[ Upstream commit 969a26446b ]
Before this commit the kernel could end up with no trusted key sources
even though both of the currently supported backends (TPM and TEE) were
compiled as modules. This manifested in the trusted key type not being
registered at all.
When checking if a CONFIG_… preprocessor variable is defined we only
test for the builtin (=y) case and not the module (=m) case. By using
the IS_REACHABLE() macro we do test for both cases.
Fixes: 5d0682be31 ("KEYS: trusted: Add generic trusted keys framework")
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Andreas Rammhold <andreas@rammhold.de>
Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 614c0b9fee ]
We may call arm64_apply_bp_hardening() early during entry (e.g. in
el0_ia()) before it is safe to run instrumented code. Unfortunately this
may result in running instrumented code in two cases:
* The hardening callbacks called by arm64_apply_bp_hardening() are not
marked as `noinstr`, and have been observed to be instrumented when
compiled with either GCC or LLVM.
* Since arm64_apply_bp_hardening() itself is only marked as `inline`
rather than `__always_inline`, it is possible that the compiler
decides to place it out-of-line, whereupon it may be instrumented.
For example, with defconfig built with clang 13.0.0,
call_hvc_arch_workaround_1() is compiled as:
| <call_hvc_arch_workaround_1>:
| d503233f paciasp
| f81f0ffe str x30, [sp, #-16]!
| 320183e0 mov w0, #0x80008000
| d503201f nop
| d4000002 hvc #0x0
| f84107fe ldr x30, [sp], #16
| d50323bf autiasp
| d65f03c0 ret
... but when CONFIG_FTRACE=y and CONFIG_KCOV=y this is compiled as:
| <call_hvc_arch_workaround_1>:
| d503245f bti c
| d503201f nop
| d503201f nop
| d503233f paciasp
| a9bf7bfd stp x29, x30, [sp, #-16]!
| 910003fd mov x29, sp
| 94000000 bl 0 <__sanitizer_cov_trace_pc>
| 320183e0 mov w0, #0x80008000
| d503201f nop
| d4000002 hvc #0x0
| a8c17bfd ldp x29, x30, [sp], #16
| d50323bf autiasp
| d65f03c0 ret
... with a patchable function entry registered with ftrace, and a direct
call to __sanitizer_cov_trace_pc(). Neither of these are safe early
during entry sequences.
This patch avoids the unsafe instrumentation by marking
arm64_apply_bp_hardening() as `__always_inline` and by marking the
hardening functions as `noinstr`. This avoids the potential for
instrumentation, and causes clang to consistently generate the function
as with the defconfig sample.
Note: in the defconfig compilation, when CONFIG_SVE=y, x30 is spilled to
the stack without being placed in a frame record, which will result in a
missing entry if call_hvc_arch_workaround_1() is backtraced. Similar is
true of qcom_link_stack_sanitisation(), where inline asm spills the LR
to a GPR prior to corrupting it. This is not a significant issue
presently as we will only backtrace here if an exception is taken, and
in such cases we may omit entries for other reasons today.
The relevant hardening functions were introduced in commits:
ec82b567a7 ("arm64: Implement branch predictor hardening for Falkor")
b092201e00 ("arm64: Add ARM_SMCCC_ARCH_WORKAROUND_1 BP hardening support")
... and these were subsequently moved in commit:
d4647f0a2a ("arm64: Rewrite Spectre-v2 mitigation code")
The arm64_apply_bp_hardening() function was introduced in commit:
0f15adbb28 ("arm64: Add skeleton to harden the branch predictor against aliasing attacks")
... and was subsequently moved and reworked in commit:
6279017e80 ("KVM: arm64: Move BP hardening helpers into spectre.h")
Fixes: ec82b567a7 ("arm64: Implement branch predictor hardening for Falkor")
Fixes: b092201e00 ("arm64: Add ARM_SMCCC_ARCH_WORKAROUND_1 BP hardening support")
Fixes: d4647f0a2a ("arm64: Rewrite Spectre-v2 mitigation code")
Fixes: 0f15adbb28 ("arm64: Add skeleton to harden the branch predictor against aliasing attacks")
Fixes: 6279017e80 ("KVM: arm64: Move BP hardening helpers into spectre.h")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220224181028.512873-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4467b8bad2 ]
of_base->base can either be iomapped using of_io_request_and_map() or
of_iomap() depending whether or not an of_base->name has been set.
Thus check of_base->base against NULL as of_iomap() does not return a
PTR_ERR() in case of error.
Fixes: 9aea417afa ("clocksource/drivers/timer-of: Don't request the resource by name")
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Link: https://lore.kernel.org/r/20220307172656.4836-1-granquet@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab8da93dc0 ]
The driver statically defines maximum number of interrupts it can
handle, however it does not respect that limit when configuring them.
When provided with a DTS with more interrupts than assumed, the driver
will overwrite static array mct_irqs leading to silent memory
corruption.
Validate the interrupts coming from DTS to avoid this. This does not
change the fact that such DTS might not boot at all, because it is
simply incompatible, however at least some warning will be printed.
Fixes: 36ba5d527e ("ARM: EXYNOS: add device tree support for MCT controller driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20220220103815.135380-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7cd925a882 ]
Move interrupts allocation from exynos4_timer_resources() into separate
function together with the interrupt number parsing code from
mct_init_dt(), so the code for managing interrupts is kept together.
While touching exynos4_timer_resources() function, move of_iomap() to it.
No functional changes.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20211101193531.15078-2-semen.protsenko@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 647d41d395 ]
vmx-crypto module depends on CRYPTO_AES, CRYPTO_CBC, CRYPTO_CTR or
CRYPTO_XTS, thus add them.
These dependencies are likely to be enabled, but if
CRYPTO_DEV_VMX=y && !CRYPTO_MANAGER_DISABLE_TESTS
and either of CRYPTO_AES, CRYPTO_CBC, CRYPTO_CTR or CRYPTO_XTS is built
as module or disabled, alg_test() from crypto/testmgr.c complains during
boot about failing to allocate the generic fallback implementations
(2 == ENOENT):
[ 0.540953] Failed to allocate xts(aes) fallback: -2
[ 0.541014] alg: skcipher: failed to allocate transform for p8_aes_xts: -2
[ 0.541120] alg: self-tests for p8_aes_xts (xts(aes)) failed (rc=-2)
[ 0.544440] Failed to allocate ctr(aes) fallback: -2
[ 0.544497] alg: skcipher: failed to allocate transform for p8_aes_ctr: -2
[ 0.544603] alg: self-tests for p8_aes_ctr (ctr(aes)) failed (rc=-2)
[ 0.547992] Failed to allocate cbc(aes) fallback: -2
[ 0.548052] alg: skcipher: failed to allocate transform for p8_aes_cbc: -2
[ 0.548156] alg: self-tests for p8_aes_cbc (cbc(aes)) failed (rc=-2)
[ 0.550745] Failed to allocate transformation for 'aes': -2
[ 0.550801] alg: cipher: Failed to load transform for p8_aes: -2
[ 0.550892] alg: self-tests for p8_aes (aes) failed (rc=-2)
Fixes: c07f5d3da6 ("crypto: vmx - Adding support for XTS")
Fixes: d2e3ae6f3a ("crypto: vmx - Enabling VMX module for PPC64")
Suggested-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13262fc26c ]
As the potential failure of the dma_set_mask(),
it should be better to check it and return error
if fails.
Fixes: 126bdb606f ("spi: spi-zynqmp-gqspi: return -ENOMEM if dma_map_single fails")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220302092051.121343-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a64ca17e4 ]
If an invalid option is given for "test_suspend=<option>", the entire
string is added to init's environment, so return 1 instead of 0 from
the __setup handler.
Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc5
test_suspend=invalid"
and
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc5
test_suspend=invalid
Fixes: 2ce986892f ("PM / sleep: Enhance test_suspend option with repeat capability")
Fixes: 27ddcc6596 ("PM / sleep: Add state field to pm_states[] entries")
Fixes: a9d7052363 ("PM: Separate suspend to RAM functionality from core")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba7ffcd4c4 ]
If an invalid value is used in "resumedelay=<seconds>", it is
silently ignored. Add a warning message and then let the __setup
handler return 1 to indicate that the kernel command line option
has been handled.
Fixes: 317cf7e5e8 ("PM / hibernate: convert simple_strtoul to kstrtoul")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f69288253 ]
kobjects aren't supposed to be deleted before their child kobjects are
deleted. Apparently this is usually benign; however, a WARN will be
triggered if one of the child kobjects has a named attribute group:
sysfs group 'modes' not found for kobject 'crypto'
WARNING: CPU: 0 PID: 1 at fs/sysfs/group.c:278 sysfs_remove_group+0x72/0x80
...
Call Trace:
sysfs_remove_groups+0x29/0x40 fs/sysfs/group.c:312
__kobject_del+0x20/0x80 lib/kobject.c:611
kobject_cleanup+0xa4/0x140 lib/kobject.c:696
kobject_release lib/kobject.c:736 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x53/0x70 lib/kobject.c:753
blk_crypto_sysfs_unregister+0x10/0x20 block/blk-crypto-sysfs.c:159
blk_unregister_queue+0xb0/0x110 block/blk-sysfs.c:962
del_gendisk+0x117/0x250 block/genhd.c:610
Fix this by moving the kobject_del() and the corresponding
kobject_uevent() to the correct place.
Fixes: 2c2086afc2 ("block: Protect less code with sysfs_lock in blk_{un,}register_queue()")
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220124215938.2769-3-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2724cb9f0 ]
nvme_subsys_check_duplicate_ids should needs to return an error if any of
the identifiers matches, not just if all of them match. But it does not
need to and should not look at the CSI value for this sanity check.
Rewrite the logic to be separate from nvme_ns_ids_equal and optimize it
by reducing duplicate checks for non-present identifiers.
Fixes: ed754e5dee ("nvme: track shared namespaces")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd8099e791 ]
Pass the actual nvme_ns_ids used for the comparison instead of the
ns_head that isn't needed and use a more descriptive function name.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 647d6f09be ]
If the watchdog was already enabled by the BIOS after booting, the
watchdog infrastructure needs to regularly send keepalives to
prevent a unexpected reset.
WDOG_ACTIVE only serves as an status indicator for userspace,
we want to use WDOG_HW_RUNNING instead.
Since my Fujitsu Esprimo P720 does not support the watchdog,
this change is compile-tested only.
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: fb551405c0 (watchdog: sch56xx: Use watchdog core)
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20220131211935.3656-5-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 686d303ee6 ]
On PMBUS devices with multiple pages, the regulator ops need to be
protected with the update mutex. This prevents accidentally changing
the page in a separate thread while operating on the PMBUS_OPERATION
register.
Tested on Infineon xdpe11280 while a separate thread polls for sensor
data.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
Link: https://lore.kernel.org/r/b991506bcbf665f7af185945f70bf9d5cf04637c.1645804976.git.sylv@sylv.io
Fixes: ddbb4db4ce ("hwmon: (pmbus) Add regulator support")
Cc: Alan Tull <atull@opensource.altera.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 609d7ffdc4 ]
The pci_get_slot() increases its reference count, the caller
must decrement the reference count by calling pci_dev_put().
Fixes: 743485ea3b ("spi: pxa2xx-pci: Do a specific setup in a separate function")
Fixes: 2501452160 ("spi: pxa2xx-pci: Enable DMA for Intel Merrifield")
Reported-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220223191637.31147-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a2a464f86 ]
Due to the subreq pointer misuse the private context memory. The aead
soft crypto occasionally casues the OS panic as setting the 64K page.
Here is fix it.
Fixes: 6c46a3297b ("crypto: hisilicon/sec - add fallback tfm...")
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1fb37b5692 ]
Refuse to try mapping zero bytes as this may cause a fault
on some configurations / platforms and it seems the prev.
attempt is not enough and we need to be more explicit.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Fixes: ce0fc6db38 ("crypto: ccree - protect against empty or NULL
scatterlists")
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2544f5e6c ]
__setup() handlers should return 1 if the parameter is handled.
Returning 0 causes the entire string to be added to init's
environment strings (limited to 32 strings), unnecessarily polluting it.
Using the documented string "evm=fix" causes an Unknown parameter message:
Unknown kernel command line parameters
"BOOT_IMAGE=/boot/bzImage-517rc5 evm=fix", will be passed to user space.
and that string is added to init's environment string space:
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc5
evm=fix
With this change, using "evm=fix" acts as expected and an invalid
option ("evm=evm") causes a warning to be printed:
evm: invalid "evm" mode
but init's environment is not polluted with this string, as expected.
Fixes: 7102ebcd65 ("evm: permit only valid security.evm xattrs to be updated")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 272ceeaea3 ]
AUDIT_TIME_* events are generated when there are syscall rules present
that are not related to time keeping. This will produce noisy log
entries that could flood the logs and hide events we really care about.
Rather than immediately produce the AUDIT_TIME_* records, store the data
in the context and log it at syscall exit time respecting the filter
rules.
Note: This eats the audit_buffer, unlike any others in show_special().
Please see https://bugzilla.redhat.com/show_bug.cgi?id=1991919
Fixes: 7e8eda734d ("ntp: Audit NTP parameters adjustment")
Fixes: 2d87a0674b ("timekeeping: Audit clock adjustments")
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
[PM: fixed style/whitespace issues]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 973d74e938 ]
When loading rockchip crypto module, testmgr complains that ivsize of ecb-des3-ede-rk
is not the same than generic implementation.
In fact ECB does not use an IV.
Fixes: ce0183cb64 ("crypto: rockchip - switch to skcipher API")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6170abb21e ]
CC can have multiple sub-strings like "ccache gcc". For check_cc.sh,
CC needs to be treated like one argument. Put double quotes around it to
make CC one string and hence one argument.
Fixes: 2adcba79e6 ("selftests/x86: Add a selftest for SGX")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220214184109.3739179-3-usama.anjum@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b06e15ebd5 ]
Add check to test if CC has a string. CC can have multiple sub-strings
like "ccache gcc". Erorr pops up if it is treated as single string and
double quotes are used around it. This can be fixed by removing the
quotes and not treating CC as a single string.
Fixes: e9886ace22 ("selftests, x86: Rework x86 target architecture detection")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220214184109.3739179-2-usama.anjum@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f122d103b5 ]
Don't need to do blkg_iostat_set for top blkg iostat on each CPU,
so move it after percpu stat aggregation.
Fixes: ef45fe470e ("blk-cgroup: show global disk stats in root cgroup io.stat")
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220213085902.88884-1-zhouchengming@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee017ee353 ]
The 'fixmap' is a global resource and is used recursively by
create pud mapping(), leading to a potential race condition in the
presence of a concurrent call to alloc_init_pud():
kernel_init thread virtio-mem workqueue thread
================== ===========================
alloc_init_pud(...) alloc_init_pud(...)
pudp = pud_set_fixmap_offset(...) pudp = pud_set_fixmap_offset(...)
READ_ONCE(*pudp)
pud_clear_fixmap(...)
READ_ONCE(*pudp) // CRASH!
As kernel may sleep during creating pud mapping, introduce a mutex lock to
serialise use of the fixmap entries by alloc_init_pud(). However, there is
no need for locking in early boot stage and it doesn't work well with
KASLR enabled when early boot. So, enable lock when system_state doesn't
equal to "SYSTEM_BOOTING".
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: f471044545 ("arm64: mm: use fixmap when creating page tables")
Link: https://lore.kernel.org/r/20220201114400.56885-1-jianyong.wu@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit efa90c11f6 ]
All supported versions of Clang perform auto-init of __builtin_alloca()
when stack auto-init is on (CONFIG_INIT_STACK_ALL_{ZERO,PATTERN}).
add_random_kstack_offset() uses __builtin_alloca() to add a stack
offset. This means, when CONFIG_INIT_STACK_ALL_{ZERO,PATTERN} is
enabled, add_random_kstack_offset() will auto-init that unused portion
of the stack used to add an offset.
There are several problems with this:
1. These offsets can be as large as 1023 bytes. Performing
memset() on them isn't exactly cheap, and this is done on
every syscall entry.
2. Architectures adding add_random_kstack_offset() to syscall
entry implemented in C require them to be 'noinstr' (e.g. see
x86 and s390). The potential problem here is that a call to
memset may occur, which is not noinstr.
A x86_64 defconfig kernel with Clang 11 and CONFIG_VMLINUX_VALIDATION shows:
| vmlinux.o: warning: objtool: do_syscall_64()+0x9d: call to memset() leaves .noinstr.text section
| vmlinux.o: warning: objtool: do_int80_syscall_32()+0xab: call to memset() leaves .noinstr.text section
| vmlinux.o: warning: objtool: __do_fast_syscall_32()+0xe2: call to memset() leaves .noinstr.text section
| vmlinux.o: warning: objtool: fixup_bad_iret()+0x2f: call to memset() leaves .noinstr.text section
Clang 14 (unreleased) will introduce a way to skip alloca initialization
via __builtin_alloca_uninitialized() (https://reviews.llvm.org/D115440).
Constrain RANDOMIZE_KSTACK_OFFSET to only be enabled if no stack
auto-init is enabled, the compiler is GCC, or Clang is version 14+. Use
__builtin_alloca_uninitialized() if the compiler provides it, as is done
by Clang 14.
Link: https://lkml.kernel.org/r/YbHTKUjEejZCLyhX@elver.google.com
Fixes: 39218ff4c6 ("stack: Optionally randomize kernel stack offset each syscall")
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220131090521.1947110-2-elver@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47c3e06ed9 ]
This func misses checking for platform_get_irq()'s call and may passes the
negative error codes to request_threaded_irq(), which takes unsigned IRQ #,
causing it to fail with -EINVAL, overriding an original error code.
Stop calling request_threaded_irq() with invalid IRQ #s.
Fixes: 921fc1838f ("spi: tegra210-quad: Add support for Tegra210 QSPI controller")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220128165956.27821-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f92724d4b ]
This func misses checking for platform_get_irq()'s call and may passes the
negative error codes to request_threaded_irq(), which takes unsigned IRQ #,
causing it to fail with -EINVAL, overriding an original error code.
Stop calling request_threaded_irq() with invalid IRQ #s.
Fixes: f333a331ad ("spi/tegra114: add spi driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220128165238.25615-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d841af23a ]
No issues were found while using the driver with dm-crypt enabled. So
CONFIG_DM_CRYPT check in the driver can be removed.
This also fixes the NULL pointer dereference in driver release if
CONFIG_DM_CRYPT is enabled.
...
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
...
Call trace:
crypto_unregister_alg+0x68/0xfc
crypto_unregister_skciphers+0x44/0x60
otx2_cpt_crypto_exit+0x100/0x1a0
otx2_cptvf_remove+0xf8/0x200
pci_device_remove+0x3c/0xd4
__device_release_driver+0x188/0x234
device_release_driver+0x2c/0x4c
...
Fixes: 6f03f0e8b6 ("crypto: octeontx2 - register with linux crypto framework")
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38b16d6cfe ]
As the potential failure of the allocation, kmemdup() may return NULL.
Then, 'bin_attr_data_vault.private' will be NULL, but
'bin_attr_data_vault.size' is not 0, which is not consistent.
Therefore, it is better to check the return value of kmemdup() to
avoid the confusion.
Fixes: 0ba13c763a ("thermal/int340x_thermal: Export GDDV")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8b87fd954 ]
selinux_sb_mnt_opts_compat() is called under the sb_lock spinlock and
shouldn't be performing any memory allocations. Fix this by parsing the
sids at the same time we're chopping up the security mount options
string and then using the pre-parsed sids when doing the comparison.
Fixes: cc274ae776 ("selinux: fix sleeping function called from invalid context")
Fixes: 69c4a42d72 ("lsm,selinux: add new hook to compare new mount to an existing mount")
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28e9b6d819 ]
This patch fixes a bug in scatterlist processing that may cause incorrect AES block encryption/decryption.
Fixes: 2e6d793e1b ("crypto: mxs-dcp - Use sg_mapping_iter to copy data")
Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66eae85033 ]
The function crypto_authenc_decrypt_tail discards its flags
argument and always relies on the flags from the original request
when starting its sub-request.
This is clearly wrong as it may cause the SLEEPABLE flag to be
set when it shouldn't.
Fixes: 92d95ba917 ("crypto: authenc - Convert to new AEAD interface")
Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 881fc7fba6 ]
When adding hashes support to sun8i-ss, I have added them only on A83T.
But I forgot that 0 is a valid algorithm ID, so hashes are enabled on A80 but
with an incorrect ID.
Anyway, even with correct IDs, hashes do not work on A80 and I cannot
find why.
So let's disable all of them on A80.
Fixes: d9b45418a9 ("crypto: sun8i-ss - support hash algorithms")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab7d88549e ]
The Cavium ThunderX Random Number Generator is only present on Cavium
ThunderX SoCs, and not available as an independent PCIe endpoint. Hence
add a dependency on ARCH_THUNDER, to prevent asking the user about this
driver when configuring a kernel without Cavium Thunder SoC support.
Fixes: cc2f1908c6 ("hwrng: cavium - Add Cavium HWRNG driver for ThunderX SoC.")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 680efb3354 ]
This RNG device is present on Marvell OcteonTx2 silicons as well and
also provides entropy health status.
HW continuously checks health condition of entropy and reports
faults. Fault is in terms of co-processor cycles since last fault
detected. This doesn't get cleared and only updated when new fault
is detected. Also there are chances of detecting false positives.
So to detect a entropy failure SW has to check if failures are
persistent ie cycles elapsed is frequently updated by HW.
This patch adds support to detect health failures using below algo.
1. Consider any fault detected before 10ms as a false positive and ignore.
10ms is chosen randomly, no significance.
2. Upon first failure detection make a note of cycles elapsed and when this
error happened in realtime (cntvct).
3. Upon subsequent failure, check if this is new or a old one by comparing
current cycles with the ones since last failure. cycles or time since
last failure is calculated using cycles and time info captured at (2).
HEALTH_CHECK status register is not available to VF, hence had to map
PF registers. Also since cycles are in terms of co-processor cycles,
had to retrieve co-processor clock rate from RST device.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e1ec11d3e ]
Initialize psp_ret inside of __sev_platform_init_locked() because there
are many failure paths with PSP initialization that do not set
__sev_do_cmd_locked().
Fixes: e423b9d75e77: ("crypto: ccp - Move SEV_INIT retry for corrupted data")
Signed-off-by: Peter Gonda <pgonda@google.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: John Allen <john.allen@amd.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bcb62828e3 ]
sel_make_avc_files() might fail and return a negative errno value on
memory allocation failures. Re-add the check of the return value,
dropped in 66f8e2f03c ("selinux: sidtab reverse lookup hash table").
Reported by clang-analyzer:
security/selinux/selinuxfs.c:2129:2: warning: Value stored to
'ret' is never read [deadcode.DeadStores]
ret = sel_make_avc_files(dentry);
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 66f8e2f03c ("selinux: sidtab reverse lookup hash table")
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
[PM: description line wrapping, added proper commit ref]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0266c25e7c ]
LSM blob has been involved for superblock's security struct. So fix the
remaining direct access to sb->s_security by using the LSM blob
mechanism.
Fixes: 08abe46b2c ("selinux: fall back to SECURITY_FS_USE_GENFS if no xattr support")
Fixes: 69c4a42d72 ("lsm,selinux: add new hook to compare new mount to an existing mount")
Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6390d42c21 ]
drivers/regulator/qcom_smd-regulator.c:1318:1-33: WARNING: Function "for_each_available_child_of_node" should have of_node_put() before return around line 1321.
Semantic patch information:
False positives can be due to function calls within the for_each
loop that may encapsulate an of_node_put.
Generated by: scripts/coccinelle/iterators/for_each_child.cocci
Fixes: 14e2976fba ("regulator: qcom_smd: Align probe function with rpmh-regulator")
CC: Konrad Dybcio <konrad.dybcio@somainline.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2201151210170.3051@hadrien
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 825da4e9ce upstream.
Commit c7a75d0782 ("PCI: xgene: Fix IB window setup") tried to
fix the damages that 6dce5aa59e ("PCI: xgene: Use inbound resources
for setup") caused, but actually didn't improve anything for some
plarforms (at least Mustang and m400 are still broken).
Given that 6dce5aa59e has been reverted, revert this patch as well,
restoring the PCIe support on XGene to its pre-5.5, working state.
Link: https://lore.kernel.org/r/YjN8pT5e6/8cRohQ@xps13.dannf
Link: https://lore.kernel.org/r/20220321104843.949645-3-maz@kernel.org
Fixes: c7a75d0782 ("PCI: xgene: Fix IB window setup")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>
Cc: Toan Le <toan@os.amperecomputing.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Krzysztof Wilczyński <kw@linux.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Stéphane Graber <stgraber@ubuntu.com>
Cc: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 92912b1751 upstream.
Writes to a Downstream Port's Slot Control register are PCIe hotplug
"commands." If the Port supports Command Completed events, software must
wait for a command to complete before writing to Slot Control again.
pcie_do_write_cmd() sets ctrl->cmd_busy when it writes to Slot Control. If
software notification is enabled, i.e., PCI_EXP_SLTCTL_HPIE and
PCI_EXP_SLTCTL_CCIE are set, ctrl->cmd_busy is cleared by pciehp_isr().
But when software notification is disabled, as it is when pcie_init()
powers off an empty slot, pcie_wait_cmd() uses pcie_poll_cmd() to poll for
command completion, and it neglects to clear ctrl->cmd_busy, which leads to
spurious timeouts:
pcieport 0000:00:03.0: pciehp: Timeout on hotplug command 0x01c0 (issued 2264 msec ago)
pcieport 0000:00:03.0: pciehp: Timeout on hotplug command 0x05c0 (issued 2288 msec ago)
Clear ctrl->cmd_busy in pcie_poll_cmd() when it detects a Command Completed
event (PCI_EXP_SLTSTA_CC).
[bhelgaas: commit log]
Fixes: a5dd4b4b05 ("PCI: pciehp: Wait for hotplug command completion where necessary")
Link: https://lore.kernel.org/r/20211111054258.7309-1-zhangliguang@linux.alibaba.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215143
Link: https://lore.kernel.org/r/20211126173309.GA12255@wunner.de
Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f81f095e87 upstream.
The intention of commit 886a9c1347 ("PCI: dwc: Move link handling into
common code") was to standardize the behavior of link down as explained
in its commit log:
"The behavior for a link down was inconsistent as some drivers would fail
probe in that case while others succeed. Let's standardize this to
succeed as there are usecases where devices (and the link) appear later
even without hotplug. For example, a reconfigured FPGA device."
The pci-imx6 still fails to probe when the link is not present, which
causes the following warning:
imx6q-pcie 8ffc000.pcie: Phy link never came up
imx6q-pcie: probe of 8ffc000.pcie failed with error -110
------------[ cut here ]------------
WARNING: CPU: 0 PID: 30 at drivers/regulator/core.c:2257 _regulator_put.part.0+0x1b8/0x1dc
Modules linked in:
CPU: 0 PID: 30 Comm: kworker/u2:2 Not tainted 5.15.0-next-20211103 #1
Hardware name: Freescale i.MX6 SoloX (Device Tree)
Workqueue: events_unbound async_run_entry_fn
[<c0111730>] (unwind_backtrace) from [<c010bb74>] (show_stack+0x10/0x14)
[<c010bb74>] (show_stack) from [<c0f90290>] (dump_stack_lvl+0x58/0x70)
[<c0f90290>] (dump_stack_lvl) from [<c012631c>] (__warn+0xd4/0x154)
[<c012631c>] (__warn) from [<c0f87b00>] (warn_slowpath_fmt+0x74/0xa8)
[<c0f87b00>] (warn_slowpath_fmt) from [<c076b4bc>] (_regulator_put.part.0+0x1b8/0x1dc)
[<c076b4bc>] (_regulator_put.part.0) from [<c076b574>] (regulator_put+0x2c/0x3c)
[<c076b574>] (regulator_put) from [<c08c3740>] (release_nodes+0x50/0x178)
Fix this problem by ignoring the dw_pcie_wait_for_link() error like
it is done on the other dwc drivers.
Tested on imx6sx-sdb and imx6q-sabresd boards.
Link: https://lore.kernel.org/r/20220106103645.2790803-1-festevam@gmail.com
Fixes: 886a9c1347 ("PCI: dwc: Move link handling into common code")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Rammhold
Mark Rutland
Guillaume Ranquet
Claudiu Beznea
Krzysztof Kozlowski
Marek Szyprowski
Drew Fustini
Petr Vorel
Corentin Labbe
Jiasheng Jiang
Randy Dunlap
Eric Biggers
Christoph Hellwig
Armin Wolf
Patrick Rudolph
Andy Shevchenko
Kai Ye
Gilad Ben-Yossef
Richard Guy Briggs
Muhammad Usama Anjum
Chengming Zhou
Jianyong Wu
Marco Elver
Miaoqian Lin
Shijith Thotton
Scott Mayhew
Tomas Paukrt
Herbert Xu
Geert Uytterhoeven
Sunil Goutham
Peter Gonda
Christian Göttsche
GONG, Ruiqi
kernel test robot
Marc Zyngier
Liguang Zhang
Fabio Estevam
Mastan Katragadda