There is a possibility of bug when variable type has changed but
corresponding struct passed to the sizeof has not.
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200723145927.882743-2-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 3c3b7ddef7, as it
turns out Tomas made a better series of patches for this same issue.
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drivers should not use legacy power management as they have to manage power
states and related operations, for the device, themselves. This driver was
handling them with the help of PCI helper functions like
pci_save/restore_state(), pci_enable/disable_device(), etc.
With generic PM, all essentials will be handled by the PCI core. Driver
needs to do only device-specific operations.
The driver was also using pci_enable_wake(...,..., 0) to disable wake. Use
device_wakeup_disable() instead.
Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Link: https://lore.kernel.org/r/20200720101722.145211-1-vaibhavgupta40@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid a memset after a call to 'dma_alloc_coherent()'.
This is useless since
commit 518a2f1925 ("dma-mapping: zero memory returned from dma_alloc_*")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20200718070246.338016-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200713104453.33414-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200713164024.35988-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
One-element arrays are being deprecated[1]. Replace the one-element
arrays with a simple value type u8 reserved, once this is just a
placeholder for alignment.
Also, while there, use the preferred form for passing a size of a struct.
The alternative form where struct name is spelled out hurts readability
and introduces an opportunity for a bug when the variable type is changed
but the corresponding sizeof that is passed as argument is not.
[1] https://github.com/KSPP/linux/issues/79
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200714214516.GA1040@embeddedor
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200717185925.84102-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a structure.
Kernel code should always use “flexible array members”[1] for these
cases. The older style of one-element or zero-length arrays should
no longer be used[2].
Also, make use of the array_size() helper instead of the open-coded
version in memcpy(). These sorts of multiplication factors need to
be wrapped in array_size().
And while there, use the preferred form for passing a size of a struct.
The alternative form where struct name is spelled out hurts readability
and introduces an opportunity for a bug when the pointer variable type is
changed but the corresponding sizeof that is passed as argument is not.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/79
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200722181534.GA31357@embeddedor
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When reading registers defined by the PCIe spec, use the names already
defined by the PCI core. This makes maintenance of the PCI core and
drivers easier. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200721212336.1159079-6-helgaas@kernel.org
[ additional replacements due to changes in my tree - gregkh ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of hard-coding the location of the L1 PM Substates capability based
on the Device ID, search for it in the extended capabilities list. This
works for any device, as long as it implements the L1 PM Substates
capability correctly, so it doesn't require maintenance as new devices are
added. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200721212336.1159079-5-helgaas@kernel.org
[ minor addition due to differences in my tree - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtsx_pci_read_config_dword() and similar wrappers around the PCI config
accessors add very little value, and they obscure the fact that often we
are accessing standard PCI registers that should be coordinated with the
PCI core.
Remove the wrappers and use the PCI config accessors directly. No
functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200721212336.1159079-4-helgaas@kernel.org
[ fixed up some other instances as original patch was based on old tree - gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are no more uses of struct rtsx_pcr.pcie_cap. Remove it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200721212336.1159079-3-helgaas@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of using the driver-specific rtsx_pci_write_config_byte() to update
the PCIe Link Control Register, use pcie_capability_write_word() like the
rest of the kernel does. This makes it easier to maintain ASPM across the
PCI core and drivers.
No functional change intended. I missed this when doing 3d1e7aa80d
("misc: rtsx: Use pcie_capability_clear_and_set_word() for
PCI_EXP_LNKCTL").
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200721212336.1159079-2-helgaas@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid the overhead of the dma ops support for tiny builds that only
use the direct mapping.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Queue index is received from the user. Therefore, we must validate it
before using it to access the queue props array.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200713175506.36676-1-grandmaster@al2klimov.de
Some opencapi FPGA images allow to control if the FPGA should be reloaded
on the next adapter reset. If it is supported, the image specifies it
through a Vendor Specific DVSEC in the config space of function 0.
Signed-off-by: Philippe Bergheaud <felix@linux.ibm.com>
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200619140439.153962-1-fbarrat@linux.ibm.com
In reference to the PCI spec (Chapter 2), PCIBIOS* is an x86 concept.
There scope should be limited within arch/x86.
Change all PCIBIOS_SUCCESSFUL to 0
Signed-off-by: "Saheed O. Bolarinwa" <refactormyself@gmail.com>
Link: https://lore.kernel.org/r/20200713122247.10985-14-refactormyself@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We see that sometimes the CPU in GOYA and GAUDI is occupied by the
power/thermal loop and can't answer requests from the driver fast enough.
Therefore, to avoid false notifications on timeouts, increase the timeout
to 4 seconds on each message sent to the device CPU.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
For debugging purposes, we need to allow the root user better control of
the clock gating feature of the DMA and compute engines. Therefore, change
the clock gating debugfs interface to be bitmask instead of true/false.
Each bit represents a different engine, according to gaudi_engine_id enum.
See debugfs documentation for more details.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
WREG_BULK is a special packet that has a variable length. Therefore, we
can't parse it when validating CBs that go to the PCI DMA queue. In case
the user needs to use it, it can put multiple WREG32 packets instead.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
In order to support new chip rts5228, the definitions of some internal
registers and workflow have to be modified.
Added rts5228.c rts5228.h for independent functions of the new chip rts5228
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Link: https://lore.kernel.org/r/20200706070259.32565-1-ricky_wu@realtek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vop_dc_to_vdev dropped an __iomem tag on its argument,
causing a sparse warning. Fix it up.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20200710113447.427927-1-mst@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Keeping the pointer increment though.
Fixes the following W=1 kernel build warning:
drivers/misc/cxl/flash.c: In function ‘update_devicetree’:
drivers/misc/cxl/flash.c:178:16: warning: variable ‘drc_index’ set but not used [-Wunused-but-set-variable]
178 | __be32 *data, drc_index, phandle;
| ^~~~~~~~~
Cc: Frederic Barrat <fbarrat@linux.ibm.com>
Cc: Andrew Donnellan <ajd@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200709065651.GY3500@dell
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
... as is the case when !CONFIG_ACPI.
Fixes the following W=1 kernel build warning:
drivers/misc/eeprom/at24.c:228:36: warning: ‘at24_acpi_ids’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20200701093616.GX1179328@dell
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix NULL pointer error if removing uacce's parent module during app's
running. SIGBUS is already reported by do_page_fault, so uacce_vma_fault
is not needed. If providing vma_fault, vmf->page has to be filled as well,
required by __do_fault.
Reported-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/1592229357-1904-1-git-send-email-zhangfei.gao@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The method struct pci_error_handlers.error_detected() is defined and
documented as taking an 'enum pci_channel_state' for the second argument,
but most drivers use 'pci_channel_state_t' instead.
This 'pci_channel_state_t' is not a typedef for the enum but a typedef for
a bitwise type in order to have better/stricter typechecking.
Consolidate everything by using 'pci_channel_state_t' in the method's
definition, in the related helpers and in the drivers.
Enforce use of 'pci_channel_state_t' by replacing 'enum pci_channel_state'
with an anonymous 'enum'.
Note: Currently, from a typechecking point of view this patch changes
nothing because only the constants defined by the enum are bitwise, not the
enum itself (sparse doesn't have the notion of 'bitwise enum'). This may
change in some not too far future, hence the patch.
[bhelgaas: squash in
https://lore.kernel.org/r/20200702162651.49526-3-luc.vanoostenryck@gmail.comhttps://lore.kernel.org/r/20200702162651.49526-4-luc.vanoostenryck@gmail.com]
Link: https://lore.kernel.org/r/20200702162651.49526-2-luc.vanoostenryck@gmail.com
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Formatting is correct and descriptions are all present, but some
of the argument names are not properly represented in the
documentation.
Fixes the following W=1 build warnings:
drivers/misc/ibmvmc.c:780: warning: Function parameter or member 'msg_len' not described in 'ibmvmc_send_msg'
drivers/misc/ibmvmc.c:780: warning: Excess function parameter 'msg_length' description in 'ibmvmc_send_msg'
drivers/misc/ibmvmc.c:1041: warning: Function parameter or member 'buffer' not described in 'ibmvmc_write'
drivers/misc/ibmvmc.c:1041: warning: Excess function parameter 'buf' description in 'ibmvmc_write'
drivers/misc/ibmvmc.c:1360: warning: Function parameter or member 'file' not described in 'ibmvmc_ioctl'
drivers/misc/ibmvmc.c:1360: warning: Excess function parameter 'session' description in 'ibmvmc_ioctl'
Cc: Steven Royer <seroyer@linux.ibm.com>
Cc: Adam Reznechek <adreznec@linux.vnet.ibm.com>
Cc: "Bryant G. Ly" <bryantly@linux.vnet.ibm.com>
Cc: Dave Engebretsen <engebret@us.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-30-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A nice attempt was made to provide kerneldoc headers for
read_template_version() and read_afu_lpc_memory_info() however,
the provided formatting does not match what is expected by
kerneldoc.
Fixes the following W=1 warnings:
drivers/misc/ocxl/config.c:286: warning: Function parameter or member 'dev' not described in 'read_template_version'
drivers/misc/ocxl/config.c:286: warning: Function parameter or member 'fn' not described in 'read_template_version'
drivers/misc/ocxl/config.c:286: warning: Function parameter or member 'len' not described in 'read_template_version'
drivers/misc/ocxl/config.c:286: warning: Function parameter or member 'version' not described in 'read_template_version'
drivers/misc/ocxl/config.c:489: warning: Function parameter or member 'dev' not described in 'read_afu_lpc_memory_info'
drivers/misc/ocxl/config.c:489: warning: Function parameter or member 'fn' not described in 'read_afu_lpc_memory_info'
drivers/misc/ocxl/config.c:489: warning: Function parameter or member 'afu' not described in 'read_afu_lpc_memory_info'
Cc: Frederic Barrat <fbarrat@linux.ibm.com>
Cc: Andrew Donnellan <ajd@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-29-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function headers will need a lot of work before they reach the
standards expected of kerneldoc. Demote them down to basic
comments/headers, for now at least.
Fixes the following W=1 kernel build warnings:
drivers/misc/cxl/hcalls.c:175: warning: Function parameter or member 'unit_address' not described in 'cxl_h_detach_process'
drivers/misc/cxl/hcalls.c:175: warning: Function parameter or member 'process_token' not described in 'cxl_h_detach_process'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'unit_address' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'op' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'p1' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'p2' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'p3' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'p4' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:207: warning: Function parameter or member 'out' not described in 'cxl_h_control_function'
drivers/misc/cxl/hcalls.c:245: warning: Function parameter or member 'unit_address' not described in 'cxl_h_reset_afu'
drivers/misc/cxl/hcalls.c:258: warning: Function parameter or member 'unit_address' not described in 'cxl_h_suspend_process'
drivers/misc/cxl/hcalls.c:258: warning: Function parameter or member 'process_token' not described in 'cxl_h_suspend_process'
drivers/misc/cxl/hcalls.c:271: warning: Function parameter or member 'unit_address' not described in 'cxl_h_resume_process'
drivers/misc/cxl/hcalls.c:271: warning: Function parameter or member 'process_token' not described in 'cxl_h_resume_process'
drivers/misc/cxl/hcalls.c:284: warning: Function parameter or member 'unit_address' not described in 'cxl_h_read_error_state'
drivers/misc/cxl/hcalls.c:284: warning: Function parameter or member 'state' not described in 'cxl_h_read_error_state'
drivers/misc/cxl/hcalls.c:300: warning: Function parameter or member 'unit_address' not described in 'cxl_h_get_afu_err'
drivers/misc/cxl/hcalls.c:300: warning: Function parameter or member 'offset' not described in 'cxl_h_get_afu_err'
drivers/misc/cxl/hcalls.c:300: warning: Function parameter or member 'buf_address' not described in 'cxl_h_get_afu_err'
drivers/misc/cxl/hcalls.c:300: warning: Function parameter or member 'len' not described in 'cxl_h_get_afu_err'
drivers/misc/cxl/hcalls.c:320: warning: Function parameter or member 'unit_address' not described in 'cxl_h_get_config'
drivers/misc/cxl/hcalls.c:320: warning: Function parameter or member 'cr_num' not described in 'cxl_h_get_config'
drivers/misc/cxl/hcalls.c:320: warning: Function parameter or member 'offset' not described in 'cxl_h_get_config'
drivers/misc/cxl/hcalls.c:320: warning: Function parameter or member 'buf_address' not described in 'cxl_h_get_config'
drivers/misc/cxl/hcalls.c:320: warning: Function parameter or member 'len' not described in 'cxl_h_get_config'
drivers/misc/cxl/hcalls.c:333: warning: Function parameter or member 'unit_address' not described in 'cxl_h_terminate_process'
drivers/misc/cxl/hcalls.c:333: warning: Function parameter or member 'process_token' not described in 'cxl_h_terminate_process'
drivers/misc/cxl/hcalls.c:351: warning: Function parameter or member 'unit_address' not described in 'cxl_h_collect_vpd'
drivers/misc/cxl/hcalls.c:351: warning: Function parameter or member 'record' not described in 'cxl_h_collect_vpd'
drivers/misc/cxl/hcalls.c:351: warning: Function parameter or member 'list_address' not described in 'cxl_h_collect_vpd'
drivers/misc/cxl/hcalls.c:351: warning: Function parameter or member 'num' not described in 'cxl_h_collect_vpd'
drivers/misc/cxl/hcalls.c:351: warning: Function parameter or member 'out' not described in 'cxl_h_collect_vpd'
drivers/misc/cxl/hcalls.c:362: warning: Function parameter or member 'unit_address' not described in 'cxl_h_get_fn_error_interrupt'
drivers/misc/cxl/hcalls.c:362: warning: Function parameter or member 'reg' not described in 'cxl_h_get_fn_error_interrupt'
drivers/misc/cxl/hcalls.c:374: warning: Function parameter or member 'unit_address' not described in 'cxl_h_ack_fn_error_interrupt'
drivers/misc/cxl/hcalls.c:374: warning: Function parameter or member 'value' not described in 'cxl_h_ack_fn_error_interrupt'
drivers/misc/cxl/hcalls.c:386: warning: Function parameter or member 'unit_address' not described in 'cxl_h_get_error_log'
drivers/misc/cxl/hcalls.c:386: warning: Function parameter or member 'value' not described in 'cxl_h_get_error_log'
drivers/misc/cxl/hcalls.c:399: warning: Function parameter or member 'unit_address' not described in 'cxl_h_collect_int_info'
drivers/misc/cxl/hcalls.c:399: warning: Function parameter or member 'process_token' not described in 'cxl_h_collect_int_info'
drivers/misc/cxl/hcalls.c:399: warning: Function parameter or member 'info' not described in 'cxl_h_collect_int_info'
drivers/misc/cxl/hcalls.c:440: warning: Function parameter or member 'unit_address' not described in 'cxl_h_control_faults'
drivers/misc/cxl/hcalls.c:440: warning: Function parameter or member 'process_token' not described in 'cxl_h_control_faults'
drivers/misc/cxl/hcalls.c:440: warning: Function parameter or member 'control_mask' not described in 'cxl_h_control_faults'
drivers/misc/cxl/hcalls.c:440: warning: Function parameter or member 'reset_mask' not described in 'cxl_h_control_faults'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'unit_address' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'op' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'p1' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'p2' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'p3' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'p4' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:480: warning: Function parameter or member 'out' not described in 'cxl_h_control_facility'
drivers/misc/cxl/hcalls.c:516: warning: Function parameter or member 'unit_address' not described in 'cxl_h_reset_adapter'
drivers/misc/cxl/hcalls.c:532: warning: Function parameter or member 'unit_address' not described in 'cxl_h_collect_vpd_adapter'
drivers/misc/cxl/hcalls.c:532: warning: Function parameter or member 'list_address' not described in 'cxl_h_collect_vpd_adapter'
drivers/misc/cxl/hcalls.c:532: warning: Function parameter or member 'num' not described in 'cxl_h_collect_vpd_adapter'
drivers/misc/cxl/hcalls.c:532: warning: Function parameter or member 'out' not described in 'cxl_h_collect_vpd_adapter'
drivers/misc/cxl/hcalls.c:561: warning: Function parameter or member 'unit_address' not described in 'cxl_h_download_facility'
drivers/misc/cxl/hcalls.c:561: warning: Function parameter or member 'op' not described in 'cxl_h_download_facility'
drivers/misc/cxl/hcalls.c:561: warning: Function parameter or member 'list_address' not described in 'cxl_h_download_facility'
drivers/misc/cxl/hcalls.c:561: warning: Function parameter or member 'num' not described in 'cxl_h_download_facility'
drivers/misc/cxl/hcalls.c:561: warning: Function parameter or member 'out' not described in 'cxl_h_download_facility'
drivers/misc/cxl/hcalls.c:626: warning: Function parameter or member 'unit_address' not described in 'cxl_h_download_adapter_image'
drivers/misc/cxl/hcalls.c:626: warning: Function parameter or member 'list_address' not described in 'cxl_h_download_adapter_image'
drivers/misc/cxl/hcalls.c:626: warning: Function parameter or member 'num' not described in 'cxl_h_download_adapter_image'
drivers/misc/cxl/hcalls.c:626: warning: Function parameter or member 'out' not described in 'cxl_h_download_adapter_image'
drivers/misc/cxl/hcalls.c:639: warning: Function parameter or member 'unit_address' not described in 'cxl_h_validate_adapter_image'
drivers/misc/cxl/hcalls.c:639: warning: Function parameter or member 'list_address' not described in 'cxl_h_validate_adapter_image'
drivers/misc/cxl/hcalls.c:639: warning: Function parameter or member 'num' not described in 'cxl_h_validate_adapter_image'
Cc: Frederic Barrat <fbarrat@linux.ibm.com>
Cc: Andrew Donnellan <ajd@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-28-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Firstly, for some reason documentation of all 'scifdev' arguments
are missing, so apply those. Also remove 2 descriptions of 'ep'
which appear to document non-existent function arguments.
drivers/misc/mic/scif/scif_rma.c:468: warning: Function parameter or member 'scifdev' not described in 'scif_create_remote_window'
drivers/misc/mic/scif/scif_rma.c:468: warning: Excess function parameter 'ep' description in 'scif_create_remote_window'
drivers/misc/mic/scif/scif_rma.c:510: warning: Excess function parameter 'ep' description in 'scif_destroy_remote_window'
drivers/misc/mic/scif/scif_rma.c:1045: warning: Function parameter or member 'scifdev' not described in 'scif_alloc_req'
drivers/misc/mic/scif/scif_rma.c:1080: warning: Function parameter or member 'scifdev' not described in 'scif_alloc_gnt_rej'
drivers/misc/mic/scif/scif_rma.c:1104: warning: Function parameter or member 'scifdev' not described in 'scif_free_virt'
drivers/misc/mic/scif/scif_rma.c:1142: warning: Function parameter or member 'scifdev' not described in 'scif_recv_reg'
drivers/misc/mic/scif/scif_rma.c:1178: warning: Function parameter or member 'scifdev' not described in 'scif_recv_unreg'
drivers/misc/mic/scif/scif_rma.c:1243: warning: Function parameter or member 'scifdev' not described in 'scif_recv_reg_ack'
drivers/misc/mic/scif/scif_rma.c:1262: warning: Function parameter or member 'scifdev' not described in 'scif_recv_reg_nack'
drivers/misc/mic/scif/scif_rma.c:1280: warning: Function parameter or member 'scifdev' not described in 'scif_recv_unreg_ack'
drivers/misc/mic/scif/scif_rma.c:1299: warning: Function parameter or member 'scifdev' not described in 'scif_recv_unreg_nack'
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-26-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Firstly add missing descriptions for every use of 'scifdev', then
correct incorrect formatting of existing function argument descriptions
changing to the expected format of '@.*: ', finally add missing
description for function argument 'mark'.
Fixes the following W=1 warnings:
drivers/misc/mic/scif/scif_fence.c:19: warning: Function parameter or member 'scifdev' not described in 'scif_recv_mark'
drivers/misc/mic/scif/scif_fence.c:41: warning: Function parameter or member 'scifdev' not described in 'scif_recv_mark_resp'
drivers/misc/mic/scif/scif_fence.c:64: warning: Function parameter or member 'scifdev' not described in 'scif_recv_wait'
drivers/misc/mic/scif/scif_fence.c:101: warning: Function parameter or member 'scifdev' not described in 'scif_recv_wait_resp'
drivers/misc/mic/scif/scif_fence.c:122: warning: Function parameter or member 'scifdev' not described in 'scif_recv_sig_local'
drivers/misc/mic/scif/scif_fence.c:143: warning: Function parameter or member 'scifdev' not described in 'scif_recv_sig_remote'
drivers/misc/mic/scif/scif_fence.c:164: warning: Function parameter or member 'scifdev' not described in 'scif_recv_sig_resp'
drivers/misc/mic/scif/scif_fence.c:515: warning: Function parameter or member 'epd' not described in 'scif_send_fence_signal'
drivers/misc/mic/scif/scif_fence.c:515: warning: Function parameter or member 'roff' not described in 'scif_send_fence_signal'
drivers/misc/mic/scif/scif_fence.c:515: warning: Function parameter or member 'rval' not described in 'scif_send_fence_signal'
drivers/misc/mic/scif/scif_fence.c:515: warning: Function parameter or member 'loff' not described in 'scif_send_fence_signal'
drivers/misc/mic/scif/scif_fence.c:515: warning: Function parameter or member 'lval' not described in 'scif_send_fence_signal'
drivers/misc/mic/scif/scif_fence.c:515: warning: Function parameter or member 'flags' not described in 'scif_send_fence_signal'
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-25-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Firstly demote scif_rma_destroy_tcw()'s header to a standard
comment as no attempt has been made to document any of the
function arguments. Secondly, provide missing description
for 'prot' for scif_register_temp().
Fixes the following W=1 kernel build warnings:
drivers/misc/mic/scif/scif_dma.c:110: warning: Function parameter or member 'mmn' not described in '__scif_rma_destroy_tcw'
drivers/misc/mic/scif/scif_dma.c:110: warning: Function parameter or member 'start' not described in '__scif_rma_destroy_tcw'
drivers/misc/mic/scif/scif_dma.c:110: warning: Function parameter or member 'len' not described in '__scif_rma_destroy_tcw'
drivers/misc/mic/scif/scif_dma.c:344: warning: Function parameter or member 'prot' not described in 'scif_register_temp'
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-24-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Includes; missing descriptions for function args, the promotion
of obvious kerneldoc headers and the mis-formatting of existing
argument descriptions.
Fixes the following W=1 kernel build warnings:
drivers/misc/mic/scif/scif_nm.c:19: warning: Function parameter or member 'node' not described in 'scif_invalidate_ep'
drivers/misc/mic/scif/scif_nm.c:173: warning: Function parameter or member 'node_id' not described in 'scif_disconnect_node'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-23-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Includes; missing function argument documentation, misnamed argument
tags, the promotion of obvious kerneldoc header candidates and an
ordering issue (functions must follow the kerneldoc which describes
them).
Fixes the following W=1 kernel build issues:
drivers/misc/mic/scif/scif_nodeqp.c:452: warning: Function parameter or member 'scifdev' not described in 'scif_node_connect'
drivers/misc/mic/scif/scif_nodeqp.c:730: warning: Function parameter or member 'unused' not described in 'scif_exit'
drivers/misc/mic/scif/scif_nodeqp.c:730: warning: Excess function parameter 'msg' description in 'scif_exit'
drivers/misc/mic/scif/scif_nodeqp.c:748: warning: Function parameter or member 'unused' not described in 'scif_exit_ack'
drivers/misc/mic/scif/scif_nodeqp.c:748: warning: Excess function parameter 'msg' description in 'scif_exit_ack'
drivers/misc/mic/scif/scif_nodeqp.c:939: warning: Function parameter or member 'scifdev' not described in 'scif_node_add_nack'
drivers/misc/mic/scif/scif_nodeqp.c:988: warning: Function parameter or member 'scifdev' not described in 'scif_get_node_info_resp'
drivers/misc/mic/scif/scif_nodeqp.c:1070: warning: cannot understand function prototype: 'int scif_max_msg_id = SCIF_MAX_MSG; '
drivers/misc/mic/scif/scif_nodeqp.c:1129: warning: Function parameter or member 'unused' not described in 'scif_loopb_wq_handler'
drivers/misc/mic/scif/scif_nodeqp.c:1129: warning: Excess function parameter 'work' description in 'scif_loopb_wq_handler'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-22-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For some reason (copy 'n' paste error?) the passed in pointers to
'struct scif_dev scifdev' weren't described throughout the source
file. Change that.
Fixes the following W=1 kernel build warning(s):
drivers/misc/mic/scif/scif_epd.c:120: warning: Function parameter or member 'scifdev' not described in 'scif_cnctreq'
drivers/misc/mic/scif/scif_epd.c:166: warning: Function parameter or member 'scifdev' not described in 'scif_cnctgnt'
drivers/misc/mic/scif/scif_epd.c:191: warning: Function parameter or member 'scifdev' not described in 'scif_cnctgnt_ack'
drivers/misc/mic/scif/scif_epd.c:213: warning: Function parameter or member 'scifdev' not described in 'scif_cnctgnt_nack'
drivers/misc/mic/scif/scif_epd.c:230: warning: Function parameter or member 'scifdev' not described in 'scif_cnctrej'
drivers/misc/mic/scif/scif_epd.c:255: warning: Function parameter or member 'scifdev' not described in 'scif_discnct'
drivers/misc/mic/scif/scif_epd.c:309: warning: Function parameter or member 'scifdev' not described in 'scif_discnt_ack'
drivers/misc/mic/scif/scif_epd.c:325: warning: Function parameter or member 'scifdev' not described in 'scif_clientsend'
drivers/misc/mic/scif/scif_epd.c:341: warning: Function parameter or member 'scifdev' not described in 'scif_clientrcvd'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-21-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The correct format is not used and no attempt has been made
to document the function arguments. Makes sense to just demote
the header back down to a simple comment.
Fixes the following W=1 warnings:
drivers/misc/mic/scif/scif_api.c:739: warning: Function parameter or member 'epd' not described in 'scif_accept'
drivers/misc/mic/scif/scif_api.c:739: warning: Function parameter or member 'peer' not described in 'scif_accept'
drivers/misc/mic/scif/scif_api.c:739: warning: Function parameter or member 'newepd' not described in 'scif_accept'
drivers/misc/mic/scif/scif_api.c:739: warning: Function parameter or member 'flags' not described in 'scif_accept'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-20-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'read_size' appears to have been assigned, but never used since the
SCIF messaging and node enumeration APIs were introduced in 2015.
Makes sense to simply remove it.
Fixes the following W=1 warning:
drivers/misc/mic/scif/scif_api.c: In function ‘_scif_recv’:
drivers/misc/mic/scif/scif_api.c:1000:6: warning: variable ‘read_size’ set but not used [-Wunused-but-set-variable]
1000 | int read_size;
| ^~~~~~~~~
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-19-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The correct format is not used and no attempt has been made
to document the function arguments. Makes sense to just demote
the header back down to a simple comment.
Fixes the following W=1 warnings:
drivers/misc/mic/cosm/cosm_debugfs.c:25: warning: Function parameter or member 's' not described in 'log_buf_show'
drivers/misc/mic/cosm/cosm_debugfs.c:25: warning: Function parameter or member 'unused' not described in 'log_buf_show'
drivers/misc/mic/cosm/cosm_debugfs.c:78: warning: Function parameter or member 's' not described in 'force_reset_show'
drivers/misc/mic/cosm/cosm_debugfs.c:78: warning: Function parameter or member 'pos' not described in 'force_reset_show'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-18-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
__scif_get_port() has never taken 'port' as an argument since
its inception back in 2015. Probably document the proper arguments
expected 'start' and 'end'.
Fixes the following W=1 kernel build warnings:
drivers/misc/mic/scif/scif_ports.c:36: warning: Function parameter or member 'start' not described in '__scif_get_port
drivers/misc/mic/scif/scif_ports.c:36: warning: Function parameter or member 'end' not described in '__scif_get_port'
drivers/misc/mic/scif/scif_ports.c:36: warning: Excess function parameter 'port' description in '__scif_get_port'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-17-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning:
drivers/misc/mic/cosm/cosm_main.c:31: warning: Function parameter or member 'force' not described in 'cosm_hw_reset'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-16-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The correct format is not used and no attempt has been made
to document the function arguments. Makes sense to just demote
the headers back down to simple comments.
Fixes the following W=1 warnings:
drivers/misc/mic/host/mic_debugfs.c:108: warning: Function parameter or member 'mdev' not described in 'mic_create_debug_dir'
drivers/misc/mic/host/mic_debugfs.c:131: warning: Function parameter or member 'mdev' not described in 'mic_delete_debug_dir'
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-15-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The correct format is not used and no attempt has been made
to document the function arguments. Makes sense to just demote
the headers back down to simple comments.
Fixes the following W=1 warnings:
drivers/misc/mic/card/mic_debugfs.c:31: warning: Function parameter or member 's' not described in 'mic_intr_show'
drivers/misc/mic/card/mic_debugfs.c:31: warning: Function parameter or member 'unused' not described in 'mic_intr_show'
drivers/misc/mic/card/mic_debugfs.c:53: warning: Function parameter or member 'mdrv' not described in 'mic_create_card_debug_dir'
drivers/misc/mic/card/mic_debugfs.c:67: warning: Function parameter or member 'mdrv' not described in 'mic_delete_card_debug_dir'
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-14-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 warnings:
drivers/misc/mic/host/mic_x100.c:127: warning: Function parameter or member 'doorbell' not described in 'mic_x100_send_sbox_intr'
drivers/misc/mic/host/mic_x100.c:148: warning: Function parameter or member 'doorbell' not described in 'mic_x100_send_rdmasr_intr'
drivers/misc/mic/host/mic_x100.c:511: warning: Function parameter or member 'dma_addr' not described in 'mic_x100_smpt_set'
drivers/misc/mic/host/mic_x100.c:511: warning: Function parameter or member 'index' not described in 'mic_x100_smpt_set'
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-13-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mic_interrupt() and mic_setup_msix() have incomplete documentation.
Fixes the following W=1 kernel build warnings:
drivers/misc/mic/host/mic_intr.c:42: warning: Function parameter or member 'irq' not described in 'mic_interrupt'
drivers/misc/mic/host/mic_intr.c:42: warning: Function parameter or member 'dev' not described in 'mic_interrupt'
drivers/misc/mic/host/mic_intr.c:188: warning: Function parameter or member 'pdev' not described in 'mic_setup_msix'
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-12-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The correct format is not used and no attempt has been made
to document the function arguments. Makes sense to just demote
the header back down to a simple comment.
Fixes the following W=1 warnings:
drivers/misc/ibmasm/dot_command.c:18: warning: Function parameter or member 'sp' not described in 'ibmasm_receive_message'
drivers/misc/ibmasm/dot_command.c:18: warning: Function parameter or member 'message' not described in 'ibmasm_receive_message'
drivers/misc/ibmasm/dot_command.c:18: warning: Function parameter or member 'message_size' not described in 'ibmasm_receive_message'
drivers/misc/ibmasm/dot_command.c:55: warning: Function parameter or member 'sp' not described in 'ibmasm_send_driver_vpd'
drivers/misc/ibmasm/dot_command.c:111: warning: Function parameter or member 'sp' not described in 'ibmasm_send_os_state'
drivers/misc/ibmasm/dot_command.c:111: warning: Function parameter or member 'os_state' not described in 'ibmasm_send_os_state'
Cc: "Max Asböck" <amax@us.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-11-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mic_x100_intr_init[] is only ever used in mic_x100.c, so instead
of listing to the compiler complain about unused static arrays
simply move it into the c-file for direct consumption. This way
it can stay 'static'.
Fixes the following W=1 kernel build warning:
In file included from drivers/misc/mic/host/mic_main.c:17:
drivers/misc/mic/host/mic_x100.h:70:18: warning: ‘mic_x100_intr_init’ defined but not used [-Wunused-const-variable=]
70 | static const u16 mic_x100_intr_init[] = {
| ^~~~~~~~~~~~~~~~~~
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-10-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The correct format is not used and no attempt has been made
to document the function arguments. Makes sense to just demote
the header back down to a simple comment.
Fixes the following W=1 warnings:
drivers/misc/ibmasm/r_heartbeat.c:49: warning: Function parameter or member 'sp' not described in 'ibmasm_start_reverse_heartbeat'
drivers/misc/ibmasm/r_heartbeat.c:49: warning: Function parameter or member 'rhb' not described in 'ibmasm_start_reverse_heartbeat'
Cc: "Max Asböck" <amax@us.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-9-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The correct format is not used and no attempt has been made
to document the function arguments. Makes sense to just demote
the header back down to a simple comment.
Fixes the following W=1 warnings:
drivers/misc/ibmasm/command.c:106: warning: Function parameter or member 'sp' not described in 'ibmasm_exec_command'
drivers/misc/ibmasm/command.c:106: warning: Function parameter or member 'cmd' not described in 'ibmasm_exec_command'
drivers/misc/ibmasm/command.c:149: warning: Function parameter or member 'cmd' not described in 'ibmasm_wait_for_response'
drivers/misc/ibmasm/command.c:149: warning: Function parameter or member 'timeout' not described in 'ibmasm_wait_for_response'
drivers/misc/ibmasm/command.c:162: warning: Function parameter or member 'sp' not described in 'ibmasm_receive_command_response'
drivers/misc/ibmasm/command.c:162: warning: Function parameter or member 'response' not described in 'ibmasm_receive_command_response'
drivers/misc/ibmasm/command.c:162: warning: Function parameter or member 'size' not described in 'ibmasm_receive_command_response'
Cc: "Max Asböck" <amax@us.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-7-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The correct format is not used and no attempt has been made
to document the function arguments. Makes sense to just demote
the header back down to a simple comment.
Fixes the following W=1 warnings:
drivers/misc/ibmasm/event.c:44: warning: Function parameter or member 'sp' not described in 'ibmasm_receive_event'
drivers/misc/ibmasm/event.c:44: warning: Function parameter or member 'data' not described in 'ibmasm_receive_event'
drivers/misc/ibmasm/event.c:44: warning: Function parameter or member 'data_size' not described in 'ibmasm_receive_event'
drivers/misc/ibmasm/event.c:78: warning: Function parameter or member 'sp' not described in 'ibmasm_get_next_event'
drivers/misc/ibmasm/event.c:78: warning: Function parameter or member 'reader' not described in 'ibmasm_get_next_event'
Cc: "Max Asböck" <amax@us.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-6-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These functions are not exported and no external prototypes exist
Fixes W=1 kernel build warning(s):
drivers/misc/sgi-xp/xp_main.c:227:1: warning: no previous prototype for ‘xp_init’ [-Wmissing-prototypes]
227 | xp_init(void)
| ^~~~~~~
drivers/misc/sgi-xp/xp_main.c:250:1: warning: no previous prototype for ‘xp_exit’ [-Wmissing-prototypes]
250 | xp_exit(void)
| ^~~~~~~
Cc: Cliff Whickman <cpw@sgi.com>
Cc: Robin Holt <robinmholt@gmail.com>
Cc: Dean Nelson <dcn@sgi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-5-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kerneldoc does not understand file headers. There is therefor
no reason for them to use the syntax.
Fixes the following W=1 kernel build warnings:
drivers/misc/genwqe/card_debugfs.c:30: warning: Function parameter or member 's' not described in 'dbg_uidn_show'
drivers/misc/genwqe/card_debugfs.c:30: warning: Function parameter or member 'regs' not described in 'dbg_uidn_show'
drivers/misc/genwqe/card_debugfs.c:30: warning: Function parameter or member 'entries' not described in 'dbg_uidn_show'
Cc: Michael Jung <mijung@gmx.net>
Cc: Michael Ruettger <michael@ibmra.de>
Cc: Frank Haverkamp <haver@linux.ibm.com>
Cc: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-4-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There has been no attempt to provide documentation for these function's
arguments, so align with the remainder of the file and just treat
them as standards function headers.
Fixes the following W=1 kernel build warnings:
drivers/misc/genwqe/card_sysfs.c:32: warning: cannot understand function prototype: 'const char * const genwqe_types[] = '
drivers/misc/genwqe/card_sysfs.c:150: warning: Function parameter or member 'dev' not described in 'curr_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:150: warning: Function parameter or member 'attr' not described in 'curr_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:150: warning: Function parameter or member 'buf' not described in 'curr_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:166: warning: Function parameter or member 'dev' not described in 'next_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:166: warning: Function parameter or member 'attr' not described in 'next_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:166: warning: Function parameter or member 'buf' not described in 'next_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:271: warning: Function parameter or member 'kobj' not described in 'genwqe_is_visible'
drivers/misc/genwqe/card_sysfs.c:271: warning: Function parameter or member 'attr' not described in 'genwqe_is_visible'
drivers/misc/genwqe/card_sysfs.c:271: warning: Function parameter or member 'n' not described in 'genwqe_is_visible'
Cc: Michael Jung <mijung@gmx.net>
Cc: Michael Ruettger <michael@ibmra.de>
Cc: Frank Haverkamp <haver@linux.ibm.com>
Cc: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-3-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Including; demoting file header from kerneldoc to standard comment/
header, adding a variety of missing function argument documentation,
re-ordering of #defines i.e. not placed between kerneldoc headers
and the functions they are documenting and re-documenting of changed/
renamed arguments.
Fixes the following W=1 kernel build warnings:
drivers/misc/genwqe/card_ddcb.c:83: warning: Function parameter or member 'queue' not described in 'queue_empty'
drivers/misc/genwqe/card_ddcb.c:262: warning: Excess function parameter 'cd' description in 'RET_DDCB_APPENDED'
drivers/misc/genwqe/card_ddcb.c:262: warning: Excess function parameter 'queue' description in 'RET_DDCB_APPENDED'
drivers/misc/genwqe/card_ddcb.c:262: warning: Excess function parameter 'ddcb_no' description in 'RET_DDCB_APPENDED'
drivers/misc/genwqe/card_ddcb.c:329: warning: Function parameter or member 'req' not described in 'copy_ddcb_results'
drivers/misc/genwqe/card_ddcb.c:329: warning: Function parameter or member 'ddcb_no' not described in 'copy_ddcb_results'
drivers/misc/genwqe/card_ddcb.c:364: warning: Function parameter or member 'queue' not described in 'genwqe_check_ddcb_queue'
drivers/misc/genwqe/card_ddcb.c:565: warning: Function parameter or member 'queue' not described in 'get_next_ddcb'
drivers/misc/genwqe/card_ddcb.c:565: warning: Function parameter or member 'num' not described in 'get_next_ddcb'
drivers/misc/genwqe/card_ddcb.c:909: warning: Function parameter or member 'cmd' not described in '__genwqe_execute_raw_ddcb'
drivers/misc/genwqe/card_ddcb.c:909: warning: Excess function parameter 'req' description in '__genwqe_execute_raw_ddcb'
drivers/misc/genwqe/card_ddcb.c:972: warning: Function parameter or member 'cd' not described in 'genwqe_next_ddcb_ready'
drivers/misc/genwqe/card_ddcb.c:1002: warning: Function parameter or member 'cd' not described in 'genwqe_ddcbs_in_flight'
drivers/misc/genwqe/card_ddcb.c:1181: warning: Function parameter or member 'data' not described in 'genwqe_card_thread'
drivers/misc/genwqe/card_ddcb.c:1308: warning: Function parameter or member 'cd' not described in 'queue_wake_up_all'
drivers/misc/genwqe/card_ddcb.c:1333: warning: Function parameter or member 'cd' not described in 'genwqe_finish_queue'
Cc: Michael Jung <mijung@gmx.net>
Cc: Michael Ruettger <michael@ibmra.de>
Cc: Frank Haverkamp <haver@linux.ibm.com>
Cc: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701083118.45744-2-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Including; demoting file header from kerneldoc to standard comment/
header, adding a variety of missing function argument documentation,
repairing formatting (kerneldoc does not like blank lines) and the
demotion of a kerneldoc header which shows no interest in providing
documentation for any of its arguments.
Fixes this the following W=1 issues:
drivers/misc/genwqe/card_utils.c:37: warning: Incorrect use of kernel-doc format: * __genwqe_writeq() - Write 64-bit register
drivers/misc/genwqe/card_utils.c:45: warning: Function parameter or member 'cd' not described in '__genwqe_writeq'
drivers/misc/genwqe/card_utils.c:45: warning: Function parameter or member 'byte_offs' not described in '__genwqe_writeq'
drivers/misc/genwqe/card_utils.c:45: warning: Function parameter or member 'val' not described in '__genwqe_writeq'
drivers/misc/genwqe/card_utils.c:136: warning: Function parameter or member 'cd' not described in 'genwqe_read_app_id'
drivers/misc/genwqe/card_utils.c:136: warning: Function parameter or member 'app_name' not described in 'genwqe_read_app_id'
drivers/misc/genwqe/card_utils.c:136: warning: Function parameter or member 'len' not described in 'genwqe_read_app_id'
drivers/misc/genwqe/card_utils.c:186: warning: bad line:
drivers/misc/genwqe/card_utils.c:290: warning: Function parameter or member 'cd' not described in 'genwqe_alloc_sync_sgl'
drivers/misc/genwqe/card_utils.c:290: warning: Function parameter or member 'sgl' not described in 'genwqe_alloc_sync_sgl'
drivers/misc/genwqe/card_utils.c:290: warning: Function parameter or member 'user_addr' not described in 'genwqe_alloc_sync_sgl'
drivers/misc/genwqe/card_utils.c:290: warning: Function parameter or member 'user_size' not described in 'genwqe_alloc_sync_sgl'
drivers/misc/genwqe/card_utils.c:290: warning: Function parameter or member 'write' not described in 'genwqe_alloc_sync_sgl'
drivers/misc/genwqe/card_utils.c:469: warning: Function parameter or member 'cd' not described in 'genwqe_free_sync_sgl'
drivers/misc/genwqe/card_utils.c:469: warning: Function parameter or member 'sgl' not described in 'genwqe_free_sync_sgl'
drivers/misc/genwqe/card_utils.c:716: warning: Function parameter or member 'count' not described in 'genwqe_set_interrupt_capability'
drivers/misc/genwqe/card_utils.c:747: warning: Function parameter or member 'idx' not described in 'set_reg_idx'
drivers/misc/genwqe/card_utils.c:747: warning: Excess function parameter 'index' description in 'set_reg_idx'
drivers/misc/genwqe/card_utils.c:823: warning: Function parameter or member 'cd' not described in 'genwqe_ffdc_buff_size'
drivers/misc/genwqe/card_utils.c:823: warning: Function parameter or member 'uid' not described in 'genwqe_ffdc_buff_size'
drivers/misc/genwqe/card_utils.c:877: warning: Function parameter or member 'cd' not described in 'genwqe_ffdc_buff_read'
drivers/misc/genwqe/card_utils.c:877: warning: Function parameter or member 'uid' not described in 'genwqe_ffdc_buff_read'
drivers/misc/genwqe/card_utils.c:877: warning: Function parameter or member 'regs' not described in 'genwqe_ffdc_buff_read'
drivers/misc/genwqe/card_utils.c:877: warning: Function parameter or member 'max_regs' not described in 'genwqe_ffdc_buff_read'
drivers/misc/genwqe/card_utils.c:964: warning: Function parameter or member 'cd' not described in 'genwqe_write_vreg'
drivers/misc/genwqe/card_utils.c:964: warning: Function parameter or member 'reg' not described in 'genwqe_write_vreg'
drivers/misc/genwqe/card_utils.c:964: warning: Function parameter or member 'val' not described in 'genwqe_write_vreg'
drivers/misc/genwqe/card_utils.c:964: warning: Function parameter or member 'func' not described in 'genwqe_write_vreg'
drivers/misc/genwqe/card_utils.c:977: warning: Function parameter or member 'cd' not described in 'genwqe_read_vreg'
drivers/misc/genwqe/card_utils.c:977: warning: Function parameter or member 'reg' not described in 'genwqe_read_vreg'
drivers/misc/genwqe/card_utils.c:977: warning: Function parameter or member 'func' not described in 'genwqe_read_vreg'
drivers/misc/genwqe/card_utils.c:995: warning: Function parameter or member 'cd' not described in 'genwqe_base_clock_frequency'
drivers/misc/genwqe/card_utils.c:1012: warning: Function parameter or member 'cd' not described in 'genwqe_stop_traps'
drivers/misc/genwqe/card_utils.c:1022: warning: Function parameter or member 'cd' not described in 'genwqe_start_traps'
Cc: Michael Jung <mijung@gmx.net>
Cc: Michael Ruettger <michael@ibmra.de>
Cc: Frank Haverkamp <haver@linux.ibm.com>
Cc: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Frank Haverkamp <haver@linux.ibm.com>
# Please enter the commit message for your changes. Lines starting
# with '#' will be ignored, and an empty message aborts the commit.
#
# Date: Mon Jun 29 10:30:56 2020 +0100
#
# On branch tb-mfd-fix-warnings
# Changes to be committed:
# modified: drivers/misc/genwqe/card_utils.c
#
# Untracked files:
# qemu-i2c-devs.txt
#
Link: https://lore.kernel.org/r/20200701085853.164358-21-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Including; add missing documentation for function arguments, re-ordering
of #defines i.e. not placed between kerneldoc headers and the functions
they are documenting, demotion of file header/comment from kerneldoc
format and removal of documentation for non-existent args.
Fixes the following W=1 kernel build warnings:
drivers/misc/genwqe/card_dev.c:33: warning: Function parameter or member 'cd' not described in 'genwqe_open_files'
drivers/misc/genwqe/card_dev.c:98: warning: Function parameter or member 'virt_addr' not described in 'genwqe_search_pin'
drivers/misc/genwqe/card_dev.c:98: warning: Excess function parameter 'dma_addr' description in 'genwqe_search_pin'
drivers/misc/genwqe/card_dev.c:154: warning: Function parameter or member 'virt_addr' not described in '__genwqe_search_mapping'
drivers/misc/genwqe/card_dev.c:256: warning: Function parameter or member 'cd' not described in 'genwqe_kill_fasync'
drivers/misc/genwqe/card_dev.c:256: warning: Function parameter or member 'sig' not described in 'genwqe_kill_fasync'
drivers/misc/genwqe/card_dev.c:387: warning: Function parameter or member 'vma' not described in 'genwqe_vma_close'
drivers/misc/genwqe/card_dev.c:430: warning: Function parameter or member 'filp' not described in 'genwqe_mmap'
drivers/misc/genwqe/card_dev.c:430: warning: Function parameter or member 'vma' not described in 'genwqe_mmap'
drivers/misc/genwqe/card_dev.c:495: warning: Excess function parameter 'cd' description in 'FLASH_BLOCK'
drivers/misc/genwqe/card_dev.c:495: warning: Excess function parameter 'load' description in 'FLASH_BLOCK'
drivers/misc/genwqe/card_dev.c:827: warning: Function parameter or member 'cfile' not described in 'ddcb_cmd_cleanup'
drivers/misc/genwqe/card_dev.c:827: warning: Function parameter or member 'req' not described in 'ddcb_cmd_cleanup'
drivers/misc/genwqe/card_dev.c:854: warning: Function parameter or member 'cfile' not described in 'ddcb_cmd_fixups'
drivers/misc/genwqe/card_dev.c:854: warning: Function parameter or member 'req' not described in 'ddcb_cmd_fixups'
drivers/misc/genwqe/card_dev.c:984: warning: Function parameter or member 'cfile' not described in 'genwqe_execute_ddcb'
drivers/misc/genwqe/card_dev.c:984: warning: Function parameter or member 'cmd' not described in 'genwqe_execute_ddcb'
drivers/misc/genwqe/card_dev.c:1350: warning: Function parameter or member 'cd' not described in 'genwqe_device_remove'
Cc: Michael Jung <mijung@gmx.net>
Cc: Michael Ruettger <michael@ibmra.de>
Cc: Frank Haverkamp <haver@linux.ibm.com>
Cc: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Frank Haverkamp <haver@linux.ibm.com>
Link: https://lore.kernel.org/r/20200701085853.164358-20-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>From missing documentation for function arguments, to promotion
obvious kerneldoc headers and incorrectly named arguments.
Fixes the following W=1 warnings:
drivers/misc/genwqe/card_base.c:175: warning: Function parameter or member 'cd' not described in 'genwqe_bus_reset'
drivers/misc/genwqe/card_base.c:272: warning: Function parameter or member 'cd' not described in 'genwqe_recovery_on_fatal_gfir_required'
drivers/misc/genwqe/card_base.c:293: warning: Function parameter or member 'cd' not described in 'genwqe_T_psec'
drivers/misc/genwqe/card_base.c:314: warning: Function parameter or member 'cd' not described in 'genwqe_setup_pf_jtimer'
drivers/misc/genwqe/card_base.c:334: warning: Function parameter or member 'cd' not described in 'genwqe_setup_vf_jtimer'
drivers/misc/genwqe/card_base.c:557: warning: Function parameter or member 'cd' not described in 'genwqe_stop'
drivers/misc/genwqe/card_base.c:617: warning: Function parameter or member 'cd' not described in 'genwqe_fir_checking'
drivers/misc/genwqe/card_base.c:760: warning: Function parameter or member 'pci_dev' not described in 'genwqe_pci_fundamental_reset'
drivers/misc/genwqe/card_base.c:889: warning: Function parameter or member 'data' not described in 'genwqe_health_thread'
drivers/misc/genwqe/card_base.c:1046: warning: Function parameter or member 'cd' not described in 'genwqe_pci_setup'
drivers/misc/genwqe/card_base.c:1131: warning: Function parameter or member 'cd' not described in 'genwqe_pci_remove'
drivers/misc/genwqe/card_base.c:1151: warning: Function parameter or member 'pci_dev' not described in 'genwqe_probe'
drivers/misc/genwqe/card_base.c:1151: warning: Function parameter or member 'id' not described in 'genwqe_probe'
drivers/misc/genwqe/card_base.c:1151: warning: Excess function parameter 'pdev' description in 'genwqe_probe'
drivers/misc/genwqe/card_base.c:1207: warning: Function parameter or member 'pci_dev' not described in 'genwqe_remove'
drivers/misc/genwqe/card_base.c:1336: warning: Function parameter or member 'dev' not described in 'genwqe_devnode'
drivers/misc/genwqe/card_base.c:1336: warning: Function parameter or member 'mode' not described in 'genwqe_devnode'
Cc: Michael Jung <mijung@gmx.net>
Cc: Michael Ruettger <michael@ibmra.de>
Cc: Frank Haverkamp <haver@linux.ibm.com>
Cc: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Frank Haverkamp <haver@linux.ibm.com>
Link: https://lore.kernel.org/r/20200701085853.164358-19-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
genwqe_recover_card()'s function arguments were missing from its
kerneldoc header. Provide descriptions for 'cd' and 'fatal_err'.
Fixes the following kernel build W=1 warning:
drivers/misc/genwqe/card_base.c:588: warning: Function parameter or member 'cd' not described in 'genwqe_recover_card'
drivers/misc/genwqe/card_base.c:588: warning: Function parameter or member 'fatal_err' not described in 'genwqe_recover_card'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Frank Haverkamp <haver@linux.ibm.com>
Link: https://lore.kernel.org/r/20200701085853.164358-18-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variable 'rc' hasn't been checked since the driver's inception
in 2013. If it hasn't caused any issues since then, it's unlikely
to in the future. Let's take it out for now.
Fixes the following W=1 kernel build warning(s):
drivers/misc/genwqe/card_base.c: In function ‘genwqe_health_check_stop’:
/home/lee/projects/linux/kernel/drivers/misc/genwqe/card_base.c:1046:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
1046 | int rc;
| ^~
Cc: Michael Jung <mijung@gmx.net>
Cc: Michael Ruettger <michael@ibmra.de>
Cc: Frank Haverkamp <haver@linux.ibm.com>
Cc: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Frank Haverkamp <haver@linux.ibm.com>
Link: https://lore.kernel.org/r/20200701085853.164358-17-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
enclosure_remove_device() hasn't taken an 'int component for over a decade.
Instead use kerneldoc to describe the 'struct device' actually passed in.
Fixes the following W=1 kernel build warning(s):
drivers/misc/enclosure.c:400: warning: Function parameter or member 'dev' not described in 'enclosure_remove_device'
drivers/misc/enclosure.c:400: warning: Excess function parameter 'num' description in 'enclosure_remove_device'
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701085853.164358-16-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Probably a copy 'n' paste error, 'offset_address' has never been
part of the pch_phub_{read,write}_gbe_mac_addr() functions.
Squashes the following W=1 warnings:
drivers/misc/pch_phub.c:450: warning: Excess function parameter 'offset_address' description in 'pch_phub_read_gbe_mac_addr'
drivers/misc/pch_phub.c:462: warning: Excess function parameter 'offset_address' description in 'pch_phub_write_gbe_mac_addr'
Cc: Masayuki Ohtak <masa-korg@dsn.okisemi.com>
Cc: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701085853.164358-15-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For some reason (probably copy 'n' paste) kerneldoc descriptions
were missing for all instances of 'chip'. Providing them squashes
the following W=1 kernel build warnings:
drivers/misc/pch_phub.c:145: warning: Function parameter or member 'chip' not described in 'pch_phub_read_modify_write_reg'
drivers/misc/pch_phub.c:282: warning: Function parameter or member 'chip' not described in 'pch_phub_read_serial_rom'
drivers/misc/pch_phub.c:296: warning: Function parameter or member 'chip' not described in 'pch_phub_write_serial_rom'
drivers/misc/pch_phub.c:334: warning: Function parameter or member 'chip' not described in 'pch_phub_read_serial_rom_val'
drivers/misc/pch_phub.c:350: warning: Function parameter or member 'chip' not described in 'pch_phub_write_serial_rom_val'
drivers/misc/pch_phub.c:450: warning: Function parameter or member 'chip' not described in 'pch_phub_read_gbe_mac_addr'
drivers/misc/pch_phub.c:462: warning: Function parameter or member 'chip' not described in 'pch_phub_write_gbe_mac_addr'
Cc: Masayuki Ohtak <masa-korg@dsn.okisemi.com>
Cc: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701085853.164358-14-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's odd for the return value to be assigned to a variable so many
times, but never actually checked, but this has been the case since
the driver's inception in 2012. If it hasn't caused any issues by
now, it's probably unlikely to. Let's take it out, at least until
someone finds a reason to start using it.
Fixes the following W=1 kernel build warning:
drivers/misc/lattice-ecp3-config.c: In function ‘firmware_load’:
drivers/misc/lattice-ecp3-config.c:70:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
70 | int ret;
| ^~~
Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701085853.164358-13-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Firstly some missing function argument documentation, then some
whch are present, but are incorrectly named.
Fixes the following W=1 kernel build warnings:
drivers/misc/enclosure.c:115: warning: Function parameter or member 'name' not described in 'enclosure_register'
drivers/misc/enclosure.c:115: warning: Function parameter or member 'cb' not described in 'enclosure_register'
drivers/misc/enclosure.c:283: warning: Function parameter or member 'number' not described in 'enclosure_component_alloc'
drivers/misc/enclosure.c:283: warning: Excess function parameter 'num' description in 'enclosure_component_alloc'
drivers/misc/enclosure.c:363: warning: Function parameter or member 'component' not described in 'enclosure_add_device'
drivers/misc/enclosure.c:363: warning: Excess function parameter 'num' description in 'enclosure_add_device'
drivers/misc/enclosure.c:398: warning: Function parameter or member 'dev' not described in 'enclosure_remove_device'
drivers/misc/enclosure.c:398: warning: Excess function parameter 'num' description in 'enclosure_remove_device'
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701085853.164358-12-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gaudi_pb_set_block()'s argument 'base' was incorrectly named 'block' in
its function header.
Fixes the following W=1 kernel build warning(s):
drivers/misc/habanalabs/gaudi/gaudi_security.c:454: warning: Function parameter or member 'base' not described in 'gaudi_pb_set_block'
drivers/misc/habanalabs/gaudi/gaudi_security.c:454: warning: Excess function parameter 'block' description in 'gaudi_pb_set_block'
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Link: https://lore.kernel.org/r/20200701085853.164358-11-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
W=1 kernel builds report a lack of description of gaudi_set_asic_funcs()'s
'hdev' argument. In reality it is documented, but the formatting
was not as expected '@.*:'. Instead, there was a misplaced asterisk
which was confusing the kerneldoc validator.
Squashes the following W=1 warning:
drivers/misc/habanalabs/gaudi/gaudi.c:6746: warning: Function parameter or member 'hdev' not described in 'gaudi_set_asic_funcs'
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Link: https://lore.kernel.org/r/20200701085853.164358-10-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No attempt to check the return value of RREG32() has been made
since the call was introduced a year ago.
Fixes W=1 kernel build warning:
drivers/misc/habanalabs/goya/goya_coresight.c: In function ‘goya_debug_coresight’:
drivers/misc/habanalabs/goya/goya_coresight.c:643:6: warning: variable ‘val’ set but not used [-Wunused-but-set-variable]
643 | u32 val;
| ^~~
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Link: https://lore.kernel.org/r/20200701085853.164358-9-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'dma_mask' is not passed directly into hl_pci_set_dma_mask() as
an argument. Instead, it is pulled from struct hl_device *hdev.
Fixed the following W=1 warning:
drivers/misc/habanalabs/pci.c:328: warning: Excess function parameter 'dma_mask' description in 'hl_pci_set_dma_mask
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Link: https://lore.kernel.org/r/20200701085853.164358-8-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Seeing as 'addr' is unsigned, it would be impossible for the assigned
value to be anything other than zero or positive.
Squashes the following W=1 warnings:
drivers/misc/habanalabs/goya/goya.c: In function ‘goya_debugfs_read32’:
drivers/misc/habanalabs/goya/goya.c:3945:19: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
3945 | } else if ((addr >= DRAM_PHYS_BASE) &&
| ^~
drivers/misc/habanalabs/goya/goya.c: In function ‘goya_debugfs_write32’:
drivers/misc/habanalabs/goya/goya.c:4002:19: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
4002 | } else if ((addr >= DRAM_PHYS_BASE) &&
| ^~
drivers/misc/habanalabs/goya/goya.c: In function ‘goya_debugfs_read64’:
drivers/misc/habanalabs/goya/goya.c:4047:19: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
4047 | } else if ((addr >= DRAM_PHYS_BASE) &&
| ^~
drivers/misc/habanalabs/goya/goya.c: In function ‘goya_debugfs_write64’:
drivers/misc/habanalabs/goya/goya.c:4091:19: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
4091 | } else if ((addr >= DRAM_PHYS_BASE) &&
| ^~
drivers/misc/habanalabs/pci.c:328: warning: Excess function parameter 'dma_mask' description in 'hl_pci_set_dma_mask'
drivers/misc/habanalabs/goya/goya_coresight.c: In function ‘goya_debug_coresight’:
drivers/misc/habanalabs/goya/goya_coresight.c:643:6: warning: variable ‘val’ set but not used [-Wunused-but-set-variable]
643 | u32 val;
| ^~~
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Link: https://lore.kernel.org/r/20200701085853.164358-7-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
W=1 kernel builds report a lack of descriptions for various
function arguments. In reality they are documented, but the
formatting was not as expected '@.*:'. Instead, '-'s were
used as separators.
While we're here, the headers for functions various functions
were written in kerneldoc format, but lack the kerneldoc
identifier '/**'. Let's promote them so they can gain access
to the checker.
This change fixes the following W=1 warnings:
drivers/misc/habanalabs/irq.c:24: warning: Function parameter or member 'eq_work' not described in 'hl_eqe_work'
drivers/misc/habanalabs/irq.c:24: warning: Function parameter or member 'hdev' not described in 'hl_eqe_work'
drivers/misc/habanalabs/irq.c:24: warning: Function parameter or member 'eq_entry' not described in 'hl_eqe_work'
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Link: https://lore.kernel.org/r/20200701085853.164358-6-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hl_pci_bars_map() has a miss-typed argument name in the function
description. hl_pci_elbi_write() was missing documented arguments.
The headers for functions hl_pci_bars_unmap(), hl_pci_elbi_write()
and hl_pci_reset_link_through_bridge() were written in kerneldoc
format, but lack the kerneldoc identifier '/**'. Let's promote
them so they can gain access to the checker.
These changes fix the following W=1 kernel build warnings:
drivers/misc/habanalabs/pci.c:27: warning: Function parameter or member 'name' not described in 'hl_pci_bars_map'
drivers/misc/habanalabs/pci.c:27: warning: Excess function parameter 'bar_name' description in 'hl_pci_bars_map'
drivers/misc/habanalabs/pci.c:147: warning: Function parameter or member 'addr' not described in 'hl_pci_iatu_write'
drivers/misc/habanalabs/pci.c:147: warning: Function parameter or member 'data' not described in 'hl_pci_iatu_write'
drivers/misc/habanalabs/pci.c:324: warning: Excess function parameter 'dma_mask' description in 'hl_pci_set_dma_mask'
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Link: https://lore.kernel.org/r/20200701085853.164358-5-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Looks as though documentation for these function arguments have
been missing since the driver's inception last year.
Fixes the following W=1 kernel build warnings:
drivers/misc/habanalabs/firmware_if.c:26: warning: Function parameter or member 'fw_name' not described in 'hl_fw_load_fw_to_device'
drivers/misc/habanalabs/firmware_if.c:26: warning: Function parameter or member 'dst' not described in 'hl_fw_load_fw_to_device'
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Link: https://lore.kernel.org/r/20200701085853.164358-4-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kerneldoc tooling/parsers/validators get confused if non-
standard formatting is used. The first line after the kerneldoc
identifier '/**' must not be blank else the following warnings
will be issued:
drivers/misc/pti.c:902: warning: Cannot understand *
on line 902 - I thought it was a doc line
Cc: J Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701085853.164358-3-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
W=1 kernel builds report a lack of descriptions for various
function arguments. In reality they are documented, but the
formatting was not as expected '@.*:'. Instead, '-'s were
used as separators.
This change fixes the following warnings:
drivers/misc/pti.c:748: warning: Function parameter or member 'port' not described in 'pti_port_activate'
drivers/misc/pti.c:748: warning: Function parameter or member 'tty' not described in 'pti_port_activate'
drivers/misc/pti.c:765: warning: Function parameter or member 'port' not described in 'pti_port_shutdown'
drivers/misc/pti.c:793: warning: Function parameter or member 'pdev' not described in 'pti_pci_probe'
drivers/misc/pti.c:793: warning: Function parameter or member 'ent' not described in 'pti_pci_probe'
Cc: J Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200701085853.164358-2-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The header file linux/uio.h includes crypto/hash.h which pulls in
most of the Crypto API. Since linux/uio.h is used throughout the
kernel this means that every tiny bit of change to the Crypto API
causes the entire kernel to get rebuilt.
This patch fixes this by moving it into lib/iov_iter.c instead
where it is actually used.
This patch also fixes the ifdef to use CRYPTO_HASH instead of just
CRYPTO which does not guarantee the existence of ahash.
Unfortunately a number of drivers were relying on linux/uio.h to
provide access to linux/slab.h. This patch adds inclusions of
linux/slab.h as detected by build failures.
Also skbuff.h was relying on this to provide a declaration for
ahash_request. This patch adds a forward declaration instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It's not needed to set driver to NULL in mei_cl_device_remove()
which is bus_type remove() handler as this is done anyway
in __device_release_driver().
Actually this is causing an endless loop in driver_detach()
on ubuntu patched kernel, while removing (rmmod) the mei_hdcp module.
The reason list_empty(&drv->p->klist_devices.k_list) is always not-empty.
as the check is always true in __device_release_driver()
if (dev->driver != drv)
return;
The non upstream patch is causing this behavior, titled:
'vfio -- release device lock before userspace requests'
Nevertheless the fix is correct also for the upstream.
Link: https://patchwork.ozlabs.org/project/ubuntu-kernel/patch/20180912085046.3401-2-apw@canonical.com/
Cc: <stable@vger.kernel.org>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200628225359.2185929-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The API has moved on since the original function header was
authored. This changes brings the function's documentation
back into line with reality, complete descriptions of the
latest arguments to be used.
Squashes the following W=1 kernel build warnings:
drivers/misc/pti.c:510: warning: Function parameter or member 'tty' not described in 'pti_tty_driver_wr
drivers/misc/pti.c:510: warning: Function parameter or member 'buf' not described in 'pti_tty_driver_wr
drivers/misc/pti.c:510: warning: Excess function parameter 'filp' description in 'pti_tty_driver_write'
drivers/misc/pti.c:510: warning: Excess function parameter 'data' description in 'pti_tty_driver_write'
Cc: J Freyensee <james_p_freyensee@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200626130525.389469-11-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In kerneldoc format, data structures have to start with 'struct'
else the kerneldoc tooling/parsers/validators get confused.
Squashes the following W=1 warning:
drivers/misc/habanalabs/irq.c:19: warning: cannot understand function prototype: 'struct hl_eqe_work '
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200626130525.389469-10-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An attempt was made to provide a proper kerneldoc header for
cb710_sg_dwiter_write_next_block(), but a description for it's 'data'
argument was missed.
Squashes W=1 kernel build warning:
drivers/misc/cb710/sgbuf2.c:131: warning: Function parameter or member 'data' not described in 'cb710_sg_dwiter_write_next_block'
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200626130525.389469-9-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hasn't been checked since its conception 2 years ago.
Squashes W=1 warning:
drivers/misc/mic/vop/vop_main.c: In function ‘_vop_scan_devices’:
drivers/misc/mic/vop/vop_main.c:617:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
617 | int ret;
| ^~~
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200626130525.389469-8-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Copy-paste issue. Looks like the kerneldoc style descriptions for
these functions were taken from existing functions with slightly
different argument names.
Fixes the following W=1 warnings:
drivers/misc/eeprom/eeprom_93cx6.c:239: warning: Function parameter or member 'byte' not described in 'eeprom_93cx6_readb'
drivers/misc/eeprom/eeprom_93cx6.c:239: warning: Excess function parameter 'word' description in 'eeprom_93cx6_readb'
drivers/misc/eeprom/eeprom_93cx6.c:280: warning: Function parameter or member 'bytes' not described in 'eeprom_93cx6_multireadb'
drivers/misc/eeprom/eeprom_93cx6.c:280: warning: Excess function parameter 'words' description in 'eeprom_93cx6_multireadb'
Cc: Wolfram Sang <wsa@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200626130525.389469-7-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The result may not be intereresting, but not using a set variable
is bad form and causes W=1 kernel builds to complain.
Fixes the following W=1 warning(s):
drivers/misc/lkdtm/bugs.c: In function ‘lkdtm_STACK_GUARD_PAGE_LEADING’:
drivers/misc/lkdtm/bugs.c:331:25: warning: variable ‘byte’ set but not used [-Wunused-but-set-variable]
331 | volatile unsigned char byte;
| ^~~~
drivers/misc/lkdtm/bugs.c: In function ‘lkdtm_STACK_GUARD_PAGE_TRAILING’:
drivers/misc/lkdtm/bugs.c:345:25: warning: variable ‘byte’ set but not used [-Wunused-but-set-variable]
345 | volatile unsigned char byte;
| ^~~~
Cc: Kees Cook <keescook@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200626130525.389469-5-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If it's still in use and worth the effort, it sure looks like
this driver could do with a good scrub (clean).
This patch conserns itself with the non-standard comments located
thoughout the file.
It also fixes the following W=1 warnings by demoting the kerneldoc
function headers to standard comments, since there doesn't appear
to be a requirement for the function args to be documented:
/drivers/misc/ti-st/st_kim.c:42: warning: Function parameter or member 'id' not described in 'st_get_plat_device'
/drivers/misc/ti-st/st_kim.c:53: warning: Function parameter or member 'kim_gdata' not described in 'validate_firmware_response'
/drivers/misc/ti-st/st_kim.c:126: warning: Function parameter or member 'kim_gdata' not described in 'kim_int_recv'
/drivers/misc/ti-st/st_kim.c:126: warning: Function parameter or member 'data' not described in 'kim_int_recv'
/drivers/misc/ti-st/st_kim.c:126: warning: Function parameter or member 'count' not described in 'kim_int_recv'
/drivers/misc/ti-st/st_kim.c:272: warning: Function parameter or member 'kim_gdata' not described in 'download_firmware'
/drivers/misc/ti-st/st_kim.c:445: warning: Function parameter or member 'kim_data' not described in 'st_kim_start'
/drivers/misc/ti-st/st_kim.c:509: warning: Function parameter or member 'kim_data' not described in 'st_kim_stop'
/drivers/misc/ti-st/st_kim.c:661: warning: Function parameter or member 'core_data' not described in 'st_kim_ref'
/drivers/misc/ti-st/st_kim.c:661: warning: Function parameter or member 'id' not described in 'st_kim_ref'
Cc: Pavan Savoy <pavan_savoy@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200626130525.389469-4-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If it's still in use and worth the effort, it sure looks like
this driver could do with a good scrub (clean).
This patch conserns itself with the non-standard comments located
thoughout the file.
It also fixes the following W=1 warnings by demoting the kerneldoc
function headers to standard comments, since there doesn't appear
to be a requirement for the function args to be documented:
drivers/misc/ti-st/st_core.c:132: warning: Function parameter or member 'st_gdata' not described in 'st_reg_complete'
drivers/misc/ti-st/st_core.c:132: warning: Function parameter or member 'err' not described in 'st_reg_complete'
drivers/misc/ti-st/st_core.c:197: warning: Function parameter or member 'st_gdata' not described in 'st_wakeup_ack'
drivers/misc/ti-st/st_core.c:197: warning: Function parameter or member 'cmd' not described in 'st_wakeup_ack'
drivers/misc/ti-st/st_core.c:226: warning: Function parameter or member 'disc_data' not described in 'st_int_recv'
drivers/misc/ti-st/st_core.c:226: warning: Function parameter or member 'data' not described in 'st_int_recv'
drivers/misc/ti-st/st_core.c:226: warning: Function parameter or member 'count' not described in 'st_int_recv'
drivers/misc/ti-st/st_core.c:387: warning: Function parameter or member 'st_gdata' not described in 'st_int_dequeue'
drivers/misc/ti-st/st_core.c:409: warning: Function parameter or member 'st_gdata' not described in 'st_int_enqueue'
drivers/misc/ti-st/st_core.c:409: warning: Function parameter or member 'skb' not described in 'st_int_enqueue'
Cc: Pavan Savoy <pavan_savoy@ti.com>
Cc: Naveen Jain <naveen_jain@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200626130525.389469-3-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need to ensure there's a place for the NULL terminator.
Fixes the following W=1 warning(s):
In file included from include/linux/bitmap.h:9,
from include/linux/nodemask.h:95,
from include/linux/mmzone.h:17,
from include/linux/gfp.h:6,
from include/linux/umh.h:4,
from include/linux/kmod.h:9,
from include/linux/module.h:16,
from drivers/misc/c2port/core.c:9:
In function ‘strncpy’,
inlined from ‘c2port_device_register’ at drivers/misc/c2port/core.c:926:2:
include/linux/string.h:297:30: warning: ‘__builtin_strncpy’ specified bound 32 equals destination size [-Wstringop-truncation]
297 | #define __underlying_strncpy __builtin_strncpy
| ^
include/linux/string.h:307:9: note: in expansion of macro ‘__underlying_strncpy’
307 | return __underlying_strncpy(p, q, size);
| ^~~~~~~~~~~~~~~~~~~~
Cc: Rodolfo Giometti <giometti@linux.it>
Cc: "Eurotech S.p.A" <info@eurotech.it>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200626130525.389469-2-lee.jones@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drivers should not use legacy power management as they have to manage power
states and related operations, for the device, themselves. This driver was
handling them with the help of PCI helper functions like
pci_save/restore_state(), pci_enable/disable_device(), etc.
With generic PM, all essentials will be handled by the PCI core. Driver
needs to do only device-specific operations.
The driver was also using pci_enable_wake(...,..., 0) to disable wake. Use
device_wakeup_disable() instead. It was also saving device register
configuration using pch_phub_save/restore_reg_conf() which is not
recommended.
Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Link: https://lore.kernel.org/r/20200629081531.214734-6-vaibhavgupta40@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the support of generic PM callbacks, drivers no longer need to use
legacy .suspend() and .resume() in which they had to maintain PCI states
changes and device's power state themselves. All required operations are
done by PCI core.
Driver needs to do only device-specific operations.
Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Link: https://lore.kernel.org/r/20200629081531.214734-5-vaibhavgupta40@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drivers should not use legacy power management as they have to manage power
states and related operations, for the device, themselves. This driver was
handling them with the help of PCI helper functions like
pci_save/restore_state(), pci_enable/disable_device(), etc.
With generic PM, all essentials will be handled by the PCI core. Driver
needs to do only device-specific operations.
The driver was also using pci_enable_wake(...,..., 0) to disable wake. Use
device_wakeup_disable() instead.
Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Link: https://lore.kernel.org/r/20200629081531.214734-4-vaibhavgupta40@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drivers should not use legacy power management as they have to manage power
states and related operations, for the device, themselves. This driver was
handling them with the help of PCI helper functions like
pci_save/restore_state(), pci_enable/disable_device(), etc.
With generic PM, all essentials will be handled by the PCI core. Driver
needs to do only device-specific operations.
The driver was also using pci_enable_wake(...,..., 0) to disable wake. Use
device_wakeup_disable() instead.
Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Link: https://lore.kernel.org/r/20200629081531.214734-3-vaibhavgupta40@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drivers should not use legacy power management as they have to manage power
states and related operations, for the device, themselves. This driver was
handling them with the help of PCI helper functions like
pci_save/restore_state(), pci_enable/disable_device(), etc.
With generic PM, all essentials will be handled by the PCI core. Driver
needs to do only device-specific operations.
Compile-tested only.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Link: https://lore.kernel.org/r/20200629081531.214734-2-vaibhavgupta40@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I'd like arch-specific tests to XFAIL when on a mismatched architecture
so that we can more easily compare test coverage across all systems.
Lacking kernel configs or CPU features count as a FAIL, not an XFAIL.
Additionally fixes a build failure under 32-bit UML.
Fixes: b09511c253 ("lkdtm: Add a DOUBLE_FAULT crash type on x86")
Fixes: cea23efb4d ("lkdtm/bugs: Make double-fault test always available")
Fixes: 6cb6982f42 ("lkdtm: arm64: test kernel pointer authentication")
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200625203704.317097-5-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Har har, after I moved the slab freelist pointer into the middle of the
slab, now it looks like the contents are getting poisoned. Adjust the
test to avoid the freelist pointer again.
Fixes: 3202fa62fb ("slub: relocate freelist pointer to middle of object")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200625203704.317097-3-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It seems at least Clang is able to throw away writes it knows are
destined for read-only memory, which makes things like the WRITE_RO test
fail, as the write gets elided. Instead, force the variable to be
volatile, and make similar changes through-out other tests in an effort
to avoid needing to repeat fixing these kinds of problems. Also includes
pr_err() calls in failure paths so that kernel logs are more clear in
the failure case.
Reported-by: Prasad Sodagudi <psodagud@codeaurora.org>
Suggested-by: Sami Tolvanen <samitolvanen@google.com>
Fixes: 9ae113ce5f ("lkdtm: add tests for additional page permissions")
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200625203704.317097-2-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add device ID for Intel Kaby Point PCH (Kabylake) which has
Intel Precise Touch & Stylus IPTS (iTouch).
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200619165121.2145330-6-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add device ID for Intel Sunrise Point PCH (Skylake) which has
Intel Precise Touch & Stylus IPTS (iTouch).
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200619165121.2145330-5-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The quirk_probe there is no writing to pci device hence
we can constify the passed pci_dev pointer.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200619165121.2145330-2-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtsx_usb_usb_ids is never modified and can therefore be made const to
allow the compiler to put it in read-only memory.
Before:
text data bss dec hex filename
21513 4160 128 25801 64c9 drivers/misc/cardreader/rtsx_usb.o
After:
text data bss dec hex filename
21673 4000 128 25801 64c9 drivers/misc/cardreader/rtsx_usb.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20200610224704.27082-2-rikard.falkeborn@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
genwqe_err_handler is never modified, so it can be made const to allow
the compiler to put it in read-only memory.
Before:
text data bss dec hex filename
20174 6104 2464 28742 7046 drivers/misc/genwqe/card_base.o
After:
text data bss dec hex filename
20270 6008 2464 28742 7046 drivers/misc/genwqe/card_base.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20200610224704.27082-3-rikard.falkeborn@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mei_hdcp_tbl[] is never modified and can be made const to allow the
compiler to put it in read-only memory.
Before:
text data bss dec hex filename
15844 5416 0 21260 530c drivers/misc/mei/hdcp/mei_hdcp.o
After:
text data bss dec hex filename
16004 5256 0 21260 530c drivers/misc/mei/hdcp/mei_hdcp.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20200610224704.27082-4-rikard.falkeborn@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vop_vq_config_ops and id_table[] are never modified so make them const
to allow the compiler to put them in read-only memory.
Before:
text data bss dec hex filename
14889 4065 192 19146 4aca drivers/misc/mic/vop/vop_main.o
After:
text data bss dec hex filename
15113 3841 192 19146 4aca drivers/misc/mic/vop/vop_main.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20200610224704.27082-5-rikard.falkeborn@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the error return path from kobject_init_and_add() is not
followed by a call to kobject_put() - which means we are leaking
the kobject.
Fix it by adding a call to kobject_put() in the error path of
kobject_init_and_add().
Fixes: b087e6190d ("cxl: Export optional AFU configuration record in sysfs")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Link: https://lore.kernel.org/r/20200602120733.5943-1-wanghai38@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In GAUDI the current timer value for the hardware to check if it is
in IDLE state is too low. As a result, there are occasions where the H/W
wrongly reports it is not IDLE. The driver checks that before submitting
work on behalf of the driver during initialization, so a false report might
cause the driver to fail during device initialization.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The fence release flow is different if the CS was never submitted. In that
case, we don't have an hw_sob object attached that we need to "put". While
if the CS was aborted, we do need to "put" the hw_sob.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The current timeout is too low for some of the workloads and we see false
errors as a result.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The function name conflicts with a static inline function in
arch/m68k/include/asm/mcfmmu.h
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The PS flow for MMU cache invalidation caused timeouts in stress tests.
Use PS + PI flow so no timeouts should happen whatsoever.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
In Gaudi, the user can't execute scalar load_and_exe on external queue
because it can be a security hole. The driver doesn't parse the commands
being loaded and it can be msg_prot, which the user isn't allowed to use.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Add Tiger Lake device ids H for HECI1.
TGH_H is also used in Tatlow SPS platform we need to
disable the mei interface there.
Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200619165121.2145330-7-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For SPS firmware versions 5.0 and newer the way detection has changed.
The detection is done now via PCI_CFG_HFS_3 register.
To prevent conflict the previous method will get sps_4 suffix
Disable both CNP_H and CNP_H_3 interfaces. CNP_H_3 requires
a separate configuration as it doesn't support DMA.
Cc: <stable@vger.kernel.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200619165121.2145330-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
virtio-mem
doorbell mapping for vdpa
config interrupt support in ifc
fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl7fZ6APHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpkDoIAMcBcQx5su1iuX7vT35xzUWZO478eAf1jOMZ
7KxKUVBeztkcxVFUlRVRu9MR6wOzwHils+1HD6025775Smr5M6x3aJxR6xOORaBj
RoU6OVGkpDvbzsxlhW+xhONz4O7/RkveKJPCwzGjqHrsFeh92lkfTqroz/EuNpw+
LZsO0+DhdUf123HbwHQp5lxW8EjyrRabgeZZg/D9VLPhoCP88vCjRhBXU2GPuaUl
/UNXsQafn4xUgrxPaoN5f4Phn/P46NNrbZ1jmlkw/z/3QhF/DhktGXGaZsIHDCN/
vicUii0or5QLeBsZpMbKko/BIe2xWHxFjkMRhMOMZOfcBb6sMBI=
=auUa
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- virtio-mem: paravirtualized memory hotplug
- support doorbell mapping for vdpa
- config interrupt support in ifc
- fixes all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (40 commits)
vhost/test: fix up after API change
virtio_mem: convert device block size into 64bit
virtio-mem: drop unnecessary initialization
ifcvf: implement config interrupt in IFCVF
vhost: replace -1 with VHOST_FILE_UNBIND in ioctls
vhost_vdpa: Support config interrupt in vdpa
ifcvf: ignore continuous setting same status value
virtio-mem: Don't rely on implicit compiler padding for requests
virtio-mem: Try to unplug the complete online memory block first
virtio-mem: Use -ETXTBSY as error code if the device is busy
virtio-mem: Unplug subblocks right-to-left
virtio-mem: Drop manual check for already present memory
virtio-mem: Add parent resource for all added "System RAM"
virtio-mem: Better retry handling
virtio-mem: Offline and remove completely unplugged memory blocks
mm/memory_hotplug: Introduce offline_and_remove_memory()
virtio-mem: Allow to offline partially unplugged memory blocks
mm: Allow to offline unmovable PageOffline() pages via MEM_GOING_OFFLINE
virtio-mem: Paravirtualized memory hotunplug part 2
virtio-mem: Paravirtualized memory hotunplug part 1
...
The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.
Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: consolidate definitions of page table accessors", v2.
The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once. For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.
Most of these definitions are actually identical and typically it boils
down to, e.g.
static inline unsigned long pmd_index(unsigned long address)
{
return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}
static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}
These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.
For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.
These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.
This patch (of 12):
The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the
functions involving page table manipulations, e.g. pte_alloc() and
pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h>
in the files that include <linux/mm.h>.
The include statements in such cases are remove with a simple loop:
for f in $(git grep -l "include <linux/mm.h>") ; do
sed -i -e '/include <asm\/pgtable.h>/ d' $f
done
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Including:
- A big part of this is a change in how devices get connected to
IOMMUs in the core code. It contains the change from the old
add_device()/remove_device() to the new
probe_device()/release_device() call-backs. As a result
functionality that was previously in the IOMMU drivers has
been moved to the IOMMU core code, including IOMMU group
allocation for each device.
The reason for this change was to get more robust allocation
of default domains for the iommu groups.
A couple of fixes were necessary after this was merged into
the IOMMU tree, but there are no known bugs left. The last fix
is applied on-top of the merge commit for the topic branches.
- Removal of the driver private domain handling in the Intel
VT-d driver. This was fragile code and I am glad it is gone
now.
- More Intel VT-d updates from Lu Baolu:
- Nested Shared Virtual Addressing (SVA) support to the
Intel VT-d driver
- Replacement of the Intel SVM interfaces to the common
IOMMU SVA API
- SVA Page Request draining support
- ARM-SMMU Updates from Will:
- Avoid mapping reserved MMIO space on SMMUv3, so that
it can be claimed by the PMU driver
- Use xarray to manage ASIDs on SMMUv3
- Reword confusing shutdown message
- DT compatible string updates
- Allow implementations to override the default domain
type
- A new IOMMU driver for the Allwinner Sun50i platform
- Support for ATS gets disabled for untrusted devices (like
Thunderbolt devices). This includes a PCI patch, acked by
Bjorn.
- Some cleanups to the AMD IOMMU driver to make more use of
IOMMU core features.
- Unification of some printk formats in the Intel and AMD IOMMU
drivers and in the IOVA code.
- Updates for DT bindings
- A number of smaller fixes and cleanups.
-----BEGIN PGP SIGNATURE-----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=a4z4
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"A big part of this is a change in how devices get connected to IOMMUs
in the core code. It contains the change from the old add_device() /
remove_device() to the new probe_device() / release_device()
call-backs.
As a result functionality that was previously in the IOMMU drivers has
been moved to the IOMMU core code, including IOMMU group allocation
for each device. The reason for this change was to get more robust
allocation of default domains for the iommu groups.
A couple of fixes were necessary after this was merged into the IOMMU
tree, but there are no known bugs left. The last fix is applied on-top
of the merge commit for the topic branches.
Other than that change, we have:
- Removal of the driver private domain handling in the Intel VT-d
driver. This was fragile code and I am glad it is gone now.
- More Intel VT-d updates from Lu Baolu:
- Nested Shared Virtual Addressing (SVA) support to the Intel VT-d
driver
- Replacement of the Intel SVM interfaces to the common IOMMU SVA
API
- SVA Page Request draining support
- ARM-SMMU Updates from Will:
- Avoid mapping reserved MMIO space on SMMUv3, so that it can be
claimed by the PMU driver
- Use xarray to manage ASIDs on SMMUv3
- Reword confusing shutdown message
- DT compatible string updates
- Allow implementations to override the default domain type
- A new IOMMU driver for the Allwinner Sun50i platform
- Support for ATS gets disabled for untrusted devices (like
Thunderbolt devices). This includes a PCI patch, acked by Bjorn.
- Some cleanups to the AMD IOMMU driver to make more use of IOMMU
core features.
- Unification of some printk formats in the Intel and AMD IOMMU
drivers and in the IOVA code.
- Updates for DT bindings
- A number of smaller fixes and cleanups.
* tag 'iommu-updates-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (109 commits)
iommu: Check for deferred attach in iommu_group_do_dma_attach()
iommu/amd: Remove redundant devid checks
iommu/amd: Store dev_data as device iommu private data
iommu/amd: Merge private header files
iommu/amd: Remove PD_DMA_OPS_MASK
iommu/amd: Consolidate domain allocation/freeing
iommu/amd: Free page-table in protection_domain_free()
iommu/amd: Allocate page-table in protection_domain_init()
iommu/amd: Let free_pagetable() not rely on domain->pt_root
iommu/amd: Unexport get_dev_data()
iommu/vt-d: Fix compile warning
iommu/vt-d: Remove real DMA lookup in find_domain
iommu/vt-d: Allocate domain info for real DMA sub-devices
iommu/vt-d: Only clear real DMA device's context entries
iommu: Remove iommu_sva_ops::mm_exit()
uacce: Remove mm_exit() op
iommu/sun50i: Constify sun50i_iommu_ops
iommu/hyper-v: Constify hyperv_ir_domain_ops
iommu/vt-d: Use pci_ats_supported()
iommu/arm-smmu-v3: Use pci_ats_supported()
...
Here is the large set of char/misc driver patches for 5.8-rc1
Included in here are:
- habanalabs driver updates, loads
- mhi bus driver updates
- extcon driver updates
- clk driver updates (approved by the clock maintainer)
- firmware driver updates
- fpga driver updates
- gnss driver updates
- coresight driver updates
- interconnect driver updates
- parport driver updates (it's still alive!)
- nvmem driver updates
- soundwire driver updates
- visorbus driver updates
- w1 driver updates
- various misc driver updates
In short, loads of different driver subsystem updates along with the
drivers as well.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzkHw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yldOwCgus/DgpnI1UL4z+NdBxJrAXtkPmgAn2sgTUea
i5RblCmcVMqvHaGtYkY+
=tScN
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc driver patches for 5.8-rc1
Included in here are:
- habanalabs driver updates, loads
- mhi bus driver updates
- extcon driver updates
- clk driver updates (approved by the clock maintainer)
- firmware driver updates
- fpga driver updates
- gnss driver updates
- coresight driver updates
- interconnect driver updates
- parport driver updates (it's still alive!)
- nvmem driver updates
- soundwire driver updates
- visorbus driver updates
- w1 driver updates
- various misc driver updates
In short, loads of different driver subsystem updates along with the
drivers as well.
All have been in linux-next for a while with no reported issues"
* tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits)
habanalabs: correctly cast u64 to void*
habanalabs: initialize variable to default value
extcon: arizona: Fix runtime PM imbalance on error
extcon: max14577: Add proper dt-compatible strings
extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()'
extcon: remove redundant assignment to variable idx
w1: omap-hdq: print dev_err if irq flags are not cleared
w1: omap-hdq: fix interrupt handling which did show spurious timeouts
w1: omap-hdq: fix return value to be -1 if there is a timeout
w1: omap-hdq: cleanup to add missing newline for some dev_dbg
/dev/mem: Revoke mappings when a driver claims the region
misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages()
misc: xilinx-sdfec: cleanup return value in xsdfec_table_write()
misc: xilinx-sdfec: improve get_user_pages_fast() error handling
nvmem: qfprom: remove incorrect write support
habanalabs: handle MMU cache invalidation timeout
habanalabs: don't allow hard reset with open processes
habanalabs: GAUDI does not support soft-reset
habanalabs: add print for soft reset due to event
habanalabs: improve MMU cache invalidation code
...
- Support for userspace to send requests directly to the on-chip GZIP
accelerator on Power9.
- Rework of our lockless page table walking (__find_linux_pte()) to make it
safe against parallel page table manipulations without relying on an IPI for
serialisation.
- A series of fixes & enhancements to make our machine check handling more
robust.
- Lots of plumbing to add support for "prefixed" (64-bit) instructions on
Power10.
- Support for using huge pages for the linear mapping on 8xx (32-bit).
- Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound driver.
- Removal of some obsolete 40x platforms and associated cruft.
- Initial support for booting on Power10.
- Lots of other small features, cleanups & fixes.
Thanks to:
Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Andrey Abramov,
Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent Abali, Cédric Le
Goater, Chen Zhou, Christian Zigotzky, Christophe JAILLET, Christophe Leroy,
Dmitry Torokhov, Emmanuel Nicolet, Erhard F., Gautham R. Shenoy, Geoff Levand,
George Spelvin, Greg Kurz, Gustavo A. R. Silva, Gustavo Walbon, Haren Myneni,
Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Kees Cook, Leonardo
Bras, Madhavan Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael
Neuling, Michal Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao,
Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram
Pai, Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler, Wolfram
Sang, Xiongfeng Wang.
-----BEGIN PGP SIGNATURE-----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=o0WU
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Support for userspace to send requests directly to the on-chip GZIP
accelerator on Power9.
- Rework of our lockless page table walking (__find_linux_pte()) to
make it safe against parallel page table manipulations without
relying on an IPI for serialisation.
- A series of fixes & enhancements to make our machine check handling
more robust.
- Lots of plumbing to add support for "prefixed" (64-bit) instructions
on Power10.
- Support for using huge pages for the linear mapping on 8xx (32-bit).
- Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound
driver.
- Removal of some obsolete 40x platforms and associated cruft.
- Initial support for booting on Power10.
- Lots of other small features, cleanups & fixes.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan,
Andrey Abramov, Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent
Abali, Cédric Le Goater, Chen Zhou, Christian Zigotzky, Christophe
JAILLET, Christophe Leroy, Dmitry Torokhov, Emmanuel Nicolet, Erhard F.,
Gautham R. Shenoy, Geoff Levand, George Spelvin, Greg Kurz, Gustavo A.
R. Silva, Gustavo Walbon, Haren Myneni, Hari Bathini, Joel Stanley,
Jordan Niethe, Kajol Jain, Kees Cook, Leonardo Bras, Madhavan
Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Michal
Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin,
Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram Pai,
Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher
Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler,
Wolfram Sang, Xiongfeng Wang.
* tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (299 commits)
powerpc/pseries: Make vio and ibmebus initcalls pseries specific
cxl: Remove dead Kconfig options
powerpc: Add POWER10 architected mode
powerpc/dt_cpu_ftrs: Add MMA feature
powerpc/dt_cpu_ftrs: Enable Prefixed Instructions
powerpc/dt_cpu_ftrs: Advertise support for ISA v3.1 if selected
powerpc: Add support for ISA v3.1
powerpc: Add new HWCAP bits
powerpc/64s: Don't set FSCR bits in INIT_THREAD
powerpc/64s: Save FSCR to init_task.thread.fscr after feature init
powerpc/64s: Don't let DT CPU features set FSCR_DSCR
powerpc/64s: Don't init FSCR_DSCR in __init_FSCR()
powerpc/32s: Fix another build failure with CONFIG_PPC_KUAP_DEBUG
powerpc/module_64: Use special stub for _mcount() with -mprofile-kernel
powerpc/module_64: Simplify check for -mprofile-kernel ftrace relocations
powerpc/module_64: Consolidate ftrace code
powerpc/32: Disable KASAN with pages bigger than 16k
powerpc/uaccess: Don't set KUEP by default on book3s/32
powerpc/uaccess: Don't set KUAP by default on book3s/32
powerpc/8xx: Reduce time spent in allow_user_access() and friends
...
One new platform gets added, the Realtek RTD1195, which is an older
Cortex-a7 based relative of the RTD12xx chips that are already supported
in arch/arm64. The platform may also be extended to support running
32-bit kernels on those 64-bit chips for memory-constrained machines.
In the Renesas shmobile platform, we gain support for "RZ/G1H" or R8A7742,
an eight-core chip based on Cortex-A15 and Cortex-A7 cores, originally
released in 2016 as one of the last high-end 32-bit designs.
There is ongoing cleanup for the integrator, tegra, imx, and omap2
platforms, with integrator getting very close to the goal of having
zero code in arch/arm/, and omap2 moving more of the chip specifics
from old board code into device tree files.
The Versatile Express platform is made more modular, with built-in
drivers now becoming loadable modules. This is part of a greater effort
for the Android OS to have a common kernel binary for all platforms and
any platform specific code in loadable modules.
The PXA platform drops support for Compulab's pxa2xx boards that had
rather unusual flash and PCI drivers but no known users remaining.
All device drivers specific to those boards can now get removed as
well.
Across platforms, there is ongoing cleanup, with Geert and Rob
revisiting some a lot of Kconfig options.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=gzCp
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"One new platform gets added, the Realtek RTD1195, which is an older
Cortex-a7 based relative of the RTD12xx chips that are already
supported in arch/arm64. The platform may also be extended to support
running 32-bit kernels on those 64-bit chips for memory-constrained
machines.
In the Renesas shmobile platform, we gain support for "RZ/G1H" or
R8A7742, an eight-core chip based on Cortex-A15 and Cortex-A7 cores,
originally released in 2016 as one of the last high-end 32-bit
designs.
There is ongoing cleanup for the integrator, tegra, imx, and omap2
platforms, with integrator getting very close to the goal of having
zero code in arch/arm/, and omap2 moving more of the chip specifics
from old board code into device tree files.
The Versatile Express platform is made more modular, with built-in
drivers now becoming loadable modules. This is part of a greater
effort for the Android OS to have a common kernel binary for all
platforms and any platform specific code in loadable modules.
The PXA platform drops support for Compulab's pxa2xx boards that had
rather unusual flash and PCI drivers but no known users remaining. All
device drivers specific to those boards can now get removed as well.
Across platforms, there is ongoing cleanup, with Geert and Rob
revisiting some a lot of Kconfig options"
* tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits)
ARM: omap2: fix omap5_realtime_timer_init definition
ARM: zynq: Don't select CONFIG_ICST
ARM: OMAP2+: Fix regression for using local timer on non-SMP SoCs
clk: versatile: Fix kconfig dependency on COMMON_CLK_VERSATILE
ARM: davinci: fix build failure without I2C
power: reset: vexpress: fix build issue
power: vexpress: cleanup: use builtin_platform_driver
power: vexpress: add suppress_bind_attrs to true
Revert "ARM: vexpress: Don't select VEXPRESS_CONFIG"
MAINTAINERS: pxa: remove Compulab arm/pxa support
ARM: pxa: remove Compulab pxa2xx boards
bus: arm-integrator-lm: Fix return value check in integrator_ap_lm_probe()
soc: imx: move cpu code to drivers/soc/imx
ARM: imx: move cpu definitions into a header
ARM: imx: use device_initcall for imx_soc_device_init
ARM: imx: pcm037: make pcm970_sja1000_platform_data static
bus: ti-sysc: Timers no longer need legacy quirk handling
ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter
ARM: dts: Configure system timers for omap2
ARM: dts: Configure system timers for ti81xx
...
- Rework the system-wide PM driver flags to make them easier to
understand and use and update their documentation (Rafael Wysocki,
Alan Stern).
- Allow cpuidle governors to be switched at run time regardless of
the kernel configuration and update the related documentation
accordingly (Hanjun Guo).
- Improve the resume device handling in the user space hibernarion
interface code (Domenico Andreoli).
- Document the intel-speed-select sysfs interface (Srinivas
Pandruvada).
- Make the ACPI code handing suspend to idle print more debug
messages to help diagnose issues with it (Rafael Wysocki).
- Fix a helper routine in the cpufreq core and correct a typo in
the struct cpufreq_driver kerneldoc comment (Rafael Wysocki, Wang
Wenhu).
- Update cpufreq drivers:
* Make the intel_pstate driver start in the passive mode by
default on systems without HWP (Rafael Wysocki).
* Add i.MX7ULP support to the imx-cpufreq-dt driver and add
i.MX7ULP to the cpufreq-dt-platdev blacklist (Peng Fan).
* Convert the qoriq cpufreq driver to a platform one, make the
platform code create a suitable device object for it and add
platform dependencies to it (Mian Yousaf Kaukab, Geert
Uytterhoeven).
* Fix wrong compatible binding in the qcom driver (Ansuel Smith).
* Build the omap driver by default for ARCH_OMAP2PLUS (Anders
Roxell).
* Add r8a7742 SoC support to the dt cpufreq driver (Lad Prabhakar).
- Update cpuidle core and drivers:
* Fix three reference count leaks in error code paths in the
cpuidle core (Qiushi Wu).
* Convert Qualcomm SPM to a generic cpuidle driver (Stephan
Gerhold).
* Fix up the execution order when entering a domain idle state in
the PSCI driver (Ulf Hansson).
- Fix a reference counting issue related to clock management and
clean up two oddities in the PM-runtime framework (Rafael Wysocki,
Andy Shevchenko).
- Add ElkhartLake support to the Intel RAPL power capping driver
and remove an unused local MSR definition from it (Jacob Pan,
Sumeet Pawnikar).
- Update devfreq core and drivers:
* Replace strncpy() with strscpy() in the devfreq core and use
lockdep asserts instead of manual checks for a locked mutex in
it (Dmitry Osipenko, Krzysztof Kozlowski).
* Add a generic imx bus scaling driver and make it register an
interconnect device (Leonard Crestez, Gustavo A. R. Silva).
* Make the cpufreq notifier in the tegra30 driver take boosting
into account and delete an unuseful error message from that
driver (Dmitry Osipenko, Markus Elfring).
- Remove unneeded semicolon from the cpupower code (Zou Wei).
-----BEGIN PGP SIGNATURE-----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=APdj
-----END PGP SIGNATURE-----
Merge tag 'pm-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These rework the system-wide PM driver flags, make runtime switching
of cpuidle governors easier, improve the user space hibernation
interface code, add intel-speed-select interface documentation, add
more debug messages to the ACPI code handling suspend to idle, update
the cpufreq core and drivers, fix a minor issue in the cpuidle core
and update two cpuidle drivers, improve the PM-runtime framework,
update the Intel RAPL power capping driver, update devfreq core and
drivers, and clean up the cpupower utility.
Specifics:
- Rework the system-wide PM driver flags to make them easier to
understand and use and update their documentation (Rafael Wysocki,
Alan Stern).
- Allow cpuidle governors to be switched at run time regardless of
the kernel configuration and update the related documentation
accordingly (Hanjun Guo).
- Improve the resume device handling in the user space hibernarion
interface code (Domenico Andreoli).
- Document the intel-speed-select sysfs interface (Srinivas
Pandruvada).
- Make the ACPI code handing suspend to idle print more debug
messages to help diagnose issues with it (Rafael Wysocki).
- Fix a helper routine in the cpufreq core and correct a typo in the
struct cpufreq_driver kerneldoc comment (Rafael Wysocki, Wang
Wenhu).
- Update cpufreq drivers:
- Make the intel_pstate driver start in the passive mode by
default on systems without HWP (Rafael Wysocki).
- Add i.MX7ULP support to the imx-cpufreq-dt driver and add
i.MX7ULP to the cpufreq-dt-platdev blacklist (Peng Fan).
- Convert the qoriq cpufreq driver to a platform one, make the
platform code create a suitable device object for it and add
platform dependencies to it (Mian Yousaf Kaukab, Geert
Uytterhoeven).
- Fix wrong compatible binding in the qcom driver (Ansuel Smith).
- Build the omap driver by default for ARCH_OMAP2PLUS (Anders
Roxell).
- Add r8a7742 SoC support to the dt cpufreq driver (Lad
Prabhakar).
- Update cpuidle core and drivers:
- Fix three reference count leaks in error code paths in the
cpuidle core (Qiushi Wu).
- Convert Qualcomm SPM to a generic cpuidle driver (Stephan
Gerhold).
- Fix up the execution order when entering a domain idle state in
the PSCI driver (Ulf Hansson).
- Fix a reference counting issue related to clock management and
clean up two oddities in the PM-runtime framework (Rafael Wysocki,
Andy Shevchenko).
- Add ElkhartLake support to the Intel RAPL power capping driver and
remove an unused local MSR definition from it (Jacob Pan, Sumeet
Pawnikar).
- Update devfreq core and drivers:
- Replace strncpy() with strscpy() in the devfreq core and use
lockdep asserts instead of manual checks for a locked mutex in
it (Dmitry Osipenko, Krzysztof Kozlowski).
- Add a generic imx bus scaling driver and make it register an
interconnect device (Leonard Crestez, Gustavo A. R. Silva).
- Make the cpufreq notifier in the tegra30 driver take boosting
into account and delete an unuseful error message from that
driver (Dmitry Osipenko, Markus Elfring).
- Remove unneeded semicolon from the cpupower code (Zou Wei)"
* tag 'pm-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (51 commits)
cpuidle: Fix three reference count leaks
PM: runtime: Replace pm_runtime_callbacks_present()
PM / devfreq: Use lockdep asserts instead of manual checks for locked mutex
PM / devfreq: imx-bus: Fix inconsistent IS_ERR and PTR_ERR
PM / devfreq: Replace strncpy with strscpy
PM / devfreq: imx: Register interconnect device
PM / devfreq: Add generic imx bus scaling driver
PM / devfreq: tegra30: Delete an error message in tegra_devfreq_probe()
PM / devfreq: tegra30: Make CPUFreq notifier to take into account boosting
PM: hibernate: Restrict writes to the resume device
PM: runtime: clk: Fix clk_pm_runtime_get() error path
cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver
ACPI: EC: PM: s2idle: Extend GPE dispatching debug message
ACPI: PM: s2idle: Print type of wakeup debug messages
powercap: RAPL: remove unused local MSR define
PM: runtime: Make clear what we do when conditions are wrong in rpm_suspend()
Documentation: admin-guide: pm: Document intel-speed-select
PM: hibernate: Split off snapshot dev option
PM: hibernate: Incorporate concurrency handling
Documentation: ABI: make current_governer_ro as a candidate for removal
...
The CXL_AFU_DRIVER_OPS and CXL_LIB Kconfig options were added to coordinate
merging of new features. They no longer serve any purpose, so remove them.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200602040341.10152-1-ajd@linux.ibm.com
This reverts commit d085eb8ce7 ("vhost: disable for OABI")
With commit "virtio: force spec specified alignment on types"
in place, we force proper alignment for all structures,
so there's no longer a reason to blacklist OABI.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Pull uaccess/access_ok updates from Al Viro:
"Removals of trivially pointless access_ok() calls.
Note: the fiemap stuff was removed from the series, since they are
duplicates with part of ext4 series carried in Ted's tree"
* 'uaccess.access_ok' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vmci_host: get rid of pointless access_ok()
hfi1: get rid of pointless access_ok()
usb: get rid of pointless access_ok() calls
lpfc_debugfs: get rid of pointless access_ok()
efi_test: get rid of pointless access_ok()
drm_read(): get rid of pointless access_ok()
via-pmu: don't bother with access_ok()
drivers/crypto/ccp/sev-dev.c: get rid of pointless access_ok()
omapfb: get rid of pointless access_ok() calls
amifb: get rid of pointless access_ok() calls
drivers/fpga/dfl-afu-dma-region.c: get rid of pointless access_ok()
drivers/fpga/dfl-fme-pr.c: get rid of pointless access_ok()
cm4000_cs.c cmm_ioctl(): get rid of pointless access_ok()
nvram: drop useless access_ok()
n_hdlc_tty_read(): remove pointless access_ok()
tomoyo_write_control(): get rid of pointless access_ok()
btrfs_ioctl_send(): don't bother with access_ok()
fat_dir_ioctl(): hadn't needed that access_ok() for more than a decade...
dlmfs_file_write(): get rid of pointless access_ok()
get_user_pages_fast() doesn't need the caller to check that.
NB: reachable only from ioctl(2) and only under USER_DS
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The mm_exit() op will be removed from the SVA API. When a process dies
and its mm goes away, the IOMMU driver won't notify device drivers
anymore. Drivers should expect to handle a lot more aborted DMA. On the
upside, it does greatly simplify the queue management.
The uacce_mm struct, that tracks all queues bound to an mm, was only
used by the mm_exit() callback. Remove it.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Link: https://lore.kernel.org/r/20200423125329.782066-2-jean-philippe@linaro.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This code was using get_user_pages*(), in approximately a "Case 1"
scenario (Direct IO), using the categorization from [1]. That means
that it's time to convert the get_user_pages*() + put_page() calls to
pin_user_pages*() + unpin_user_pages() calls.
There is some helpful background in [2]: basically, this is a small
part of fixing a long-standing disconnect between pinning pages, and
file systems' use of those pages.
[1] Documentation/core-api/pin_user_pages.rst
[2] "Explicit pinning of user-space pages":
https://lwn.net/Articles/807108/
Cc: Derek Kiernan <derek.kiernan@xilinx.com>
Cc: Dragan Cvetic <dragan.cvetic@xilinx.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Link: https://lore.kernel.org/r/20200527012628.1100649-4-jhubbard@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Return 0 for success, rather than the value of an incrementing
"reg" index. The reg value was never actually used, so this
simplifies the caller slightly.
Cc: Derek Kiernan <derek.kiernan@xilinx.com>
Cc: Dragan Cvetic <dragan.cvetic@xilinx.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Link: https://lore.kernel.org/r/20200527012628.1100649-3-jhubbard@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes the case of get_user_pages_fast() returning a -errno.
The result needs to be stored in a signed integer. And for safe
signed/unsigned comparisons, it's best to keep everything signed.
And get_user_pages_fast() also expects a signed value for number
of pages to pin.
Therefore, change most relevant variables, from u32 to int. Leave
"n" unsigned, for convenience in checking for overflow. And provide
a WARN_ON_ONCE() and early return, if overflow occurs.
Also, as long as we're tidying up: rename the page array from page,
to pages, in order to match the conventions used in most other call
sites.
Fixes: 20ec628e80 ("misc: xilinx_sdfec: Add ability to configure LDPC")
Cc: Derek Kiernan <derek.kiernan@xilinx.com>
Cc: Dragan Cvetic <dragan.cvetic@xilinx.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Link: https://lore.kernel.org/r/20200527012628.1100649-2-jhubbard@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MMU cache invalidation timeout indicates that the device is unstable and
therefore unusable.
Hence in such case do hard reset and return an error to the user if was
called from ioctl.
In addition, change the print to error level and rephrase its text.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
When the MMU is heavily used by the engines, unmapping might take a lot of
time due to a full MMU cache invalidation done as part of the unmap flow.
Hence we might not be able to kill all open processes before going to hard
reset the device, as it involves unmapping of all user memory.
In case of a failure in killing all open processes, we should stop the
hard reset flow as it might lead to a kernel crash - one thread (killing
of a process) is updating MMU structures that other thread (hard reset) is
freeing.
Stopping a hard reset flow leaves the device as nonoperational and the
user can then initiate a hard reset via sysfs to reinitialize the device.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
GAUDI does not support soft-reset as it leaves the NIC ports in an awkward
state, where their QMANs were reset but the NIC itself is still working.
In addition, there is not much sense in doing soft-reset when training is
done on multiple GAUDIs.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
A new sequence is introduced to invalidate the MMU cache in order to avoid
timeouts.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
It's the default.
Also so much for "we're not going to tell the graphics people how to
review their code", dma_fence is a pretty core piece of gpu driver
infrastructure. And it's very much uapi relevant, including piles of
corresponding userspace protocols and libraries for how to pass these
around.
Would be great if habanalabs would not use this (from a quick look
it's not needed at all), since open source the userspace and playing
by the usual rules isn't on the table. If that's not possible (because
it's actually using the uapi part of dma_fence to interact with gpu
drivers) then we have exactly what everyone promised we'd want to
avoid.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
DMA transfers to and from the SD card stall for 10 seconds and run into
timeout on RTS5260 card readers after ASPM was enabled.
Adding a short msleep after disabling ASPM fixes the issue on several
Dell Precision 7530/7540 systems I tested.
This function is only called when waking up after the chip went into
power-save after not transferring data for a few seconds. The added
msleep does therefore not change anything in data transfer speed or
induce any excessive waiting while data transfers are running, or the
chip is sleeping. Only the transition from sleep to active is affected.
Signed-off-by: Klaus Doth <kdlnx@doth.eu>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/4434eaa7-2ee3-a560-faee-6cee63ebd6d4@doth.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rts5249_set_aspm() and rts5260_set_aspm() do nothing more than the default
rtsx_comm_set_aspm() does, so remove them and use the default. No
functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20200521180545.1159896-7-helgaas@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simplify rtsx_comm_set_aspm() and remove the now-unused
rtsx_pci_enable_aspm().
rtsx_pci_disable_aspm() is still used by rtsx_pci_init_hw().
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20200521180545.1159896-6-helgaas@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of using the driver-specific rtsx_pci_update_cfg_byte() to update
the PCIe Link Control Register, use pcie_capability_clear_and_set_word()
like the rest of the kernel does. This makes it easier to maintain ASPM
across the PCI core and drivers.
Remove the now-unused rtsx_pci_update_cfg_byte() and ASPM_MASK_NEG
definitions.
No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20200521180545.1159896-5-helgaas@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use ASPM_MASK_NEG instead of hard-coded value, as other callers of
rtsx_pci_update_cfg_byte() do. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20200521180545.1159896-4-helgaas@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The struct rtsx_cr_option.dev_aspm_mode member is never set to anything
other than DEV_ASPM_DYNAMIC (0). Remove it and code that tests it. No
functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20200521180545.1159896-3-helgaas@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In ocxl_context_free() we note that the AFU reference we're releasing
was taken in "ocxl_context_init", a function that no longer exists.
Fix it to say ocxl_context_alloc() instead, which is the new name for
ocxl_context_init(), since it was renamed.
Fixes: b9721d275c ("ocxl: Allow external drivers to use OpenCAPI contexts")
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200226043923.5481-1-ajd@linux.ibm.com
Add Renesas R8A774C0 in pci_device_id table so that pci-epf-test can be
used for testing PCIe EP on RZ/G2E.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1589493809-2602-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This code was using get_user_pages*(), in a "Case 2" scenario
(DMA/RDMA), using the categorization from [1]. That means that it's
time to convert the get_user_pages*() + put_page() calls to
pin_user_pages*() + unpin_user_pages() calls.
There is some helpful background in [2]: basically, this is a small
part of fixing a long-standing disconnect between pinning pages, and
file systems' use of those pages.
[1] Documentation/core-api/pin_user_pages.rst
[2] "Explicit pinning of user-space pages":
https://lwn.net/Articles/807108/
Cc: Frank Haverkamp <haver@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Link: https://lore.kernel.org/r/20200518015237.1568940-1-jhubbard@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This code was using get_user_pages*(), in a "Case 2" scenario
(DMA/RDMA), using the categorization from [1]. That means that it's
time to convert the get_user_pages*() + put_page() calls to
pin_user_pages*() + unpin_user_pages() calls.
There is some helpful background in [2]: basically, this is a small
part of fixing a long-standing disconnect between pinning pages, and
file systems' use of those pages.
Note that this effectively changes the code's behavior as well: it now
ultimately calls set_page_dirty_lock(), instead of SetPageDirty(). This
is probably more accurate.
As Christoph Hellwig put it, "set_page_dirty() is only safe if we are
dealing with a file backed page where we have reference on the inode it
hangs off." [3]
[1] Documentation/core-api/pin_user_pages.rst
[2] "Explicit pinning of user-space pages":
https://lwn.net/Articles/807108/
[3] https://lore.kernel.org/r/20190723153640.GB720@lst.de
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Link: https://lore.kernel.org/r/20200518041307.1987328-1-jhubbard@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The patch_cb_size is not updated for Wreg32 in its validate function, so
updated in goya_validate_cb.
Signed-off-by: Rachel Stahl <rstahl@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Instead of writing similar event handling code for each ASIC, move the code
to the common firmware file. This code will be used for GAUDI and all
future ASICs.
In addition, add two new fields to the auto-generated events file: valid
and description. This will save the need to manually write the events
description in the source code and simplify the code.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Enable the GAUDI ASIC code in the pci probe callback of the driver so the
driver will handle GAUDI ASICs.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Add the GAUDI code to initialize the ASIC's profiler. The profile receives
its initialization values from the user, same as in Goya, but the code to
initialize is in the driver because the configuration space of the
device is not directly exposed to the user.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Add the code to initialize the security module of GAUDI. Similar to Goya,
we have two dedicated mechanisms for security: Range Registers and
Protection bits. Those mechanisms protect sensitive memory and
configuration areas inside the device.
In addition, in Gaudi we moved to a 3-level security scheme, where the F/W
runs with the highest security level (Privileged), the driver runs with a
less secured level (Secured) and the user is neither privileged nor
secured. The security module in the driver configures the Secured parts so
the user won't be able to access them. The Privileged parts are configured
by the F/W.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The hwmgr module is responsible for messages sent to GAUDI F/W that are
not common to all habanalabs ASICs.
In GAUDI, we provide the user a simplified mode of controlling the ASIC
clock frequency. Instead of three different clocks, we present a single
clock property that the user can configure via sysfs.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Add the ASIC-dependent code for GAUDI. Supply (almost) all of the function
callbacks that the driver's common code need to initialize, finalize and
submit workloads to the GAUDI ASIC.
It also contains the code to initialize the F/W of the GAUDI ASIC and to
receive events from the F/W.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Add the relevant GAUDI ASIC registers header files. These files are
generated automatically from a tool maintained by the VLSI engineers.
There are more files which are not upstreamed because only very few defines
from those files are used in the driver. For those files, we copied the
relevant defines into gaudi_regs.h and gaudi_masks.h, to reduce the size of
this patch.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
For Gaudi the driver gets two new additional properties from the F/W:
1. The card's type - PCI or PMC
2. The card's location in the Gaudi's box (relevant only for PMC).
The card's location is also passed to the user in the HW IP info structure
as it needs this property for establishing communication between Gaudis.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
In Gaudi there is a feature of clock gating certain engines.
Therefore, add this property to the device structure.
In addition, due to a limitation of this feature, the driver needs to
dynamically enable or disable this feature during run-time. Therefore, add
ASIC interface functions to enable/disable this function from the common
code.
Moreover, this feature must be turned off when the user wishes to debug the
ASIC by reading/writing registers and/or memory through the driver's
debugfs. Therefore, add an option to enable/disable clock gating via the
debugfs interface.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
For Gaudi, the driver doesn't change the PM profile automatically due to
device-controlled PM capabilities. Therefore, set the PM profile to auto
only for Goya so the driver's code to automatically change the profile
won't run on Gaudi.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Gaudi requires longer waiting during reset due to closing of network ports.
Add this explanation to the relevant comment in the code and add a
dedicated define for this reset timeout period, instead of multiplying
another define.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Coresight is not supported on simulator, therefore add a boolean for
checking that (currently used by un-upstreamed code).
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Add the following two operations to the CS IOCTL:
Signal:
The signal operation is basically a command submission, that is created by
the driver upon user request. It will be implemented using a dedicated PQE
that will increment a specific SOB. There will be a new flag:
HL_CS_FLAGS_SIGNAL. When the user set this flag in the CS IOCTL structure,
the driver will execute a dedicated code path that will prepare this
special PQE and submit it. The user only needs to provide a queue index on
which to put the signal.
Wait:
The wait operation is also a command submission that is created by the
driver upon user request. It will be implemented using a dedicated PQE that
will contain packets of "ARM a monitor" + FENCE packet. There will be a new
flag: HL_CS_FLAGS_WAIT. When the user set this flag in the CS structure,
the driver will execute a dedicated code path that will prepare this
special PQE and submit it.
The user needs to provide the following parameters:
1. queue ID
2. an array of signal_seq numbers and the number of signals to wait on
(the length of signal_seq_arr).
The IOCTL will return the CS sequence number of the wait it put on the
queue ID.
Currently, the code supports signal_seq_nr==1. But this API definition will
allow us to put a single PQE that waits on multiple signals.
To correctly configure the monitor and fence, the driver will need to
retrieve the specified signal CS object that contains the relevant SOB and
its expected value. In case the signal CS has already been completed, there
is no point of adding a wait operation. In this case, the driver will
return to the user *without* putting anything on the PQ. The return code
should reflect to the user that the signal was completed, as we won't
return a CS sequence number for this wait.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Define a structure representing the h/w sync object (SOB).
a SOB can contain up to 2^15 values. Each signal CS will increment the SOB
by 1, so after some time we will reach the maximum number the SOB can
represent. When that happens, the driver needs to move to a different SOB
for the signal operation.
A SOB can be in 1 of 4 states:
1. Working state with value < 2^15
2. We reached a value of 2^15, but the signal operations weren't completed
yet OR there are pending waits on this signal. For the next submission, the
driver will move to another SOB.
3. ALL the signal operations on the SOB have finished AND there are no more
pending waits on the SOB AND we reached a value of 2^15 (This basically
means the refcnt of the SOB is 0 - see explanation below). When that
happens, the driver can clear the SOB by simply doing WREG32 0 to it and
set the refcnt back to 1.
4. The SOB is cleared and can be used next time by the driver when it needs
to reuse an SOB.
Per SOB, the driver will maintain a single refcnt, that will be initialized
to 1. When a signal or wait operation on this SOB is submitted to the PQ,
the refcnt will be incremented. When a signal or wait operation on this SOB
completes, the refcnt will be decremented. After the submission of the
signal operation that increments the SOB to a value of 2^15, the refcnt is
also decremented.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This feature requires handling h/w resources which are a bit different from
one ASIC to the other. Therefore, we need to define a set of interfaces the
ASIC code provides to the common code to signal, wait, reset sync object
and to reset and init a queue.
As this feature is not supported in Goya, provide an empty implementation
of those functions.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This is a pre-requisite to upstreaming GAUDI support.
Signal/wait operations are done by the user to perform sync between two
Primary Queues (PQs). The sync is done using the sync manager and it is
usually resolved inside the device, but sometimes it can be resolved in the
host, i.e. the user should be able to wait in the host until a signal has
been completed.
The mechanism to define signal and wait operations is done by the driver
because it needs atomicity and serialization, which is already done in the
driver when submitting work to the different queues.
To implement this feature, the driver "takes" a couple of h/w resources,
and this is reflected by the defines added to the uapi file.
The signal/wait operations are done via the existing CS IOCTL, and they use
the same data structure. There is a difference in the meaning of some of
the parameters, and for that we added unions to make the code more
readable.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
PCI drivers should use this define to declare their PCI ID table.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Make all the CB handles printed in the same way and not some as decimal and
some as hex numbers.
Signed-off-by: Dotan Barak <dbarak@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Update the mapping to the latest one used by the Firmware. No impact on the
driver in this update.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Set the STMTCSR.COMPEN bit to enable leading-zero trace data
compression functionality for the extended stimulus ports.
Signed-off-by: Adam Aharon <aaharon@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Load CPU device boot loader during driver boot time in order to avoid flash
write for every boot loader update.
To preserve backward-compatibility, skip the device boot load if the device
doesn't request it.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The user must leave space for 2xMSG_PROT in the external CB, so adjust the
define of max size accordingly. The driver, however, can still create a CB
with the maximum size of 2MB. Therefore, we need to add a check
specifically for the user requested size.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Align the protection bits configuration of all TPC cores to be as of TPC
core 0.
Fixes: a513f9a7ec ("habanalabs: make tpc registers secured")
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Allow user access to TPC LFSR register, as it might be accessed by TPC
kernels.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Add a new opcode to the INFO IOCTL that retrieves the device time
alongside the host time, to allow a user application that want to measure
device time together with host time (such as a profiler) to synchronize
these times.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
set function to be static as it is not called from outside its file.
Signed-off-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
When we have DMA QMAN with multiple streams, we need to know whether the
command buffer contains at least one DMA packet in order to configure the
barriers correctly when adding the 2xMSG_PROT at the end of the JOB. If
there is no DMA packet, then there is no need to put engine barrier. This
is relevant only for GAUDI as GOYA doesn't have streams so the engine can't
be busy by another stream.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Retrieve from the firmware the DMA mask value we need to set according to
the device's PCI controller configuration. This is needed when working on
POWER9 machines, as the device's PCI controller is configured in a
different way in those machines.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Add comments for the various errors and states of the firmware during boot.
Add a mapping of a new register that will tell the driver whether the
firmware executed the request from the driver or if it has encountered an
error.
Add a new enum for the possible values of this register.
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
When doing training, the DL framework (e.g. tensorflow) performs hundreds
of thousands of memory allocations and mappings. In case the driver needs
to perform hard-reset during training, the driver kills the application and
unmaps all those memory allocations. Unfortunately, because of that large
amount of mappings, the driver isn't able to do that in the current timeout
(5 seconds). Therefore, increase the timeout significantly to 30 seconds
to avoid situation where the driver resets the device with active mappings,
which sometime can cause a kernel bug.
BTW, it doesn't mean we will spend all the 30 seconds because the reset
thread checks every one second if the unmap operation is done.
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
When the system administrator asks the driver to soft or hard reset the
device through sysfs, the driver should display a warning in the kernel log
to explain why it suddenly resets the device.
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Move the code of device CPU initialization from being ASIC-Dependent to
common code. In addition, add support for the new error reporting feature
of the firmware boot code.
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
We want to remove the following restrictions/assumptions in our driver:
1. The H/W queue index is also the completion queue index.
2. The H/W queue index is also the IRQ number of the completion queue.
3. All queues of the same type have consecutive indexes.
Therefore we add the support for H/W queues of the same type with
nonconsecutive indexes and completion queue index and IRQ number different
than the H/W queue index.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Stop-on-error mode in DMA is useful as it stops the transaction
immediately upon error e.g. page fault.
But it may cause the next command submission to fail as is leaves the DMA
in unstable state.
Therefore we remove the stop-on-error configuration from the DMA.
Stop-on-err is still available for debug.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Upon reset of the ASIC, the driver would have waited for the CPU to come
out of reset before finishing the reset process. This was done for the
purpose of making the CPU available to answer FLR requests. However, when a
VM shuts down, the driver isn't removed so a reset never happens.
Therefore, remove this waiting period as we don't need it.
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This series enables building various Versatile Express platform drivers
as modules. The primary target is the Fast Model FVP which is supported
in Android. As Android is moving towards their GKI, or generic kernel,
the hardware support has to be in modules. Currently ARCH_VEXPRESS
enables several built-in only drivers. Some of these are needed, but
some are only needed for older 32-bit VExpress platforms and can just
be disabled.
-----BEGIN PGP SIGNATURE-----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=c5eS
-----END PGP SIGNATURE-----
Merge tag 'vexpress-modules-for-soc-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux into arm/soc
VExpress modularization
This series enables building various Versatile Express platform drivers
as modules. The primary target is the Fast Model FVP which is supported
in Android. As Android is moving towards their GKI, or generic kernel,
the hardware support has to be in modules. Currently ARCH_VEXPRESS
enables several built-in only drivers. Some of these are needed, but
some are only needed for older 32-bit VExpress platforms and can just
be disabled.
* tag 'vexpress-modules-for-soc-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
ARM: vexpress: Don't select VEXPRESS_CONFIG
bus: vexpress-config: Support building as module
vexpress: Move setting master site to vexpress-config bus
bus: vexpress-config: simplify config bus probing
bus: vexpress-config: Merge vexpress-syscfg into vexpress-config
mfd: vexpress-sysreg: Support building as a module
mfd: vexpress-sysreg: Use devres API variants
mfd: vexpress-sysreg: Drop unused syscon child devices
mfd: vexpress-sysreg: Drop selecting CONFIG_CLKSRC_MMIO
clk: vexpress-osc: Support building as a module
clk: vexpress-osc: Use the devres clock API variants
clk: versatile: Only enable SP810 on 32-bit by default
clk: versatile: Rework kconfig structure
amba: Retry adding deferred devices at late_initcall
arm64: vexpress: Don't select CONFIG_POWER_RESET_VEXPRESS
ARM: vexpress: Move vexpress_flags_set() into arch code
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Allow me_cl object to be freed by releasing the reference
that was acquired by one of the search functions:
__mei_me_cl_by_uuid_id() or __mei_me_cl_by_uuid()
Cc: <stable@vger.kernel.org>
Reported-by: 亿一 <teroincn@gmail.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200512223140.32186-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fastrpc_invoke_ctx can have refcount of 2 in error path where
rpmsg_send() fails to send invoke message. decrement the refcount
properly in the error path to fix this leak.
This also fixes below static checker warning:
drivers/misc/fastrpc.c:990 fastrpc_internal_invoke()
warn: 'ctx->refcount.refcount.ref.counter' not decremented on lines: 990.
Fixes: c68cfb718c ("misc: fastrpc: Add support for context")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200512110930.2550-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fastrpc_channel_ctx is not freed if misc_register() fails, this would
lead to a memory leak. Fix this leak by adding kfree in misc_register()
error path.
Fixes: 278d56f970 ("misc: fastrpc: Reference count channel context")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200511162722.2552-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver init and exit function don't do anything besides registering
and unregistering the platform driver, so the module_platform_driver()
macro could just be used instead of having separate functions.
Signed-off-by: Harshal Chaudhari <harshalchau04@gmail.com>
Acked-by: Dragan Cvetic <dragan.cvetic@xilinx.com>
Link: https://lore.kernel.org/r/20200510164308.31358-1-harshalchau04@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The only thing that vexpress-syscfg does is provide a regmap to
vexpress-config bus child devices. There's little reason to have 2
components for this. The current structure with initcall ordering
requirements makes turning these components into modules more difficult.
So let's start to simplify things and merge vexpress-syscfg into
vexpress-config. There's no functional change in this commit and it's
still separate components until subsequent commits.
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Disable the MEI driver on LBG SPS (server) platforms, some corner
flows such as recovery mode does not work, and the driver
doesn't have working use cases.
Cc: <stable@vger.kernel.org>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200428211200.12200-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are 4 small misc driver fixes for 5.7-rc3:
- mei driver fix
- interconnect driver fix
- 2 fpga driver fixes
All have been in linux-next with no reported issue
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXqVmbw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynYSACghD2iG6TQyaKnNOUZWwssrTJxWs8AoIxC5q3m
UerIRQ2QQRO6ZqdsnizG
=TUCP
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are 4 small misc driver fixes for 5.7-rc3:
- mei driver fix
- interconnect driver fix
- two fpga driver fixes
All have been in linux-next with no reported issues"
* tag 'char-misc-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
interconnect: qcom: Fix uninitialized tcs_cmd::wait
mei: me: fix irq number stored in hw struct
fpga: dfl: pci: fix return value of cci_pci_sriov_configure
fpga: zynq: Remove clk_get error message for probe defer
Rename DPM_FLAG_NEVER_SKIP to DPM_FLAG_NO_DIRECT_COMPLETE which
matches its purpose more closely.
No functional impact.
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # for PCI parts
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Fix the following sparse warning:
drivers/misc/sgi-xp/xpc_main.c:62:22: warning: symbol 'xpc_dbg_name' was
not declared. Should it be static?
drivers/misc/sgi-xp/xpc_main.c:66:15: warning: symbol
'xpc_part_dbg_subname' was not declared. Should it be static?
drivers/misc/sgi-xp/xpc_main.c:71:15: warning: symbol
'xpc_chan_dbg_subname' was not declared. Should it be static?
drivers/misc/sgi-xp/xpc_main.c:1221:1: warning: symbol 'xpc_init' was
not declared. Should it be static?
drivers/misc/sgi-xp/xpc_main.c:1323:1: warning: symbol 'xpc_exit' was
not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200410063618.27143-2-yanaijie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the following sparse warning:
drivers/misc/sgi-xp/xpnet.c:99:19: warning: symbol 'xpnet_device' was
not declared. Should it be static?
drivers/misc/sgi-xp/xpnet.c:134:22: warning: symbol 'xpnet_dbg_name' was
not declared. Should it be static?
drivers/misc/sgi-xp/xpnet.c:138:15: warning: symbol 'xpnet_dbg_subname'
was not declared. Should it be static?
drivers/misc/sgi-xp/xpnet.c:143:15: warning: symbol 'xpnet' was not
declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20200410063618.27143-1-yanaijie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix coccicheck warning which recommends to use memdup_user().
This patch fixes the following coccicheck warnings:
drivers/misc/xilinx_sdfec.c:652:8-15: WARNING opportunity for memdup_user
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1587524330-119776-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 261b3e1f2a ("mei: me: store irq number in the hw struct.")
stores the irq number in the hw struct before MSI is enabled. This
caused a regression for mei_me_synchronize_irq() waiting for the wrong
irq number. On my laptop this causes a hang on shutdown. Fix the issue
by storing the irq number after enabling MSI.
Fixes: 261b3e1f2a ("mei: me: store irq number in the hw struct.")
Signed-off-by: Benjamin Lee <ben@b1c1l1.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200417184538.349550-1-ben@b1c1l1.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vhost is currently broken on the some ARM configs.
The reason is that the ring element addresses are passed between
components with different alignments assumptions. Thus, if
guest selects a pointer and host then gets and dereferences
it, then alignment assumed by the host's compiler might be
greater than the actual alignment of the pointer.
compiler on the host from assuming pointer is aligned.
This actually triggers on ARM with -mabi=apcs-gnu - which is a
deprecated configuration. With this OABI, compiler assumes that
all structures are 4 byte aligned - which is stronger than
virtio guarantees for available and used rings, which are
merely 2 bytes. Thus a guest without -mabi=apcs-gnu running
on top of host with -mabi=apcs-gnu will be broken.
The correct fix is to force alignment of structures - however
that is an intrusive fix that's best deferred until the next release.
We didn't previously support such ancient systems at all - this surfaced
after vdpa support prompted removing dependency of vhost on
VIRTULIZATION. So for now, let's just add something along the lines of
depends on !ARM || AEABI
to the virtio Kconfig declaration, and add a comment that it has to do
with struct member alignment.
Note: we can't make VHOST and VHOST_RING themselves have
a dependency since these are selected. Add a new symbol for that.
We should be able to drop this dependency down the road.
Fixes: 20c384f1ea ("vhost: refine vhost and vringh kconfig")
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Suggested-by: Richard Earnshaw <Richard.Earnshaw@arm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some bug fixes.
The new vdpa subsystem with two first drivers.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl6MS7wPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpGp8H/2H49Gya1cfVbGU13qgmBSQqQXC8hS3iNLuG
ltRgU+jafJT//kvkdm3/DUzfK3eRUWUfqZLKEbAQDtMY0OGHi/KGEBYVLDde7Zxt
Lg4VnwBhkYDR/f01ZZDbHxzj9JAr83i28nILjLIqf3a1BX4zf203+ZE0/JM8a7wL
dOPoH7NAfyz5ul2F67bR1IOF8vC6TidpavzR2+HC/MocHYXb6Bgfvt+i4EcrfuMf
9lnBfajgklKr9sNJniwvvR1pWVg+YyG3VeC6T8tIC/xzbCmIoNT+5b3q2XPSIHq1
EuQTeXH9CBFXS0qcFlq2ktR1xd1Lx95hKwZpqLwLFDmfgjhV2QU=
=/84P
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- Some bug fixes
- The new vdpa subsystem with two first drivers
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio-balloon: Revert "virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM"
vdpa: move to drivers/vdpa
virtio: Intel IFC VF driver for VDPA
vdpasim: vDPA device simulator
vhost: introduce vDPA-based backend
virtio: introduce a vDPA based transport
vDPA: introduce vDPA bus
vringh: IOTLB support
vhost: factor out IOTLB
vhost: allow per device message handler
vhost: refine vhost and vringh kconfig
virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM
virtio-net: Introduce hash report feature
virtio-net: Introduce RSS receive steering feature
virtio-net: Introduce extended RSC feature
tools/virtio: option to build an out of tree module
-----BEGIN PGP SIGNATURE-----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=deWu
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Revert sysfs "rescan" renames that broke apps (Kelsey Skunberg)
- Add more 32 GT/s link speed decoding and improve the implementation
(Yicong Yang)
Resource management:
- Add support for sizing programmable host bridge apertures and fix a
related alpha Nautilus regression (Ivan Kokshaysky)
Interrupts:
- Add boot interrupt quirk mechanism for Xeon chipsets and document
boot interrupts (Sean V Kelley)
PCIe native device hotplug:
- When possible, disable in-band presence detect and use PDS
(Alexandru Gagniuc)
- Add DMI table for devices that don't use in-band presence detection
but don't advertise that correctly (Stuart Hayes)
- Fix hang when powering slots up/down via sysfs (Lukas Wunner)
- Fix an MSI interrupt race (Stuart Hayes)
Virtualization:
- Add ACS quirks for Zhaoxin devices (Raymond Pang)
Error handling:
- Add Error Disconnect Recover (EDR) support so firmware can report
devices disconnected via DPC and we can try to recover (Kuppuswamy
Sathyanarayanan)
Peer-to-peer DMA:
- Add Intel Sky Lake-E Root Ports B, C, D to the whitelist (Andrew
Maier)
ASPM:
- Reduce severity of common clock config message (Chris Packham)
- Clear the correct bits when enabling L1 substates, so we don't go
to the wrong state (Yicong Yang)
Endpoint framework:
- Replace EPF linkup ops with notifier call chain and improve locking
(Kishon Vijay Abraham I)
- Fix concurrent memory allocation in OB address region (Kishon Vijay
Abraham I)
- Move PF function number assignment to EPC core to support multiple
function creation methods (Kishon Vijay Abraham I)
- Fix issue with clearing configfs "start" entry (Kunihiko Hayashi)
- Fix issue with endpoint MSI-X ignoring BAR Indicator and Table
Offset (Kishon Vijay Abraham I)
- Add support for testing DMA transfers (Kishon Vijay Abraham I)
- Add support for testing > 10 endpoint devices (Kishon Vijay Abraham I)
- Add support for tests to clear IRQ (Kishon Vijay Abraham I)
- Add common DT schema for endpoint controllers (Kishon Vijay Abraham I)
Amlogic Meson PCIe controller driver:
- Add DT bindings for AXG PCIe PHY, shared MIPI/PCIe analog PHY (Remi
Pommarel)
- Add Amlogic AXG PCIe PHY, AXG MIPI/PCIe analog PHY drivers (Remi
Pommarel)
Cadence PCIe controller driver:
- Add Root Complex/Endpoint DT schema for Cadence PCIe (Kishon Vijay
Abraham I)
Intel VMD host bridge driver:
- Add two VMD Device IDs that require bus restriction mode (Sushma
Kalakota)
Mobiveil PCIe controller driver:
- Refactor and modularize mobiveil driver (Hou Zhiqiang)
- Add support for Mobiveil GPEX Gen4 host (Hou Zhiqiang)
Microsoft Hyper-V host bridge driver:
- Add support for Hyper-V PCI protocol version 1.3 and
PCI_BUS_RELATIONS2 (Long Li)
- Refactor to prepare for virtual PCI on non-x86 architectures (Boqun
Feng)
- Fix memory leak in hv_pci_probe()'s error path (Dexuan Cui)
NVIDIA Tegra PCIe controller driver:
- Use pci_parse_request_of_pci_ranges() (Rob Herring)
- Add support for endpoint mode and related DT updates (Vidya Sagar)
- Reduce -EPROBE_DEFER error message log level (Thierry Reding)
Qualcomm PCIe controller driver:
- Restrict class fixup to specific Qualcomm devices (Bjorn Andersson)
Synopsys DesignWare PCIe controller driver:
- Refactor core initialization code for endpoint mode (Vidya Sagar)
- Fix endpoint MSI-X to use correct table address (Kishon Vijay
Abraham I)
TI DRA7xx PCIe controller driver:
- Fix MSI IRQ handling (Vignesh Raghavendra)
TI Keystone PCIe controller driver:
- Allow AM654 endpoint to raise MSI-X interrupt (Kishon Vijay Abraham I)
Miscellaneous:
- Quirk ASMedia XHCI USB to avoid "PME# from D0" defect (Kai-Heng
Feng)
- Use ioremap(), not phys_to_virt(), for platform ROM to fix video
ROM mapping with CONFIG_HIGHMEM (Mikel Rychliski)"
* tag 'pci-v5.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (96 commits)
misc: pci_endpoint_test: remove duplicate macro PCI_ENDPOINT_TEST_STATUS
PCI: tegra: Print -EPROBE_DEFER error message at debug level
misc: pci_endpoint_test: Use full pci-endpoint-test name in request_irq()
misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices
tools: PCI: Add 'e' to clear IRQ
misc: pci_endpoint_test: Add ioctl to clear IRQ
misc: pci_endpoint_test: Avoid using module parameter to determine irqtype
PCI: keystone: Allow AM654 PCIe Endpoint to raise MSI-X interrupt
PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address
PCI: endpoint: Fix ->set_msix() to take BIR and offset as arguments
misc: pci_endpoint_test: Add support to get DMA option from userspace
tools: PCI: Add 'd' command line option to support DMA
misc: pci_endpoint_test: Use streaming DMA APIs for buffer allocation
PCI: endpoint: functions/pci-epf-test: Print throughput information
PCI: endpoint: functions/pci-epf-test: Add DMA support to transfer data
PCI: pciehp: Fix MSI interrupt race
PCI: pciehp: Fix indefinite wait on sysfs requests
PCI: endpoint: Fix clearing start entry in configfs
PCI: tegra: Add support for PCIe endpoint mode in Tegra194
PCI: sysfs: Revert "rescan" file renames
...
Here is the big set of char/misc/other driver patches for 5.7-rc1.
Lots of things in here, and it's later than expected due to some reverts
to resolve some reported issues. All is now clean with no reported
problems in linux-next.
Included in here is:
- interconnect updates
- mei driver updates
- uio updates
- nvmem driver updates
- soundwire updates
- binderfs updates
- coresight updates
- habanalabs updates
- mhi new bus type and core
- extcon driver updates
- some Kconfig cleanups
- other small misc driver cleanups and updates
As mentioned, all have been in linux-next for a while, and with the last
two reverts, all is calm and good.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXodfvA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynzCQCfROhar3E8EhYEqSOP6xq6uhX9uegAnRgGY2rs
rN4JJpOcTddvZcVlD+vo
=ocWk
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc/other driver patches for 5.7-rc1.
Lots of things in here, and it's later than expected due to some
reverts to resolve some reported issues. All is now clean with no
reported problems in linux-next.
Included in here is:
- interconnect updates
- mei driver updates
- uio updates
- nvmem driver updates
- soundwire updates
- binderfs updates
- coresight updates
- habanalabs updates
- mhi new bus type and core
- extcon driver updates
- some Kconfig cleanups
- other small misc driver cleanups and updates
As mentioned, all have been in linux-next for a while, and with the
last two reverts, all is calm and good"
* tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits)
Revert "driver core: platform: Initialize dma_parms for platform devices"
Revert "amba: Initialize dma_parms for amba devices"
amba: Initialize dma_parms for amba devices
driver core: platform: Initialize dma_parms for platform devices
bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device()
bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture
bus: mhi: core: Add support for reading MHI info from device
misc: rtsx: set correct pcr_ops for rts522A
speakup: misc: Use dynamic minor numbers for speakup devices
mei: me: add cedar fork device ids
coresight: do not use the BIT() macro in the UAPI header
Documentation: provide IBM contacts for embargoed hardware
nvmem: core: remove nvmem_sysfs_get_groups()
nvmem: core: use is_bin_visible for permissions
nvmem: core: use device_register and device_unregister
nvmem: core: add root_only member to nvmem device struct
extcon: axp288: Add wakeup support
extcon: Mark extcon_get_edev_name() function as exported symbol
extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER
dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format
...
Pull i2c updates from Wolfram Sang:
"I2C has:
- using defines for bus speeds to avoid mistakes in hardcoded values;
lots of small driver updates because of that. Thanks, Andy!
- API change: i2c_setup_smbus_alert() was renamed to
i2c_new_smbus_alert_device() and returns ERRPTR now. All in-tree
users have been converted
- in the core, a rare race condition when deleting the cdev has been
fixed. Thanks, Kevin!
- lots of driver updates. Thanks, everyone!
I also want to mention: The amount of review and testing tags given
was quite high this time. Thank you to these people, too. I hope we
can keep it like this!"
* 'i2c/for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (34 commits)
i2c: rcar: clean up after refactoring i2c_timings
macintosh: convert to i2c_new_scanned_device
i2c: drivers: Use generic definitions for bus frequencies
i2c: algo: Use generic definitions for bus frequencies
i2c: stm32f7: switch to I²C generic property parsing
i2c: rcar: Consolidate timings calls in rcar_i2c_clock_calculate()
i2c: core: Allow override timing properties with 0
i2c: core: Provide generic definitions for bus frequencies
i2c: mxs: Use dma_request_chan() instead dma_request_slave_channel()
i2c: imx: remove duplicate print after platform_get_irq()
i2c: designware: Fix spelling typos in the comments
i2c: designware: Discard i2c_dw_read_comp_param() function
i2c: designware: Detect the FIFO size in the common code
i2c: dev: Fix the race between the release of i2c_dev and cdev
i2c: qcom-geni: Drop of_platform.h include
i2c: qcom-geni: Grow a dev pointer to simplify code
i2c: qcom-geni: Let firmware specify irq trigger flags
i2c: stm32f7: do not backup read-only PECR register
i2c: smbus: remove outdated references to irq level triggers
i2c: convert SMBus alert setup function to return an ERRPTR
...
PCI_ENDPOINT_TEST_STATUS is already defined in pci_endpoint_test.c along
with the status bits, drop the duplicate definition.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Use full pci-endpoint-test name in request_irq(), so that it's easy to
profile the device that actually raised the interrupt.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Adding more than 10 pci-endpoint-test devices results in
"kobject_add_internal failed for pci-endpoint-test.1 with -EEXIST, don't
try to register things with the same name in the same directory". This
is because commit 2c156ac71c ("misc: Add host side PCI driver for PCI
test function device") limited the length of the "name" to 20 characters.
Change the length of the name to 24 in order to support upto 10000
pci-endpoint-test devices.
Fixes: 2c156ac71c ("misc: Add host side PCI driver for PCI test function device")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org # v4.14+
Add ioctl to clear IRQ which can be used to free the allocated
IRQ vectors and free the requested IRQ.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
commit e03327122e ("pci_endpoint_test: Add 2 ioctl commands")
uses module parameter 'irqtype' in pci_endpoint_test_set_irq()
to check if IRQ vectors of a particular type (MSI or MSI-X or
LEGACY) is already allocated. However with multi-function devices,
'irqtype' will not correctly reflect the IRQ type of the PCI device.
Fix it here by adding 'irqtype' for each PCI device to show the
IRQ type of a particular PCI device.
Fixes: e03327122e ("pci_endpoint_test: Add 2 ioctl commands")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org # v4.19+
'pcitest' utility now uses '-d' option to allow the user to test DMA.
Add support to parse option to use DMA from userspace application.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Alan Mikhak <alan.mikhak@sifive.com>
Use streaming DMA APIs (dma_map_single/dma_unmap_single) for buffers
transmitted/received by the endpoint device instead of allocating
a coherent memory. Also add default_data to set the alignment to
4KB since dma_map_single might not return a 4KB aligned address.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Alan Mikhak <alan.mikhak@sifive.com>
Pull crypto updates from Herbert Xu:
"API:
- Fix out-of-sync IVs in self-test for IPsec AEAD algorithms
Algorithms:
- Use formally verified implementation of x86/curve25519
Drivers:
- Enhance hwrng support in caam
- Use crypto_engine for skcipher/aead/rsa/hash in caam
- Add Xilinx AES driver
- Add uacce driver
- Register zip engine to uacce in hisilicon
- Add support for OCTEON TX CPT engine in marvell"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits)
crypto: af_alg - bool type cosmetics
crypto: arm[64]/poly1305 - add artifact to .gitignore files
crypto: caam - limit single JD RNG output to maximum of 16 bytes
crypto: caam - enable prediction resistance in HRWNG
bus: fsl-mc: add api to retrieve mc version
crypto: caam - invalidate entropy register during RNG initialization
crypto: caam - check if RNG job failed
crypto: caam - simplify RNG implementation
crypto: caam - drop global context pointer and init_done
crypto: caam - use struct hwrng's .init for initialization
crypto: caam - allocate RNG instantiation descriptor with GFP_DMA
crypto: ccree - remove duplicated include from cc_aead.c
crypto: chelsio - remove set but not used variable 'adap'
crypto: marvell - enable OcteonTX cpt options for build
crypto: marvell - add the Virtual Function driver for CPT
crypto: marvell - add support for OCTEON TX CPT engine
crypto: marvell - create common Kconfig and Makefile for Marvell
crypto: arm/neon - memzero_explicit aes-cbc key
crypto: bcm - Use scnprintf() for avoiding potential buffer overflow
crypto: atmel-i2c - Fix wakeup fail
...
Currently, CONFIG_VHOST depends on CONFIG_VIRTUALIZATION. But vhost is
not necessarily for VM since it's a generic userspace and kernel
communication protocol. Such dependency may prevent archs without
virtualization support from using vhost.
To solve this, a dedicated vhost menu is created under drivers so
CONIFG_VHOST can be decoupled out of CONFIG_VIRTUALIZATION.
While at it, also squash Kconfig.vringh into vhost Kconfig file. This
avoids the trick of conditional inclusion from VOP or CAIF. Then it
will be easier to introduce new vringh users and common dependency for
both vringh and vhost.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20200326140125.19794-2-jasowang@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- In-kernel Pointer Authentication support (previously only offered to
user space).
- ARM Activity Monitors (AMU) extension support allowing better CPU
utilisation numbers for the scheduler (frequency invariance).
- Memory hot-remove support for arm64.
- Lots of asm annotations (SYM_*) in preparation for the in-kernel
Branch Target Identification (BTI) support.
- arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the PMU
init callbacks, support for new DT compatibles.
- IPv6 header checksum optimisation.
- Fixes: SDEI (software delegated exception interface) double-lock on
hibernate with shared events.
- Minor clean-ups and refactoring: cpu_ops accessor, cpu_do_switch_mm()
converted to C, cpufeature finalisation helper.
- sys_mremap() comment explaining the asymmetric address untagging
behaviour.
-----BEGIN PGP SIGNATURE-----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=LJVX
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The bulk is in-kernel pointer authentication, activity monitors and
lots of asm symbol annotations. I also queued the sys_mremap() patch
commenting the asymmetry in the address untagging.
Summary:
- In-kernel Pointer Authentication support (previously only offered
to user space).
- ARM Activity Monitors (AMU) extension support allowing better CPU
utilisation numbers for the scheduler (frequency invariance).
- Memory hot-remove support for arm64.
- Lots of asm annotations (SYM_*) in preparation for the in-kernel
Branch Target Identification (BTI) support.
- arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the
PMU init callbacks, support for new DT compatibles.
- IPv6 header checksum optimisation.
- Fixes: SDEI (software delegated exception interface) double-lock on
hibernate with shared events.
- Minor clean-ups and refactoring: cpu_ops accessor,
cpu_do_switch_mm() converted to C, cpufeature finalisation helper.
- sys_mremap() comment explaining the asymmetric address untagging
behaviour"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits)
mm/mremap: Add comment explaining the untagging behaviour of mremap()
arm64: head: Convert install_el2_stub to SYM_INNER_LABEL
arm64: Introduce get_cpu_ops() helper function
arm64: Rename cpu_read_ops() to init_cpu_ops()
arm64: Declare ACPI parking protocol CPU operation if needed
arm64: move kimage_vaddr to .rodata
arm64: use mov_q instead of literal ldr
arm64: Kconfig: verify binutils support for ARM64_PTR_AUTH
lkdtm: arm64: test kernel pointer authentication
arm64: compile the kernel with ptrauth return address signing
kconfig: Add support for 'as-option'
arm64: suspend: restore the kernel ptrauth keys
arm64: __show_regs: strip PAC from lr in printk
arm64: unwind: strip PAC from kernel addresses
arm64: mask PAC bits of __builtin_return_address
arm64: initialize ptrauth keys for kernel booting task
arm64: initialize and switch ptrauth kernel keys
arm64: enable ptrauth earlier
arm64: cpufeature: handle conflicts based on capability
arm64: cpufeature: Move cpu capability helpers inside C file
...
rts522a should use rts522a_pcr_ops, which is
diffrent with rts5227 in phy/hw init setting.
Fixes: ce6a5acc93 ("mfd: rtsx: Add support for rts522A")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200326032618.20472-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add Cedar Fork (CDF) device ids, those belongs to the cannon point family.
Cc: <stable@vger.kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20200324210730.17672-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- add a new ACPI ID for 24c1024
-----BEGIN PGP SIGNATURE-----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=M4pS
-----END PGP SIGNATURE-----
Merge tag 'at24-updates-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-5.7
at24 updates for v5.7
- add a new ACPI ID for 24c1024
When moving from manual to automatic power management mode in GOYA, the
driver didn't correctly place the device in LOW power mode. As a result, if
an application was run immediately after the move, it would have run with
low frequencies.
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
If a GAUDI device is present in the system, display an error message that
it is not supported by the current kernel.
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Add print upon clock slow down due to power consumption or overheating.
In addition, add print when back to optimal clock.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Sparse reports a warning at goya_hw_queues_unlock()
warning: context imbalance in goya_hw_queues_unlock() - unexpected unlock
The root cause is a missing annotation at goya_hw_queues_unlock()
Add the missing __releases(&goya->hw_queues_lock) annotation
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Sparse reports a warning at goya_hw_queues_lock()
warning: context imbalance in goya_hw_queues_lock() - wrong count at exit
The root cause is a missing annotation at goya_hw_queues_lock()
Add the missing __acquires(&goya->hw_queues_lock) annotation
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The "parse_cnt" variable is incremented while validating the CS chunks,
but it is actually not being used.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Add support for hwmon_in_highest, hwmon_temp_highest and hwmon_curr_highest
attributes. These attributes retrieve the historical maximum voltage,
temperature and current that were sampled, respectively.
Signed-off-by: Christine Gharzuzi <cgharzuzi@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The hl read and write routines implement the hwmon_ops read and write
interface routines respectively.
These routines are expected to return a completion status when called,
which was not the case until this commit.
This commit modifies these routines to return 0 upon success and a
negative error value upon failure.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
This commit adds support for offsetting the temperatures reading
by a specified value as defined in
https://www.kernel.org/doc/Documentation/hwmon/sysfs-interface
using the standard sysfs defined for hwmon.
This is required by system administrators to inject errors to test
their monitoring applications in data centers.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The compute engines can perform millions of transactions per second. If
there is a bug in the S/W stack, we could get a lot of interrupts and spam
the kernel log. Therefore, ratelimit these prints
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Allow debug user to write/read 64-bit data through debugfs.
This will expedite the dump process of the (large) internal
memories of the device done during debug.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
DRAM_PHYS_BASE is already taken into account in MMU_PAGE_TABLES_ADDR.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Tomas Winkler
Greg Kroah-Hartman
Vaibhav Gupta
Christophe JAILLET
Alexander A. Klimov
Gustavo A. R. Silva
Bjorn Helgaas
Christoph Hellwig
Oded Gabbay
Philippe Bergheaud
Saheed O. Bolarinwa
Ricky Wu
Michael S. Tsirkin
Lee Jones
Zhangfei Gao
Luc Van Oostenryck
Herbert Xu
Alexander Usyskin
Michał Mirosław
Kees Cook
Rikard Falkeborn
Liao Pingfang
Wang Hai
Omer Shpigelman
Ofir Bitton
Mauro Carvalho Chehab
Masahiro Yamada
Linus Torvalds
Michel Lespinasse
Mike Rapoport
Andrew Donnellan
Joerg Roedel
Rafael J. Wysocki
Tomer Tayar
Al Viro
Jean-Philippe Brucker
John Hubbard
Daniel Vetter
Klaus Doth
Lad Prabhakar
Rachel Stahl
Dotan Barak
Adam Aharon
Christine Gharzuzi
kbuild test robot
Arnd Bergmann
Souptick Joarder
Srinivas Kandagatla
Harshal Chaudhari
Rob Herring
Rui Feng
Jason Yan
Zou Wei
Hu Haowen
Gustavo A. R. Silva
Benjamin Lee
Lad Prabhakar
Kishon Vijay Abraham I
Jason Wang
YueHaibing
Wolfram Sang
Jules Irenge
Moti Haimovski