strtobool() is the same as kstrtobool().
However, the latter is more used within the kernel.
In order to remove strtobool() and slightly simplify kstrtox.h, switch to
the other function name.
While at it, include the corresponding header file (<linux/kstrtox.h>)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/34f04735d20e0138695dd4070651bd860a36b81c.1673688120.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are spelling mistakes in config show text. Fix these.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20220928211637.62529-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a list_for_each_entry() loop exits without hitting a break statement
then the iterator points to invalid memory. So in this code the
"tst->name" dereference is an out bounds read. It's an offset from the
&test_upload_list pointer and it will likely work fine most of the time
but it's not correct.
One alternative is to fix this this by changing the test to:
if (list_entry_is_head(tst, &test_upload_list, node)) {
But the simpler, trendy new way is just create a new variable and test
for NULL.
Fixes: a31ad463b7 ("test_firmware: Add test support for firmware upload")
Reviewed-by: Russ Weight <russell.h.weight@intel.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YnTGU3UJOIA09I7e@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add error injection capability to the test_firmware module specifically
for firmware upload testing. Error injection instructions are transferred
as the first part of the firmware payload. The format of an error
injection string is similar to the error strings that may be read from
the error sysfs node.
To inject the error "programming:hw-error", one would use the error
injection string "inject:programming:hw-error" as the firmware payload:
$ echo 1 > loading
$ echo inject:programming:hw-error > data
$ echo 0 > loading
$ cat status
idle
$ cat error
programming:hw-error
The first part of the error string is the progress state of the upload at
the time of the error. The progress state would be one of the following:
"preparing", "transferring", or "programming". The second part of the
error string is one of the following: "hw-error", "timeout", "device-busy",
"invalid-file-size", "read-write-error", "flash-wearout", and "user-abort".
Note that all of the error strings except "user-abort" will fail without
delay. The "user-abort" error will cause the firmware upload to stall at
the requested progress state for up to 5 minutes to allow you to echo 1
to the cancel sysfs node. It is this cancellation that causes the
'user-abort" error. If the upload is not cancelled within the 5 minute
time period, then the upload will complete without an error.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Tianfei zhang <tianfei.zhang@intel.com>
Tested-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20220421212204.36052-8-russell.h.weight@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for testing the firmware upload driver. There are four sysfs
nodes added:
upload_register: write-only
Write the name of the firmware device node to be created
upload_unregister: write-only
Write the name of the firmware device node to be destroyed
config_upload_name: read/write
Set the name to be used by upload_read
upload_read: read-only
Read back the data associated with the firmware device node named
in config_upload_name
You can create multiple, concurrent firmware device nodes for firmware
upload testing. Read firmware back and validate it using config_upload_name
and upload_red.
Example:
$ cd /sys/devices/virtual/misc/test_firmware
$ echo -n fw1 > upload_register
$ ls fw1
cancel data device error loading power remaining_size status
subsystem uevent
$ dd if=/dev/urandom of=/tmp/random-firmware.bin bs=512 count=4
4+0 records in
4+0 records out
2048 bytes (2.0 kB, 2.0 KiB) copied, 0.000131959 s, 15.5 MB/s
$ echo 1 > fw1/loading
$ cat /tmp/random-firmware.bin > fw1/data
$ echo 0 > fw1/loading
$ cat fw1/status
idle
$ cat fw1/error
$ echo -n fw1 > config_upload_name
$ cmp /tmp/random-firmware.bin upload_read
$ echo $?
0
$ echo -n fw1 > upload_unregister
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Tianfei zhang <tianfei.zhang@intel.com>
Tested-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20220421212204.36052-7-russell.h.weight@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With commit 312c004d36 ("[PATCH] driver core: replace "hotplug" by
"uevent"") already in the tree over a decade, update the name of
FW_ACTION defines to follow semantics, and reflect what the defines are
really meant for, i.e. whether or not generate user space event.
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210425020024.28057-1-shawn.guo@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use proper conversion functions. kstrto*() variants exist for all
standard types.
Link: https://lkml.kernel.org/r/20201122123410.GB92364@localhost.localdomain
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add additional hooks to test_firmware to pass in support
for partial file read using request_firmware_into_buf():
buf_size: size of buffer to request firmware into
partial: indicates that a partial file request is being made
file_offset: to indicate offset into file to request
Also update firmware selftests to use the new partial read test API.
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201002173828.2099543-17-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On non-EFI systems, it wasn't possible to test the platform firmware
loader because it will have never set "checked_fw" during __init.
Instead, allow the test code to override this check. Additionally split
the declarations into a private symbol namespace so there is greater
enforcement of the symbol visibility.
Fixes: 548193cba2 ("test_firmware: add support for firmware_request_platform")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20200909225354.3118328-1-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unnecessary use of test_fw_mutex in test_dev_config_show_xxx
functions that show simple bool, int, and u8.
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20200415002517.4328-1-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for testing firmware_request_platform through a new
trigger_request_platform trigger.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20200115163554.101315-6-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add test config into_buf to allow request_firmware_into_buf to be
called instead of request_firmware/request_firmware_direct. The number
of parameters differ calling request_firmware_into_buf and support
has not been added to test such api in test_firmware until now.
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20190822184005.901-2-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In test_firmware_init(), the buffer pointed to by the global pointer
'test_fw_config' is allocated through kzalloc(). Then, the buffer is
initialized in __test_firmware_config_init(). In the case that the
initialization fails, the following execution in test_firmware_init() needs
to be terminated with an error code returned to indicate this failure.
However, the allocated buffer is not freed on this execution path, leading
to a memory leak bug.
To fix the above issue, free the allocated buffer before returning from
test_firmware_init().
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Link: https://lore.kernel.org/r/1563084696-6865-1-git-send-email-wang6495@umn.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are some small char and misc driver fixes for 5.2-rc4 to resolve a
number of reported issues.
The most "notable" one here is the kernel headers in proc^Wsysfs fixes.
Those changes move the header file info into sysfs and fixes the build
issues that you reported.
Other than that, a bunch of small habanalabs driver fixes, some fpga
driver fixes, and a few other tiny driver fixes.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXPuEVg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yma0QCfVPa7r1rHqljz1UgvjKJTzVg8g9wAn1W1mddx
MIlG+0+ZnBdaPzyzoY1O
=0LJD
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char and misc driver fixes for 5.2-rc4 to resolve
a number of reported issues.
The most "notable" one here is the kernel headers in proc^Wsysfs
fixes. Those changes move the header file info into sysfs and fixes
the build issues that you reported.
Other than that, a bunch of small habanalabs driver fixes, some fpga
driver fixes, and a few other tiny driver fixes.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
habanalabs: Read upper bits of trace buffer from RWPHI
habanalabs: Fix virtual address access via debugfs for 2MB pages
fpga: zynqmp-fpga: Correctly handle error pointer
habanalabs: fix bug in checking huge page optimization
habanalabs: Avoid using a non-initialized MMU cache mutex
habanalabs: fix debugfs code
uapi/habanalabs: add opcode for enable/disable device debug mode
habanalabs: halt debug engines on user process close
test_firmware: Use correct snprintf() limit
genwqe: Prevent an integer overflow in the ioctl
parport: Fix mem leak in parport_register_dev_model
fpga: dfl: expand minor range when registering chrdev region
fpga: dfl: Add lockdep classes for pdata->lock
fpga: dfl: afu: Pass the correct device to dma_mapping_error()
fpga: stratix10-soc: fix use-after-free on s10_init()
w1: ds2408: Fix typo after 49695ac468 (reset on output_write retry with readback)
kheaders: Do not regenerate archive if config is not changed
kheaders: Move from proc to sysfs
lkdtm/bugs: Adjust recursion test to avoid elision
lkdtm/usercopy: Moves the KERNEL_DS test to non-canonical
The limit here is supposed to be how much of the page is left, but it's
just using PAGE_SIZE as the limit.
The other thing to remember is that snprintf() returns the number of
bytes which would have been copied if we had had enough room. So that
means that if we run out of space then this code would end up passing a
negative value as the limit and the kernel would print an error message.
I have change the code to use scnprintf() which returns the number of
bytes that were successfully printed (not counting the NUL terminator).
Fixes: c92316bf8e ("test_firmware: add batched firmware tests")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have MODULE_LICENCE("GPL*") inside which was used in the initial
scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The test_fw_config->reqs allocation succeeded so these addresses can't
be NULL.
Also on the second error path, we forgot to set "rc = -ENOMEM;".
Link: http://lkml.kernel.org/r/20190221183700.GA1737@kadam
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: "Luis R. Rodriguez" <mcgrof@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the case where eq->fw->size > PAGE_SIZE the error return rc
is being set to EINVAL however this is being overwritten to
rc = req->fw->size because the error exit path via label 'out' is
not being taken. Fix this by adding the jump to the error exit
path 'out'.
Detected by CoverityScan, CID#1453465 ("Unused value")
Fixes: c92316bf8e ("test_firmware: add batched firmware tests")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently <linux/slab.h> #includes <linux/kmemleak.h> for no obvious
reason. It looks like it's only a convenience, so remove kmemleak.h
from slab.h and add <linux/kmemleak.h> to any users of kmemleak_* that
don't already #include it. Also remove <linux/kmemleak.h> from source
files that do not use it.
This is tested on i386 allmodconfig and x86_64 allmodconfig. It would
be good to run it through the 0day bot for other $ARCHes. I have
neither the horsepower nor the storage space for the other $ARCHes.
Update: This patch has been extensively build-tested by both the 0day
bot & kisskb/ozlabs build farms. Both of them reported 2 build failures
for which patches are included here (in v2).
[ slab.h is the second most used header file after module.h; kernel.h is
right there with slab.h. There could be some minor error in the
counting due to some #includes having comments after them and I didn't
combine all of those. ]
[akpm@linux-foundation.org: security/keys/big_key.c needs vmalloc.h, per sfr]
Link: http://lkml.kernel.org/r/e4309f98-3749-93e1-4bb7-d9501a39d015@infradead.org
Link: http://kisskb.ellerman.id.au/kisskb/head/13396/
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reported-by: Michael Ellerman <mpe@ellerman.id.au> [2 build failures]
Reported-by: Fengguang Wu <fengguang.wu@intel.com> [2 build failures]
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Wei Yongjun <weiyongjun1@huawei.com>
Cc: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: John Johansen <john.johansen@canonical.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes the following sparse warnings:
lib/test_firmware.c:99:20: warning:
symbol 'test_fw_config' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The firmware API has a feature to enable batching requests for the same fil
e under one worker, so only one lookup is done. This only triggers if we so
happen to schedule two lookups for same file around the same time, or if
release_firmware() has not been called for a successful firmware call. This
can happen for instance if you happen to have multiple devices and one
device driver for certain drivers where the stars line up scheduling
wise.
This adds a new sync and async test trigger. Instead of adding a new
trigger for each new test type we make the tests a bit configurable so that
we could configure the tests in userspace and just kick a test through a
few basic triggers. With this, for instance the two types of sync requests:
o request_firmware() and
o request_firmware_direct()
can be modified with a knob. Likewise the two type of async requests:
o request_firmware_nowait(uevent=true) and
o request_firmware_nowait(uevent=false)
can be configured with another knob. The call request_firmware_into_buf()
has no users... yet.
The old tests are left in place as-is given they serve a few other purposes
which we are currently not interested in also testing yet. This will change
later as we will be able to just consolidate all tests under a few basic
triggers with just one general configuration setup.
We perform two types of tests, one for where the file is present and one
for where the file is not present. All test tests go tested and they now
pass for the following 3 kernel builds possible for the firmware API:
0. Most distro setup:
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n
CONFIG_FW_LOADER_USER_HELPER=y
1. Android:
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_FW_LOADER_USER_HELPER=y
2. Rare build:
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n
CONFIG_FW_LOADER_USER_HELPER=n
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We have no custom fallback mechanism test interface. Provide one.
This tests both the custom fallback mechanism and cancelling the
it.
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This will make further changes easier to review.
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We might want to test for bugs like that found in commit f9692b2699
("firmware: fix possible use after free on name on asynchronous
request"), where the asynchronous request API had race conditions.
Let's add a simple file that will launch the async request, then wait
until it's complete and report the status. It's not a true async test
(we're using a mutex + wait_for_completion(), so we can't get more than
one going at the same time), but it does help make sure the basic API is
sane, and it can catch some class of bugs.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
We're essentially just doing an open-coded kstrndup(). The only
differences are with what happens after the first '\0' character, but
request_firmware() doesn't care about that.
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
request_firmware() failures currently won't get reported at all (the
error code is discarded). What's more, we get confusing messages, like:
# echo -n notafile > /sys/devices/virtual/misc/test_firmware/trigger_request
[ 8280.311856] test_firmware: loading 'notafile'
[ 8280.317042] test_firmware: load of 'notafile' failed: -2
[ 8280.322445] test_firmware: loaded: 0
# echo $?
0
Report the failures via write() errors, and don't say we "loaded"
anything.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
This provides a simple interface to trigger the firmware_class loader
to test built-in, filesystem, and user helper modes. Additionally adds
tests via the new interface to the selftests tree.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe JAILLET
Randy Dunlap
Zhengchao Shao
Colin Ian King
Dan Carpenter
Russ Weight
Shawn Guo
Alexey Dobriyan
Scott Branden
Kees Cook
Hans de Goede
Wenwen Wang
Linus Torvalds
Thomas Gleixner
Colin Ian King
Wei Yongjun
Joe Perches
Luis R. Rodriguez
Brian Norris