drm_get_minor() is only used in one file. Make it static and add a
kernel-doc comment which documents the current semantics.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Allow passing NULL as minor to simplify DRM destruction paths. Also remove
the double-pointer reset as it is no longer needed. drm_put_minor() is
only called when the underlying object is destroyed. Hence, resetting
minors to NULL is not necessary.
As drm_put_minor() is no longer used by other DRM files, we can make it
static, too.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Replace the sparse array of booleans with a bitfield.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When a second process opens the device and master transferrence is
complete, we walk the list of open devices and remove their
authentication. This also revokes our root privilege. Instead of simply
dropping the authentication, this patch reverts the authenticated state
back to its original value.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
New helper function to set the preferred video mode. Can be called
after drm_add_modes_noedid if you don't want the largest supported
video mode be used by default.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Those structures are not used anywhere.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Those functions are just reading data from those pointers.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
A change in locking of some kms drivers (currently intel-kms) make
the old approach too inaccurate and also incompatible with the
PREEMPT_RT realtime kernel patchset.
The driver->get_scanout_position() method of intel-kms now needs
to aquire a spinlock, which clashes badly with the former
preempt_disable() calls in the drm, and it also introduces larger
delays and timing uncertainty on a contended lock than acceptable.
This patch changes the prototype of driver->get_scanout_position()
to require/allow kms drivers to perform the ktime_get() system time
queries which go along with actual scanout position readout in a way
that provides maximum precision and to return those timestamps to
the drm. kms drivers implementations of get_scanout_position() are
asked to implement timestamping and scanoutpos readout in a way
that is as precise as possible and compatible with preempt_disable()
on a PREMPT_RT kernel. A driver should follow this pattern in
get_scanout_position() for precision and compatibility:
spin_lock...(...);
preempt_disable_rt(); // On a PREEMPT_RT kernel, otherwise omit.
if (stime) *stime = ktime_get();
... Minimum amount of MMIO register reads to get scanout position ...
... no taking of locks allowed here! ...
if (etime) *etime = ktime_get();
preempt_enable_rt(); // On PREEMPT_RT kernel, otherwise omit.
spin_unlock...(...);
v2: Fix formatting of new multi-line code comments.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The biggest part of the changes is the decoupling of the host1x and DRM
drivers followed by the move of Tegra DRM back to drivers/gpu/drm/tegra
from whence it came. There is a lot of cleanup as well, and the drivers
can now be properly unloaded and reloaded.
HDMI support for the Tegra114 SoC was contributed by Mikko Perttunen.
gr2d support was extended to Tegra114 and the gr3d driver that has been
in the works for quite some time finally made it in. All pieces to run
an OpenGL driver on top of an upstream kernel are now available.
Support for syncpoint bases was added by Arto Merilainen. This is useful
for synchronizing between command streams from different engines such as
gr2d and gr3d.
Erik Faye-Lund and Wei Yongjun contributed various small fixes. Thanks!
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=qc03
-----END PGP SIGNATURE-----
Merge tag 'drm/for-3.13-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v3.13-rc1
The biggest part of the changes is the decoupling of the host1x and DRM
drivers followed by the move of Tegra DRM back to drivers/gpu/drm/tegra
from whence it came. There is a lot of cleanup as well, and the drivers
can now be properly unloaded and reloaded.
HDMI support for the Tegra114 SoC was contributed by Mikko Perttunen.
gr2d support was extended to Tegra114 and the gr3d driver that has been
in the works for quite some time finally made it in. All pieces to run
an OpenGL driver on top of an upstream kernel are now available.
Support for syncpoint bases was added by Arto Merilainen. This is useful
for synchronizing between command streams from different engines such as
gr2d and gr3d.
Erik Faye-Lund and Wei Yongjun contributed various small fixes. Thanks!
* tag 'drm/for-3.13-rc1' of git://anongit.freedesktop.org/tegra/linux: (45 commits)
drm/tegra: Reserve syncpoint base for gr3d
drm/tegra: Reserve base for gr2d
drm/tegra: Deliver syncpoint base to user space
gpu: host1x: Add syncpoint base support
gpu: host1x: Add 'flags' field to syncpt request
drm/tegra: Disable clock on probe failure
gpu: host1x: Disable clock on probe failure
drm/tegra: Support bottom-up buffer objects
drm/tegra: Add support for tiled buffer objects
drm/tegra: Add 3D support
drm/tegra: Introduce tegra_drm_submit()
drm/tegra: Use symbolic names for gr2d registers
drm/tegra: Start connectors with correct DPMS mode
drm/tegra: hdmi: Enable VDD earlier for hotplug/DDC
drm/tegra: hdmi: Fix build warnings
drm/tegra: hdmi: Detect DVI-only displays
drm/tegra: Add Tegra114 HDMI support
drm/tegra: hdmi: Parameterize based on compatible property
drm/tegra: hdmi: Rename tegra{2,3} to tegra{20,30}
gpu: host1x: Add support for Tegra114
...
The Tegra DRM driver currently uses some infrastructure to defer the DRM
core initialization until all required devices have registered. The same
infrastructure can potentially be used by any other driver that requires
more than a single sub-device of the host1x module.
Make the infrastructure more generic and keep only the DRM specific code
in the DRM part of the driver. Eventually this will make it easy to move
the DRM driver part back to the DRM subsystem.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The caller may want to know whether the configuration was changed, and
if an hotplug event was sent.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds support for the Armada 510 display subsystem found on the
Marvell Dove devices. This IP is re-used across several different Marvell
SoCs with various tweaks, and this driver has been structured to allow
the other IPs to re-use the bulk of this code; further work in this area
is expected from interested parties.
This has been extensively tested on the SolidRun Cubox platform and
appears to work well there.
[airlied: update for api changes merged previous to this]
So drm was abusing device lifetimes, by having embedded device structures
in the minor and connector it meant that the lifetime of the internal drm
objects (drm_minor and drm_connector) were tied to the lifetime of the device
files in sysfs, so if something kept those files opened the current code
would kfree the objects and things would go downhill from there.
Now in reality there is no need for these lifetimes to be so intertwined,
especailly with hotplugging of devices where we wish to remove the sysfs
and userspace facing pieces before we can unwind the internal objects due
to open userspace files or mmaps, so split the objects out so the struct
device is no longer embedded and do what fbdev does and just allocate
and remove the sysfs inodes separately.
Signed-off-by: Dave Airlie <airlied@redhat.com>
This patch adds support for the pair of LCD controllers on the Marvell
Armada 510 SoCs. This driver supports:
- multiple contiguous scanout buffers for video and graphics
- shm backed cacheable buffer objects for X pixmaps for Vivante GPU
acceleration
- dual lcd0 and lcd1 crt operation
- video overlay on each LCD crt via DRM planes
- page flipping of the main scanout buffers
- DRM prime for buffer export/import
This driver is trivial to extend to other Armada SoCs.
Included in this commit is the core driver with no output support; output
support is platform and encoder driver dependent.
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The conflict in intel_drv.h tripped me up a bit since a patch in dinq
moves all the functions around, but another one in drm-next removes a
single function. So I'ev figured backing this into a backmerge would
be good.
i915_dma.c is just adjacent lines changed, nothing nefarious there.
Conflicts:
drivers/gpu/drm/i915/i915_dma.c
drivers/gpu/drm/i915/intel_drv.h
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The user of these counters was killed in
commit d79cdc8312
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Aug 8 15:41:32 2013 +0200
drm: no-op out GET_STATS ioctl
so clean up the leftovers as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We can get the PCI vendor and device IDs via dev->pdev. So we can drop
the duplicated information.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The only user of ctx_count is the via driver, and we can replace that
use with list_is_singular().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
'map_count' and 'work' are never used. Kill them both.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
irq_enabled is only ever 0 or 1, so make it a bool.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
drm_vblank_init() is too ugly. Make it a bit easier on the eye by
collecting all the per-crtc vblank counters, timestamps etc. to
a structure and just allocate an array of those.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
vblank_enabled is only ever 0 or 1, so make it a bool.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
vblank_inmodeset is a bitmask, with only two bits mind you, but better
make it unsigned anyway.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
vblank_disable_allowed is only ever 0 or 1, so make it a bool.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Analog to drm_dev_register(), we now provide drm_dev_unregister() which
does the reverse. drm_dev_put() is still in place and combines the calls
to drm_dev_unregister() and drm_dev_free() so buses don't have to change.
*_get() and *_put() are used for reference-counting in the kernel.
However, drm_dev_put() definitely does not do any kind of ref-counting.
Hence, use the more appropriate *_register(), *_unregister(), *_alloc()
and *_free() names.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The error paths in DRM bus drivers currently leak memory as they don't
correctly revert drm_dev_alloc(). Introduce drm_dev_free() to free DRM
devices which haven't been registered, yet.
We must be careful not to introduce any side-effects with cleanups done in
drm_dev_free(). drm_ht_remove(), drm_ctxbitmap_cleanup() and
drm_gem_destroy() are all fine in that regard.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
All bus drivers do device setup themselves. This requires us to adjust all
of them if we introduce new core features. Thus, merge all these into a
uniform drm_dev_register() helper.
Note that this removes the drm_lastclose() error path for AGP as it is
horribly broken. Moreover, no bus driver called this in any other error
path either. Instead, we use the recently introduced AGP cleanup helpers.
We also keep a DRIVER_MODESET condition around pci_set_drvdata() to keep
semantics.
[airlied: keep passing flags through so drivers don't oops on load]
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Instead of managing device allocation+initialization in each bus-driver,
we should do that in a central place. drm_fill_in_dev() already does most
of it, but also requires the global drm lock for partial AGP device
registration.
Split both apart so we have a clean device initialization/allocation
phase, and a registration phase.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
All drivers embed gem-objects into their own buffer objects. There is no
reason to keep drm_gem_object_alloc(), gem->driver_private and
->gem_init_object() anymore.
New drivers are highly encouraged to do the same. There is no benefit in
allocating gem-objects separately.
Cc: Dave Airlie <airlied@gmail.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Ben Skeggs <skeggsb@gmail.com>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The kernel shouldn't accept invalid modes, just say No.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This allows us to use fewer bits in the mode structure, leaving room for
future work while allowing more stereo layouts types than we could have
ever dreamt of.
I also exposed the previously private DRM_MODE_FLAG_3D_MASK to set in
stone that we are using 5 bits for the stereo layout enum, reserving 32
values.
Even with that reservation, we gain 3 bits from the previous encoding.
The code adding the mandatory stereo modes needeed to be adapted as it was
relying or being able to or stereo layouts together.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When using the frame packing and a single big framebuffer, some hardware
requires that we do everything like if we were scanning out the big
buffer itself. Let's instrument drm_mode_set_crtcinfo() to be able to do
this adjustement if the driver is asking for it.
v2: Use crtc_vtotal and multiply the clock by 2 instead of
reconstructing it (Ville Syrjälä)
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Just like the various timings, make it possible to have a clock field
what we can tweak before giving it to hardware.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This field is unused. Garbage collect it.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This field was only accessed by the nouveau driver, but never set. So
concluded we can rid of this one.
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Just like with interlaced or double scan modes, make stereo modes a
per-connector opt-in to give a chance to driver authors to make it work
before enabling it.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When scanning out a stereo mode, the AVI infoframe vic field has to be
the underlyng 2D VIC. Before that commit, we weren't matching the CEA
mode because of the extra stereo flag and then were setting the VIC
field in the AVI infoframe to 0.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This capability allows user space to control the delivery of modes with
the 3D flags set. This is to not play games with current user space
users not knowing anything about stereo 3D flags and that could try
to set a mode with one or several of those bits set.
So, the plan is to remove the stereo modes from the list of modes we
give to DRM clients by default, and let them through if we are being
told otherwise.
stereo_allowed is bound to the drm_file structure to make it a
per-client setting, not a global one.
v2: Replace clearing 3D flags by discarding the stereo modes now that
they are regular modes.
v3: SET_CAP -> SET_CLIENT_CAP rename (Chris Wilson)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
HDMI 1.4a defines a few layouts that we'd like to expose. This commits
add new modeinfo flags that can be used to list the supported stereo
layouts (when querying the list of modes) and to set a given stereo 3D
mode (when setting a mode).
v2: Add a drm_mode_is_stereo() helper
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This ioctl can be used to turn some knobs in a DRM driver. The client
can ask the DRM core for an alternate view of the reality: it can be
useful to be able to instruct the core that the DRM client can handle
new functionnality that would otherwise break current ABI.
v2: Rename to ioctl from SET_CAP to SET_CLIENT_CAP (Chris Wilson)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
None of the DP DPCD helpers need to modify the DPCD.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We have some code duplication related to EDID duplication. Add a helper.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Detailed cap info at address 80h is not available with DPCD ver
1.0. Whether such devices exist in the wild I don't know, but there
should be no harm done in having the defines for downstream port 0 in
address 05h.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Todd Previte <tprevite@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This reverts commit 7c510133d9.
Well looks like not enough digging was done, libdrm_nouveau before 2.4.33
used contexts,
292da616fe1f936ca78a3fa8e1b1b19883e343b6 nouveau: pull in major libdrm rewrite
got rid of them,
Reported-by: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
Reported-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Dave Airlie <airlied@redhat.com>
- Early stolen mem reservation from Jesse in x86 boot code. Acked by Ingo
and hpa. This was ready much earlier but somehow I've thought it'd go
in through x86 trees, hence why this is late. Avoids the pci resource
code to plant mmiobars in the middle of stolen mem and other ugliness.
- vgaarb improvements from Alex Williamson plus the fix from Ville for the
vgacon->fbcon smooth transition "feature".
- Render pageflips on ivb/hsw to avoid stalls due to the ring switching
when only flipping on the blitter (Chris).
- Deadlock fixes around our flush_workqueue which crept back in - lockdep
isn't clever enough :(
- Shrinker recursion fix from Chris - this is the thing that blew the vma
patches from Ben I've taken out of 3.12.
- Fixup for the relocation refactoring. Also an igt testcase to make sure
we don't break this again.
- Pile of smaller fixups all over, shortlog has full details.
* tag 'drm-intel-fixes-2013-09-06' of git://people.freedesktop.org/~danvet/drm-intel: (29 commits)
drm/i915: Delay disabling of VGA memory until vgacon->fbcon handoff is done
drm/i915: try not to lose backlight CBLV precision
drm/i915: Confine page flips to BCS on Valleyview
drm/i915: Skip stolen region initialisation if none is reserved
drm/i915: fix gpu hang vs. flip stall deadlocks
drm/i915: Hold an object reference whilst we shrink it
drm/i915: fix i9xx_crtc_clock_get for multiplied pixels
drm/i915: handle sdvo input pixel multiplier correctly again
drm/i915: fix hpd work vs. flush_work in the pageflip code deadlock
drm/i915: fix up the relocate_entry refactoring
drm/i915: Fix pipe config warnings when dealing with LVDS fixed mode
drm/i915: Don't call sg_free_table() if sg_alloc_table() fails
i915: Update VGA arbiter support for newer devices
vgaarb: Fix VGA decodes changes
vgaarb: Don't disable resources that are not owned
drm/i915: Pin pages whilst mapping the dma-buf
drm/i915: enable trickle feed on Haswell
x86: add early quirk for reserving Intel graphics stolen memory v5
drm/i915: split PCI IDs out into i915_drm.h v4
i915_gem: Convert kmem_cache_alloc(...GFP_ZERO) to kmem_cache_zalloc
...
The patch replaces all occurrences of struct fb_videomode by
more accurate struct videomode. The change allows to remove
mode conversion function and simplifies clock divider calculation.
Clock configuration is moved to separate function.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Systems with Intel graphics controllers set aside memory exclusively for
gfx driver use. This memory is not always marked in the E820 as
reserved or as RAM, and so is subject to overlap from E820 manipulation
later in the boot process. On some systems, MMIO space is allocated on
top, despite the efforts of the "RAM buffer" approach, which simply
rounds memory boundaries up to 64M to try to catch space that may decode
as RAM and so is not suitable for MMIO.
v2: use read_pci_config for 32 bit reads instead of adding a new one
(Chris)
add gen6 stolen size function (Chris)
v3: use a function pointer (Chris)
drop gen2 bits (Daniel)
v4: call e820_sanitize_map after adding the region
v5: fixup comments (Peter)
simplify loop (Chris)
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66726
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66844
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
For use by userspace (at some point in the future) and other kernel code.
v2: move PCI IDs to uabi (Chris)
move PCI IDs to drm/ (Dave)
v3: fixup Quanta detection - needs to come first (Daniel)
v4: fix up PCI match structure init for easier use by userspace (Chris)
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This patch adds the notion of a drm_bridge. A bridge is a chained
device which hangs off an encoder. The drm driver using the bridge
should provide the association between encoder and bridge. Once a
bridge is associated with an encoder, it will participate in mode
set, and dpms (via the enable/disable hooks).
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex writes:
This is the radeon drm-next request. Big changes include:
- support for dpm on CIK parts
- support for ASPM on CIK parts
- support for berlin GPUs
- major ring handling cleanup
- remove the old 3D blit code for bo moves in favor of CP DMA or sDMA
- lots of bug fixes
[airlied: fix up a bunch of conflicts from drm_order removal]
* 'drm-next-3.12' of git://people.freedesktop.org/~agd5f/linux: (898 commits)
drm/radeon/dpm: make sure dc performance level limits are valid (CI)
drm/radeon/dpm: make sure dc performance level limits are valid (BTC-SI) (v2)
drm/radeon: gcc fixes for extended dpm tables
drm/radeon: gcc fixes for kb/kv dpm
drm/radeon: gcc fixes for ci dpm
drm/radeon: gcc fixes for si dpm
drm/radeon: gcc fixes for ni dpm
drm/radeon: gcc fixes for trinity dpm
drm/radeon: gcc fixes for sumo dpm
drm/radeonn: gcc fixes for rv7xx/eg/btc dpm
drm/radeon: gcc fixes for rv6xx dpm
drm/radeon: gcc fixes for radeon_atombios.c
drm/radeon: enable UVD interrupts on CIK
drm/radeon: fix init ordering for r600+
drm/radeon/dpm: only need to reprogram uvd if uvd pg is enabled
drm/radeon: check the return value of uvd_v1_0_start in uvd_v1_0_init
drm/radeon: split out radeon_uvd_resume from uvd_v4_2_resume
radeon kms: fix uninitialised hotplug work usage in r100_irq_process()
drm/radeon/audio: set up the sads on DCE3.2 asics
drm/radeon: fix handling of variable sized arrays for router objects
...
Conflicts:
drivers/gpu/drm/i915/i915_dma.c
drivers/gpu/drm/i915/i915_gem_dmabuf.c
drivers/gpu/drm/i915/intel_pm.c
drivers/gpu/drm/radeon/cik.c
drivers/gpu/drm/radeon/ni.c
drivers/gpu/drm/radeon/r600.c
This adds a helper function to extract the speaker allocation
data block from the EDID. This data block describes what speakers
are present on the display device.
v2: update per Ville Syrjälä's comments
v3: fix copy/paste typo in memory allocation
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Rafał Miłecki <zajec5@gmail.com>
Let applications know whether the kernel supports asynchronous page
flipping.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
This lets drivers see the flags requested by the application
[airlied: fixup for rcar/imx/msm]
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
Unfortunately, I haven't been thorough enough in:
commit ddecb10cf4
Author: Lespiau, Damien <damien.lespiau@intel.com>
Date: Tue Aug 20 00:53:04 2013 +0100
drm: Remove drm_mode_create_dithering_property()
And forgot to remove the dithering_mode_property member of struct
drm_mode_config.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
Render nodes provide an API for userspace to use non-privileged GPU
commands without any running DRM-Master. It is useful for offscreen
rendering, GPGPU clients, and normal render clients which do not perform
modesetting.
Compared to legacy clients, render clients no longer need any
authentication to perform client ioctls. Instead, user-space controls
render/client access to GPUs via filesystem access-modes on the
render-node. Once a render-node was opened, a client has full access to
the client/render operations on the GPU. However, no modesetting or ioctls
that affect global state are allowed on render nodes.
To prevent privilege-escalation, drivers must explicitly state that they
support render nodes. They must mark their render-only ioctls as
DRM_RENDER_ALLOW so render clients can use them. Furthermore, they must
support clients without any attached master.
If filesystem access-modes are not enough for fine-grained access control
to render nodes (very unlikely, considering the versaitlity of FS-ACLs),
you may still fall-back to fd-passing from server to client (which allows
arbitrary access-control). However, note that revoking access is
currently impossible and unlikely to get implemented.
Note: Render clients no longer have any associated DRM-Master as they are
supposed to be independent of any server state. DRM core highly depends on
file_priv->master to be non-NULL for modesetting/ctx/etc. commands.
Therefore, drivers must be very careful to not require DRM-Master if they
support DRIVER_RENDER.
So far render-nodes are protected by "drm_rnodes". As long as this
module-parameter is not set to 1, a driver will not create render nodes.
This allows us to experiment with the API a bit before we stabilize it.
v2: drop insecure GEM_FLINK to force use of dmabuf
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This can then be used by DRM drivers to setup their vendor infoframes.
v2: Fix hmdi typo (Simon Farnsworth)
v3: Adapt to the hdmi_vendor_infoframe rename
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
This function is only used inside drm_edid.c.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
The VMA offset manager uses a device-global address-space. Hence, any
user can currently map any offset-node they want. They only need to guess
the right offset. If we wanted per open-file offset spaces, we'd either
need VM_NONLINEAR mappings or multiple "struct address_space" trees. As
both doesn't really scale, we implement access management in the VMA
manager itself.
We use an rb-tree to store open-files for each VMA node. On each mmap
call, GEM, TTM or the drivers must check whether the current user is
allowed to map this file.
We add a separate lock for each node as there is no generic lock available
for the caller to protect the node easily.
As we currently don't know whether an object may be used for mmap(), we
have to do access management for all objects. If it turns out to slow down
handle creation/deletion significantly, we can optimize it in several
ways:
- Most times only a single filp is added per bo so we could use a static
"struct file *main_filp" which is checked/added/removed first before we
fall back to the rbtree+drm_vma_offset_file.
This could be even done lockless with rcu.
- Let user-space pass a hint whether mmap() should be supported on the
bo and avoid access-management if not.
- .. there are probably more ideas once we have benchmarks ..
v2: add drm_vma_node_verify_access() helper
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
... not only when the dma-buf is freshly created. In contrived
examples someone else could have exported/imported the dma-buf already
and handed us the gem object with a flink name. If such on object gets
reexported as a dma_buf we won't have it in the handle cache already,
which breaks the guarantee that for dma-buf imports we always hand
back an existing handle if there is one.
This is exercised by igt/prime_self_import/with_one_bo_two_files
Now if we extend the locked sections just a notch more we can also
plug th racy buf/handle cache setup in handle_to_fd:
If evil userspace races a concurrent gem close against a prime export
operation we can end up tearing down the gem handle before the dma buf
handle cache is set up. When handle_to_fd gets around to adding the
handle to the cache there will be no one left to clean it up,
effectily leaking the bo (and the dma-buf, since the handle cache
holds a ref on the dma-buf):
Thread A Thread B
handle_to_fd:
lookup gem object from handle
creates new dma_buf
gem_close on the same handle
obj->dma_buf is set, but file priv buf
handle cache has no entry
obj->handle_count drops to 0
drm_prime_add_buf_handle sets up the handle cache
-> We have a dma-buf reference in the handle cache, but since the
handle_count of the gem object already dropped to 0 no on will clean
it up. When closing the drm device fd we'll hit the WARN_ON in
drm_prime_destroy_file_private.
The important change is to extend the critical section of the
filp->prime.lock to cover the gem handle lookup. This serializes with
a concurrent gem handle close.
This leak is exercised by igt/prime_self_import/export-vs-gem_close-race
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
... and move it to the top of the function to avoid a forward
declaration.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
with the reworking semantics and locking of the obj->dma_buf pointer
this pointer is always set as long as there's still a gem handle
around and a dma_buf associated with this gem object.
Also, the per file-priv lookup-cache for dma-buf importing is also
unified between foreign and native objects.
Hence we don't need to special case the clean any more and can simply
drop the clause which only runs for foreing objects, i.e. with
obj->import_attach set.
Note that with this change (actually with the previous one to always
set up obj->dma_buf even for foreign objects) it is no longer required
to set obj->import_attach when importing a foreing object. So update
comments accordingly, too.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The export dma-buf cache is semantically similar to an flink name. So
semantically it makes sense to treat it the same and remove the name
(i.e. the dma_buf pointer) and its references when the last gem handle
disappears.
Again we need to be careful, but double so: Not just could someone
race and export with a gem close ioctl (so we need to recheck
obj->handle_count again when assigning the new name), but multiple
exports can also race against each another. This is prevented by
holding the dev->object_name_lock across the entire section which
touches obj->dma_buf.
With the new scheme we also need to reinstate the obj->dma_buf link at
import time (in case the only reference userspace has held in-between
was through the dma-buf fd and not through any native gem handle). For
simplicity we don't check whether it's a native object but
unconditionally set up that link - with the new scheme of removing the
obj->dma_buf reference when the last handle disappears we can do that.
To make it clear that this is not just for exported buffers anymore
als rename it from export_dma_buf to dma_buf.
To make sure that now one can race a fd_to_handle or handle_to_fd with
gem_close we use the same tricks as in flink of extending the
dev->object_name_locking critical section. With this change we finally
have a guaranteed 1:1 relationship (at least for native objects)
between gem objects and dma-bufs, even accounting for races (which can
happen since the dma-buf itself holds a reference while in-flight).
This prevent igt/prime_self_import/export-vs-gem_close-race from
Oopsing the kernel. There is still a leak though since the per-file
priv dma-buf/handle cache handling is racy. That will be fixed in a
later patch.
v2: Remove the bogus dma_buf_put from the export_and_register_object
failure path if we've raced with the handle count dropping to 0.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The gem flink name holds a reference onto the object itself, and this
self-reference would prevent an flink'ed object from every being
freed. To break that loop we remove the flink name when the last
userspace handle disappears, i.e. when obj->handle_count reaches 0.
Now in gem_open we drop the dev->object_name_lock between the flink
name lookup and actually adding the handle. This means a concurrent
gem_close of the last handle could result in the flink name getting
reaped right inbetween, i.e.
Thread 1 Thread 2
gem_open gem_close
flink -> obj lookup
handle_count drops to 0
remove flink name
create_handle
handle_count++
If someone now flinks this object again, we'll get a new flink name.
We can close this race by removing the lock dropping and making the
entire lookup+handle_create sequence atomic. Unfortunately to still be
able to share the handle_create logic this requires a
handle_create_tail function which drops the lock - we can't hold the
object_name_lock while calling into a driver's ->gem_open callback.
Note that for flink fixing this race isn't really important, since
racing gem_open against gem_close is clearly a userspace bug. And no
matter how the race ends, we won't leak any references.
But with dma-buf where the userspace dma-buf fd itself is refcounted
this is a valid sequence and hence we should fix it. Therefore this
patch here is just a warm-up exercise (and for consistency between
flink buffer sharing and dma-buf buffer sharing with self-imports).
Also note that this extension of the critical section in gem_open
protected by dev->object_name_lock only works because it's now a
mutex: A spinlock would conflict with the potential memory allocation
in idr_preload().
This is exercises by igt/gem_flink_race/flink_name.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
I want to wrap the creation of a dma-buf from a gem object in it,
so that the obj->export_dma_buf cache can be atomically filled in.
Instead of creating a new mutex just for that variable I've figured
I can reuse the existing dev->object_name_lock, especially since
the new semantics will exactly mirror the flink obj->name already
protected by that lock.
v2: idr_preload/idr_preload_end is now an atomic section, so need to
move the mutex locking outside.
[airlied: fix up conflict with patch to make debugfs use lock]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
No one outside of drm should use this, the official interfaces are
drm_gem_handle_create and drm_gem_handle_delete. The handle refcounting
is purely an implementation detail of gem.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is the 2nd attempt, I've always been a bit dissatisified with the
tricky nature of the first one:
http://lists.freedesktop.org/archives/dri-devel/2012-July/025451.html
The issue is that the flink ioctl can race with calling gem_close on
the last gem handle. In that case we'll end up with a zero handle
count, but an flink name (and it's corresponding reference). Which
results in a neat space leak.
In my first attempt I've solved this by rechecking the handle count.
But fundamentally the issue is that ->handle_count isn't your usual
refcount - it can be resurrected from 0 among other things.
For those special beasts atomic_t often suggest way more ordering that
it actually guarantees. To prevent being tricked by those hairy
semantics take the easy way out and simply protect the handle with the
existing dev->object_name_lock.
With that change implemented it's dead easy to fix the flink vs. gem
close reace: When we try to create the name we simply have to check
whether there's still officially a gem handle around and if not refuse
to create the flink name. Since the handle count decrement and flink
name destruction is now also protected by that lock the reace is gone
and we can't ever leak the flink reference again.
Outside of the drm core only the exynos driver looks at the handle
count, and tbh I have no idea why (it's just for debug dmesg output
luckily).
I've considered inlining the drm_gem_object_handle_free, but I plan to
add more name-like things (like the exported dma_buf) to this scheme,
so it's clearer to leave the handle freeing in its own function.
This is exercised by the new gem_flink_race i-g-t testcase, which on
my snb leaks gem objects at a rate of roughly 1k objects/s.
v2: Fix up the error path handling in handle_create and make it more
robust by simply calling object_handle_unreference.
v3: Fix up the handle_unreference logic bug - atomic_dec_and_test
retursn 1 for 0. Oops.
v4: Squash in inlining of drm_gem_object_handle_reference as suggested
by Dave Airlie and add a note that we now have a testcase.
Cc: Dave Airlie <airlied@gmail.com>
Cc: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
It's only used in drm_platform.c.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This function is only used in drm_fb_cma_helper.c.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
These were introduced in the very first DRM commit:
commit f453ba0460
Author: Dave Airlie <airlied@redhat.com>
Date: Fri Nov 7 14:05:41 2008 -0800
DRM: add mode setting support
Add mode setting support to the DRM layer.
But are unused.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
It's only used in drm_crtc.c.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The last user was removed in
commit 575dc34ee0
Author: Dave Airlie <airlied@redhat.com>
Date: Mon Sep 7 18:43:26 2009 +1000
drm/kms: remove old std mode fallback code.
The new code adds modes in the helper, which makes more sense
I disliked the non-driver code adding modes.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This was last used by nouveau, replaced by a driver-specific property
in:
commit de69185573
Author: Ben Skeggs <bskeggs@redhat.com>
Date: Mon Oct 17 12:23:41 2011 +1000
drm/nouveau: improve dithering properties, and implement proper auto mode
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
A few prototypes have been left in the headers, their function friends
long gone.
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
So almost two years ago I've tried to nuke the procfs code already
once before:
http://lists.freedesktop.org/archives/dri-devel/2011-October/015707.html
The conclusion was that userspace drivers (specifically libdrm device
node detection) stopped relying on procfs in 2001. But after some
digging it turned out that the drmstat tool in libdrm is still using
those files (but only when certain options are set). So we've decided
to keep profcs.
But I when I've started to dig around again what exactly this tool
does I've noticed that it tries to read the "mem", "vm", and "vma"
files from procfs. Now as far my git history digging shows "mem" never
did anything useful (at least in the version that first showed up in
upstream history in 2004) and the file was remove in
commit 955b12def4
Author: Ben Gamari <bgamari@gmail.com>
Date: Tue Feb 17 20:08:49 2009 -0500
drm: Convert proc files to seq_file and introduce debugfs
Which means that for over 4 years drmstat has been broken, and no one
cared. In my opinion that's proof enough that no one is actually using
drmstat, and so that we can savely nuke the procfs support from drm.
While at it fix up the error case cleanup for debugfs in drm_get_minor.
v2: Fix dates, libdrm stopped relying on procfs for drm node detection
in 2001.
v3: fixup compilation warning for !CONFIG_DEBUG_FS, reported by
Fengguang Wu.
Cc: kbuild test robot <fengguang.wu@intel.com>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We might as well have a real ioctl function which checks for the
callbacks. This seems to be a remnant from back in the days when each
drm driver had their own complete ioctl table, with no shared core
drm table at all.
To make really sure no mis-guided user in a kms driver pops up again
explicitly check for that in the new ioctl implementation.
v2: Drop the unused variable I've accidentally left in the code,
spotted by David Herrmann.
Cc: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The new arch_phys_wc_add/del functions do the right thing both with
and without MTRR support in the kernel. So we can drop these
additional checks.
David Herrmann suggest to also kill the DRIVER_USE_MTRR flag since
it's now unused, which spurred me to do a bit a better audit of the
affected drivers. David helped a lot in that. Quoting our mail
discussion:
On Wed, Jul 10, 2013 at 5:41 PM, David Herrmann <dh.herrmann@gmail.com> wrote:
> On Wed, Jul 10, 2013 at 5:22 PM, Daniel Vetter <daniel.vetter@ffwll.ch> wrote:
>> On Wed, Jul 10, 2013 at 3:51 PM, David Herrmann <dh.herrmann@gmail.com> wrote:
>>>> -#if __OS_HAS_MTRR
>>>> -static inline int drm_core_has_MTRR(struct drm_device *dev)
>>>> -{
>>>> - return drm_core_check_feature(dev, DRIVER_USE_MTRR);
>>>> -}
>>>> -#else
>>>> -#define drm_core_has_MTRR(dev) (0)
>>>> -#endif
>>>> -
>>>
>>> That was the last user of DRIVER_USE_MTRR (apart from drivers setting
>>> it in .driver_features). Any reason to keep it around?
>>
>> Yeah, I guess we could rip things out. Which will also force me to
>> properly audit drivers for the eventual behaviour change this could
>> entail (in case there's an x86 driver which did not ask for an mtrr,
>> but iirc there isn't).
>
> david@david-mb ~/dev/kernel/linux $ for i in drivers/gpu/drm/* ; do if
> test -d "$i" ; then if ! grep -q USE_MTRR -r $i ; then echo $i ; fi ;
> fi ; done
> drivers/gpu/drm/exynos
> drivers/gpu/drm/gma500
> drivers/gpu/drm/i2c
> drivers/gpu/drm/nouveau
> drivers/gpu/drm/omapdrm
> drivers/gpu/drm/qxl
> drivers/gpu/drm/rcar-du
> drivers/gpu/drm/shmobile
> drivers/gpu/drm/tilcdc
> drivers/gpu/drm/ttm
> drivers/gpu/drm/udl
> drivers/gpu/drm/vmwgfx
> david@david-mb ~/dev/kernel/linux $
>
> So for x86 gma500,nouveau,qxl,udl,vmwgfx don't set DRIVER_USE_MTRR.
> But I cannot tell whether they break if we call arch_phys_wc_add/del,
> anyway. At least nouveau seemed to work here, but it doesn't use AGP
> or drm_bufs, I guess.
Cool, thanks a lot for stitching together the list of drivers to look
at. So for real KMS drivers it's the drives responsibility to add an
mtrr if it needs one. nouvea, radeon, mgag200, i915 and vmwgfx do that
already. Somehow the savage driver also ends up doing that, I have no
idea why.
Note that gma500 as a pure KMS driver doesn't need MTRR setup since
the platforms that it supports all support PAT. So no MTRRs needed to
get wc iomappings.
The mtrr support in the drm core is all for legacy mappings of garts,
framebuffers and registers. All legacy drivers set the USE_MTRR flag,
so we're good there.
All in all I think we can really just ditch this
/endquote
v2: Also kill DRIVER_USE_MTRR as suggested by David Herrmann
v3: Rebase on top of David Herrmann's agp setup/cleanup changes.
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We have three callers of this function now and it's neither
performance critical nor really small. So an inline function feels
like overkill and unecessarily separates the different parts of the
code.
Since all callers of drm_gem_object_handle_free are now in drm_gem.c
we can make that static (and remove the unused EXPORT_SYMBOL). To
avoid a forward declaration move it (and drm_gem_object_free_bug) up a
bit.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Lifetime rules seem to be solid around ->import_attach. So this patch
just properly documents them.
Note that pointing directly at the attachment might have issues for
devices that have multiple struct device *dev parts constituting the
logical gpu and so might need multiple attachment points. Similarly
for drm devices which don't need a dma attachment at all (like udl).
But fixing that up is material for different patches.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Note that this is slightly tricky since both drivers store their
native objects in dma_buf->priv. But both also embed the base
drm_gem_object at the first position, so the implicit cast is ok.
To use the release helper we need to export it, too.
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This makes it so that reloading a module does not cause all the
connector ids to change, which are user-visible and sometimes used
for configuration.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Basically just extracting some code duplicated in gma500, omapdrm, udl,
and upcoming msm driver.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Variant of drm_gem_create_mmap_offset() which doesn't make the
assumption that virtual size and physical size (obj->size) are the same.
This is needed in omapdrm to deal with tiled buffers. And lets us get
rid of a duplicated and slightly modified version of
drm_gem_create_mmap_offset() in omapdrm.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
A small helper to queue up work to do, from workqueue context, after a
flip. Typically useful to defer unreffing buffers that may be read by
the display controller until vblank.
v1: original
v2: wire up docbook + couple docbook fixes
Signed-off-by: Rob Clark <robdclark@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This function is unused.
Signed-off-by: Stéphane Marchesin <marcheu@chromium.org>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The gma500 driver somehow set the DRIVER_IRQ_VBL flag, but since
there's no code at all to check for this we can kill it. The other two
are completely unused.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
So I've stumbled over drm_fasync and wondered what it does. Digging
that up is quite a story.
First I've had to read up on what this does and ended up being rather
bewildered why peopled loved signals so much back in the days that
they've created SIGIO just for that ...
Then I wondered how this ever works, and what that strange "No-op."
comment right above it should mean. After all calling the core fasync
helper is pretty obviously not a noop. After reading through the
kernels FASYNC implementation I've noticed that signals are only sent
out to the processes attached with FASYNC by calling kill_fasync.
No merged drm driver has ever done that.
After more digging I've found out that the only driver that ever used
this is the so called GAMMA driver. I've frankly never heard of such a
gpu brand ever before. Now FASYNC seems to not have been the only bad
thing with that driver, since Dave Airlie removed it from the drm
driver with prejudice:
commit 1430163b4bbf7b00367ea1066c1c5fe85dbeefed
Author: Dave Airlie <airlied@linux.ie>
Date: Sun Aug 29 12:04:35 2004 +0000
Drop GAMMA DRM from a great height ...
Long story short, the drm fasync support seems to be doing absolutely
nothing. And the only user of it was never merged into the upstream
kernel. And we don't need any fops->fasync callback since the fcntl
implementation in the kernel already implements the noop case
correctly.
So stop this particular cargo-cult and rip it all out.
v2: Kill drm_fasync assignments in rcar (newly added) and imx drivers
(somehow I've missed that one in staging). Also drop the reference in
the drm DocBook. ARM compile-fail reported by Rob Clark.
v3: Move the removal of dev->buf_asnyc assignment in drm_setup to this
patch here.
v4: Actually git add ... tsk.
Cc: Dave Airlie <airlied@linux.ie>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Rob Clark <robdclark@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
So after a lot of digging around in git histories it looks like this
has only ever be used by dri1 render clients. Hence we can fully
disable the entire thing for modesetting drivers and so greatly reduce
the attack surface for potential exploits (or at least tools like
trinity ...).
Also add the drm_legacy prefix for functions which are called from
common code. To further reduce the impact on common code also extract
all the ctx release handling into a function (instead of only
releasing individual handles) and make ctxbitmap_cleanup return void -
it can never fail.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
And hide the checks a bit better. This was already disallowed for
modesetting drivers, so no functinal change here.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
I've decided that some clear markers for what's legacy dri1/non-gem
code is useful. I've opted to use the drm_legacy prefix and then hide
all the checks in that function for better readability in the common
code.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Totally unused, so just rip it out. Anyway, we want drivers to be
fully backwards compatible, allowing them to change behaviour is just
a recipe for them to break badly.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This patch adds tda998x specific parameters to allow it to be configured
for different boards using it. Also, this implements rudimentary audio
support for S/PDIF attached controllers.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Russell King <rmk_kernel@arm.linux.org.uk>
Tested-by: Russell King <rmk_kernel@arm.linux.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
We currently rely on gcc dead-code elimination so the drm_agp_* helpers
are not called if drm_core_has_AGP() is false. That's ugly as hell so
provide "static inline" dummies for the case that AGP is disabled.
Fixes a build-regression introduced by:
commit 28ec711cd4
Author: David Herrmann <dh.herrmann@gmail.com>
Date: Sat Jul 27 16:37:00 2013 +0200
drm/agp: move AGP cleanup paths to drm_agpsupport.c
v2: switch #ifdef -> #if (spotted by Stephen)
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
Neat that QA (and Ben) keeps on humming along while I'm on vacation, so
you already get the next feature pull request:
- proper eLLC support for HSW from Ben
- more interrupt refactoring
- add w/a tags where we implement them already (Damien)
- hangcheck fixes (Chris) + hangcheck stats (Mika)
- flesh out the new vm structs for ppgtt and ggtt (Ben)
- PSR for Haswell, still disabled by default (Rodrigo et al.)
- pc8+ refclock sequence code from Paulo
- more interrupt refactoring from Paulo, unifying ilk/snb with the ivb/hsw
interrupt code
- full solution for the Haswell concurrent reg access issues (Chris)
- fix racy object accounting, used by some new leak tests
- fix sync polarity settings on ch7xxx dvo encoder
- random bits&pieces, little fixes and better debug output all over
[airlied: fix conflict with drm_mm cleanups]
* tag 'drm-intel-next-2013-07-26-fixed' of git://people.freedesktop.org/~danvet/drm-intel: (289 commits)
drm/i915: Do not dereference NULL crtc or fb until after checking
drm/i915: fix pnv display core clock readout out
drm/i915: Replace open-coded offset_in_page()
drm/i915: Retry DP aux_ch communications with a different clock after failure
drm/i915: Add messages useful for HPD storm detection debugging (v2)
drm/i915: dvo_ch7xxx: fix vsync polarity setting
drm/i915: fix the racy object accounting
drm/i915: Convert the register access tracepoint to be conditional
drm/i915: Squash gen lookup through multiple indirections inside GT access
drm/i915: Use the common register access functions for NOTRACE variants
drm/i915: Use a private interface for register access within GT
drm/i915: Colocate all GT access routines in the same file
drm/i915: fix reference counting in i915_gem_create
drm/i915: Use Graphics Base of Stolen Memory on all gen3+
drm/i915: disable stolen mem for OVERLAY_NEEDS_PHYSICAL
drm/i915: add functions to disable and restore LCPLL
drm/i915: disable CLKOUT_DP when it's not needed
drm/i915: extend lpt_enable_clkout_dp
drm/i915: fix up error cleanup in i915_gem_object_bind_to_gtt
drm/i915: Add some debug breadcrumbs to connector detection
...
David Herrmann
Chris Wilson
Gerd Hoffmann
Lespiau, Damien
Mario Kleiner
Dave Airlie
Thierry Reding
Marc-André Lureau
Russell King
Daniel Vetter
Jani Nikula
Ville Syrjälä
Alex Deucher
Andrzej Hajda
Jesse Barnes
Sean Paul
Keith Packard
Ilia Mirkin
Rob Clark
Stéphane Marchesin
Dave Airlie