An unreserve space ioctl OCFS2_IOC_UNRESVSP/64 should reject a negative
length.
Orabug:14789508
Signed-off-by: Tariq Saseed <tariq.x.saeed@oracle.com>
Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes the following sparse warning:
fs/ocfs2/stack_user.c:930:32: warning:
symbol 'ocfs2_ls_ops' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adjust minlen with discard_granularity for FITRIM ioctl(2) if the given
minimum size in bytes is less than it because, discard granularity is
used to tell us that the minimum size of extent that can be discarded by
the storage device.
This is inspired by ext4 commit 5c2ed62fd4 ("ext4: Adjust minlen with
discard_granularity in the FITRIM ioctl") from Lukas Czerner.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For FITRIM ioctl(2), we should not keep silence if the given range
length ls less than a block size as there is no data blocks would be
discareded. Hence it should return EINVAL instead. This issue can be
verified via xfstests/generic/288 which is used for FITRIM argument
handling tests.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For FITRIM ioctl(2), we should return EOPNOTSUPP to inform the user that
the storage device does not support discard if it is, otherwise return
success would confuse the user even though there is no free blocks were
trimmed at all.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ocfs2_alloc_dinode_update_counts() and ocfs2_block_group_set_bits() are
already provided in suballoc.c. So, the same functions in
move_extents.c are not needed any more.
Declare the functions in suballoc.h and remove redundant functions in
move_extents.c.
Signed-off-by: Younger Liu <liuyiyang@hisense.com>
Cc: Younger Liu <younger.liucn@gmail.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Attempt to use the new DLM operations. If it is not supported, use the
traditional ocfs2_controld.
To exchange ocfs2 versioning, we use the LVB of the version dlm lock.
It first attempts to take the lock in EX mode (non-blocking). If
successful (which means it is the first mount), it writes the version
number and downconverts to PR lock. If it is unsuccessful, it reads the
version from the lock.
If this becomes the standard (with o2cb as well), it could simplify
userspace tools to check if the filesystem is mounted on other nodes.
Dan: Since ocfs2_protocol_version are two u8 values, the additional
checks with LONG* don't make sense.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the native DLM locks for version control negotiation. Most of the
framework is taken from gfs2/lock_dlm.c
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is done to differentiate between using and not using controld and
use the connection information accordingly.
We need to be backward compatible. So, we use a new enum
ocfs2_connection_type to identify when controld is used and when it is
not.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We perform this because the DLM recovery callbacks will require the
ocfs2_live_connection structure to record the node information when
dlm_new_lockspace() is updated (in the last patch of the series).
Before calling dlm_new_lockspace(), we need the structure ready for the
.recover_done() callback, which would set oc_this_node. This is the
reason we allocate ocfs2_live_connection beforehand in user_connect().
[AKPM] rc initialization is not required because it assigned in case of
errors. It will be cleared by compiler anyways.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reveiwed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These are the callbacks called by the fs/dlm code in case the membership
changes. If there is a failure while/during calling any of these, the
DLM creates a new membership and relays to the rest of the nodes.
- recover_prep() is called when DLM understands a node is down.
- recover_slot() is called once all nodes have acknowledged
recover_prep and recovery can begin.
- recover_done() is called once the recovery is complete. It returns
the new membership.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is an effort of removing ocfs2_controld.pcmk and getting ocfs2 DLM
handling up to the times with respect to DLM (>=4.0.1) and corosync
(2.3.x). AFAIK, cman also is being phased out for a unified corosync
cluster stack.
fs/dlm performs all the functions with respect to fencing and node
management and provides the API's to do so for ocfs2. For all future
references, DLM stands for fs/dlm code.
The advantages are:
+ No need to run an additional userspace daemon (ocfs2_controld)
+ No controld device handling and controld protocol
+ Shifting responsibilities of node management to DLM layer
For backward compatibility, we are keeping the controld handling code.
Once enough time has passed we can remove a significant portion of the
code. This was tested by using the kernel with changes on older
unmodified tools. The kernel used ocfs2_controld as expected, and
displayed the appropriate warning message.
This feature requires modification in the userspace ocfs2-tools. The
changes can be found at: https://github.com/goldwynr/ocfs2-tools branch:
nocontrold Currently, not many checks are present in the userspace code,
but that would change soon.
This patch (of 6):
Add clustername to cluster connection.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The versioning information is confusing for end-users. The numbers are
stuck at 1.5.0 when the tools version have moved to 1.8.2. Remove the
versioning system in the OCFS2 modules and let the kernel version be the
guide to debug issues.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Acked-by: Sunil Mushran <sunil.mushran@gmail.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 5fbbf8a1a9 ("Score: The commit is for compiling successfully.")
re-introduced "select HAVE_GENERIC_HARDIRQS" in v3.12-rc4, which had
just been removed in v3.12-rc1 by 0244ad004a ("Remove GENERIC_HARDIRQ
config option").
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
dma_pte_free_level() has an off-by-one error when checking whether a pte
is completely covered by a range. Take for example the case of
attempting to free pfn 0x0 - 0x1ff, ie. 512 entries covering the first
2M superpage.
The level_size() is 0x200 and we test:
static void dma_pte_free_level(...
...
if (!(0 > 0 || 0x1ff < 0 + 0x200)) {
...
}
Clearly the 2nd test is true, which means we fail to take the branch to
clear and free the pagetable entry. As a result, we're leaking
pagetables and failing to install new pages over the range.
This was found with a PCI device assigned to a QEMU guest using vfio-pci
without a VGA device present. The first 1M of guest address space is
mapped with various combinations of 4K pages, but eventually the range
is entirely freed and replaced with a 2M contiguous mapping.
intel-iommu errors out with something like:
ERROR: DMA PTE for vPFN 0x0 already set (to 5c2b8003 not 849c00083)
In this case 5c2b8003 is the pointer to the previous leaf page that was
neither freed nor cleared and 849c00083 is the superpage entry that
we're trying to replace it with.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We usually rely on the fact that struct members not specified in the
initializer are set to NULL. So do that with fsnotify function pointers
as well.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Eric Paris <eparis@parisplace.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After removing event structure creation from the generic layer there is
no reason for separate .should_send_event and .handle_event callbacks.
So just remove the first one.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Eric Paris <eparis@parisplace.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently fsnotify framework creates one event structure for each
notification event and links this event into all interested notification
groups. This is done so that we save memory when several notification
groups are interested in the event. However the need for event
structure shared between inotify & fanotify bloats the event structure
so the result is often higher memory consumption.
Another problem is that fsnotify framework keeps path references with
outstanding events so that fanotify can return open file descriptors
with its events. This has the undesirable effect that filesystem cannot
be unmounted while there are outstanding events - a regression for
inotify compared to a situation before it was converted to fsnotify
framework. For fanotify this problem is hard to avoid and users of
fanotify should kind of expect this behavior when they ask for file
descriptors from notified files.
This patch changes fsnotify and its users to create separate event
structure for each group. This allows for much simpler code (~400 lines
removed by this patch) and also smaller event structures. For example
on 64-bit system original struct fsnotify_event consumes 120 bytes, plus
additional space for file name, additional 24 bytes for second and each
subsequent group linking the event, and additional 32 bytes for each
inotify group for private data. After the conversion inotify event
consumes 48 bytes plus space for file name which is considerably less
memory unless file names are long and there are several groups
interested in the events (both of which are uncommon). Fanotify event
fits in 56 bytes after the conversion (fanotify doesn't care about file
names so its events don't have to have it allocated). A win unless
there are four or more fanotify groups interested in the event.
The conversion also solves the problem with unmount when only inotify is
used as we don't have to grab path references for inotify events.
[hughd@google.com: fanotify: fix corruption preventing startup]
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Eric Paris <eparis@parisplace.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rounding of name length when passing it to userspace was done in several
places. Provide a function to do it and use it in all places.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Eric Paris <eparis@parisplace.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Record actively mapped pages and provide an api for asserting a given
page is dma inactive before execution proceeds. Placing
debug_dma_assert_idle() in cow_user_page() flagged the violation of the
dma-api in the NET_DMA implementation (see commit 7787380336 "net_dma:
mark broken").
The implementation includes the capability to count, in a limited way,
repeat mappings of the same page that occur without an intervening
unmap. This 'overlap' counter is limited to the few bits of tag space
in a radix tree. This mechanism is added to mitigate false negative
cases where, for example, a page is dma mapped twice and
debug_dma_assert_idle() is called after the page is un-mapped once.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Power supply notifier
- Several drivers gained DT support
- Added Maxim 14577 driver
- Change of maintainer
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=QMHd
-----END PGP SIGNATURE-----
Merge tag 'for-v3.14' of git://git.infradead.org/battery-2.6
Pull battery updates from Dmitry Eremin-Solenikov:
"I'm picking up power supply maintainership from Anton Vorontov. Could
you please pull battery-2.6 git tree changes prepared for the v3.14
release.
Highlights:
- Power supply notifier
- Several drivers gained DT support
- Added Maxim 14577 driver
- Change of maintainer"
* tag 'for-v3.14' of git://git.infradead.org/battery-2.6:
MAINTAINERS: Pick up power supply maintainership
max17042_battery: Add IRQF_ONESHOT flag to use default irq handler
gpio-charger: Support wakeup events
power_supply: Add charger support for Maxim 14577
dt: Binding documentation for isp1704 charger
isp1704_charger: Add DT support
charger-manager: of_cm_parse_desc() should be static
bq2415x_charger: Add DT support
power_supply: Add power_supply_get_by_phandle
bq2415x_charger: Use power_supply notifier for automode
power: reset: Add as3722 power-off driver
mfd: AS3722: Add dt node properties for system power controller
charger-manager: Support deivce tree in charger manager driver
charger-manager: Modify the way of checking battery's temperature
power_supply: Add power_supply notifier
New drivers
- Samsung Maxim 14577; Micro USB, Regulator, IRQ Controller and Battery Charger
- TI/National Semiconductor LP3943 I2C GPIO Expander and PWM Generator
Existing driver adaptions
- Expansion of Wolfson Arizona DSP and High-Pass filter controls
- TI TWL6040 default Regmap support and Regcache addition/bypass
- Some nice Smatch catch fixes
- Conversion of TI OMAP-USB and TI TWL6030 to endian neutralness
- ChromeOS EC timing (delay) adaptions and added dependency on OF
- Many constifications of 'struct {mfd_cell,regmap_irq,et. al}'
- Watchdog support added for NVIDIA AS3722
- Convert functions to static in TI AM335x
- Realigned previously defeated functionality in TI AM335x
- IIO ADC-TSC concurrency dead-lock/timeout resolution
- Addition of Power Management and Clock support for Samsung core
- DEFINE_PCI_DEVICE_TABLE macro removal from MFD Subsystem
- Greater use of irqdomain functionality in ST-E AB8500
- Removal of 'include/linux/mfd/abx500/ab8500-gpio.h'
- Wolfson WM831x PMIC Power Management changes s/poweroff/shutdown/
- Device Tree documentation added for TI/Nat Semi LP3943
- Version detection and voltage tables for TI TPS6586x PMIC devices
- Simplification of Freescale MC13XXX (de-)initialisation routines
- Clean-up and simplification of the Realtek parent driver
- Added support for RTL8402 Realtek PCI-Express card reader
- Resource leak fix for Maxim 77686
- Possible suspend BUG() fix in OMAP USB TLL
- Support for new Wolfson WM5110 Revision (D)
- Testing of automatic assignment of of_node in mfd_add_device()
- Reversion of the above when it started to cause issues
- Remove legacy Platform Data from;
TI TWL Core, Qualcomm SSBI and ST-E ABx500 Pinctrl
- Clean-ups; tabbing issues, function name changes, 'drvdata = NULL' removal,
unused uninitialised warning mitigation, error message clarity,
removal of redundant/duplicate checks, licensing (GPL -> GPL2),
coding consistency, duplicate function declaration, ret checks,
commit corrections, redundant of_match_ptr() helper removal,
spelling, #if-deffery removal and header guards name changes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=PuTE
-----END PGP SIGNATURE-----
Merge tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfd
Pull MFD changes from Lee Jones:
"New drivers
- Samsung Maxim 14577; Micro USB, Regulator, IRQ Controller and
Battery Charger
- TI/National Semiconductor LP3943 I2C GPIO Expander and PWM
Generator
Existing driver adaptions
- Expansion of Wolfson Arizona DSP and High-Pass filter controls
- TI TWL6040 default Regmap support and Regcache addition/bypass
- Some nice Smatch catch fixes
- Conversion of TI OMAP-USB and TI TWL6030 to endian neutralness
- ChromeOS EC timing (delay) adaptions and added dependency on OF
- Many constifications of 'struct {mfd_cell,regmap_irq,et.al}'
- Watchdog support added for NVIDIA AS3722
- Convert functions to static in TI AM335x
- Realigned previously defeated functionality in TI AM335x
- IIO ADC-TSC concurrency dead-lock/timeout resolution
- Addition of Power Management and Clock support for Samsung core
- DEFINE_PCI_DEVICE_TABLE macro removal from MFD Subsystem
- Greater use of irqdomain functionality in ST-E AB8500
- Removal of 'include/linux/mfd/abx500/ab8500-gpio.h'
- Wolfson WM831x PMIC Power Management changes s/poweroff/shutdown/
- Device Tree documentation added for TI/Nat Semi LP3943
- Version detection and voltage tables for TI TPS6586x PMIC devices
- Simplification of Freescale MC13XXX (de-)initialisation routines
- Clean-up and simplification of the Realtek parent driver
- Added support for RTL8402 Realtek PCI-Express card reader
- Resource leak fix for Maxim 77686
- Possible suspend BUG() fix in OMAP USB TLL
- Support for new Wolfson WM5110 Revision (D)
- Testing of automatic assignment of of_node in mfd_add_device()
- Reversion of the above when it started to cause issues
- Remove legacy Platform Data from;
TI TWL Core, Qualcomm SSBI and ST-E ABx500 Pinctrl
- Clean-ups; tabbing issues, function name changes, 'drvdata = NULL'
removal, unused uninitialised warning mitigation, error
message clarity, removal of redundant/duplicate checks,
licensing (GPL -> GPL2), coding consistency, duplicate
function declaration, ret checks, commit corrections,
redundant of_match_ptr() helper removal, spelling,
#if-deffery removal and header guards name changes"
* tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfd: (78 commits)
mfd: wm5110: Add register patch for rev D chip
mfd: omap-usb-tll: Don't hold lock during pm_runtime_get/put_sync()
gpio: lp3943: Remove redundant of_match_ptr helper
mfd: sta2x11-mfd: Use named constants for pci_power_t values
Documentation: mfd: Fix LDO index in s2mps11.txt
mfd: Cleanup mfd-mcp-sa11x0.h header
mfd: max8997: Use "IS_ENABLED(CONFIG_OF)" for DT code.
mfd: twl6030: Fix endianness problem in IRQ handler
mfd: sec-core: Add cells for S5M8767-clocks
mfd: max14577: Remove redundant of_match_ptr helper
mfd: twl6040: Fix sparse non static symbol warning
mfd: Revert "mfd: Always assign of_node in mfd_add_device()"
mfd: rtsx: Fix sparse non static symbol warning
mfd: max77693: Set proper maximum register for MUIC regmap
mfd: max77686: Fix regmap resource leak on driver remove
mfd: Represent correct filenames in file headers
mfd: rtsx: Add support for card reader rtl8402
mfd: rtsx: Add set pull control macro and simplify rtl8411
mfd: max8997: Enforce mfd_add_devices() return value check
mfd: mc13xxx: Simplify probe() & remove()
...
It was holiday season, so no wonder that there are little changes in
framework level, although diffstat shows quite many changes spreaded
over sound/* directories. Most of changes are cleanups, code
refactoring and fixes.
Some highlights:
- Removal of OSS sleep_on usages by Arnd
- Simplified memalloc helper codes, drop obsoleted features;
now it's built into PCM driver instead of an individual module
- Warn if PCM buffer preallocation fails, which will show page
allocation issues more clearly
- Compress offload API updates for sample rates by Vinod
- PCM glitch workaround on ctxfi emu20k1 by Sarah
- Drop cs46xx DSP blobs, using firmware loader now
- USB-audio quitks for Plantronics Gamecom 780, Creative VF0420,
and Focusrite Saffire 6
HD-audio specifics:
- Standardize Kconfigs of HD-audio codec drivers;
now "make localmodconfig" recognizes configs properly (finally!)
- Parallel PM implementation by Mengdong
- BayleyBay/ValleyView2 board fixups
- Broadwell audio support
- Runtime PM improvement (PantherPoint, etc)
- Quirks: Dell subwooer, Gigabyte mobo jack detection oddity,
Dell AiO click noise fixes, Dell headset mic fixes, etc
- Automatic bind with HDMI codec parser without generic parser
- More AD codec fixes (since 3.12 regression) including the automatic
stereo mix support
- Common Thinkpad ACPI helper for Realtek and Conexant codecs
ASoC specifics:
- Update to the generic DMA code to support deferred probe and managed
resources
- New drivers for BCM2835 (used in Raspberry Pi), Tegra with MAX98090
and Analog Devices AXI I2S and S/PDIF controller IPs
- Device tree support for the simple card, max98090 and cs42l52
- Conversion of the Samsung drivers to native dmaengine, making them
multiplatform compatible and hopefully helping keep them more modern
and up to date.
- More regmap conversions, including a very welcome one for twl6040
from Peter Ujfalusi
- A big overhaul of the DaVinci drivers also from Peter Ujfalusi
- Lots of DMA updates from Lars-Peter
- Improvements to the constraints handling code from Lars-Peter
- A very helpful conversion of the TWL4030 driver to regmap from Peter
- A new driver for the Freescale ESAI controller from Nicolin Chen
- Conversion of some of the drivers to use params_width()
- Extensions to DPCM for use with compressed audio from Liam
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=IWy2
-----END PGP SIGNATURE-----
Merge tag 'sound-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It was holiday season, so no wonder that there are little changes in
framework level, although diffstat shows quite many changes spreaded
over sound/* directories. Most of changes are cleanups, code
refactoring and fixes.
Some highlights:
- Removal of OSS sleep_on usages by Arnd
- Simplified memalloc helper codes, drop obsoleted features; now it's
built into PCM driver instead of an individual module
- Warn if PCM buffer preallocation fails, which will show page
allocation issues more clearly
- Compress offload API updates for sample rates by Vinod
- PCM glitch workaround on ctxfi emu20k1 by Sarah
- Drop cs46xx DSP blobs, using firmware loader now
- USB-audio quitks for Plantronics Gamecom 780, Creative VF0420, and
Focusrite Saffire 6
HD-audio specifics:
- Standardize Kconfigs of HD-audio codec drivers; now "make
localmodconfig" recognizes configs properly (finally!)
- Parallel PM implementation by Mengdong
- BayleyBay/ValleyView2 board fixups
- Broadwell audio support
- Runtime PM improvement (PantherPoint, etc)
- Quirks: Dell subwooer, Gigabyte mobo jack detection oddity, Dell
AiO click noise fixes, Dell headset mic fixes, etc
- Automatic bind with HDMI codec parser without generic parser
- More AD codec fixes (since 3.12 regression) including the automatic
stereo mix support
- Common Thinkpad ACPI helper for Realtek and Conexant codecs
ASoC specifics:
- Update to the generic DMA code to support deferred probe and
managed resources
- New drivers for BCM2835 (used in Raspberry Pi), Tegra with MAX98090
and Analog Devices AXI I2S and S/PDIF controller IPs
- Device tree support for the simple card, max98090 and cs42l52
- Conversion of the Samsung drivers to native dmaengine, making them
multiplatform compatible and hopefully helping keep them more
modern and up to date.
- More regmap conversions, including a very welcome one for twl6040
from Peter Ujfalusi
- A big overhaul of the DaVinci drivers also from Peter Ujfalusi
- Lots of DMA updates from Lars-Peter
- Improvements to the constraints handling code from Lars-Peter
- A very helpful conversion of the TWL4030 driver to regmap from Peter
- A new driver for the Freescale ESAI controller from Nicolin Chen
- Conversion of some of the drivers to use params_width()
- Extensions to DPCM for use with compressed audio from Liam"
* tag 'sound-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (396 commits)
ASoC: dapm: Fix double prefix addition
ASoC: compress: Add suport for DPCM into compressed audio
ASoC: DPCM: make some DPCM API calls non static for compressed usage
ASoC: core: Fix possible NULL pointer dereference of pcm->config
ALSA: hda - add headset mic detect quirks for some Dell machines
ASoC: tlv320aic32x4: Fix regmap range_min
ASoC: core: Return -ENOTSUPP from set_sysclk() if no operation provided
ASoC: dapm: Change prototype of soc_widget_read
ASoC: samsung: Remove SND_DMAENGINE_PCM_FLAG_NO_RESIDUE flag
ASoC: axi-{spdif,i2s}: Remove SND_DMAENGINE_PCM_FLAG_NO_RESIDUE flag
ASoC: generic-dmaengine-pcm: Check DMA residue granularity
ASoC: generic-dmaengine-pcm: Check NO_RESIDUE flag at runtime
dma: pl330: Set residue_granularity
dma: Indicate residue granularity in dma_slave_caps
ASoC: simple-card: fix one bug to writing to the platform data
ASoC: pcm: Use snd_pcm_rate_mask_intersect() helper
ALSA: Add helper function for intersecting two rate masks
ASoC: s6000: Don't mix SNDRV_PCM_RATE_CONTINUOUS with specific rates
ASoC: fsl: Don't mix SNDRV_PCM_RATE_CONTINUOUS with specific rates
ASoC: pcm: Properly initialize hw->rate_max
...
- New driver for the Qualcomm TLMM pin controller and its
msm8x74 subdriver.
- New driver for the Broadcom Capri BCM281xx SoC.
- New subdriver for the imx25 pin controller.
- New subdriver for the Tegra124 pin controller.
- Lock GPIO lines as IRQs for select combined pin control and
GPIO drivers for baytrail and sirf.
- Some semi-big refactorings and extenstions to the sirf
driver.
- Lots of patching, cleanup and fixing in the Renesas "PFC"
driver and associated subdrivers as usual. It is settling
down a little bit now it seems.
- Minor fixes and incremental updates here and there as usual.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ol2E
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull bulk pin control changes from Linus Walleij:
"This has been queued and tested for a while. Lots of action here,
like in the GPIO tree, embedded stuff like this is really hot now it
seems. Details in the signed tag. I'm especially happy about the
Qualcomm driver as it is used in such a huge subset of mobile handsets
out there, and these platforms in general need better upstream support
- New driver for the Qualcomm TLMM pin controller and its msm8x74
subdriver.
- New driver for the Broadcom Capri BCM281xx SoC.
- New subdriver for the imx25 pin controller.
- New subdriver for the Tegra124 pin controller.
- Lock GPIO lines as IRQs for select combined pin control and GPIO
drivers for baytrail and sirf.
- Some semi-big refactorings and extenstions to the sirf driver.
- Lots of patching, cleanup and fixing in the Renesas "PFC" driver
and associated subdrivers as usual. It is settling down a little
bit now it seems.
- Minor fixes and incremental updates here and there as usual"
* tag 'pinctrl-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits)
pinctrl: sunxi: Honor GPIO output initial vaules
pinctrl: capri: add dependency on OF
ARM: bcm11351: Enable pinctrl for Broadcom Capri SoCs
ARM: pinctrl: Add Broadcom Capri pinctrl driver
pinctrl: Add pinctrl binding for Broadcom Capri SoCs
pinctrl: Add void * to pinctrl_pin_desc
pinctrl: st: Fix a typo in probe
pinctrl: Fix some typos and grammar issues in the documentation
pinctrl: sirf: lock IRQs when starting them
pinctrl: sirf: put gpio interrupt pin into input status automatically
pinctrl: sirf: use only one irq_domain for the whole device node
pinctrl: single: fix infinite loop caused by bad mask
pinctrl: single: fix pcs_disable with bits_per_mux
pinctrl: single: fix DT bindings documentation
pinctrl: as3722: Set pin to output mode for some function
pinctrl: sirf: add pin group for USP0 with only RX or TX frame sync
pinctrl: sirf: fix the pins of sdmmc5 connected with TriG
pinctrl: sirf: add lost usp1_uart_nostreamctrl group for atlas6
pinctrl: sunxi: Add Allwinner A20 clock output pin functions
pinctrl/lantiq: fix typo
...
A big set this merge window, as we have much going on in
this subsystem. Major changes this time:
- Some core improvements and cleanups to the new GPIO
descriptor API. This seems to be working now so we can
start the exodus to this API, moving gradually away from
the global GPIO numberspace.
- Incremental improvements to the ACPI GPIO core, and move
the few GPIO ACPI clients we have to the GPIO descriptor
API right *now* before we go any further. We actually
managed to contain this *before* we started to litter
the kernel with yet another hackish global numberspace for
the ACPI GPIOs, which is a big win.
- The RFkill GPIO driver and all platforms using it have
been migrated to use the GPIO descriptors rather than
fixed number assignments. Tegra machine has been migrated
as part of this.
- New drivers for MOXA ART, Xtensa GPIO32 and SMSC SCH311x.
Those should be really good examples of how I expect a
nice GPIO driver to look these days.
- Do away with custom GPIO implementations on a major
part of the ARM machines: ks8695, lpc32xx, mv78xx0.
Make a first step towards the same in the horribly
convoluted Samsung S3C include forest. We expect to
continue to clean this up as we move forward.
- Flag GPIO lines used for IRQ on adnp, bcm-kona, em,
intel-mid and lynxpoint.
This makes the GPIOlib core aware that a certain GPIO line
is used for IRQs and can then enforce some semantics such
as disallowing a GPIO line marked as in use for IRQ to be
switched to output mode.
- Drop all use of irq_set_chip_and_handler_name().
The name provided in these cases were just unhelpful
tags like "mux" or "demux".
- Extend the MCP23s08 driver to handle interrupts.
- Minor incremental improvements for rcar, lynxpoint, em
74x164 and msm drivers.
- Some non-urgent bug fixes here and there, duplicate
#includes and that usual kind of cleanups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=lW2i
-----END PGP SIGNATURE-----
Merge tag 'gpio-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO tree bulk changes from Linus Walleij:
"A big set this merge window, as we have much going on in this
subsystem. The changes to other subsystems (notably a slew of ARM
machines as I am doing away with their custom APIs) have all been
ACKed to the extent possible.
Major changes this time:
- Some core improvements and cleanups to the new GPIO descriptor API.
This seems to be working now so we can start the exodus to this
API, moving gradually away from the global GPIO numberspace.
- Incremental improvements to the ACPI GPIO core, and move the few
GPIO ACPI clients we have to the GPIO descriptor API right *now*
before we go any further. We actually managed to contain this
*before* we started to litter the kernel with yet another hackish
global numberspace for the ACPI GPIOs, which is a big win.
- The RFkill GPIO driver and all platforms using it have been
migrated to use the GPIO descriptors rather than fixed number
assignments. Tegra machine has been migrated as part of this.
- New drivers for MOXA ART, Xtensa GPIO32 and SMSC SCH311x. Those
should be really good examples of how I expect a nice GPIO driver
to look these days.
- Do away with custom GPIO implementations on a major part of the ARM
machines: ks8695, lpc32xx, mv78xx0. Make a first step towards the
same in the horribly convoluted Samsung S3C include forest. We
expect to continue to clean this up as we move forward.
- Flag GPIO lines used for IRQ on adnp, bcm-kona, em, intel-mid and
lynxpoint.
This makes the GPIOlib core aware that a certain GPIO line is used
for IRQs and can then enforce some semantics such as disallowing a
GPIO line marked as in use for IRQ to be switched to output mode.
- Drop all use of irq_set_chip_and_handler_name(). The name provided
in these cases were just unhelpful tags like "mux" or "demux".
- Extend the MCP23s08 driver to handle interrupts.
- Minor incremental improvements for rcar, lynxpoint, em 74x164 and
msm drivers.
- Some non-urgent bug fixes here and there, duplicate #includes and
that usual kind of cleanups"
Fix up broken Kconfig file manually to make this all compile.
* tag 'gpio-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (71 commits)
gpio: mcp23s08: fix casting caused build warning
gpio: mcp23s08: depend on OF_GPIO
gpio: mcp23s08: Add irq functionality for i2c chips
ARM: S5P[v210|c100|64x0]: Fix build error
gpio: pxa: clamp gpio get value to [0,1]
ARM: s3c24xx: explicit dependency on <plat/gpio-cfg.h>
ARM: S3C[24|64]xx: move includes back under <mach/> scope
Documentation / ACPI: update to GPIO descriptor API
gpio / ACPI: get rid of acpi_gpio.h
gpio / ACPI: register to ACPI events automatically
mmc: sdhci-acpi: convert to use GPIO descriptor API
ARM: s3c24xx: fix build error
gpio: f7188x: set can_sleep attribute
gpio: samsung: Update documentation
gpio: samsung: Remove hardware.h inclusion
gpio: xtensa: depend on HAVE_XTENSA_GPIO32
gpio: clps711x: Enable driver compilation with COMPILE_TEST
gpio: clps711x: Use of_match_ptr()
net: rfkill: gpio: convert to descriptor-based GPIO interface
leds: s3c24xx: Fix build failure
...
Pull i2c updates from Wolfram Sang:
"For 3.14, the I2C subsystem has the following to offer:
- new drivers for Renesas RIIC and RobotFuzz OSIF
- driver cleanups & improvements & bugfixes
Pretty standard stuff this time, I'd say. There is more complex stuff
coming up, but I didn't have the bandwidth between the years to pull
it in for this release. Sadly"
* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (26 commits)
i2c: s3c2410: fix quirk usage for 64-bit
i2c: pnx: Use devm_*() functions
i2c: at91: add a new compatibility string for the at91sam9261
i2c-ismt: support I2C_SMBUS_I2C_BLOCK_DATA transaction type
i2c: Add bus driver for for OSIF USB i2c device.
i2c: i2c-tiny-usb: Remove RobotFuzz USB vendor:product ID
i2c: designware: remove HAVE_CLK build dependecy
Documentation: i2c: Remove obsolete example
i2c: nomadik: remove platform data header
i2c: nomadik: auto-calculate slave setup time
i2c: viperboard: remove superfluous assignment
i2c: xilinx: Use devm_* functions
i2c: xilinx: Do not enable irq before irq handler
i2c: xilinx: Fix i2c checkpatch warnings
i2c: at91: document clock properties
i2c: isch: Use devm_request_region()
i2c: viperboard: Use devm_kzalloc() functions
i2c: imx: propagate irq error code in probe
i2c: s3c2410: dont need CPU_FREQ transitions for exynos series
i2c: s3c2410: Add polling mode support
...
Pull security layer updates from James Morris:
"Changes for this kernel include maintenance updates for Smack, SELinux
(and several networking fixes), IMA and TPM"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (39 commits)
SELinux: Fix memory leak upon loading policy
tpm/tpm-sysfs: active_show() can be static
tpm: tpm_tis: Fix compile problems with CONFIG_PM_SLEEP/CONFIG_PNP
tpm: Make tpm-dev allocate a per-file structure
tpm: Use the ops structure instead of a copy in tpm_vendor_specific
tpm: Create a tpm_class_ops structure and use it in the drivers
tpm: Pull all driver sysfs code into tpm-sysfs.c
tpm: Move sysfs functions from tpm-interface to tpm-sysfs
tpm: Pull everything related to /dev/tpmX into tpm-dev.c
char: tpm: nuvoton: remove unused variable
tpm: MAINTAINERS: Cleanup TPM Maintainers file
tpm/tpm_i2c_atmel: fix coccinelle warnings
tpm/tpm_ibmvtpm: fix unreachable code warning (smatch warning)
tpm/tpm_i2c_stm_st33: Check return code of get_burstcount
tpm/tpm_ppi: Check return value of acpi_get_name
tpm/tpm_ppi: Do not compare strcmp(a,b) == -1
ima: remove unneeded size_limit argument from ima_eventdigest_init_common()
ima: update IMA-templates.txt documentation
ima: pass HASH_ALGO__LAST as hash algo in ima_eventdigest_init()
ima: change the default hash algorithm to SHA1 in ima_eventdigest_ng_init()
...
Evaluation of revision D of WM5110 suggests updates to the register
patch for optimal performance. For the sake of clarity rev C of the chip
does not require a register patch.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
pm_runtime_get/put_sync() can sleep so don't hold spinlock while
calling them.
This patch prevents a BUG() during system suspend when
CONFIG_DEBUG_ATOMIC_SLEEP is enabled.
Bug is present in Kernel versions v3.9 onwards.
Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
'lp3943_gpio_of_match' is always compiled in. Hence the
helper macro is not needed.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
If nothing more than to improve code readability.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression pdev;
@@
pci_set_power_state(pdev,
- 0
+ PCI_D0
)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
LDO indices start from 1. Fix the example appropriately.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Commit a1fd844c6e ("ARM: sa1100: move platform_data definitions")
moved the file to the current location but forgot to remove the pointer
to its previous location. Clean it up. While at it also change the header
file protection macros appropriately.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Instead of "#if define CONFIG_OF" use "IS_ENABLED(CONFIG_OF)"
option for DT code to avoid if-deffery in code.
Signed-off-by: Manish Badarkhe <badarkhe.manish@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The current TWL 6030 IRQ handler assumes little endianness.
This change makes it endian-neutral.
Signed-off-by: Danke Xie <d.xie@sta.samsung.com>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
S5M8767 chip has 3 crystal oscillators running at 32KHz. These are
supported by s2mps11-clk driver.
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
'max14577_dt_match' is always compiled in. Hence the helper macro
is not needed.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Fixes the following sparse warning:
drivers/mfd/twl6040.c:89:20: warning:
symbol 'twl6040_patch' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This reverts commit 68044bee13770918e0b28dd44aa98c889ec7558f.
We've had confirmed reports of this patch causing unforeseen issues
with existing MFD users. It has been agreed by the original author
and myself that reversion is the best solution.
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Fixes the following sparse warning:
drivers/mfd/rtl8411.c:473:6: warning:
symbol 'rtl8411_init_common_params' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The MUIC block in max77693 has different I2C address than PMIC. The
driver allocated two regmaps: for PMIC and MUIC. However it used the
same regmap_config (with max_register field) for both regmaps. Actual
maximum address of register for MUIC is different than for PMIC.
Define another regmap_config for MUIC with proper max_register value.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The regmap used by max77686 MFD driver was not freed with regmap_exit()
on driver exit. This lead to leak of resources.
Replace regmap_init_i2c() call in driver probe with initialization of
managed register map so the regmap will be properly freed by the device
management code.
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The original author(s) probably copy/pasted these headers from the
existing public header files.
Signed-off-by: Laszlo Papp <lpapp@kde.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
rtl8402 is much like rtl8411, so just add it to rtl8411.c
Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add set pull control macro to reduce code for setting pull control, and
use a common init function to reduce code for rtl8411.c. So this patch
is used to just simplify code.
Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The original author provided a random return value check which is
redundant and seemingly floating. This patch not only relocates
the check so it is more clearly associated with the invokation of
mfd_add_devices(), but provides a store for the error value. We
also print a meaningful message on error before returning.
Signed-off-by: Laszlo Papp <lpapp@kde.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This patch simplifies probe() and remove() functions by moving
some initialisation code out from the I2C/SPI init() and exit()
functions and into the core driver.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Symbol MFD_MC13783 always selected by MFD_MC13XXX, so no need
to keep additional symbol.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
mc13xxx_get_flags() declaration given twice.
This patch removes this duplicate.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Tariq Saeed
Wei Yongjun
Jie Liu
Younger Liu
Goldwyn Rodrigues
Geert Uytterhoeven
Alex Williamson
Jan Kara
Dan Williams
Linus Torvalds
Charles Keepax
Roger Quadros
Sachin Kamat
Julia Lawall
Manish Badarkhe
Danke Xie
Tushar Behera
Lee Jones
Krzysztof Kozlowski
Laszlo Papp
Micky Ching
Alexander Shiyan
Stephen Boyd