Граф коммитов

22 Коммитов

Автор SHA1 Сообщение Дата
Stephen Boyd 759fa96132 clk: vt8500: Migrate to clk_hw based registration APIs
Now that we have clk_hw based provider APIs to register clks, we
can get rid of struct clk pointers while registering clks in
these drivers, allowing us to move closer to a clear split of
consumer and provider clk APIs.

Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-08-24 17:35:48 -07:00
Roman Volkov c03d795bee clk: vt8500: rework wm8650_find_pll_bits()
PLL clock on WM8650 is calculated in the following way:

M * parent [O1] => / P [O2] => / D [O3]

Where O2 is 600MHz >= (M * parent) / P >= 300MHz.

Current algorithm does not met this requirement, so that the
function may return rates which are not supported by the hardware.

This patch fixes the algorithm and simplifies the code, reducing
the calculation time by ~10000 times (according to usermode app) by
removing the nested loops.

Signed-off-by: Roman Volkov <rvolkov@v1ros.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-20 17:47:53 -07:00
Arnd Bergmann 27a0becc26 clk: vt8500: fix gcc-4.9 warnings
This fixes some false positive warnings we get with older compiler
versions:

clk-vt8500.c: In function ‘wm8650_find_pll_bits’:
clk-vt8500.c:430:12: ‘best_div2’ may be used uninitialized in this function
clk-vt8500.c:429:12: ‘best_div1’ may be used uninitialized in this function
clk-vt8500.c:428:14: ‘best_mul’ may be used uninitialized in this function
clk-vt8500.c: In function ‘wm8750_find_pll_bits’:
clk-vt8500.c:509:12: ‘best_div2’ may be used uninitialized in this function
clk-vt8500.c:508:12: ‘best_div1’ may be used uninitialized in this function
clk-vt8500.c:507:14: ‘best_mul’ may be used uninitialized in this function
clk-vt8500.c: In function ‘wm8850_find_pll_bits’:
clk-vt8500.c:560:12: ‘best_div2’ may be used uninitialized in this function
clk-vt8500.c:559:12: ‘best_div1’ may be used uninitialized in this function
clk-vt8500.c:558:14: ‘best_mul’ may be used uninitialized in this function

As the local variables are only use for temporaries, we can just
as well assign the final values directly, which also makes the
code slightly shorter.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Roman Volkov <rvolkov@v1ros.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-06-20 17:47:52 -07:00
Arnd Bergmann 7001ec560a clk: vt8500: don't return possibly uninitialized data
The clk-vt8500.c driver would previously enter an endless loop
when invalid settings got requested, this was now fixed. However,
the driver will now return uninitialized data for a subset of those
cases instead, as the gcc correctly warns:

clk/clk-vt8500.c: In function 'wm8650_find_pll_bits':
clk/clk-vt8500.c:423:12: error: 'best_div2' may be used uninitialized in this function [-Werror=maybe-uninitialized]
  *divisor2 = best_div2;
            ^
clk/clk-vt8500.c:422:12: error: 'best_div1' may be used uninitialized in this function [-Werror=maybe-uninitialized]
  *divisor1 = best_div1;
            ^
clk/clk-vt8500.c:421:14: error: 'best_mul' may be used uninitialized in this function [-Werror=maybe-uninitialized]
  *multiplier = best_mul;

This reworks the error handling in the driver so we now return
-EINVAL from clk_round_rate() and clk_set_rate() when we get
impossible inputs.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 090341b0a9 ("clk: vt8500: fix sign of possible PLL values")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-02 11:53:17 -08:00
Andrzej Hajda 090341b0a9 clk: vt8500: fix sign of possible PLL values
With unsigned values underflow in loops can occur resulting in
theoretically infinite loops.

The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci [1].

[1]: http://permalink.gmane.org/gmane.linux.kernel/2038576

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-01-29 16:43:58 -08:00
Sachin Kamat 7acc3bca98 clk: vt8500: Staticize vtwm_pll_ops
'vtwm_pll_ops' is local to this file. Make it static.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-12-19 17:47:32 -08:00
Sebastian Hesselbarth f44089a7f4 ARM: vt8500: prepare for arch-wide .init_time callback
Current vt8500 board init calls of_clk_init() from vtwm_clk_init. To allow
consolidation of DT driven .time_init, move of_clock_init() to a temporary
.time_init callback that will be removed when arch-wide callback is available.
With previous pmc_base parsing helper for vt8500 clock providers, we can also
safely remove the call to vtwm_clk_init() and get rid of some includes.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Tony Prisk <linux@prisktech.co.nz>
Acked-by: Mike Turquette <mturquette@linaro.org>
2013-09-29 21:09:03 +02:00
Sebastian Hesselbarth f9e4a18de7 clk: vt8500: parse pmc_base from clock driver
Currently, clock providers for vt8500 depend on machine_init providing
pmc_base address before calling of_clk_init. With upcoming arch-wide
.time_init calling of_clk_init, we should make clock providers independent
of mach code. This adds a pmc_base parsing helper to current clock provider
that gets called if there is no pmc_base set, yet.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Tony Prisk <linux@prisktech.co.nz>
Acked-by: Mike Turquette <mturquette@linaro.org>
2013-09-29 21:08:54 +02:00
Linus Torvalds 92295f632c The common clock framework changes for 3.11 include new clock drivers
across several different platforms and architectures, fixes to existing
 drivers, a MAINTAINERS file fix and improvements to the basic clock
 types that allow them to be of use to more platforms than before. Only a
 few fixes to the core framework are included with most all of the
 changes landing in the various clock drivers themselves.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJR0hFpAAoJEDqPOy9afJhJcr4P/iA83uEGXIncUzFsbCIsKNGl
 g8yoasz1mpcAng31kK54lasNpFvUYIEBLKWkJBN56h2J5gJ3OKpi7basnQGRykjh
 +rCg2dV4gKDBQzypdeg5kPxf0YLJ8KrwyngcRm5KA3oxKYtmLHt/M2jmDd3DXP0h
 dKo2bkR52eQ7E+ij6/MWgUObxWiFnH0C5Lf+L0tGHsRlRvZTV6NMymX2v0sIOCw9
 hpsrL+7Hqf/+PBfWBljH0IAiI72I5dGEaJoesdTRWz8qut+duwF+OGlzMZnkclMf
 XU444HnvCq3bWGP5NYf9ASO4RRA2IGEoN/eDeiVX5hvkAjeUNHVNhkcUk28Xn9vI
 ZxCxwBXki4wGayiQm4TTgORozmp4i+NwbOuG+s3For1qQU43aA7ppwysFHGXngQa
 bxXT2pNECLX8WR91vkmEdqeQVm6s++R3zltHFUry1VRjTIs5y18Dt9kR6T16NKKQ
 ztoegeQQ8SI7HOLd+tR2v19VXH4zoV3NYAdkCKJX+VXFg+4mgJERmXoU350V3d8D
 wxde7WU4KLO4+1Fngror8wocP8jRRHfhx5jbBVVJ5n6BnF/Mos24g7KI1VPis3Wr
 XZQibxLW0kZ7/hTHykZCff8D4aNqR4fT/UCKyy2Xw1aR0zkD9ZAQq5oWhL99lsnt
 cCe9GBP0Lum9Zq9jjMwL
 =SwMB
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus-3.11' of git://git.linaro.org/people/mturquette/linux

Pull clock framework updates from Mike Turquette:
 "The common clock framework changes for 3.11 include new clock drivers
  across several different platforms and architectures, fixes to
  existing drivers, a MAINTAINERS file fix and improvements to the basic
  clock types that allow them to be of use to more platforms than before.

  Only a few fixes to the core framework are included with most all of
  the changes landing in the various clock drivers themselves."

* tag 'clk-for-linus-3.11' of git://git.linaro.org/people/mturquette/linux: (55 commits)
  clk: tegra: fix ifdef for tegra_periph_reset_assert inline
  clk: tegra: provide tegra_periph_reset_assert alternative
  clk: exynos4: Fix clock aliases for cpufreq related clocks
  clk: samsung: Add MUX_FA macro to pass flag and alias
  clk: add support for Rockchip gate clocks
  clk: vexpress: Make the clock drivers directly available for arm64
  clk: vexpress: Use full node name to identify individual clocks
  clk: tegra: T114: add DFLL DVCO reset control
  clk: tegra: T114: add DFLL source clocks
  clk: tegra: T114: add FCPU clock shaper programming, needed by the DFLL
  clk: gate: add CLK_GATE_HIWORD_MASK
  clk: divider: add CLK_DIVIDER_HIWORD_MASK flag
  clk: mux: add CLK_MUX_HIWORD_MASK
  clk: Always notify whole subtree when reparenting
  MAINTAINERS: make drivers/clk entry match subdirs
  clk: honor CLK_GET_RATE_NOCACHE in clk_set_rate
  clk: use clk_get_rate() for debugfs
  clk: tegra: Use override bits when needed
  clk: tegra: override bits for Tegra30 PLLM
  clk: tegra: override bits for Tegra114 PLLM
  ...
2013-07-03 11:54:50 -07:00
Tony Prisk 419e321df8 clk: vt8500: Fix unbalanced spinlock in vt8500_dclk_set_rate()
With the addition of a DVO clock, a bug is now evident in the vt8500
clock code:
[    0.290000] WARNING: at init/main.c:698 do_one_initcall+0x158/0x18c()
[    0.300000] initcall wm8505fb_driver_init+0x0/0xc returned with disabled int

This is caused by an unbalanced spinlock in vt8500_dclk_set_rate().
Replace the second call to spin_lock_irqsave() with spin_unlock_irqrestore().

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-05-29 16:13:58 -07:00
Tony Prisk 65f2c58f0f clk: vt8500: Remove unnecessary divisor adjustment in vtwm_dclk_set_rate()
The divisor adjustment code to ensure that a divisor is not rounded down,
thereby giving a rate higher than requested, is unnecessary and in some
instances results in the actual rate being much lower than requested due to
rounding errors.

The test is already performed in vtwm_dclk_round_rate(), which is always
called when clk_set_rate is called. Due to rounding errors in the line:
divisor = parent_rate / rate (clk-vt8500.c:160) we will sometimes end up
adjusting the divisor twice - first in round_rate and then again in set_rate.

This patch removes the test/adjustment in vtwm_dclk_set_rate.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-05-29 14:47:17 -07:00
Tony Prisk 518d4709f1 clk: vt8500: Add support for clocks on the WM8850 SoCs
The WM8850 has a different PLL clock to the previous versions. This
patch adds support for the WM8850-style PLL clocks.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-05-29 14:47:05 -07:00
Linus Torvalds 362ed48dee The common clock framework changes for 3.10 include many fixes for
existing platforms, as well as adoption of the framework by new
 platforms and devices.  Some long-needed fixes to the core framework are
 here as well as new features such as improved initialization of clocks
 from DT as well as framework reentrancy for nested clock operations.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRfqtLAAoJEDqPOy9afJhJsxwP/RLvfeeMIU3804ahVNK2C59h
 ehJ06ZP+b0u0A7+YSC7CX1pHXIFW+UoZgYLJiLdV2kEdpOIKMELZyUcEVB97u1Of
 TVlsmHfTLv2zVAq/LYRVSKFYeMUd/6RRoq7Cm6hoj638IVeXG7C+8pei2aVZe++t
 1ENmb4UGFJ7NLfpE5zQ3fEuIfHfuWA8Od6SmPaV/YG5Io8HgkDGF3/tCJURJGII6
 xLN2Rh8qbFktJLVvKe6yLyvUEZiWh8A6HNPyNiFYYGX11wU76zK2wMN3BW6Nn/kW
 3PubzISoKRaoCZvuVK+CoLWnhFl2LteFVVmL1TBc/jxJe6q+rLX33sXl1q9K+SLt
 POnHf/7nDyO3zbZWgfRR1r3FdeZqdLYw8HVsLcOKFcv9n1UligzuUNml5PklKwNh
 BDMmSo5ytS1QPV1e9ZtVrk6IyvDyrenwfDW1Mw43ST6D23FVrivywB4X9ur6WljI
 d1/CBvQXQZ11Hd4OAvqRL8QYFJvc5WlERjSd1j6I6XS6xioKOTKMkUC/KpRcCid9
 avA6mJ5k/a1jTojvh2wl37paI//OzY0VDlxRSeMZIu9Dsn29DnPlE5CLg535Ovu+
 mn9OtLFEDNnlgWCMQYUehGd7ITgtwrB/fxxNeBbMYjDz4AIirR2BIvMR7I8CMTQz
 M0rHu8NpwKH6eqC6kAup
 =+LO3
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus-3.10' of git://git.linaro.org/people/mturquette/linux

Pull clock framework update from Michael Turquette:
 "The common clock framework changes for 3.10 include many fixes for
  existing platforms, as well as adoption of the framework by new
  platforms and devices.

  Some long-needed fixes to the core framework are here as well as new
  features such as improved initialization of clocks from DT as well as
  framework reentrancy for nested clock operations."

* tag 'clk-for-linus-3.10' of git://git.linaro.org/people/mturquette/linux: (44 commits)
  clk: add clk_ignore_unused option to keep boot clocks on
  clk: ux500: fix mismatched types
  clk: vexpress: Add separate SP810 driver
  clk: si5351: make clk-si5351 depend on CONFIG_OF
  clk: export __clk_get_flags for modular clock providers
  clk: vt8500: Missing breaks in vtwm_pll_round_rate/_set_rate.
  clk: sunxi: Unify oscillator clock
  clk: composite: allow fixed rates & fixed dividers
  clk: composite: rename 'div' references to 'rate'
  clk: add si5351 i2c common clock driver
  clk: add device tree fixed-factor-clock binding support
  clk: Properly handle notifier return values
  clk: ux500: abx500: Define clock tree for ab850x
  clk: ux500: Add support for sysctrl clocks
  clk: mvebu: Fix valid value range checking for cpu_freq_select
  clk: Fixup locking issues for clk_set_parent
  clk: Fixup errorhandling for clk_set_parent
  clk: Restructure code for __clk_reparent
  clk: sunxi: drop an unnecesary kmalloc
  clk: sunxi: drop CLK_IGNORE_UNUSED
  ...
2013-04-29 16:43:54 -07:00
Tony Prisk bdca21ecc2 clk: vt8500: Missing breaks in vtwm_pll_round_rate/_set_rate.
The case of PLL_TYPE_WM8750 in both these functions is missing a break
statement causing a fall-through to the default: case.

Insert the missing break statements.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-04-14 00:02:44 -07:00
Arnd Bergmann d6d1053a8b clk: vt8500: Fix "fix device clock divisor calculations"
Patch 72480014b8 "Fix device clock divisor calculations" was apparently
rebased incorrectly before it got upstream, causing a build error.

Replacing the "prate" pointer with the local parent_rate is most
likely the correct solution.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Tony Prisk <linux@prisktech.co.nz>
Cc: Mike Turquette <mturquette@linaro.org>
2013-03-14 22:34:26 +01:00
Prashant Gaikwad 5b6e0adb69 clk: vt8500: Use common of_clk_init() function
Use common of_clk_init() function for clock initialization.

Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com>
Tested-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: added entry for wm8750-pll-clock]

Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-01-24 11:12:52 -08:00
Tony Prisk abb165a80b clk: vt8500: Add support for WM8750/WM8850 PLL clocks
This patch adds support for the new PLL module found in WM8750 and
WM8850 SoCs.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-01-15 16:16:25 -08:00
Tony Prisk 58eb5a6763 clk: vt8500: Fix division-by-0 when requested rate=0
A request to vt8500_dclk_(round_rate/set_rate) with rate=0 results
in a division-by-0 in the kernel.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-01-15 16:16:25 -08:00
Tony Prisk 72480014b8 clk: vt8500: Fix device clock divisor calculations
When calculating device clock divisor values in set_rate and
round_rate, we do a simple integer divide. If parent_rate / rate
has a fraction, this is dropped which results in the device clock
being set too high.

This patch corrects the problem by adding 1 to the calculated
divisor if the division would have had a decimal result.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-01-15 16:16:24 -08:00
Tony Prisk 35a5db55ab clk: vt8500: Fix error in PLL calculations on non-exact match.
When a PLL frequency calculation is performed and a non-exact match
is found the wrong multiplier and divisors are returned.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-01-15 16:16:23 -08:00
Tony Prisk 973e1d1de0 CLK: vt8500: Fix SDMMC clk special cases
This patch adds some additional handling for the SDMMC special case
in round_rate and set_rate which results in invalid divisor messages
at boot time.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2012-11-09 17:03:55 -08:00
Tony Prisk 85814d69e6 arm: vt8500: clk: Add Common Clock Framework support
This patch adds common clock framework support for arch-vt8500.
Support for PLL and device clocks on VT8500, WM8505 and WM8650
are included.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Acked-by: Mike Turquette <mturquette@linaro.org>
2012-09-21 19:23:57 +12:00