Граф коммитов

30 Коммитов

Автор SHA1 Сообщение Дата
Cristian Ciocaltea db01868f1b clk: actions: Add NIC and ETHERNET clock support for Actions S500 SoC
Add support for the missing NIC and ETHERNET clocks in the Actions Semi
Owl S500 SoC clock driver.

Additionally, change APB clock parent from AHB to the newly added NIC.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/d62e4f1f85c5cef05be14d9e8143e88bbddd2e0f.1623354574.git.cristian.ciocaltea@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-27 18:45:17 -07:00
Cristian Ciocaltea fd90b5b904 clk: actions: Fix AHPPREDIV-H-AHB clock chain on Owl S500 SoC
There are a few issues with the setup of the Actions Semi Owl S500 SoC's
clock chain involving AHPPREDIV, H and AHB clocks:

* AHBPREDIV clock is defined as a muxer only, although it also acts as
  a divider.
* H clock is using a wrong divider register offset
* AHB is defined as a multi-rate factor clock, but it is actually just
  a fixed pass clock.

Let's provide the following fixes:

* Change AHBPREDIV clock to an ungated OWL_COMP_DIV definition.
* Use the correct register shift value in the OWL_DIVIDER definition
  for H clock
* Drop the unneeded 'ahb_factor_table[]' and change AHB clock to an
  ungated OWL_COMP_FIXED_FACTOR definition.

Fixes: ed6b4795ec ("clk: actions: Add clock driver for S500 SoC")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Link: https://lore.kernel.org/r/21c1abd19a7089b65a34852ac6513961be88cbe1.1623354574.git.cristian.ciocaltea@gmail.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-27 18:45:16 -07:00
Cristian Ciocaltea a8f1f03caa clk: actions: Fix bisp_factor_table based clocks on Owl S500 SoC
The following clocks of the Actions Semi Owl S500 SoC have been defined
to use a shared clock factor table 'bisp_factor_table[]': DE[1-2], VCE,
VDE, BISP, SENSOR[0-1]

There are several issues involved in this approach:

* 'bisp_factor_table[]' describes the configuration of a regular 8-rates
  divider, so its usage is redundant. Additionally, judging by the BISP
  clock context, it is incomplete since it maps only 8 out of 12
  possible entries.

* The clocks mentioned above are not identical in terms of the available
  rates, therefore cannot rely on the same factor table. Specifically,
  BISP and SENSOR* are standard 12-rate dividers so their configuration
  should rely on a proper clock div table, while VCE and VDE require a
  factor table that is a actually a subset of the one needed for DE[1-2]
  clocks.

Let's fix this by implementing the following:

* Add new factor tables 'de_factor_table' and 'hde_factor_table' to
  properly handle DE[1-2], VCE and VDE clocks.

* Add a common div table 'std12rate_div_table' for BISP and SENSOR[0-1]
  clocks converted to OWL_COMP_DIV.

* Drop the now unused 'bisp_factor_table[]'.

Additionally, drop the CLK_IGNORE_UNUSED flag for SENSOR[0-1] since
there is no reason to always keep ON those clocks.

Fixes: ed6b4795ec ("clk: actions: Add clock driver for S500 SoC")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/e675820a46cd9930d8d576c6cae61d41c1a8416f.1623354574.git.cristian.ciocaltea@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-27 18:45:16 -07:00
Cristian Ciocaltea fe1f71e338 clk: actions: Fix SD clocks factor table on Owl S500 SoC
Drop the unsupported entries in the factor table used for the SD[0-2]
clocks definitions on the Actions Semi Owl S500 SoC.

Fixes: ed6b4795ec ("clk: actions: Add clock driver for S500 SoC")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/196c948d708a22b8198c95f064a0f6b6820f9980.1623354574.git.cristian.ciocaltea@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-27 18:45:16 -07:00
Cristian Ciocaltea 2dca2a619a clk: actions: Fix UART clock dividers on Owl S500 SoC
Use correct divider registers for the Actions Semi Owl S500 SoC's UART
clocks.

Fixes: ed6b4795ec ("clk: actions: Add clock driver for S500 SoC")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/4714d05982b19ac5fec2ed74f54be42d8238e392.1623354574.git.cristian.ciocaltea@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-27 18:45:16 -07:00
Cristian Ciocaltea 9fb961da91 clk: actions: Add Actions S500 SoC Reset Management Unit support
Add Reset Management Unit (RMU) support for Actions Semi S500 SoC.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/3fba2e6f0edfac97cb8c6ce60f95c24852578eac.1593788312.git.cristian.ciocaltea@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-21 01:50:47 -07:00
Cristian Ciocaltea b81e88dead clk: actions: Add APB, DMAC, GPIO clock support for Actions S500 SoC
Add support for the missing APB, DMAC and GPIO clocks in the Actions
Semi S500 SoC clock driver.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Link: https://lore.kernel.org/r/87964ae012e513597b8b4c7be2e7ac332a70087a.1593788312.git.cristian.ciocaltea@gmail.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-21 01:50:46 -07:00
Cristian Ciocaltea f47ee279d2 clk: actions: Fix h_clk for Actions S500 SoC
The h_clk clock in the Actions Semi S500 SoC clock driver has an
invalid parent. Replace with the correct one.

Fixes: ed6b4795ec ("clk: actions: Add clock driver for S500 SoC")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/c57e7ebabfa970014f073b92fe95b47d3e5a70b1.1593788312.git.cristian.ciocaltea@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-21 01:50:46 -07:00
Stephen Boyd b6c444de05 Merge branches 'clk-cdce-regulator', 'clk-bcm', 'clk-evict-parent-cache' and 'clk-actions' into clk-next
- Add regulator support to the cdce925 clk driver
 - Add support for Raspberry Pi 4 bcm2711 SoCs
 - Evict parents from parent cache when they're unregistered

* clk-cdce-regulator:
  clk: clk-cdce925: Add regulator support
  dt-bindings: clock: cdce925: Add regulator documentation

* clk-bcm:
  clk: bcm2835: Mark PLLD_PER as CRITICAL
  clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support
  clk: bcm2835: Introduce SoC specific clock registration
  dt-bindings: bcm2835-cprman: Add bcm2711 support

* clk-evict-parent-cache:
  clk: Evict unregistered clks from parent caches

* clk-actions:
  clk: actions: Fix factor clk struct member access
2019-09-19 15:31:46 -07:00
Manivannan Sadhasivam ed309bfb48 clk: actions: Fix factor clk struct member access
Since the helper "owl_factor_helper_round_rate" is shared between factor
and composite clocks, using the factor clk specific helper function
like "hw_to_owl_factor" to access its members will create issues when
called from composite clk specific code. Hence, pass the "factor_hw"
struct pointer directly instead of fetching it using factor clk specific
helpers.

This issue has been observed when a composite clock like "sd0_clk" tried
to call "owl_factor_helper_round_rate" resulting in pointer dereferencing
error.

While we are at it, let's rename the "clk_val_best" function to
"owl_clk_val_best" since this is an owl SoCs specific helper.

Fixes: 4bb78fc974 ("clk: actions: Add factor clock support")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190916154546.24982-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17 12:54:44 -07:00
Stephen Boyd cf9ec1fc6d clk: actions: Don't reference clk_init_data after registration
A future patch is going to change semantics of clk_register() so that
clk_hw::init is guaranteed to be NULL after a clk is registered. Avoid
referencing this member here so that we don't run into NULL pointer
exceptions.

Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190731193517.237136-2-sboyd@kernel.org
[sboyd@kernel.org: Move name to after checking for error or NULL hw]
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-08-16 10:19:49 -07:00
Thomas Gleixner ec8f24b7fa treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:46 +02:00
Nishad Kamdar ddd3e8b976 clk: actions: Use the correct style for SPDX License Identifier
This patch corrects the SPDX License Identifier style
in header files related to Clock Drivers for Actions Semi Socs.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)

Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-01 13:01:07 -07:00
Manivannan Sadhasivam ed6b4795ec clk: actions: Add clock driver for S500 SoC
Add common clock driver for Actions Semi S500 SoC.

Signed-off-by: Edgar Bernardi Righi <edgar.righi@lsitec.org.br>
[Mani: cleaned up the driver]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-22 00:01:08 -08:00
Manivannan Sadhasivam 9831289f6f clk: actions: Add configurable PLL delay
S500 SoC requires configurable delay for different PLLs. Hence, add
a separate macro for declaring a PLL with configurable delay and also
modify the existing OWL_PLL_NO_PARENT macro to use default delay so
that no need to modify the existing S700/S900 drivers.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21 23:58:12 -08:00
Manivannan Sadhasivam 5ddf0cdf93 clk: actions: Add Actions Semi S900 SoC Reset Management Unit support
Add Reset Management Unit (RMU) support for Actions Semi S900 SoC.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16 14:41:53 -07:00
Manivannan Sadhasivam c4dd4a2eb6 clk: actions: Add Actions Semi S700 SoC Reset Management Unit support
Add Reset Management Unit (RMU) support for Actions Semi S700 SoC.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16 14:41:47 -07:00
Manivannan Sadhasivam 09dbde0154 clk: actions: Add Actions Semi Owl SoCs Reset Management Unit support
Add Reset Management Unit (RMU) support for Actions Semi Owl SoCs.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16 14:41:39 -07:00
Manivannan Sadhasivam 3a23eb725b clk: actions: Cache regmap info in private clock descriptor
In order to support the reset controller, regmap info needs to
be cached in the private clock descriptor, owl_clk_desc. Hence,
save that and also make the clock descriptor struct non const.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-16 14:40:54 -07:00
Saravanan Sekar d47317ca4a clk: actions: Add S700 SoC clock support
Add Actions Semi S700 SoC clock support

Signed-off-by: Parthiban Nallathambi <pn@denx.de>
Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-07-25 16:40:54 -07:00
Saravanan Sekar d017c1f16a clk: actions: Add missing REGMAP_MMIO dependency
Add REGMAP_MMIO as dependency to avoid undefined
reference to regmap symbols.

Fixes: d85d20053e ("clk: actions: Add S900 SoC clock support")
Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-07-25 16:40:52 -07:00
Manivannan Sadhasivam d85d20053e clk: actions: Add S900 SoC clock support
Add Actions Semi S900 SoC clock support.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06 14:26:48 -07:00
Manivannan Sadhasivam 2792c37e94 clk: actions: Add pll clock support
Add support for Actions Semi PLL clock.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06 14:25:52 -07:00
Manivannan Sadhasivam bb150645ab clk: actions: Add composite clock support
Add support for Actions Semi composite clock. This clock
consists of gate, mux, divider, factor and fixed factor clocks.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06 14:25:18 -07:00
Manivannan Sadhasivam c535196446 clk: actions: Add fixed factor clock support
Add support for Actions Semi fixed factor clock reusing the clk
ops from common clock driver.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06 14:25:08 -07:00
Manivannan Sadhasivam 4bb78fc974 clk: actions: Add factor clock support
Add support for Actions Semi factor clock together with
helper functions to be used in composite clock.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06 14:24:40 -07:00
Manivannan Sadhasivam e10e291833 clk: actions: Add divider clock support
Add support for Actions Semi divider clock together with
helper functions to be used in composite clock.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06 14:18:17 -07:00
Manivannan Sadhasivam a83387729a clk: actions: Add mux clock support
Add support for Actions Semi mux clock together with helper
functions to be used in composite clock.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06 14:17:46 -07:00
Manivannan Sadhasivam 103c5e1b10 clk: actions: Add gate clock support
Add support for Actions Semi gate clock together with helper
functions to be used in composite clock.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06 14:16:38 -07:00
Manivannan Sadhasivam 3495e29565 clk: actions: Add common clock driver support
Add support for Actions Semi common clock driver with generic structures
and interface functions.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-06 14:15:23 -07:00