The alias is used by the boot loader to perform a device tree
fixup.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
8xx uses a two level page table with two different linux page size
support (4k and 16k). 8xx also support two different hugepage sizes
512k and 8M. In order to support them on linux we define two different
page table layout.
The size of pages is in the PGD entry, using PS field (bits 28-29):
00 : Small pages (4k or 16k)
01 : 512k pages
10 : reserved
11 : 8M pages
For 512K hugepage size a pgd entry have the below format
[<hugepte address >0101] . The hugepte table allocated will contain 8
entries pointing to 512K huge pte in 4k pages mode and 64 entries in
16k pages mode.
For 8M in 16k mode, a pgd entry have the below format
[<hugepte address >1101] . The hugepte table allocated will contain 8
entries pointing to 8M huge pte.
For 8M in 4k mode, multiple pgd entries point to the same hugepte
address and pgd entry will have the below format
[<hugepte address>1101]. The hugepte table allocated will only have one
entry.
For the time being, we do not support CPU15 ERRATA when HUGETLB is
selected
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> (v3, for the generic bits)
Signed-off-by: Scott Wood <oss@buserror.net>
Today there are two implementations of hugetlbpages which are managed
by exclusive #ifdefs:
* FSL_BOOKE: several directory entries points to the same single hugepage
* BOOK3S: one upper level directory entry points to a table of hugepages
In preparation of implementation of hugepage support on the 8xx, we
need a mix of the two above solutions, because the 8xx needs both cases
depending on the size of pages:
* In 4k page size mode, each PGD entry covers a 4M bytes area. It means
that 2 PGD entries will be necessary to cover an 8M hugepage while a
single PGD entry will cover 8x 512k hugepages.
* In 16 page size mode, each PGD entry covers a 64M bytes area. It means
that 8x 8M hugepages will be covered by one PGD entry and 64x 512k
hugepages will be covers by one PGD entry.
This patch:
* removes #ifdefs in favor of if/else based on the range sizes
* merges the two huge_pte_alloc() functions as they are pretty similar
* merges the two hugetlbpage_init() functions as they are pretty similar
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> (v3)
Signed-off-by: Scott Wood <oss@buserror.net>
Today powerpc64 uses a set of pgtable_caches while powerpc32 uses
standard pages when using 4k pages and a single pgtable_cache
if using other size pages.
In preparation of implementing huge pages on the 8xx, this patch
replaces the specific powerpc32 handling by the 64 bits approach.
This is done by:
* moving 64 bits pgtable_cache_add() and pgtable_cache_init()
in a new file called init-common.c
* modifying pgtable_cache_init() to also handle the case
without PMD
* removing the 32 bits version of pgtable_cache_add() and
pgtable_cache_init()
* copying related header contents from 64 bits into both the
book3s/32 and nohash/32 header files
On the 8xx, the following cache sizes will be used:
* 4k pages mode:
- PGT_CACHE(10) for PGD
- PGT_CACHE(3) for 512k hugepage tables
* 16k pages mode:
- PGT_CACHE(6) for PGD
- PGT_CACHE(7) for 512k hugepage tables
- PGT_CACHE(3) for 8M hugepage tables
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Use resource_size function on resource object
instead of explicit computation.
Generated by: scripts/coccinelle/api/resource_size.cocci
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Use builtin_platform_driver() helper to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Use builtin_platform_driver() helper to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Use builtin_platform_driver() helper to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Scott Wood <oss@buserror.net>
The hardware descriptors have big endian (BE) format.
Provide proper endianness handling for the remaining
descriptor fields, to ensure they are correctly
accessed by non-BE CPUs too.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
There are multiple occurences of both contextB and context_b
in different h/w descriptors, referring to the same descriptor
field known as "Context B". Stick with the "context_b" naming,
for obvious reasons including consistency (see also context_a).
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Preventively mask every access to the 'fqid' h/w field,
since it is defined as a 24-bit field, for every h/w
descriptor. Add generic accessors for this field to
ensure correct access.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
1. qm_mcc_querywq layout not used for now, so drop it;
2. queryfq, queryfq_np and alterfq are used only for accesses to
the 'fqid' field, so replace these with a generic 'fq' layout.
As a consequence, 'querycgr' turns into 'cgr' following the
same reasoning above and for consistent naming.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Replace dummy platform device hack with a reference to a portal's
platform device, in order to dma map the test frame for this
small unit test. The 2 qman symbols need to be exported because
this self test is a kernel module.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
The qman portals are platform devices themselves, so they should
handle dma mappings. Creating a dummy platform device in order to
support dma mapping operations is not justified (and not portable).
Instead, do the mapping against the first portal that has been
initialised.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
This function must only return the truth value of whether
two frame descriptors are different or not.
It does NOT have to compute some obscure difference between
fd fields and return it as an int, making sparse complain
about type conversions in the process.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Use the proper accessor to get the FD address.
Accessing the internal field "addr_lo" directly is not portable
and error prone.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
In case init_pcfg() returns with error the CI region
must be unmapped too.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
qman_query_fq*() may return other error codes apart from
-ERANGE, in which cases the error handling done by the
resource cleanup callers would be wrong. The patch
fixes the handling of those cases, and cleans up related
code inside the resource cleanup & release handlers (i.e.
replace hardcoded fqid value with corresponding define).
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Use arch portable of_property_read_u32() instead, which takes
care of endianness conversions.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>
These config changes build:
drivers/power/reset/gpio-poweroff.c
drivers/power/reset/gpio-restart.c
Signed-off-by: Andy Fleming <afleming@gmail.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Use of_property_read_u32 instead of the generic of_get_property to
simplify the code. In addition move the declaration of fs_baudrate
into get_baudrate because it's private to this function.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Use of_property_read_u32 instead of the generic of_get_property to
simplify the code. In addition move the declaration of brgfreq
into get_brgfreq because it's private to this function.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
[scottwood: minor whitespace fixes]
Signed-off-by: Scott Wood <oss@buserror.net>
Use of_property_read_u32 instead of the generic of_get_property to
simplify the code. In addition move the declaration of sysfreq
into fsl_get_sys_freq because it's private to this function.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Scott Wood <oss@buserror.net>
The QEMU e500 board needs to enable CONFIG_E500 to correctly boot. QEMU
for ppc64 uses e5500/e6500 emulation, thus CONFIG_PPC_E500MC is required
as well.
Signed-off-by: David Engraf <david.engraf@sysgo.com>
Signed-off-by: Scott Wood <oss@buserror.net>
Trivial fix to spelling mistake "uncommited" to "uncommitted" in
critical error messages.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Scott Wood <oss@buserror.net>
The T4240RDB contains a W83793 hardware monitoring chip. Add a device
tree entry to make the driver attach to it, as the i2c-mpc bus driver
dropped support for class-based instantiation of devices a long time
ago.
Signed-off-by: Florian Larysch <fl@n621.de>
Signed-off-by: Scott Wood <oss@buserror.net>
Version 3.00 of the ISA states that the PATS (partition table size) field
of the PTCR (partition table control register) and the PRTS (process table
size) field of the partition table entry must both be less than or equal
to 24. However the actual size of the partition and process tables is equal
to 2 to the power of 12 plus the PATS and PRTS fields, respectively. This
means that the max allowable size of each of these tables is 2^36 or 64GB
for both.
Thus when checking the size shift for each we should be checking for values
of greater than 36 instead of the current check for shifts larger than 24
and 23.
Fixes: 2bfd65e45e
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds ptrace interface test for TM SPR registers. This
also adds ptrace interface based helper functions related to TM
SPR registers access.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds ptrace interface test for VSX, VMX registers
inside TM context. This also adds ptrace interface based helper
functions related to chckpointed VSX, VMX registers access.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds ptrace interface test for VSX, VMX registers.
This also adds ptrace interface based helper functions related
to VSX, VMX registers access. This also adds some assembly
helper functions related to VSX and VMX registers.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds ptrace interface test for TAR, PPR, DSCR
registers inside TM context. This also adds ptrace
interface based helper functions related to checkpointed
TAR, PPR, DSCR register access.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds ptrace interface test for TAR, PPR, DSCR
registers. This also adds ptrace interface based helper
functions related to TAR, PPR, DSCR register access.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds ptrace interface test for GPR/FPR registers
inside suspended TM context.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds ptrace interface test for GPR/FPR registers
inside TM context. This adds ptrace interface based helper
functions related to checkpointed GPR/FPR access.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds ptrace interface test for GPR/FPR registers.
This adds ptrace interface based helper functions related to
GPR/FPR access and some assembly helper functions related to
GPR/FPR registers.
Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
[mpe: Add #defines for the new note types when headers don't define them]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There are some functions, especially register related, which can
be shared across multiple selftests/powerpc test directories.
This patch creates a new include directory to store those shared
files, so that the file layout becomes more neat.
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com>
[mpe: Reworked to move the headers only]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Madalin Bucur
Fabian Frederick
Christophe Leroy
Wei Yongjun
Geliang Tang
Claudiu Manoil
Andy Fleming
Heiner Kallweit
David Engraf
Colin Ian King
Florian Larysch
Suraj Jitindar Singh
Anshuman Khandual
Simon Guo