The port close_delay and closing wait parameters set by TIOCSSERIAL are
specified in jiffies, while the values returned by TIOCGSERIAL are
specified in centiseconds.
Add the missing conversions so that TIOCSSERIAL works as expected also
when HZ is not 100.
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407102334.32361-14-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.
A non-privileged user has only ever been able to set the since long
deprecated ASYNC_SPD flags and trying to change any other *supported*
feature should result in -EPERM being returned. Setting the current
values for any supported features should return success.
Fix the moxa implementation which was returning -EPERM also for a
privileged user when trying to change certain unsupported parameters and
instead return success consistently.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407102334.32361-13-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The port close_delay parameter set by TIOCSSERIAL is specified in
jiffies, while the value returned by TIOCGSERIAL is specified in
centiseconds.
Add the missing conversions so that TIOCGSERIAL works as expected also
when HZ is not 100.
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407102334.32361-11-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The tty-port close_delay and closing_wait parameters set by TIOCSSERIAL
are specified in jiffies, while the values returned by TIOCGSERIAL are
specified in centiseconds.
Add the missing conversions so that TIOCSSERIAL works as expected also
if this code is ever reused on a system where HZ is not 100.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407102334.32361-10-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changing the port closing_wait parameter is a privileged operation.
Add the missing check to TIOCSSERIAL so that -EPERM is returned in case
an unprivileged user tries to change the closing-wait setting.
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407102334.32361-9-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.
The xmit_fifo_size parameter could be used to set the hardware transmit
fifo size of a legacy UART when it could not be detected, but the
interface is limited to eight bits and should be left unset when not
used.
Similarly, baud_base could be used to set the UART base clock when it
could not be detected but might as well be left unset when it is not
known.
The type parameter could be used to set the UART type, but is
better left unspecified (type unknown) when it isn't used.
Note that some applications have historically expected TIOCGSERIAL to be
implemented, but judging from the Debian sources, the port type not
being PORT_UNKNOWN is only used to check for the existence of legacy
serial ports (ttySn). Notably USB serial drivers like ftdi_sio have been
using PORT_UNKNOWN for twenty years without any problems.
Drop the bogus values provided by the greybus implementation.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407102334.32361-8-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.
A non-privileged user has only ever been able to set the since long
deprecated ASYNC_SPD flags and trying to change any other *supported*
feature should result in -EPERM being returned. Setting the current
values for any supported features should return success.
Fix the greybus implementation which instead indicated that the
TIOCSSERIAL ioctl was not even implemented when a non-privileged user
set the current values.
Fixes: e68453ed28 ("greybus: uart-gb: now builds, more framework added")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407102334.32361-7-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The port close_delay and closing_wait parameters set by TIOCSSERIAL are
specified in jiffies and not milliseconds.
Add the missing conversions so that TIOCSSERIAL works as expected also
when HZ is not 1000.
Fixes: e68453ed28 ("greybus: uart-gb: now builds, more framework added")
Cc: stable@vger.kernel.org # 4.9
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407102334.32361-6-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.
The xmit_fifo_size parameter could be used to set the hardware transmit
fifo size of a legacy UART when it could not be detected, but the
interface is limited to eight bits and should be left unset when not
used.
Fix the fwserial implementation by dropping its custom interpretation of
the unused xmit_fifo_size field, which was overflowed with the driver
FIFO size. Also leave the type and flags fields unset as these cannot be
changed.
The close_delay and closing_wait parameters returned by TIOCGSERIAL are
specified in centiseconds. The driver does not yet support changing
closing_wait, but let's report back the default value actually used (30
seconds).
Fixes: 7355ba3445 ("staging: fwserial: Add TTY-over-Firewire serial driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407102334.32361-5-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.
A non-privileged user has only ever been able to set the since long
deprecated ASYNC_SPD flags and trying to change any other *supported*
feature should result in -EPERM being returned. Setting the current
values for any supported features should return success.
Fix the fwserial implementation which was returning -EPERM also for a
privileged user when trying to change certain unsupported parameters,
and instead return success consistently.
Fixes: 7355ba3445 ("staging: fwserial: Add TTY-over-Firewire serial driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407102334.32361-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changing the port close-delay parameter is a privileged operation so
make sure to return -EPERM if a regular user tries to change it.
Fixes: 7355ba3445 ("staging: fwserial: Add TTY-over-Firewire serial driver")
Cc: stable@vger.kernel.org # 3.8
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407102334.32361-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The port close_delay parameter set by TIOCSSERIAL is specified in
jiffies, while the value returned by TIOCGSERIAL is specified in
centiseconds.
Add the missing conversions so that TIOCGSERIAL works as expected also
when HZ is not 100.
Fixes: 7355ba3445 ("staging: fwserial: Add TTY-over-Firewire serial driver")
Cc: stable@vger.kernel.org # 3.8
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210407102334.32361-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Guobin Huang <huangguobin4@huawei.com>
Link: https://lore.kernel.org/r/1617710163-48158-1-git-send-email-huangguobin4@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A test was added to the probe function to ensure the device was
actually connected and working before successfully completing a
probe. If the device was actually there, but the I2C bus was not
ready yet for whatever reason, the probe fails permanently.
Change the probe so that we defer the probe on a regmap read
failure so that we try the probe again when the dependent drivers
are potentially loaded. This should not affect the case where the
device truly isn't present because the probe will never successfully
complete.
Fixes: 2aa916e67d ("sc16is7xx: Read the LSR register for basic device presence check")
Cc: stable@vger.kernel.org
Signed-off-by: Annaliese McDermond <nh6z@nh6z.net>
Link: https://lore.kernel.org/r/010101787f9c3fd8-c1815c00-2d6b-4c85-a96a-a13e68597fda-000000@us-west-2.amazonses.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For each device, the nosy driver allocates a pcilynx structure.
A use-after-free might happen in the following scenario:
1. Open nosy device for the first time and call ioctl with command
NOSY_IOC_START, then a new client A will be malloced and added to
doubly linked list.
2. Open nosy device for the second time and call ioctl with command
NOSY_IOC_START, then a new client B will be malloced and added to
doubly linked list.
3. Call ioctl with command NOSY_IOC_START for client A, then client A
will be readded to the doubly linked list. Now the doubly linked
list is messed up.
4. Close the first nosy device and nosy_release will be called. In
nosy_release, client A will be unlinked and freed.
5. Close the second nosy device, and client A will be referenced,
resulting in UAF.
The root cause of this bug is that the element in the doubly linked list
is reentered into the list.
Fix this bug by adding a check before inserting a client. If a client
is already in the linked list, don't insert it.
The following KASAN report reveals it:
BUG: KASAN: use-after-free in nosy_release+0x1ea/0x210
Write of size 8 at addr ffff888102ad7360 by task poc
CPU: 3 PID: 337 Comm: poc Not tainted 5.12.0-rc5+ #6
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Call Trace:
nosy_release+0x1ea/0x210
__fput+0x1e2/0x840
task_work_run+0xe8/0x180
exit_to_user_mode_prepare+0x114/0x120
syscall_exit_to_user_mode+0x1d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
Allocated by task 337:
nosy_open+0x154/0x4d0
misc_open+0x2ec/0x410
chrdev_open+0x20d/0x5a0
do_dentry_open+0x40f/0xe80
path_openat+0x1cf9/0x37b0
do_filp_open+0x16d/0x390
do_sys_openat2+0x11d/0x360
__x64_sys_open+0xfd/0x1a0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
Freed by task 337:
kfree+0x8f/0x210
nosy_release+0x158/0x210
__fput+0x1e2/0x840
task_work_run+0xe8/0x180
exit_to_user_mode_prepare+0x114/0x120
syscall_exit_to_user_mode+0x1d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
The buggy address belongs to the object at ffff888102ad7300 which belongs to the cache kmalloc-128 of size 128
The buggy address is located 96 bytes inside of 128-byte region [ffff888102ad7300, ffff888102ad7380)
[ Modified to use 'list_empty()' inside proper lock - Linus ]
Link: https://lore.kernel.org/lkml/1617433116-5930-1-git-send-email-zheyuma97@gmail.com/
Reported-and-tested-by: 马哲宇 (Zheyu Ma) <zheyuma97@gmail.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=edGl
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.12-2021-04-03' of git://git.kernel.dk/linux-block
POull io_uring fix from Jens Axboe:
"Just fixing a silly braino in a previous patch, where we'd end up
failing to compile if CONFIG_BLOCK isn't enabled.
Not that a lot of people do that, but kernel bot spotted it and it's
probably prudent to just flush this out now before -rc6.
Sorry about that, none of my test compile configs have !CONFIG_BLOCK"
* tag 'io_uring-5.12-2021-04-03' of git://git.kernel.dk/linux-block:
io_uring: fix !CONFIG_BLOCK compilation failure
The header file <linux/errno.h> is already included above and can be
removed here.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
I have a handful of fixes for 5.12:
* A fix for a stack tracing regression related to "const register asm"
variables, which have unexpected behavior.
* A fix to put_user() that ensures the value to be written is evaluated
before enabling access to userspace memory..
* A fix to align the exception vector table correctly, so we don't rely
on the firmware's handling of unaligned accesses.
* A build fix to make NUMA depend on MMU, which triggers some
randconfigs.
-----BEGIN PGP SIGNATURE-----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=DUBG
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"A handful of fixes for 5.12:
- fix a stack tracing regression related to "const register asm"
variables, which have unexpected behavior.
- ensure the value to be written by put_user() is evaluated before
enabling access to userspace memory..
- align the exception vector table correctly, so we don't rely on the
firmware's handling of unaligned accesses.
- build fix to make NUMA depend on MMU, which triggered on some
randconfigs"
* tag 'riscv-for-linus-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Make NUMA depend on MMU
riscv: remove unneeded semicolon
riscv,entry: fix misaligned base for excp_vect_table
riscv: evaluate put_user() arg before enabling user access
riscv: Drop const annotation for sp
Fix a bug on pseries where spurious wakeups from H_PROD would prevent partition migration
from succeeding.
Fix oopses seen in pcpu_alloc(), caused by parallel faults of the percpu mapping causing
us to corrupt the protection key used for the mapping, and cause a fatal key fault.
Thanks to Aneesh Kumar K.V, Murilo Opsfelder Araujo, Nathan Lynch.
-----BEGIN PGP SIGNATURE-----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=booR
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.12-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fix a bug on pseries where spurious wakeups from H_PROD would prevent
partition migration from succeeding.
Fix oopses seen in pcpu_alloc(), caused by parallel faults of the
percpu mapping causing us to corrupt the protection key used for the
mapping, and cause a fatal key fault.
Thanks to Aneesh Kumar K.V, Murilo Opsfelder Araujo, and Nathan Lynch"
* tag 'powerpc-5.12-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm/book3s64: Use the correct storage key value when calling H_PROTECT
powerpc/pseries/mobility: handle premature return from H_JOIN
powerpc/pseries/mobility: use struct for shared state
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmBnkEUTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXv4YCADaSmGXyyLdoZQ5dH0oiWdt76aLNnuK
ckBDoiLWYkwOHQndqeQhsIxKBO+wEASSpua0fv1idewAk8zhw553IjCh2KZbtvzA
Mev5WwotBZnY2Hl1jdByqkZ/PS/Kms58qlvW4rcgg831DNLYGvc3soRiQy81GdIv
MVFJFFrZB4QsWcsjEGoN7ZUprG66dRixIBl5r/f426zRcpA/OlIEEKp0zRwYgyJL
rSfpxDAquEUsLgWC01y8g3ZBlpto63ZS28UPPC9McgEW+SK4+OOmMZu7t/ob2wyt
RopbX/meoPitMeruZy3z/jbUezW7Celz3dG2diL3WCX20HHjOmTjm6CM
=rax+
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed-20210402' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V fixes from Wei Liu:
"One fix from Lu Yunlong for a double free in hvfb_probe"
* tag 'hyperv-fixes-signed-20210402' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
video: hyperv_fb: Fix a double free in hvfb_probe
Here is a single driver core fix for a reported problem with differed
probing. It has been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYGhGpg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymgSACeJYD1EfjFSCB0gEmdjU261rWOcT0AoLTRkJW1
vywQNi5XNrbbmsWpxLsF
=wG2r
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fix from Greg KH:
"Here is a single driver core fix for a reported problem with differed
probing. It has been in linux-next for a while with no reported
problems"
* tag 'driver-core-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: clear deferred probe reason on probe retry
Here are a few small driver char/misc changes for 5.12-rc6.
Nothing major here, a few fixes for reported issues:
- interconnect fixes for problems found
- fbcon syzbot-found fix
- extcon fixes
- firmware stratix10 bugfix
- MAINTAINERS file update.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYGhGNA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylNFgCfRDpMVRjtAhrrdlTJaQRSXqd2vKAAn3Z08ggH
pvXxXEAF4NfSfuWcRehT
=kJts
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a few small driver char/misc changes for 5.12-rc6.
Nothing major here, a few fixes for reported issues:
- interconnect fixes for problems found
- fbcon syzbot-found fix
- extcon fixes
- firmware stratix10 bugfix
- MAINTAINERS file update.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
drivers: video: fbcon: fix NULL dereference in fbcon_cursor()
mei: allow map and unmap of client dma buffer only for disconnected client
MAINTAINERS: Add linux-phy list and patchwork
interconnect: Fix kerneldoc warning
firmware: stratix10-svc: reset COMMAND_RECONFIG_FLAG_PARTIAL to 0
extcon: Fix error handling in extcon_dev_register
extcon: Add stubs for extcon_register_notifier_all() functions
interconnect: core: fix error return code of icc_link_destroy()
interconnect: qcom: msm8939: remove rpm-ids from non-RPM nodes
Here are 2 rtl8192e staging driver fixes for reported problems. Both of
these have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYGhHAw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymeSQCg17KEmaRb10fxsb0GU/HxDbj3X2AAoIfLAeus
IDAfiYM/r8I1MXK3M0eI
=as4K
-----END PGP SIGNATURE-----
Merge tag 'staging-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are two rtl8192e staging driver fixes for reported problems.
Both of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8192e: Change state information from u16 to u8
staging: rtl8192e: Fix incorrect source in memcpy()
Here is a single serial driver fix for 5.12-rc6. Is is a revert of a
change that showed up in 5.9 that has been reported to cause problems.
It has been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYGhHew8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykyOQCgwM7aKSHU9MuRiyU8jVk1qEEwfHgAn3YcQ6bY
2IWKKJ4MUo2Iks/+2HS7
=oGYE
-----END PGP SIGNATURE-----
Merge tag 'tty-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fix from Greg KH:
"Here is a single serial driver fix for 5.12-rc6. Is is a revert of a
change that showed up in 5.9 that has been reported to cause problems.
It has been in linux-next for a while with no reported issues"
* tag 'tty-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
soc: qcom-geni-se: Cleanup the code to remove proxy votes
Here are a few small USB driver fixes for 5.12-rc6 to resolve reported
problems.
They include:
- a number of cdc-acm fixes for reported problems. It seems
more people are using this driver lately...
- dwc3 driver fixes for reported problems, and fixes for the
fixes :)
- dwc2 driver fixes for reported issues.
- musb driver fix.
- new USB quirk additions.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYGhIJQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykdtgCg2cYTu8JGffixl0trMkqRI23AC5wAnAz7Sm+k
jcQbXq0ErUypFqZQrMLb
=UyXV
-----END PGP SIGNATURE-----
Merge tag 'usb-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a few small USB driver fixes for 5.12-rc6 to resolve reported
problems.
They include:
- a number of cdc-acm fixes for reported problems. It seems more
people are using this driver lately...
- dwc3 driver fixes for reported problems, and fixes for the fixes :)
- dwc2 driver fixes for reported issues.
- musb driver fix.
- new USB quirk additions.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (23 commits)
usb: dwc2: Prevent core suspend when port connection flag is 0
usb: dwc2: Fix HPRT0.PrtSusp bit setting for HiKey 960 board.
usb: musb: Fix suspend with devices connected for a64
usb: xhci-mtk: fix broken streams issue on 0.96 xHCI
usb: dwc3: gadget: Clear DEP flags after stop transfers in ep disable
usbip: vhci_hcd fix shift out-of-bounds in vhci_hub_control()
USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem
USB: cdc-acm: do not log successful probe on later errors
USB: cdc-acm: always claim data interface
USB: cdc-acm: use negation for NULL checks
USB: cdc-acm: clean up probe error labels
USB: cdc-acm: drop redundant driver-data reset
USB: cdc-acm: drop redundant driver-data assignment
USB: cdc-acm: fix use-after-free after probe failure
USB: cdc-acm: fix double free on probe failure
USB: cdc-acm: downgrade message to debug
USB: cdc-acm: untangle a circular dependency between callback and softint
cdc-acm: fix BREAK rx code path adding necessary calls
usb: gadget: udc: amd5536udc_pci fix null-ptr-dereference
usb: dwc3: pci: Enable dis_uX_susphy_quirk for Intel Merrifield
...
Single fix to iscsi for a rare race condition which can cause a kernel
panic.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYGe3ZCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishaxZAQDt/zcv
xvK+2qWNsqVse32hknc3RpdMWUh4JE1pKfSvgwD/X7c3goqQ8dEyEK0cpXLNpw9D
kOOQxTVVCxFImwActdg=
=VlUo
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"A single fix to iscsi for a rare race condition which can cause a
kernel panic"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: iscsi: Fix race condition between login and sync thread
kernel test robot correctly pinpoints a compilation failure if
CONFIG_BLOCK isn't set:
fs/io_uring.c: In function '__io_complete_rw':
>> fs/io_uring.c:2509:48: error: implicit declaration of function 'io_rw_should_reissue'; did you mean 'io_rw_reissue'? [-Werror=implicit-function-declaration]
2509 | if ((res == -EAGAIN || res == -EOPNOTSUPP) && io_rw_should_reissue(req)) {
| ^~~~~~~~~~~~~~~~~~~~
| io_rw_reissue
cc1: some warnings being treated as errors
Ensure that we have a stub declaration of io_rw_should_reissue() for
!CONFIG_BLOCK.
Fixes: 230d50d448 ("io_uring: move reissue into regular IO path")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=8odY
-----END PGP SIGNATURE-----
Merge tag 'block-5.12-2021-04-02' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Remove comment that never came to fruition in 22 years of development
(Christoph)
- Remove unused request flag (Christoph)
- Fix for null_blk fake timeout handling (Damien)
- Fix for IOCB_NOWAIT being ignored for O_DIRECT on raw bdevs (Pavel)
- Error propagation fix for multiple split bios (Yufen)
* tag 'block-5.12-2021-04-02' of git://git.kernel.dk/linux-block:
block: remove the unused RQF_ALLOCED flag
block: update a few comments in uapi/linux/blkpg.h
block: don't ignore REQ_NOWAIT for direct IO
null_blk: fix command timeout completion handling
block: only update parent bi_status when bio fail
-----BEGIN PGP SIGNATURE-----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=pxfZ
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.12-2021-04-02' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Nothing really major in here, and finally nothing really related to
signals. A few minor fixups related to the threading changes, and some
general fixes, that's it.
There's the pending gdb-get-confused-about-arch, but that's more of a
cosmetic issue, nothing that hinder use of it. And given that other
archs will likely be affected by that oddity too, better to postpone
any changes there until 5.13 imho"
* tag 'io_uring-5.12-2021-04-02' of git://git.kernel.dk/linux-block:
io_uring: move reissue into regular IO path
io_uring: fix EIOCBQUEUED iter revert
io_uring/io-wq: protect against sprintf overflow
io_uring: don't mark S_ISBLK async work as unbounded
io_uring: drop sqd lock before handling signals for SQPOLL
io_uring: handle setup-failed ctx in kill_timeouts
io_uring: always go for cancellation spin on exec
- Ensure that the memory occupied by ACPI tables on x86 will always
be reserved to prevent it from being allocated for other purposes
which was possible in some cases (Rafael Wysocki).
- Fix the ACPI device enumeration code to prevent it from attempting
to evaluate the _STA control method for devices with unmet
dependencies which is likely to fail (Hans de Goede).
- Fix the handling of CPU0 wakeup in the ACPI processor driver to
prevent CPU0 online failures from occurring (Vitaly Kuznetsov).
-----BEGIN PGP SIGNATURE-----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=8KTH
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix an ACPI tables management issue, an issue related to the
ACPI enumeration of devices and CPU wakeup in the ACPI processor
driver.
Specifics:
- Ensure that the memory occupied by ACPI tables on x86 will always
be reserved to prevent it from being allocated for other purposes
which was possible in some cases (Rafael Wysocki).
- Fix the ACPI device enumeration code to prevent it from attempting
to evaluate the _STA control method for devices with unmet
dependencies which is likely to fail (Hans de Goede).
- Fix the handling of CPU0 wakeup in the ACPI processor driver to
prevent CPU0 online failures from occurring (Vitaly Kuznetsov)"
* tag 'acpi-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: processor: Fix CPU0 wakeup in acpi_idle_play_dead()
ACPI: scan: Fix _STA getting called on devices with unmet dependencies
ACPI: tables: x86: Reserve memory occupied by ACPI tables
- Fix race condition related to the handling of supplier devices
during consumer device probe and fix the order of decrementation
of two related reference counters in the runtime PM core code
handling supplier devices (Adrian Hunter).
- Fix kerneldoc comments in cpufreq that have not been updated along
with the functions documented by them (Geert Uytterhoeven).
-----BEGIN PGP SIGNATURE-----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=nGA7
-----END PGP SIGNATURE-----
Merge tag 'pm-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a race condition and an ordering issue related to using
device links in the runtime PM framework and two kerneldoc comments in
cpufreq.
Specifics:
- Fix race condition related to the handling of supplier devices
during consumer device probe and fix the order of decrementation of
two related reference counters in the runtime PM core code handling
supplier devices (Adrian Hunter).
- Fix kerneldoc comments in cpufreq that have not been updated along
with the functions documented by them (Geert Uytterhoeven)"
* tag 'pm-5.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: runtime: Fix race getting/putting suppliers at probe
PM: runtime: Fix ordering in pm_runtime_get_suppliers()
cpufreq: Fix scaling_{available,boost}_frequencies_show() comments
The big top of the file comment talk about grand plans that never
happened, so remove them to not confuse the readers. Also mark the
devname and volname fields as ignored as they were never used by the
kernel.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The macro that creates both the structure and the format displayed
to user space for the stack trace event was changed a while ago
to fix the parsing by user space tooling. But this change also modified
the structure used to store the stack trace event. It changed the
caller array field from [0] to [8]. Even though the size in the ring
buffer is dynamic and can be something other than 8 (user space knows
how to handle this), the 8 extra words was not accounted for when
reserving the event on the ring buffer, and added 8 more entries, due
to the calculation of "sizeof(*entry) + nr_entries * sizeof(long)",
as the sizeof(*entry) now contains 8 entries. The size of the caller
field needs to be subtracted from the size of the entry to create
the correct allocation size.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYGccURQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qiboAPwNM1q8A7EFLDGfj+3tXksvp4H3hXd3
ErMd2OMlsNQtRAD9GGmYyt2OtFdxZWzKOSEC07vdxq2TYTz50mqJM81YbgE=
=7hwx
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.12-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix stack trace entry size to stop showing garbage
The macro that creates both the structure and the format displayed to
user space for the stack trace event was changed a while ago to fix
the parsing by user space tooling. But this change also modified the
structure used to store the stack trace event. It changed the caller
array field from [0] to [8].
Even though the size in the ring buffer is dynamic and can be
something other than 8 (user space knows how to handle this), the 8
extra words was not accounted for when reserving the event on the ring
buffer, and added 8 more entries, due to the calculation of
"sizeof(*entry) + nr_entries * sizeof(long)", as the sizeof(*entry)
now contains 8 entries.
The size of the caller field needs to be subtracted from the size of
the entry to create the correct allocation size"
* tag 'trace-v5.12-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix stack trace event size
It's non-obvious how retry is done for block backed files, when it happens
off the kiocb done path. It also makes it tricky to deal with the iov_iter
handling.
Just mark the req as needing a reissue, and handling it from the
submission path instead. This makes it directly obvious that we're not
re-importing the iovec from userspace past the submit point, and it means
that we can just reuse our usual -EAGAIN retry path from the read/write
handling.
At some point in the future, we'll gain the ability to always reliably
return -EAGAIN through the stack. A previous attempt on the block side
didn't pan out and got reverted, hence the need to check for this
information out-of-band right now.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If IOCB_NOWAIT is set on submission, then that needs to get propagated to
REQ_NOWAIT on the block side. Otherwise we completely lose this
information, and any issuer of IOCB_NOWAIT IO will potentially end up
blocking on eg request allocation on the storage side.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
symbol 'brcmuart_debugfs_root' is not used outside of 8250_bcm7271.c,
so this commit marks it static.
Signed-off-by: Zucheng Zheng <zhengzucheng@huawei.com>
Link: https://lore.kernel.org/r/20210401074919.56573-1-zhengzucheng@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case of error, the function devm_ioremap() returns NULL
pointer not ERR_PTR(). The IS_ERR() test in the return value
check should be replaced with NULL test.
Fixes: 41a469482d ("serial: 8250: Add new 8250-core based Broadcom STB driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Al Cooper <alcooperx@gmail.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210329140659.1832950-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NUMA is useless when NOMMU, and it leads some build error,
make it depend on MMU.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Eliminate the following coccicheck warning:
./arch/riscv/mm/kasan_init.c:219:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Johan Hovold
Guobin Huang
Annaliese McDermond
Martin Devera
Greg Kroah-Hartman
Linus Torvalds
Zheyu Ma
Zhen Lei
Jens Axboe
Christoph Hellwig
Rafael J. Wysocki
Pavel Begunkov
Xiaofei Tan
Zucheng Zheng
Wei Yongjun
Kefeng Wang
Yang Li