This acts as a reversion of 1c6b2ca5e0 in
the case of UP SH-4, where we still have the risk of a multiple hit
between the slow and fast paths. As seen on SH7780.
Signed-off-by: Hideo Saito <saito@densan.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Use generic_io_base to point out the pci io window, and make sure the
highest port address used is SH7751_PCI_IO_SIZE - 1.
This patch fixes pci io port access for the r2d boards - CONFIG_8139TOO_PIO
now works as expected. So does the alsa driver for CMI8738.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Katsuya MATSUBARA <matsu@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This patch is a fix to make sure readsN/writesN are used over insN/outsN for
ioreadN_rep/iowriteN_rep.
The current state of the sh io code is that mmio operations like readN/writeN
and ioreadN/iowriteN are unaffected by the value of generic_io_base. This is
different fom port based io like inN/outN which gets adjusted using the value
in generic_io_base.
Without this patch ioreadN_rep/iowriteN_rep get their addresses adjusted.
The address for mmio access is adjusted using generic_io_base. This is wrong.
The ata core code currently crashes if generic_io_base is set.
This patch changes ioreadN_rep/iowriteN_rep to follow the same rules as the
rest of the mmio operations, ie don't adjust using generic_io_base.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Katsuya MATSUBARA <matsu@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This patch makes sure ctrl_inN/outN are used instead of inN/outN for on chip
pci registers. Without this patch addresses may be adjusted using the value
in generic_io_base. This patch makes it possible to set generic_io_base and
have pci without reading and writing all over the place.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Katsuya MATSUBARA <matsu@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
The SH-5 build currently fails when trying to build the i8042 code due
to the missing IRQ definitions. These are provided in asm/cpu/irq.h, so
just include that there to get it building again.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
asm/hardware.h doesn't exist any more, and the definitions sh-sci.h
depended on are provided through asm/cpu/addrspace.h these days.
Kill off the bogus include.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
linux/swap.h really wants to include linux/pagemap.h in order to satisfy
the page_cache_release()/release_pages() definition requirements when
CONFIG_SWAP=n. Unfortunately the code in question contains:
/* only sparc can not include linux/pagemap.h in this file
* so leave page_cache_release and release_pages undeclared... */
#define free_page_and_swap_cache(page) \
page_cache_release(page)
#define free_pages_and_swap_cache(pages, nr) \
release_pages((pages), (nr), 0);
so it looks like we're stuck with doing it in asm/tlb.h instead, as
others already do (ARM, CRIS, etc.). Grumble.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This patch removes defunct. led support functions from hp6xx.h since they are now
added in a proper driver (see commit below). Also adds tabs instead of spaces before comments.
*commit d39a7a63eb
Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Improve device detection for maple through longer delay
Experience suggests that a much longer delay in setting up the Maple bus
on the Dreamcast leads to better hardware detection.
Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Previously this took an explicit range, update this to use the same
behaviour as the rest of the SH parts where we simply flush out a line
from the start address.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This patch adds sh7366 cpu supports. Just the most basic things like interrupt
controller, clocks and serial port are included at this point.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This patch removes the maskreg irq code since it is not in use anymore.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This patch converts the highlander CF device from good old machvec readb/writeb
to the new shiny trapped io.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This patch converts the CF device on r2d boards from machvec readb/writeb
to trapped io.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
The idea is that we want to get rid of the in/out/readb/writeb callbacks from
the machvec and replace that with simple inline read and write operations to
memory. Fast and simple for most hardware devices (think pci).
Some devices require special treatment though - like 16-bit only CF devices -
so we need to have some method to hook in callbacks.
This patch makes it possible to add a per-device trap generating filter. This
way we can get maximum performance of sane hardware - which doesn't need this
filter - and crappy hardware works but gets punished by a performance hit.
V2 changes things around a bit and replaces io access callbacks with a
simple minimum_bus_width value. In the future we can add stride as well.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Update the defconfigs for r2d-plus and r2d-1 since we now have new drivers
for sm501 usb, spi-over-sci and epson r9701 rtc in mainline.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This patch converts the unaligned access handling code to use opcode_t
instead of u16. While at it, enable unaligned access handling for sh2a.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This patch adds byte support to the sign extension code. Unaligned access
traps should never be generated on 8-bit io operations, but we will use this
code for trapped io and we do need byte support there.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This patch changes copy_from_user() and copy_to_user() from macros
into static inline functions. This way we can use them as function
pointers. Also unify the 64 bit and 32 bit versions.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
move update_process_times() out from under xtime_lock.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This patch adds basic support for the Migo-R board.
Only simple stuff provided by the cpu specific sh7722 code is in place now,
like serial console port, timers and usb gadget. There is also partial support
for the smc91c111 ethernet controller - unfortunately some driver header file
also needs patching (not included here) to make the driver get IRQ sense
information from the platform data.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This patch removes the now unneeded registration check variable from
struct maple_device. (This patch assumes the include/linux/maple.h file
has already been patched for whitespace errors by
http://lkml.org/lkml/2008/2/6/327)
Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Replacement second-in-series patch:
This patch fixes up memory leaks and, by delaying initialisation, makes
device detection more robust.
It also makes clearer the difference between struct maple_device and
struct device, as well as cleaning up the interrupt request code
(without changing its function in any way).
Also now removes redundant registration checking.
Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This patch is fundamentally about fixing up the whitespace problems
introduced by my previous patch (that brought the code into mainline). A
second patch will follow that will fix memory leaks. The two need to be
applied sequentially.
Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Break out the sign extension code since it's used in multiple places.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This patch adds support for sh7722 devices with prr value 0xa1.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This patch adds the base address of SCIF0 in the case of sh7722.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
These ports are holding up progress and now have been for months. Do the
job for them.
Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
now that platform_device_register_simple() takes a "const chat *".
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This patch fixes the recently introduced declared coherent memory support.
Without this fix a cached memory area is returned by dma_alloc_coherent() -
unless dma_declare_coherent_memory() has setup a separate area.
This patch makes sure an uncached memory area is returned. With this patch
it is now possible to ping through an rtl8139 interface on r2d-plus.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This adds some new magic in the MODPOST phase for CONFIG_MARKERS. Analogous
to the Module.symvers file, the build will now write a Module.markers file
when CONFIG_MARKERS=y is set. This file lists the name, defining module, and
format string of each marker, separated by \t characters. This simple text
file can be used by offline build procedures for instrumentation code,
analogous to how System.map and Module.symvers can be useful to have for
kernels other than the one you are running right now.
The strings are made easy to extract by having the __trace_mark macro define
the name and format together in a single array called __mstrtab_* in the
__markers_strings section. This is straightforward and reliable as long as
the marker structs are always defined by this macro. It is an unreasonable
amount of hairy work to extract the string pointers from the __markers section
structs, which entails handling a relocation type for every machine under the
sun.
Mathieu :
- Ran through checkpatch.pl
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: David Smith <dsmith@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
RCU style multiple probes support for the Linux Kernel Markers. Common case
(one probe) is still fast and does not require dynamic allocation or a
supplementary pointer dereference on the fast path.
- Move preempt disable from the marker site to the callback.
Since we now have an internal callback, move the preempt disable/enable to the
callback instead of the marker site.
Since the callback change is done asynchronously (passing from a handler that
supports arguments to a handler that does not setup the arguments is no
arguments are passed), we can safely update it even if it is outside the
preempt disable section.
- Move probe arm to probe connection. Now, a connected probe is automatically
armed.
Remove MARK_MAX_FORMAT_LEN, unused.
This patch modifies the Linux Kernel Markers API : it removes the probe
"arm/disarm" and changes the probe function prototype : it now expects a
va_list * instead of a "...".
If we want to have more than one probe connected to a marker at a given
time (LTTng, or blktrace, ssytemtap) then we need this patch. Without it,
connecting a second probe handler to a marker will fail.
It allow us, for instance, to do interesting combinations :
Do standard tracing with LTTng and, eventually, to compute statistics
with SystemTAP, or to have a special trigger on an event that would call
a systemtap script which would stop flight recorder tracing.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Mike Mason <mmlnx@us.ibm.com>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Cc: David Smith <dsmith@redhat.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ipwireless (added by 099dc4fb62) is clearly
a net device:
drivers/built-in.o: In function `ipwireless_ppp_start_xmit':
/home/pmundt/devel/git/sh-2.6.25/drivers/char/pcmcia/ipwireless/network.c:165: undefined reference to `skb_under_panic'
/home/pmundt/devel/git/sh-2.6.25/drivers/char/pcmcia/ipwireless/network.c:165: undefined reference to `kfree_skb'
drivers/built-in.o: In function `ipwireless_network_packet_received':
/home/pmundt/devel/git/sh-2.6.25/drivers/char/pcmcia/ipwireless/network.c:377: undefined reference to `__alloc_skb'
/home/pmundt/devel/git/sh-2.6.25/drivers/char/pcmcia/ipwireless/network.c:377: undefined reference to `skb_over_panic'
drivers/built-in.o: In function `ppp_shutdown_interface':
/home/pmundt/devel/git/sh-2.6.25/drivers/net/ppp_generic.c:2517: undefined reference to `unregister_netdev'
/home/pmundt/devel/git/sh-2.6.25/drivers/net/ppp_generic.c:2517: undefined reference to `free_netdev'
[ ... and many more ... ]
select strikes again. ipwireless selects PPP which in turn tries to select
SLHC, both of which are technically "protected" by an if NETDEVICES
in drivers/net/Kconfig. This leads to .config hilarity, with net suddenly
ending up in the SCSI menu:
#
# SCSI device support
#
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_PPP=y
# CONFIG_PHONE is not set
Curiously the SLHC select from PPP doesn't seem to happen, as there's no
CONFIG_SLHC=y (only CONFIG_PPP=y gets set) -- Kconfig bug? Caught with a
randconfig.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hideo Saito
Magnus Damm
Paul Mundt
Kristoffer Ericson
Adrian McMenamin
Peter Zijlstra
Alan Cox
Stephen Rothwell
Linus Torvalds
Mathieu Desnoyers