2: see state of root dentry for mount check of snapshots
nilfs2: use iget for all metadata files
nilfs2: get rid of GCDAT inode
nilfs2: add routines to redirect access to buffers of DAT file
nilfs2: add routines to roll back state of DAT file
nilfs2: add routines to save and restore bmap state
nilfs2: do not allocate nilfs_mdt_info structure to gc-inodes
nilfs2: allow nilfs_clear_inode to clear metadata file inodes
nilfs2: get rid of snapshot mount flag
nilfs2: simplify life cycle management of nilfs object
nilfs2: do not allocate multiple super block instances for a device
...
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (49 commits)
serial8250: ratelimit "too much work" error
serial: bfin_sport_uart: speed up sport RX sample rate to be 3% faster
serial: abstraction for 8250 legacy ports
serial/imx: check that the buffer is non-empty before sending it out
serial: mfd: add more baud rates support
jsm: Remove the uart port on errors
Alchemy: Add UART PM methods.
8250: allow platforms to override PM hook.
altera_uart: Don't use plain integer as NULL pointer
altera_uart: Fix missing prototype for registering an early console
altera_uart: Fixup type usage of port flags
altera_uart: Make it possible to use Altera UART and 8250 ports together
altera_uart: Add support for different address strides
altera_uart: Add support for getting mapbase and IRQ from resources
altera_uart: Add support for polling mode (IRQ-less)
serial: Factor out uart_poll_timeout() from 8250 driver
serial: mark the 8250 driver as maintained
serial: 8250: Don't delay after transmitter is ready.
tty: MAINTAINERS: add drivers/serial/jsm/ as maintained driver
vcs: invoke the vt update callback when /dev/vcs* is written to
...
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (31 commits)
driver core: Display error codes when class suspend fails
Driver core: Add section count to memory_block struct
Driver core: Add mutex for adding/removing memory blocks
Driver core: Move find_memory_block routine
hpilo: Despecificate driver from iLO generation
driver core: Convert link_mem_sections to use find_memory_block_hinted.
driver core: Introduce find_memory_block_hinted which utilizes kset_find_obj_hinted.
kobject: Introduce kset_find_obj_hinted.
driver core: fix build for CONFIG_BLOCK not enabled
driver-core: base: change to new flag variable
sysfs: only access bin file vm_ops with the active lock
sysfs: Fail bin file mmap if vma close is implemented.
FW_LOADER: fix kconfig dependency warning on HOTPLUG
uio: Statically allocate uio_class and use class .dev_attrs.
uio: Support 2^MINOR_BITS minors
uio: Cleanup irq handling.
uio: Don't clear driver data
uio: Fix lack of locking in init_uio_class
SYSFS: Allow boot time switching between deprecated and modern sysfs layout
driver core: remove CONFIG_SYSFS_DEPRECATED_V2 but keep it for block devices
...
Commit dd3932eddf ("block: remove BLKDEV_IFL_WAIT") had removed the
flag argument to blkdev_issue_flush(), but the ocfs2 merge brought in a
new one. It didn't cause a merge conflict, so the merges silently
worked out fine, but the result didn't actually compile.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: (56 commits)
[CIFS] move close processing from cifs_close to cifsFileInfo_put
cifs: convert cifs_tcp_ses_lock from a rwlock to a spinlock
cifs: cancel_delayed_work() + flush_scheduled_work() -> cancel_delayed_work_sync()
Clean up two declarations of blob_len
cifs: move cifsFileInfo_put to file.c
cifs: convert GlobalSMBSeslock from a rwlock to regular spinlock
[CIFS] Fix minor checkpatch warning and update cifs version
cifs: move cifs_new_fileinfo to file.c
cifs: eliminate pfile pointer from cifsFileInfo
cifs: cifs_write argument change and cleanup
cifs: clean up cifs_reopen_file
cifs: eliminate the inode argument from cifs_new_fileinfo
cifs: eliminate oflags option from cifs_new_fileinfo
cifs: fix flags handling in cifs_posix_open
cifs: eliminate cifs_posix_open_inode_helper
cifs: handle FindFirst failure gracefully
NTLM authentication and signing - Calculate auth response per smb session
cifs: don't use vfsmount to pin superblock for oplock breaks
cifs: keep dentry reference in cifsFileInfo instead of inode reference
cifs: on multiuser mount, set ownership to current_fsuid/current_fsgid (try #7)
...
Fix up trivial conflict in fs/cifs/cifsfs.c due to added/removed header files
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
dlm: Fix dlm lock status block comment in dlm.h
dlm: Don't send callback to node making lock request when "try 1cb" fails
* 'for-linus' of git://oss.sgi.com/xfs/xfs: (36 commits)
xfs: semaphore cleanup
xfs: Extend project quotas to support 32bit project ids
xfs: remove xfs_buf wrappers
xfs: remove xfs_cred.h
xfs: remove xfs_globals.h
xfs: remove xfs_version.h
xfs: remove xfs_refcache.h
xfs: fix the xfs_trans_committed
xfs: remove unused t_callback field in struct xfs_trans
xfs: fix bogus m_maxagi check in xfs_iget
xfs: do not use xfs_mod_incore_sb_batch for per-cpu counters
xfs: do not use xfs_mod_incore_sb for per-cpu counters
xfs: remove XFS_MOUNT_NO_PERCPU_SB
xfs: pack xfs_buf structure more tightly
xfs: convert buffer cache hash to rbtree
xfs: serialise inode reclaim within an AG
xfs: batch inode reclaim lookup
xfs: implement batched inode lookups for AG walking
xfs: split out inode walk inode grabbing
xfs: split inode AG walking into separate code for reclaim
...
insert sparse annotations to fix following sparse warning.
fs/nilfs2/segment.c:2681:3: warning: context imbalance in 'nilfs_segctor_kill_thread' - unexpected unlock
nilfs_segctor_kill_thread is only called inside sc_state_lock lock.
sparse doesn't detect the context and warn "unexpected unlock".
__acquires/__releases pretend to lock/unlock the sc_state_lock for sparse.
Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
change nilfs_dat_commit_free and nilfs_inode_cachep static
to fix following warnings
fs/nilfs2/super.c:72:19: warning: symbol 'nilfs_inode_cachep' was not declared. Should it be static?
fs/nilfs2/dat.c:106:6: warning: symbol 'nilfs_dat_commit_free' was not declared. Should it be static?
Signed-off-by: Jiro SEKIBA <jir@unicus.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Nilfs now can use sb->s_bdi to get backing_dev_info, so we use it
instead of ns_bdi on the nilfs object and remove ns_bdi.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Nilfs hasn't supported the freeze/thaw feature because it didn't work
due to the peculiar design that multiple super block instances could
be allocated for a device. This limitation was removed by the patch
"nilfs2: do not allocate multiple super block instances for a device".
So now this adds the freeze/thaw support to nilfs.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
The current implementation doesn't mount snapshots with checkpoint
numbers larger than INT_MAX since it uses match_int() for parsing
"cp=" mount option.
This uses simple_strtoull() for the conversion to resolve the issue.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This finally removes own inode allocator and destructor functions for
metadata files. Several routines, nilfs_mdt_new(),
nilfs_mdt_new_common(), nilfs_mdt_clear(), nilfs_mdt_destroy(), and
nilfs_alloc_inode_common() will be gone.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Nilfs object holds a back pointer to a writable super block instance
in nilfs->ns_writer, and this became eliminable since sb is now made
per device and all inodes have a valid pointer to it.
This deletes the ns_writer pointer and a reader/writer semaphore
protecting it.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This removes a back pointer to nilfs object from nilfs_mdt_info
structure that is attached to metadata files.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
After applied the patch that unified sb instances, root dentry of
snapshots can be left in dcache even after their trees are unmounted.
The orphan root dentry/inode keeps a root object, and this causes
false positive of nilfs_checkpoint_is_mounted function.
This resolves the issue by having nilfs_checkpoint_is_mounted test
whether the root dentry is busy or not.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This makes use of iget5_locked to allocate or get inode for metadata
files to stop using own inode allocator.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This applies prepared rollback function and redirect function of
metadata file to DAT file, and eliminates GCDAT inode.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
During garbage collection (GC), DAT file, which converts virtual block
number to real block number, may return disk block number that is not
yet written to the device.
To avoid access to unwritten blocks, the current implementation stores
changes to the caches of GCDAT during GC and atomically commit the
changes into the DAT file after they are written to the device.
This patch, instead, adds a function that makes a copy of specified
buffer and stores it in nilfs_shadow_map, and a function to get the
backup copy as needed (nilfs_mdt_freeze_buffer and
nilfs_mdt_get_frozen_buffer respectively).
Before DAT changes block number in an entry block, it makes a copy and
redirect access to the buffer so that address conversion function
(i.e. nilfs_dat_translate) refers to the old address saved in the
copy.
This patch gives requisites for such redirection.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This adds optional function to metadata files which makes a copy of
bmap, page caches, and b-tree node cache, and rolls back to the copy
as needed.
This enhancement is intended to displace gcdat inode that provides a
similar function in a different way.
In this patch, nilfs_shadow_map structure is added to store a copy of
the foregoing states. nilfs_mdt_setup_shadow_map relates this
structure to a metadata file. And, nilfs_mdt_save_to_shadow_map() and
nilfs_mdt_restore_from_shadow_map() provides save and restore
functions respectively. Finally, nilfs_mdt_clear_shadow_map() clears
states of nilfs_shadow_map.
The copy of b-tree node cache and page cache is made by duplicating
only dirty pages into corresponding caches in nilfs_shadow_map. Their
restoration is done by clearing dirty pages from original caches and
by copying dirty pages back from nilfs_shadow_map.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This adds routines to save and restore the state of bmap structure.
The bmap state is stored in a given nilfs_bmap_store object.
These routines will be used to roll back the state of dat inode
without using gcdat inode.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
GC-inode now doesn't need the nilfs_mdt_info structure and there is no
reason that it is a sort of metadata files.
This stops the allocation and makes them not dependent on metadata
file routines.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Allows clear inode function (nilfs_clear_inode) to handle metadata
files that uses bitmap-based object alloctor. DAT and ifile
correspond to this.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This stops pre-allocating nilfs object in nilfs_get_sb routine, and
stops managing its life cycle by reference counting.
nilfs_find_or_create_nilfs() function, nilfs->ns_mount_mutex,
nilfs_objects list, and the reference counter will be removed through
the simplification.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This stops allocating multiple super block instances for a device.
All snapshots and a current mode mount (i.e. latest tree) will be
controlled with nilfs_root objects that are kept within an sb
instance.
nilfs_get_sb() is rewritten so that it always has a root object for
the latest tree and snapshots make additional root objects.
The root dentry of the latest tree is binded to sb->s_root even if it
isn't attached on a directory. Root dentries of snapshots or the
latest tree are binded to mnt->mnt_root on which they are mounted.
With this patch, nilfs_find_sbinfo() function, nilfs->ns_supers list,
and nilfs->ns_current back pointer, are deleted. In addition,
init_nilfs() and load_nilfs() are simplified since they will be called
once for a device, not repeatedly called for mount points.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This splits the code to allocate root dentry into a separate routine
for convenience in successive changes.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Snapshots of nilfs are read-only.
After super block instances (sb) will be unified, nilfs will need to
check write access by a way other than implicit test with
IS_RDONLY(inode). This is because IS_RDONLY() refers to MS_RDONLY bit
of inode->i_sb->s_flags and it will become inaccurate after the
unification of sb.
To prepare for the issue, this uses i_op->permission to deny write
access to inodes in snapshots.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This rewrites nilfs_checkpoint_is_mounted() function so that it
decides whether a checkpoint is mounted by whether the corresponding
root object is found in checkpoint tree.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This rewrites functions using ifile so that they get ifile from
nilfs_root object, and will remove sbi->s_ifile. Some functions that
don't know the root object are extended to receive it from caller.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
The previous export operations cannot handle multiple versions of
a filesystem if they belong to the same sb instance.
This adds a new type of file handle and extends export operations so
that they can get the inode specified by a checkpoint number as well
as an inode number and a generation number.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This puts a pointer to nilfs_root object in the private part of
on-memory inode, and makes nilfs_iget function pick up the inode with
the same root object.
Non-root inodes inherit its nilfs_root object from parent inode. That
of the root inode is allocated through nilfs_attach_checkpoint()
function.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
To hold multiple versions of a filesystem in one sb instance, a new
on-memory structure is necessary to handle one or more checkpoints.
This adds a red-black tree of checkpoints to nilfs object, and adds
lookup and create functions for them.
Each checkpoint is represented by "nilfs_root" structure, and this
structure has rb_node to configure the rb-tree.
The nilfs_root object is identified with a checkpoint number. For
each snapshot, a nilfs_root object is allocated and the checkpoint
number of snapshot is assigned to it. For a regular mount
(i.e. current mode mount), NILFS_CPTREE_CURRENT_CNO constant is
assigned to the corresponding nilfs_root object.
Each nilfs_root object has an ifile inode and some counters. These
items will displace those of nilfs_sb_info structure in successive
patches.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This uses inode hash function that vfs provides instead of the own
hash table for caching gc inodes. This finally removes the own inode
hash from nilfs.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This separates a part of initialization code of metadata file inode,
and makes it available from the nilfs iget function that a later patch
will add to.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This uses iget5_locked instead of iget_locked so that gc cache can
look up inodes with an inode number and an optional checkpoint number.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
On-memory inode structures of nilfs have a member "i_cno" which stores
a checkpoint number related to the inode. For gc-inodes, this field
indicates version of data each gc-inode caches for GC. Log writer
temporarily uses "i_cno" to transfer the latest checkpoint number.
This stops the latter use and lets only gc-inodes use it.
The purpose of this patch is to allow the successive change use
"i_cno" for inode lookup.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This allows sop->dirty_inode callback function (nilfs_dirty_inode) to
handle metadata file inodes.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
The current nilfs_destroy_inode() doesn't handle metadata file inodes
including gc inodes (dummy inodes used for garbage collection).
This allows nilfs_destroy_inode() to destroy inodes of metadata files.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Compatibility of nilfs partitions is now managed with three feature
sets. This changes old compatibility check with revision number so
that it can accept future revisions.
Note that we can stop support of experimental versions of nilfs that
doesn't know the feature sets by incrementing NILFS_CURRENT_REV. We
don't have to do it soon, but it would be a possible option whenever
the need arises.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: remove in_workqueue_context()
workqueue: Clarify that schedule_on_each_cpu is synchronous
memory_hotplug: drop spurious calls to flush_scheduled_work()
shpchp: update workqueue usage
pciehp: update workqueue usage
isdn/eicon: don't call flush_scheduled_work() from diva_os_remove_soft_isr()
workqueue: add and use WQ_MEM_RECLAIM flag
workqueue: fix HIGHPRI handling in keep_working()
workqueue: add queue_work and activate_work trace points
workqueue: prepare for more tracepoints
workqueue: implement flush[_delayed]_work_sync()
workqueue: factor out start_flush_work()
workqueue: cleanup flush/cancel functions
workqueue: implement alloc_ordered_workqueue()
Fix up trivial conflict in fs/gfs2/main.c as per Tejun
* 'for-2.6.37/barrier' of git://git.kernel.dk/linux-2.6-block: (46 commits)
xen-blkfront: disable barrier/flush write support
Added blk-lib.c and blk-barrier.c was renamed to blk-flush.c
block: remove BLKDEV_IFL_WAIT
aic7xxx_old: removed unused 'req' variable
block: remove the BH_Eopnotsupp flag
block: remove the BLKDEV_IFL_BARRIER flag
block: remove the WRITE_BARRIER flag
swap: do not send discards as barriers
fat: do not send discards as barriers
ext4: do not send discards as barriers
jbd2: replace barriers with explicit flush / FUA usage
jbd2: Modify ASYNC_COMMIT code to not rely on queue draining on barrier
jbd: replace barriers with explicit flush / FUA usage
nilfs2: replace barriers with explicit flush / FUA usage
reiserfs: replace barriers with explicit flush / FUA usage
gfs2: replace barriers with explicit flush / FUA usage
btrfs: replace barriers with explicit flush / FUA usage
xfs: replace barriers with explicit flush / FUA usage
block: pass gfp_mask and flags to sb_issue_discard
dm: convey that all flushes are processed as empty
...
* 'for-2.6.37/core' of git://git.kernel.dk/linux-2.6-block: (39 commits)
cfq-iosched: Fix a gcc 4.5 warning and put some comments
block: Turn bvec_k{un,}map_irq() into static inline functions
block: fix accounting bug on cross partition merges
block: Make the integrity mapped property a bio flag
block: Fix double free in blk_integrity_unregister
block: Ensure physical block size is unsigned int
blkio-throttle: Fix possible multiplication overflow in iops calculations
blkio-throttle: limit max iops value to UINT_MAX
blkio-throttle: There is no need to convert jiffies to milli seconds
blkio-throttle: Fix link failure failure on i386
blkio: Recalculate the throttled bio dispatch time upon throttle limit change
blkio: Add root group to td->tg_list
blkio: deletion of a cgroup was causes oops
blkio: Do not export throttle files if CONFIG_BLK_DEV_THROTTLING=n
block: set the bounce_pfn to the actual DMA limit rather than to max memory
block: revert bad fix for memory hotplug causing bounces
Fix compile error in blk-exec.c for !CONFIG_DETECT_HUNG_TASK
block: set the bounce_pfn to the actual DMA limit rather than to max memory
block: Prevent hang_check firing during long I/O
cfq: improve fsync performance for small files
...
Fix up trivial conflicts due to __rcu sparse annotation in include/linux/genhd.h
* 'linux-next' of git://git.infradead.org/ubifs-2.6:
UBIFS: do not allocate unneeded scan buffer
UBIFS: do not forget to cancel timers
UBIFS: remove a bit of unneeded code
UBIFS: add a commentary about log recovery
UBIFS: avoid kernel error if ubifs superblock read fails
UBIFS: introduce new flags for RO mounts
UBIFS: introduce new flag for RO due to errors
UBIFS: check return code of pnode_lookup
UBIFS: check return code of ubifs_lpt_lookup
UBIFS: improve error reporting when reading bad node
UBIFS: introduce list sorting debugging checks
UBIFS: fix assertion warnings in comparison function
UBIFS: mark unused key objects as invalid
UBIFS: do not write rubbish into truncation scanning node
UBIFS: improve assertion in node comparison functions
UBIFS: do not use key type in list_sort
UBIFS: do not look up truncation nodes
UBIFS: fix assertion warning
UBIFS: do not treat ENOSPC specially
UBIFS: switch to RO mode after synchronizing
If we failed to find the root subvol id, or the subvol=<name>, we would
deactivate the locked super and close the devices. The problem is at this point
we have gotten the SB all setup, which includes setting super_operations, so
when we'd deactiveate the super, we'd do a close_ctree() which closes the
devices, so we'd end up closing the devices twice. So if you do something like
this
mount /dev/sda1 /mnt/test1
mount /dev/sda1 /mnt/test2 -o subvol=xxx
umount /mnt/test1
it would blow up (if subvol xxx doesn't exist). This patch fixes that problem.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
With multi-threaded writes we were getting ENOSPC early because somebody would
come in, start flushing delalloc because they couldn't make their reservation,
and in the meantime other threads would come in and use the space that was
getting freed up, so when the original thread went to check to see if they had
space they didn't and they'd return ENOSPC. So instead if we have some free
space but not enough for our reservation, take the reservation and then start
doing the flushing. The only time we don't take reservations is when we've
already overcommitted our space, that way we don't have people who come late to
the party way overcommitting ourselves. This also moves all of the retrying and
flushing code into reserve_metdata_bytes so it's all uniform. This keeps my
fs_mark test from returning -ENOSPC as soon as it starts and actually lets me
fill up the disk. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Because the ENOSPC code over reserves super aggressively we end up allocating
chunks way more often than we should. For example with my fs_mark tests on a
2gb fs I can end up reserved 1gb just for metadata, when only 34mb of that is
being used. So instead check to see if the amount of space actually used is
less than 30% of the total space, and if so don't allocate a chunk, but only if
we have at least 256mb of free space to make sure we don't put too much pressure
on free space.
Signed-off-by: Josef Bacik <josef@redhat.com>
Currently we try and flush delalloc, but we only do that in a sort of weak way,
which works fine in most cases but if we're under heavy pressure we need to be
able to wait for flushing to happen. Also instead of checking the bytes
reserved in the block_rsv, check the space info since it is more accurate. The
sync option will be used in a future patch.
Signed-off-by: Josef Bacik <josef@redhat.com>
Venkateswararao Jujjuri (JV)
Aneesh Kumar K.V
Harsh Prateek Bora
Sripathi Kodi
Dan Carpenter
Linus Torvalds
Sage Weil
Theodore Ts'o
Dmitry Monakhov
Nicolas Kaiser
Kazuya Mio
Eric Sandeen
Lukas Czerner
Namhyung Kim
Toshiyuki Okajima
Maciej Żenczykowski
Sergey Senozhatsky
Curt Wohlgemuth
Brian King
Shawn Bohrer
Andrew Morton
Miklos Szeredi
KOSAKI Motohiro
KAMEZAWA Hiroyuki
Davidlohr Bueso
Nikanth Karthikesan
Roland McGrath
Xiaotian Feng
Ondrej Zary
Jan Kara
Andrea Gelmini
Darrick J. Wong
Arnd Bergmann
J. Bruce Fields
Christoph Hellwig
Shirish Pargaonkar
Peter Zijlstra
Eric Dumazet
Jerome Marchand
Randy Dunlap
Edward Shishkin
Jan Beulich
Richard Weinberger
Wu Fengguang
Michael Rubin
David Rientjes
Ying Han
WANG Cong
Eric Paris
Trond Myklebust
Josef Bacik
Al Viro
Christoph Hellwig
Nick Piggin
Dave Chinner
Christoph Hellwig
Chris Mason
Boaz Harrosh
Joe Perches
Yoshihisa Abe
Julia Lawall
Suresh Jayaraman
Jeff Layton
Steve French
Joakim Tjernlund
Daniel Drake
Mike Frysinger
Wolfram Sang
Andy Adamson
Benny Halevy
Dean Hildebrand
Fred Isaman
Ricardo Labiaga
Alexandros Batsakis
Roman Borisov
Jens Axboe
Bryan Schumaker
Jiro SEKIBA
Ryusuke Konishi