Граф коммитов

1121939 Коммитов

Автор SHA1 Сообщение Дата
Jim Cromie c45f67ace8 dyndbg: add ddebug_attach_module_classes
Add ddebug_attach_module_classes(), call it from ddebug_add_module().
It scans the classes/section its given, finds records where the
module-name matches the module being added, and adds them to the
module's maps list.  No locking here, since the record
isn't yet linked into the ddebug_tables list.

It is called indirectly from 2 sources:

 - from load_module(), where it scans the module's __dyndbg_classes
   section, which contains DYNAMIC_DEBUG_CLASSES definitions from just
   the module.

 - from dynamic_debug_init(), where all DYNAMIC_DEBUG_CLASSES
   definitions of each builtin module have been packed together.
   This is why ddebug_attach_module_classes() checks module-name.

NOTES

Its (highly) likely that builtin classes will be ordered by module
name (just like prdbg descriptors are in the __dyndbg section).  So
the list can be replaced by a vector (ptr + length), which will work
for loaded modules too.  This would imitate whats currently done for
the _ddebug descriptors.

That said, converting to vector,len is close to pointless; a small
minority of modules will ever define a class-map, and almost all of
them will have only 1 or 2 class-maps, so theres only a couple dozen
pointers to save.  TODO: re-evaluate for lines removable.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-17-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 17:04:49 +02:00
Jim Cromie 66f4006b6a kernel/module: add __dyndbg_classes section
Add __dyndbg_classes section, using __dyndbg as a model. Use it:

vmlinux.lds.h:

KEEP the new section, which also silences orphan section warning on
loadable modules.  Add (__start_/__stop_)__dyndbg_classes linker
symbols for the c externs (below).

kernel/module/main.c:
- fill new fields in find_module_sections(), using section_objs()
- extend callchain prototypes
  to pass classes, length
  load_module(): pass new info to dynamic_debug_setup()
  dynamic_debug_setup(): new params, pass through to ddebug_add_module()

dynamic_debug.c:
- add externs to the linker symbols.

ddebug_add_module():
- It currently builds a debug_table, and *will* find and attach classes.

dynamic_debug_init():
- add class fields to the _ddebug_info cursor var: di.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-16-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 17:04:49 +02:00
Jim Cromie aad0214f30 dyndbg: add DECLARE_DYNDBG_CLASSMAP macro
Using DECLARE_DYNDBG_CLASSMAP, modules can declare up to 31 classnames.
By doing so, they authorize dyndbg to manipulate class'd prdbgs (ie:
__pr_debug_cls, and soon drm_*dbg), ala::

   :#> echo class DRM_UT_KMS +p > /proc/dynamic_debug/control

The macro declares and initializes a static struct ddebug_class_map::

 - maps approved class-names to class_ids used in module,
   by array order. forex: DRM_UT_*
 - class-name vals allow validation of "class FOO" queries
   using macro is opt-in
 - enum class_map_type - determines interface, behavior

Each module has its own class-type and class_id space, and only known
class-names will be authorized for a manipulation.  Only DRM modules
should know and respont to this:

  :#> echo class DRM_UT_CORE +p > control	# across all modules

pr_debugs (with default class_id) are still controllable as before.

DECLARE_DYNDBG_CLASSMAP(_var, _maptype, _base, classes...) is::

 _var: name of the static struct var. user passes to module_param_cb()
       if they want a sysfs node.

 _maptype: this is hard-coded to DD_CLASS_TYPE_DISJOINT_BITS for now.

 _base: usually 0, it allows splitting 31 classes into subranges, so
 	that multiple classes / sysfs-nodes can share the module's
 	class-id space.

 classes: list of class_name strings, these are mapped to class-ids
 	  starting at _base.  This class-names list must have a
 	  corresponding ENUM, with SYMBOLS that match the literals,
 	  and 1st enum val = _base.

enum class_map_type has 4 values, on 2 factors::

 - classes are disjoint/independent vs relative/x<y/verbosity.
   disjoint is basis, verbosity by overlay.

 - input NUMBERS vs [+-]CLASS_NAMES
   uints, ideally hex.  vs  +DRM_UT_CORE,-DRM_UT_KMS

DD_CLASS_TYPE_DISJOINT_BITS: classes are separate, one per bit.
   expecting hex input. built for drm.debug, basis for other types.

DD_CLASS_TYPE_DISJOINT_NAMES: input is a CSV of [+-]CLASS_NAMES,
   classes are independent, like DISJOINT

DD_CLASS_TYPE_LEVEL_NUM: input is numeric level, 0-N.
   0 implies silence. use printk to break that.
   relative levels applied on bitmaps.

DD_CLASS_TYPE_LEVEL_NAMES: input is a CSV of [+-]CLASS_NAMES,
   names like: ERR,WARNING,NOTICE,INFO,DEBUG
   avoiding EMERG,ALERT,CRIT,ERR - no point.

NOTES:

The macro places the initialized struct ddebug_class_map into the
__dyndbg_classes section.  That draws an 'orphan' warning which we
handle in the next commit.  The struct attributes are necessary:
__aligned(8) fixed null-ptr derefs, and __used is needed by drm
drivers, which declare class-maps, but don't also declare a
sysfs-param, and thus dont ref the classmap.  The __used insures that
the linkage is made, then the class-map is found at load-time.

While its possible to handle both NAMES and NUMBERS in the same
sys-interface, there is ambiguity to avoid, by disallowing them
together.  Later, if ambiguities are resolved, 2 new enums can permit
both inputs, on verbose & independent types separately, and authors
can select the interface style they like.

The plan is to implement LEVELS in the callbacks, outside of
ddebug_exec_query(), which for simplicity will treat the CLASSES in
the map as disjoint.  The callbacks can see map-type, and apply ++/--
loops (or bitops) to force the relative meanings across the
class-bitmap.

RFC: That leaves 2 issues:

1. doing LEVELs in callbacks means that the native >control interface
doesn't enforce the LEVELS relationship, so you could confusingly have
V3 enabled, but V1 disabled.  OTOH, the control iface already allows
infinite tweaking of the underlying callsites; sysfs node readback can
only tell the user what they previously wrote.

2. All dyndbg >control reduces to a query/command, includes +/-, which
is at-root a kernel patching operation with +/- semantics.  And the
_NAMES handling exposes it to the user, making it API-adjacent.

And its not just >control where +/- gets used (which is settled), the
new place is with sysfs-nodes exposing _*_NAMES classes, and here its
subtly different.

_DISJOINT_NAMES: is simple, independent
_LEVEL_NAMES: masks-on bits 0 .. N-1, N..max off

  # turn on L3,L2,L1 others off
  echo +L3 > /sys/module/test_dynamic_debug/parameters/p_level_names

  # turn on L2,L1 others off
  echo -L3 > /sys/module/test_dynamic_debug/parameters/p_level_names

IOW, the - changes the threshold-on bitpos by 1.

Alternatively, we could treat the +/- as half-duplex, where -L3 turns
off L>2 (and ignores L1), and +L2 would turn on L<=2 (and ignore others).

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-15-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 17:04:49 +02:00
Jim Cromie 3fc95d80a5 dyndbg: add __pr_debug_cls for testing
For selftest purposes, add __pr_debug_cls(class, fmt, ...)

I didn't think we'd need to define this, since DRM effectively has it
already in drm_dbg, drm_devdbg.  But test_dynamic_debug needs it in
order to demonstrate all the moving parts.

Note the __ prefix; its not intended for general use, at least until a
need emerges.  ISTM the drm.debug model (macro wrappers inserting enum
const 1st arg) is the baseline approach.

That said, nouveau might want it for easy use in its debug macros. TBD.

NB: it does require a builtin-constant class, __pr_debug_cls(i++, ...)
is disallowed by compiler.

Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-14-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 17:04:49 +02:00
Jim Cromie ca90fca7f7 dyndbg: add class_id to pr_debug callsites
DRM issues ~10 exclusive categories of debug messages; to represent
this directly in dyndbg, add a new 6-bit field: struct _ddebug.class_id.
This gives us 64 classes, which should be more than enough.

  #> echo 0x012345678 > /sys/module/drm/parameters/debug

All existing callsites are initialized with _DPRINTK_CLASS_DFLT, which
is 2^6-1.  This reserves 0-62 for use in new categorized/class'd
pr_debugs, which fits perfectly with natural enums (ints: 0..N).

Thats done by extending the init macro: DEFINE_DYNAMIC_DEBUG_METADATA()
with _CLS(cls, ...) suffix, and redefing old name using extended name.

Then extend the factory macro callchain with _cls() versions to provide
the callsite.class_id, with old-names passing _DPRINTK_CLASS_DFLT.

This sets us up to create class'd prdebug callsites (class'd callsites
are those with .class_id != _DPRINTK_CLASS_DFLT).

No behavior change.

cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-13-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 17:04:48 +02:00
Jim Cromie b7b4eebdba dyndbg: gather __dyndbg[] state into struct _ddebug_info
This new struct composes the linker provided (vector,len) section,
and provides a place to add other __dyndbg[] state-data later:

  descs - the vector of descriptors in __dyndbg section.
  num_descs - length of the data/section.

Use it, in several different ways, as follows:

In lib/dynamic_debug.c:

ddebug_add_module(): Alter params-list, replacing 2 args (array,index)
with a struct _ddebug_info * containing them both, with room for
expansion.  This helps future-proof the function prototype against the
looming addition of class-map info into the dyndbg-state, by providing
a place to add more member fields later.

NB: later add static struct _ddebug_info builtins_state declaration,
not needed yet.

ddebug_add_module() is called in 2 contexts:

In dynamic_debug_init(), declare, init a struct _ddebug_info di
auto-var to use as a cursor.  Then iterate over the prdbg blocks of
the builtin modules, and update the di cursor before calling
_add_module for each.

Its called from kernel/module/main.c:load_info() for each loaded
module:

In internal.h, alter struct load_info, replacing the dyndbg array,len
fields with an embedded _ddebug_info containing them both; and
populate its members in find_module_sections().

The 2 calling contexts differ in that _init deals with contiguous
subranges of __dyndbgs[] section, packed together, while loadable
modules are added one at a time.

So rename ddebug_add_module() into outer/__inner fns, call __inner
from _init, and provide the offset into the builtin __dyndbgs[] where
the module's prdbgs reside.  The cursor provides start, len of the
subrange for each.  The offset will be used later to pack the results
of builtin __dyndbg_sites[] de-duplication, and is 0 and unneeded for
loadable modules,

Note:

kernel/module/main.c includes <dynamic_debug.h> for struct
_ddeubg_info.  This might be prone to include loops, since its also
included by printk.h.  Nothing has broken in robot-land on this.

cc: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-12-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 17:04:48 +02:00
Jim Cromie aa86a15453 dyndbg: cleanup auto vars in dynamic_debug_init
rework var-names for clarity, regularity
rename variables
  - n to mod_sites - it counts sites-per-module
  - entries to i - display only
  - iter_start to iter_mod_start - marks start of each module's subrange
  - modct to mod_ct - stylistic

new iterator var:
  - site - cursor parallel to iter
    1st step towards 'demotion' of iter->site, for removal later

treat vars as iters:
  - drop init at top
    init just above for-loop, in a textual block

Acked-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-11-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 17:04:48 +02:00
Jim Cromie e26ef3af96 dyndbg: drop EXPORTed dynamic_debug_exec_queries
This exported fn is unused, and will not be needed. Lets dump it.

The export was added to let drm control pr_debugs, as part of using
them to avoid drm_debug_enabled overheads.  But its better to just
implement the drm.debug bitmap interface, then its available for
everyone.

Fixes: a2d375eda7 ("dyndbg: refine export, rename to dynamic_debug_exec_queries()")
Fixes: 4c0d77828d ("dyndbg: export ddebug_exec_queries")
Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-10-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 16:58:23 +02:00
Jim Cromie 683263a5e0 dyndbg: add test_dynamic_debug module
Provide a simple module to allow testing DYNAMIC_DEBUG behavior.  It
calls do_prints() from module-init, and with a sysfs-node.

  dmesg -C
  dmesg -w &
  modprobe test_dynamic_debug dyndbg=+p
  echo 1 > /sys/module/dynamic_debug/parameters/verbose

  cat /sys/module/test_dynamic_debug/parameters/do_prints
  echo module test_dynamic_debug +mftl > /proc/dynamic_debug/control
  echo junk > /sys/module/test_dynamic_debug/parameters/do_prints

Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-9-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 16:58:23 +02:00
Jim Cromie e75ef56f74 dyndbg: let query-modname override actual module name
dyndbg's control-parser: ddebug_parse_query(), requires that search
terms: module, func, file, lineno, are used only once in a query; a
thing cannot be named both foo and bar.

The cited commit added an overriding module modname, taken from the
module loader, which is authoritative.  So it set query.module 1st,
which disallowed its use in the query-string.

But now, its useful to allow a module-load to enable classes across a
whole (or part of) a subsystem at once.

  # enable (dynamic-debug in) drm only
  modprobe drm dyndbg="class DRM_UT_CORE +p"

  # get drm_helper too
  modprobe drm dyndbg="class DRM_UT_CORE module drm* +p"

  # get everything that knows DRM_UT_CORE
  modprobe drm dyndbg="class DRM_UT_CORE module * +p"

  # also for boot-args:
  drm.dyndbg="class DRM_UT_CORE module * +p"

So convert the override into a default, by filling it only when/after
the query-string omitted the module.

NB: the query class FOO handling is forthcoming.

Fixes: 8e59b5cfb9 dynamic_debug: add modname arg to exec_query callchain
Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-8-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 16:58:23 +02:00
Jim Cromie 47ea6f99d0 dyndbg: use ESCAPE_SPACE for cat control
`cat control` currently does octal escape, so '\n' becomes "\012".
Change this to display as "\n" instead, which reads much cleaner.

   :#> head -n7 /proc/dynamic_debug/control
   # filename:lineno [module]function flags format
   init/main.c:1179 [main]initcall_blacklist =_ "blacklisting initcall %s\n"
   init/main.c:1218 [main]initcall_blacklisted =_ "initcall %s blacklisted\n"
   init/main.c:1424 [main]run_init_process =_ "  with arguments:\n"
   init/main.c:1426 [main]run_init_process =_ "    %s\n"
   init/main.c:1427 [main]run_init_process =_ "  with environment:\n"
   init/main.c:1429 [main]run_init_process =_ "    %s\n"

Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-7-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 16:58:23 +02:00
Jim Cromie 773beabbb8 dyndbg: reverse module.callsite walk in cat control
Walk the module's vector of callsites backwards; ie N..0.  This
"corrects" the backwards appearance of a module's prdbg vector when
walked 0..N.  I think this is due to linker mechanics, which I'm
inclined to treat as immutable, and the order is fixable in display.

No functional changes.

Combined with previous commit, which reversed tables-list, we get:

  :#> head -n7 /proc/dynamic_debug/control
  # filename:lineno [module]function flags format
  init/main.c:1179 [main]initcall_blacklist =_ "blacklisting initcall %s\012"
  init/main.c:1218 [main]initcall_blacklisted =_ "initcall %s blacklisted\012"
  init/main.c:1424 [main]run_init_process =_ "  with arguments:\012"
  init/main.c:1426 [main]run_init_process =_ "    %s\012"
  init/main.c:1427 [main]run_init_process =_ "  with environment:\012"
  init/main.c:1429 [main]run_init_process =_ "    %s\012"

Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-6-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 16:58:23 +02:00
Jim Cromie 2ad556f700 dyndbg: reverse module walk in cat control
/proc/dynamic_debug/control walks the prdbg catalog in "reverse",
fix this by adding new ddebug_tables to tail of list.

This puts init/main.c entries 1st, which looks more than coincidental.

no functional changes.

Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-5-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 16:58:23 +02:00
Jim Cromie bfa3ca448e dyndbg: show both old and new in change-info
print "old => new" flag values to the info("change") message.

no functional change.

Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-4-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 16:58:23 +02:00
Jim Cromie 85d6b66d31 dyndbg: fix module.dyndbg handling
For CONFIG_DYNAMIC_DEBUG=N, the ddebug_dyndbg_module_param_cb()
stub-fn is too permissive:

bash-5.1# modprobe drm JUNKdyndbg
bash-5.1# modprobe drm dyndbgJUNK
[   42.933220] dyndbg param is supported only in CONFIG_DYNAMIC_DEBUG builds
[   42.937484] ACPI: bus type drm_connector registered

This caused no ill effects, because unknown parameters are either
ignored by default with an "unknown parameter" warning, or ignored
because dyndbg allows its no-effect use on non-dyndbg builds.

But since the code has an explicit feedback message, it should be
issued accurately.  Fix with strcmp for exact param-name match.

Fixes: b48420c1d3 dynamic_debug: make dynamic-debug work for module initialization
Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-3-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 16:58:23 +02:00
Jim Cromie ee879be38b dyndbg: fix static_branch manipulation
In https://lore.kernel.org/lkml/20211209150910.GA23668@axis.com/

Vincent's patch commented on, and worked around, a bug toggling
static_branch's, when a 2nd PRINTK-ish flag was added.  The bug
results in a premature static_branch_disable when the 1st of 2 flags
was disabled.

The cited commit computed newflags, but then in the JUMP_LABEL block,
failed to use that result, instead using just one of the terms in it.
Using newflags instead made the code work properly.

This is Vincents test-case, reduced.  It needs the 2nd flag to
demonstrate the bug, but it's explanatory here.

pt_test() {
    echo 5 > /sys/module/dynamic_debug/verbose

    site="module tcp" # just one callsite
    echo " $site =_ " > /proc/dynamic_debug/control # clear it

    # A B ~A ~B
    for flg in +T +p "-T #broke here" -p; do
	echo " $site $flg " > /proc/dynamic_debug/control
    done;

    # A B ~B ~A
    for flg in +T +p "-p #broke here" -T; do
	echo " $site $flg " > /proc/dynamic_debug/control
    done
}
pt_test

Fixes: 84da83a6ff dyndbg: combine flags & mask into a struct, simplify with it
CC: vincent.whitchurch@axis.com
Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-2-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-07 16:58:23 +02:00
Christophe JAILLET 61742a7cd5 devres: Slightly optimize alloc_dr()
If the gfp flag used for the memory allocation already has __GFP_ZERO,
then there is no need to explicitly clear the "struct devres_node". It is
already zeroed.

This saves a few cycles when using devm_zalloc() and co.

In the case of devres_alloc() (which calls __devres_alloc_node()), the
compiler could remove the test and the memset() because it should be able
to see that the __GFP_ZERO flag is set.
So this would make the code both faster and smaller.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/d255bd871484e63cdd628e819f929e2df59afb02.1658352383.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-01 18:17:14 +02:00
Brian Norris 6bb7ea3afd drivers: base: Print error code on synthetic uevent failure
If we're going to log the failure, we might as well log the return code
too.

Signed-off-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20220824165213.1.Ifdb98af3d0c23708a11d8d5ae5697bdb7e96a3cc@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-01 18:15:50 +02:00
Yang Yingliang e9628e015f class: use IS_ERR_OR_NULL() helper in class_unregister()
Use IS_ERR_OR_NULL() helper in class_unregister() to simplify code.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220822061922.3884113-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-01 18:15:40 +02:00
Wolfram Sang 07b7b883be driver_core: move from strlcpy with unused retval to strscpy
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.

Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220818205956.6528-1-wsa+renesas@sang-engineering.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-01 18:15:32 +02:00
Tejun Heo e2691f6b44 cgroup: Implement cgroup_file_show()
Add cgroup_file_show() which allows toggling visibility of a cgroup file
using the new kernfs_show(). This will be used to hide psi interface files
on cgroups where it's disabled.

Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220828050440.734579-10-tj@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-01 18:08:44 +02:00
Tejun Heo 783bd07d09 kernfs: Implement kernfs_show()
Currently, kernfs nodes can be created hidden and activated later by calling
kernfs_activate() to allow creation of multiple nodes to succeed or fail as
a unit. This is an one-way one-time-only transition. This patch introduces
kernfs_show() which can toggle visibility dynamically.

As the currently proposed use - toggling the cgroup pressure files - only
requires operating on leaf nodes, for the sake of simplicity, restrict it as
such for now.

Hiding uses the same mechanism as deactivation and likewise guarantees that
there are no in-flight operations on completion. KERNFS_ACTIVATED and
KERNFS_HIDDEN are used to manage the interactions between activations and
show/hide operations. A node is visible iff both activated & !hidden.

Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220828050440.734579-9-tj@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-01 18:08:44 +02:00
Tejun Heo f8eb145eb9 kernfs: Factor out kernfs_activate_one()
Factor out kernfs_activate_one() from kernfs_activate() and reorder
operations so that KERNFS_ACTIVATED now simply indicates whether activation
was attempted on the node ignoring whether activation took place. As the
flag doesn't have a reader, the refactoring and reordering shouldn't cause
any behavior difference.

Tested-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220828050440.734579-8-tj@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-01 18:08:44 +02:00
Tejun Heo c25491747b kernfs: Add KERNFS_REMOVING flags
KERNFS_ACTIVATED tracks whether a given node has ever been activated. As a
node was only deactivated on removal, this was used for

 1. Drain optimization (removed by the previous patch).
 2. To hide !activated nodes
 3. To avoid double activations
 4. Reject adding children to a node being removed
 5. Skip activaing a node which is being removed.

We want to decouple deactivation from removal so that nodes can be
deactivated and hidden dynamically, which makes KERNFS_ACTIVATED useless for
all of the above purposes.

#1 is already gone. #2 and #3 can instead test whether the node is currently
active. A new flag KERNFS_REMOVING is added to explicitly mark nodes which
are being removed for #4 and #5.

While this leaves KERNFS_ACTIVATED with no users, leave it be as it will be
used in a following patch.

Cc: Chengming Zhou <zhouchengming@bytedance.com>
Tested-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220828050440.734579-7-tj@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-01 18:08:44 +02:00
Tejun Heo 2d7f9f8c18 kernfs: Improve kernfs_drain() and always call on removal
__kernfs_remove() was skipping draining based on KERNFS_ACTIVATED - whether
the node has ever been activated since creation. Instead, update it to
always call kernfs_drain() which now drains or skips based on the precise
drain conditions. This ensures that the nodes will be deactivated and
drained regardless of their states.

This doesn't make meaningful difference now but will enable deactivating and
draining nodes dynamically by making removals safe when racing those
operations.

While at it, drop / update comments.

v2: Fix the inverted test on kernfs_should_drain_open_files() noted by
    Chengming. This was fixed by the next unrelated patch in the previous
    posting.

Cc: Chengming Zhou <zhouchengming@bytedance.com>
Tested-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220828050440.734579-6-tj@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-01 18:08:44 +02:00
Tejun Heo bdb2fd7fc5 kernfs: Skip kernfs_drain_open_files() more aggressively
Track the number of mmapped files and files that need to be released and
skip kernfs_drain_open_file() if both are zero, which are the precise
conditions which require draining open_files. The early exit test is
factored into kernfs_should_drain_open_files() which is now tested by
kernfs_drain_open_files()'s caller - kernfs_drain().

This isn't a meaningful optimization on its own but will enable future
stand-alone kernfs_deactivate() implementation.

v2: Chengming noticed that on->nr_to_release was leaking after ->open()
    failure. Fix it by telling kernfs_unlink_open_file() that it's called
    from the ->open() fail path and should dec the counter. Use kzalloc() to
    allocate kernfs_open_node so that the tracking fields are correctly
    initialized.

Cc: Chengming Zhou <zhouchengming@bytedance.com>
Tested-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220828050440.734579-5-tj@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-01 18:08:44 +02:00
Tejun Heo cf2dc9db93 kernfs: Refactor kernfs_get_open_node()
Factor out commont part. This is cleaner and should help with future
changes. No functional changes.

Tested-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220828050440.734579-4-tj@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-01 18:08:44 +02:00
Tejun Heo b52c2379c3 kernfs: Drop unnecessary "mutex" local variable initialization
These are unnecessary and unconventional. Remove them. Also move variable
declaration into the block that it's used. No functional changes.

Cc: Imran Khan <imran.f.khan@oracle.com>
Tested-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220828050440.734579-3-tj@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-01 18:08:44 +02:00
Tejun Heo 3db48aca87 kernfs: Simply by replacing kernfs_deref_open_node() with of_on()
kernfs_node->attr.open is an RCU pointer to kernfs_open_node. However, RCU
dereference is currently only used in kernfs_notify(). Everywhere else,
either we're holding the lock which protects it or know that the
kernfs_open_node is pinned becaused we have a pointer to a kernfs_open_file
which is hanging off of it.

kernfs_deref_open_node() is used for the latter case - accessing
kernfs_open_node from kernfs_open_file. The lifetime and visibility rules
are simple and clear here. To someone who can access a kernfs_open_file, its
kernfs_open_node is pinned and visible through of->kn->attr.open.

Replace kernfs_deref_open_node() which simpler of_on(). The former takes
both @kn and @of and RCU deref @kn->attr.open while sanity checking with
@of. The latter takes @of and uses protected deref on of->kn->attr.open.

As the return value can't be NULL, remove the error handling in the callers
too.

This shouldn't cause any functional changes.

Cc: Imran Khan <imran.f.khan@oracle.com>
Tested-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220828050440.734579-2-tj@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-01 18:08:43 +02:00
Christoph Hellwig 3954cf4338 devres: remove devm_ioremap_np
devm_ioremap_np has never been used anywhere since it was added in early
2021, so remove it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220822061424.151819-1-hch@lst.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-01 18:04:43 +02:00
Linus Torvalds 1c23f9e627 Linux 6.0-rc2 2022-08-21 17:32:54 -07:00
Linus Torvalds 4daa6a81c0 Misc irqchip fixes: LoongArch driver fixes and a Hyper-V IOMMU fix.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmMCnLoRHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1g9Yw/8DCoZnWpb0S1WBMgxBA/t1i4Y5+FHqF8B
 M/dbNqukryKsRaB70Lbif75691i3jV1E12X1apY9yP5weGEc4KDOhIVpcGLfN0L0
 39775FEtZ6Mncvifw7aZ8J9/hCr5ppQd7PC47nKgnNFA2m8DK9Uy6pNMWra/IMwx
 Aw39lfZQ2UwTgP+VH0Bt9klGgzuoZSndzMvMrG2xpqhQPJOkop/dRxvf0wVofOjB
 3V53nKSNiVZ1lTpDrF828cvErJf51P3kA7/iaO4CUSf+S/Xs0DPmSxBcVjpudZBc
 HBJFxDOhy6tjMb+WOAsvLikEl6K5wuHvP427VZhy1orXDQYFBuiF8xCh2tId61l0
 O/NFu6PA9EVEDEMtGR3kRPXWee1V8KKKngr091tE+0ErbCKrzh9dzG9qPrUZIgzW
 +RfiMfT1SjgbZcg9+CsJXCaImHEZKGBsRw70S6c8nUfKoWC6vdBcjKnLseThJKKe
 OLClYd2jsYV8PVASqLTMraDF9hPK5UokPvVCq/M5k7147Qd0spmlAsGov22i7/uf
 Yd4hud1W+Q1yTsabx0hBA0VNYO899BnRRjqrx+SayMoo7VHD/fAX7tFNjy0cpidw
 YdpxBkKzlWuNIACxeaA0vTNdNomelPYAmlniH/jTIhD6ts1Ym4gepyApE4Ccthvx
 uKJqvgY1KEM=
 =2sWM
 -----END PGP SIGNATURE-----

Merge tag 'irq-urgent-2022-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq fixes from Ingo Molnar:
 "Misc irqchip fixes: LoongArch driver fixes and a Hyper-V IOMMU fix"

* tag 'irq-urgent-2022-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/loongson-liointc: Fix an error handling path in liointc_init()
  irqchip/loongarch: Fix irq_domain_alloc_fwnode() abuse
  irqchip/loongson-pch-pic: Move find_pch_pic() into CONFIG_ACPI
  irqchip/loongson-eiointc: Fix a build warning
  irqchip/loongson-eiointc: Fix irq affinity setting
  iommu/hyper-v: Use helper instead of directly accessing affinity
2022-08-21 15:09:55 -07:00
Linus Torvalds 4f61f842d1 Fix a kprobes bug in JNG/JNLE emulation when a kprobe is
installed at such instructions, possibly resulting in
 incorrect execution (the wrong branch taken).
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmMCmzARHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1jt1RAAwd8PJDg9gkWMq+96B1RM5nAumTnbkngc
 4ylQr7+8bhFj4O+uKuBYC0S4D2ox+LeEPAD7x4+pFSLahB78HTytAtixKtKe1l0B
 h+AZBm35PfkUlHw52B/aCUW6DWKZOa6KrLQa8L1MqIGK8oiMiL+Q6+xXFQ8a6Gtt
 ZYR2yi1esM2tHzw6CdMasRYswGO1KnZlCzGB5lHyDdU/y7xTfOgCTd00K07augXA
 mLQOBqTZ9dWDaT9mdc+Uh9llHOOhhfzMDYlWxSpAUsdk6vCWiUz6Y+ybsYRlebEh
 yEjRzUkvchraGj0L04m35ulqvoYTSCjc4aP0JvNB7mZoIyicajngfoKEc8DJ0BMf
 dgZj3CoKuTrKbbp//hfK5rt5J0m0ueiixOFI4EM0kJVUAOG1zzWAbxEQTrWnJlZh
 /8l/4n4zUY3Ss9ecG9PzNs++YH8I+gDbQd2kGr6YMffqUW9HOb5j2yk3mXs8gH0n
 O8HBGP7I94w45Q8L1CDSD/Sdn+IrhtaGzpYTV7rCEiM13S4FwrnzpVoi3SJiVODM
 kAxM4HScWXygTQTqvz4I5T9ibOVGp8iRQRHfLRbNiX+xB8k8DSQWAE1vxsw2v5o+
 L8/N6mt71u/j5DyTzybTp1kepum+UjVH2RdH3v9ma3BQODkM+kbWq3cTBD6qOUh9
 HH8KnagQcgc=
 =eXIr
 -----END PGP SIGNATURE-----

Merge tag 'perf-urgent-2022-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 kprobes fix from Ingo Molnar:
 "Fix a kprobes bug in JNG/JNLE emulation when a kprobe is installed at
  such instructions, possibly resulting in incorrect execution (the
  wrong branch taken)"

* tag 'perf-urgent-2022-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kprobes: Fix JNG/JNLE emulation
2022-08-21 15:01:51 -07:00
Linus Torvalds 7fb312d225 Various fixes for tracing:
- Fix a return value of traceprobe_parse_event_name()
 
  - Fix NULL pointer dereference from failed ftrace enabling
 
  - Fix NULL pointer dereference when asking for registers from eprobes
 
  - Make eprobes consistent with kprobes/uprobes, filters and histograms
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYwKRrhQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qosDAP9WySmPxjoMfR0hbjmnepLy2zJtBbIq
 ABWR3LDrjvLlYwD9H/wrD+6ctOZtXh5XJc0Vn5z6XEyNtqrVGSse7Lm+sg4=
 =qb/R
 -----END PGP SIGNATURE-----

Merge tag 'trace-v6.0-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "Various fixes for tracing:

   - Fix a return value of traceprobe_parse_event_name()

   - Fix NULL pointer dereference from failed ftrace enabling

   - Fix NULL pointer dereference when asking for registers from eprobes

   - Make eprobes consistent with kprobes/uprobes, filters and
     histograms"

* tag 'trace-v6.0-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Have filter accept "common_cpu" to be consistent
  tracing/probes: Have kprobes and uprobes use $COMM too
  tracing/eprobes: Have event probes be consistent with kprobes and uprobes
  tracing/eprobes: Fix reading of string fields
  tracing/eprobes: Do not hardcode $comm as a string
  tracing/eprobes: Do not allow eprobes to use $stack, or % for regs
  ftrace: Fix NULL pointer dereference in is_ftrace_trampoline when ftrace is dead
  tracing/perf: Fix double put of trace event when init fails
  tracing: React to error return from traceprobe_parse_event_name()
2022-08-21 14:49:42 -07:00
Steven Rostedt (Google) b2380577d4 tracing: Have filter accept "common_cpu" to be consistent
Make filtering consistent with histograms. As "cpu" can be a field of an
event, allow for "common_cpu" to keep it from being confused with the
"cpu" field of the event.

Link: https://lkml.kernel.org/r/20220820134401.513062765@goodmis.org
Link: https://lore.kernel.org/all/20220820220920.e42fa32b70505b1904f0a0ad@kernel.org/

Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 1e3bac71c5 ("tracing/histogram: Rename "cpu" to "common_cpu"")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-08-21 15:56:08 -04:00
Steven Rostedt (Google) ab8384442e tracing/probes: Have kprobes and uprobes use $COMM too
Both $comm and $COMM can be used to get current->comm in eprobes and the
filtering and histogram logic. Make kprobes and uprobes consistent in this
regard and allow both $comm and $COMM as well. Currently kprobes and
uprobes only handle $comm, which is inconsistent with the other utilities,
and can be confusing to users.

Link: https://lkml.kernel.org/r/20220820134401.317014913@goodmis.org
Link: https://lore.kernel.org/all/20220820220442.776e1ddaf8836e82edb34d01@kernel.org/

Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 533059281e ("tracing: probeevent: Introduce new argument fetching code")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-08-21 15:56:08 -04:00
Steven Rostedt (Google) 6a832ec3d6 tracing/eprobes: Have event probes be consistent with kprobes and uprobes
Currently, if a symbol "@" is attempted to be used with an event probe
(eprobes), it will cause a NULL pointer dereference crash.

Both kprobes and uprobes can reference data other than the main registers.
Such as immediate address, symbols and the current task name. Have eprobes
do the same thing.

For "comm", if "comm" is used and the event being attached to does not
have the "comm" field, then make it the "$comm" that kprobes has. This is
consistent to the way histograms and filters work.

Link: https://lkml.kernel.org/r/20220820134401.136924220@goodmis.org

Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 7491e2c442 ("tracing: Add a probe that attaches to trace events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-08-21 15:56:08 -04:00
Steven Rostedt (Google) f04dec9346 tracing/eprobes: Fix reading of string fields
Currently when an event probe (eprobe) hooks to a string field, it does
not display it as a string, but instead as a number. This makes the field
rather useless. Handle the different kinds of strings, dynamic, static,
relational/dynamic etc.

Now when a string field is used, the ":string" type can be used to display
it:

  echo "e:sw sched/sched_switch comm=$next_comm:string" > dynamic_events

Link: https://lkml.kernel.org/r/20220820134400.959640191@goodmis.org

Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 7491e2c442 ("tracing: Add a probe that attaches to trace events")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-08-21 15:56:08 -04:00
Steven Rostedt (Google) 02333de90e tracing/eprobes: Do not hardcode $comm as a string
The variable $comm is hard coded as a string, which is true for both
kprobes and uprobes, but for event probes (eprobes) it is a field name. In
most cases the "comm" field would be a string, but there's no guarantee of
that fact.

Do not assume that comm is a string. Not to mention, it currently forces
comm fields to fault, as string processing for event probes is currently
broken.

Link: https://lkml.kernel.org/r/20220820134400.756152112@goodmis.org

Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 7491e2c442 ("tracing: Add a probe that attaches to trace events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-08-21 15:56:08 -04:00
Steven Rostedt (Google) 2673c60ee6 tracing/eprobes: Do not allow eprobes to use $stack, or % for regs
While playing with event probes (eprobes), I tried to see what would
happen if I attempted to retrieve the instruction pointer (%rip) knowing
that event probes do not use pt_regs. The result was:

 BUG: kernel NULL pointer dereference, address: 0000000000000024
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: 0000 [#1] PREEMPT SMP PTI
 CPU: 1 PID: 1847 Comm: trace-cmd Not tainted 5.19.0-rc5-test+ #309
 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01
v03.03 07/14/2016
 RIP: 0010:get_event_field.isra.0+0x0/0x50
 Code: ff 48 c7 c7 c0 8f 74 a1 e8 3d 8b f5 ff e8 88 09 f6 ff 4c 89 e7 e8
50 6a 13 00 48 89 ef 5b 5d 41 5c 41 5d e9 42 6a 13 00 66 90 <48> 63 47 24
8b 57 2c 48 01 c6 8b 47 28 83 f8 02 74 0e 83 f8 04 74
 RSP: 0018:ffff916c394bbaf0 EFLAGS: 00010086
 RAX: ffff916c854041d8 RBX: ffff916c8d9fbf50 RCX: ffff916c255d2000
 RDX: 0000000000000000 RSI: ffff916c255d2008 RDI: 0000000000000000
 RBP: 0000000000000000 R08: ffff916c3a2a0c08 R09: ffff916c394bbda8
 R10: 0000000000000000 R11: 0000000000000000 R12: ffff916c854041d8
 R13: ffff916c854041b0 R14: 0000000000000000 R15: 0000000000000000
 FS:  0000000000000000(0000) GS:ffff916c9ea40000(0000)
knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000024 CR3: 000000011b60a002 CR4: 00000000001706e0
 Call Trace:
  <TASK>
  get_eprobe_size+0xb4/0x640
  ? __mod_node_page_state+0x72/0xc0
  __eprobe_trace_func+0x59/0x1a0
  ? __mod_lruvec_page_state+0xaa/0x1b0
  ? page_remove_file_rmap+0x14/0x230
  ? page_remove_rmap+0xda/0x170
  event_triggers_call+0x52/0xe0
  trace_event_buffer_commit+0x18f/0x240
  trace_event_raw_event_sched_wakeup_template+0x7a/0xb0
  try_to_wake_up+0x260/0x4c0
  __wake_up_common+0x80/0x180
  __wake_up_common_lock+0x7c/0xc0
  do_notify_parent+0x1c9/0x2a0
  exit_notify+0x1a9/0x220
  do_exit+0x2ba/0x450
  do_group_exit+0x2d/0x90
  __x64_sys_exit_group+0x14/0x20
  do_syscall_64+0x3b/0x90
  entry_SYSCALL_64_after_hwframe+0x46/0xb0

Obviously this is not the desired result.

Move the testing for TPARG_FL_TPOINT which is only used for event probes
to the top of the "$" variable check, as all the other variables are not
used for event probes. Also add a check in the register parsing "%" to
fail if an event probe is used.

Link: https://lkml.kernel.org/r/20220820134400.564426983@goodmis.org

Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 7491e2c442 ("tracing: Add a probe that attaches to trace events")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-08-21 15:56:08 -04:00
Yang Jihong c3b0f72e80 ftrace: Fix NULL pointer dereference in is_ftrace_trampoline when ftrace is dead
ftrace_startup does not remove ops from ftrace_ops_list when
ftrace_startup_enable fails:

register_ftrace_function
  ftrace_startup
    __register_ftrace_function
      ...
      add_ftrace_ops(&ftrace_ops_list, ops)
      ...
    ...
    ftrace_startup_enable // if ftrace failed to modify, ftrace_disabled is set to 1
    ...
  return 0 // ops is in the ftrace_ops_list.

When ftrace_disabled = 1, unregister_ftrace_function simply returns without doing anything:
unregister_ftrace_function
  ftrace_shutdown
    if (unlikely(ftrace_disabled))
            return -ENODEV;  // return here, __unregister_ftrace_function is not executed,
                             // as a result, ops is still in the ftrace_ops_list
    __unregister_ftrace_function
    ...

If ops is dynamically allocated, it will be free later, in this case,
is_ftrace_trampoline accesses NULL pointer:

is_ftrace_trampoline
  ftrace_ops_trampoline
    do_for_each_ftrace_op(op, ftrace_ops_list) // OOPS! op may be NULL!

Syzkaller reports as follows:
[ 1203.506103] BUG: kernel NULL pointer dereference, address: 000000000000010b
[ 1203.508039] #PF: supervisor read access in kernel mode
[ 1203.508798] #PF: error_code(0x0000) - not-present page
[ 1203.509558] PGD 800000011660b067 P4D 800000011660b067 PUD 130fb8067 PMD 0
[ 1203.510560] Oops: 0000 [#1] SMP KASAN PTI
[ 1203.511189] CPU: 6 PID: 29532 Comm: syz-executor.2 Tainted: G    B   W         5.10.0 #8
[ 1203.512324] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 1203.513895] RIP: 0010:is_ftrace_trampoline+0x26/0xb0
[ 1203.514644] Code: ff eb d3 90 41 55 41 54 49 89 fc 55 53 e8 f2 00 fd ff 48 8b 1d 3b 35 5d 03 e8 e6 00 fd ff 48 8d bb 90 00 00 00 e8 2a 81 26 00 <48> 8b ab 90 00 00 00 48 85 ed 74 1d e8 c9 00 fd ff 48 8d bb 98 00
[ 1203.518838] RSP: 0018:ffffc900012cf960 EFLAGS: 00010246
[ 1203.520092] RAX: 0000000000000000 RBX: 000000000000007b RCX: ffffffff8a331866
[ 1203.521469] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 000000000000010b
[ 1203.522583] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffff8df18b07
[ 1203.523550] R10: fffffbfff1be3160 R11: 0000000000000001 R12: 0000000000478399
[ 1203.524596] R13: 0000000000000000 R14: ffff888145088000 R15: 0000000000000008
[ 1203.525634] FS:  00007f429f5f4700(0000) GS:ffff8881daf00000(0000) knlGS:0000000000000000
[ 1203.526801] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1203.527626] CR2: 000000000000010b CR3: 0000000170e1e001 CR4: 00000000003706e0
[ 1203.528611] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1203.529605] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Therefore, when ftrace_startup_enable fails, we need to rollback registration
process and remove ops from ftrace_ops_list.

Link: https://lkml.kernel.org/r/20220818032659.56209-1-yangjihong1@huawei.com

Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-08-21 15:56:07 -04:00
Steven Rostedt (Google) 7249921d94 tracing/perf: Fix double put of trace event when init fails
If in perf_trace_event_init(), the perf_trace_event_open() fails, then it
will call perf_trace_event_unreg() which will not only unregister the perf
trace event, but will also call the put() function of the tp_event.

The problem here is that the trace_event_try_get_ref() is called by the
caller of perf_trace_event_init() and if perf_trace_event_init() returns a
failure, it will then call trace_event_put(). But since the
perf_trace_event_unreg() already called the trace_event_put() function, it
triggers a WARN_ON().

 WARNING: CPU: 1 PID: 30309 at kernel/trace/trace_dynevent.c:46 trace_event_dyn_put_ref+0x15/0x20

If perf_trace_event_reg() does not call the trace_event_try_get_ref() then
the perf_trace_event_unreg() should not be calling trace_event_put(). This
breaks symmetry and causes bugs like these.

Pull out the trace_event_put() from perf_trace_event_unreg() and call it
in the locations that perf_trace_event_unreg() is called. This not only
fixes this bug, but also brings back the proper symmetry of the reg/unreg
vs get/put logic.

Link: https://lore.kernel.org/all/cover.1660347763.git.kjlx@templeofstupid.com/
Link: https://lkml.kernel.org/r/20220816192817.43d5e17f@gandalf.local.home

Cc: stable@vger.kernel.org
Fixes: 1d18538e6a ("tracing: Have dynamic events have a ref counter")
Reported-by: Krister Johansen <kjlx@templeofstupid.com>
Reviewed-by: Krister Johansen <kjlx@templeofstupid.com>
Tested-by: Krister Johansen <kjlx@templeofstupid.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-08-21 15:56:07 -04:00
Lukas Bulwahn d8a64313c1 tracing: React to error return from traceprobe_parse_event_name()
The function traceprobe_parse_event_name() may set the first two function
arguments to a non-null value and still return -EINVAL to indicate an
unsuccessful completion of the function. Hence, it is not sufficient to
just check the result of the two function arguments for being not null,
but the return value also needs to be checked.

Commit 95c104c378 ("tracing: Auto generate event name when creating a
group of events") changed the error-return-value checking of the second
traceprobe_parse_event_name() invocation in __trace_eprobe_create() and
removed checking the return value to jump to the error handling case.

Reinstate using the return value in the error-return-value checking.

Link: https://lkml.kernel.org/r/20220811071734.20700-1-lukas.bulwahn@gmail.com

Fixes: 95c104c378 ("tracing: Auto generate event name when creating a group of events")
Acked-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-08-21 15:56:07 -04:00
Linus Torvalds e3f259d33c This pull request includes a revert to fix a regression introduced this
merge window and a fix for proper error handling in the remove path of
 the iMX driver.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEOZGx6rniZ1Gk92RdFA3kzBSgKbYFAmMB7uEACgkQFA3kzBSg
 KbYvKg//RruLCRCyz7txzbQ+Wk3v4eBnKv0n0uekQe7u/Ku68MWEn5F+oqmYwjXI
 wCGOvXaXkDlPp1qeBmKLsGDodzWhgbnD5KREB5z8veffHCVne6IEF2A7bRlS77JB
 qGuq1nWFx++s3IzwF4mA4ZbVlk/UnoE9tAEu63SgFFugaunTuC9DelVufza8nsUU
 2K0fv+eKaZdxGCO8HJkAX9nKnxqZHYfYm1bSsH/rna0RGqBWhBxfqDVKVphzju0n
 wLB0s8gQzmR+QPqRIvoeZJHwoUZrFZGcZisOtB4LiGmyp23GIPocaEeOAyEd/9/o
 G6cZP5T8I1Wx03jOIQF3+y/a61lG+fOzDcWeH8LvE2Ku9XFY1pn70jWk69CZv/bw
 JfX+5XHOsP/llm1FNhV2VIIC3oIVdc0hDcrFLKLiPxOrVQ/DdYWlJLfYtXO6G0CU
 IHEHChZBpUGwE37Rb5f3NikVIMrRP4JvXUSRkAPQbW5Vsek/Z7QBf+8Ugba5D0Xh
 /qQQ11M7IZZCqXXJkDaOUdAFYF2dRkSwYDzp/Wtyu2Q6NzoosNkuRqQkExIrPhv1
 4ldwCy8hNkFG6kstlgJ3s8hx8DHvH6CK4mHMozXjMZ8FoUt1lOvuHPGWLsvHxPpl
 shKzjxUYFVuZxFr3487RK8978uO19khBA1FDt1OYj6Fbs8kfRDg=
 =aSFj
 -----END PGP SIGNATURE-----

Merge tag 'i2c-for-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "A revert to fix a regression introduced this merge window and a fix
  for proper error handling in the remove path of the iMX driver"

* tag 'i2c-for-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: imx: Make sure to unregister adapter on remove()
  Revert "i2c: scmi: Replace open coded device_get_match_data()"
2022-08-21 11:18:33 -07:00
Linus Torvalds 367bcbc5b5 5 cifs/smb3 fixes, one for stable
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmMBX5YACgkQiiy9cAdy
 T1GNGgv/bH2tKQ+xOSoHgAUB8x5C1qWCba1KqmF/1e86QWkEaOy3APPH0D4whm2T
 KsO9bI2xLAO7TnsGjr+llPRWLE4uyL3tg4PRuoHJdLlq0UibvWcd7crtRfJtyNOm
 E8S0ouJ0+0Dv026c3KKovYrnHtin/I/KLZp57W1qmslyJEaHflxW4RqEOROLYTjK
 FpEtKyMO1/ivcK6s8l2RcNMcHqkx+HZvzNub4hAdUJOTf8DJ2lLc/PjfDtB4HQlE
 d+Pant1zdZaehZcymzk6x8oq1LIgfVgkFTWJyrr/FLJq2S8E/XbC54tdzTfIySsY
 F5So874fBm6Eal+0qxdm4cYbrE+YjeKwyTHlY836D0InOHxT2noE8i0KSNCP9sfj
 K/gt4SmxkxMASUycZ5rmOvhw/RghOSWtTNTQeiU1fheuXBaCe+dKgdAEQXdqQ0Kt
 I4gCuT6eGRdz9J6AVVIzsaYZFODRlBh50AMS3xkrRlqJ1jxn0E3Zuu3DTTleeknW
 IgGiZ7LC
 =dod2
 -----END PGP SIGNATURE-----

Merge tag '6.0-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs client fixes from Steve French:

 - memory leak fix

 - two small cleanups

 - trivial strlcpy removal

 - update missing entry for cifs headers in MAINTAINERS file

* tag '6.0-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: move from strlcpy with unused retval to strscpy
  cifs: Fix memory leak on the deferred close
  cifs: remove useless parameter 'is_fsctl' from SMB2_ioctl()
  cifs: remove unused server parameter from calc_smb_size()
  cifs: missing directory in MAINTAINERS file
2022-08-21 10:21:16 -07:00
Nick Desaulniers a0a12c3ed0 asm goto: eradicate CC_HAS_ASM_GOTO
GCC has supported asm goto since 4.5, and Clang has since version 9.0.0.
The minimum supported versions of these tools for the build according to
Documentation/process/changes.rst are 5.1 and 11.0.0 respectively.

Remove the feature detection script, Kconfig option, and clean up some
fallback code that is no longer supported.

The removed script was also testing for a GCC specific bug that was
fixed in the 4.7 release.

Also remove workarounds for bpftrace using clang older than 9.0.0, since
other BPF backend fixes are required at this point.

Link: https://lore.kernel.org/lkml/CAK7LNATSr=BXKfkdW8f-H5VT_w=xBpT2ZQcZ7rm6JfkdE+QnmA@mail.gmail.com/
Link: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=48637
Acked-by: Borislav Petkov <bp@suse.de>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-08-21 10:06:28 -07:00
Uwe Kleine-König d98bdd3a5b i2c: imx: Make sure to unregister adapter on remove()
If for whatever reasons pm_runtime_resume_and_get() fails and .remove() is
exited early, the i2c adapter stays around and the irq still calls its
handler, while the driver data and the register mapping go away. So if
later the i2c adapter is accessed or the irq triggers this results in
havoc accessing freed memory and unmapped registers.

So unregister the software resources even if resume failed, and only skip
the hardware access in that case.

Fixes: 588eb93ea4 ("i2c: imx: add runtime pm support to improve the performance")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-21 10:27:33 +02:00
Wolfram Sang 3df71d7064 Revert "i2c: scmi: Replace open coded device_get_match_data()"
This reverts commit 9ae551ded5. We got a
regression report, so ensure this machine boots again. We will come back
with a better version hopefully.

Reported-by: Josef Johansson <josef@oderland.se>
Link: https://lore.kernel.org/r/4d2d5b04-0b6c-1cb1-a63f-dc06dfe1b5da@oderland.se
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-21 10:27:07 +02:00
Linus Torvalds 15b3f48a43 Kbuild fixes for v6.0
- Fix module versioning broken on some architectures
 
  - Make dummy-tools enable CONFIG_PPC_LONG_DOUBLE_128
 
  - Remove -Wformat-zero-length, which has no warning instance
 
  - Fix the order between drivers and libs in modules.order
 
  - Fix false-positive warnings in clang-analyzer
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmMBIU4VHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsGOQ8P/2Utxt5AJKZlwpW6kXDHWg5z9pXr
 wxZmevYPHPawIKMdNVbluhNejehHrtRahWNdU+daXpVllOWoOig9wW79ZxoNJvXj
 0WxI02wI0oqU97vOGtD8R4+ZvoC6AMdLeAwlPOI1Bm3ZEPb5s0CdbBDDjEeUrNCa
 SvJQ8uIghzJqnQVSs743VyFg5p6tJxhkAUgZZo+I+KfcTJxgjs7XbkgMcbyAJ6WC
 p/s9i+sJcgP8dL59ffmIrdv3AQx6YYw8tUahupDkr+++V6VvxXvVDbrrej1jNVg4
 h//doEzfTKDB90jI6BDw0WzEcQfe09ALkh2yvIdR2d9G1ogZ+PC6kUgbJKegx86r
 FRlAyi8ntMVOzV3JtNRUfxQb5/j35v8a8B37VD9YTEROGIqGU3gW6olmCdN9vA8s
 8HVOZOHIgIrRT7L5cUGfOC0eoloPdpAo1usMzS8zsegqlhr/inDIDnZKjD5vepAx
 LdEpfkGTkcMB1Sp5YjVbKJj7rQk9x0nyJh306MhMSkJYd2SgI7Xuvt1UOzWa98Sz
 oLYbjbLKKRix8jLfQ9AohQSL4KeJazbdJ6B6umgDGz+ZvxxTPM3MQt+H3YcOctBy
 0wLyxSGqZloVyF1DCNvvwP55psuX2cSFMB4bsKg1pqlymxlDjAGII5aUrofSY0w8
 a8MYKgntjNHZndaT
 =jk33
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-fixes-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix module versioning broken on some architectures

 - Make dummy-tools enable CONFIG_PPC_LONG_DOUBLE_128

 - Remove -Wformat-zero-length, which has no warning instance

 - Fix the order between drivers and libs in modules.order

 - Fix false-positive warnings in clang-analyzer

* tag 'kbuild-fixes-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  scripts/clang-tools: Remove DeprecatedOrUnsafeBufferHandling check
  kbuild: fix the modules order between drivers and libs
  scripts/Makefile.extrawarn: Do not disable clang's -Wformat-zero-length
  kbuild: dummy-tools: pretend we understand __LONG_DOUBLE_128__
  modpost: fix module versioning when a symbol lacks valid CRC
2022-08-20 14:55:38 -07:00
Linus Torvalds 16b3d851c0 perf tools fixes for v6.0: 1st batch
- Fix alignment for cpu map masks in event encoding.
 
 - Support reading PERF_FORMAT_LOST, perf tool counterpart for a feature
   that was added in this merge window.
 
 - Sync perf tools copies of kernel headers: socket, msr-index, fscrypt,
   cpufeatures, i915_drm, kvm, vhost, perf_event.
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYv/jZAAKCRCyPKLppCJ+
 J5ZWAP9P7qMcKppgzYqnHU7TX2tJoT7WbYpaf2lp0TkIpynKdAD9E+9FjbAnQznN
 90DIIH/BljChgiUTkMxHaAl789XL1gU=
 =UXWB
 -----END PGP SIGNATURE-----

Merge tag 'perf-tools-fixes-for-v6.0-2022-08-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix alignment for cpu map masks in event encoding.

 - Support reading PERF_FORMAT_LOST, perf tool counterpart for a feature
   that was added in this merge window.

 - Sync perf tools copies of kernel headers: socket, msr-index, fscrypt,
   cpufeatures, i915_drm, kvm, vhost, perf_event.

* tag 'perf-tools-fixes-for-v6.0-2022-08-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf tools: Support reading PERF_FORMAT_LOST
  libperf: Add a test case for read formats
  libperf: Handle read format in perf_evsel__read()
  tools headers UAPI: Sync linux/perf_event.h with the kernel sources
  tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
  tools headers UAPI: Sync KVM's vmx.h header with the kernel sources
  tools include UAPI: Sync linux/vhost.h with the kernel sources
  tools headers kvm s390: Sync headers with the kernel sources
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  tools headers cpufeatures: Sync with the kernel sources
  tools headers UAPI: Sync linux/fscrypt.h with the kernel sources
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  perf beauty: Update copy of linux/socket.h with the kernel sources
  perf cpumap: Fix alignment for masks in event encoding
  perf cpumap: Compute mask size in constant time
  perf cpumap: Synthetic events and const/static
  perf cpumap: Const map for max()
2022-08-20 14:46:05 -07:00