Граф коммитов

86 Коммитов

Автор SHA1 Сообщение Дата
Russell King 988addf82e Merge branch 'origin' into devel-stable
Conflicts:
	arch/arm/mach-mx2/devices.c
	arch/arm/mach-mx2/devices.h
	sound/soc/pxa/pxa-ssp.c
2010-03-08 20:21:04 +00:00
Magnus Damm 13d605de2e sh: Build drivers/sh for ARM-based SH-Mobile CPUs.
Build drivers/sh in the case of ARM-based SH-Mobile CPUs.
Shared code for the interrupt controller (INTC) and
the gpio/pinmux (PFC) is located there.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-08 12:45:47 +09:00
Michael S. Tsirkin 3a4d5c94e9 vhost_net: a kernel-level virtio server
What it is: vhost net is a character device that can be used to reduce
the number of system calls involved in virtio networking.
Existing virtio net code is used in the guest without modification.

There's similarity with vringfd, with some differences and reduced scope
- uses eventfd for signalling
- structures can be moved around in memory at any time (good for
  migration, bug work-arounds in userspace)
- write logging is supported (good for migration)
- support memory table and not just an offset (needed for kvm)

common virtio related code has been put in a separate file vhost.c and
can be made into a separate module if/when more backends appear.  I used
Rusty's lguest.c as the source for developing this part : this supplied
me with witty comments I wouldn't be able to write myself.

What it is not: vhost net is not a bus, and not a generic new system
call. No assumptions are made on how guest performs hypercalls.
Userspace hypervisors are supported as well as kvm.

How it works: Basically, we connect virtio frontend (configured by
userspace) to a backend. The backend could be a network device, or a tap
device.  Backend is also configured by userspace, including vlan/mac
etc.

Status: This works for me, and I haven't see any crashes.
Compared to userspace, people reported improved latency (as I save up to
4 system calls per packet), as well as better bandwidth and CPU
utilization.

Features that I plan to look at in the future:
- mergeable buffers
- zero copy
- scalability tuning: figure out the best threading model to use

Note on RCU usage (this is also documented in vhost.h, near
private_pointer which is the value protected by this variant of RCU):
what is happening is that the rcu_dereference() is being used in a
workqueue item.  The role of rcu_read_lock() is taken on by the start of
execution of the workqueue item, of rcu_read_unlock() by the end of
execution of the workqueue item, and of synchronize_rcu() by
flush_workqueue()/flush_work(). In the future we might need to apply
some gcc attribute or sparse annotation to the function passed to
INIT_WORK(). Paul's ack below is for this RCU usage.

(Includes fixes by Alan Cox <alan@linux.intel.com>,
David L Stevens <dlstevens@us.ibm.com>,
Chris Wright <chrisw@redhat.com>)

Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-15 01:43:29 -08:00
Linus Torvalds a7c367b95a Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (58 commits)
  mtd: jedec_probe: add PSD4256G6V id
  mtd: OneNand support for Nomadik 8815 SoC (on NHK8815 board)
  mtd: nand: driver for Nomadik 8815 SoC (on NHK8815 board)
  m25p80: Add Spansion S25FL129P serial flashes
  jffs2: Use SLAB_HWCACHE_ALIGN for jffs2_raw_{dirent,inode} slabs
  mtd: sh_flctl: register sh_flctl using platform_driver_probe()
  mtd: nand: txx9ndfmc: transfer 512 byte at a time if possible
  mtd: nand: fix tmio_nand ecc correction
  mtd: nand: add __nand_correct_data helper function
  mtd: cfi_cmdset_0002: add 0xFF intolerance for M29W128G
  mtd: inftl: fix fold chain block number
  mtd: jedec: fix compilation problem with I28F640C3B definition
  mtd: nand: fix ECC Correction bug for SMC ordering for NDFC driver
  mtd: ofpart: Check availability of reg property instead of name property
  driver/Makefile: Initialize "mtd" and "spi" before "net"
  mtd: omap: adding DMA mode support in nand prefetch/post-write
  mtd: omap: add support for nand prefetch-read and post-write
  mtd: add nand support for w90p910 (v2)
  mtd: maps: add mtd-ram support to physmap_of
  mtd: pxa3xx_nand: add single-bit error corrections reporting
  ...
2009-09-23 10:07:49 -07:00
Sudhakar Rajashekhara 9289d4ef06 driver/Makefile: Initialize "mtd" and "spi" before "net"
On TI's da850/omap-l138 EVM, MAC address is stored in SPI flash.

This patch changes the initialization sequence of the drivers
by moving mtd and spi ahead of net in drivers/Makefile thereby
enabling da850/omap-l138 ethernet driver to read the MAC address
while booting.

Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-19 13:21:10 -07:00
Feng Tang 6ae6996a46 SFI: add platform-independent core support
drivers/sfi/sfi_core.c contains the generic SFI implementation.
It has a private header, sfi_core.h, for its own use and the
private use of future files in drivers/sfi/

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-08-28 19:57:33 -04:00
Rodolfo Giometti eae9d2ba0c LinuxPPS: core support
This patch adds the kernel side of the PPS support currently named
"LinuxPPS".

PPS means "pulse per second" and a PPS source is just a device which
provides a high precision signal each second so that an application can
use it to adjust system clock time.

Common use is the combination of the NTPD as userland program with a GPS
receiver as PPS source to obtain a wallclock-time with sub-millisecond
synchronisation to UTC.

To obtain this goal the userland programs shoud use the PPS API
specification (RFC 2783 - Pulse-Per-Second API for UNIX-like Operating
Systems, Version 1.0) which in part is implemented by this patch.  It
provides a set of chars devices, one per PPS source, which can be used to
get the time signal.  The RFC's functions can be implemented by accessing
to these char devices.

Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg KH <greg@kroah.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18 13:04:04 -07:00
Florian Fainelli 55e331cf7e drivers: add support for the TI VLYNQ bus
Add support for the TI VLYNQ high-speed, serial and packetized bus.

This bus allows external devices to be connected to the System-on-Chip and
appear in the main system memory just like any memory mapped peripheral.
It is widely used in TI's networking and multimedia SoC, including the AR7
SoC.

Signed-off-by: Eugene Konev <ejka@imfi.kspu.ru>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16 19:47:52 -07:00
Sergey Lapin 8459464f07 ieee802154: add simple HardMAC driver sample
fakehard is a really simple driver implementing only necessary
callbacks and serves the role of an example of driver for HardMAC
IEEE 802.15.4 device.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Sergey Lapin <slapin@ossfans.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-09 05:25:34 -07:00
Guennadi Liakhovetski a357482a1e V4L/DVB (11561a): move media after i2c
Currently drivers/media drivers are linked very early - directly after
base, block, misc, and mfd and before ata, scsi, ide, input, firewire,
usb, and i2c. This breaks static build of video4linux drivers, that use
generic CPU i2c adapter drivers and the v4l2-subdev subsystem, because
during video4linux probing the v4l2-subdev core requires a struct
i2c_adapter context, which cannot be satisfied before the i2c subsystem is
initialised. Moving drivers/media after drivers/i2c fixes this problem.

The best way to trigger action is by submitting a patch:-) So, let's see
what comes out of it - on the one hand I don't see any reason why media
has to be linked this early, and nobody was able to give me one yesterday
as this problem has been discussed on linux-media, OTOH, maybe indeed it
would be better to move i2c the whole way up above media, but that'd be
much bigger of a change, I think.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-04-29 15:41:13 -03:00
Arjan van de Ven 0c406263f0 ide/net: flip the order of SATA and network init
this patch flips the order in which sata and network drivers are initialized.

SATA probing takes quite a bit of time, and with the asynchronous infrastructure
other drivers that run after it can execute in parallel. Network drivers do tend
to take some real time talking to the hardware, so running these later is
a good thing (the sata probe then runs concurrent)

This saves about 15% of my kernels boot time.

Both Dave and Jeff acked this patch and suggested it should go via the async
tree.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Jeff Garzik <jeff@garzik.org>
2009-03-28 13:06:16 -07:00
Len Brown d97c0defba Merge branch 'drivers-platform' into release
Conflicts:
	drivers/misc/Kconfig

Signed-off-by: Len Brown <len.brown@intel.com>
2009-01-09 04:56:56 -05:00
David Brownell 9f4dab49e5 regulator: init/link earlier
Move regulator earlier in link sequence.

The regulator core currently initializes as a core_initcall() to be
available early ... but then it links way late, throwing away that
benefit, so regulators available at e.g. subsys_initcall() are not
available to subsystems which need to use them.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2009-01-08 20:10:32 +00:00
David Brownell b8da8677d4 USB: move isp1301_omap to drivers/usb/otg
This moves the isp1301-omap driver from the drivers/i2c/chips
directory (which will be shrinking) into a new drivers/usb/otg
directory (which will grow, with more drivers and utilities).

Note that OTG infrastructure needs to be initialized before
either host or peripheral side USB support, and may be needed
before for pure host or pure peripheral configurations.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07 10:00:02 -08:00
Len Brown 41b16dce39 create drivers/platform/x86/ from drivers/misc/
Move x86 platform specific drivers from drivers/misc/
to a new home under drivers/platform/x86/.

The community has been maintaining x86 vendor-specific
platform specific drivers under /drivers/misc/ for a few years.
The oldest ones started life under drivers/acpi.
They moved out of drivers/acpi/ because they don't actually
implement the ACPI specification, but either simply
use ACPI, or implement vendor-specific ACPI extensions.

In the future we anticipate...
drivers/misc/ will go away.
other architectures will create drivers/platform/<arch>

Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-19 04:42:32 -05:00
Linus Torvalds eba966a4e7 Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb
* 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb:
  uwb: build UWB before USB/WUSB
2008-10-26 16:35:46 -07:00
David Vrabel ae5d82cb8d uwb: build UWB before USB/WUSB
The WHCI-HCD driver in drivers/usb/host/ depends on the umc driver in
drivers/uwb/.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-10-24 16:46:22 +01:00
Linus Torvalds 765426e8ee Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (123 commits)
  dock: make dock driver not a module
  ACPI: fix ia64 build warning
  ACPI: hack around sysfs warning with link order
  ACPI suspend: fix build warning when CONFIG_ACPI_SLEEP=n
  intel_menlo: fix build warning
  panasonic-laptop: fix build
  ACPICA: Update version to 20080926
  ACPICA: Add support for zero-length buffer-to-string conversions
  ACPICA: New: Validation for predefined ACPI methods/objects
  ACPICA: Fix for implicit return compatibility
  ACPICA: Fixed a couple memory leaks associated with "implicit return"
  ACPICA: Optimize buffer allocation procedure
  ACPICA: Fix possible memory leak, error exit path
  ACPICA: Fix fault after mem allocation failure in AML parser
  ACPICA: Remove unused ACPI register bit definition
  ACPICA: Update version to 20080829
  ACPICA: Fix possible memory leak in acpi_ns_get_external_pathname
  ACPICA: Cleanup for internal Reference Object
  ACPICA: Update comments - no functional changes
  ACPICA: Update for Reference ACPI_OPERAND_OBJECT
  ...
2008-10-23 10:20:36 -07:00
Len Brown 057316cc6a Merge branch 'linus' into test
Conflicts:
	MAINTAINERS
	arch/x86/kernel/acpi/boot.c
	arch/x86/kernel/acpi/sleep.c
	drivers/acpi/Kconfig
	drivers/pnp/Makefile
	drivers/pnp/quirks.c

Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-23 00:11:07 -04:00
Andy Henroid 27471fdb32 i7300_idle driver v1.55
The Intel 7300 Memory Controller supports dynamic throttling of memory which can
be used to save power when system is idle. This driver does the memory
throttling when all CPUs are idle on such a system.

Refer to "Intel 7300 Memory Controller Hub (MCH)" datasheet
for the config space description.

Signed-off-by: Andy Henroid <andrew.d.henroid@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
2008-10-21 23:58:41 -04:00
David Vrabel 61e0e79ee3 Merge branch 'master' into for-upstream
Conflicts:

	Documentation/ABI/testing/sysfs-bus-usb
	drivers/Makefile
2008-10-20 16:07:19 +01:00
Greg Kroah-Hartman 3504558913 Staging: add Kconfig entries and Makefile infrastructure
This hooks up the drivers/staging directory to the build system

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-10 15:31:06 -07:00
Greg Kroah-Hartman 2f86c3e67d uwb: add the UWB stack (build system)
The Kbuild and Kconfig files.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:25 +01:00
Felipe Balbi 550a7375fe USB: Add MUSB and TUSB support
This patch adds support for MUSB and TUSB controllers
integrated into omap2430 and davinci. It also adds support
for external tusb6010 controller.

Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-13 17:33:00 -07:00
Liam Girdwood ba7e476343 regulator: core kbuild files
This patch adds kernel build support for the regulator core.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
2008-07-30 10:10:22 +01:00
Michael Buesch 7444a72eff gpiolib: allow user-selection
This patch adds functionality to the gpio-lib subsystem to make it
possible to enable the gpio-lib code even if the architecture code didn't
request to get it built in.

The archtitecture code does still need to implement the gpiolib accessor
functions in its asm/gpio.h file.  This patch adds the implementations for
x86 and PPC.

With these changes it is possible to run generic GPIO expansion cards on
every architecture that implements the trivial wrapper functions.  Support
for more architectures can easily be added.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: David Brownell <david-b@pacbell.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Samuel Ortiz <sameo@openedhand.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 10:53:30 -07:00
Dave Airlie e6b51632b3 gpu: re-order GPU subdirectory vs char for AGP vs DRM startup.
Signed-off-by: Dave Airlie <airlied@linux.ie>
2008-07-21 08:42:49 +10:00
Dave Airlie c0e09200dc drm: reorganise drm tree to be more future proof.
With the coming of kernel based modesetting and the memory manager stuff,
the everything in one directory approach was getting very ugly and
starting to be unmanageable.

This restructures the drm along the lines of other kernel components.

It creates a drivers/gpu/drm directory and moves the hw drivers into
subdirectores. It moves the includes into an include/drm, and
sets up the unifdef for the userspace headers we should be exporting.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-07-14 10:45:01 +10:00
Samuel Thibault f7511d5f66 Basic braille screen reader support
This adds a minimalistic braille screen reader support.  This is meant to
be used by blind people e.g.  on boot failures or when / cannot be mounted
etc and thus the userland screen readers can not work.

[akpm@linux-foundation.org: fix exports]
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Jiri Kosina <jikos@jikos.cz>
Cc: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Alan Cox <alan@redhat.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-30 08:29:52 -07:00
Alex Dubov baf8532a14 memstick: initial commit for Sony MemoryStick support
Sony MemoryStick cards are used in many products manufactured by Sony.
They are available both as storage and as IO expansion cards.  Currently,
only MemoryStick Pro storage cards are supported via TI FlashMedia
MemoryStick interface.

[mboton@gmail.com: biuld fix]
[akpm@linux-foundation.org: build fix]
Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Miguel Boton <mboton@gmail.co>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-09 11:08:34 -08:00
Len Brown 26b6f22366 Merge branches 'release' and 'menlo' into release
Conflicts:

	drivers/acpi/video.c

Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-07 03:18:04 -05:00
David Brownell a9c5fff542 gpiolib: add drivers/gpio directory
Add an empty drivers/gpio directory for gpiolib infrastructure and GPIO
expanders.  It will be populated by later patches.

This won't be the only place to hold such gpio_chip code.  Many external chips
add a few GPIOs as secondary functionality (such as MFD drivers) and platform
code frequently needs to closely integrate GPIO and IRQ support.

This is placed *early* in the build/link sequence since it's common for other
drivers to depend on GPIOs to do their work, so they must be initialized early
in the device_initcall() sequence.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Jean Delvare <khali@linux-fr.org>
Cc: Eric Miao <eric.miao@marvell.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ben Gardner <bgardner@wabtec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:12 -08:00
Zhang Rui 203d3d4aa4 the generic thermal sysfs driver
The Generic Thermal sysfs driver for thermal management.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Thomas Sujith <sujith.thomas@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 23:12:19 -05:00
Linus Torvalds d145c7253c Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (27 commits)
  lguest: use __PAGE_KERNEL instead of _PAGE_KERNEL
  lguest: Use explicit includes rateher than indirect
  lguest: get rid of lg variable assignments
  lguest: change gpte_addr header
  lguest: move changed bitmap to lg_cpu
  lguest: move last_pages to lg_cpu
  lguest: change last_guest to last_cpu
  lguest: change spte_addr header
  lguest: per-vcpu lguest pgdir management
  lguest: make pending notifications per-vcpu
  lguest: makes special fields be per-vcpu
  lguest: per-vcpu lguest task management
  lguest: replace lguest_arch with lg_cpu_arch.
  lguest: make registers per-vcpu
  lguest: make emulate_insn receive a vcpu struct.
  lguest: map_switcher_in_guest() per-vcpu
  lguest: per-vcpu interrupt processing.
  lguest: per-vcpu lguest timers
  lguest: make hypercalls use the vcpu struct
  lguest: make write() operation smp aware
  ...

Manual conflict resolved (maybe even correctly, who knows) in
drivers/lguest/x86/core.c
2008-01-31 09:35:32 +11:00
Avi Kivity edf884172e KVM: Move arch dependent files to new directory arch/x86/kvm/
This paves the way for multiple architecture support.  Note that while
ioapic.c could potentially be shared with ia64, it is also moved.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-01-30 18:01:18 +02:00
Bernhard Kaindl f212ec4b7b x86: early boot debugging via FireWire (ohci1394_dma=early)
This patch adds a new configuration option, which adds support for a new
early_param which gets checked in arch/x86/kernel/setup_{32,64}.c:setup_arch()
to decide wether OHCI-1394 FireWire controllers should be initialized and
enabled for physical DMA access to allow remote debugging of early problems
like issues ACPI or other subsystems which are executed very early.

If the config option is not enabled, no code is changed, and if the boot
paramenter is not given, no new code is executed, and independent of that,
all new code is freed after boot, so the config option can be even enabled
in standard, non-debug kernels.

With specialized tools, it is then possible to get debugging information
from machines which have no serial ports (notebooks) such as the printk
buffer contents, or any data which can be referenced from global pointers,
if it is stored below the 4GB limit and even memory dumps of of the physical
RAM region below the 4GB limit can be taken without any cooperation from the
CPU of the host, so the machine can be crashed early, it does not matter.

In the extreme, even kernel debuggers can be accessed in this way. I wrote
a small kgdb module and an accompanying gdb stub for FireWire which allows
to gdb to talk to kgdb using remote remory reads and writes over FireWire.

An version of the gdb stub fore FireWire is able to read all global data
from a system which is running a a normal kernel without any kernel debugger,
without any interruption or support of the system's CPU. That way, e.g. the
task struct and so on can be read and even manipulated when the physical DMA
access is granted.

A HOWTO is included in this patch, in Documentation/debugging-via-ohci1394.txt
and I've put a copy online at
ftp://ftp.suse.de/private/bk/firewire/docs/debugging-via-ohci1394.txt

It also has links to all the tools which are available to make use of it
another copy of it is online at:
ftp://ftp.suse.de/private/bk/firewire/kernel/ohci1394_dma_early-v2.diff

Signed-Off-By: Bernhard Kaindl <bk@suse.de>
Tested-By: Thomas Renninger <trenn@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:34:11 +01:00
Glauber de Oliveira Costa 7ea08093e0 lguest: fix drivers/lguest Makefile entry
Parts depend on CONFIG_LGUEST, not just CONFIG_LGUEST_GUEST

Signed-off-by: Glauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-01-30 22:50:02 +11:00
Linus Torvalds 1212663fba Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (39 commits)
  [SCSI] qla2xxx: Update version number to 8.02.00-k5.
  [SCSI] qla2xxx: Correct display of ISP serial-number.
  [SCSI] qla2xxx: Correct residual-count handling discrepancies during UNDERRUN handling.
  [SCSI] qla2xxx: Make driver (mostly) legacy I/O port free.
  [SCSI] qla2xxx: Fix issue where final flash-segment updates were falling into the slow-path write handler.
  [SCSI] qla2xxx: Handle unaligned sector writes during NVRAM/VPD updates.
  [SCSI] qla2xxx: Defer explicit interrupt-polling processing to init-time scenarios.
  [SCSI] qla2xxx: Resync with latest HBA SSID specification -- 2.2u.
  [SCSI] sym53c8xx: Remove sym_xpt_async_sent_bdr
  [SCSI] sym53c8xx: Remove pci_dev pointer from sym_shcb
  [SCSI] sym53c8xx: Make interrupt handler capable of returning IRQ_NONE
  [SCSI] sym53c8xx: Get rid of IRQ_FMT and IRQ_PRM
  [SCSI] sym53c8xx: Use scmd_printk where appropriate
  [SCSI] sym53c8xx: Simplify DAC DMA handling
  [SCSI] sym53c8xx: Remove tag_ctrl module parameter
  [SCSI] sym53c8xx: Remove io_ws, mmio_ws and ram_ws elements
  [SCSI] sym53c8xx: Remove ->device_id
  [SCSI] sym53c8xx: Use pdev->revision
  [SCSI] sym53c8xx: PCI Error Recovery support
  [SCSI] sym53c8xx: Stop overriding scsi_done
  ...
2007-10-23 16:37:29 -07:00
Rusty Russell ec3d41c4db Virtio interface
This attempts to implement a "virtual I/O" layer which should allow
common drivers to be efficiently used across most virtual I/O
mechanisms.  It will no-doubt need further enhancement.

The virtio drivers add buffers to virtio queues; as the buffers are consumed
the driver "interrupt" callbacks are invoked.

There is also a generic implementation of config space which drivers can query
to get setup information from the host.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Dor Laor <dor.laor@qumranet.com>
Cc: Arnd Bergmann <arnd@arndb.de>
2007-10-23 15:49:54 +10:00
Linus Torvalds c4ec207173 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (41 commits)
  ACPICA: hw: Don't carry spinlock over suspend
  ACPICA: hw: remove use_lock flag from acpi_hw_register_{read, write}
  ACPI: cpuidle: port idle timer suspend/resume workaround to cpuidle
  ACPI: clean up acpi_enter_sleep_state_prep
  Hibernation: Make sure that ACPI is enabled in acpi_hibernation_finish
  ACPI: suppress uninitialized var warning
  cpuidle: consolidate 2.6.22 cpuidle branch into one patch
  ACPI: thinkpad-acpi: skip blanks before the data when parsing sysfs
  ACPI: AC: Add sysfs interface
  ACPI: SBS: Add sysfs alarm
  ACPI: SBS: Add ACPI_PROCFS around procfs handling code.
  ACPI: SBS: Add support for power_supply class (and sysfs)
  ACPI: SBS: Make SBS reads table-driven.
  ACPI: SBS: Simplify data structures in SBS
  ACPI: SBS: Split host controller (ACPI0001) from SBS driver (ACPI0002)
  ACPI: EC: Add new query handler to list head.
  ACPI: Add acpi_bus_generate_event4() function
  ACPI: Battery: add sysfs alarm
  ACPI: Battery: Add sysfs support
  ACPI: Battery: Misc clean-ups, no functional changes
  ...

Fix up conflicts in drivers/misc/thinkpad_acpi.[ch] manually
2007-10-19 13:12:46 -07:00
Wim Van Sebroeck b7e04f8c61 mv watchdog tree under drivers
move watchdog tree from drivers/char/watchdog to drivers/watchdog.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-10-18 10:39:03 +00:00
Matthew Wilcox 1ecd3902c6 [SCSI] fc4: remove this and all associated drivers
This code has been slowly rotting for about eight years.  It's currently
impeding a few SCSI cleanups, and nobody seems to have hardware to test
it any more.  I talked to Dave Miller about it, and he agrees we can
delete it.  If anyone wants a software FC stack in future, they can
retrieve this driver from git.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-17 21:53:55 -04:00
Shannon Nelson 7589670f37 DCA: Add Direct Cache Access driver
Direct Cache Access (DCA) is a method for warming the CPU cache before data
is used, with the intent of lessening the impact of cache misses.  This
patch adds a manager and interface for matching up client requests for DCA
services with devices that offer DCA services.

In order to use DCA, a module must do bus writes with the appropriate tag
bits set to trigger a cache read for a specific CPU.  However, different
CPUs and chipsets can require different sets of tag bits, and the methods
for determining the correct bits may be simple hardcoding or may be a
hardware specific magic incantation.  This interface is a way for DCA
clients to find the correct tag bits for the targeted CPU without needing
to know the specifics.

    [Dave Miller] use DEFINE_SPINLOCK()

Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 09:43:09 -07:00
Michael Buesch 61e115a56d [SSB]: add Sonics Silicon Backplane bus support
SSB is an SoC bus used in a number of embedded devices.  The most
well-known of these devices is probably the Linksys WRT54G, but there
are others as well.  The bus is also used internally on the BCM43xx
and BCM44xx devices from Broadcom.

This patch also includes support for SSB ID tables in modules, so
that SSB drivers can be loaded automatically.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:51:36 -07:00
Len Brown 4f86d3a8e2 cpuidle: consolidate 2.6.22 cpuidle branch into one patch
commit e5a16b1f9eec0af7cfa0830304b41c1c0833cf9f
Author: Len Brown <len.brown@intel.com>
Date:   Tue Oct 2 23:44:44 2007 -0400

    cpuidle: shrink diff

    processor_idle.c |  440 +++++++++++++++++++++++++++++++++++++++++--
    1 file changed, 429 insertions(+), 11 deletions(-)

    Signed-off-by: Len Brown <len.brown@intel.com>

commit dfbb9d5aedfb18848a3e0d6f6e3e4969febb209c
Author: Len Brown <len.brown@intel.com>
Date:   Wed Sep 26 02:17:55 2007 -0400

    cpuidle: reduce diff size

    Reduces the cpuidle processor_idle.c diff vs 2.6.22 from this
     processor_idle.c | 2006 ++++++++++++++++++++++++++-----------------
     1 file changed, 1219 insertions(+), 787 deletions(-)

    to this:
     processor_idle.c |  502 +++++++++++++++++++++++++++++++++++++++----
     1 file changed, 458 insertions(+), 44 deletions(-)

    ...for the purpose of making the cpuilde patch less invasive
    and easier to review.

    no functional changes.  build tested only.

    Signed-off-by: Len Brown <len.brown@intel.com>

commit 889172fc915f5a7fe20f35b133cbd205ce69bf6c
Author: Venki Pallipadi <venkatesh.pallipadi@intel.com>
Date:   Thu Sep 13 13:40:05 2007 -0700

    cpuidle: Retain old ACPI policy for !CONFIG_CPU_IDLE

    Retain the old policy in processor_idle, so that when CPU_IDLE is not
    configured, old C-state policy will still be used. This provides a
    clean gradual migration path from old ACPI policy to new cpuidle
    based policy.

    Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit 9544a8181edc7ecc33b3bfd69271571f98ed08bc
Author: Venki Pallipadi <venkatesh.pallipadi@intel.com>
Date:   Thu Sep 13 13:39:17 2007 -0700

    cpuidle: Configure governors by default

    Quoting Len "Do not give an option to users to shoot themselves in the foot".

    Remove the configurability of ladder and menu governors as they are
    needed for default policy of cpuidle. That way users will not be able to
    have cpuidle without any policy loosing all C-state power savings.

    Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit 8975059a2c1e56cfe83d1bcf031bcf4cb39be743
Author: Adam Belay <abelay@novell.com>
Date:   Tue Aug 21 18:27:07 2007 -0400

    CPUIDLE: load ACPI properly when CPUIDLE is disabled

    Change the registration return codes for when CPUIDLE
    support is not compiled into the kernel.  As a result, the ACPI
    processor driver will load properly even if CPUIDLE is unavailable.
    However, it may be possible to cleanup the ACPI processor driver further
    and eliminate some dead code paths.

    Signed-off-by: Adam Belay <abelay@novell.com>
    Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit e0322e2b58dd1b12ec669bf84693efe0dc2414a8
Author: Adam Belay <abelay@novell.com>
Date:   Tue Aug 21 18:26:06 2007 -0400

    CPUIDLE: remove cpuidle_get_bm_activity()

    Remove cpuidle_get_bm_activity() and updates governors
    accordingly.

    Signed-off-by: Adam Belay <abelay@novell.com>
    Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit 18a6e770d5c82ba26653e53d240caa617e09e9ab
Author: Adam Belay <abelay@novell.com>
Date:   Tue Aug 21 18:25:58 2007 -0400

    CPUIDLE: max_cstate fix

    Currently max_cstate is limited to 0, resulting in no idle processor
    power management on ACPI platforms.  This patch restores the value to
    the array size.

    Signed-off-by: Adam Belay <abelay@novell.com>
    Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit 1fdc0887286179b40ce24bcdbde663172e205ef0
Author: Adam Belay <abelay@novell.com>
Date:   Tue Aug 21 18:25:40 2007 -0400

    CPUIDLE: handle BM detection inside the ACPI Processor driver

    Update the ACPI processor driver to detect BM activity and
    limit state entry depth internally, rather than exposing such
    requirements to CPUIDLE.  As a result, CPUIDLE can drop this
    ACPI-specific interface and become more platform independent.  BM
    activity is now handled much more aggressively than it was in the
    original implementation, so some testing coverage may be needed to
    verify that this doesn't introduce any DMA buffer under-run issues.

    Signed-off-by: Adam Belay <abelay@novell.com>
    Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit 0ef38840db666f48e3cdd2b769da676c57228dd9
Author: Adam Belay <abelay@novell.com>
Date:   Tue Aug 21 18:25:14 2007 -0400

    CPUIDLE: menu governor updates

    Tweak the menu governor to more effectively handle non-timer
    break events.  Non-timer break events are detected by comparing the
    actual sleep time to the expected sleep time.  In future revisions, it
    may be more reliable to use the timer data structures directly.

    Signed-off-by: Adam Belay <abelay@novell.com>
    Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit bb4d74fca63fa96cf3ace644b15ae0f12b7df5a1
Author: Adam Belay <abelay@novell.com>
Date:   Tue Aug 21 18:24:40 2007 -0400

    CPUIDLE: fix 'current_governor' sysfs entry

    Allow the "current_governor" sysfs entry to properly handle
    input terminated with '\n'.

    Signed-off-by: Adam Belay <abelay@novell.com>
    Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit df3c71559bb69b125f1a48971bf0d17f78bbdf47
Author: Len Brown <len.brown@intel.com>
Date:   Sun Aug 12 02:00:45 2007 -0400

    cpuidle: fix IA64 build (again)

    Signed-off-by: Len Brown <len.brown@intel.com>

commit a02064579e3f9530fd31baae16b1fc46b5a7bca8
Author: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date:   Sun Aug 12 01:39:27 2007 -0400

    cpuidle: Remove support for runtime changing of max_cstate

    Remove support for runtime changeability of max_cstate. Drivers can use
    use latency APIs.

    max_cstate can still be used as a boot time option and dmi override.

    Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit 0912a44b13adf22f5e3f607d263aed23b4910d7e
Author: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date:   Sun Aug 12 01:39:16 2007 -0400

    cpuidle: Remove ACPI cstate_limit calls from ipw2100

    ipw2100 already has code to use accetable_latency interfaces to limit the
    C-state. Remove the calls to acpi_set_cstate_limit and acpi_get_cstate_limit
    as they are redundant.

    Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit c649a76e76be6bff1fd770d0a775798813a3f6e0
Author: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date:   Sun Aug 12 01:35:39 2007 -0400

    cpuidle: compile fix for pause and resume functions

    Fix the compilation failure when cpuidle is not compiled in.

    Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
    Acked-by: Adam Belay <adam.belay@novell.com>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit 2305a5920fb8ee6ccec1c62ade05aa8351091d71
Author: Adam Belay <abelay@novell.com>
Date:   Thu Jul 19 00:49:00 2007 -0400

    cpuidle: re-write

    Some portions have been rewritten to make the code cleaner and lighter
    weight.  The following is a list of changes:

    1.) the state name is now included in the sysfs interface
    2.) detection, hotplug, and available state modifications are handled by
    CPUIDLE drivers directly
    3.) the CPUIDLE idle handler is only ever installed when at least one
    cpuidle_device is enabled and ready
    4.) the menu governor BM code no longer overflows
    5.) the sysfs attributes are now printed as unsigned integers, avoiding
    negative values
    6.) a variety of other small cleanups

    Also, Idle drivers are no longer swappable during runtime through the
    CPUIDLE sysfs inteface.  On i386 and x86_64 most idle handlers (e.g.
    poll, mwait, halt, etc.) don't benefit from an infrastructure that
    supports multiple states, so I think using a more general case idle
    handler selection mechanism would be cleaner.

    Signed-off-by: Adam Belay <abelay@novell.com>
    Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
    Acked-by: Shaohua Li <shaohua.li@intel.com>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit df25b6b56955714e6e24b574d88d1fd11f0c3ee5
Author: Len Brown <len.brown@intel.com>
Date:   Tue Jul 24 17:08:21 2007 -0400

    cpuidle: fix IA64 buid

    Signed-off-by: Len Brown <len.brown@intel.com>

commit fd6ada4c14488755ff7068860078c437431fbccd
Author: Adrian Bunk <bunk@stusta.de>
Date:   Mon Jul 9 11:33:13 2007 -0700

    cpuidle: static

    make cpuidle_replace_governor() static

    Signed-off-by: Adrian Bunk <bunk@stusta.de>
    Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
    Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit c1d4a2cebcadf2429c0c72e1d29aa2a9684c32e0
Author: Adrian Bunk <bunk@stusta.de>
Date:   Tue Jul 3 00:54:40 2007 -0400

    cpuidle: static

    This patch makes the needlessly global struct menu_governor static.

    Signed-off-by: Adrian Bunk <bunk@stusta.de>
    Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit dbf8780c6e8d572c2c273da97ed1cca7608fd999
Author: Andrew Morton <akpm@linux-foundation.org>
Date:   Tue Jul 3 00:49:14 2007 -0400

    export symbol tick_nohz_get_sleep_length

    ERROR: "tick_nohz_get_sleep_length" [drivers/cpuidle/governors/menu.ko] undefined!
    ERROR: "tick_nohz_get_idle_jiffies" [drivers/cpuidle/governors/menu.ko] undefined!

    And please be sure to get your changes to core kernel suitably reviewed.

    Cc: Adam Belay <abelay@novell.com>
    Cc: Venki Pallipadi <venkatesh.pallipadi@intel.com>
    Cc: Ingo Molnar <mingo@elte.hu>
    Cc: Thomas Gleixner <tglx@linutronix.de>
    Cc: john stultz <johnstul@us.ibm.com>
    Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit 29f0e248e7017be15f99febf9143a2cef00b2961
Author: Andrew Morton <akpm@linux-foundation.org>
Date:   Tue Jul 3 00:43:04 2007 -0400

    tick.h needs hrtimer.h

    It uses hrtimers.

    Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit e40cede7d63a029e92712a3fe02faee60cc38fb4
Author: Venki Pallipadi <venkatesh.pallipadi@intel.com>
Date:   Tue Jul 3 00:40:34 2007 -0400

    cpuidle: first round of documentation updates

    Documentation changes based on Pavel's feedback.

    Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
    Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit 83b42be2efece386976507555c29e7773a0dfcd1
Author: Venki Pallipadi <venkatesh.pallipadi@intel.com>
Date:   Tue Jul 3 00:39:25 2007 -0400

    cpuidle: add rating to the governors and pick the one with highest rating by default

    Introduce a governor rating scheme to pick the right governor by default.

    Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
    Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit d2a74b8c5e8f22def4709330d4bfc4a29209b71c
Author: Venki Pallipadi <venkatesh.pallipadi@intel.com>
Date:   Tue Jul 3 00:38:08 2007 -0400

    cpuidle: make cpuidle sysfs driver governor switch off by default

    Make default cpuidle sysfs to show current_governor and current_driver in
    read-only mode.  More elaborate available_governors and available_drivers with
    writeable current_governor and current_driver interface only appear with
    "cpuidle_sysfs_switch" boot parameter.

    Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
    Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit 1f60a0e80bf83cf6b55c8845bbe5596ed8f6307b
Author: Venki Pallipadi <venkatesh.pallipadi@intel.com>
Date:   Tue Jul 3 00:37:00 2007 -0400

    cpuidle: menu governor: change the early break condition

    Change the C-state early break out algorithm in menu governor.

    We only look at early breakouts that result in wakeups shorter than idle
    state's target_residency.  If such a breakout is frequent enough, eliminate
    the particular idle state upto a timeout period.

    Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
    Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit 45a42095cf64b003b4a69be3ce7f434f97d7af51
Author: Venki Pallipadi <venkatesh.pallipadi@intel.com>
Date:   Tue Jul 3 00:35:38 2007 -0400

    cpuidle: fix uninitialized variable in sysfs routine

    Fix the uninitialized usage of ret.

    Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
    Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit 80dca7cdba3e6ee13eae277660873ab9584eb3be
Author: Venki Pallipadi <venkatesh.pallipadi@intel.com>
Date:   Tue Jul 3 00:34:16 2007 -0400

    cpuidle: reenable /proc/acpi//power interface for the time being

    Keep /proc/acpi/processor/CPU*/power around for a while as powertop depends
    on it. It will be marked deprecated and removed in future. powertop can use
    cpuidle interfaces instead.

    Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
    Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit 589c37c2646c5e3813a51255a5ee1159cb4c33fc
Author: Venki Pallipadi <venkatesh.pallipadi@intel.com>
Date:   Tue Jul 3 00:32:37 2007 -0400

    cpuidle: menu governor and hrtimer compile fix

    Compile fix for menu governor.

    Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
    Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit 0ba80bd9ab3ed304cb4f19b722e4cc6740588b5e
Author: Len Brown <len.brown@intel.com>
Date:   Thu May 31 22:51:43 2007 -0400

    cpuidle: build fix - cpuidle vs ipw2100 module

    ERROR: "acpi_set_cstate_limit" [drivers/net/wireless/ipw2100.ko] undefined!

    Signed-off-by: Len Brown <len.brown@intel.com>

commit d7d8fa7f96a7f7682be7c6cc0cc53fa7a18c3b58
Author: Adam Belay <abelay@novell.com>
Date:   Sat Mar 24 03:47:07 2007 -0400

    cpuidle: add the 'menu' governor

    Here is my first take at implementing an idle PM governor that takes
    full advantage of NO_HZ.  I call it the 'menu' governor because it
    considers the full list of idle states before each entry.

    I've kept the implementation fairly simple.  It attempts to guess the
    next residency time and then chooses a state that would meet at least
    the break-even point between power savings and entry cost.  To this end,
    it selects the deepest idle state that satisfies the following
    constraints:
         1. If the idle time elapsed since bus master activity was detected
            is below a threshold (currently 20 ms), then limit the selection
            to C2-type or above.
         2. Do not choose a state with a break-even residency that exceeds
            the expected time remaining until the next timer interrupt.
         3. Do not choose a state with a break-even residency that exceeds
            the elapsed time between the last pair of break events,
            excluding timer interrupts.

    This governor has an advantage over "ladder" governor because it
    proactively checks how much time remains until the next timer interrupt
    using the tick infrastructure.  Also, it handles device interrupt
    activity more intelligently by not including timer interrupts in break
    event calculations.  Finally, it doesn't make policy decisions using the
    number of state entries, which can have variable residency times (NO_HZ
    makes these potentially very large), and instead only considers sleep
    time deltas.

    The menu governor can be selected during runtime using the cpuidle sysfs
    interface like so:
    "echo "menu" > /sys/devices/system/cpu/cpuidle/current_governor"

    Signed-off-by: Adam Belay <abelay@novell.com>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit a4bec7e65aa3b7488b879d971651cc99a6c410fe
Author: Adam Belay <abelay@novell.com>
Date:   Sat Mar 24 03:47:03 2007 -0400

    cpuidle: export time until next timer interrupt using NO_HZ

    Expose information about the time remaining until the next
    timer interrupt expires by utilizing the dynticks infrastructure.
    Also modify the main idle loop to allow dynticks to handle
    non-interrupt break events (e.g. DMA).  Finally, expose sleep ticks
    information to external code.  Thomas Gleixner is responsible for much
    of the code in this patch.  However, I've made some additional changes,
    so I'm probably responsible if there are any bugs or oversights :)

    Signed-off-by: Adam Belay <abelay@novell.com>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit 2929d8996fbc77f41a5ff86bb67cdde3ca7d2d72
Author: Adam Belay <abelay@novell.com>
Date:   Sat Mar 24 03:46:58 2007 -0400

    cpuidle: governor API changes

    This patch prepares cpuidle for the menu governor.  It adds an optional
    stage after idle state entry to give the governor an opportunity to
    check why the state was exited.  Also it makes sure the idle loop
    returns after each state entry, allowing the appropriate dynticks code
    to run.

    Signed-off-by: Adam Belay <abelay@novell.com>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit 3a7fd42f9825c3b03e364ca59baa751bb350775f
Author: Venki Pallipadi <venkatesh.pallipadi@intel.com>
Date:   Thu Apr 26 00:03:59 2007 -0700

    cpuidle: hang fix

    Prevent hang on x86-64, when ACPI processor driver is added as a module on
    a system that does not support C-states.

    x86-64 expects all idle handlers to enable interrupts before returning from
    idle handler.  This is due to enter_idle(), exit_idle() races.  Make
    cpuidle_idle_call() confirm to this when there is no pm_idle_old.

    Also, cpuidle look at the return values of attch_driver() and set
    current_driver to NULL if attach fails on all CPUs.

    Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
    Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit 4893339a142afbd5b7c01ffadfd53d14746e858e
Author: Shaohua Li <shaohua.li@intel.com>
Date:   Thu Apr 26 10:40:09 2007 +0800

    cpuidle: add support for max_cstate limit

    With CPUIDLE framework, the max_cstate (to limit max cpu c-state)
    parameter is ingored. Some systems require it to ignore C2/C3
    and some drivers like ipw require it too.

    Signed-off-by: Shaohua Li <shaohua.li@intel.com>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit 43bbbbe1cb998cbd2df656f55bb3bfe30f30e7d1
Author: Shaohua Li <shaohua.li@intel.com>
Date:   Thu Apr 26 10:40:13 2007 +0800

    cpuidle: add cpuidle_fore_redetect_devices API

    add cpuidle_force_redetect_devices API,
    which forces all CPU redetect idle states.
    Next patch will use it.

    Signed-off-by: Shaohua Li <shaohua.li@intel.com>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit d1edadd608f24836def5ec483d2edccfb37b1d19
Author: Shaohua Li <shaohua.li@intel.com>
Date:   Thu Apr 26 10:40:01 2007 +0800

    cpuidle: fix sysfs related issue

    Fix the cpuidle sysfs issue.
    a. make kobject dynamicaly allocated
    b. fixed sysfs init issue to avoid suspend/resume issue

    Signed-off-by: Shaohua Li <shaohua.li@intel.com>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit 7169a5cc0d67b263978859672e86c13c23a5570d
Author: Randy Dunlap <randy.dunlap@oracle.com>
Date:   Wed Mar 28 22:52:53 2007 -0400

    cpuidle: 1-bit field must be unsigned

    A 1-bit bitfield has no room for a sign bit.
    drivers/cpuidle/governors/ladder.c:54:16: error: dubious bitfield without explicit `signed' or `unsigned'

    Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
    Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
    Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit 4658620158dc2fbd9e4bcb213c5b6fb5d05ba7d4
Author: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date:   Wed Mar 28 22:52:41 2007 -0400

    cpuidle: fix boot hang

    Patch for cpuidle boot hang reported by Larry Finger here.
    http://www.ussg.iu.edu/hypermail/linux/kernel/0703.2/2025.html

    Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
    Cc: Larry Finger <larry.finger@lwfinger.net>
    Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit c17e168aa6e5fe3851baaae8df2fbc1cf11443a9
Author: Len Brown <len.brown@intel.com>
Date:   Wed Mar 7 04:37:53 2007 -0500

    cpuidle: ladder does not depend on ACPI

    build fix for CONFIG_ACPI=n

    In file included from drivers/cpuidle/governors/ladder.c:21:
    include/acpi/processor.h:88: error: expected specifier-qualifier-list before ‘acpi_integer’
    include/acpi/processor.h:106: error: expected specifier-qualifier-list before ‘acpi_integer’
    include/acpi/processor.h:168: error: expected specifier-qualifier-list before ‘acpi_handle’

    Signed-off-by: Len Brown <len.brown@intel.com>

commit 8c91d958246bde68db0c3f0c57b535962ce861cb
Author: Adrian Bunk <bunk@stusta.de>
Date:   Tue Mar 6 02:29:40 2007 -0800

    cpuidle: make code static

    This patch makes the following needlessly global code static:
    - driver.c: __cpuidle_find_driver()
    - governor.c: __cpuidle_find_governor()
    - ladder.c: struct ladder_governor

    Signed-off-by: Adrian Bunk <bunk@stusta.de>
    Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
    Cc: Adam Belay <abelay@novell.com>
    Cc: Shaohua Li <shaohua.li@intel.com>
    Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit 0c39dc3187094c72c33ab65a64d2017b21f372d2
Author: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date:   Wed Mar 7 02:38:22 2007 -0500

    cpu_idle: fix build break

    This patch fixes a build breakage with !CONFIG_HOTPLUG_CPU and
    CONFIG_CPU_IDLE.

    Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
    Signed-off-by: Adrian Bunk <bunk@stusta.de>
    Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit 8112e3b115659b07df340ef170515799c0105f82
Author: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date:   Tue Mar 6 02:29:39 2007 -0800

    cpuidle: build fix for !CPU_IDLE

    Fix the compile issues when CPU_IDLE is not configured.

    Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
    Cc: Adam Belay <abelay@novell.com>
    Cc: Shaohua Li <shaohua.li@intel.com>
    Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit 1eb4431e9599cd25e0d9872f3c2c8986821839dd
Author: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date:   Thu Feb 22 13:54:57 2007 -0800

    cpuidle take2: Basic documentation for cpuidle

    Documentation for cpuidle infrastructure

    Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
    Signed-off-by: Adam Belay <abelay@novell.com>
    Signed-off-by: Shaohua Li <shaohua.li@intel.com>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit ef5f15a8b79123a047285ec2e3899108661df779
Author: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date:   Thu Feb 22 13:54:03 2007 -0800

    cpuidle take2: Hookup ACPI C-states driver with cpuidle

    Hookup ACPI C-states onto generic cpuidle infrastructure.

    drivers/acpi/procesor_idle.c is now a ACPI C-states driver that registers as
    a driver in cpuidle infrastructure and the policy part is removed from
    drivers/acpi/processor_idle.c. We use governor in cpuidle instead.

    Signed-off-by: Shaohua Li <shaohua.li@intel.com>
    Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
    Signed-off-by: Adam Belay <abelay@novell.com>
    Signed-off-by: Len Brown <len.brown@intel.com>

commit 987196fa82d4db52c407e8c9d5dec884ba602183
Author: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date:   Thu Feb 22 13:52:57 2007 -0800

    cpuidle take2: Core cpuidle infrastructure

    Announcing 'cpuidle', a new CPU power management infrastructure to manage
    idle CPUs in a clean and efficient manner.
    cpuidle separates out the drivers that can provide support for multiple types
    of idle states and policy governors that decide on what idle state to use
    at run time.
    A cpuidle driver can support multiple idle states based on parameters like
    varying power consumption, wakeup latency, etc (ACPI C-states for example).
    A cpuidle governor can be usage model specific (laptop, server,
    laptop on battery etc).
    Main advantage of the infrastructure being, it allows independent development
    of drivers and governors and allows for better CPU power management.

    A huge thanks to Adam Belay and Shaohua Li who were part of this mini-project
    since its beginning and are greatly responsible for this patchset.

    This patch:

    Core cpuidle infrastructure.
    Introduces a new abstraction layer for cpuidle:
    * which manages drivers that can support multiple idles states. Drivers
      can be generic or particular to specific hardware/platform
    * allows pluging in multiple policy governors that can take idle state policy
      decision
    * The core also has a set of sysfs interfaces with which administrato can know
      about supported drivers and governors and switch them at run time.

    Signed-off-by: Adam Belay <abelay@novell.com>
    Signed-off-by: Shaohua Li <shaohua.li@intel.com>
    Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
    Signed-off-by: Len Brown <len.brown@intel.com>

Signed-off-by: Len Brown <len.brown@intel.com>
2007-10-10 00:12:41 -04:00
Wim Van Sebroeck 647e50f383 [WATCHDOG] Fix pcwd_init_module crash
Fix for the problem detected by Ingo Molnar:
enabling CONFIG_PCWATCHDOG=y crashes bzImage bootup.

The reason for this can be found in drivers/makefile
We first do:
obj-y                           += char/
and later we do:
obj-y                           += base/ block/ misc/ mfd/ net/ media/

So if we put a platform or isa or usb bus driver in char/watchdog
(which is called from the Makefile in drivers/char/Makefile)
then we didn't have the different device drivers initialized yet
(they are in drivers/base and drivers/usb and ...)

This fix makes sure that we compile the watchdog drivers after
drivers/base, drivers/misc, drivers/pci and drivers/usb.
We also do the compile after hwmon because in the future the
watchdog temperature support will use the hwmon system.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2007-07-29 18:58:39 +00:00
Stephen Rothwell 97e873e5c8 Start split out of common open firmware code
This creates drivers/of/base.c (depending on CONFIG_OF) and puts
the first trivially common bits from the prom.c files into it.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Paul Mackerras <paulus@samba.org>
Acked-by: David S. Miller <davem@davemloft.net>
2007-07-20 13:28:41 +10:00
Rusty Russell 709e89266b lguest: the Makefile and Kconfig
This is the Kconfig and Makefile to allow lguest to actually be
compiled.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:52 -07:00
Hans J. Koch beafc54c4e UIO: Add the User IO core code
This interface allows the ability to write the majority of a driver in
userspace with only a very small shell of a driver in the kernel itself.
It uses a char device and sysfs to interact with a userspace process to
process interrupts and control memory accesses.

See the docbook documentation for more details on how to use this
interface.

From: Hans J. Koch <hjk@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-18 15:57:15 -07:00
Jeremy Fitzhardinge ad9a86121f xen: Add grant table support
Add Xen 'grant table' driver which allows granting of access to
selected local memory pages by other virtual machines and,
symmetrically, the mapping of remote memory pages which other virtual
machines have granted access to.

This driver is a prerequisite for many of the Xen virtual device
drivers, which grant the 'device driver domain' restricted and
temporary access to only those memory pages that are currently
involved in I/O operations.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ian Pratt <ian.pratt@xensource.com>
Signed-off-by: Christian Limpach <Christian.Limpach@cl.cam.ac.uk>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
2007-07-18 08:47:44 -07:00