Checking of kmalloc() seems to have been committed - as
cx23885_dvb_register() is checking for != 0 return, returning
-ENOMEM should be fine here. While at it address the coccicheck
suggestion to move to kmemdup rather than using kmalloc+memcpy.
Fixes: 46b21bbaa8 ("[media] Add support for DViCO FusionHDTV DVB-T Dual Express2")
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Ref: https://bugzilla.kernel.org/show_bug.cgi?id=199323
Users are experiencing problems with the DVBSky S960/S960C USB devices
since the following commit:
9d659ae: ("locking/mutex: Add lock handoff to avoid starvation")
The device malfunctions after running for an indeterminable period of
time, and the problem can only be cleared by rebooting the machine.
It is possible to encourage the problem to surface by blocking the
signal to the LNB.
Further debugging revealed the cause of the problem.
In the following capture:
- thread #1325 is running m88ds3103_set_frontend
- thread #42 is running ts2020_stat_work
a> [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 07 80
[1325] usb 1-1: dvb_usb_v2_generic_io: <<< 08
[42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 68 3f
[42] usb 1-1: dvb_usb_v2_generic_io: <<< 08 ff
[42] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11
[42] usb 1-1: dvb_usb_v2_generic_io: <<< 07
[42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 60 3d
[42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 ff
b> [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 07 00
[1325] usb 1-1: dvb_usb_v2_generic_io: <<< 07
[42] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11
[42] usb 1-1: dvb_usb_v2_generic_io: <<< 07
[42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 60 21
[42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 ff
[42] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11
[42] usb 1-1: dvb_usb_v2_generic_io: <<< 07
[42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 60 66
[42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 ff
[1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11
[1325] usb 1-1: dvb_usb_v2_generic_io: <<< 07
[1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 60 02 10 0b
[1325] usb 1-1: dvb_usb_v2_generic_io: <<< 07
Two i2c messages are sent to perform a reset in m88ds3103_set_frontend:
a. 0x07, 0x80
b. 0x07, 0x00
However, as shown in the capture, the regmap mutex is being handed over
to another thread (ts2020_stat_work) in between these two messages.
>From here, the device responds to every i2c message with an 07 message,
and will only return to normal operation following a power cycle.
Use regmap_multi_reg_write to group the two reset messages, ensuring
both are processed before the regmap mutex is unlocked.
Signed-off-by: James Hutchinson <jahutchinson99@googlemail.com>
Reviewed-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Commit 14f4eaedda ("media: dvbsky: fix driver unregister logic") fixed
a use-after-free by removing the reference to the frontend after deleting
the backing i2c device.
This has the unfortunate side effect the frontend device is never freed
in the dvb core leaving a dangling device, leading to errors when the
dvb core tries to register the frontend after e.g. a replug as reported
here: https://www.spinics.net/lists/linux-media/msg138181.html
media: dvbsky: issues with DVBSky T680CI
===
[ 561.119145] sp2 8-0040: CIMaX SP2 successfully attached
[ 561.119161] usb 2-3: DVB: registering adapter 0 frontend 0 (Silicon Labs
Si2168)...
[ 561.119174] sysfs: cannot create duplicate filename '/class/dvb/
dvb0.frontend0'
===
The use after free happened as dvb_usbv2_disconnect calls in this order:
- dvb_usb_device::props->exit(...)
- dvb_usbv2_adapter_frontend_exit(...)
+ if (fe) dvb_unregister_frontend(fe)
+ dvb_usb_device::props->frontend_detach(...)
Moving the release of the i2c device from exit() to frontend_detach()
avoids the dangling pointer access and allows the core to unregister
the frontend.
This was originally reported for a DVBSky T680CI, but it also affects
the MyGica T230C. As all supported devices structure the registration/
unregistration identically, apply the change for all device types.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
We forgot to set "ret" on this error path.
Fixes: e8454ff7b9 ("[media] drivers:media:radio: wl128x: FM Driver Common sources")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
There is no need to have the 'T *v' variable static
since new value always be assigned before use it.
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
ERROR: do not initialise statics to NULL
Signed-off-by: claudiojpaz <claudiojpaz@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The driver should really call dm365_isif_setup_pinmux() through a callback,
but uses a hack to include a davinci specific machine header file when
compile testing instead. This works almost everywhere, but not on the
ARM omap1 platform, which has another header named mach/mux.h. This
causes a build failure:
drivers/staging/media/davinci_vpfe/dm365_isif.c:2028:2: error: implicit declaration of function 'davinci_cfg_reg' [-Werror,-Wimplicit-function-declaration]
davinci_cfg_reg(DM365_VIN_CAM_WEN);
^
drivers/staging/media/davinci_vpfe/dm365_isif.c:2028:2: error: this function declaration is not a prototype [-Werror,-Wstrict-prototypes]
drivers/staging/media/davinci_vpfe/dm365_isif.c:2028:18: error: use of undeclared identifier 'DM365_VIN_CAM_WEN'
davinci_cfg_reg(DM365_VIN_CAM_WEN);
^
drivers/staging/media/davinci_vpfe/dm365_isif.c:2029:18: error: use of undeclared identifier 'DM365_VIN_CAM_VD'
davinci_cfg_reg(DM365_VIN_CAM_VD);
^
drivers/staging/media/davinci_vpfe/dm365_isif.c:2030:18: error: use of undeclared identifier 'DM365_VIN_CAM_HD'
davinci_cfg_reg(DM365_VIN_CAM_HD);
^
drivers/staging/media/davinci_vpfe/dm365_isif.c:2031:18: error: use of undeclared identifier 'DM365_VIN_YIN4_7_EN'
davinci_cfg_reg(DM365_VIN_YIN4_7_EN);
^
drivers/staging/media/davinci_vpfe/dm365_isif.c:2032:18: error: use of undeclared identifier 'DM365_VIN_YIN0_3_EN'
davinci_cfg_reg(DM365_VIN_YIN0_3_EN);
^
7 errors generated.
Exclude omap1 from compile-testing, under the assumption that all others
still work.
Fixes: 4907c73dee ("media: staging: davinci_vpfe: allow building with COMPILE_TEST")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Building adv748x fails now unless V4L2_FWNODE is selected:
drivers/media/i2c/adv748x/adv748x-core.o: In function `adv748x_probe':
adv748x-core.c:(.text+0x1b2c): undefined reference to `v4l2_fwnode_endpoint_parse'
Fixes: 6a18865da8 ("media: i2c: adv748x: store number of CSI-2 lanes described in device tree")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The i.MX7 capture support forgot to change the group ID for the CSI
to the IPU CSI in VDIC sub-device, it was left at the i.MX7 CSI
group ID.
Fixes: 67673ed550 ("media: staging/imx: rearrange group id to take in account IPU")
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
strscpy() returns a negative value on failure unlike strlcpy(),
so fix the WARN_ON accordingly.
Signed-off-by: Hans Petter Selasky <hps@selasky.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: added commit message]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The s_stream callback was not being called for the first entity in the
stream pipeline array.
Instead of verifying the type of the node (video or subdevice) and
calling s_stream from the second entity in the pipeline, do this process
for all the entities in the pipeline for consistency.
The previous code was not a problem because the first entity is a video
device and not a subdevice, but this patch prepares vimc to allow
setting some configuration in the entity before calling s_stream.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Tested-by: André Almeida <andre.almeida@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: fix line-too-long warning]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
There is no need to have the frame field in the vimc_stream struct.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Tested-by: André Almeida <andre.almeida@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The type V4L2_FRMSIZE_TYPE_CONTINUOUS expects a step of 1.
This fixes v4l2-compliance test error:
fail: v4l2-test-formats.cpp(184): invalid step_width/height for continuous framesize
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: FAIL
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The state TASK_UNINTERRUPTIBLE should be set just before
schedule_timeout() call, so it knows the sleep mode it should enter.
There is no point in setting TASK_UNINTERRUPTIBLE at the initialization
of the thread as schedule_timeout() will set the state back to
TASK_RUNNING.
This fixes a warning in __might_sleep() call, as it's expecting the
task to be in TASK_RUNNING state just before changing the state to
a sleeping state.
Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The format of the sink pad should be a bayer mbus format.
This fixes a kernel NULL pointer dereference error that was caused when
the stream starts because the configured format was not found in the
pixelmap table.
Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
There is no point to continuing assignment after memory allocation
failed, rather throw error immediately.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: rebase and remove empty line before the if]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
When streaming is stopped all URBs are killed, but in fill_frame and in
bulk_irq this results in an attempt to resubmit the killed URB. That is
not what you want and causes spurious kernel messages.
So check if streaming has stopped before resubmitting.
Also check against gspca_dev->streaming rather than vb2_start_streaming_called()
since vb2_start_streaming_called() will return true when in stop_streaming,
but gspca_dev->streaming is set to false when stop_streaming is called.
Fixes: 6992effe53 ("gspca: Kill all URBs before releasing any of them")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
__media_pipeline_start() does WARN_ON() when active pipe doesn't
match the input arg entity's pipe.
Replace WARN_ON with a conditional and error message that includes
names of both entities.
Signed-off-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Clang-9 makes some different inlining decisions compared to gcc, which
leads to a warning about a possible stack overflow problem when building
with CONFIG_KASAN, including when setting asan-stack=0, which avoids
most other frame overflow warnings:
drivers/media/platform/vicodec/codec-fwht.c:673:12: error: stack frame size of 2224 bytes in function 'encode_plane'
Manually adding noinline_for_stack annotations in those functions
called by encode_plane() or decode_plane() that require a significant
amount of kernel stack makes this impossible to happen with any
compiler.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
We should be updating *pos. The current code is a no-op.
Fixes: 1c1e45d17b ("V4L/DVB (7786): cx18: new driver for the Conexant CX23418 MPEG encoder chip")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
We had intended to update *pos, but the current code is a no-op.
Fixes: 1a0adaf37c ("V4L/DVB (5345): ivtv driver for Conexant cx23416/cx23415 MPEG encoder/decoder")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
clang-8 warns about one function here when KASAN is enabled, even
without the 'asan-stack' option:
drivers/media/usb/go7007/go7007-fw.c:1551:5: warning: stack frame size of 2656 bytes in function
I have reported this issue in the llvm bugzilla, but to make
it work with the clang-8 release, a small annotation is still
needed.
Link: https://bugs.llvm.org/show_bug.cgi?id=38809
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: fix checkpatch warning]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Two saa7146/hexium files contain a construct that causes a warning
when built with clang:
drivers/media/pci/saa7146/hexium_orion.c:210:12: error: stack frame size of 2272 bytes in function 'hexium_probe'
[-Werror,-Wframe-larger-than=]
static int hexium_probe(struct saa7146_dev *dev)
^
drivers/media/pci/saa7146/hexium_gemini.c:257:12: error: stack frame size of 2304 bytes in function 'hexium_attach'
[-Werror,-Wframe-larger-than=]
static int hexium_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info)
^
This one happens regardless of KASAN, and the problem is that a
constructor to initialize a dynamically allocated structure leads
to a copy of that structure on the stack, whereas gcc initializes
it in place.
Link: https://bugs.llvm.org/show_bug.cgi?id=40776
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: fix checkpatch warnings]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The ISC driver currently supports ITU-R 601 encoding which
utilizes the external hsync and vsync signals. ITU-R 656
format removes the need for these pins by embedding the
sync pulses within the data packet.
To support this feature, enable necessary register bits
when this feature is enabled via device tree.
Signed-off-by: Ken Sloat <ksloat@aampglobal.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
H6 has improved VPU. It supports 10-bit HEVC decoding and AFBC output
format for HEVC.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
H6 VPU doesn't work if DMA offset is set.
Add a quirk for it.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This adds a compatible for H6. H6 VPU supports 10-bit HEVC decoding and
additional AFBC output format for HEVC.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The last user of this state has been converted, so we can now drop
this. Requeueing causes the queue to become unordered, which causes
problems with requests and (in the future) fences.
Since it is no longer needed, just get rid of this.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The cobalt driver is the only driver that uses VB2_BUF_STATE_REQUEUEING.
Replace it by VB2_BUF_STATE_ERROR so we can drop support for the
REQUEUEING state.
The requeueing state was used in the cobalt driver to optimize
buffer handling while waiting for a valid signal: by requeueing
buffers internally there was no need for userspace to handle and
requeue buffers with the ERROR flag set.
However, requeueing also makes the buffer handling unordered, which
is generally a bad idea. Requeueing also does not work with requests
and any future fence support.
Since it is really a minor optimization in the cobalt driver it is
best to just return the buffer in an ERROR state. With this change
support for requeueing can now be removed in vb2.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Avoid call of dmaengine_terminate_all() between
dmaengine_prep_slave_single() and dmaengine_submit() by locking
the whole DMA submission sequence.
Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Start streaming was sometimes failing because of pm_runtime_get_sync()
non-0 return value. In fact return value was not an error but a
positive value (1), indicating that PM was already enabled.
Fix this by going to error path only with negative return value.
Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Function `sh_veu_find_fmt` returns an address that is an addition of a
base pointer `sh_veu_fmt` and an offset. The base pointer refers to a
global variable of which address cannot be NULL. Therefore, this commit
removes the NULL pointer checks on the return values of function
`sh_veu_find_fmt`.
Signed-off-by: Shaobo He <shaobo@cs.utah.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Commit 0650a91499 ("media: mtk-vcodec: Correct return type for mem2mem
buffer helpers") fixed the return types for mem2mem buffer helper
functions, but omitted two occurrences that are accessed in the
mtk_v4l2_debug() macro. These only trigger compiler errors when DEBUG is
defined.
Fixes: 0650a91499 ("media: mtk-vcodec: Correct return type for mem2mem buffer helpers")
Signed-off-by: Alexandre Courbot <acourbot@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add the SoC specific information for RZ/G2M(r8a774a1) SoC.
The VIN module of RZ/G2M is similar to R-Car M3-W.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Add the MIPI CSI-2 driver support for RZ/G2M(r8a774a1) SoC.
The CSI-2 module of RZ/G2M is similar to R-Car M3-W.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
devm_ioremap_resource() already prints an error message on failure, so
there is no need to repeat that.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
if imx7_csi_try_fmt() fails, cc variable won't be
initialized and csi->cc[sdformat->pad] would be pointing
to a random location.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
We accidentally return IS_ERR(), which is 1, instead of the PTR_ERR()
which is the negative error code.
Fixes: 7807063b86 ("media: staging/imx7: add MIPI CSI-2 receiver subdev for i.MX7")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
The second IPU internal sub-devices were being registered and links
to them created even when the second IPU is not present. This is wrong
for i.MX6 S/DL and i.MX53 which have only a single IPU.
Fixes: e130291212 ("[media] media: Add i.MX media core driver")
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
For the functions that add and remove the internal IPU subdevice
descriptors, rename them to make clear they are the subdevs internal
to the IPU. Also rename the platform data structure for the internal
IPU subdevices. No functional changes.
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
In imx_media_create_csi_of_links(), the 'struct v4l2_fwnode_link' must
be cleared for each endpoint iteration, otherwise if the remote port
has no "reg" property, link.remote_port will not be reset to zero.
This was discovered on the i.MX53 SMD board, since the OV5642 connects
directly to ipu1_csi0 and has a single source port with no "reg"
property.
Fixes: 621b08eabc ("media: staging/imx: remove static media link arrays")
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
On i.MX6, the nearest upstream entity to the CSI can only be the
CSI video muxes or the Synopsys DW MIPI CSI-2 receiver.
However the i.MX53 has no CSI video muxes or a MIPI CSI-2 receiver.
So allow for the nearest upstream entity to the CSI to be something
other than those.
Fixes: bf3cfaa712 ("media: staging/imx: get CSI bus type from nearest
upstream entity")
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Fixes this smatch error:
drivers/staging/media/imx/imx7-mipi-csis.c:716 mipi_csis_set_fmt() error: we previously assumed 'fmt' could be null (see line 709)
fmt is never NULL, so remove the 'fmt &&' condition.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Restore a default case to prepare_vdi_in_buffers() to fix the following
smatch errors:
drivers/staging/media/imx/imx-media-vdic.c:236 prepare_vdi_in_buffers() error: uninitialized symbol 'prev_phys'.
drivers/staging/media/imx/imx-media-vdic.c:237 prepare_vdi_in_buffers() error: uninitialized symbol 'curr_phys'.
drivers/staging/media/imx/imx-media-vdic.c:238 prepare_vdi_in_buffers() error: uninitialized symbol 'next_phys'.
Fixes: 6e537b58de ("media: imx: vdic: rely on VDIC for correct field order")
Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Nicholas Mc Guire
James Hutchinson
Stefan Brüns
Dan Carpenter
Mao Wenan
claudiojpaz
Arnd Bergmann
Steve Longerbeam
YueHaibing
Hans Petter Selasky
Helen Fornazier
Souptick Joarder
Hans Verkuil
Shuah Khan
Ken Sloat
Jernej Skrabec
Hugues Fruchet
Shaobo He
Alexandre Courbot
Biju Das
Geert Uytterhoeven
Rui Miguel Silva
Hans Verkuil