Граф коммитов

1572 Коммитов

Автор SHA1 Сообщение Дата
Mario Limonciello cb32de1b7e nvme: Add quirk for LiteON CL1 devices running FW 22301111
One of the components in LiteON CL1 device has limitations that
can be encountered based upon boundary race conditions using the
nvme bus specific suspend to idle flow.

When this situation occurs the drive doesn't resume properly from
suspend-to-idle.

LiteON has confirmed this problem and fixed in the next firmware
version.  As this firmware is already in the field, avoid running
nvme specific suspend to idle flow.

Fixes: d916b1be94 ("nvme-pci: use host managed power state for suspend")
Link: http://lists.infradead.org/pipermail/linux-nvme/2019-July/thread.html
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Charles Hyde <charles.hyde@dellteam.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-20 11:02:10 -06:00
Guilherme G. Piccoli a89fcca818 nvme: Fix cntlid validation when not using NVMEoF
Commit 1b1031ca63 ("nvme: validate cntlid during controller initialisation")
introduced a validation for controllers with duplicate cntlid that runs
on nvme_init_subsystem(). The problem is that the validation relies on
ctrl->cntlid, and this value is assigned (from id_ctrl value) after the
call for nvme_init_subsystem() in nvme_init_identify() for non-fabrics
scenario. That leads to ctrl->cntlid always being 0 in case we have a
physical set of controllers in the same subsystem.

This patch fixes that by loading the discovered cntlid id_ctrl value into
ctrl->cntlid before the subsystem initialization, only for the non-fabrics
case. The patch was tested with emulated nvme devices (qemu) having two
controllers in a single subsystem. Without the patch, we couldn't make
it work failing in the duplicate check; when running with the patch, we
could see the subsystem holding both controllers.

For the fabrics case we see ctrl->cntlid has a more intricate relation
with the admin connect, so we didn't change that.

Fixes: 1b1031ca63 ("nvme: validate cntlid during controller initialisation")
Signed-off-by: Guilherme G. Piccoli <gpiccoli@canonical.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-20 11:02:10 -06:00
Anton Eidelman 504db087aa nvme-multipath: fix possible I/O hang when paths are updated
nvme_state_set_live() making a path available triggers requeue_work
in order to resubmit requests that ended up on requeue_list when no
paths were available.

This requeue_work may race with concurrent nvme_ns_head_make_request()
that do not observe the live path yet.
Such concurrent requests may by made by either:
- New IO submission.
- Requeue_work triggered by nvme_failover_req() or another ana_work.

A race may cause requeue_work capture the state of requeue_list before
more requests get onto the list. These requests will stay on the list
forever unless requeue_work is triggered again.

In order to prevent such race, nvme_state_set_live() should
synchronize_srcu(&head->srcu) before triggering the requeue_work and
prevent nvme_ns_head_make_request referencing an old snapshot of the
path list.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-20 11:02:10 -06:00
Linus Torvalds 8fde2832bd for-linus-2019-08-17
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl1Ygq4QHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpjUnD/47XM1xHO2L/66+XiRnXwNc0Zmc0cNrtIsp
 09EqZFeSwaqJKfoodcDphuHSYf6jkLk9xRKiFEr+KrUfzwvmgN3fFlbk6Azz0A4f
 ACv4DtTPML40QUGzo5c+UfnJTwK8z4An/lG4aNDB3UucFwoWhfvLkzQAN+FNilAQ
 sMTWPvhjiV/E7BMa7p108/NL9sv0UzUzgIOI7cZCq/Z5/jJBiohl4DzPPyfCKzOK
 shKP3Q7zId2q7d9zJZZuwy/iYLTCEHzy+37hxS7343vXeTlxKbrxY6xKZ8Rhsccx
 E3ep+SYuRxl7BHXPTwFh5HSMRXq5JEVBy3dnoMzFEu6pqzAPyLjQS0tG/lR9T1uS
 E8t0QnsdjVvedF/c3a3b2pVcYCbRjHsB/5DLBPxRfgAPkvVm180XKQM95HkLQYle
 A74mgU1WODnXsdyJeAacf1b+3t8p+5x5vpRq6Ls6dgmGn74qhfvs4tQnqypFFnyR
 Le0O7ICWKotQFo0CzbPB029xORepq9HLkFEeh73K6uG+Bn5iGMC1oUmxB0uSuHpz
 h9lPDjjj6RSLpzp1jCqswSHsQi00sLSKMtytjEt83/EWPcyN2oiPP1BTq+9jITYR
 SvoKF6R+CLwQscb/DEXb/vRSehg5aivXHg1AOo0l6/OiPQmNdmSZEU4/McPoB2xW
 1MC5Y4wV1g==
 =f6DS
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-2019-08-17' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
 "A collection of fixes that should go into this series. This contains:

   - Revert of the REQ_NOWAIT_INLINE and associated dio changes. There
     were still corner cases there, and even though I had a solution for
     it, it's too involved for this stage. (me)

   - Set of NVMe fixes (via Sagi)

   - io_uring fix for fixed buffers (Anthony)

   - io_uring defer issue fix (Jackie)

   - Regression fix for queue sync at exit time (zhengbin)

   - xen blk-back memory leak fix (Wenwen)"

* tag 'for-linus-2019-08-17' of git://git.kernel.dk/linux-block:
  io_uring: fix an issue when IOSQE_IO_LINK is inserted into defer list
  block: remove REQ_NOWAIT_INLINE
  io_uring: fix manual setup of iov_iter for fixed buffers
  xen/blkback: fix memory leaks
  blk-mq: move cancel of requeue_work to the front of blk_exit_queue
  nvme-pci: Fix async probe remove race
  nvme: fix controller removal race with scan work
  nvme-rdma: fix possible use-after-free in connect error flow
  nvme: fix a possible deadlock when passthru commands sent to a multipath device
  nvme-core: Fix extra device_put() call on error path
  nvmet-file: fix nvmet_file_flush() always returning an error
  nvmet-loop: Flush nvme_delete_wq when removing the port
  nvmet: Fix use-after-free bug when a port is removed
  nvme-multipath: revalidate nvme_ns_head gendisk in nvme_validate_ns
2019-08-17 19:39:54 -07:00
Rafael J. Wysocki 4eaefe8c62 nvme-pci: Allow PCI bus-level PM to be used if ASPM is disabled
One of the modifications made by commit d916b1be94 ("nvme-pci: use
host managed power state for suspend") was adding a pci_save_state()
call to nvme_suspend() so as to instruct the PCI bus type to leave
devices handled by the nvme driver in D0 during suspend-to-idle.
That was done with the assumption that ASPM would transition the
device's PCIe link into a low-power state when the device became
inactive.  However, if ASPM is disabled for the device, its PCIe
link will stay in L0 and in that case commit d916b1be94 is likely
to cause the energy used by the system while suspended to increase.

Namely, if the device in question works in accordance with the PCIe
specification, putting it into D3hot causes its PCIe link to go to
L1 or L2/L3 Ready, which is lower-power than L0.  Since the energy
used by the system while suspended depends on the state of its PCIe
link (as a general rule, the lower-power the state of the link, the
less energy the system will use), putting the device into D3hot
during suspend-to-idle should be more energy-efficient that leaving
it in D0 with disabled ASPM.

For this reason, avoid leaving NVMe devices with disabled ASPM in D0
during suspend-to-idle.  Instead, shut them down entirely and let
the PCI bus type put them into D3.

Fixes: d916b1be94 ("nvme-pci: use host managed power state for suspend")
Link: https://lore.kernel.org/linux-pm/2763495.NmdaWeg79L@kreacher/T/#t
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
2019-08-12 10:47:55 +02:00
Keith Busch bd46a90634 nvme-pci: Fix async probe remove race
Ensure the controller is not in the NEW state when nvme_probe() exits.
This will always allow a subsequent nvme_remove() to set the state to
DELETING, fixing a potential race between the initial asynchronous probe
and device removal.

Reported-by: Li Zhong <lizhongfs@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-07-31 18:03:36 -07:00
Sagi Grimberg 0157ec8dad nvme: fix controller removal race with scan work
With multipath enabled, nvme_scan_work() can read from the device
(through nvme_mpath_add_disk()) and hang [1]. However, with fabrics,
once ctrl->state is set to NVME_CTRL_DELETING, the reads will hang
(see nvmf_check_ready()) and the mpath stack device make_request
will block if head->list is not empty. However, when the head->list
consistst of only DELETING/DEAD controllers, we should actually not
block, but rather fail immediately.

In addition, before we go ahead and remove the namespaces, make sure
to clear the current path and kick the requeue list so that the
request will fast fail upon requeuing.

[1]:
--
  INFO: task kworker/u4:3:166 blocked for more than 120 seconds.
        Not tainted 5.2.0-rc6-vmlocalyes-00005-g808c8c2dc0cf #316
  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  kworker/u4:3    D    0   166      2 0x80004000
  Workqueue: nvme-wq nvme_scan_work
  Call Trace:
   __schedule+0x851/0x1400
   schedule+0x99/0x210
   io_schedule+0x21/0x70
   do_read_cache_page+0xa57/0x1330
   read_cache_page+0x4a/0x70
   read_dev_sector+0xbf/0x380
   amiga_partition+0xc4/0x1230
   check_partition+0x30f/0x630
   rescan_partitions+0x19a/0x980
   __blkdev_get+0x85a/0x12f0
   blkdev_get+0x2a5/0x790
   __device_add_disk+0xe25/0x1250
   device_add_disk+0x13/0x20
   nvme_mpath_set_live+0x172/0x2b0
   nvme_update_ns_ana_state+0x130/0x180
   nvme_set_ns_ana_state+0x9a/0xb0
   nvme_parse_ana_log+0x1c3/0x4a0
   nvme_mpath_add_disk+0x157/0x290
   nvme_validate_ns+0x1017/0x1bd0
   nvme_scan_work+0x44d/0x6a0
   process_one_work+0x7d7/0x1240
   worker_thread+0x8e/0xff0
   kthread+0x2c3/0x3b0
   ret_from_fork+0x35/0x40

   INFO: task kworker/u4:1:1034 blocked for more than 120 seconds.
        Not tainted 5.2.0-rc6-vmlocalyes-00005-g808c8c2dc0cf #316
  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  kworker/u4:1    D    0  1034      2 0x80004000
  Workqueue: nvme-delete-wq nvme_delete_ctrl_work
  Call Trace:
   __schedule+0x851/0x1400
   schedule+0x99/0x210
   schedule_timeout+0x390/0x830
   wait_for_completion+0x1a7/0x310
   __flush_work+0x241/0x5d0
   flush_work+0x10/0x20
   nvme_remove_namespaces+0x85/0x3d0
   nvme_do_delete_ctrl+0xb4/0x1e0
   nvme_delete_ctrl_work+0x15/0x20
   process_one_work+0x7d7/0x1240
   worker_thread+0x8e/0xff0
   kthread+0x2c3/0x3b0
   ret_from_fork+0x35/0x40
--

Reported-by: Logan Gunthorpe <logang@deltatee.com>
Tested-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-07-31 18:01:56 -07:00
Sagi Grimberg d94211b8ba nvme-rdma: fix possible use-after-free in connect error flow
When start_queue fails, we need to make sure to drain the
queue cq before freeing the rdma resources because we might
still race with the completion path. Have start_queue() error
path safely stop the queue.

--
[30371.808111] nvme nvme1: Failed reconnect attempt 11
[30371.808113] nvme nvme1: Reconnecting in 10 seconds...
[...]
[30382.069315] nvme nvme1: creating 4 I/O queues.
[30382.257058] nvme nvme1: Connect Invalid SQE Parameter, qid 4
[30382.257061] nvme nvme1: failed to connect queue: 4 ret=386
[30382.305001] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
[30382.305022] IP: qedr_poll_cq+0x8a3/0x1170 [qedr]
[30382.305028] PGD 0 P4D 0
[30382.305037] Oops: 0000 [#1] SMP PTI
[...]
[30382.305153] Call Trace:
[30382.305166]  ? __switch_to_asm+0x34/0x70
[30382.305187]  __ib_process_cq+0x56/0xd0 [ib_core]
[30382.305201]  ib_poll_handler+0x26/0x70 [ib_core]
[30382.305213]  irq_poll_softirq+0x88/0x110
[30382.305223]  ? sort_range+0x20/0x20
[30382.305232]  __do_softirq+0xde/0x2c6
[30382.305241]  ? sort_range+0x20/0x20
[30382.305249]  run_ksoftirqd+0x1c/0x60
[30382.305258]  smpboot_thread_fn+0xef/0x160
[30382.305265]  kthread+0x113/0x130
[30382.305273]  ? kthread_create_worker_on_cpu+0x50/0x50
[30382.305281]  ret_from_fork+0x35/0x40
--

Reported-by: Nicolas Morey-Chaisemartin <NMoreyChaisemartin@suse.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-07-31 18:00:07 -07:00
Sagi Grimberg b9156daeb1 nvme: fix a possible deadlock when passthru commands sent to a multipath device
When the user issues a command with side effects, we will end up freezing
the namespace request queue when updating disk info (and the same for
the corresponding mpath disk node).

However, we are not freezing the mpath node request queue,
which means that mpath I/O can still come in and block on blk_queue_enter
(called from nvme_ns_head_make_request -> direct_make_request).

This is a deadlock, because blk_queue_enter will block until the inner
namespace request queue is unfroze, but that process is blocked because
the namespace revalidation is trying to update the mpath disk info
and freeze its request queue (which will never complete because
of the I/O that is blocked on blk_queue_enter).

Fix this by freezing all the subsystem nsheads request queues before
executing the passthru command. Given that these commands are infrequent
we should not worry about this temporary I/O freeze to keep things sane.

Here is the matching hang traces:
--
[ 374.465002] INFO: task systemd-udevd:17994 blocked for more than 122 seconds.
[ 374.472975] Not tainted 5.2.0-rc3-mpdebug+ #42
[ 374.478522] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 374.487274] systemd-udevd D 0 17994 1 0x00000000
[ 374.493407] Call Trace:
[ 374.496145] __schedule+0x2ef/0x620
[ 374.500047] schedule+0x38/0xa0
[ 374.503569] blk_queue_enter+0x139/0x220
[ 374.507959] ? remove_wait_queue+0x60/0x60
[ 374.512540] direct_make_request+0x60/0x130
[ 374.517219] nvme_ns_head_make_request+0x11d/0x420 [nvme_core]
[ 374.523740] ? generic_make_request_checks+0x307/0x6f0
[ 374.529484] generic_make_request+0x10d/0x2e0
[ 374.534356] submit_bio+0x75/0x140
[ 374.538163] ? guard_bio_eod+0x32/0xe0
[ 374.542361] submit_bh_wbc+0x171/0x1b0
[ 374.546553] block_read_full_page+0x1ed/0x330
[ 374.551426] ? check_disk_change+0x70/0x70
[ 374.556008] ? scan_shadow_nodes+0x30/0x30
[ 374.560588] blkdev_readpage+0x18/0x20
[ 374.564783] do_read_cache_page+0x301/0x860
[ 374.569463] ? blkdev_writepages+0x10/0x10
[ 374.574037] ? prep_new_page+0x88/0x130
[ 374.578329] ? get_page_from_freelist+0xa2f/0x1280
[ 374.583688] ? __alloc_pages_nodemask+0x179/0x320
[ 374.588947] read_cache_page+0x12/0x20
[ 374.593142] read_dev_sector+0x2d/0xd0
[ 374.597337] read_lba+0x104/0x1f0
[ 374.601046] find_valid_gpt+0xfa/0x720
[ 374.605243] ? string_nocheck+0x58/0x70
[ 374.609534] ? find_valid_gpt+0x720/0x720
[ 374.614016] efi_partition+0x89/0x430
[ 374.618113] ? string+0x48/0x60
[ 374.621632] ? snprintf+0x49/0x70
[ 374.625339] ? find_valid_gpt+0x720/0x720
[ 374.629828] check_partition+0x116/0x210
[ 374.634214] rescan_partitions+0xb6/0x360
[ 374.638699] __blkdev_reread_part+0x64/0x70
[ 374.643377] blkdev_reread_part+0x23/0x40
[ 374.647860] blkdev_ioctl+0x48c/0x990
[ 374.651956] block_ioctl+0x41/0x50
[ 374.655766] do_vfs_ioctl+0xa7/0x600
[ 374.659766] ? locks_lock_inode_wait+0xb1/0x150
[ 374.664832] ksys_ioctl+0x67/0x90
[ 374.668539] __x64_sys_ioctl+0x1a/0x20
[ 374.672732] do_syscall_64+0x5a/0x1c0
[ 374.676828] entry_SYSCALL_64_after_hwframe+0x44/0xa9

[ 374.738474] INFO: task nvmeadm:49141 blocked for more than 123 seconds.
[ 374.745871] Not tainted 5.2.0-rc3-mpdebug+ #42
[ 374.751419] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 374.760170] nvmeadm D 0 49141 36333 0x00004080
[ 374.766301] Call Trace:
[ 374.769038] __schedule+0x2ef/0x620
[ 374.772939] schedule+0x38/0xa0
[ 374.776452] blk_mq_freeze_queue_wait+0x59/0x100
[ 374.781614] ? remove_wait_queue+0x60/0x60
[ 374.786192] blk_mq_freeze_queue+0x1a/0x20
[ 374.790773] nvme_update_disk_info.isra.57+0x5f/0x350 [nvme_core]
[ 374.797582] ? nvme_identify_ns.isra.50+0x71/0xc0 [nvme_core]
[ 374.804006] __nvme_revalidate_disk+0xe5/0x110 [nvme_core]
[ 374.810139] nvme_revalidate_disk+0xa6/0x120 [nvme_core]
[ 374.816078] ? nvme_submit_user_cmd+0x11e/0x320 [nvme_core]
[ 374.822299] nvme_user_cmd+0x264/0x370 [nvme_core]
[ 374.827661] nvme_dev_ioctl+0x112/0x1d0 [nvme_core]
[ 374.833114] do_vfs_ioctl+0xa7/0x600
[ 374.837117] ? __audit_syscall_entry+0xdd/0x130
[ 374.842184] ksys_ioctl+0x67/0x90
[ 374.845891] __x64_sys_ioctl+0x1a/0x20
[ 374.850082] do_syscall_64+0x5a/0x1c0
[ 374.854178] entry_SYSCALL_64_after_hwframe+0x44/0xa9
--

Reported-by: James Puthukattukaran <james.puthukattukaran@oracle.com>
Tested-by: James Puthukattukaran <james.puthukattukaran@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-07-31 17:59:01 -07:00
Logan Gunthorpe 8c36e66fb4 nvme-core: Fix extra device_put() call on error path
In the error path for nvme_init_subsystem(), nvme_put_subsystem()
will call device_put(), but it will get called again after the
mutex_unlock().

The device_put() only needs to be called if device_add() fails.

This bug caused a KASAN use-after-free error when adding and
removing subsytems in a loop:

  BUG: KASAN: use-after-free in device_del+0x8d9/0x9a0
  Read of size 8 at addr ffff8883cdaf7120 by task multipathd/329

  CPU: 0 PID: 329 Comm: multipathd Not tainted 5.2.0-rc6-vmlocalyes-00019-g70a2b39005fd-dirty #314
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
  Call Trace:
   dump_stack+0x7b/0xb5
   print_address_description+0x6f/0x280
   ? device_del+0x8d9/0x9a0
   __kasan_report+0x148/0x199
   ? device_del+0x8d9/0x9a0
   ? class_release+0x100/0x130
   ? device_del+0x8d9/0x9a0
   kasan_report+0x12/0x20
   __asan_report_load8_noabort+0x14/0x20
   device_del+0x8d9/0x9a0
   ? device_platform_notify+0x70/0x70
   nvme_destroy_subsystem+0xf9/0x150
   nvme_free_ctrl+0x280/0x3a0
   device_release+0x72/0x1d0
   kobject_put+0x144/0x410
   put_device+0x13/0x20
   nvme_free_ns+0xc4/0x100
   nvme_release+0xb3/0xe0
   __blkdev_put+0x549/0x6e0
   ? kasan_check_write+0x14/0x20
   ? bd_set_size+0xb0/0xb0
   ? kasan_check_write+0x14/0x20
   ? mutex_lock+0x8f/0xe0
   ? __mutex_lock_slowpath+0x20/0x20
   ? locks_remove_file+0x239/0x370
   blkdev_put+0x72/0x2c0
   blkdev_close+0x8d/0xd0
   __fput+0x256/0x770
   ? _raw_read_lock_irq+0x40/0x40
   ____fput+0xe/0x10
   task_work_run+0x10c/0x180
   ? filp_close+0xf7/0x140
   exit_to_usermode_loop+0x151/0x170
   do_syscall_64+0x240/0x2e0
   ? prepare_exit_to_usermode+0xd5/0x190
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f5a79af05d7
  Code: 00 00 0f 05 48 3d 00 f0 ff ff 77 3f c3 66 0f 1f 44 00 00 53 89 fb 48 83 ec 10 e8 c4 fb ff ff 89 df 89 c2 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 2b 89 d7 89 44 24 0c e8 06 fc ff ff 8b 44 24
  RSP: 002b:00007f5a7799c810 EFLAGS: 00000293 ORIG_RAX: 0000000000000003
  RAX: 0000000000000000 RBX: 0000000000000008 RCX: 00007f5a79af05d7
  RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000008
  RBP: 00007f5a58000f98 R08: 0000000000000002 R09: 00007f5a7935ee80
  R10: 0000000000000000 R11: 0000000000000293 R12: 000055e432447240
  R13: 0000000000000000 R14: 0000000000000001 R15: 000055e4324a9cf0

  Allocated by task 1236:
   save_stack+0x21/0x80
   __kasan_kmalloc.constprop.6+0xab/0xe0
   kasan_kmalloc+0x9/0x10
   kmem_cache_alloc_trace+0x102/0x210
   nvme_init_identify+0x13c3/0x3820
   nvme_loop_configure_admin_queue+0x4fa/0x5e0
   nvme_loop_create_ctrl+0x469/0xf40
   nvmf_dev_write+0x19a3/0x21ab
   __vfs_write+0x66/0x120
   vfs_write+0x154/0x490
   ksys_write+0x104/0x240
   __x64_sys_write+0x73/0xb0
   do_syscall_64+0xa5/0x2e0
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

  Freed by task 329:
   save_stack+0x21/0x80
   __kasan_slab_free+0x129/0x190
   kasan_slab_free+0xe/0x10
   kfree+0xa7/0x200
   nvme_release_subsystem+0x49/0x60
   device_release+0x72/0x1d0
   kobject_put+0x144/0x410
   put_device+0x13/0x20
   klist_class_dev_put+0x31/0x40
   klist_put+0x8f/0xf0
   klist_del+0xe/0x10
   device_del+0x3a7/0x9a0
   nvme_destroy_subsystem+0xf9/0x150
   nvme_free_ctrl+0x280/0x3a0
   device_release+0x72/0x1d0
   kobject_put+0x144/0x410
   put_device+0x13/0x20
   nvme_free_ns+0xc4/0x100
   nvme_release+0xb3/0xe0
   __blkdev_put+0x549/0x6e0
   blkdev_put+0x72/0x2c0
   blkdev_close+0x8d/0xd0
   __fput+0x256/0x770
   ____fput+0xe/0x10
   task_work_run+0x10c/0x180
   exit_to_usermode_loop+0x151/0x170
   do_syscall_64+0x240/0x2e0
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 32fd90c407 ("nvme: change locking for the per-subsystem controller list")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by : Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-07-31 17:57:24 -07:00
Logan Gunthorpe cfc1a1af56 nvmet-file: fix nvmet_file_flush() always returning an error
Presently, nvmet_file_flush() always returns a call to
errno_to_nvme_status() but that helper doesn't take into account the
case when errno=0. So nvmet_file_flush() always returns an error code.

All other callers of errno_to_nvme_status() check for success before
calling it.

To fix this, ensure errno_to_nvme_status() returns success if the
errno is zero. This should prevent future mistakes like this from
happening.

Fixes: c6aa3542e0 ("nvmet: add error log support for file backend")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-07-31 17:57:21 -07:00
Logan Gunthorpe 86b9a63e59 nvmet-loop: Flush nvme_delete_wq when removing the port
After calling nvme_loop_delete_ctrl(), the controllers will not
yet be deleted because nvme_delete_ctrl() only schedules work
to do the delete.

This means a race can occur if a port is removed but there
are still active controllers trying to access that memory.

To fix this, flush the nvme_delete_wq before returning from
nvme_loop_remove_port() so that any controllers that might
be in the process of being deleted won't access a freed port.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by : Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-07-31 17:57:17 -07:00
Logan Gunthorpe 3aed86731e nvmet: Fix use-after-free bug when a port is removed
When a port is removed through configfs, any connected controllers
are still active and can still send commands. This causes a
use-after-free bug which is detected by KASAN for any admin command
that dereferences req->port (like in nvmet_execute_identify_ctrl).

To fix this, disconnect all active controllers when a subsystem is
removed from a port. This ensures there are no active controllers
when the port is eventually removed.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by : Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2019-07-31 17:57:06 -07:00
Anthony Iliopoulos fab7772bfb nvme-multipath: revalidate nvme_ns_head gendisk in nvme_validate_ns
When CONFIG_NVME_MULTIPATH is set, only the hidden gendisk associated
with the per-controller ns is run through revalidate_disk when a
rescan is triggered, while the visible blockdev never gets its size
(bdev->bd_inode->i_size) updated to reflect any capacity changes that
may have occurred.

This prevents online resizing of nvme block devices and in extension of
any filesystems atop that will are unable to expand while mounted, as
userspace relies on the blockdev size for obtaining the disk capacity
(via BLKGETSIZE/64 ioctls).

Fix this by explicitly revalidating the actual namespace gendisk in
addition to the per-controller gendisk, when multipath is enabled.

Signed-off-by: Anthony Iliopoulos <ailiopoulos@suse.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-30 13:29:20 +03:00
yangerkun 8fe34be14e Revert "nvme-pci: don't create a read hctx mapping without read queues"
This reverts commit 0298d54352.

With this patch, set 'poll_queues > hard queues' will lead to 'nr_read_queues = 0'
in nvme_calc_irq_sets. Then poll_queues setting can fail since dev->tagset.nr_maps
equals to 2 and nvme_pci_map_queues will not do map for poll queues.

Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-23 17:47:02 +02:00
Marta Rybczynska 66b20ac0a1 nvme: fix multipath crash when ANA is deactivated
Fix a crash with multipath activated. It happends when ANA log
page is larger than MDTS and because of that ANA is disabled.
The driver then tries to access unallocated buffer when connecting
to a nvme target. The signature is as follows:

[  300.433586] nvme nvme0: ANA log page size (8208) larger than MDTS (8192).
[  300.435387] nvme nvme0: disabling ANA support.
[  300.437835] nvme nvme0: creating 4 I/O queues.
[  300.459132] nvme nvme0: new ctrl: NQN "nqn.0.0.0", addr 10.91.0.1:8009
[  300.464609] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[  300.466342] #PF error: [normal kernel read fault]
[  300.467385] PGD 0 P4D 0
[  300.467987] Oops: 0000 [#1] SMP PTI
[  300.468787] CPU: 3 PID: 50 Comm: kworker/u8:1 Not tainted 5.0.20kalray+ #4
[  300.470264] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[  300.471532] Workqueue: nvme-wq nvme_scan_work [nvme_core]
[  300.472724] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core]
[  300.474038] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48
[  300.477374] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296
[  300.478334] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000
[  300.479784] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258
[  300.481488] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044
[  300.483203] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0
[  300.484928] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0
[  300.486626] FS:  0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000
[  300.488538] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  300.489907] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0
[  300.491612] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  300.493303] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  300.494991] Call Trace:
[  300.495645]  nvme_mpath_add_disk+0x5c/0xb0 [nvme_core]
[  300.496880]  nvme_validate_ns+0x2ef/0x550 [nvme_core]
[  300.498105]  ? nvme_identify_ctrl.isra.45+0x6a/0xb0 [nvme_core]
[  300.499539]  nvme_scan_work+0x2b4/0x370 [nvme_core]
[  300.500717]  ? __switch_to_asm+0x35/0x70
[  300.501663]  process_one_work+0x171/0x380
[  300.502340]  worker_thread+0x49/0x3f0
[  300.503079]  kthread+0xf8/0x130
[  300.503795]  ? max_active_store+0x80/0x80
[  300.504690]  ? kthread_bind+0x10/0x10
[  300.505502]  ret_from_fork+0x35/0x40
[  300.506280] Modules linked in: nvme_tcp nvme_rdma rdma_cm iw_cm ib_cm ib_core nvme_fabrics nvme_core xt_physdev ip6table_raw ip6table_mangle ip6table_filter ip6_tables xt_comment iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_CHECKSUM iptable_mangle iptable_filter veth ebtable_filter ebtable_nat ebtables iptable_raw vxlan ip6_udp_tunnel udp_tunnel sunrpc joydev pcspkr virtio_balloon br_netfilter bridge stp llc ip_tables xfs libcrc32c ata_generic pata_acpi virtio_net virtio_console net_failover virtio_blk failover ata_piix serio_raw libata virtio_pci virtio_ring virtio
[  300.514984] CR2: 0000000000000008
[  300.515569] ---[ end trace faa2eefad7e7f218 ]---
[  300.516354] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core]
[  300.517330] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48
[  300.520353] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296
[  300.521229] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000
[  300.522399] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258
[  300.523560] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044
[  300.524734] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0
[  300.525915] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0
[  300.527084] FS:  0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000
[  300.528396] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  300.529440] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0
[  300.530739] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  300.531989] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  300.533264] Kernel panic - not syncing: Fatal exception
[  300.534338] Kernel Offset: 0x17c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[  300.536227] ---[ end Kernel panic - not syncing: Fatal exception ]---

Condition check refactoring from Christoph Hellwig.

Signed-off-by: Marta Rybczynska <marta.rybczynska@kalray.eu>
Tested-by: Jean-Baptiste Riaux <jbriaux@kalray.eu>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-23 17:46:57 +02:00
Logan Gunthorpe e654dfd38c nvme: fix memory leak caused by incorrect subsystem free
When freeing the subsystem after finding another match with
__nvme_find_get_subsystem(), use put_device() instead of
__nvme_release_subsystem() which calls kfree() directly.

Per the documentation, put_device() should always be used
after device_initialization() is called. Otherwise, leaks
like the one below which was detected by kmemleak may occur.

Once the call of __nvme_release_subsystem() is removed it no
longer makes sense to keep the helper, so fold it back
into nvme_release_subsystem().

unreferenced object 0xffff8883d12bfbc0 (size 16):
  comm "nvme", pid 2635, jiffies 4294933602 (age 739.952s)
  hex dump (first 16 bytes):
    6e 76 6d 65 2d 73 75 62 73 79 73 32 00 88 ff ff  nvme-subsys2....
  backtrace:
    [<000000007d8fc208>] __kmalloc_track_caller+0x16d/0x2a0
    [<0000000081169e5f>] kvasprintf+0xad/0x130
    [<0000000025626f25>] kvasprintf_const+0x47/0x120
    [<00000000fa66ad36>] kobject_set_name_vargs+0x44/0x120
    [<000000004881f8b3>] dev_set_name+0x98/0xc0
    [<000000007124dae3>] nvme_init_identify+0x1995/0x38e0
    [<000000009315020a>] nvme_loop_configure_admin_queue+0x4fa/0x5e0
    [<000000001a63e766>] nvme_loop_create_ctrl+0x489/0xf80
    [<00000000a46ecc23>] nvmf_dev_write+0x1a12/0x2220
    [<000000002259b3d5>] __vfs_write+0x66/0x120
    [<000000002f6df81e>] vfs_write+0x154/0x490
    [<000000007e8cfc19>] ksys_write+0x10a/0x240
    [<00000000ff5c7b85>] __x64_sys_write+0x73/0xb0
    [<00000000fee6d692>] do_syscall_64+0xaa/0x470
    [<00000000997e1ede>] entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: ab9e00cc72 ("nvme: track subsystems")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-23 17:46:43 +02:00
Misha Nasledov 08b903b5fd nvme: ignore subnqn for ADATA SX6000LNP
The ADATA SX6000LNP NVMe SSDs have the same subnqn and, due to this, a
system with more than one of these SSDs will only have one usable.

[ 0.942706] nvme nvme1: ignoring ctrl due to duplicate subnqn (nqn.2018-05.com.example:nvme:nvm-subsystem-OUI00E04C).
[ 0.943017] nvme nvme1: Removing after probe failure status: -22

02:00.0 Non-Volatile memory controller [0108]: Realtek Semiconductor Co., Ltd. Device [10ec:5762] (rev 01)
71:00.0 Non-Volatile memory controller [0108]: Realtek Semiconductor Co., Ltd. Device [10ec:5762] (rev 01)

There are no firmware updates available from the vendor, unfortunately.
Applying the NVME_QUIRK_IGNORE_DEV_SUBNQN quirk for these SSDs resolves
the issue, and they all work after this patch:

/dev/nvme0n1     2J1120050420         ADATA SX6000LNP [...]
/dev/nvme1n1     2J1120050540         ADATA SX6000LNP [...]

Signed-off-by: Misha Nasledov <misha@nasledov.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-23 17:46:43 +02:00
Linus Torvalds 9637d51734 for-linus-20190715
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl0s1ZEQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpiCEEACE9H/pXoegTTWIVPVajMlsa19UHIeilk4N
 GI7oKSiirQEMZnAOmrEzgB4/0zyYQsVypys0gZlYUD3GJVsXDT3zzjNXL5NpVg/O
 nqwSGWMHBSjWkLbaM40Pb2QLXsYgveptNL+9PtxrgtoYPoT5/+TyrJMFrRfi72EK
 WFeNDKOu6aJxpJ26JSsckJ0gluKeeEpRoEqsgHGIwaMIGHQf+b+ikk7tel5FAIgA
 uDwwD+Oxsdgh/ChsXL0d90GkcbcSp6GQ7GybxVmw/tPijx6mpeIY72xY3Zx+t8zF
 b71UNk6NmCKjOPO/6fiuYKKTYw+KhzlyEKO0j675HKfx2AhchEwKw0irp4yUlydA
 zxWYmz4U7iRgktJtymv3J4FEQQ3S6d1EnuQkQNX1LwiOsEsfzhkWi+7jy7KFhZoJ
 AqtYzqnOXvLx92q0vloj06HtK6zo+I/MINldy0+qn9lq0N0VF+dctyztAHLsF7P6
 pUtS6i7l1JSFKAmMhC31sIj5TImaehM2e/TWMUPEDZaO96oKCmQwOF1oiloc6vlW
 h4xWsxP/9zOFcWNyPzy6Vo3JUXWRvFA7K+jV3Hsukw6rVHiNCGVYGSlTv8Roi5b7
 I4ggu9R2JOGyku7UIlL50IRxEyjAp11LaO8yHhcCnRB65rmyBuNMQNcfOsfxpZ5Y
 1mtSNhm5TQ==
 =g8xI
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20190715' of git://git.kernel.dk/linux-block

Pull more block updates from Jens Axboe:
 "A later pull request with some followup items. I had some vacation
  coming up to the merge window, so certain things items were delayed a
  bit. This pull request also contains fixes that came in within the
  last few days of the merge window, which I didn't want to push right
  before sending you a pull request.

  This contains:

   - NVMe pull request, mostly fixes, but also a few minor items on the
     feature side that were timing constrained (Christoph et al)

   - Report zones fixes (Damien)

   - Removal of dead code (Damien)

   - Turn on cgroup psi memstall (Josef)

   - block cgroup MAINTAINERS entry (Konstantin)

   - Flush init fix (Josef)

   - blk-throttle low iops timing fix (Konstantin)

   - nbd resize fixes (Mike)

   - nbd 0 blocksize crash fix (Xiubo)

   - block integrity error leak fix (Wenwen)

   - blk-cgroup writeback and priority inheritance fixes (Tejun)"

* tag 'for-linus-20190715' of git://git.kernel.dk/linux-block: (42 commits)
  MAINTAINERS: add entry for block io cgroup
  null_blk: fixup ->report_zones() for !CONFIG_BLK_DEV_ZONED
  block: Limit zone array allocation size
  sd_zbc: Fix report zones buffer allocation
  block: Kill gfp_t argument of blkdev_report_zones()
  block: Allow mapping of vmalloc-ed buffers
  block/bio-integrity: fix a memory leak bug
  nvme: fix NULL deref for fabrics options
  nbd: add netlink reconfigure resize support
  nbd: fix crash when the blksize is zero
  block: Disable write plugging for zoned block devices
  block: Fix elevator name declaration
  block: Remove unused definitions
  nvme: fix regression upon hot device removal and insertion
  blk-throttle: fix zero wait time for iops throttled group
  block: Fix potential overflow in blk_report_zones()
  blkcg: implement REQ_CGROUP_PUNT
  blkcg, writeback: Implement wbc_blkcg_css()
  blkcg, writeback: Add wbc->no_cgroup_owner
  blkcg, writeback: Rename wbc_account_io() to wbc_account_cgroup_owner()
  ...
2019-07-15 21:20:52 -07:00
Linus Torvalds 2a3c389a0f 5.3 Merge window RDMA pull request
A smaller cycle this time. Notably we see another new driver, 'Soft
 iWarp', and the deletion of an ancient unused driver for nes.
 
 - Revise and simplify the signature offload RDMA MR APIs
 
 - More progress on hoisting object allocation boiler plate code out of the
   drivers
 
 - Driver bug fixes and revisions for hns, hfi1, efa, cxgb4, qib, i40iw
 
 - Tree wide cleanups: struct_size, put_user_page, xarray, rst doc conversion
 
 - Removal of obsolete ib_ucm chardev and nes driver
 
 - netlink based discovery of chardevs and autoloading of the modules
   providing them
 
 - Move more of the rdamvt/hfi1 uapi to include/uapi/rdma
 
 - New driver 'siw' for software based iWarp running on top of netdev,
   much like rxe's software RoCE.
 
 - mlx5 feature to report events in their raw devx format to userspace
 
 - Expose per-object counters through rdma tool
 
 - Adaptive interrupt moderation for RDMA (DIM), sharing the DIM core
   from netdev
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAl0ozSwACgkQOG33FX4g
 mxqncg//Qe2zSnlbd6r3hofsc1WiHSx/CiXtT52BUGipO+cWQUwO7hGFuUHIFCuZ
 JBg7mc998xkyLIH85a/txd+RwAIApKgHVdd+VlrmybZeYCiERAMFpWg8cHpzrbnw
 l3Ln9fTtJf/NAhO0ZCGV9DCd01fs9yVQgAv21UnLJMUhp9Pzk/iMhu7C7IiSLKvz
 t7iFhEqPXNJdoqZ+wtWyc/463YxKUd9XNg9Z1neQdaeZrX4UjgDbY9x/ub3zOvQV
 jc/IL4GysJ3z8mfx5mAd6sE/jAjhcnJuaGYYATqkxiLZEP+muYwU50CNs951XhJC
 b/EfRQIcLg9kq/u6CP+CuWlMrRWy3U7yj3/mrbbGhlGq88Yt6FGqUf0aFy6TYMaO
 RzTG5ZR+0AmsOrR1QU+DbH9CKX5PGZko6E7UCdjROqUlAUOjNwRr99O5mYrZoM9E
 PdN2vtdWY9COR3Q+7APdhWIA/MdN2vjr3LDsR3H94tru1yi6dB/BPDRcJieozaxn
 2T+YrZbV+9/YgrccpPQCilaQdanXKpkmbYkbEzVLPcOEV/lT9odFDt3eK+6duVDL
 ufu8fs1xapMDHKkcwo5jeNZcoSJymAvHmGfZlo2PPOmh802Ul60bvYKwfheVkhHF
 Eee5/ovCMs1NLqFiq7Zq5mXO0fR0BHyg9VVjJBZm2JtazyuhoHQ=
 =iWcG
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull rdma updates from Jason Gunthorpe:
 "A smaller cycle this time. Notably we see another new driver, 'Soft
  iWarp', and the deletion of an ancient unused driver for nes.

   - Revise and simplify the signature offload RDMA MR APIs

   - More progress on hoisting object allocation boiler plate code out
     of the drivers

   - Driver bug fixes and revisions for hns, hfi1, efa, cxgb4, qib,
     i40iw

   - Tree wide cleanups: struct_size, put_user_page, xarray, rst doc
     conversion

   - Removal of obsolete ib_ucm chardev and nes driver

   - netlink based discovery of chardevs and autoloading of the modules
     providing them

   - Move more of the rdamvt/hfi1 uapi to include/uapi/rdma

   - New driver 'siw' for software based iWarp running on top of netdev,
     much like rxe's software RoCE.

   - mlx5 feature to report events in their raw devx format to userspace

   - Expose per-object counters through rdma tool

   - Adaptive interrupt moderation for RDMA (DIM), sharing the DIM core
     from netdev"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (194 commits)
  RMDA/siw: Require a 64 bit arch
  RDMA/siw: Mark expected switch fall-throughs
  RDMA/core: Fix -Wunused-const-variable warnings
  rdma/siw: Remove set but not used variable 's'
  rdma/siw: Add missing dependencies on LIBCRC32C and DMA_VIRT_OPS
  RDMA/siw: Add missing rtnl_lock around access to ifa
  rdma/siw: Use proper enumerated type in map_cqe_status
  RDMA/siw: Remove unnecessary kthread create/destroy printouts
  IB/rdmavt: Fix variable shadowing issue in rvt_create_cq
  RDMA/core: Fix race when resolving IP address
  RDMA/core: Make rdma_counter.h compile stand alone
  IB/core: Work on the caller socket net namespace in nldev_newlink()
  RDMA/rxe: Fill in wc byte_len with IB_WC_RECV_RDMA_WITH_IMM
  RDMA/mlx5: Set RDMA DIM to be enabled by default
  RDMA/nldev: Added configuration of RDMA dynamic interrupt moderation to netlink
  RDMA/core: Provide RDMA DIM support for ULPs
  linux/dim: Implement RDMA adaptive moderation (DIM)
  IB/mlx5: Report correctly tag matching rendezvous capability
  docs: infiniband: add it to the driver-api bookset
  IB/mlx5: Implement VHCA tunnel mechanism in DEVX
  ...
2019-07-15 20:38:15 -07:00
Linus Torvalds 1f7563f743 SCSI sg on 20190709
This topic branch covers a fundamental change in how our sg lists are
 allocated to make mq more efficient by reducing the size of the
 preallocated sg list.  This necessitates a large number of driver
 changes because the previous guarantee that if a driver specified
 SG_ALL as the size of its scatter list, it would get a non-chained
 list and didn't need to bother with scatterlist iterators is now
 broken and every driver *must* use scatterlist iterators.
 
 This was broken out as a separate topic because we need to convert all
 the drivers before pulling the trigger and unconverted drivers kept
 being found, necessitating a rebase.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXSTzzCYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishZB+AP9I8j/s
 wWfg0Z3WNuf4D5I3rH4x1J3cQTqPJed+RjwgcQEA1gZvtOTg1ZEn/CYMVnaB92x0
 t6MZSchIaFXeqfD+E7U=
 =cv8o
 -----END PGP SIGNATURE-----

Merge tag 'scsi-sg' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI scatter-gather list updates from James Bottomley:
 "This topic branch covers a fundamental change in how our sg lists are
  allocated to make mq more efficient by reducing the size of the
  preallocated sg list.

  This necessitates a large number of driver changes because the
  previous guarantee that if a driver specified SG_ALL as the size of
  its scatter list, it would get a non-chained list and didn't need to
  bother with scatterlist iterators is now broken and every driver
  *must* use scatterlist iterators.

  This was broken out as a separate topic because we need to convert all
  the drivers before pulling the trigger and unconverted drivers kept
  being found, necessitating a rebase"

* tag 'scsi-sg' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (21 commits)
  scsi: core: don't preallocate small SGL in case of NO_SG_CHAIN
  scsi: lib/sg_pool.c: clear 'first_chunk' in case of no preallocation
  scsi: core: avoid preallocating big SGL for data
  scsi: core: avoid preallocating big SGL for protection information
  scsi: lib/sg_pool.c: improve APIs for allocating sg pool
  scsi: esp: use sg helper to iterate over scatterlist
  scsi: NCR5380: use sg helper to iterate over scatterlist
  scsi: wd33c93: use sg helper to iterate over scatterlist
  scsi: ppa: use sg helper to iterate over scatterlist
  scsi: pcmcia: nsp_cs: use sg helper to iterate over scatterlist
  scsi: imm: use sg helper to iterate over scatterlist
  scsi: aha152x: use sg helper to iterate over scatterlist
  scsi: s390: zfcp_fc: use sg helper to iterate over scatterlist
  scsi: staging: unisys: visorhba: use sg helper to iterate over scatterlist
  scsi: usb: image: microtek: use sg helper to iterate over scatterlist
  scsi: pmcraid: use sg helper to iterate over scatterlist
  scsi: ipr: use sg helper to iterate over scatterlist
  scsi: mvumi: use sg helper to iterate over scatterlist
  scsi: lpfc: use sg helper to iterate over scatterlist
  scsi: advansys: use sg helper to iterate over scatterlist
  ...
2019-07-11 15:17:41 -07:00
Minwoo Im 7d30c81b80 nvme: fix NULL deref for fabrics options
git://git.infradead.org/nvme.git nvme-5.3 branch now causes the
following NULL deref oops.  Check the ctrl->opts first before the deref.

[   16.337581] BUG: kernel NULL pointer dereference, address: 0000000000000056
[   16.338551] #PF: supervisor read access in kernel mode
[   16.338551] #PF: error_code(0x0000) - not-present page
[   16.338551] PGD 0 P4D 0
[   16.338551] Oops: 0000 [#1] SMP PTI
[   16.338551] CPU: 2 PID: 1035 Comm: kworker/u16:5 Not tainted 5.2.0-rc6+ #1
[   16.338551] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
[   16.338551] Workqueue: nvme-wq nvme_scan_work [nvme_core]
[   16.338551] RIP: 0010:nvme_validate_ns+0xc9/0x7e0 [nvme_core]
[   16.338551] Code: c0 49 89 c5 0f 84 00 07 00 00 48 8b 7b 58 e8 be 48 39 c1 48 3d 00 f0 ff ff 49 89 45 18 0f 87 a4 06 00 00 48 8b 93 70 0a 00 00 <80> 7a 56 00 74 0c 48 8b 40 68 83 48 3c 08 49 8b 45 18 48 89 c6 bf
[   16.338551] RSP: 0018:ffffc900024c7d10 EFLAGS: 00010283
[   16.338551] RAX: ffff888135a30720 RBX: ffff88813a4fd1f8 RCX: 0000000000000007
[   16.338551] RDX: 0000000000000000 RSI: ffffffff8256dd38 RDI: ffff888135a30720
[   16.338551] RBP: 0000000000000001 R08: 0000000000000007 R09: ffff88813aa6a840
[   16.338551] R10: 0000000000000001 R11: 000000000002d060 R12: ffff88813a4fd1f8
[   16.338551] R13: ffff88813a77f800 R14: ffff88813aa35180 R15: 0000000000000001
[   16.338551] FS:  0000000000000000(0000) GS:ffff88813ba80000(0000) knlGS:0000000000000000
[   16.338551] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   16.338551] CR2: 0000000000000056 CR3: 000000000240a002 CR4: 0000000000360ee0
[   16.338551] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   16.338551] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   16.338551] Call Trace:
[   16.338551]  nvme_scan_work+0x2c0/0x340 [nvme_core]
[   16.338551]  ? __switch_to_asm+0x40/0x70
[   16.338551]  ? _raw_spin_unlock_irqrestore+0x18/0x30
[   16.338551]  ? try_to_wake_up+0x408/0x450
[   16.338551]  process_one_work+0x20b/0x3e0
[   16.338551]  worker_thread+0x1f9/0x3d0
[   16.338551]  ? cancel_delayed_work+0xa0/0xa0
[   16.338551]  kthread+0x117/0x120
[   16.338551]  ? kthread_stop+0xf0/0xf0
[   16.338551]  ret_from_fork+0x3a/0x50
[   16.338551] Modules linked in: nvme nvme_core
[   16.338551] CR2: 0000000000000056
[   16.338551] ---[ end trace b9bf761a93e62d84 ]---
[   16.338551] RIP: 0010:nvme_validate_ns+0xc9/0x7e0 [nvme_core]
[   16.338551] Code: c0 49 89 c5 0f 84 00 07 00 00 48 8b 7b 58 e8 be 48 39 c1 48 3d 00 f0 ff ff 49 89 45 18 0f 87 a4 06 00 00 48 8b 93 70 0a 00 00 <80> 7a 56 00 74 0c 48 8b 40 68 83 48 3c 08 49 8b 45 18 48 89 c6 bf
[   16.338551] RSP: 0018:ffffc900024c7d10 EFLAGS: 00010283
[   16.338551] RAX: ffff888135a30720 RBX: ffff88813a4fd1f8 RCX: 0000000000000007
[   16.338551] RDX: 0000000000000000 RSI: ffffffff8256dd38 RDI: ffff888135a30720
[   16.338551] RBP: 0000000000000001 R08: 0000000000000007 R09: ffff88813aa6a840
[   16.338551] R10: 0000000000000001 R11: 000000000002d060 R12: ffff88813a4fd1f8
[   16.338551] R13: ffff88813a77f800 R14: ffff88813aa35180 R15: 0000000000000001
[   16.338551] FS:  0000000000000000(0000) GS:ffff88813ba80000(0000) knlGS:0000000000000000
[   16.338551] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   16.338551] CR2: 0000000000000056 CR3: 000000000240a002 CR4: 0000000000360ee0
[   16.338551] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   16.338551] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Fixes: 958f2a0f81 ("nvme-tcp: set the STABLE_WRITES flag when data digests are enabled")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-11 16:02:26 -06:00
Sagi Grimberg 420dc733f9 nvme: fix regression upon hot device removal and insertion
When we validate the new controller id, we want to skip
controllers that are either deleting or dead. Fix the check
to do that and not on the newly added controller.

Fixes: 1b1031ca63 ("nvme: validate cntlid during controller initialisation")
Reported-by: Jon Derrick <jonathan.derrick@intel.com>
Tested-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-10 09:36:16 -07:00
James Smart 4c73cbdff1 nvme-fc: fix module unloads while lports still pending
Current code allows the module to be unloaded even if there are
pending data structures, such as localports and controllers on
the localports, that have yet to hit their reference counting
to remove them.

Fix by having exit entrypoint explicitly delete every controller,
which in turn will remove references on the remoteports and localports
causing them to be deleted as well. The exit entrypoint, after
initiating the deletes, will wait for the last localport to be deleted
before continuing.

Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-09 14:37:05 -07:00
Mikhail Skorzhinskii 37c1521959 nvme-tcp: don't use sendpage for SLAB pages
According to commit a10674bf24 ("tcp: detecting the misuse of
.sendpage for Slab objects") and previous discussion, tcp_sendpage
should not be used for pages that is managed by SLAB, as SLAB is not
taking page reference counters into consideration.

Signed-off-by: Mikhail Skorzhinskii <mskorzhinskiy@solarflare.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-09 14:18:09 -07:00
Mikhail Skorzhinskii 958f2a0f81 nvme-tcp: set the STABLE_WRITES flag when data digests are enabled
There was a few false alarms sighted on target side about wrong data
digest while performing high throughput load to XFS filesystem shared
through NVMoF TCP.

This flag tells the rest of the kernel to ensure that the data buffer
does not change while the write is in flight.  It incurs a performance
penalty, so only enable it when it is actually needed, i.e. when we are
calculating data digests.

Although even with this change in place, ext2 users can steel experience
false positives, as ext2 is not respecting this flag. This may be apply
to vfat as well.

Signed-off-by: Mikhail Skorzhinskii <mskorzhinskiy@solarflare.com>
Signed-off-by: Mike Playle <mplayle@solarflare.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-09 14:18:09 -07:00
Mikhail Skorzhinskii 5ba895033b nvmet: print a hint while rejecting NSID 0 or 0xffffffff
Adding this hint for the sake of convenience.

It was spotted that a few times people spent some time before
understanding what is exactly wrong in configuration process.  This
should save a few time in such situations, especially for people who
is not very confident with NVMe requirements.

Signed-off-by: Mikhail Skorzhinskii <mskorzhinskiy@solarflare.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-09 14:18:09 -07:00
Hannes Reinecke 04e70bd4a0 nvme-multipath: do not select namespaces which are about to be removed
nvme_ns_remove() will first set the NVME_NS_REMOVING flag before removing
it from the list at the very last step.
So to avoid selecting a namespace in nvme_find_path() which is about to be
removed check the NVME_NS_REMOVING flag, too, when selecting a new path.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-09 14:18:03 -07:00
Hannes Reinecke 2032d07471 nvme-multipath: also check for a disabled path if there is a single sibling
When we have a singular list in nvme_round_robin_path() we still
need to check its validity.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-09 14:17:21 -07:00
Hannes Reinecke ca7ae5c966 nvme-multipath: factor out a nvme_path_is_disabled helper
Factor our a common helper to check if a path has been disabled
by something other than the per-namespace ANA state.

Signed-off-by: Hannes Reinecke <hare@suse.com>
[hch: split from a bigger patch]
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-09 14:16:38 -07:00
Bart Van Assche 81adb86334 nvme: set physical block size and optimal I/O size
>From the NVMe 1.4 spec:

NSFEAT bit 4 if set to 1: indicates that the fields NPWG, NPWA, NPDG, NPDA,
and NOWS are defined for this namespace and should be used by the host for
I/O optimization;
[ ... ]
Namespace Preferred Write Granularity (NPWG): This field indicates the
smallest recommended write granularity in logical blocks for this namespace.
This is a 0's based value. The size indicated should be less than or equal
to Maximum Data Transfer Size (MDTS) that is specified in units of minimum
memory page size. The value of this field may change if the namespace is
reformatted. The size should be a multiple of Namespace Preferred Write
Alignment (NPWA). Refer to section 8.25 for how this field is utilized to
improve performance and endurance.
[ ... ]
Each Write, Write Uncorrectable, or Write Zeroes commands should address a
multiple of Namespace Preferred Write Granularity (NPWG) (refer to Figure
245) and Stream Write Size (SWS) (refer to Figure 515) logical blocks (as
expressed in the NLB field), and the SLBA field of the command should be
aligned to Namespace Preferred Write Alignment (NPWA) (refer to Figure 245)
for best performance.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-09 14:15:37 -07:00
Bart Van Assche 9d05a96e29 nvmet: export I/O characteristics attributes in Identify
Make the NVMe NAWUN, NAWUPF, NACWU, NPWG, NPWA, NPDG and NOWS attributes
available to initator systems for the block backend.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-09 14:15:37 -07:00
Tom Wu 4c0181bf6c nvme-trace: add delete completion and submission queue to admin cmds tracer
The trace log for 'delete I/O submission queue' and 'delete I/O
completion queue' command will look like as below:

kworker/u49:1-3438  [003] ....  6693.070865: nvme_setup_cmd: nvme0: qid=0, cmdid=11, nsid=0, flags=0x0, meta=0x0, cmd=(nvme_admin_delete_sq sqid=1)
kworker/u49:1-3438  [003] ....  6693.071171: nvme_setup_cmd: nvme0: qid=0, cmdid=8, nsid=0, flags=0x0, meta=0x0, cmd=(nvme_admin_delete_cq cqid=24)

Signed-off-by: Tom Wu <tomwu@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-09 14:15:37 -07:00
Colin Ian King 91f6d79853 nvme-trace: fix spelling mistake "spcecific" -> "specific"
There are two spelling mistakes in trace_seq_printf messages, fix these.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-09 13:44:45 -07:00
Christoph Hellwig 7637de311b nvme-pci: limit max_hw_sectors based on the DMA max mapping size
When running a NVMe device that is attached to a addressing
challenged PCIe root port that requires bounce buffering, our
request sizes can easily overflow the swiotlb bounce buffer
size.  Limit the maximum I/O size to the limit exposed by
the DMA mapping subsystem.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Atish Patra <Atish.Patra@wdc.com>
Tested-by: Atish Patra <Atish.Patra@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2019-07-09 13:44:44 -07:00
Alan Mikhak bfac8e9f55 nvme-pci: check for NULL return from pci_alloc_p2pmem()
Modify nvme_alloc_sq_cmds() to call pci_free_p2pmem() to free the memory
it allocated using pci_alloc_p2pmem() in case pci_p2pmem_virt_to_bus()
returns null.

Makes sure not to call pci_free_p2pmem() if pci_alloc_p2pmem() returned
NULL, which can happen if CONFIG_PCI_P2PDMA is not configured.

The current implementation is not expected to leak since
pci_p2pmem_virt_to_bus() is expected to fail only if pci_alloc_p2pmem()
returns null. However, checking the return value of pci_alloc_p2pmem()
is more explicit.

Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-09 13:44:44 -07:00
Alan Mikhak 0298d54352 nvme-pci: don't create a read hctx mapping without read queues
Only request an IRQ mapping for read queues if at least one read queue
is being allocted, as nvme_pci_map_queues() will later on ignore the
unnecessary mapping request should nvme_dev_add() request such an IRQ
mapping even though no read queues are being allocated.  However,
nvme_dev_add() can avoid making the request by checking the number of
read queues without assuming. This would bring it more in line with
nvme_setup_irqs() and nvme_calc_irq_sets().

Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-09 13:44:44 -07:00
Christoph Hellwig 4fe06923f5 nvme-pci: don't fall back to a 32-bit DMA mask
Since Linux 5.0 drivers can safely set the largest DMA mask supported
by the device, and don't need fallbacks to work around the dma mapping
implementations.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2019-07-09 13:44:44 -07:00
YueHaibing 2177422232 nvme-pci: make nvme_dev_pm_ops static
Fix sparse warning:

drivers/nvme/host/pci.c:2926:25: warning:
 symbol 'nvme_dev_pm_ops' was not declared. Should it be static?

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-09 13:16:10 -07:00
James Smart e0620bf858 nvme-fcloop: resolve warnings on RCU usage and sleep warnings
With additional debugging enabled, seeing warnings for suspicious RCU
usage or Sleeping function called from invalid context.

These both map to allocation of a work structure which is currently
GFP_KERNEL, meaning it can sleep. For the RCU warning, the sequence was
sleeping while holding the RCU lock.

Convert the allocation to GFP_ATOMIC.

Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-09 13:16:09 -07:00
James Smart c38dbbfab1 nvme-fcloop: fix inconsistent lock state warnings
With extra debug on, inconsistent lock state warnings are being called
out as the tfcp_req->reqlock is being taken out without irq, while some
calling sequences have the sequence in a softirq state.

Change the lock taking/release to raise/drop irq.

Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-09 13:16:09 -07:00
Jason Gunthorpe 371bb62158 Linux 5.2-rc6
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl0Os1seHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGtx4H/j6i482XzcGFKTBm
 A7mBoQpy+kLtoUov4EtBAR62OuwI8rsahW9di37QKndPoQrczWaKBmr3De6LCdPe
 v3pl3O6wBbvH5ru+qBPFX9PdNbDvimEChh7LHxmMxNQq3M+AjZAZVJyfpoiFnx35
 Fbge+LZaH/k8HMwZmkMr5t9Mpkip715qKg2o9Bua6dkH0AqlcpLlC8d9a+HIVw/z
 aAsyGSU8jRwhoAOJsE9bJf0acQ/pZSqmFp0rDKqeFTSDMsbDRKLGq/dgv4nW0RiW
 s7xqsjb/rdcvirRj3rv9+lcTVkOtEqwk0PVdL9WOf7g4iYrb3SOIZh8ZyViaDSeH
 VTS5zps=
 =huBY
 -----END PGP SIGNATURE-----

Merge tag 'v5.2-rc6' into rdma.git for-next

For dependencies in next patches.

Resolve conflicts:
- Use uverbs_get_cleared_udata() with new cq allocation flow
- Continue to delete nes despite SPDX conflict
- Resolve list appends in mlx5_command_str()
- Use u16 for vport_rule stuff
- Resolve list appends in struct ib_client

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-28 21:18:23 -03:00
Israel Rukshin 5a6781a558 RDMA/core: Add an integrity MR pool support
This is a preparation for adding new signature API to the rw-API.

Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24 11:49:27 -03:00
Akinobu Mita f79d5fda4e nvme: enable to inject errors into admin commands
This enables to inject errors into the commands submitted to the admin
queue.

It is useful to test error handling in the controller initialization.

	# echo 100 > /sys/kernel/debug/nvme0/fault_inject/probability
	# echo 1 > /sys/kernel/debug/nvme0/fault_inject/times
	# echo 10 > /sys/kernel/debug/nvme0/fault_inject/space
	# nvme reset /dev/nvme0
	# dmesg
	...
	nvme nvme0: Could not set queue count (16385)
	nvme nvme0: IO queues not created

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-06-21 11:15:50 +02:00
Akinobu Mita a3646451ed nvme: prepare for fault injection into admin commands
Currenlty fault injection support for nvme only enables to inject errors
into the commands submitted to I/O queues.

In preparation for fault injection into the admin commands, this makes
the helper functions independent of struct nvme_ns.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-06-21 11:15:50 +02:00
Minwoo Im a5448fdc46 nvmet: introduce target-side trace
This patch introduces target-side request tracing.  As Christoph
suggested, the trace would not be in a core or module to avoid
disadvantages like cache miss:
  http://lists.infradead.org/pipermail/linux-nvme/2019-June/024721.html

The target-side trace code is entirely based on the Johannes's trace code
from the host side.  It has lots of codes duplicated, but it would be
better than having advantages mentioned above.

It also traces not only fabrics commands, but also nvme normal commands.
Once the codes to be shared gets bigger, then we can make it common as
suggsted.

This also removed the create_sq and create_cq trace parsing functions
because it will be done by the connect fabrics command.

Example:
  echo 1 > /sys/kernel/debug/tracing/event/nvmet/nvmet_req_init/enable
  echo 1 > /sys/kernel/debug/tracing/event/nvmet/nvmet_req_complete/enable
  cat /sys/kernel/debug/tracing/trace

Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
[hch: fixed the symbol namespace and a an endianess conversion]
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-06-21 11:15:46 +02:00
Minwoo Im 5f965f4fd9 nvme-trace: print result and status in hex format
The "result" field is in 64bit to be printed out which means it could be
like:
  nvme_complete_rq: nvme0: qid=0, cmdid=0, res=18446612684158962624, etries=0, flags=0x0, status=0

Switch both the result and status field to be printed in hexadecimal
format to be easier to read.

Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-06-21 11:12:37 +02:00
Minwoo Im ad795e47cd nvme-trace: support for fabrics commands in host-side
This patch introduces fabrics commands tracing feature from host-side.
This patch does not include any changes for the previous host-side
tracing, but just add fabrics commands parsing in cmd=() format.

Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
[hch: fixed some whitespace damage]
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-06-21 11:12:22 +02:00
Minwoo Im 26f2990d85 nvme-trace: move opcode symbol print to nvme.h
The following patches are going to provide the target-side trace which
might need these kind of macros.  It would be great if it can be shared
between host and target side both.

Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-06-21 11:12:19 +02:00
Minwoo Im 7183a46a48 nvme-trace: do not export nvme_trace_disk_name
nvme_trace_disk_name() is now already being invoked with the function
prototype in trace.h.  We don't need to export this symbol at all.

The following patches are going to provide target-side trace feature
with the exactly same function with this so that this patch removes the
EXPORT_SYMBOL() for this function.

Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-06-21 11:11:56 +02:00