Граф коммитов

57 Коммитов

Автор SHA1 Сообщение Дата
Takashi Iwai c000c4f1d9 ALSA: synth: Remove empty init and exit
For a sake of code simplification, remove the init and the exit
entries that do nothing.

Notes for readers: actually it's OK to remove *both* init and exit,
but not OK to remove the exit entry.  By removing only the exit while
keeping init, the module becomes permanently loaded; i.e. you cannot
unload it any longer!

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-08-03 16:11:53 +02:00
Takashi Iwai 76727c2c3b ASoC: Updates for v4.15
The biggest thing this release has been the conversion of the AC98 bus
 to the driver model, that's been a long time coming so thanks to Robert
 Jarzmik for his dedication there.  Due to there being some AC97 MFD
 there's a few fairly large changes in input and the MFD layer, mainly to
 the wm97xx driver.
 
 There's also some drivers/drm changes to support the new AMD Stoney
 platform, these are shared with the DRM subsystem and should be being
 merged via both.
 
 Within the subsystem the overwhelming bulk of the changes is in the
 Intel drivers which continue to need lots of cleanups and fixes, this
 release they've also gained support for their open source firmware.
 There's also some large changs in the core as Morimoto-san continues to
 mirror operations into the component level in preparation for conversion
 of drivers to that.
 
  - The AC97 bus has finally caught up with the driver model thanks to
    some dedicated and persistent work from Robert Jarzmik.
  - Continued work from Morimoto-san on moving us towards being able to
    use components for everything.
  - Lots of cleanups for the Intel platform code, including support for
    their open source audio firmware.
  - Support for scaling MCLK with sample rate in simple-card.
  - Support for AMD Stoney platform.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAloJhwMTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0KzbB/9tXryXYz3dnKVlm9rk+Cq0Xy4TrUNk
 WY+Il+Di1b6CQJbAm9GSacJxR+siupZCjGC5roHznj/AA2l0RuxJXpxG40Db8ZX+
 bDR7mIWtuTUJHazqXltafj9ydElRKVpOGPAi5YJhhW5bXQ3SR9fFy0D3mdcT02v4
 SyMExhOMz+mdnuBhbWx9kqJ9LPzCs0ow+R4uoRgAQxpFXPBGtq06sMkK86lGfsl/
 iRM36J6FIeIQQfSHG/dkkpoybVax43z4OH7G1IL2FOU7miwkjZh/TTh/xHTd86Mc
 OOuGu4hB+MjvccSOa9HSrOqFjxtkZipstwqYVWoYQcUoIVpcg0YRk7TG
 =5KBY
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v4.15

The biggest thing this release has been the conversion of the AC98 bus
to the driver model, that's been a long time coming so thanks to Robert
Jarzmik for his dedication there.  Due to there being some AC97 MFD
there's a few fairly large changes in input and the MFD layer, mainly to
the wm97xx driver.

There's also some drivers/drm changes to support the new AMD Stoney
platform, these are shared with the DRM subsystem and should be being
merged via both.

Within the subsystem the overwhelming bulk of the changes is in the
Intel drivers which continue to need lots of cleanups and fixes, this
release they've also gained support for their open source firmware.
There's also some large changs in the core as Morimoto-san continues to
mirror operations into the component level in preparation for conversion
of drivers to that.

 - The AC97 bus has finally caught up with the driver model thanks to
   some dedicated and persistent work from Robert Jarzmik.
 - Continued work from Morimoto-san on moving us towards being able to
   use components for everything.
 - Lots of cleanups for the Intel platform code, including support for
   their open source audio firmware.
 - Support for scaling MCLK with sample rate in simple-card.
 - Support for AMD Stoney platform.
2017-11-13 15:45:57 +01:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Kees Cook 08352b200b ALSA: emux: Convert timers to use timer_setup()
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-24 21:01:33 +02:00
Colin Ian King 41e4b7dc6e ALSA: emux: remove unused redundant variable p2
The variable p2 is being assigned but never used, it is redundant
and can be safely removed.  Cleans up clang warning: Value stored to
'p2' is never read.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-16 13:37:38 +02:00
Markus Elfring 64a591e67e ALSA: emux: Delete two error messages for a failed memory allocation in snd_emux_create_port()
Omit extra messages for a memory allocation failure in this function.

This issue was detected by using the Coccinelle software.

Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-10 17:55:13 +02:00
Markus Elfring fbc020b48c ALSA: emux: Adjust four checks for null pointers
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The script “checkpatch.pl” pointed information out like the following.

Comparison to NULL could be written !…

Thus fix affected source code places.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-10 17:55:12 +02:00
Markus Elfring 949a0c23de ALSA: emux: Improve a size determination in two functions
Replace the specification of data types by pointer dereferences
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-10 17:55:11 +02:00
Markus Elfring c997aabbd3 ALSA: emux: Adjust one function call together with a variable assignment
The script "checkpatch.pl" pointed information out like the following.

ERROR: do not use assignment in if condition

Thus fix the affected source code place.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-08-10 17:55:09 +02:00
Takashi Iwai f03293d8fc ALSA: Fix forgotten dependency fix for tristate OSS sequencer kconfig
In the commit 3d774d5ef0 ("ALSA: seq: Allow the tristate build of
OSS emulation") we changed CONFIG_SND_SEQUENCER_OSS to tristate, but a
couple of places were forgotten, namely, opl3 and emux Makefile.
These contain the line like
  snd-opl3-synth-$(CONFIG_SND_SEQUENCER_OSS) += opl3_oss.o
and this doesn't work any longer as expected because snd-opl3-synth
can be built-in while CONFIG_SND_SEQUENCER_OSS=m.

This patch fixes these places to build properly for the new kconfig
dependency.  In the end, we had to use ifneq() to satisfy the
requirement.  It's a bit ugly, but lesser evil.

Fixes: 3d774d5ef0 ("ALSA: seq: Allow the tristate build of OSS emulation")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-28 08:45:07 +02:00
Takashi Iwai 8272115578 ALSA: synth: Select snd-emux-synth explicitly
Instead of the non-standard way to enable the build of snd-emux-synth
module inside Makefile, rewrite Kconfig to select the item explicitly
from each driver (sbawe and emu10k1).  This is the standard way.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-09 22:10:06 +02:00
Takashi Iwai 3d774d5ef0 ALSA: seq: Allow the tristate build of OSS emulation
Currently OSS sequencer emulation is tied with ALSA sequencer core,
both are built in the same level; i.e. when CONFIG_SND_SEQUENCER=y,
the OSS sequencer emulation is also always built-in, even though the
functionality can be built as an individual module.

This patch changes the rule and allows users to build snd-seq-oss
module while others are built-in.  Essentially, it's just a few simple
changes in Kconfig and Makefile.  Some driver codes like opl3 need to
convert from the simple ifdef to IS_ENABLED().  But that's all.

You might wonder how about the dependency: right, it can be messy, but
it still works.  Since we rewrote the sequencer binding with the
standard bus, the driver can be bound at any time on demand.  So, the
synthesizer driver module can be loaded individually from the OSS
emulation core before/after it.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-09 22:09:45 +02:00
Dan Carpenter 5885615e44 ALSA: emux: stop if copy_from_user() fails
If we can't fill the "patch" struct because "count" is too small (it can
be as low as 4 bytes) or because copy_from_user() failed, then just
return instead of using unintialized data.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-31 16:23:52 +02:00
Kees Cook f93a1c9e5e ALSA: synth: use designated initializers
Prepare to mark sensitive kernel structures for randomization by making
sure they're using designated initializers. These were identified during
allyesconfig builds of x86, arm, and arm64, with most initializer fixes
extracted from grsecurity.

Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-12-28 16:06:16 +01:00
Julia Lawall 3643b46c38 ALSA: emux: constify nrpn_conv_table structures
The nrpn_conv_table structures are never modified, so declare them as
const.

Done with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-06 10:19:49 +01:00
Takashi Iwai 225db5762d ALSA: synth: Fix conflicting OSS device registration on AWE32
When OSS emulation is loaded on ISA SB AWE32 chip, we get now kernel
warnings like:
  WARNING: CPU: 0 PID: 2791 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x51/0x80()
  sysfs: cannot create duplicate filename '/devices/isa/sbawe.0/sound/card0/seq-oss-0-0'

It's because both emux synth and opl3 drivers try to register their
OSS device object with the same static index number 0.  This hasn't
been a big problem until the recent rewrite of device management code
(that exposes sysfs at the same time), but it's been an obvious bug.

This patch works around it just by using a different index number of
emux synth object.  There can be a more elegant way to fix, but it's
enough for now, as this code won't be touched so often, in anyway.

Reported-and-tested-by: Michael Shell <list1@michaelshell.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-05 16:55:09 +02:00
Takashi Iwai 52262b4a5d ALSA: emux: Fix/cleanup old ifdef CONFIG_PROC_FS
Build emux_proc.o and drop the unneeded ifdefs.
Replace the left CONFIG_PROC with the new CONFIG_SND_PROC_FS.

Along with this, fix the build of emux_oss.o in Makefile, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-05-29 07:58:11 +02:00
Takashi Iwai 1c94e65c66 ALSA: emux: Fix mutex deadlock in OSS emulation
The OSS emulation in synth-emux helper has a potential AB/BA deadlock
at the simultaneous closing and opening:

  close ->
    snd_seq_release() ->
      sne_seq_free_client() ->
        snd_seq_delete_all_ports(): takes client->ports_mutex ->
	  port_delete() ->
	    snd_emux_unuse(): takes emux->register_mutex

  open ->
    snd_seq_oss_open() ->
      snd_emux_open_seq_oss(): takes emux->register_mutex ->
        snd_seq_event_port_attach() ->
	  snd_seq_create_port(): takes client->ports_mutex

This patch addresses the deadlock by reducing the rance taking
emux->register_mutex in snd_emux_open_seq_oss().  The lock is needed
for the refcount handling, so move it locally.  The calls in
emux_seq.c are already with the mutex, thus they are replaced with the
version without mutex lock/unlock.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-28 17:45:45 +02:00
Takashi Iwai 07b0e5d49d ALSA: emux: Fix mutex deadlock at unloading
The emux-synth driver has a possible AB/BA mutex deadlock at unloading
the emu10k1 driver:

  snd_emux_free() ->
    snd_emux_detach_seq(): mutex_lock(&emu->register_mutex) ->
      snd_seq_delete_kernel_client() ->
        snd_seq_free_client(): mutex_lock(&register_mutex)

  snd_seq_release() ->
    snd_seq_free_client(): mutex_lock(&register_mutex) ->
      snd_seq_delete_all_ports() ->
        snd_emux_unuse(): mutex_lock(&emu->register_mutex)

Basically snd_emux_detach_seq() doesn't need a protection of
emu->register_mutex as it's already being unregistered.  So, we can
get rid of this for avoiding the deadlock.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-27 14:50:39 +02:00
Takashi Iwai 976412fbc9 ALSA: Include linux/uaccess.h and linux/bitopts.h instead of asm/*
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-28 17:25:07 +01:00
Takashi Iwai abd083526a ALSA: emux: Use setup_timer() and mod_timer()
No functional change, refactoring with the standard helpers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-19 11:41:13 +01:00
Markus Elfring b172e0aae6 ALSA: emux: Delete an unnecessary check before the function call "snd_sf_free"
The snd_sf_free() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-04 15:12:29 +01:00
Rickard Strandqvist 14577c2516 ALSA: synth: emux: soundfont.c: Cleaning up memory leak
There is a risk for memory leak in when something unexpected happens
and the function returns.

This was largely found by using a static code analysis program called cppcheck.

[fixed a typo of kfree() by tiwai]

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-01 14:33:09 +02:00
Paul Gortmaker d81a6d7176 sound: Add export.h for THIS_MODULE/EXPORT_SYMBOL where needed
These aren't modules, but they do make use of these macros, so
they will need export.h to get that definition.  Previously,
they got it via the implicit module.h inclusion.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:22 -04:00
Paul Gortmaker da155d5b40 sound: Add module.h to the previously silent sound users
Lots of sound drivers were getting module.h via the implicit presence
of it in <linux/device.h> but we are going to clean that up.  So
fix up those users now.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:21 -04:00
Ben Hutchings a254dba37c ALSA: emux: Add trivial compat ioctl handler
Reported-by: Carmen Cru <carmen.cru@belgacom.net>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-09-14 16:18:11 +02:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Uwe Kleine-König fbfecd3712 tree-wide: fix typos "couter" -> "counter"
This patch was generated by

	git grep -E -i -l 'couter' | xargs -r perl -p -i -e 's/couter/counter/'

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-04 15:39:51 +01:00
Michal Marek 0528c7494e ALSA: clean up the logic for building sequencer modules
Instead of mangling the CONFIG_* variables in the makefiles over and
over, set a few helper variables in Kconfig.

Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-29 11:49:42 +02:00
Takashi Iwai e0d2054fd3 Merge branch 'topic/misc' into for-linus 2009-03-24 00:35:50 +01:00
Takashi Iwai 42b0158bdb ALSA: emux - Add missing KERN_* prefix to printk
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-05 16:01:46 +01:00
Takashi Iwai 28b7e343ee ALSA: Remove superfluous hwdep ops
Remove NOP hwdep ops in sound drivers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-05 09:28:08 +01:00
Takashi Iwai 5e246b850d ALSA: Kill snd_assert() in other places
Kill snd_assert() in other places, either removed or replaced with
if () with snd_BUG_ON().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13 11:46:40 +02:00
maximilian attems bf91141d35 [ALSA] emux midi synthesizer doesn't honor SOFT_PEDAL-release event
When the hardware wavetable synthesizer of an Creative SB Audigy or SB
Live! card (with emu10k chip) receives the MIDI SOFT_PEADAL-press event
(?? 67 127) the appropriate voice is attenuted. Unfortunately when the
pedal is released (event ?? 67 0) the voice does not get it's original
volume again.

Boolean MIDI controls should interpret 0..63 as false and 64..127 as true.
Thanks to Clemens Ladisch for review and correction.

Original patch from "Uwe Kraeger" <uwe_debbug@arcor.de>
Submitted to http://bugs.debian.org/474312

Signed-off-by: maximilian attems <max@stro.at>
Cc: uwe_debbug@arcor.de
Cc: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-05-13 14:47:43 +02:00
Takashi Iwai 9004acc70e [ALSA] Remove sound/driver.h
This header file exists only for some hacks to adapt alsa-driver
tree.  It's useless for building in the kernel.  Let's move a few
lines in it to sound/core.h and remove it.
With this patch, sound/driver.h isn't removed but has just a single
compile warning to include it.  This should be really killed in
future.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:48 +01:00
Robert P. J. Day 3a4fa0a25d Fix misspellings of "system", "controller", "interrupt" and "necessary".
Fix the various misspellings of "system", controller", "interrupt" and
"[un]necessary".

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19 23:10:43 +02:00
Jaroslav Kysela c1017a4cdb [ALSA] Changed Jaroslav Kysela's e-mail from perex@suse.cz to perex@perex.cz
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2007-10-16 16:51:18 +02:00
Adrian Bunk 8e6c962cd3 [ALSA] sound/synth/util_mem.c: remove pointless check
The Coverity checker spotted that if anyone would call this function
with 'prev == NULL', he would still get an Oops a few lines below.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 15:58:15 +02:00
Tim Schmielau cd354f1ae7 [PATCH] remove many unneeded #includes of sched.h
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:54 -08:00
Takashi Iwai 746d4a02e6 [ALSA] Fix disconnection of proc interface
- Add the linked list to each proc entry to enable a single-shot
  disconnection (unregister)
- Deprecate snd_info_unregister(), use snd_info_free_entry()
- Removed NULL checks of snd_info_free_entry()

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23 10:36:48 +02:00
Eric Sesterhenn d20cad602f [ALSA] NULL pointer dereference in sound/synth/emux/soundfont.c
this is about coverity id #100.
It seems the if statement is negated, since the else branch calls
remove_info() with sflist->currsf as a parameter where it gets
dereferenced.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-06-22 21:34:05 +02:00
Clemens Ladisch 450047a78f [ALSA] add more sequencer port type information bits
Add four new information flags SNDRV_SEQ_PORT_TYPE_HARDWARE, _SOFTWARE,
_SYNTHESIZER, _PORT for sequencer ports.  This makes it easier for apps
like Rosegarden to make policy decisions based on the port type.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-06-22 21:33:18 +02:00
Clemens Ladisch c97f3dd854 [ALSA] fix port type bits
Fix the port information about non-MIDI messages that had wrong values
for some OPL3 and EmuX ports.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-06-22 21:33:17 +02:00
Takashi Iwai bf850204a7 [ALSA] Remove unneeded read/write_size fields in proc text ops
Remove unneeded read/write_size fields in proc text ops.
snd_info_set_text_ops() is fixed, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-06-22 21:33:09 +02:00
Takashi Iwai 95ff17564b [ALSA] emux - Move EXPORT_SYMBOL() to adjacent to each function
Move EXPORT_SYMBOL() to adjacent to each exported function/variable.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-06-22 21:33:00 +02:00
Ingo Molnar ef9f0a42db [ALSA] semaphore -> mutex (driver part)
Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-03-22 10:24:57 +01:00
Clemens Ladisch 7b6d92451a [ALSA] seq: set client name in snd_seq_create_kernel_client()
All users of snd_seq_create_kernel_client() have to set the client name
anyway, so we can just pass the name as parameter.  This relieves us
from having to muck around with a struct snd_seq_client_info in these
cases.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-01-03 12:30:49 +01:00
Clemens Ladisch 83e8ad6984 [ALSA] seq: remove struct snd_seq_client_callback
The fields of struct snd_seq_client_callback either aren't used or are
always set to the same value, so we can get rid of it altogether.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
2006-01-03 12:30:47 +01:00
Takashi Iwai b32425ac93 [ALSA] Fix possible races in timer callbacks
Fix possible races in timer callbacks.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-01-03 12:29:08 +01:00
Takashi Iwai 03da312ac0 [ALSA] Remove xxx_t typedefs: Emu-X synth
Modules: Common EMU synth,SoundFont,Synth

Remove xxx_t typedefs from the Emu-X synth support.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-01-03 12:18:14 +01:00