The userland aoetools package includes an "aoe-stat" command that can
display a "payload size" column when the aoe driver exports this
information. Users can quickly see what amount of user data is
transferred inside each AoE command on the network, network headers
excluded.
Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The GPFS filesystem is an example of an aoe user that requires the aoe
driver to support I/O request sizes larger than the default. Most users
will not need large I/O request sizes, because they would need to be split
up into multiple AoE commands anyway.
Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Users sometimes want to cause the aoe driver to forget a particular
previously discovered device when it is no longer online. The aoetools
provide an "aoe-flush" command that users run to perform this
administrative task. The changes below provide the support needed in the
driver.
Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The ATA over Ethernet config query response contains a "buffer count"
field reflecting the AoE target's capacity to buffer incoming AoE
commands.
By taking the current value of this field into accound, we increase
performance throughput or avoid network congestion, when the value
has increased or decreased, respectively.
Signed-off-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dropped transmits are not common, but when they do occur, increasing
the transmit queue length often helps.
Signed-off-by: Ed Cashin <ecashin@coraid.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The context feature of sparse is used with the Linux kernel sources to
check for imbalanced uses of locks. Document the annotations defined in
include/linux/compiler.h that tell sparse what to expect when a lock is
held on function entry, exit, or both.
Signed-off-by: Ed Cashin <ecashin@coraid.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Christopher Li <sparse@chrisli.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
linux/compiler.h has macros to denote functions that acquire or release
locks, but not to denote functions called with a lock held that return
with the lock still held. Add a __must_hold macro to cover that case.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reported-by: Ed Cashin <ecashin@coraid.com>
Tested-by: Ed Cashin <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To avoid an explosion of request_module calls on a chain of abusive
scripts, fail maximum recursion with -ELOOP instead of -ENOEXEC. As soon
as maximum recursion depth is hit, the error will fail all the way back
up the chain, aborting immediately.
This also has the side-effect of stopping the user's shell from attempting
to reexecute the top-level file as a shell script. As seen in the
dash source:
if (cmd != path_bshell && errno == ENOEXEC) {
*argv-- = cmd;
*argv = cmd = path_bshell;
goto repeat;
}
The above logic was designed for running scripts automatically that lacked
the "#!" header, not to re-try failed recursion. On a legitimate -ENOEXEC,
things continue to behave as the shell expects.
Additionally, when tracking recursion, the binfmt handlers should not be
involved. The recursion being tracked is the depth of calls through
search_binary_handler(), so that function should be exclusively responsible
for tracking the depth.
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: halfdog <me@halfdog.net>
Cc: P J P <ppandit@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We display a list of supplementary group for each process in
/proc/<pid>/status. However, we show only the first 32 groups, not all of
them.
Although this is rare, but sometimes processes do have more than 32
supplementary groups, and this kernel limitation breaks user-space apps
that rely on the group list in /proc/<pid>/status.
Number 32 comes from the internal NGROUPS_SMALL macro which defines the
length for the internal kernel "small" groups buffer. There is no
apparent reason to limit to this value.
This patch removes the 32 groups printing limit.
The Linux kernel limits the amount of supplementary groups by NGROUPS_MAX,
which is currently set to 65536. And this is the maximum count of groups
we may possibly print.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is currently impossible to examine the state of seccomp for a given
process. While attaching with gdb and attempting "call
prctl(PR_GET_SECCOMP,...)" will work with some situations, it is not
reliable. If the process is in seccomp mode 1, this query will kill the
process (prctl not allowed), if the process is in mode 2 with prctl not
allowed, it will similarly be killed, and in weird cases, if prctl is
filtered to return errno 0, it can look like seccomp is disabled.
When reviewing the state of running processes, there should be a way to
externally examine the seccomp mode. ("Did this build of Chrome end up
using seccomp?" "Did my distro ship ssh with seccomp enabled?")
This adds the "Seccomp" line to /proc/$pid/status.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: James Morris <jmorris@namei.org>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
During c/r sessions we've found that there is no way at the moment to
fetch some VMA associated flags, such as mlock() and madvise().
This leads us to a problem -- we don't know if we should call for mlock()
and/or madvise() after restore on the vma area we're bringing back to
life.
This patch intorduces a new field into "smaps" output called VmFlags,
where all set flags associated with the particular VMA is shown as two
letter mnemonics.
[ Strictly speaking for c/r we only need mlock/madvise bits but it has been
said that providing just a few flags looks somehow inconsistent. So all
flags are here now. ]
This feature is made available on CONFIG_CHECKPOINT_RESTORE=n kernels, as
other applications may start to use these fields.
The data is encoded in a somewhat awkward two letters mnemonic form, to
encourage userspace to be prepared for fields being added or removed in
the future.
[a.p.zijlstra@chello.nl: props to use for_each_set_bit]
[sfr@canb.auug.org.au: props to use array instead of struct]
[akpm@linux-foundation.org: overall redesign and simplification]
[akpm@linux-foundation.org: remove unneeded braces per sfr, avoid using bloaty for_each_set_bit()]
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Without this patch it is really hard to interpret a bounding set, if
CAP_LAST_CAP is unknown for a current kernel.
Non-existant capabilities can not be deleted from a bounding set with help
of prctl.
E.g.: Here are two examples without/with this patch.
CapBnd: ffffffe0fdecffff
CapBnd: 00000000fdecffff
I suggest to hide non-existent capabilities. Here is two reasons.
* It's logically and easier for using.
* It helps to checkpoint-restore capabilities of tasks, because tasks
can be restored on another kernel, where CAP_LAST_CAP is bigger.
Signed-off-by: Andrew Vagin <avagin@openvz.org>
Cc: Andrew G. Morgan <morgan@kernel.org>
Reviewed-by: Serge E. Hallyn <serge.hallyn@canonical.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ptrace jailers want to be sure that the tracee can never escape
from the control. However if the tracer dies unexpectedly the
tracee continues to run in potentially unsafe mode.
Add the new ptrace option PTRACE_O_EXITKILL. If the tracer exits
it sends SIGKILL to every tracee which has this bit set.
Note that the new option is not equal to the last-option << 1. Because
currently all options have an event, and the new one starts the eventless
group. It uses the random 20 bit, so we have the room for 12 more events,
but we can also add the new eventless options below this one.
Suggested by Amnon Shiloh.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: Amnon Shiloh <u3557@miso.sublimeip.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: Chris Evans <scarybeasts@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Update the documentation for simple_strto* to reflect that it has been
obsoleted and advise the usage of kstrto*.
Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Joe Perches <joe@perches.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Rob Landley <rob@landley.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As Bruce Fields pointed out, kstrto* is currently lacking kerneldoc
comments. This patch adds kerneldoc comments to common variants of
kstrto*: kstrto(u)l, kstrto(u)ll and kstrto(u)int.
Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Joe Perches <joe@perches.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Rob Landley <rob@landley.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
keys-ecryptfs.txt was missing from 00-INDEX.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Option parsing code expects an unsigned integer for the codepage option,
but prefixes and stores this option with "cp" before passing to
load_nls(). This makes the displayed option in /proc an invalid one.
Strip the prefix when printing so that the displayed option is valid for
reuse.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
parse_options() is supposed to return value < 0 on error however we
returned 0 (success) in a lot of cases. This actually was not a problem
in practice because match_token() used by parse_options() is clever and
catches most of the problems for us.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
So far FAT either offsets time stamps by sys_tz.minuteswest or leaves them
as they are (when tz=UTC mount option is used). However in some cases it
is useful if one can specify time stamp offset on his own (e.g. when time
zone of the camera connected is different from time zone of the computer,
or when HW clock is in UTC and thus sys_tz.minuteswest == 0).
So provide a mount option time_offset= which allows user to specify offset
in minutes that should be applied to time stamps on the filesystem.
akpm: this code would work incorrectly when used via `mount -o remount',
because cached inodes would not be updated. But fatfs's fat_remount() is
basically a no-op anyway.
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change fatfs so that a warning is emitted when an attempt is made to mount
a filesystem with the unsupported `discard' option.
ext4 aready does this: http://patchwork.ozlabs.org/patch/192668/
Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Amit Sahrawat <amit.sahrawat83@gmail.com>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A driver for the DA9055 PMIC. This has a dependency upon the DA9055 MFD
core.
Functionally tested on Samsung SMDKV6410.
Signed-off-by: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This eliminates having an #ifdef returning NULL for the case when OF is
disabled.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Enabling RTC HW block depends on the default value of TPS65910 register.
In some mode, RTC block is disabled by default.(eg. AM3517 Craneboard) In
this case, RTC_PWDN(RTC power down) bit should be cleared to enable the
RTC HW block.
This patch also works in case that RTC block is active by default, because
there is no side effect even if the bit is updated again.
Tested on AM3517 Craneboard.
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Acked-by: Venu Byravarasu <vbyravarasu@nvidia.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Sivaram Nair <sivaramn@nvidia.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This code is under #if 0 and not used.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
rtc-s3c driver is modified to use devm_request_and_ioremap() (combining
request_mem_region and ioremap), devm_clk_get() and devm_request_irq()
APIs. Since this removes the necessity of freeing the related resources
the return path is also simplified.
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
err_nores label redirects to a simple return statement. Move the return
statement to caller location and remove the label.
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add an RTC driver for PCF8523 chips by NXP Semiconductors. No support is
currently provided for the alarm and interrupt functions. Only the time
and date functionality is implemented.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use devm_kzalloc() and remove the error path free and the unload free as
devm functions take care of freeing resources.
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Miguel Aguilar <miguel.aguilar@ridgerun.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
rtc_device_register() returns a pointer containing error code in case
of error. Use that in the error return.
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Miguel Aguilar <miguel.aguilar@ridgerun.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A cosmetic change to rename the irq name to match the device name.
Signed-off-by: Sivaram Nair <sivaramn@nvidia.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The applications can set the RTC hardware to trigger interrupts in one
of three modes:
* AIE: Alarm interrupt
* UIE: Update interrupt (ie: once per second)
* PIE: Periodic interrupt (sub-second irqs)
The above defined 3 modes are to be supported in the RTC HW in form of
interrupts. The SPEAr RTC hardware does not support the later two modes.
There have been refinements in the RTC core in mainline related to
use of timer queue infrastructure to manage events in RTC. Please refer
the below mentioned patch for details:
* RTC: Rework RTC code to use timerqueue for events
* SHA ID: 6610e0893b
There have been provisions added to support hardware that do not have
support the UIE mode. Please refer the following patch.
* rtc: Provide flag for rtc devices that don't support UIE
* SHA ID: 4a649903f9
The patch makes use of the provision defined in the above patch to
update the hardware status of UIE mode.
Signed-off-by: Deepak Sikri <deepak.sikri@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
clk_{un}prepare is mandatory for platforms using common clock framework.
Because for SPEAr we don't do anything in clk_{un}prepare() calls, just
call them once in probe/remove.
Signed-off-by: Deepak Sikri <deepak.sikri@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Free the rtc-spear driver from tension of freeing resources :) devm_*
derivatives of multiple routines are used while allocating resources,
which would be freed automatically by kernel.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Deepak Sikri <deepak.sikri@st.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In case of error, test_init() needs to call platform_device_del() instead
of platform_device_unregister(). Otherwise, we may call
platform_device_put() twice.
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
[akpm@linux-foundation.org: improve label naming]
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add device tree support to the rtc-imxdi driver.
Signed-off-by: Roland Stigge <stigge@antcom.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Enable support for i.MX53 in addition to i.MX25 by enabling the driver on
ARCH_MXC generally.
Signed-off-by: Roland Stigge <stigge@antcom.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
OMAP1 RTC driver is used in multiple devices like, OMAPL138 and AM33XX.
Driver currently doesn't handle any clocks, which may be right for OMAP1
architecture but in case of AM33XX, the clock/module needs to be enabled
in order to access the registers.
So convert this driver to runtime pm, which internally handles rest.
[afzal@ti.com: handle error path]
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Daniel Mack <zonque@gmail.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
rtc-omap driver can be reused for AM33xx RTC. Provide dependency in
Kconfig.
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Daniel Mack <zonque@gmail.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Enhance rtc-omap driver with DT capability
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Daniel Mack <zonque@gmail.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
rtc-omap driver is now capable of handling kicker mechanism, hence remove
kicker handling at platform level, instead provide proper device name so
that driver can handle kicker mechanism by itself
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Daniel Mack <zonque@gmail.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
OMAP RTC IP can have kicker feature. This prevents spurious writes to
register. To write to registers kicker lock has to be released.
Procedure to do it as follows,
1. write to kick0 register, 0x83e70b13
2. write to kick1 register, 0x95a4f1e0
Writing value other than 0x83e70b13 to kick0 enables write locking, more
details about kicker mechanism can be found in section 20.3.3.5.3 of
AM335X TRM @www.ti.com/am335x
Here id table information is added and is used to distinguish those that
require kicker handling and the ones that doesn't need it. There are more
features in the newer IP's compared to legacy ones other than kicker,
which driver currently doesn't handle, supporting additional features
would be easier with the addition of id table.
Older IP (of OMAP1) doesn't have revision register as per TRM, so revision
register can't be relied always to find features, hence id table is being
used.
While at it, replace __raw_writeb/__raw_readb with writeb/readb; this
driver is used on ARMv7 (AM335X SoC)
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Daniel Mack <zonque@gmail.com>
Cc: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If elf_core_dump() is called and fill_note_info() fails in the kmalloc()
then it returns 0 but has not yet initialised all the needed fields. As a
result we do a kfree(randomness) after correctly skipping the thread data.
[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Store the camelcase variables in a hash and only emit a warning on the
first use of each new variable.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Even though the kernel doesn't support using floating point constants,
add a regex for them.
Support forms like: 0x123p1, 123e-1, 1.23, 1.5e23f
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ed Cashin
Josh Triplett
Gao feng
Kees Cook
Artem Bityutskiy
Cyrill Gorcunov
Andrew Vagin
Oleg Nesterov
Eldad Zack
Jarkko Sakkinen
Dave Reisner
Jan Kara
Namjae Jeon
Ashish Jangam
Sachin Kamat
Kim, Milo
Tushar Behera
Thierry Reding
Devendra Naga
Sivaram Nair
Deepak Sikri
Viresh Kumar
Wei Yongjun
Roland Stigge
Vaibhav Hiremath
Afzal Mohammed
Alan Cox
Joe Perches