[ Upstream commit b2f11c6f3e1fc60742673b8675c95b78447f3dae ]
If we need to increase the tree depth, allocate a new node, and then
race with another thread that increased the tree depth before us, we'll
still have a preallocated node that might be used later.
If we then use that node for a new non-root node, it'll still have a
pointer to the old root instead of being zeroed - fix this by zeroing it
in the cmpxchg failure path.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b739dffa5d570b411d4bdf4bb9b8dfd6b7d72305 ]
When of_irq_parse_raw() is invoked with a device address smaller than
the interrupt parent node (from #address-cells property), KASAN detects
the following out-of-bounds read when populating the initial match table
(dyndbg="func of_irq_parse_* +p"):
OF: of_irq_parse_one: dev=/soc@0/picasso/watchdog, index=0
OF: parent=/soc@0/pci@878000000000/gpio0@17,0, intsize=2
OF: intspec=4
OF: of_irq_parse_raw: ipar=/soc@0/pci@878000000000/gpio0@17,0, size=2
OF: -> addrsize=3
==================================================================
BUG: KASAN: slab-out-of-bounds in of_irq_parse_raw+0x2b8/0x8d0
Read of size 4 at addr ffffff81beca5608 by task bash/764
CPU: 1 PID: 764 Comm: bash Tainted: G O 6.1.67-484c613561-nokia_sm_arm64 #1
Hardware name: Unknown Unknown Product/Unknown Product, BIOS 2023.01-12.24.03-dirty 01/01/2023
Call trace:
dump_backtrace+0xdc/0x130
show_stack+0x1c/0x30
dump_stack_lvl+0x6c/0x84
print_report+0x150/0x448
kasan_report+0x98/0x140
__asan_load4+0x78/0xa0
of_irq_parse_raw+0x2b8/0x8d0
of_irq_parse_one+0x24c/0x270
parse_interrupts+0xc0/0x120
of_fwnode_add_links+0x100/0x2d0
fw_devlink_parse_fwtree+0x64/0xc0
device_add+0xb38/0xc30
of_device_add+0x64/0x90
of_platform_device_create_pdata+0xd0/0x170
of_platform_bus_create+0x244/0x600
of_platform_notify+0x1b0/0x254
blocking_notifier_call_chain+0x9c/0xd0
__of_changeset_entry_notify+0x1b8/0x230
__of_changeset_apply_notify+0x54/0xe4
of_overlay_fdt_apply+0xc04/0xd94
...
The buggy address belongs to the object at ffffff81beca5600
which belongs to the cache kmalloc-128 of size 128
The buggy address is located 8 bytes inside of
128-byte region [ffffff81beca5600, ffffff81beca5680)
The buggy address belongs to the physical page:
page:00000000230d3d03 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1beca4
head:00000000230d3d03 order:1 compound_mapcount:0 compound_pincount:0
flags: 0x8000000000010200(slab|head|zone=2)
raw: 8000000000010200 0000000000000000 dead000000000122 ffffff810000c300
raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffffff81beca5500: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffff81beca5580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffffff81beca5600: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffffff81beca5680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffff81beca5700: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc
==================================================================
OF: -> got it !
Prevent the out-of-bounds read by copying the device address into a
buffer of sufficient size.
Signed-off-by: Stefan Wiehler <stefan.wiehler@nokia.com>
Link: https://lore.kernel.org/r/20240812100652.3800963-1-stefan.wiehler@nokia.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 810ee43d9cd245d138a2733d87a24858a23f577d ]
Syzkiller reports a "KMSAN: uninit-value in pick_link" bug.
This is caused by an uninitialised page, which is ultimately caused
by a corrupted symbolic link size read from disk.
The reason why the corrupted symlink size causes an uninitialised
page is due to the following sequence of events:
1. squashfs_read_inode() is called to read the symbolic
link from disk. This assigns the corrupted value
3875536935 to inode->i_size.
2. Later squashfs_symlink_read_folio() is called, which assigns
this corrupted value to the length variable, which being a
signed int, overflows producing a negative number.
3. The following loop that fills in the page contents checks that
the copied bytes is less than length, which being negative means
the loop is skipped, producing an uninitialised page.
This patch adds a sanity check which checks that the symbolic
link size is not larger than expected.
--
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Link: https://lore.kernel.org/r/20240811232821.13903-1-phillip@squashfs.org.uk
Reported-by: Lizhi Xu <lizhi.xu@windriver.com>
Reported-by: syzbot+24ac24ff58dc5b0d26b9@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000a90e8c061e86a76b@google.com/
V2: fix spelling mistake.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5876b088ba03a62124266fa20d00e65533c7269 ]
ipheth_sndbulk_callback() can submit carrier_work
as a part of its error handling. That means that
the driver must make sure that the work is cancelled
after it has made sure that no more URB can terminate
with an error condition.
Hence the order of actions in ipheth_close() needs
to be inverted.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Foster Snowhill <forst@pen.gy>
Tested-by: Georgi Valkov <gvalkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 206f533a0a7c683982af473079c4111f4a0f9f5e ]
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When exercising uinput interface syzkaller may try setting up device
with a really large number of slots, which causes memory allocation
failure in input_mt_init_slots(). While this allocation failure is
handled properly and request is rejected, it results in syzkaller
reports. Additionally, such request may put undue burden on the
system which will try to free a lot of memory for a bogus request.
Fix it by limiting allowed number of slots to 100. This can easily
be extended if we see devices that can track more than 100 contacts.
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+0122fa359a69694395d5@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=0122fa359a69694395d5
Link: https://lore.kernel.org/r/Zqgi7NYEbpRsJfa2@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6e9c391d45b5865b61e569146304cff72821a5d ]
report_fixup for the Cougar 500k Gaming Keyboard was not verifying
that the report descriptor size was correct before accessing it
Reported-by: syzbot+24c0361074799d02c452@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=24c0361074799d02c452
Signed-off-by: Camila Alvarez <cam.alvarez.i@gmail.com>
Reviewed-by: Silvan Jegen <s.jegen@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8e947e9f64cac9df85a07672b658df5b2bcff07 ]
Some arch + compiler combinations report a potentially unused variable
location in btrfs_lookup_dentry(). This is a false alert as the variable
is passed by value and always valid or there's an error. The compilers
cannot probably reason about that although btrfs_inode_by_name() is in
the same file.
> + /kisskb/src/fs/btrfs/inode.c: error: 'location.objectid' may be used
+uninitialized in this function [-Werror=maybe-uninitialized]: => 5603:9
> + /kisskb/src/fs/btrfs/inode.c: error: 'location.type' may be used
+uninitialized in this function [-Werror=maybe-uninitialized]: => 5674:5
m68k-gcc8/m68k-allmodconfig
mips-gcc8/mips-allmodconfig
powerpc-gcc5/powerpc-all{mod,yes}config
powerpc-gcc5/ppc64_defconfig
Initialize it to zero, this should fix the warnings and won't change the
behaviour as btrfs_inode_by_name() accepts only a root or inode item
types, otherwise returns an error.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/linux-btrfs/bd4e9928-17b3-9257-8ba7-6b7f9bbb639a@linux-m68k.org/
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 291e4baf70019f17a81b7b47aeb186b27d222159 ]
Even if a vgem device is configured in, we will skip the import_vgem_fd()
test almost every time.
TAP version 13
1..11
# Testing heap: system
# =======================================
# Testing allocation and importing:
ok 1 # SKIP Could not open vgem -1
The problem is that we use the DRM_IOCTL_VERSION ioctl to query the driver
version information but leave the name field a non-null-terminated string.
Terminate it properly to actually test against the vgem device.
While at it, let's check the length of the driver name is exactly 4 bytes
and return early otherwise (in case there is a name like "vgemfoo" that
gets converted to "vgem\0" unexpectedly).
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240729024604.2046-1-yuzenghui@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a2be2f1db268ec735419e53ef04ca039fc027dc ]
Definitely condition dma_get_cache_alignment * defined value > 256
during driver initialization is not reason to BUG_ON(). Turn that to
graceful error out with -EINVAL.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20240628131559.502822-3-jarkko.nikula@linux.intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 555a05d84ca2c587e2d4777006e2c2fb3dfbd91d ]
The dpaa-eth driver is written for PowerPC and Arm SoCs which have 1-24
CPUs. It depends on CONFIG_NR_CPUS having a reasonably small value in
Kconfig. Otherwise, there are 2 functions which allocate on-stack arrays
of NR_CPUS elements, and these can quickly explode in size, leading to
warnings such as:
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:3280:12: warning:
stack frame size (16664) exceeds limit (2048) in 'dpaa_eth_probe' [-Wframe-larger-than]
The problem is twofold:
- Reducing the array size to the boot-time num_possible_cpus() (rather
than the compile-time NR_CPUS) creates a variable-length array,
which should be avoided in the Linux kernel.
- Using NR_CPUS as an array size makes the driver blow up in stack
consumption with generic, as opposed to hand-crafted, .config files.
A simple solution is to use dynamic allocation for num_possible_cpus()
elements (aka a small number determined at runtime).
Link: https://lore.kernel.org/all/202406261920.l5pzM1rj-lkp@intel.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://patch.msgid.link/20240713225336.1746343-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4e772898f8bf2e7e1cf661a12c60a5612c4afab ]
One of the true positives that the cfg_access_lock lockdep effort
identified is this sequence:
WARNING: CPU: 14 PID: 1 at drivers/pci/pci.c:4886 pci_bridge_secondary_bus_reset+0x5d/0x70
RIP: 0010:pci_bridge_secondary_bus_reset+0x5d/0x70
Call Trace:
<TASK>
? __warn+0x8c/0x190
? pci_bridge_secondary_bus_reset+0x5d/0x70
? report_bug+0x1f8/0x200
? handle_bug+0x3c/0x70
? exc_invalid_op+0x18/0x70
? asm_exc_invalid_op+0x1a/0x20
? pci_bridge_secondary_bus_reset+0x5d/0x70
pci_reset_bus+0x1d8/0x270
vmd_probe+0x778/0xa10
pci_device_probe+0x95/0x120
Where pci_reset_bus() users are triggering unlocked secondary bus resets.
Ironically pci_bus_reset(), several calls down from pci_reset_bus(), uses
pci_bus_lock() before issuing the reset which locks everything *but* the
bridge itself.
For the same motivation as adding:
bridge = pci_upstream_bridge(dev);
if (bridge)
pci_dev_lock(bridge);
to pci_reset_function() for the "bus" and "cxl_bus" reset cases, add
pci_dev_lock() for @bus->self to pci_bus_lock().
Link: https://lore.kernel.org/r/171711747501.1628941.15217746952476635316.stgit@dwillia2-xfh.jf.intel.com
Reported-by: Imre Deak <imre.deak@intel.com>
Closes: http://lore.kernel.org/r/6657833b3b5ae_14984b29437@dwillia2-xfh.jf.intel.com.notmuch
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
[bhelgaas: squash in recursive locking deadlock fix from Keith Busch:
https://lore.kernel.org/r/20240711193650.701834-1-kbusch@meta.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Kalle Valo <kvalo@kernel.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ad8735994b854b23c824dd6b1dd2126e893a3b4 ]
The exception vector of the booting hart is not set before enabling
the mmu and then still points to the value of the previous firmware,
typically _start. That makes it hard to debug setup_vm() when bad
things happen. So fix that by setting the exception vector earlier.
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: yang.zhang <yang.zhang@hexintek.com>
Link: https://lore.kernel.org/r/20240508022445.6131-1-gaoshanliukou@163.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b56329a782314fde5b61058e2a25097af7ccb675 ]
Instead of a BUG_ON() just return an error, log an error message and
abort the transaction in case we find an extent buffer belonging to the
relocation tree that doesn't have the full backref flag set. This is
unexpected and should never happen (save for bugs or a potential bad
memory).
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8ccef048354074a548f108e51d0557d6adfd3a3 ]
In reada we BUG_ON(refs == 0), which could be unkind since we aren't
holding a lock on the extent leaf and thus could get a transient
incorrect answer. In walk_down_proc we also BUG_ON(refs == 0), which
could happen if we have extent tree corruption. Change that to return
-EUCLEAN. In do_walk_down() we catch this case and handle it correctly,
however we return -EIO, which -EUCLEAN is a more appropriate error code.
Finally in walk_up_proc we have the same BUG_ON(refs == 0), so convert
that to proper error handling. Also adjust the error message so we can
actually do something with the information.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f9d44c0a12730a24f8bb75c5e1102207413cc9b ]
We have a couple of areas where we check to make sure the tree block is
locked before looking up or messing with references. This is old code
so it has this as BUG_ON(). Convert this to ASSERT() for developers.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 744375343662058cbfda96d871786e5a5cbe1947 ]
Mark ntfs dirty in this case.
Rename ntfs_filldir to ntfs_dir_emit.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77aeb1b685f9db73d276bad4bb30d48505a6fd23 ]
For CONFIG_DEBUG_OBJECTS_WORK=y kernels sscs.work defined by
INIT_WORK_ONSTACK() is initialized by debug_object_init_on_stack() for
the debug check in __init_work() to work correctly.
But this lacks the counterpart to remove the tracked object from debug
objects again, which will cause a debug object warning once the stack is
freed.
Add the missing destroy_work_on_stack() invocation to cure that.
[ tglx: Massaged changelog ]
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20240704065213.13559-1-qiang.zhang1211@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54624acf8843375a6de3717ac18df3b5104c39c5 ]
The test thread will start N benchmark kthreads and then schedule out
until the test time finished and notify the benchmark kthreads to stop.
The benchmark kthreads will keep running until notified to stop.
There's a problem with current implementation when the benchmark
kthreads number is equal to the CPUs on a non-preemptible kernel:
since the scheduler will balance the kthreads across the CPUs and
when the test time's out the test thread won't get a chance to be
scheduled on any CPU then cannot notify the benchmark kthreads to stop.
This can be easily reproduced on a VM (simulated with 16 CPUs) with
PREEMPT_VOLUNTARY:
estuary:/mnt$ ./dma_map_benchmark -t 16 -s 1
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 10-...!: (5221 ticks this GP) idle=ed24/1/0x4000000000000000 softirq=142/142 fqs=0
rcu: (t=5254 jiffies g=-559 q=45 ncpus=16)
rcu: rcu_sched kthread starved for 5255 jiffies! g-559 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=12
rcu: Unless rcu_sched kthread gets sufficient CPU time, OOM is now expected behavior.
rcu: RCU grace-period kthread stack dump:
task:rcu_sched state:R running task stack:0 pid:16 tgid:16 ppid:2 flags:0x00000008
Call trace
__switch_to+0xec/0x138
__schedule+0x2f8/0x1080
schedule+0x30/0x130
schedule_timeout+0xa0/0x188
rcu_gp_fqs_loop+0x128/0x528
rcu_gp_kthread+0x1c8/0x208
kthread+0xec/0xf8
ret_from_fork+0x10/0x20
Sending NMI from CPU 10 to CPUs 0:
NMI backtrace for cpu 0
CPU: 0 PID: 332 Comm: dma-map-benchma Not tainted 6.10.0-rc1-vanilla-LSE #8
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : arm_smmu_cmdq_issue_cmdlist+0x218/0x730
lr : arm_smmu_cmdq_issue_cmdlist+0x488/0x730
sp : ffff80008748b630
x29: ffff80008748b630 x28: 0000000000000000 x27: ffff80008748b780
x26: 0000000000000000 x25: 000000000000bc70 x24: 000000000001bc70
x23: ffff0000c12af080 x22: 0000000000010000 x21: 000000000000ffff
x20: ffff80008748b700 x19: ffff0000c12af0c0 x18: 0000000000010000
x17: 0000000000000001 x16: 0000000000000040 x15: ffffffffffffffff
x14: 0001ffffffffffff x13: 000000000000ffff x12: 00000000000002f1
x11: 000000000001ffff x10: 0000000000000031 x9 : ffff800080b6b0b8
x8 : ffff0000c2a48000 x7 : 000000000001bc71 x6 : 0001800000000000
x5 : 00000000000002f1 x4 : 01ffffffffffffff x3 : 000000000009aaf1
x2 : 0000000000000018 x1 : 000000000000000f x0 : ffff0000c12af18c
Call trace:
arm_smmu_cmdq_issue_cmdlist+0x218/0x730
__arm_smmu_tlb_inv_range+0xe0/0x1a8
arm_smmu_iotlb_sync+0xc0/0x128
__iommu_dma_unmap+0x248/0x320
iommu_dma_unmap_page+0x5c/0xe8
dma_unmap_page_attrs+0x38/0x1d0
map_benchmark_thread+0x118/0x2c0
kthread+0xec/0xf8
ret_from_fork+0x10/0x20
Solve this by adding scheduling point in the kthread loop,
so if there're other threads in the system they may have
a chance to run, especially the thread to notify the test
end. However this may degrade the test concurrency so it's
recommended to run this on an idle system.
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Barry Song <baohua@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63469662cc45d41705f14b4648481d5d29cf5999 ]
In the fast commit code there are a few places where tid_t variables are
being compared without taking into account the fact that these sequence
numbers may wrap. Fix this issue by using the helper functions tid_gt()
and tid_geq().
Signed-off-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://patch.msgid.link/20240529092030.9557-3-luis.henriques@linux.dev
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33f23fc3155b13c4a96d94a0a22dc26db767440b ]
[Why]
If VF request full GPU access and the request failed,
the VF driver can get stuck accessing registers for an extended period during
the unload of KMS.
[How]
Set no_hw_access flag when VF request for full GPU access fails
This prevents further hardware access attempts, avoiding the prolonged
stuck state.
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cedc12c5b57f7efa6dbebfb2b140e8675f5a2616 ]
In the current state, an erroneous call to
bpf_object__find_map_by_name(NULL, ...) leads to a segmentation
fault through the following call chain:
bpf_object__find_map_by_name(obj = NULL, ...)
-> bpf_object__for_each_map(pos, obj = NULL)
-> bpf_object__next_map((obj = NULL), NULL)
-> return (obj = NULL)->maps
While calling bpf_object__find_map_by_name with obj = NULL is
obviously incorrect, this should not lead to a segmentation
fault but rather be handled gracefully.
As __bpf_map__iter already handles this situation correctly, we
can delegate the check for the regular case there and only add
a check in case the prev or next parameter is NULL.
Signed-off-by: Andreas Ziegler <ziegler.andreas@siemens.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240703083436.505124-1-ziegler.andreas@siemens.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c1de37969b7bc0abcb20b86e91e70caebbd4f89 ]
DIV_ROUND_CLOSEST() after kstrtol() results in an underflow if a large
negative number such as -9223372036854775808 is provided by the user.
Fix it by reordering clamp_val() and DIV_ROUND_CLOSEST() operations.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0403e10bf0824bf0ec2bb135d4cf1c0cc3bf4bf0 ]
DIV_ROUND_CLOSEST() after kstrtol() results in an underflow if a large
negative number such as -9223372036854775808 is provided by the user.
Fix it by reordering clamp_val() and DIV_ROUND_CLOSEST() operations.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af64e3e1537896337405f880c1e9ac1f8c0c6198 ]
DIV_ROUND_CLOSEST() after kstrtol() results in an underflow if a large
negative number such as -9223372036854775808 is provided by the user.
Fix it by reordering clamp_val() and DIV_ROUND_CLOSEST() operations.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8cad724c8537fe3e0da8004646abc00290adae40 ]
DIV_ROUND_CLOSEST() after kstrtol() results in an underflow if a large
negative number such as -9223372036854775808 is provided by the user.
Fix it by reordering clamp_val() and DIV_ROUND_CLOSEST() operations.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 335e35b748527f0c06ded9eebb65387f60647fda ]
The hotplug driver for powerpc (pci/hotplug/pnv_php.c) causes a kernel
crash when we try to hot-unplug/disable the PCIe switch/bridge from
the PHB.
The crash occurs because although the MSI data structure has been
released during disable/hot-unplug path and it has been assigned
with NULL, still during unregistration the code was again trying to
explicitly disable the MSI which causes the NULL pointer dereference and
kernel crash.
The patch fixes the check during unregistration path to prevent invoking
pci_disable_msi/msix() since its data structure is already freed.
Reported-by: Timothy Pearson <tpearson@raptorengineering.com>
Closes: https://lore.kernel.org/all/1981605666.2142272.1703742465927.JavaMail.zimbra@raptorengineeringinc.com/
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Signed-off-by: Krishna Kumar <krishnak@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240701074513.94873-2-krishnak@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 824ac4a5edd3f7494ab1996826c4f47f8ef0f63d ]
The pointer isn't initialized by callers, but I have
encountered cases where it's still printed; initialize
it in all possible cases in setup_one_line().
Link: https://patch.msgid.link/20240703172235.ad863568b55f.Iaa1eba4db8265d7715ba71d5f6bb8c7ff63d27e9@changeid
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57b56d16800e8961278ecff0dc755d46c4575092 ]
The writing of css->cgroup associated with the cgroup root in
rebind_subsystems() is currently protected only by cgroup_mutex.
However, the reading of css->cgroup in both proc_cpuset_show() and
proc_cgroup_show() is protected just by css_set_lock. That makes the
readers susceptible to racing problems like data tearing or caching.
It is also a problem that can be reported by KCSAN.
This can be fixed by using READ_ONCE() and WRITE_ONCE() to access
css->cgroup. Alternatively, the writing of css->cgroup can be moved
under css_set_lock as well which is done by this patch.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5e86a95541cea737394a1da967df4cd4d8f7182 ]
Queued invalidation wait descriptor status is volatile in that IOMMU
hardware writes the data upon completion.
Use READ_ONCE() to prevent compiler optimizations which ensures memory
reads every time. As a side effect, READ_ONCE() also enforces strict
types and may add an extra instruction. But it should not have negative
performance impact since we use cpu_relax anyway and the extra time(by
adding an instruction) may allow IOMMU HW request cacheline ownership
easier.
e.g. gcc 12.3
BEFORE:
81 38 ad de 00 00 cmpl $0x2,(%rax)
AFTER (with READ_ONCE())
772f: 8b 00 mov (%rax),%eax
7731: 3d ad de 00 00 cmp $0x2,%eax
//status data is 32 bit
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20240607173817.3914600-1-jacob.jun.pan@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20240702130839.108139-2-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 140ce37fd78a629105377e17842465258a5459ef ]
dm_parse_device_entry() simply copies the minor number into dmi.dev, but
the dev_t format splits the minor number between the lowest 8 bytes and
highest 12 bytes. If the minor number is larger than 255, part of it
will end up getting treated as the major number
Fix this by checking that the minor number is valid and then encoding it
as a dev_t.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bee2ef946d3184e99077be526567d791c473036f ]
When userspace wants to take over a fdb entry by setting it as
EXTERN_LEARNED, we set both flags BR_FDB_ADDED_BY_EXT_LEARN and
BR_FDB_ADDED_BY_USER in br_fdb_external_learn_add().
If the bridge updates the entry later because its port changed, we clear
the BR_FDB_ADDED_BY_EXT_LEARN flag, but leave the BR_FDB_ADDED_BY_USER
flag set.
If userspace then wants to take over the entry again,
br_fdb_external_learn_add() sees that BR_FDB_ADDED_BY_USER and skips
setting the BR_FDB_ADDED_BY_EXT_LEARN flags, thus silently ignores the
update.
Fix this by always allowing to set BR_FDB_ADDED_BY_EXT_LEARN regardless
if this was a user fdb entry or not.
Fixes: 710ae72877 ("net: bridge: Mark FDB entries that were added by user as such")
Signed-off-by: Jonas Gorski <jonas.gorski@bisdn.de>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20240903081958.29951-1-jonas.gorski@bisdn.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 627b94f75b ]
All gro_complete() handlers are called from napi_gro_complete()
while rcu_read_lock() has been called.
There is no point stacking more rcu_read_lock()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 7e4196935069 ("fou: Fix null-ptr-deref in GRO.")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc1ca3348a ]
All gro_receive() handlers are called from dev_gro_receive()
while rcu_read_lock() has been called.
There is no point stacking more rcu_read_lock()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 7e4196935069 ("fou: Fix null-ptr-deref in GRO.")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bab8eb0dd4cb995caa4a0529d5655531c2ec5e8e ]
The driver generates a random MAC once on load
and uses it over and over, including on two devices
needing a random MAC at the same time.
Jakub suggested revamping the driver to the modern
API for setting a random MAC rather than fixing
the old stuff.
The bug is as old as the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://patch.msgid.link/20240829175201.670718-1-oneukum@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2674e7ea22 ]
Commit 406f42fa0d ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.
Manually fix all net/usb drivers without separate maintainers.
v2: catc does DMA to the buffer, leave the conversion to Oliver
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: bab8eb0dd4cb ("usbnet: modern method to get random MAC")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8c40b9d3a6cef61eb5a0c58c34a3090ea938d89 ]
Consider the following scenario:
.ndo_bpf() | ice_prepare_for_reset() |
________________________|_______________________________________|
rtnl_lock() | |
ice_down() | |
| test_bit(ICE_VSI_DOWN) - true |
| ice_dis_vsi() returns |
ice_up() | |
| proceeds to rebuild a running VSI |
.ndo_bpf() is not the only rtnl-locked callback that toggles the interface
to apply new configuration. Another example is .set_channels().
To avoid the race condition above, act only after reading ICE_VSI_DOWN
under rtnl_lock.
Fixes: 0f9d5027a7 ("ice: Refactor VSI allocation, deletion and rebuild flow")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef4a99a0164e3972abb421cbb1b09ea6c61414df ]
Call rtnl_unlock() on this error path, before returning.
Fixes: bc23aa949a ("igc: Add pcie error handler support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ffc17e1479e8e9459b7afa80e5d9d40d0dd78abb ]
In case of error in build_tokens_sysfs(), all the memory that has been
allocated is freed at end of this function. But then free_group() is
called which performs memory deallocation again.
Also, instead of free_group() call, there should be exit_dell_smbios_smm()
and exit_dell_smbios_wmi() calls, since there is initialization, but there
is no release of resources in case of an error.
Fix these issues by replacing free_group() call with
exit_dell_smbios_wmi() and exit_dell_smbios_smm().
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 33b9ca1e53 ("platform/x86: dell-smbios: Add a sysfs interface for SMBIOS tokens")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Link: https://lore.kernel.org/r/20240830065428.9544-1-amishin@t-argos.ru
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba8cf80724dbc09825b52498e4efacb563935408 ]
82580 NICs have a hardware bug that makes it
necessary to write into the TSICR (TimeSync Interrupt Cause) register
to clear it:
https://lore.kernel.org/all/CDCB8BE0.1EC2C%25matthew.vick@intel.com/
Add a conditional so only for 82580 we write into the TSICR register,
so we don't risk losing events for other models.
Without this change, when running ptp4l with an Intel 82580 card,
I get the following output:
> timed out while polling for tx timestamp increasing tx_timestamp_timeout or
> increasing kworker priority may correct this issue, but a driver bug likely
> causes it
This goes away with this change.
This (partially) reverts commit ee14cc9ea19b ("igb: Fix missing time sync events").
Fixes: ee14cc9ea19b ("igb: Fix missing time sync events")
Closes: https://lore.kernel.org/intel-wired-lan/CAN0jFd1kO0MMtOh8N2Ztxn6f7vvDKp2h507sMryobkBKe=xk=w@mail.gmail.com/
Tested-by: Daiwei Li <daiweili@google.com>
Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Daiwei Li <daiweili@google.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06d4ef3056a7ac31be331281bb7a6302ef5a7f8a ]
It appears that the irq requested in m_can_open() may be leaked
if an error subsequently occurs: if m_can_start() fails.
Address this by calling free_irq in the unwind path for
such cases.
Flagged by Smatch.
Compile tested only.
Fixes: eaacfeaca7 ("can: m_can: Call the RAM init directly from m_can_chip_config")
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/all/20240805-mcan-irq-v2-1-7154c0484819@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kent Overstreet
Stefan Wiehler
Phillip Lougher
Oliver Neukum
Dmitry Torokhov
Olivier Sobrie
Camila Alvarez
Heiko Carstens
David Sterba
Zenghui Yu
Jarkko Nikula
Vladimir Oltean
Dan Williams
yang.zhang
Filipe Manana
Josef Bacik
Konstantin Komarov
Zqiang
Sascha Hauer
Yicong Yang
Luis Henriques (SUSE)
Yifan Zha
Andreas Ziegler
Guenter Roeck
Krishna Kumar
Zijun Hu
Johannes Berg
Waiman Long
Jacob Pan
Benjamin Marzinski
Amadeusz Sławiński
Pawel Dembicki
Jonas Gorski
Kuniyuki Iwashima
Eric Dumazet
Guillaume Nault
Jakub Kicinski
Larysa Zaremba
Dan Carpenter
Cong Wang
Aleksandr Mishin
Daiwei Li
Simon Horman