Граф коммитов

29 Коммитов

Автор SHA1 Сообщение Дата
Peter Hurley d41861ca19 tty: Replace ASYNC_INITIALIZED bit and update atomically
Replace ASYNC_INITIALIZED bit in the tty_port::flags field with
TTY_PORT_INITIALIZED bit in the tty_port::iflags field. Introduce helpers
tty_port_set_initialized() and tty_port_initialized() to abstract
atomic bit ops.

Note: the transforms for test_and_set_bit() and test_and_clear_bit()
are unnecessary as the state transitions are already mutually exclusive;
the tty lock prevents concurrent open/close/hangup.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30 09:26:55 -07:00
Federico Vaga 95e838c915 ipoctal: clear break interrupt as soon as it occurs
In some condition we receive the break interrupt but nothing is putted
in the Rx FIFO and the correspondend bit in the status register is not
set. Thus, no-one clear the interrupt and the handler will be called
forever.

This patch clear the break interrupt as soon as it occurs. Then, if the
break character '\0' is putted in the fifo we will manage it.

We can also unmask the Break interrupt but its bit in ISR is still set
on break. So I think is better to keep the registers clean.

Signed-off-by: Federico Vaga <federico.vaga@cern.ch>
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-23 23:26:42 -07:00
Federico Vaga 82a82340ba ipoctal: get carrier driver to avoid rmmod
Signed-off-by: Federico Vaga <federico.vaga@cern.ch>
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-23 23:13:13 -07:00
Federico Vaga 78f22bc29e ipoctal: reset function istead of duplicate code
Signed-off-by: Federico Vaga <federico.vaga@cern.ch>
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-23 23:13:13 -07:00
Rasmus Villemoes e0b04f2e94 drivers/ipack/devices/ipoctal.h: Fix typo in include guard
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-23 23:13:13 -07:00
Federico Vaga 4847cc073a ipoctal: request_irq after configuration
The request for an IRQ handler must be done after whole configuration. This
was not the case for this driver which request the IRQ in the middle of
the configuration. Sometimes, it happens that something is not completely
configured, we recieve an interrupt thus we stumble into troubles in the
IRQ handler.

Signed-off-by: Federico Vaga <federico.vaga@cern.ch>
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09 17:02:15 -07:00
Federico Vaga 968d04e8de ipoctal: protect only the real critical section
In some conditions (echo or particular sequence of special
characters), on buffer push, the tty layer calls the write operation
while we are holding the spinlock. This means deadlock within the same
process on kernels version < 3.12. It seems not a problem on recent
kernel, but the patch still valid as locking optimization.

The protected variables by the spinlock are: xmit_buf, nb_bytes,
pointer_read and pointer_write. So, this patch reduces the locked area
in the IRQ handler only to these variables. Most of the code inside the
locked area in the IRQ handler is not protected elsewhere; it means
that it is not protected at all.

Signed-off-by: Federico Vaga <federico.vaga@cern.ch>
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09 17:02:15 -07:00
Linus Torvalds 7ed214ac20 Char/Misc driver patches for 3.9-rc1
Here's the big char/misc driver patches for 3.9-rc1.
 
 Nothing major here, just lots of different driver updates (mei, hyperv, ipack,
 extcon, vmci, etc.).
 
 All of these have been in the linux-next tree for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlEmZJgACgkQMUfUDdst+ymhZgCgo2dn37r9uMCwgTSpxSq92Je5
 x8kAnRF1UnD6ZvySRIlLUBV5LW1YgFnK
 =i5HH
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver patches from Greg Kroah-Hartman:
 "Here's the big char/misc driver patches for 3.9-rc1.

  Nothing major here, just lots of different driver updates (mei,
  hyperv, ipack, extcon, vmci, etc.).

  All of these have been in the linux-next tree for a while."

* tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (209 commits)
  w1: w1_therm: Add force-pullup option for "broken" sensors
  w1: ds2482: Added 1-Wire pull-up support to the driver
  vme: add missing put_device() after device_register() fails
  extcon: max8997: Use workqueue to check cable state after completing boot of platform
  extcon: max8997: Set default UART/USB path on probe
  extcon: max8997: Consolidate duplicate code for checking ADC/CHG cable type
  extcon: max8997: Set default of ADC debounce time during initialization
  extcon: max8997: Remove duplicate code related to set H/W line path
  extcon: max8997: Move defined constant to header file
  extcon: max77693: Make max77693_extcon_cable static
  extcon: max8997: Remove unreachable code
  extcon: max8997: Make max8997_extcon_cable static
  extcon: max77693: Remove unnecessary goto statement to improve readability
  extcon: max77693: Convert to devm_input_allocate_device()
  extcon: gpio: Rename filename of extcon-gpio.c according to kernel naming style
  CREDITS: update email and address of Harald Hoyer
  extcon: arizona: Use MICDET for final microphone identification
  extcon: arizona: Always take the first HPDET reading as the final one
  extcon: arizona: Clear _trig_sts bits after jack detection
  extcon: arizona: Don't HPDET magic when headphones are enabled
  ...
2013-02-21 13:57:13 -08:00
Julia Lawall fc8d713ecd drivers/ipack/devices/ipoctal.c: adjust duplicate test
Delete successive tests to the same location.  The code tested the result
of a previous allocation, that itself was already tested.  It is changed to
test the result of the most recent allocation.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@s exists@
local idexpression y;
expression x,e;
@@

*if ( \(x == NULL\|IS_ERR(x)\|y != 0\) )
 { ... when forall
   return ...; }
... when != \(y = e\|y += e\|y -= e\|y |= e\|y &= e\|y++\|y--\|&y\)
    when != \(XT_GETPAGE(...,y)\|WMI_CMD_BUF(...)\)
*if ( \(x == NULL\|IS_ERR(x)\|y != 0\) )
 { ... when forall
   return ...; }
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-21 14:29:04 -08:00
Joe Millenbach 4f73bc4dd3 tty: Added a CONFIG_TTY option to allow removal of TTY
The option allows you to remove TTY and compile without errors. This
saves space on systems that won't support TTY interfaces anyway.
bloat-o-meter output is below.

The bulk of this patch consists of Kconfig changes adding "depends on
TTY" to various serial devices and similar drivers that require the TTY
layer.  Ideally, these dependencies would occur on a common intermediate
symbol such as SERIO, but most drivers "select SERIO" rather than
"depends on SERIO", and "select" does not respect dependencies.

bloat-o-meter output comparing our previous minimal to new minimal by
removing TTY.  The list is filtered to not show removed entries with awk
'$3 != "-"' as the list was very long.

add/remove: 0/226 grow/shrink: 2/14 up/down: 6/-35356 (-35350)
function                                     old     new   delta
chr_dev_init                                 166     170      +4
allow_signal                                  80      82      +2
static.__warned                              143     142      -1
disallow_signal                               63      62      -1
__set_special_pids                            95      94      -1
unregister_console                           126     121      -5
start_kernel                                 546     541      -5
register_console                             593     588      -5
copy_from_user                                45      40      -5
sys_setsid                                   128     120      -8
sys_vhangup                                   32      19     -13
do_exit                                     1543    1526     -17
bitmap_zero                                   60      40     -20
arch_local_irq_save                          137     117     -20
release_task                                 674     652     -22
static.spin_unlock_irqrestore                308     260     -48

Signed-off-by: Joe Millenbach <jmillenbach@gmail.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-18 16:15:27 -08:00
Samuel Iglesias Gonsalvez 2910fe2a7d ipack/devices/ipoctal: add missing rx_enable = 1
There was a bug in the code when managing a GE IP-OCTAL-485 board. The RX would
be enabled but we have a wrong state in the rx_enable flag.

Then, if the user changes the terminal settings, RX would not be enabled again.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-18 16:04:16 -08:00
Jiri Slaby 2e124b4a39 TTY: switch tty_flip_buffer_push
Now, we start converting tty buffer functions to actually use
tty_port. This will allow us to get rid of the need of tty in many
call sites. Only tty_port will needed and hence no more
tty_port_tty_get in those paths.

Now, the one where most of tty_port_tty_get gets removed:
tty_flip_buffer_push.

IOW we also closed all the races in drivers not using tty_port_tty_get
at all yet.

Also we move tty_flip_buffer_push declaration from include/linux/tty.h
to include/linux/tty_flip.h to all others while we are changing it
anyway.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15 22:30:15 -08:00
Jiri Slaby 92a19f9cec TTY: switch tty_insert_flip_char
Now, we start converting tty buffer functions to actually use
tty_port. This will allow us to get rid of the need of tty in many
call sites. Only tty_port will needed and hence no more
tty_port_tty_get in those paths.

tty_insert_flip_char is the next one to proceed. This one is used all
over the code, so the patch is huge.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15 22:21:36 -08:00
Samuel Iglesias Gonsalvez e0f8d323f3 ipack/devices/ipoctal: added shutdown callback
Added shutdown callback to disable RX and TX when there is no other client
accesing the device.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15 18:24:39 -08:00
Samuel Iglesias Gonsalvez b0d17fbdac ipack/devices/ipoctal: add rx_enable flag
Thus, we don't enable RX when a termios setup has been called, as it could be
disabled previously.

As the control registers (Rx, Tx flags specifically) cannot be read from the
device, we keep this info in rx_enable.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15 18:24:39 -08:00
Samuel Iglesias Gonsalvez b06073f963 ipack/devices/ipoctal: remove redundant tty_flip_buffer_push()
The function is already called in ipoctal_irq_rx()

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15 18:24:38 -08:00
Samuel Iglesias Gonsalvez e7e664fd68 ipack/devices/ipoctal: protect the channel data processing with a spinlock
We protect important data such as TX buffer pointer, nb_bytes counter and status
registers of the device, from accessing several times at the same time.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15 18:24:38 -08:00
Samuel Iglesias Gonsalvez 21d27ed461 ipack/devices/ipoctal: ack IRQ before processing it
Due to the IRQ processing, we can generate another IRQ that can come before we
end the previous one, so we lost it. E.g. when transmitting a character.

To allow the processing in SMP machines, we ack the IRQ at the beginning of the
IRQ handler.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15 18:24:38 -08:00
Samuel Iglesias Gonsalvez a3882b7814 ipack/devices/ipoctal: avoid re-enable RX two times.
RX is enabled when the tty port is open, so no need to do it in initialization
time: it can allow the device to receive characters but no TTY client is
listening to them.

It produced an infinite number of IRQ as RxFIFO is not read to clear that
IRQ in the device, so it is still pending.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15 18:24:38 -08:00
Samuel Iglesias Gonsalvez 9d01b6f064 ipack/devices/ipoctal: rework disable TX when the TX buffer is empty
Depending of the device, it disables the TX mode in different places when there
is no more data to transmit.

This patch reorder them and disable the TX mode in the same place.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15 18:24:38 -08:00
Samuel Iglesias Gonsalvez b5071f2cd8 ipack/devices/ipoctal: setup TTY_NORMAL flag for each character.
In case of several characters present in RxFIFO, they will have the flag of the
previous one, no matter if the actual character was received properly or not.

This patch fixes this bug.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15 18:24:38 -08:00
Samuel Iglesias Gonsalvez a1da13a67a ipack/devices/ipoctal: remove wait_queue and atomic_t board_write
Don't block the TTY client when sending characters.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15 18:24:38 -08:00
Samuel Iglesias Gonsalvez 7e5730d7c2 ipack/devices/ipoctal: fix kernel bug when using pppd
Trying to setup the pppd server to use ipoctal's serial ports, it says the ports
are busy the first time. If the operation is repeated, a kernel bug due to a
dereference of a NULL pointer appears.

Removing the one-access-only setup from the driver, removes this kernel bug.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15 18:24:38 -08:00
Alberto Garcia 69a6b9b1b6 ipack/devices/ipoctal: don't check if nb_bytes is < 0
It is an unsigned int so that check is pointless.

Signed-off-by: Alberto Garcia <agarcia@igalia.com>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15 18:24:37 -08:00
Alberto Garcia cc83f833c7 ipack/devices/ipoctal: Fix race condition during Tx
In order to transmit data, the driver enables Tx and sleeps until
*board_write is set to 1 by the interrupt handler.

It can happen, though, that the data is sent even before the process
is asleep. In this case *board_write must be set to 1 anyway,
otherwise we will be waiting for a condition that will never be true.

Signed-off-by: Alberto Garcia <agarcia@igalia.com>
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-15 18:24:37 -08:00
Linus Torvalds c6bd5bcc49 TTY/Serial merge for 3.8-rc1
Here's the big tty/serial tree set of changes for 3.8-rc1.
 
 Contained in here is a bunch more reworks of the tty port layer from Jiri and
 bugfixes from Alan, along with a number of other tty and serial driver updates
 by the various driver authors.
 
 Also, Jiri has been coerced^Wconvinced to be the co-maintainer of the TTY
 layer, which is much appreciated by me.
 
 All of these have been in the linux-next tree for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlDHhgwACgkQMUfUDdst+ynI6wCcC+YeBwncnoWHvwLAJOwAZpUL
 bysAn28o780/lOsTzp3P1Qcjvo69nldo
 =hN/g
 -----END PGP SIGNATURE-----

Merge tag 'tty-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull TTY/Serial merge from Greg Kroah-Hartman:
 "Here's the big tty/serial tree set of changes for 3.8-rc1.

  Contained in here is a bunch more reworks of the tty port layer from
  Jiri and bugfixes from Alan, along with a number of other tty and
  serial driver updates by the various driver authors.

  Also, Jiri has been coerced^Wconvinced to be the co-maintainer of the
  TTY layer, which is much appreciated by me.

  All of these have been in the linux-next tree for a while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

Fixed up some trivial conflicts in the staging tree, due to the fwserial
driver having come in both ways (but fixed up a bit in the serial tree),
and the ioctl handling in the dgrp driver having been done slightly
differently (staging tree got that one right, and removed both
TIOCGSOFTCAR and TIOCSSOFTCAR).

* tag 'tty-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (146 commits)
  staging: sb105x: fix potential NULL pointer dereference in mp_chars_in_buffer()
  staging/fwserial: Remove superfluous free
  staging/fwserial: Use WARN_ONCE when port table is corrupted
  staging/fwserial: Destruct embedded tty_port on teardown
  staging/fwserial: Fix build breakage when !CONFIG_BUG
  staging: fwserial: Add TTY-over-Firewire serial driver
  drivers/tty/serial/serial_core.c: clean up HIGH_BITS_OFFSET usage
  staging: dgrp: dgrp_tty.c: Audit the return values of get/put_user()
  staging: dgrp: dgrp_tty.c: Remove the TIOCSSOFTCAR ioctl handler from dgrp driver
  serial: ifx6x60: Add modem power off function in the platform reboot process
  serial: mxs-auart: unmap the scatter list before we copy the data
  serial: mxs-auart: disable the Receive Timeout Interrupt when DMA is enabled
  serial: max310x: Setup missing "can_sleep" field for GPIO
  tty/serial: fix ifx6x60.c declaration warning
  serial: samsung: add devicetree properties for non-Exynos SoCs
  serial: samsung: fix potential soft lockup during uart write
  tty: vt: Remove redundant null check before kfree.
  tty/8250 Add check for pci_ioremap_bar failure
  tty/8250 Add support for Commtech's Fastcom Async-335 and Fastcom Async-PCIe cards
  tty/8250 Add XR17D15x devices to the exar_handle_irq override
  ...
2012-12-11 14:08:47 -08:00
Samuel Iglesias Gonsalvez 27cf2d1b87 ipack: remove ipack_ids.h file
Its contents are merged into ipack.h. So this file is not needed.

Doing that, it simplifies the ipack-related driver development.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16 11:29:35 -08:00
Samuel Iglesias Gonsalvez 7dbce021a6 ipack: move header files to include/linux
Move ipack header files to include/linux/ directory where they belong.

Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16 11:29:35 -08:00
Greg Kroah-Hartman 05e5027efc Staging: ipack: move out of staging
The ipack subsystem is cleaned up enough to now move out of the staging
tree, and into drivers/ipack.

Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Cc: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16 08:14:18 -08:00