* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (81 commits)
[S390] remove duplicated #includes
[S390] cpumask: use mm_cpumask() wrapper
[S390] cpumask: Use accessors code.
[S390] cpumask: prepare for iterators to only go to nr_cpu_ids/nr_cpumask_bits.
[S390] cpumask: remove cpu_coregroup_map
[S390] fix clock comparator save area usage
[S390] Add hwcap flag for the etf3 enhancement facility
[S390] Ensure that ipl panic notifier is called late.
[S390] fix dfp elf hwcap/facility bit detection
[S390] smp: perform initial cpu reset before starting a cpu
[S390] smp: fix memory leak on __cpu_up
[S390] ipl: Improve checking logic and remove switch defaults.
[S390] s390dbf: Remove needless check for NULL pointer.
[S390] s390dbf: Remove redundant initilizations.
[S390] use kzfree()
[S390] BUG to BUG_ON changes
[S390] zfcpdump: Prevent zcore from beeing built as a kernel module.
[S390] Use csum_partial in checksum.h
[S390] cleanup lowcore.h
[S390] eliminate ipl_device from lowcore
...
* 'for-2.6.30' of git://git.kernel.dk/linux-2.6-block:
Get rid of pdflush_operation() in emergency sync and remount
btrfs: get rid of current_is_pdflush() in btrfs_btree_balance_dirty
Move the default_backing_dev_info out of readahead.c and into backing-dev.c
block: Repeated lines in switching-sched.txt
bsg: Remove bogus check against request_queue->max_sectors
block: WARN in __blk_put_request() for potential bio leak
loop: fix circular locking in loop_clr_fd()
loop: support barrier writes
bsg: add support for tail queuing
cpqarray: enable bus mastering
block: genhd.h cleanup patch
block: add private bio_set for bio integrity allocations
block: genhd.h comment needs updating
block: get rid of unused blkdev_free_rq() define
block: remove various blk_queue_*() setting functions in blk_init_queue_node()
cciss: add BUILD_BUG_ON() for catching bad CommandList_struct alignment
block: don't create bio_vec slabs of less than the inline number
block: cleanup bio_alloc_bioset()
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1750 commits)
ixgbe: Allow Priority Flow Control settings to survive a device reset
net: core: remove unneeded include in net/core/utils.c.
e1000e: update version number
e1000e: fix close interrupt race
e1000e: fix loss of multicast packets
e1000e: commonize tx cleanup routine to match e1000 & igb
netfilter: fix nf_logger name in ebt_ulog.
netfilter: fix warning in ebt_ulog init function.
netfilter: fix warning about invalid const usage
e1000: fix close race with interrupt
e1000: cleanup clean_tx_irq routine so that it completely cleans ring
e1000: fix tx hang detect logic and address dma mapping issues
bridge: bad error handling when adding invalid ether address
bonding: select current active slave when enslaving device for mode tlb and alb
gianfar: reallocate skb when headroom is not enough for fcb
Bump release date to 25Mar2009 and version to 0.22
r6040: Fix second PHY address
qeth: fix wait_event_timeout handling
qeth: check for completion of a running recovery
qeth: unregister MAC addresses during recovery.
...
Manually fixed up conflicts in:
drivers/infiniband/hw/cxgb3/cxio_hal.h
drivers/infiniband/hw/nes/nes_nic.c
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
[CIFS] Fix memory overwrite when saving nativeFileSystem field during mount
[CIFS] Rename compose_mount_options to cifs_compose_mount_options.
[CIFS] work around bug in Samba server handling for posix open
[CIFS] Use posix open on file open when server supports it
cifs: fix buffer format byte on NT Rename/hardlink
[CIFS] Add definitions for remoteably fsctl calls
[CIFS] add extra null attr check
[CIFS] fix build error
[CIFS] reopen file via newer posix open protocol operation if available
[CIFS] Add new nostrictsync cifs mount option to avoid slow SMB flush
[CIFS] DFS no longer experimental
[CIFS] Send SMB flush in cifs_fsync
We don't have to start a transaction in writepage() when all the blocks
are a properly allocated. Even in ordered mode either the data has been
written via write() and they are thus already added to transaction's list
or the data was written via mmap and then it's random in which transaction
they get written anyway.
This should help VM to pageout dirty memory without blocking on transaction
commits.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw:
GFS2: Fix freeze issue
Fix a minor bug in the previous patch
GFS2: Clean up of glops.c
GFS2: Fix locking bug in failed shared to exclusive conversion
GFS2: Pagecache usage optimization on GFS2
GFS2: fix sparse warning: Should it be static?
GFS2: fix sparse warnings: constant is so big it is ...
GFS2: Support quota/noquota mount arguments
GFS2: Fix alignment issue and tidy gfs2_bitfit
GFS2: Add a "demote a glock" interface to sysfs
GFS2: Expose UUID via sysfs/uevent
GFS2: Support generation of discard requests
GFS2: Fix deadlock on journal flush
GFS2: Fix error path ref counting for root inode
GFS2: Remove unused field from glock
GFS2: Merge lock_dlm module into GFS2
GFS2: Remove "double" locking in quota
GFS2: change gfs2_quota_scan into a shrinker
GFS2: Bring back lvb-related stuff to lock_nolock to support quotas
GFS2: Fix remount argument parsing
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (71 commits)
SELinux: inode_doinit_with_dentry drop no dentry printk
SELinux: new permission between tty audit and audit socket
SELinux: open perm for sock files
smack: fixes for unlabeled host support
keys: make procfiles per-user-namespace
keys: skip keys from another user namespace
keys: consider user namespace in key_permission
keys: distinguish per-uid keys in different namespaces
integrity: ima iint radix_tree_lookup locking fix
TOMOYO: Do not call tomoyo_realpath_init unless registered.
integrity: ima scatterlist bug fix
smack: fix lots of kernel-doc notation
TOMOYO: Don't create securityfs entries unless registered.
TOMOYO: Fix exception policy read failure.
SELinux: convert the avc cache hash list to an hlist
SELinux: code readability with avc_cache
SELinux: remove unused av.decided field
SELinux: more careful use of avd in avc_has_perm_noaudit
SELinux: remove the unused ae.used
SELinux: check seqno when updating an avc_node
...
Change the default behaviour of the kernel to use relatime for all
filesystems. This can be overridden with the "strictatime" mount
option.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add support for explicitly requesting full atime updates. This makes it
possible for kernels to default to relatime but still allow userspace to
override it.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allow atime to be updated once per day even with relatime. This lets
utilities like tmpreaper (which delete files based on last access time)
continue working, making relatime a plausible default for distributions.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: Valerie Aurora Henson <vaurora@redhat.com>
Acked-by: Alan Cox <alan@redhat.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The dasd device driver will now support ECKD devices with more then
65520 cylinders.
In the traditional ECKD adressing scheme each track is addressed
by a 16-bit cylinder and 16-bit head number. The new addressing
scheme makes use of the fact that the actual number of heads is
never larger then 15, so 12 bits of the head number can be redefined
to be part of the cylinder address.
Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Opencode a cheasy approach with kevent. The idea here is that we'll
add some generic delayed work infrastructure, which probably wont be
based on pdflush (or maybe it will, in which case we can just add it
back).
This is in preparation for getting rid of pdflush completely.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Commit 86c9508eb1c0ce5aa07b5cf1d36b60c54efc3d7a
"sysfs: don't block indefinitely for unmapped files" in linux-next
crashes the PowerMac G5 when X starts up. It's caught out by the way
powerpc's pci_mmap of legacy_mem uses shmem_zero_setup(), substituting
a new vma->vm_file whose private_data no longer points to the bin_buffer
(substitution done because some versions of X crash if that mmap fails).
The fix to this is straightforward: the original vm_file is fput() in
that case, so this mmap won't block sysfs at all, so just don't switch
over to bin_vm_ops if vm_file has changed.
But more fixes made before realizing that was the problem:-
It should not be an error if bin_page_mkwrite() finds no underlying
page_mkwrite().
Check that a file already mmap'ed has the same underlying vm_ops
_before_ pointing vma->vm_ops at bin_vm_ops.
If the file being mmap'ed is a shmem/tmpfs file, don't fail the mmap
on CONFIG_NUMA=y, just because that has a set_policy and get_policy:
provide bin_set_policy, bin_get_policy and bin_migrate.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Eric Biederman <ebiederm@aristanetworks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The only way for a sysfs attribute to remove itself (without
deadlock) is to use the sysfs_schedule_callback() interface.
Vegard Nossum discovered that a poorly written sysfs ->store
callback can repeatedly schedule remove callbacks on the same
device over and over, e.g.
$ while true ; do echo 1 > /sys/devices/.../remove ; done
If the 'remove' attribute uses the sysfs_schedule_callback API
and also does not protect itself from concurrent accesses, its
callback handler will be called multiple times, and will
eventually attempt to perform operations on a freed kobject,
leading to many problems.
Instead of requiring all callers of sysfs_schedule_callback to
implement their own synchronization, provide the protection in
the infrastructure.
Now, sysfs_schedule_callback will only allow one scheduled
callback per kobject. On subsequent calls with the same kobject,
return -EAGAIN.
This is a short term fix. The long term fix is to allow sysfs
attributes to remove themselves directly, without any of this
callback hokey pokey.
[cornelia.huck@de.ibm.com: s390 ccwgroup bits]
Reported-by: vegard.nossum@gmail.com
Signed-off-by: Alex Chiang <achiang@hp.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch implements uevent suppress in kobject and removes it
from struct device, based on the following ideas:
1,Uevent sending should be one attribute of kobject, so suppressing it
in kobject layer is more natural than in device layer. By this way,
we can do it for other objects embedded with kobject.
2,It may save several bytes for each instance of struct device.(On my
omap3(32bit ARM) based box, can save 8bytes per device object)
This patch also introduces dev_set|get_uevent_suppress() helpers to
set and query uevent_suppress attribute in case to help kobject
as private part of struct device in future.
[This version is against the latest driver-core patch set of Greg,please
ignore the last version.]
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Modify sysfs bin files so that we can remove the bin file while they are
still mapped. When the kobject is removed we unmap the bin file and
arrange for future accesses to the mapping to receive SIGBUS.
Implementing this prevents a nasty DOS when pci devices are hot plugged
and unplugged. Where if any of their resources were mmaped the kernel
could not free up their pci resources or release their pci data
structures.
[akpm@linux-foundation.org: remove unused var]
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The sysfs_dirent serves as both an inode and a directory entry
for sysfs. To prevent the sysfs inode numbers from being freed
prematurely hold a reference to sysfs_dirent from the sysfs inode.
[akpm@linux-foundation.org: add comment]
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
sysfs: sysfs_add_one WARNs with full path to duplicate filename
As a debugging aid, it can be useful to know the full path to a
duplicate file being created in sysfs.
We now will display warnings such as:
sysfs: cannot create duplicate filename '/foo'
when attempting to create multiple files named 'foo' in the sysfs
root, or:
sysfs: cannot create duplicate filename '/bus/pci/slots/5/foo'
when attempting to create multiple files named 'foo' under a
given directory in sysfs.
The path displayed is always a relative path to sysfs_root. The
leading '/' in the path name refers to the sysfs_root mount
point, and should not be confused with the "real" '/'.
Thanks to Alex Williamson for essentially writing sysfs_pathname.
Cc: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
sysfs_get_inode ultimately calls sysfs_count_nlink when the a
directory inode is fectched. sysfs_count_nlink needs to be
called under the sysfs_mutex to guard against the unlikely
but possible scenario that the root directory is changing
as we are counting the number entries in it, and just in
general to be consistent.
Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
SYSFS_MAGIC has been added into magic.h, so only use that definition
in magic.h to avoid potential consistency problem.
Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The integrity bio allocation needs its own bio_set to avoid violating
the mempool allocation rules and risking deadlocks.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
If we don't have CONFIG_BLK_DEV_INTEGRITY set, then we don't have
any external dependencies on the bio_vec slabs. So don't create
the ones that we will inline anyway.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
this warning (which got fixed by commit b2bf968):
fs/bio.c: In function ‘bio_alloc_bioset’:
fs/bio.c:305: warning: ‘p’ may be used uninitialized in this function
Triggered because the code flow in bio_alloc_bioset() is correct
but a bit complex for the compiler to see through.
Streamline it a bit - this also makes the code a tiny bit more compact:
text data bss dec hex filename
7540 256 40 7836 1e9c bio.o.before
7539 256 40 7835 1e9b bio.o.after
Also remove an older compiler-warnings annotation from this function,
it's not needed.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This removes some old code that was causing issues during
filesystem freeze.
Reported-by: Andrew Price <andy@andrewprice.me.uk>
Tested-by: Andrew Price <andy@andrewprice.me.uk>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The logic requires that we mark the glock dirty in page_mkwrite
otherwise we might not flush correctly in the case that no
allocation was required in the process of dirying the page.
Also we need to set the shared write flag early for the same
reason.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This cleans up a number of bits of code mostly based in glops.c.
A couple of simple functions have been merged into the callers
to make it more obvious what is going on, the mysterious raising
of i_writecount around the truncate_inode_pages() call has been
removed. The meta_go_* operations have been renamed rgrp_go_*
since that is the only lock type that they are used with.
The unused argument of gfs2_read_sb has been removed. Also
a bug has been fixed where a check for the rindex inode was
in the wrong callback. More comments are added, and the
debugging code is improved too.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
After calling out to the dlm, GFS2 sets the new state of a glock to
gl_target in gdlm_ast(). However, gl_target is not always the lock
state that was requested. If a conversion from shared to exclusive
fails, finish_xmote() will call do_xmote() with LM_ST_UNLOCKED, instead
of gl->gl_target, so that it can reacquire the lock in exlusive the next
time around. In this case, setting the lock to gl_target in gdlm_ast()
will make GFS2 think that it has the glock in exclusive mode, when
really, it doesn't have the glock locked at all. This patch adds a new
field to the gfs2_glock structure, gl_req, to track the mode that was
requested.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
I introduced "is_partially_uptodate" aops for GFS2.
A page can have multiple buffers and even if a page is not uptodate, some buffers
can be uptodate on pagesize != blocksize environment.
This aops checks that all buffers which correspond to a part of a file
that we want to read are uptodate. If so, we do not have to issue actual
read IO to HDD even if a page is not uptodate because the portion we
want to read are uptodate.
"block_is_partially_uptodate" function is already used by ext2/3/4.
With the following patch random read/write mixed workloads or random read after
random write workloads can be optimized and we can get performance improvement.
I did a performance test using the sysbench.
#sysbench --num-threads=16 --max-requests=200000 --test=fileio --file-num=1
--file-block-size=8K --file-total-size=2G --file-test-mode=rndrw --file-fsync-freq=0
--file-rw-ratio=1 run
-2.6.29-rc6
Test execution summary:
total time: 202.6389s
total number of events: 200000
total time taken by event execution: 2580.0480
per-request statistics:
min: 0.0000s
avg: 0.0129s
max: 49.5852s
approx. 95 percentile: 0.0462s
-2.6.29-rc6-patched
Test execution summary:
total time: 177.8639s
total number of events: 200000
total time taken by event execution: 2419.0199
per-request statistics:
min: 0.0000s
avg: 0.0121s
max: 52.4306s
approx. 95 percentile: 0.0444s
arch: ia64
pagesize: 16k
blocksize: 4k
Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Impact: Make symbol static.
Fix this sparse warning:
fs/gfs2/rgrp.c:188:5: warning: symbol 'gfs2_bitfit' was not declared. Should it be static?
Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Fix this sparse warnings:
fs/gfs2/rgrp.c:156:23: warning: constant 0xffffffffffffffff is so big it is unsigned long long
fs/gfs2/rgrp.c:157:23: warning: constant 0xaaaaaaaaaaaaaaaa is so big it is unsigned long long
fs/gfs2/rgrp.c:158:23: warning: constant 0x5555555555555555 is so big it is long long
fs/gfs2/rgrp.c:194:20: warning: constant 0x5555555555555555 is so big it is long long
fs/gfs2/rgrp.c:204:44: warning: constant 0x5555555555555555 is so big it is long long
Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This adds support for "quota" and "noquota" mount options in addition to the
existing "quota=on/off/account" so that we are compatible with the names by
which these options are more generally known.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
An alignment issue with the existing bitfit algorithm was reported
on IA64. This patch attempts to fix that, and also to tidy up the
code a bit. There is now more documentation about how this works
and it has survived a number of different tests.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This adds a sysfs file called demote_rq to GFS2's
per filesystem directory. Its possible to use this
file to demote arbitrary glocks in exactly the same
way as if a request had come in from a remote node.
This is intended for testing issues relating to caching
of data under glocks. Despite that, the interface is
generic enough to send requests to any type of glock,
but be careful as its not always safe to send an
arbitrary message to an arbitrary glock. For that reason
and to prevent DoS, this interface is restricted to root
only.
The messages look like this:
<type>:<glocknumber> <mode>
Example:
echo -n "2:13324 EX" >/sys/fs/gfs2/unity:myfs/demote_rq
Which means "please demote inode glock (type 2) number 13324 so that
I can get an EX (exclusive) lock". The lock modes are those which
would normally be sent by a remote node in its callback so if you
want to unlock a glock, you use EX, to demote to shared, use SH or PR
(depending on whether you like GFS2 or DLM lock modes better!).
If the glock doesn't exist, you'll get -ENOENT returned. If the
arguments don't make sense, you'll get -EINVAL returned.
The plan is that this interface will be used in combination with
the blktrace patch which I recently posted for comments although
it is, of course, still useful in its own right.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Since we have a UUID, we ought to expose it to the user via sysfs
and uevents. We already have the fs name in both of these places
(a combination of the lock proto and lock table name) so if we add
the UUID as well, we have a full set.
For older filesystems (i.e. those created before mkfs.gfs2 was writing
UUIDs by default) the sysfs file will appear zero length, and no UUID
env var will be added to the uevents.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch allows GFS2 to generate discard requests for blocks which are
no longer useful to the filesystem (i.e. those which have been freed as
the result of an unlink operation). The requests are generated at the
time which those blocks become available for reuse in the filesystem.
In order to use this new feature, you have to specify the "discard"
mount option. The code coalesces adjacent blocks into a single extent
when generating the discard requests, thus generating the minimum
number.
If an error occurs when the request has been sent to the block device,
then it will print a message and turn off the requests for that
filesystem. If the problem is temporary, then you can use remount to
turn the option back on again. There is also a nodiscard mount option
so that you can use remount to turn discard requests off, if required.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch fixes a deadlock when the journal is flushed and there
are dirty inodes other than the one which caused the journal flush.
Originally the journal flushing code was trying to obtain the
transaction glock while running the flush code for an inode glock.
We no longer require the transaction glock at this point in time
since we know that any attempt to get the transaction glock from
another node will result in a journal flush. So if we are flushing
the journal, we can be sure that the transaction lock is still
cached from when the transaction was started.
By inlining a version of gfs2_trans_begin() (minus the bit which
gets the transaction glock) we can avoid the deadlock problems
caused if there is a demote request queued up on the transaction
glock.
In addition I've also moved the umount rwsem so that it covers
the glock workqueue, since it all demotions are done by this
workqueue now. That fixes a bug on umount which I came across
while fixing the original problem.
Reported-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
We were keeping hold of an extra ref to the root inode in one
of the error paths, that resulted in a hang.
Reported-by: Nate Straz <nstraz@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Tested-by: Robert Peterson <rpeterso@redhat.com>
The time stamp field is unused in the glock now that we are
using a shrinker, so that we can remove it and save sizeof(unsigned long)
bytes in each glock.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This is the big patch that I've been working on for some time
now. There are many reasons for wanting to make this change
such as:
o Reducing overhead by eliminating duplicated fields between structures
o Simplifcation of the code (reduces the code size by a fair bit)
o The locking interface is now the DLM interface itself as proposed
some time ago.
o Fewer lookups of glocks when processing replies from the DLM
o Fewer memory allocations/deallocations for each glock
o Scope to do further optimisations in the future (but this patch is
more than big enough for now!)
Please note that (a) this patch relates to the lock_dlm module and
not the DLM itself, that is still a separate module; and (b) that
we retain the ability to build GFS2 as a standalone single node
filesystem with out requiring the DLM.
This patch needs a lot of testing, hence my keeping it I restarted
my -git tree after the last merge window. That way, this has the maximum
exposure before its merged. This is (modulo a few minor bug fixes) the
same patch that I've been posting on and off the the last three months
and its passed a number of different tests so far.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
We only really need a single spin lock for the quota data, so
lets just use the lru lock for now.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Abhijith Das <adas@redhat.com>
Deallocation of gfs2_quota_data objects now happens on-demand through a
shrinker instead of routinely deallocating through the quotad daemon.
Signed-off-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The quota code uses lvbs and this is currently not implemented in
lock_nolock, thereby causing panics when quota is enabled with
lock_nolock. This patch adds the relevant bits.
Signed-off-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The following patch fixes an issue relating to remount and argument
parsing. After this fix is applied, remount becomes atomic in that
it either succeeds changing the mount to the new state, or it fails
and leaves it in the old state. Previously it was possible for the
parsing of options to fail part way though and for the fs to be left
in a state where some of the new arguments had been applied, but some
had not.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Update all previous incarnations of my email address to the correct one.
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If ecryptfs_encrypted_view or ecryptfs_xattr_metadata were being
specified as mount options, a NULL pointer dereference of crypt_stat
was possible during lookup.
This patch moves the crypt_stat assignment into
ecryptfs_lookup_and_interpose_lower(), ensuring that crypt_stat
will not be NULL before we attempt to dereference it.
Thanks to Dan Carpenter and his static analysis tool, smatch, for
finding this bug.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Acked-by: Dustin Kirkland <kirkland@canonical.com>
Cc: Dan Carpenter <error27@gmail.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When allocating the memory used to store the eCryptfs header contents, a
single, zeroed page was being allocated with get_zeroed_page().
However, the size of an eCryptfs header is either PAGE_CACHE_SIZE or
ECRYPTFS_MINIMUM_HEADER_EXTENT_SIZE (8192), whichever is larger, and is
stored in the file's private_data->crypt_stat->num_header_bytes_at_front
field.
ecryptfs_write_metadata_to_contents() was using
num_header_bytes_at_front to decide how many bytes should be written to
the lower filesystem for the file header. Unfortunately, at least 8K
was being written from the page, despite the chance of the single,
zeroed page being smaller than 8K. This resulted in random areas of
kernel memory being written between the 0x1000 and 0x1FFF bytes offsets
in the eCryptfs file headers if PAGE_SIZE was 4K.
This patch allocates a variable number of pages, calculated with
num_header_bytes_at_front, and passes the number of allocated pages
along to ecryptfs_write_metadata_to_contents().
Thanks to Florian Streibelt for reporting the data leak and working with
me to find the problem. 2.6.28 is the only kernel release with this
vulnerability. Corresponds to CVE-2009-0787
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Acked-by: Dustin Kirkland <kirkland@canonical.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Eugene Teo <eugeneteo@kernel.sg>
Cc: Greg KH <greg@kroah.com>
Cc: dann frazier <dannf@dannf.org>
Cc: Serge E. Hallyn <serue@us.ibm.com>
Cc: Florian Streibelt <florian@f-streibelt.de>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds
Jan Kara
David S. Miller
Matthew Garrett
Stefan Weinhuber
Jens Axboe
Hugh Dickins
Alex Chiang
Ming Lei
Eric W. Biederman
Eric W. Biederman
Qinghuang Feng
Martin K. Petersen
Ingo Molnar
Steven Whitehouse
Benjamin Marzinski
Hisashi Hifumi
Hannes Eder
Abhijith Das
James Morris
Gertjan van Wingerde
Tyler Hicks