Platform devices tend to have id as -1 when only 1 device exist and
a value >=0 when multiple devices exist, since we plan to store all
these platform devices if multiple exist, there was a requirement to
have id to be >=0.
The patch fixes this problem.
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
keucr lost the disconnect,
so keucr crash when plug-in and then plug-out SD-card quickly.
unmark the part of usb disconnect
Signed-off-by: Al Cho <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fixed the last 5 lines, indented with spaces, replacing spaces with tabs.
Signed-off-by: Clelia V. Korol <cvkorol@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
I remove parenthesis for a return variable, and also delete a space and tab the code line
Signed-off-by: matias <munozmatiasn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Added an space after the definition of the variable MSG_LEVEL_INFO on line 43
Signed-off-by: Emanuel Mariano Ravera <ravera.emanuel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed not required parentheses in return statements.
Signed-off-by: Diego H. Iglesias <diegohi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ai_count and ao_counter are unsigned, check for < 0 doesn't make sense.
Cast them to int.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
chd_dec_major is unsigned, so check chd_dec_major < 0 doesn't make sense.
Since it is used as signed, declare it as int.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
video_nr is unsigned, so check video_nr >= 0 doesn't make sense.
The only "negative" value may be -1, so explicitly check for it.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Handle build case of CONFIG_PM not being enabled.
drivers/staging/bcm/InterfaceInit.c:280: error: 'struct usb_device' has no member named 'autosuspend_delay'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix lots of printk format warnings in bcm. Here is a sample of them:
drivers/staging/bcm/CmHost.c:1955: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'long unsigned int'
drivers/staging/bcm/CmHost.c:1955: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'long unsigned int'
drivers/staging/bcm/CmHost.c:1955: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'long unsigned int'
drivers/staging/bcm/LeakyBucket.c:85: warning: format '%d' expects type 'int', but argument 4 has type 'long int'
drivers/staging/bcm/LeakyBucket.c:85: warning: format '%d' expects type 'int', but argument 3 has type 'long int'
drivers/staging/bcm/LeakyBucket.c:85: warning: format '%d' expects type 'int', but argument 4 has type 'long int'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
keucr driver has a build error when CONFIG_PM is not enabled, so fix that.
drivers/staging/keucr/usb.c:42: error: 'struct us_data' has no member named 'suspend_resume_hook'
drivers/staging/keucr/usb.c:43: error: 'struct us_data' has no member named 'suspend_resume_hook'
drivers/staging/keucr/usb.c:64: error: 'struct us_data' has no member named 'suspend_resume_hook'
drivers/staging/keucr/usb.c:65: error: 'struct us_data' has no member named 'suspend_resume_hook'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Al Cho <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Update keucr TODO with additional work items.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Al Cho <acho@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There are many locations where MAC or BSSID is printed. The plain format
is used in such places. *printf() in kernel recognizes
%pM, %pMF and %pm format parameters to print out 6-byte array as MAC
address. This patch changes plain format to custom %pM which is widely
used in kernel.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch includes changing some defines, necessary for compilation
with the linux-next tree.
Signed-off-by: David Cross <david.cross@cypress.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch remove file system specific (fat_get_block) and vfs calls
from the cyasgadget driver. The current implementation expects user
space to write the file (open, seek to end, 1 byte write), followed by a
call to clear the dirty pages from the the page cache.
Signed-off-by: David Cross <david.cross@cypress.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch contains an update for cyasblkdev_queue.c which is needed for
the kernel update from 2.6.35 to 2.6.36.
Signed-off-by: David Cross <david.cross@cypress.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes the currently broken Kconfig for west bridge by
introducing a dependency on a valid HAL Layer for the driver build.
Signed-off-by: David Cross <david.cross@cypress.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch that fixes up, macros with multiple statements should be enclosed in a do - while loop, coding style issue in the adl_pci9111.c file found by the checkpatch.pl tool
Signed-off-by: Maurice Dawson <mauricedawson2699@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
kmalloc() may fail, if so drop current packet.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
[sven.eckelmann@gmx.de: Removed new introduced deadlock]
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Paul E. McKenney informed us that rcu is misused by leaking pointers to
rcu related elements outside read-side protected critical sections.
He also recommended that it should be checked against the rcu checklist.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
gw_list_lock, gw_list and curr_gw are currently unused members of struct
bat_priv. They will be readded when gateway support is really
implemented.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
During the module shutdown procedure in batman_exit(), a rcu callback is
being scheduled (batman_exit -> hardif_remove_interfaces ->
hardif_remove_interfae -> call_rcu). However, when the kernel unloads
the module, the rcu callback might not have been executed yet, resulting
in a "unable to handle kernel paging request" in __rcu_process_callback
afterwards, causing the kernel to freeze.
The synchronize_net and synchronize_rcu in mesh_free are currently
called before the call_rcu in hardif_remove_interface and have no real
effect on it.
Therefore, we should always flush all rcu callback functions scheduled
during the shutdown procedure using synchronize_net. The call to
synchronize_rcu can be omitted because synchronize_net already calls it.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is for the Asahi Kasei AK8975 3-axis magnetometer. It resides within
the magnetometer section of the IIO subsystem, and implements the raw
magn_x,y,z_raw attributes, as well as magn_x,y,z_scale attributes for
converting to Gauss.
Changed to use the magn_x,y,z_scale attributes, and made those attributes
give the scale factor to conert to Gauss. Also applied more fixes from
feedback.
Keeping mode as an unsigned long. I'm going to add proper power management
at some point anyway, which would deprecate this attribute.
Signed-off-by: Andrew Chew <achew@nvidia.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Per email exchange with Jonathan Cameron, GAIN should instead be SCALE, to
be consistent with documentation.
Resending, since this goes with the 2/2 patch.
Signed-off-by: Andrew Chew <achew@nvidia.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Convert vmbus driver interface function pointer table to constant
The vmbus interface functions are assigned to a constant - vmbus_ops.
Because the vmbus interface function pointer table is converted to a
constant variable -- vmbus_ops, the function GetChannelInterface(),
VmbusGetChannelInterface() and pointer GetChannelInterface are no longer
in use. The deprecated function's work is done by the initialization of
the newly added constant variable vmbus_ops.
I created the new constant variable vmbus_ops and removed the deprecated
function pointer GetChannelInterface in one patch.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remaining errors are due to the use of typedefs. They should dissappear
once the typedefs get cleaned up.
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andy Shevchenko
Joe Perches
Charles Clément
Pavan Savoy
Agustin March
Al Cho
Clelia V. Korol
Ema Cuevas
matias
Emanuel Mariano Ravera
Diego H. Iglesias
Vasiliy Kulikov
Randy Dunlap
David Cross
Maurice Dawson
Marek Lindner
Sven Eckelmann
Linus Lüssing
Manuel Stahl
Andrew Chew
Haiyang Zhang
Jason Cooper