Pull networking fixes from David Miller:
1) Free AF_PACKET po->rollover properly, from Willem de Bruijn.
2) Read SFP eeprom in max 16 byte increments to avoid problems with
some SFP modules, from Russell King.
3) Fix UDP socket lookup wrt. VRF, from Tim Beale.
4) Handle route invalidation properly in s390 qeth driver, from Julian
Wiedmann.
5) Memory leak on unload in RDS, from Zhu Yanjun.
6) sctp_process_init leak, from Neil HOrman.
7) Fix fib_rules rule insertion semantic change that broke Android,
from Hangbin Liu.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits)
pktgen: do not sleep with the thread lock held.
net: mvpp2: Use strscpy to handle stat strings
net: rds: fix memory leak in rds_ib_flush_mr_pool
ipv6: fix EFAULT on sendto with icmpv6 and hdrincl
ipv6: use READ_ONCE() for inet->hdrincl as in ipv4
Revert "fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL not supplied"
net: aquantia: fix wol configuration not applied sometimes
ethtool: fix potential userspace buffer overflow
Fix memory leak in sctp_process_init
net: rds: fix memory leak when unload rds_rdma
ipv6: fix the check before getting the cookie in rt6_get_cookie
ipv4: not do cache for local delivery if bc_forwarding is enabled
s390/qeth: handle error when updating TX queue count
s390/qeth: fix VLAN attribute in bridge_hostnotify udev event
s390/qeth: check dst entry before use
s390/qeth: handle limited IPv4 broadcast in L3 TX path
net: fix indirect calls helpers for ptype list hooks.
net: ipvlan: Fix ipvlan device tso disabled while NETIF_F_IP_CSUM is set
udp: only choose unbound UDP socket for multicast when not in a VRF
net/tls: replace the sleeping lock around RX resync with a bit lock
...
When doing a loopback test at copper ports, the serdes loopback
and the phy loopback will fail, because of the adjust link had
not finished, and phy not ready.
Adds sleep between adjust link and test process to fix it.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The hns driver of earlier devices, when autoneg off, restart autoneg
will return -EINVAL, so make the hns driver for the latest devices
do the same.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to pass extack together with NETDEV_PRE_UP notifications, it's
necessary to route the extack to __dev_open() from diverse (possibly
indirect) callers. One prominent API through which the notification is
invoked is dev_open().
Therefore extend dev_open() with and extra extack argument and update
all users. Most of the calls end up just encoding NULL, but bond and
team drivers have the extack readily available.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If there are packets in hardware when changing the speed
or duplex, it may cause hardware hang up.
This patch adds netif_carrier_off before change speed and
duplex in ethtool_ops.set_link_ksettings, and adds
netif_carrier_on after complete the change.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 114788 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following sparse warning:
drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c:73:20: warning: symbol 'hns_ae_get_handle' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c:332:6: warning: symbol 'hns_ae_stop' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c:360:6: warning: symbol 'hns_ae_toggle_ring_irq' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c:580:6: warning: symbol 'hns_ae_update_stats' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c:663:6: warning: symbol 'hns_ae_get_stats' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c:695:6: warning: symbol 'hns_ae_get_strings' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c:728:5: warning: symbol 'hns_ae_get_sset_count' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c:774:6: warning: symbol 'hns_ae_update_led_status' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c:786:5: warning: symbol 'hns_ae_cpld_set_led_id' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c:798:6: warning: symbol 'hns_ae_get_regs' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c:823:5: warning: symbol 'hns_ae_get_regs_len' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_gmac.c:342:6: warning: symbol 'hns_gmac_update_stats' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c:934:12: warning: symbol 'hns_mac_get_vaddr' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_mac.c:953:5: warning: symbol 'hns_mac_get_cfg' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c:343:6: warning: symbol 'hns_dsaf_srst_chns' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c:366:1: warning: symbol 'hns_dsaf_srst_chns_acpi' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c:373:6: warning: symbol 'hns_dsaf_roce_srst' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c:387:6: warning: symbol 'hns_dsaf_roce_srst_acpi' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c:571:5: warning: symbol 'hns_mac_get_sfp_prsnt' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c:589:5: warning: symbol 'hns_mac_get_sfp_prsnt_acpi' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:31:12: warning: symbol 'g_dsaf_mode_match' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:45:5: warning: symbol 'hns_dsaf_get_cfg' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:962:6: warning: symbol 'hns_dsaf_tcam_addr_get' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:2087:6: warning: symbol 'hns_dsaf_port_work_rate_cfg' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_main.c:2837:5: warning: symbol 'hns_dsaf_roce_reset' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c:76:5: warning: symbol 'hns_ppe_common_get_cfg' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c:107:6: warning: symbol 'hns_ppe_common_free_cfg' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_ppe.c:340:6: warning: symbol 'hns_ppe_uninit_ex' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.c:708:5: warning: symbol 'hns_rcb_get_ring_num' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_rcb.c:744:14: warning: symbol 'hns_rcb_common_get_vaddr' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_dsaf_xgmac.c:314:6: warning: symbol 'hns_xgmac_update_stats' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_enet.c:1303:6: warning: symbol 'hns_nic_update_stats' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_enet.c:1585:6: warning: symbol 'hns_nic_poll_controller' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_enet.c:1938:6: warning: symbol 'hns_set_multicast_list' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_enet.c:1960:6: warning: symbol 'hns_nic_set_rx_mode' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:661:6: warning: symbol 'hns_get_ringparam' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:811:6: warning: symbol 'hns_get_channels' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:828:6: warning: symbol 'hns_get_ethtool_stats' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:886:6: warning: symbol 'hns_get_strings' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:976:5: warning: symbol 'hns_get_sset_count' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:1010:5: warning: symbol 'hns_phy_led_set' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:1032:5: warning: symbol 'hns_set_phys_id' was not declared. Should it be static?
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:1106:6: warning: symbol 'hns_get_regs' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver implementation returns support for private flags, while
no private flags are present. When asked for the number of private
flags it returns the number of statistic flag names.
Fix this by returning EOPNOTSUPP for not implemented ethtool flags.
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When deal with low and high throughput, it is hard to achiece both
high performance and low latency. In order to achiece that, this patch
calculates the rx rate, and adjust the interrupt coalesce parameter
accordingly.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Tested-by: Weiwei Deng <dengweiwei@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no need to cast away return value of dev_close.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use function set_loopback in phy_driver to setup phy loopback
when doing ethtool self test.
Signed-off-by: Lin Yun Sheng <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Two entries being added at the same time to the IFLA
policy table, whilst parallel bug fixes to decnet
routing dst handling overlapping with the dst gc removal
in net-next.
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the phy loopback self_test failed issue. when
Marvell Phy Module is loaded, it will powerdown fiber when doing
phy loopback self test, which cause phy loopback self_test fail.
Signed-off-by: Lin Yun Sheng <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make return value void since function never return meaningfull value
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes some checkpatch.pl script caught errors and
warnings during the compilation time.
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a bug on Hip06 that tx ring interrupts packets count will be
clear when drivers send data to tx ring, so that the tx packets count
will never upgrade to packets line, and cause the interrupts engendered
was delayed.
Sometimes, it will cause sending performance lower than expected.
To fix this bug, we set tx ring interrupts packets line to 1 forever,
to avoid count clear. And set the gap time to 20us, to solve the problem
that too many interrupts engendered when packets line is 1.
This patch could advance the send performance on ARM from 6.6G to 9.37G
when an iperf send thread on ARM and an iperf send thread on X86 for XGE.
Signed-off-by: lipeng <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When run ethtool ethX on hns driver, the speed will show
as "Unknown". The base.speed is not correct assigned,
this patch fix this bug.
Signed-off-by: Daode Huang <huangdaode@hisilicon.com>
Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When set auto-negotiation off and duplex half, if run "ethtool -r ethX"
on port with phy, then the port will be failed to work. It should
forbid to start auto-negotiation when auto-negotiate is off. This
patch add the limited condition.
Reported-by: Jinchuang Tian <tianjinchuang1@huawei.com>
Signed-off-by: Daode Huang <huangdaode@hisilicon.com>
Reviewed-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Reviewed-by: lipeng <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Small patch set for hns net driver that the roce patches depend on
- Various fixes to the hns-roce driver
- Add connection manager support to the hns-roce driver
-----BEGIN PGP SIGNATURE-----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=PmmI
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull more rdma updates from Doug Ledford:
"This merge window was the first where Huawei had to try and coordinate
their patches between their net driver and their new roce driver
(similar to mlx4 and mlx5).
They didn't do horribly, but there were some issues (and we knew that
because they simply didn't know what to do in the beginning). As a
result, I had a set of patches that depended on some patches that
normally would have come to you via Dave's tree. Those patches have
been on netdev@ for a while, so I got Dave to give me his approval to
send them to you. As such, the other 29 patches I had behind them are
also now ready to go.
This catches the hns and hns-roce drivers up to current, and for
future patches we are working with them to get them up to speed on how
to do joint driver development so that they don't have these sorts of
cross tree dependency issues again. BTW, Dave gave me permission to
add his Acked-by: to the patches against the net tree, but I've had
this branch through 0day (but not linux-next since it was off by
itself) and I didn't want to rebase the series just to add Dave's ack
for the 8 patches in the net area.
Updates to the hns drivers:
- Small patch set for hns net driver that the roce patches depend on
- Various fixes to the hns-roce driver
- Add connection manager support to the hns-roce driver"
* tag 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (36 commits)
IB/hns: Fix for removal of redundant code
IB/hns: Delete the redundant lines in hns_roce_v1_m_qp()
IB/hns: Fix the bug when platform_get_resource() exec fail
IB/hns: Update the rq head when modify qp state
IB/hns: Cq has not been freed
IB/hns: Validate mtu when modified qp
IB/hns: Some items of qpc need to take user param
IB/hns: The Ack timeout need a lower limit value
IB/hns: Return bad wr while post send failed
IB/hns: Fix bug of memory leakage for registering user mr
IB/hns: Modify the init of iboe lock
IB/hns: Optimize code of aeq and ceq interrupt handle and fix the bug of qpn
IB/hns: Delete the sqp_start from the structure hns_roce_caps
IB/hns: Fix bug of clear hem
IB/hns: Remove unused parameter named qp_type
IB/hns: Simplify function of pd alloc and qp alloc
IB/hns: Fix bug of using uninit refcount and free
IB/hns: Remove parameters of resize cq
IB/hns: Remove unused parameters in some functions
IB/hns: Add node_guid definition to the bindings document
...
After running command "ethtool -t eth0", eth0 can not be connected to
network. It is caused by the changing the inner loopback register and
this register cannot be changed when hns connected to network. The
routine of setting this register needs to be removed and using promisc
mode to let the packet looped back pass by dsaf mode.
Reported-by: Jun He <hjat2005@huawei.com>
Signed-off-by: Kejian Yan <yankejian@huawei.com>
Reviewed-by: Yisen Zhaung <yisen.zhuang@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The private structure contain a pointer to phydev, but the structure
net_device already contain such pointer. So we can remove the pointer
phydev in the private structure, and update the driver to use the
one contained in struct net_device.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check for ethtool_ops structures that are only stored in the ethtool_ops
field of a net_device structure or passed as the second argument to
netdev_set_default_ethtool_ops. These contexts are declared const, so
ethtool_ops structures that have these properties can be declared as const
also.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct ethtool_ops i@p = { ... };
@ok1@
identifier r.i;
struct net_device e;
position p;
@@
e.ethtool_ops = &i@p;
@ok2@
identifier r.i;
expression e;
position p;
@@
netdev_set_default_ethtool_ops(e, &i@p)
@bad@
position p != {r.p,ok1.p,ok2.p};
identifier r.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct ethtool_ops i = { ... };
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is PORT_TP type if the service port is GE mode. It is wrong to
judge the port type by using if it is service port. Adding the media
type to know port type.
Reported-by: Jinchuan Tian <tianjinchuan1@huawei.com>
Signed-off-by: Kejian Yan <yankejian@huawei.com>
Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds get_coalesce_range api for hns, it shows
range of coalesce usecs and frames that can be set on
this interface.
Signed-off-by: Daode Huang <huangdaode@hisilicon.com>
Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For debug-ports,there are two non-synchronized processes:
Speed-Auto-Negotiation and Link-Update-Status. The two
processes are towed by two different state machines.
Bond reads the speed when link up, but the speed maybe
not update the right value at that time.That make for bond's
wrong speed. Thus only one state machine should be used and
if phy_state_machine is used, it does not need to do
hns_nic_update_link_status().
Signed-off-by: Qianqian Xie <xieqianqian@huawei.com>
Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When run ethtool cmd(ethtool -t ethx) again and again for a long
time, it will be probabilistically fail. The PHYs' registers may
be on different pages, so it must be switch to the right page
before setting PHYs' registers.
And __lb_up() calls phy_start() to startup the PHYs device, but
this function may change Copper Control Register(Page 0, Register 0)
to an other value. It would cause phy loopback test fail. if we
remove phy_start(), we have to remove the relative phy_stop(),
phy_disconnect() when doing phy loopback to keep the phy stay in
right status.
Reported-by: hejun <hjat2005@huawei.com>
Signed-off-by: Kejian Yan <yankejian@huawei.com>
Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As device_node is only used by DT case, HNS needs to treat the other
cases including ACPI. It needs to use uniform ways to handle both of
DT and ACPI. This patch chooses phy_device, and of_phy_connect and
of_phy_attach are only used by DT case. It needs to use uniform interface
to handle that sequence by both DT and ACPI.
Signed-off-by: Kejian Yan <yankejian@huawei.com>
Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the statement
assert(priv || priv->ae_handle);
the right side of || is only evaluated if priv is null.
v2:
As suggested by David Leight and David Miller the assert
statements are removed.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
It may fail to set coalesce usecs to HW, and Ethtool needs to know if it
is successful to cfg the parameter or not. So it needs return the errno by
dsaf.ko.
Signed-off-by: Lisheng <lisheng011@huawei.com>
Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The return values in the first two functions mdiobus_write()
are ignored. The patch will fix it.
Signed-off-by: Qianqian Xie <xieqianqian@huawei.com>
Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If trying to get receive flow hash indirection table by ethtool, it needs
to call .get_rxnfc to get ring number first. So this patch implements the
.get_rxnfc of ethtool. And the data type of rss_indir_table is u32, it has
to be multiply by the width of data type when using memcpy.
Signed-off-by: Kejian Yan <yankejian@huawei.com>
Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Both .get_rxfh and .set_rxfh are always return 0, it should return result
from hardware when getting or setting rss. And the rss function should
return the correct data type.
Signed-off-by: Kejian Yan <yankejian@huawei.com>
Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It will always be passed if the soc is tested the loopback cases. This
patch will fix this bug.
Signed-off-by: Kejian Yan <yankejian@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Not all devices attached to an MDIO bus are phys. So add an
mdio_device structure to represent the generic parts of an mdio
device, and place this structure into the phy_device.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since we have a phydev, make use of it and the phy_read() function.
This will help with later refactoring.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the support of "RSS (Receive Side Scaling)" feature
provided by the Hip06 ethernet hardware to the HNS ethernet
driver.
This feature helps in distributing the different flows (mapped as
hash by hardware using Toeplitz Hash) to different Queues asssociated
with the processor cores. The mapping of flow-hash values to the
different queues is stored in indirection table (which is per Packet-
parse-Engine/PPE). This patch also provides the changes to re-program
the (flow-hash<->Qid) mapping using the ethtool.
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Reviewed-by: Kenneth Lee <liguozhu@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patchset adds support of Hisilicon Hip06 SoC to the existing HNS
ethernet driver.
The changes in the driver are mainly due to changes in the DMA
descriptor provided by the Hip06 ethernet hardware. These changes
need to co-exist with already present Hip05 DMA descriptor and its
operating functions. The decision to choose the correct type of DMA
descriptor is taken dynamically depending upon the version of the
hardware (i.e. V1/hip05 or V2/hip06, see already existing
hisilicon-hns-nic.txt binding file for detailed description). other
changes includes in SBM, DSAF and PPE modules as well. Changes
affecting the driver related to the newly added ethernet hardware
features in Hip06 would be added as separate patch over this and
subsequent patches.
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: yankejian <yankejian@huawei.com>
Signed-off-by: huangdaode <huangdaode@hisilicon.com>
Signed-off-by: lipeng <lipeng321@huawei.com>
Signed-off-by: lisheng <lisheng011@huawei.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
before this patch, hns driver only permits user to set the net device
by using ethtool -s when the device is link up. it is obviously not so
good. it needs to be set no matter it is link up or down. so this patch
fixes this issue.
Signed-off-by: yankejian <yankejian@huawei.com>
Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: lisheng <lisheng011@huawei.com>
Signed-off-by: lipeng <lipeng321@huawei.com>
Signed-off-by: Chenny Xu <chenny.xu@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Many drivers initialize uselessly n_priv_flags, n_stats, testinfo_len,
eedump_len & regdump_len fields in their .get_drvinfo() ethtool op.
It's not necessary as these fields is filled in ethtool_get_drvinfo().
v2: removed unused variable
v3: removed another unused variable
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is to add basic ethernet support for HNS. It is one of the way to
use the HNS acceleration engine. But most of the decoding/encoding
capability of the AE cannot be used in this way.
This submit contains the basic feature as a ethernet driver. More will
be added later.
Signed-off-by: huangdaode <huangdaode@hisilicon.com>
Signed-off-by: Kenneth Lee <liguozhu@huawei.com>
Signed-off-by: Yisen Zhuang <Yisen.Zhuang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds
Yonglong Liu
Thomas Gleixner
Petr Machata
Peng Li
Gustavo A. R. Silva
YueHaibing
Matthias Brugger
Lin Yun Sheng
stephen hemminger
David S. Miller
yuval.shaia@oracle.com
Salil
Daode Huang
Kejian Yan
Philippe Reynes
Julia Lawall
Qianqian Xie
xypron.glpk@gmx.de
Lisheng
Andrew Lunn
Chenny Xu
Ivan Vecera